From: Aman Kumar <aman.kumar@vvdntech.in>
To: dev@dpdk.org
Cc: rasland@nvidia.com, asafp@nvidia.com, shys@nvidia.com,
viacheslavo@nvidia.com, akozyrev@nvidia.com, matan@nvidia.com,
anatoly.burakov@intel.com, keesang.song@amd.com,
aman.kumar@vvdntech.in, jerinjacobk@gmail.com
Subject: [dpdk-dev] [PATCH v2 1/2] lib/eal: add amd epyc2 memcpy routine to eal
Date: Tue, 19 Oct 2021 16:17:23 +0530 [thread overview]
Message-ID: <20211019104724.19416-1-aman.kumar@vvdntech.in> (raw)
In-Reply-To: <20210823084411.29592-1-aman.kumar@vvdntech.in>
This patch provides rte_memcpy* calls optimized for
AMD EPYC platforms. Use config/x86/x86_amd_epyc_linux_gcc
as cross-file with meson to build dpdk for AMD EPYC platforms.
Signed-off-by: Aman Kumar <aman.kumar@vvdntech.in>
---
config/x86/meson.build | 7 +
config/x86/x86_amd_epyc_linux_gcc | 16 +
lib/eal/x86/include/rte_memcpy.h | 502 ++++++++++++++++++++++++++++++
3 files changed, 525 insertions(+)
create mode 100644 config/x86/x86_amd_epyc_linux_gcc
diff --git a/config/x86/meson.build b/config/x86/meson.build
index 29f3dea181..598b0e62ce 100644
--- a/config/x86/meson.build
+++ b/config/x86/meson.build
@@ -72,3 +72,10 @@ endif
dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
dpdk_conf.set('RTE_MAX_LCORE', 128)
dpdk_conf.set('RTE_MAX_NUMA_NODES', 32)
+
+if meson.is_cross_build()
+ if meson.get_cross_property('platform') == 'amd-epyc'
+ dpdk_conf.set('RTE_MAX_LCORE', 512)
+ dpdk_conf.set('RTE_MEMCPY_AMDEPYC', 1)
+ endif
+endif
diff --git a/config/x86/x86_amd_epyc_linux_gcc b/config/x86/x86_amd_epyc_linux_gcc
new file mode 100644
index 0000000000..0b2453135f
--- /dev/null
+++ b/config/x86/x86_amd_epyc_linux_gcc
@@ -0,0 +1,16 @@
+[binaries]
+c = 'x86_64-linux-gnu-gcc'
+cpp = 'x86_64-linux-gnu-g++'
+ld = 'x86_64-linux-gnu-ld'
+ar = 'x86_64-linux-gnu-ar'
+strip = 'x86_64-linux-gnu-strip'
+pkgconfig = 'x86_64-linux-gnu-pkg-config'
+
+[host_machine]
+system = 'linux'
+cpu_family = 'x86_64'
+cpu = 'native'
+endian = 'little'
+
+[properties]
+platform = 'amd-epyc'
diff --git a/lib/eal/x86/include/rte_memcpy.h b/lib/eal/x86/include/rte_memcpy.h
index 79f381dd9b..8f66c115e3 100644
--- a/lib/eal/x86/include/rte_memcpy.h
+++ b/lib/eal/x86/include/rte_memcpy.h
@@ -368,6 +368,498 @@ rte_mov128blocks(uint8_t *dst, const uint8_t *src, size_t n)
}
}
+#if defined RTE_MEMCPY_AMDEPYC
+
+/**
+ * Copy 16 bytes from one location to another,
+ * with temporal stores
+ */
+static __rte_always_inline void
+rte_copy16_ts(uint8_t *dst, uint8_t *src)
+{
+ __m128i var128;
+
+ var128 = _mm_stream_load_si128((__m128i *)src);
+ _mm_storeu_si128((__m128i *)dst, var128);
+}
+
+/**
+ * Copy 32 bytes from one location to another,
+ * with temporal stores
+ */
+static __rte_always_inline void
+rte_copy32_ts(uint8_t *dst, uint8_t *src)
+{
+ __m256i ymm0;
+
+ ymm0 = _mm256_stream_load_si256((const __m256i *)src);
+ _mm256_storeu_si256((__m256i *)dst, ymm0);
+}
+
+/**
+ * Copy 64 bytes from one location to another,
+ * with temporal stores
+ */
+static __rte_always_inline void
+rte_copy64_ts(uint8_t *dst, uint8_t *src)
+{
+ rte_copy32_ts(dst + 0 * 32, src + 0 * 32);
+ rte_copy32_ts(dst + 1 * 32, src + 1 * 32);
+}
+
+/**
+ * Copy 128 bytes from one location to another,
+ * with temporal stores
+ */
+static __rte_always_inline void
+rte_copy128_ts(uint8_t *dst, uint8_t *src)
+{
+ rte_copy32_ts(dst + 0 * 32, src + 0 * 32);
+ rte_copy32_ts(dst + 1 * 32, src + 1 * 32);
+ rte_copy32_ts(dst + 2 * 32, src + 2 * 32);
+ rte_copy32_ts(dst + 3 * 32, src + 3 * 32);
+}
+
+/**
+ * Copy len bytes from one location to another,
+ * with temporal stores 16B aligned
+ */
+static __rte_always_inline void *
+rte_memcpy_aligned_tstore16_generic(void *dst, void *src, int len)
+{
+ void *dest = dst;
+
+ while (len >= 128) {
+ rte_copy128_ts((uint8_t *)dst, (uint8_t *)src);
+ dst = (uint8_t *)dst + 128;
+ src = (uint8_t *)src + 128;
+ len -= 128;
+ }
+ while (len >= 64) {
+ rte_copy64_ts((uint8_t *)dst, (uint8_t *)src);
+ dst = (uint8_t *)dst + 64;
+ src = (uint8_t *)src + 64;
+ len -= 64;
+ }
+ while (len >= 32) {
+ rte_copy32_ts((uint8_t *)dst, (uint8_t *)src);
+ dst = (uint8_t *)dst + 32;
+ src = (uint8_t *)src + 32;
+ len -= 32;
+ }
+ if (len >= 16) {
+ rte_copy16_ts((uint8_t *)dst, (uint8_t *)src);
+ dst = (uint8_t *)dst + 16;
+ src = (uint8_t *)src + 16;
+ len -= 16;
+ }
+ if (len >= 8) {
+ *(uint64_t *)dst = *(const uint64_t *)src;
+ dst = (uint8_t *)dst + 8;
+ src = (uint8_t *)src + 8;
+ len -= 8;
+ }
+ if (len >= 4) {
+ *(uint32_t *)dst = *(const uint32_t *)src;
+ dst = (uint8_t *)dst + 4;
+ src = (uint8_t *)src + 4;
+ len -= 4;
+ }
+ if (len != 0) {
+ dst = (uint8_t *)dst - (4 - len);
+ src = (uint8_t *)src - (4 - len);
+ *(uint32_t *)dst = *(const uint32_t *)src;
+ }
+
+ return dest;
+}
+
+static __rte_always_inline void *
+rte_memcpy_aligned_ntload_tstore16_amdepyc2(void *dst,
+ const void *src,
+ size_t size)
+{
+ asm volatile goto("movq %0, %%rsi\n\t"
+ "movq %1, %%rdi\n\t"
+ "movq %2, %%rdx\n\t"
+ "cmpq $(128), %%rdx\n\t"
+ "jb 202f\n\t"
+ "201:\n\t"
+ "vmovntdqa (%%rsi), %%ymm0\n\t"
+ "vmovntdqa 32(%%rsi), %%ymm1\n\t"
+ "vmovntdqa 64(%%rsi), %%ymm2\n\t"
+ "vmovntdqa 96(%%rsi), %%ymm3\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, 32(%%rdi)\n\t"
+ "vmovdqu %%ymm2, 64(%%rdi)\n\t"
+ "vmovdqu %%ymm3, 96(%%rdi)\n\t"
+ "addq $128, %%rsi\n\t"
+ "addq $128, %%rdi\n\t"
+ "subq $128, %%rdx\n\t"
+ "jz %l[done]\n\t"
+ "cmpq $128, %%rdx\n\t" /*Vector Size 32B. */
+ "jae 201b\n\t"
+ "202:\n\t"
+ "cmpq $64, %%rdx\n\t"
+ "jb 203f\n\t"
+ "vmovntdqa (%%rsi), %%ymm0\n\t"
+ "vmovntdqa 32(%%rsi), %%ymm1\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, 32(%%rdi)\n\t"
+ "addq $64, %%rsi\n\t"
+ "addq $64, %%rdi\n\t"
+ "subq $64, %%rdx\n\t"
+ "jz %l[done]\n\t"
+ "203:\n\t"
+ "cmpq $32, %%rdx\n\t"
+ "jb 204f\n\t"
+ "vmovntdqa (%%rsi), %%ymm0\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "addq $32, %%rsi\n\t"
+ "addq $32, %%rdi\n\t"
+ "subq $32, %%rdx\n\t"
+ "jz %l[done]\n\t"
+ "204:\n\t"
+ "cmpb $16, %%dl\n\t"
+ "jb 205f\n\t"
+ "vmovntdqa (%%rsi), %%xmm0\n\t"
+ "vmovdqu %%xmm0, (%%rdi)\n\t"
+ "addq $16, %%rsi\n\t"
+ "addq $16, %%rdi\n\t"
+ "subq $16, %%rdx\n\t"
+ "jz %l[done]\n\t"
+ "205:\n\t"
+ "cmpb $2, %%dl\n\t"
+ "jb 208f\n\t"
+ "cmpb $4, %%dl\n\t"
+ "jbe 207f\n\t"
+ "cmpb $8, %%dl\n\t"
+ "jbe 206f\n\t"
+ "movq -8(%%rsi,%%rdx), %%rcx\n\t"
+ "movq (%%rsi), %%rsi\n\t"
+ "movq %%rcx, -8(%%rdi,%%rdx)\n\t"
+ "movq %%rsi, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "206:\n\t"
+ "movl -4(%%rsi,%%rdx), %%ecx\n\t"
+ "movl (%%rsi), %%esi\n\t"
+ "movl %%ecx, -4(%%rdi,%%rdx)\n\t"
+ "movl %%esi, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "207:\n\t"
+ "movzwl -2(%%rsi,%%rdx), %%ecx\n\t"
+ "movzwl (%%rsi), %%esi\n\t"
+ "movw %%cx, -2(%%rdi,%%rdx)\n\t"
+ "movw %%si, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "208:\n\t"
+ "movzbl (%%rsi), %%ecx\n\t"
+ "movb %%cl, (%%rdi)"
+ :
+ : "r"(src), "r"(dst), "r"(size)
+ : "rcx", "rdx", "rsi", "rdi", "ymm0", "ymm1", "ymm2", "ymm3", "memory"
+ : done
+ );
+done:
+ return dst;
+}
+
+static __rte_always_inline void *
+rte_memcpy_generic(void *dst, const void *src, size_t len)
+{
+ asm goto("movq %0, %%rsi\n\t"
+ "movq %1, %%rdi\n\t"
+ "movq %2, %%rdx\n\t"
+ "movq %%rdi, %%rax\n\t"
+ "cmp $32, %%rdx\n\t"
+ "jb 101f\n\t"
+ "cmp $(32 * 2), %%rdx\n\t"
+ "ja 108f\n\t"
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu -32(%%rsi,%%rdx), %%ymm1\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, -32(%%rdi,%%rdx)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+ "101:\n\t"
+ /* Less than 1 VEC. */
+ "cmpb $32, %%dl\n\t"
+ "jae 103f\n\t"
+ "cmpb $16, %%dl\n\t"
+ "jae 104f\n\t"
+ "cmpb $8, %%dl\n\t"
+ "jae 105f\n\t"
+ "cmpb $4, %%dl\n\t"
+ "jae 106f\n\t"
+ "cmpb $1, %%dl\n\t"
+ "ja 107f\n\t"
+ "jb 102f\n\t"
+ "movzbl (%%rsi), %%ecx\n\t"
+ "movb %%cl, (%%rdi)\n\t"
+ "102:\n\t"
+ "jmp %l[done]\n\t"
+ "103:\n\t"
+ /* From 32 to 63. No branch when size == 32. */
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu -32(%%rsi,%%rdx), %%ymm1\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, -32(%%rdi,%%rdx)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+ /* From 16 to 31. No branch when size == 16. */
+ "104:\n\t"
+ "vmovdqu (%%rsi), %%xmm0\n\t"
+ "vmovdqu -16(%%rsi,%%rdx), %%xmm1\n\t"
+ "vmovdqu %%xmm0, (%%rdi)\n\t"
+ "vmovdqu %%xmm1, -16(%%rdi,%%rdx)\n\t"
+ "jmp %l[done]\n\t"
+ "105:\n\t"
+ /* From 8 to 15. No branch when size == 8. */
+ "movq -8(%%rsi,%%rdx), %%rcx\n\t"
+ "movq (%%rsi), %%rsi\n\t"
+ "movq %%rcx, -8(%%rdi,%%rdx)\n\t"
+ "movq %%rsi, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "106:\n\t"
+ /* From 4 to 7. No branch when size == 4. */
+ "movl -4(%%rsi,%%rdx), %%ecx\n\t"
+ "movl (%%rsi), %%esi\n\t"
+ "movl %%ecx, -4(%%rdi,%%rdx)\n\t"
+ "movl %%esi, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "107:\n\t"
+ /* From 2 to 3. No branch when size == 2. */
+ "movzwl -2(%%rsi,%%rdx), %%ecx\n\t"
+ "movzwl (%%rsi), %%esi\n\t"
+ "movw %%cx, -2(%%rdi,%%rdx)\n\t"
+ "movw %%si, (%%rdi)\n\t"
+ "jmp %l[done]\n\t"
+ "108:\n\t"
+ /* More than 2 * VEC and there may be overlap between destination */
+ /* and source. */
+ "cmpq $(32 * 8), %%rdx\n\t"
+ "ja 111f\n\t"
+ "cmpq $(32 * 4), %%rdx\n\t"
+ "jb 109f\n\t"
+ /* Copy from 4 * VEC to 8 * VEC, inclusively. */
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu 32(%%rsi), %%ymm1\n\t"
+ "vmovdqu (32 * 2)(%%rsi), %%ymm2\n\t"
+ "vmovdqu (32 * 3)(%%rsi), %%ymm3\n\t"
+ "vmovdqu -32(%%rsi,%%rdx), %%ymm4\n\t"
+ "vmovdqu -(32 * 2)(%%rsi,%%rdx), %%ymm5\n\t"
+ "vmovdqu -(32 * 3)(%%rsi,%%rdx), %%ymm6\n\t"
+ "vmovdqu -(32 * 4)(%%rsi,%%rdx), %%ymm7\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, 32(%%rdi)\n\t"
+ "vmovdqu %%ymm2, (32 * 2)(%%rdi)\n\t"
+ "vmovdqu %%ymm3, (32 * 3)(%%rdi)\n\t"
+ "vmovdqu %%ymm4, -32(%%rdi,%%rdx)\n\t"
+ "vmovdqu %%ymm5, -(32 * 2)(%%rdi,%%rdx)\n\t"
+ "vmovdqu %%ymm6, -(32 * 3)(%%rdi,%%rdx)\n\t"
+ "vmovdqu %%ymm7, -(32 * 4)(%%rdi,%%rdx)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+ "109:\n\t"
+ /* Copy from 2 * VEC to 4 * VEC. */
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu 32(%%rsi), %%ymm1\n\t"
+ "vmovdqu -32(%%rsi,%%rdx), %%ymm2\n\t"
+ "vmovdqu -(32 * 2)(%%rsi,%%rdx), %%ymm3\n\t"
+ "vmovdqu %%ymm0, (%%rdi)\n\t"
+ "vmovdqu %%ymm1, 32(%%rdi)\n\t"
+ "vmovdqu %%ymm2, -32(%%rdi,%%rdx)\n\t"
+ "vmovdqu %%ymm3, -(32 * 2)(%%rdi,%%rdx)\n\t"
+ "vzeroupper\n\t"
+ "110:\n\t"
+ "jmp %l[done]\n\t"
+ "111:\n\t"
+ "cmpq %%rsi, %%rdi\n\t"
+ "ja 113f\n\t"
+ /* Source == destination is less common. */
+ "je 110b\n\t"
+ /* Load the first VEC and last 4 * VEC to
+ * support overlapping addresses.
+ */
+ "vmovdqu (%%rsi), %%ymm4\n\t"
+ "vmovdqu -32(%%rsi, %%rdx), %%ymm5\n\t"
+ "vmovdqu -(32 * 2)(%%rsi, %%rdx), %%ymm6\n\t"
+ "vmovdqu -(32 * 3)(%%rsi, %%rdx), %%ymm7\n\t"
+ "vmovdqu -(32 * 4)(%%rsi, %%rdx), %%ymm8\n\t"
+ /* Save start and stop of the destination buffer. */
+ "movq %%rdi, %%r11\n\t"
+ "leaq -32(%%rdi, %%rdx), %%rcx\n\t"
+ /* Align destination for aligned stores in the loop. Compute */
+ /* how much destination is misaligned. */
+ "movq %%rdi, %%r8\n\t"
+ "andq $(32 - 1), %%r8\n\t"
+ /* Get the negative of offset for alignment. */
+ "subq $32, %%r8\n\t"
+ /* Adjust source. */
+ "subq %%r8, %%rsi\n\t"
+ /* Adjust destination which should be aligned now. */
+ "subq %%r8, %%rdi\n\t"
+ /* Adjust length. */
+ "addq %%r8, %%rdx\n\t"
+ /* Check non-temporal store threshold. */
+ "cmpq $(1024*1024), %%rdx\n\t"
+ "ja 115f\n\t"
+ "112:\n\t"
+ /* Copy 4 * VEC a time forward. */
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu 32(%%rsi), %%ymm1\n\t"
+ "vmovdqu (32 * 2)(%%rsi), %%ymm2\n\t"
+ "vmovdqu (32 * 3)(%%rsi), %%ymm3\n\t"
+ "addq $(32 * 4), %%rsi\n\t"
+ "subq $(32 * 4), %%rdx\n\t"
+ "vmovdqa %%ymm0, (%%rdi)\n\t"
+ "vmovdqa %%ymm1, 32(%%rdi)\n\t"
+ "vmovdqa %%ymm2, (32 * 2)(%%rdi)\n\t"
+ "vmovdqa %%ymm3, (32 * 3)(%%rdi)\n\t"
+ "addq $(32 * 4), %%rdi\n\t"
+ "cmpq $(32 * 4), %%rdx\n\t"
+ "ja 112b\n\t"
+ /* Store the last 4 * VEC. */
+ "vmovdqu %%ymm5, (%%rcx)\n\t"
+ "vmovdqu %%ymm6, -32(%%rcx)\n\t"
+ "vmovdqu %%ymm7, -(32 * 2)(%%rcx)\n\t"
+ "vmovdqu %%ymm8, -(32 * 3)(%%rcx)\n\t"
+ /* Store the first VEC. */
+ "vmovdqu %%ymm4, (%%r11)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+ "113:\n\t"
+ /* Load the first 4*VEC and last VEC to support overlapping addresses.*/
+ "vmovdqu (%%rsi), %%ymm4\n\t"
+ "vmovdqu 32(%%rsi), %%ymm5\n\t"
+ "vmovdqu (32 * 2)(%%rsi), %%ymm6\n\t"
+ "vmovdqu (32 * 3)(%%rsi), %%ymm7\n\t"
+ "vmovdqu -32(%%rsi,%%rdx), %%ymm8\n\t"
+ /* Save stop of the destination buffer. */
+ "leaq -32(%%rdi, %%rdx), %%r11\n\t"
+ /* Align destination end for aligned stores in the loop. Compute */
+ /* how much destination end is misaligned. */
+ "leaq -32(%%rsi, %%rdx), %%rcx\n\t"
+ "movq %%r11, %%r9\n\t"
+ "movq %%r11, %%r8\n\t"
+ "andq $(32 - 1), %%r8\n\t"
+ /* Adjust source. */
+ "subq %%r8, %%rcx\n\t"
+ /* Adjust the end of destination which should be aligned now. */
+ "subq %%r8, %%r9\n\t"
+ /* Adjust length. */
+ "subq %%r8, %%rdx\n\t"
+ /* Check non-temporal store threshold. */
+ "cmpq $(1024*1024), %%rdx\n\t"
+ "ja 117f\n\t"
+ "114:\n\t"
+ /* Copy 4 * VEC a time backward. */
+ "vmovdqu (%%rcx), %%ymm0\n\t"
+ "vmovdqu -32(%%rcx), %%ymm1\n\t"
+ "vmovdqu -(32 * 2)(%%rcx), %%ymm2\n\t"
+ "vmovdqu -(32 * 3)(%%rcx), %%ymm3\n\t"
+ "subq $(32 * 4), %%rcx\n\t"
+ "subq $(32 * 4), %%rdx\n\t"
+ "vmovdqa %%ymm0, (%%r9)\n\t"
+ "vmovdqa %%ymm1, -32(%%r9)\n\t"
+ "vmovdqa %%ymm2, -(32 * 2)(%%r9)\n\t"
+ "vmovdqa %%ymm3, -(32 * 3)(%%r9)\n\t"
+ "subq $(32 * 4), %%r9\n\t"
+ "cmpq $(32 * 4), %%rdx\n\t"
+ "ja 114b\n\t"
+ /* Store the first 4 * VEC. */
+ "vmovdqu %%ymm4, (%%rdi)\n\t"
+ "vmovdqu %%ymm5, 32(%%rdi)\n\t"
+ "vmovdqu %%ymm6, (32 * 2)(%%rdi)\n\t"
+ "vmovdqu %%ymm7, (32 * 3)(%%rdi)\n\t"
+ /* Store the last VEC. */
+ "vmovdqu %%ymm8, (%%r11)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+
+ "115:\n\t"
+ /* Don't use non-temporal store if there is overlap between */
+ /* destination and source since destination may be in cache */
+ /* when source is loaded. */
+ "leaq (%%rdi, %%rdx), %%r10\n\t"
+ "cmpq %%r10, %%rsi\n\t"
+ "jb 112b\n\t"
+ "116:\n\t"
+ /* Copy 4 * VEC a time forward with non-temporal stores. */
+ "prefetcht0 (32*4*2)(%%rsi)\n\t"
+ "prefetcht0 (32*4*2 + 64)(%%rsi)\n\t"
+ "prefetcht0 (32*4*3)(%%rsi)\n\t"
+ "prefetcht0 (32*4*3 + 64)(%%rsi)\n\t"
+ "vmovdqu (%%rsi), %%ymm0\n\t"
+ "vmovdqu 32(%%rsi), %%ymm1\n\t"
+ "vmovdqu (32 * 2)(%%rsi), %%ymm2\n\t"
+ "vmovdqu (32 * 3)(%%rsi), %%ymm3\n\t"
+ "addq $(32*4), %%rsi\n\t"
+ "subq $(32*4), %%rdx\n\t"
+ "vmovntdq %%ymm0, (%%rdi)\n\t"
+ "vmovntdq %%ymm1, 32(%%rdi)\n\t"
+ "vmovntdq %%ymm2, (32 * 2)(%%rdi)\n\t"
+ "vmovntdq %%ymm3, (32 * 3)(%%rdi)\n\t"
+ "addq $(32*4), %%rdi\n\t"
+ "cmpq $(32*4), %%rdx\n\t"
+ "ja 116b\n\t"
+ "sfence\n\t"
+ /* Store the last 4 * VEC. */
+ "vmovdqu %%ymm5, (%%rcx)\n\t"
+ "vmovdqu %%ymm6, -32(%%rcx)\n\t"
+ "vmovdqu %%ymm7, -(32 * 2)(%%rcx)\n\t"
+ "vmovdqu %%ymm8, -(32 * 3)(%%rcx)\n\t"
+ /* Store the first VEC. */
+ "vmovdqu %%ymm4, (%%r11)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]\n\t"
+ "117:\n\t"
+ /* Don't use non-temporal store if there is overlap between */
+ /* destination and source since destination may be in cache */
+ /* when source is loaded. */
+ "leaq (%%rcx, %%rdx), %%r10\n\t"
+ "cmpq %%r10, %%r9\n\t"
+ "jb 114b\n\t"
+ "118:\n\t"
+ /* Copy 4 * VEC a time backward with non-temporal stores. */
+ "prefetcht0 (-32 * 4 * 2)(%%rcx)\n\t"
+ "prefetcht0 (-32 * 4 * 2 - 64)(%%rcx)\n\t"
+ "prefetcht0 (-32 * 4 * 3)(%%rcx)\n\t"
+ "prefetcht0 (-32 * 4 * 3 - 64)(%%rcx)\n\t"
+ "vmovdqu (%%rcx), %%ymm0\n\t"
+ "vmovdqu -32(%%rcx), %%ymm1\n\t"
+ "vmovdqu -(32 * 2)(%%rcx), %%ymm2\n\t"
+ "vmovdqu -(32 * 3)(%%rcx), %%ymm3\n\t"
+ "subq $(32*4), %%rcx\n\t"
+ "subq $(32*4), %%rdx\n\t"
+ "vmovntdq %%ymm0, (%%r9)\n\t"
+ "vmovntdq %%ymm1, -32(%%r9)\n\t"
+ "vmovntdq %%ymm2, -(32 * 2)(%%r9)\n\t"
+ "vmovntdq %%ymm3, -(32 * 3)(%%r9)\n\t"
+ "subq $(32 * 4), %%r9\n\t"
+ "cmpq $(32 * 4), %%rdx\n\t"
+ "ja 118b\n\t"
+ "sfence\n\t"
+ /* Store the first 4 * VEC. */
+ "vmovdqu %%ymm4, (%%rdi)\n\t"
+ "vmovdqu %%ymm5, 32(%%rdi)\n\t"
+ "vmovdqu %%ymm6, (32 * 2)(%%rdi)\n\t"
+ "vmovdqu %%ymm7, (32 * 3)(%%rdi)\n\t"
+ /* Store the last VEC. */
+ "vmovdqu %%ymm8, (%%r11)\n\t"
+ "vzeroupper\n\t"
+ "jmp %l[done]"
+ :
+ : "r"(src), "r"(dst), "r"(len)
+ : "rax", "rcx", "rdx", "rdi", "rsi", "r8", "r9", "r10", "r11", "r12", "ymm0",
+ "ymm1", "ymm2", "ymm3", "ymm4", "ymm5", "ymm6", "ymm7", "ymm8", "memory"
+ : done
+ );
+done:
+ return dst;
+}
+
+#else
static __rte_always_inline void *
rte_memcpy_generic(void *dst, const void *src, size_t n)
{
@@ -479,6 +971,8 @@ rte_memcpy_generic(void *dst, const void *src, size_t n)
goto COPY_BLOCK_128_BACK31;
}
+#endif /* RTE_MEMCPY_AMDEPYC */
+
#else /* __AVX512F__ */
#define ALIGNMENT_MASK 0x0F
@@ -874,6 +1368,14 @@ rte_memcpy(void *dst, const void *src, size_t n)
return rte_memcpy_generic(dst, src, n);
}
+#if defined __AVX2__ && defined(RTE_MEMCPY_AMDEPYC)
+static __rte_always_inline void *
+rte_memcpy_aligned_tstore16(void *dst, void *src, int len)
+{
+ return rte_memcpy_aligned_ntload_tstore16_amdepyc2(dst, src, len);
+}
+#endif
+
#if defined(RTE_TOOLCHAIN_GCC) && (GCC_VERSION >= 100000)
#pragma GCC diagnostic pop
#endif
--
2.25.1
next prev parent reply other threads:[~2021-10-19 10:47 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-23 8:44 [dpdk-dev] [PATCH " Aman Kumar
2021-08-23 8:44 ` [dpdk-dev] [PATCH 2/2] net/mlx5: optimize mprq memcpy for AMD EPYC2 platforms Aman Kumar
2021-10-13 16:53 ` Thomas Monjalon
2021-10-19 10:52 ` Aman Kumar
2021-08-23 15:21 ` [dpdk-dev] [PATCH 1/2] lib/eal: add amd epyc2 memcpy routine to eal Jerin Jacob
2021-08-30 9:39 ` Aman Kumar
2021-10-19 10:47 ` Aman Kumar [this message]
2021-10-19 10:47 ` [dpdk-dev] [PATCH v2 2/2] net/mlx5: optimize mprq memcpy for AMD EPYC2 plaform Aman Kumar
2021-10-19 12:31 ` [dpdk-dev] [PATCH v2 1/2] lib/eal: add amd epyc2 memcpy routine to eal Thomas Monjalon
2021-10-19 15:35 ` Stephen Hemminger
2021-10-21 17:10 ` Song, Keesang
2021-10-21 17:40 ` Ananyev, Konstantin
2021-10-21 18:12 ` Song, Keesang
2021-10-21 18:41 ` Thomas Monjalon
2021-10-21 19:03 ` Song, Keesang
2021-10-21 19:50 ` Thomas Monjalon
2021-10-21 20:14 ` Thomas Monjalon
2021-10-22 8:45 ` Bruce Richardson
2021-10-26 15:56 ` [dpdk-dev] [PATCH v3 1/3] config/x86: add support for AMD platform Aman Kumar
2021-10-26 15:56 ` [dpdk-dev] [PATCH v3 2/3] doc/guides: add dpdk build instruction for AMD platforms Aman Kumar
2021-10-26 16:07 ` Thomas Monjalon
2021-10-27 6:30 ` Aman Kumar
2021-10-26 15:56 ` [dpdk-dev] [PATCH v3 3/3] lib/eal: add temporal store memcpy support on AMD platform Aman Kumar
2021-10-26 16:14 ` Thomas Monjalon
2021-10-27 6:34 ` Aman Kumar
2021-10-27 7:59 ` Thomas Monjalon
2021-10-26 21:10 ` Stephen Hemminger
2021-10-27 6:43 ` Aman Kumar
2021-10-26 16:01 ` [dpdk-dev] [PATCH v3 1/3] config/x86: add support for " Thomas Monjalon
2021-10-27 6:26 ` Aman Kumar
2021-10-27 7:28 ` [dpdk-dev] [PATCH v4 1/2] " Aman Kumar
2021-10-27 7:28 ` [dpdk-dev] [PATCH v4 2/2] lib/eal: add temporal store memcpy " Aman Kumar
2021-10-27 8:13 ` Thomas Monjalon
2021-10-27 11:03 ` Van Haaren, Harry
2021-10-27 11:41 ` Mattias Rönnblom
2021-10-27 12:15 ` Van Haaren, Harry
2021-10-27 12:22 ` Ananyev, Konstantin
2021-10-27 13:34 ` Aman Kumar
2021-10-27 14:10 ` Van Haaren, Harry
2021-10-27 14:31 ` Thomas Monjalon
2021-10-29 16:01 ` Song, Keesang
2021-10-27 14:26 ` Ananyev, Konstantin
2021-10-27 11:33 ` Mattias Rönnblom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211019104724.19416-1-aman.kumar@vvdntech.in \
--to=aman.kumar@vvdntech.in \
--cc=akozyrev@nvidia.com \
--cc=anatoly.burakov@intel.com \
--cc=asafp@nvidia.com \
--cc=dev@dpdk.org \
--cc=jerinjacobk@gmail.com \
--cc=keesang.song@amd.com \
--cc=matan@nvidia.com \
--cc=rasland@nvidia.com \
--cc=shys@nvidia.com \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).