From: Kevin Laatz <kevin.laatz@intel.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, bruce.richardson@intel.com,
fengchengwen@huawei.com, jerinj@marvell.com,
conor.walsh@intel.com, Kevin Laatz <kevin.laatz@intel.com>
Subject: [dpdk-dev] [PATCH v11 05/16] dma/idxd: create dmadev instances on pci probe
Date: Wed, 20 Oct 2021 16:30:02 +0000 [thread overview]
Message-ID: <20211020163013.2125016-6-kevin.laatz@intel.com> (raw)
In-Reply-To: <20211020163013.2125016-1-kevin.laatz@intel.com>
When a suitable device is found during the PCI probe, create a dmadev
instance for each HW queue. HW definitions required are also included.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
v11: fix destroy
---
drivers/dma/idxd/idxd_hw_defs.h | 63 +++++++
drivers/dma/idxd/idxd_internal.h | 13 ++
drivers/dma/idxd/idxd_pci.c | 271 ++++++++++++++++++++++++++++++-
3 files changed, 344 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/idxd/idxd_hw_defs.h b/drivers/dma/idxd/idxd_hw_defs.h
index a92d462d01..86f7f3526b 100644
--- a/drivers/dma/idxd/idxd_hw_defs.h
+++ b/drivers/dma/idxd/idxd_hw_defs.h
@@ -24,4 +24,67 @@ struct idxd_completion {
uint32_t invalid_flags;
} __rte_aligned(32);
+/*** Definitions for Intel(R) Data Streaming Accelerator ***/
+
+#define IDXD_CMD_SHIFT 20
+enum rte_idxd_cmds {
+ idxd_enable_dev = 1,
+ idxd_disable_dev,
+ idxd_drain_all,
+ idxd_abort_all,
+ idxd_reset_device,
+ idxd_enable_wq,
+ idxd_disable_wq,
+ idxd_drain_wq,
+ idxd_abort_wq,
+ idxd_reset_wq,
+};
+
+/* General bar0 registers */
+struct rte_idxd_bar0 {
+ uint32_t __rte_cache_aligned version; /* offset 0x00 */
+ uint64_t __rte_aligned(0x10) gencap; /* offset 0x10 */
+ uint64_t __rte_aligned(0x10) wqcap; /* offset 0x20 */
+ uint64_t __rte_aligned(0x10) grpcap; /* offset 0x30 */
+ uint64_t __rte_aligned(0x08) engcap; /* offset 0x38 */
+ uint64_t __rte_aligned(0x10) opcap; /* offset 0x40 */
+ uint64_t __rte_aligned(0x20) offsets[2]; /* offset 0x60 */
+ uint32_t __rte_aligned(0x20) gencfg; /* offset 0x80 */
+ uint32_t __rte_aligned(0x08) genctrl; /* offset 0x88 */
+ uint32_t __rte_aligned(0x10) gensts; /* offset 0x90 */
+ uint32_t __rte_aligned(0x08) intcause; /* offset 0x98 */
+ uint32_t __rte_aligned(0x10) cmd; /* offset 0xA0 */
+ uint32_t __rte_aligned(0x08) cmdstatus; /* offset 0xA8 */
+ uint64_t __rte_aligned(0x20) swerror[4]; /* offset 0xC0 */
+};
+
+/* workqueue config is provided by array of uint32_t. */
+enum rte_idxd_wqcfg {
+ wq_size_idx, /* size is in first 32-bit value */
+ wq_threshold_idx, /* WQ threshold second 32-bits */
+ wq_mode_idx, /* WQ mode and other flags */
+ wq_sizes_idx, /* WQ transfer and batch sizes */
+ wq_occ_int_idx, /* WQ occupancy interrupt handle */
+ wq_occ_limit_idx, /* WQ occupancy limit */
+ wq_state_idx, /* WQ state and occupancy state */
+};
+
+#define WQ_MODE_SHARED 0
+#define WQ_MODE_DEDICATED 1
+#define WQ_PRIORITY_SHIFT 4
+#define WQ_BATCH_SZ_SHIFT 5
+#define WQ_STATE_SHIFT 30
+#define WQ_STATE_MASK 0x3
+
+struct rte_idxd_grpcfg {
+ uint64_t grpwqcfg[4] __rte_cache_aligned; /* 64-byte register set */
+ uint64_t grpengcfg; /* offset 32 */
+ uint32_t grpflags; /* offset 40 */
+};
+
+#define GENSTS_DEV_STATE_MASK 0x03
+#define CMDSTATUS_ACTIVE_SHIFT 31
+#define CMDSTATUS_ACTIVE_MASK (1 << 31)
+#define CMDSTATUS_ERR_MASK 0xFF
+
#endif
diff --git a/drivers/dma/idxd/idxd_internal.h b/drivers/dma/idxd/idxd_internal.h
index 8f1cdf6102..8473bf939f 100644
--- a/drivers/dma/idxd/idxd_internal.h
+++ b/drivers/dma/idxd/idxd_internal.h
@@ -6,6 +6,7 @@
#define _IDXD_INTERNAL_H_
#include <rte_dmadev_pmd.h>
+#include <rte_spinlock.h>
#include "idxd_hw_defs.h"
@@ -28,6 +29,16 @@ extern int idxd_pmd_logtype;
#define IDXD_PMD_ERR(fmt, args...) IDXD_PMD_LOG(ERR, fmt, ## args)
#define IDXD_PMD_WARN(fmt, args...) IDXD_PMD_LOG(WARNING, fmt, ## args)
+struct idxd_pci_common {
+ rte_spinlock_t lk;
+
+ uint8_t wq_cfg_sz;
+ volatile struct rte_idxd_bar0 *regs;
+ volatile uint32_t *wq_regs_base;
+ volatile struct rte_idxd_grpcfg *grp_regs;
+ volatile void *portals;
+};
+
struct idxd_dmadev {
/* counters to track the batches */
unsigned short max_batches;
@@ -59,6 +70,8 @@ struct idxd_dmadev {
struct {
unsigned int dsa_id;
} bus;
+
+ struct idxd_pci_common *pci;
} u;
};
diff --git a/drivers/dma/idxd/idxd_pci.c b/drivers/dma/idxd/idxd_pci.c
index 79e4aadcab..6d26574917 100644
--- a/drivers/dma/idxd/idxd_pci.c
+++ b/drivers/dma/idxd/idxd_pci.c
@@ -3,6 +3,9 @@
*/
#include <rte_bus_pci.h>
+#include <rte_devargs.h>
+#include <rte_dmadev_pmd.h>
+#include <rte_malloc.h>
#include "idxd_internal.h"
@@ -16,28 +19,290 @@ const struct rte_pci_id pci_id_idxd_map[] = {
{ .vendor_id = 0, /* sentinel */ },
};
+static inline int
+idxd_pci_dev_command(struct idxd_dmadev *idxd, enum rte_idxd_cmds command)
+{
+ uint8_t err_code;
+ uint16_t qid = idxd->qid;
+ int i = 0;
+
+ if (command >= idxd_disable_wq && command <= idxd_reset_wq)
+ qid = (1 << qid);
+ rte_spinlock_lock(&idxd->u.pci->lk);
+ idxd->u.pci->regs->cmd = (command << IDXD_CMD_SHIFT) | qid;
+
+ do {
+ rte_pause();
+ err_code = idxd->u.pci->regs->cmdstatus;
+ if (++i >= 1000) {
+ IDXD_PMD_ERR("Timeout waiting for command response from HW");
+ rte_spinlock_unlock(&idxd->u.pci->lk);
+ return err_code;
+ }
+ } while (err_code & CMDSTATUS_ACTIVE_MASK);
+ rte_spinlock_unlock(&idxd->u.pci->lk);
+
+ err_code &= CMDSTATUS_ERR_MASK;
+ return -err_code;
+}
+
+static uint32_t *
+idxd_get_wq_cfg(struct idxd_pci_common *pci, uint8_t wq_idx)
+{
+ return RTE_PTR_ADD(pci->wq_regs_base,
+ (uintptr_t)wq_idx << (5 + pci->wq_cfg_sz));
+}
+
+static int
+idxd_is_wq_enabled(struct idxd_dmadev *idxd)
+{
+ uint32_t state = idxd_get_wq_cfg(idxd->u.pci, idxd->qid)[wq_state_idx];
+ return ((state >> WQ_STATE_SHIFT) & WQ_STATE_MASK) == 0x1;
+}
+
+static int
+idxd_pci_dev_close(struct rte_dma_dev *dev)
+{
+ struct idxd_dmadev *idxd = dev->fp_obj->dev_private;
+ uint8_t err_code;
+
+ /* disable the device */
+ err_code = idxd_pci_dev_command(idxd, idxd_disable_dev);
+ if (err_code) {
+ IDXD_PMD_ERR("Error disabling device: code %#x", err_code);
+ return err_code;
+ }
+ IDXD_PMD_DEBUG("IDXD Device disabled OK");
+
+ /* free device memory */
+ IDXD_PMD_DEBUG("Freeing device driver memory");
+ rte_free(idxd->batch_idx_ring);
+
+ return 0;
+}
+
+static const struct rte_dma_dev_ops idxd_pci_ops = {
+ .dev_close = idxd_pci_dev_close,
+};
+
+/* each portal uses 4 x 4k pages */
+#define IDXD_PORTAL_SIZE (4096 * 4)
+
+static int
+init_pci_device(struct rte_pci_device *dev, struct idxd_dmadev *idxd,
+ unsigned int max_queues)
+{
+ struct idxd_pci_common *pci;
+ uint8_t nb_groups, nb_engines, nb_wqs;
+ uint16_t grp_offset, wq_offset; /* how far into bar0 the regs are */
+ uint16_t wq_size, total_wq_size;
+ uint8_t lg2_max_batch, lg2_max_copy_size;
+ unsigned int i, err_code;
+
+ pci = malloc(sizeof(*pci));
+ if (pci == NULL) {
+ IDXD_PMD_ERR("%s: Can't allocate memory", __func__);
+ err_code = -1;
+ goto err;
+ }
+ rte_spinlock_init(&pci->lk);
+
+ /* assign the bar registers, and then configure device */
+ pci->regs = dev->mem_resource[0].addr;
+ grp_offset = (uint16_t)pci->regs->offsets[0];
+ pci->grp_regs = RTE_PTR_ADD(pci->regs, grp_offset * 0x100);
+ wq_offset = (uint16_t)(pci->regs->offsets[0] >> 16);
+ pci->wq_regs_base = RTE_PTR_ADD(pci->regs, wq_offset * 0x100);
+ pci->portals = dev->mem_resource[2].addr;
+ pci->wq_cfg_sz = (pci->regs->wqcap >> 24) & 0x0F;
+
+ /* sanity check device status */
+ if (pci->regs->gensts & GENSTS_DEV_STATE_MASK) {
+ /* need function-level-reset (FLR) or is enabled */
+ IDXD_PMD_ERR("Device status is not disabled, cannot init");
+ err_code = -1;
+ goto err;
+ }
+ if (pci->regs->cmdstatus & CMDSTATUS_ACTIVE_MASK) {
+ /* command in progress */
+ IDXD_PMD_ERR("Device has a command in progress, cannot init");
+ err_code = -1;
+ goto err;
+ }
+
+ /* read basic info about the hardware for use when configuring */
+ nb_groups = (uint8_t)pci->regs->grpcap;
+ nb_engines = (uint8_t)pci->regs->engcap;
+ nb_wqs = (uint8_t)(pci->regs->wqcap >> 16);
+ total_wq_size = (uint16_t)pci->regs->wqcap;
+ lg2_max_copy_size = (uint8_t)(pci->regs->gencap >> 16) & 0x1F;
+ lg2_max_batch = (uint8_t)(pci->regs->gencap >> 21) & 0x0F;
+
+ IDXD_PMD_DEBUG("nb_groups = %u, nb_engines = %u, nb_wqs = %u",
+ nb_groups, nb_engines, nb_wqs);
+
+ /* zero out any old config */
+ for (i = 0; i < nb_groups; i++) {
+ pci->grp_regs[i].grpengcfg = 0;
+ pci->grp_regs[i].grpwqcfg[0] = 0;
+ }
+ for (i = 0; i < nb_wqs; i++)
+ idxd_get_wq_cfg(pci, i)[0] = 0;
+
+ /* limit queues if necessary */
+ if (max_queues != 0 && nb_wqs > max_queues) {
+ nb_wqs = max_queues;
+ if (nb_engines > max_queues)
+ nb_engines = max_queues;
+ if (nb_groups > max_queues)
+ nb_engines = max_queues;
+ IDXD_PMD_DEBUG("Limiting queues to %u", nb_wqs);
+ }
+
+ /* put each engine into a separate group to avoid reordering */
+ if (nb_groups > nb_engines)
+ nb_groups = nb_engines;
+ if (nb_groups < nb_engines)
+ nb_engines = nb_groups;
+
+ /* assign engines to groups, round-robin style */
+ for (i = 0; i < nb_engines; i++) {
+ IDXD_PMD_DEBUG("Assigning engine %u to group %u",
+ i, i % nb_groups);
+ pci->grp_regs[i % nb_groups].grpengcfg |= (1ULL << i);
+ }
+
+ /* now do the same for queues and give work slots to each queue */
+ wq_size = total_wq_size / nb_wqs;
+ IDXD_PMD_DEBUG("Work queue size = %u, max batch = 2^%u, max copy = 2^%u",
+ wq_size, lg2_max_batch, lg2_max_copy_size);
+ for (i = 0; i < nb_wqs; i++) {
+ /* add engine "i" to a group */
+ IDXD_PMD_DEBUG("Assigning work queue %u to group %u",
+ i, i % nb_groups);
+ pci->grp_regs[i % nb_groups].grpwqcfg[0] |= (1ULL << i);
+ /* now configure it, in terms of size, max batch, mode */
+ idxd_get_wq_cfg(pci, i)[wq_size_idx] = wq_size;
+ idxd_get_wq_cfg(pci, i)[wq_mode_idx] = (1 << WQ_PRIORITY_SHIFT) |
+ WQ_MODE_DEDICATED;
+ idxd_get_wq_cfg(pci, i)[wq_sizes_idx] = lg2_max_copy_size |
+ (lg2_max_batch << WQ_BATCH_SZ_SHIFT);
+ }
+
+ /* dump the group configuration to output */
+ for (i = 0; i < nb_groups; i++) {
+ IDXD_PMD_DEBUG("## Group %d", i);
+ IDXD_PMD_DEBUG(" GRPWQCFG: %"PRIx64, pci->grp_regs[i].grpwqcfg[0]);
+ IDXD_PMD_DEBUG(" GRPENGCFG: %"PRIx64, pci->grp_regs[i].grpengcfg);
+ IDXD_PMD_DEBUG(" GRPFLAGS: %"PRIx32, pci->grp_regs[i].grpflags);
+ }
+
+ idxd->u.pci = pci;
+ idxd->max_batches = wq_size;
+
+ /* enable the device itself */
+ err_code = idxd_pci_dev_command(idxd, idxd_enable_dev);
+ if (err_code) {
+ IDXD_PMD_ERR("Error enabling device: code %#x", err_code);
+ goto err;
+ }
+ IDXD_PMD_DEBUG("IDXD Device enabled OK");
+
+ return nb_wqs;
+
+err:
+ free(pci);
+ return err_code;
+}
+
static int
idxd_dmadev_probe_pci(struct rte_pci_driver *drv, struct rte_pci_device *dev)
{
- int ret = 0;
+ struct idxd_dmadev idxd = {0};
+ uint8_t nb_wqs;
+ int qid, ret = 0;
char name[PCI_PRI_STR_SIZE];
+ unsigned int max_queues = 0;
rte_pci_device_name(&dev->addr, name, sizeof(name));
IDXD_PMD_INFO("Init %s on NUMA node %d", name, dev->device.numa_node);
dev->device.driver = &drv->driver;
+ if (dev->device.devargs && dev->device.devargs->args[0] != '\0') {
+ /* if the number of devargs grows beyond just 1, use rte_kvargs */
+ if (sscanf(dev->device.devargs->args,
+ "max_queues=%u", &max_queues) != 1) {
+ IDXD_PMD_ERR("Invalid device parameter: '%s'",
+ dev->device.devargs->args);
+ return -1;
+ }
+ }
+
+ ret = init_pci_device(dev, &idxd, max_queues);
+ if (ret < 0) {
+ IDXD_PMD_ERR("Error initializing PCI hardware");
+ return ret;
+ }
+ if (idxd.u.pci->portals == NULL) {
+ IDXD_PMD_ERR("Error, invalid portal assigned during initialization\n");
+ free(idxd.u.pci);
+ return -EINVAL;
+ }
+ nb_wqs = (uint8_t)ret;
+
+ /* set up one device for each queue */
+ for (qid = 0; qid < nb_wqs; qid++) {
+ char qname[32];
+
+ /* add the queue number to each device name */
+ snprintf(qname, sizeof(qname), "%s-q%d", name, qid);
+ idxd.qid = qid;
+ idxd.portal = RTE_PTR_ADD(idxd.u.pci->portals,
+ qid * IDXD_PORTAL_SIZE);
+ if (idxd_is_wq_enabled(&idxd))
+ IDXD_PMD_ERR("Error, WQ %u seems enabled", qid);
+ ret = idxd_dmadev_create(qname, &dev->device,
+ &idxd, &idxd_pci_ops);
+ if (ret != 0) {
+ IDXD_PMD_ERR("Failed to create dmadev %s", name);
+ if (qid == 0) /* if no devices using this, free pci */
+ free(idxd.u.pci);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int
+idxd_dmadev_destroy(const char *name)
+{
+ int ret = 0;
+
+ /* rte_dma_close is called by pmd_release */
+ ret = rte_dma_pmd_release(name);
+ if (ret)
+ IDXD_PMD_DEBUG("Device cleanup failed");
+
return ret;
}
static int
idxd_dmadev_remove_pci(struct rte_pci_device *dev)
{
+ int i = 0;
char name[PCI_PRI_STR_SIZE];
rte_pci_device_name(&dev->addr, name, sizeof(name));
- IDXD_PMD_INFO("Closing %s on NUMA node %d",
- name, dev->device.numa_node);
+ IDXD_PMD_INFO("Closing %s on NUMA node %d", name, dev->device.numa_node);
+
+ RTE_DMA_FOREACH_DEV(i) {
+ struct rte_dma_info *info = {0};
+ rte_dma_info_get(i, info);
+ if (strncmp(name, info->dev_name, strlen(name)) == 0)
+ idxd_dmadev_destroy(info->dev_name);
+ }
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2021-10-20 16:30 UTC|newest]
Thread overview: 243+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-27 17:20 [dpdk-dev] [PATCH 00/13] add dmadev driver for idxd devices Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 01/13] raw/ioat: only build if dmadev not present Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 02/13] doc: initial commit for dmadevs section Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 03/13] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 04/13] dma/idxd: add bus device probing Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 05/13] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 06/13] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 07/13] dma/idxd: add datapath structures Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 08/13] dma/idxd: add configure and info_get functions Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 09/13] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 10/13] dma/idxd: add data-path job submission functions Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 11/13] dma/idxd: add data-path job completion functions Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 12/13] dma/idxd: add operation statistic tracking Kevin Laatz
2021-08-27 17:20 ` [dpdk-dev] [PATCH 13/13] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 02/16] doc: initial commit for dmadevs section Kevin Laatz
2021-09-03 10:51 ` Bruce Richardson
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 03/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 04/16] dma/idxd: add bus device probing Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 05/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 06/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 07/16] dma/idxd: add datapath structures Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 08/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 09/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 10/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 11/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 12/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 13/16] dma/idxd: add vchan idle function Kevin Laatz
2021-09-03 10:49 ` [dpdk-dev] [PATCH v2 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-03 10:50 ` [dpdk-dev] [PATCH v2 15/16] devbind: add dma device class Kevin Laatz
2021-09-03 10:50 ` [dpdk-dev] [PATCH v2 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-09-08 10:29 ` [dpdk-dev] [PATCH v3 00/17] add dmadev driver for idxd devices Kevin Laatz
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 01/17] raw/ioat: only build if dmadev not present Kevin Laatz
2021-09-08 16:00 ` Conor Walsh
2021-09-09 11:11 ` Kevin Laatz
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 02/17] doc: initial commit for dmadevs section Kevin Laatz
2021-09-08 16:00 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 03/17] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-09-08 16:47 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 04/17] dma/idxd: add bus device probing Kevin Laatz
2021-09-08 16:47 ` Conor Walsh
2021-09-09 11:10 ` Kevin Laatz
2021-09-15 10:12 ` Maxime Coquelin
2021-09-15 11:06 ` Bruce Richardson
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 05/17] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-09-08 16:47 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 06/17] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-09-08 16:48 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 07/17] dma/idxd: add datapath structures Kevin Laatz
2021-09-09 11:23 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 08/17] dma/idxd: add configure and info_get functions Kevin Laatz
2021-09-09 11:23 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 09/17] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-09-09 11:24 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 10/17] dma/idxd: add data-path job submission functions Kevin Laatz
2021-09-09 11:24 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 11/17] dma/idxd: add data-path job completion functions Kevin Laatz
2021-09-09 11:24 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 12/17] dma/idxd: add operation statistic tracking Kevin Laatz
2021-09-09 11:25 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 13/17] dma/idxd: add vchan status function Kevin Laatz
2021-09-09 11:26 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 14/17] dma/idxd: add burst capacity API Kevin Laatz
2021-09-09 11:26 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 15/17] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 16/17] devbind: add dma device class Kevin Laatz
2021-09-09 11:26 ` Conor Walsh
2021-09-08 10:30 ` [dpdk-dev] [PATCH v3 17/17] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-09-09 11:27 ` Conor Walsh
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 15/16] devbind: add dma device class Kevin Laatz
2021-09-17 14:02 ` [dpdk-dev] [PATCH v4 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-09-20 10:15 ` Bruce Richardson
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-09-20 10:23 ` Bruce Richardson
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-09-22 2:04 ` fengchengwen
2021-09-22 9:12 ` Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-09-22 2:12 ` fengchengwen
2021-09-22 9:18 ` Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-09-20 10:27 ` Bruce Richardson
2021-09-22 2:31 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-09-22 2:40 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-09-20 10:30 ` Bruce Richardson
2021-09-22 3:22 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-09-20 10:36 ` Bruce Richardson
2021-09-22 3:47 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-09-22 3:51 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-09-20 10:39 ` Bruce Richardson
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-20 10:43 ` Bruce Richardson
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 15/16] devbind: add dma device class Kevin Laatz
2021-09-20 10:45 ` Bruce Richardson
2021-09-22 2:19 ` fengchengwen
2021-09-17 15:24 ` [dpdk-dev] [PATCH v5 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-09-20 10:46 ` Bruce Richardson
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 15/16] devbind: add dma device class Kevin Laatz
2021-09-24 13:39 ` [dpdk-dev] [PATCH v6 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-10-18 10:32 ` Thomas Monjalon
2021-10-18 10:41 ` Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 15/16] devbind: add dma device class Kevin Laatz
2021-10-13 16:30 ` [dpdk-dev] [PATCH v7 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-10-19 7:04 ` Thomas Monjalon
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 15/16] devbind: add dma device class Kevin Laatz
2021-10-18 12:28 ` [dpdk-dev] [PATCH v8 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 15/16] devbind: add dma device class Kevin Laatz
2021-10-19 11:25 ` [dpdk-dev] [PATCH v9 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-10-20 6:54 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-10-20 7:10 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 05/16] dma/idxd: create dmadev instances on pci probe Kevin Laatz
2021-10-20 7:34 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-10-20 7:44 ` fengchengwen
2021-10-20 8:20 ` Bruce Richardson
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-10-20 7:54 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-10-20 8:04 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-10-20 8:27 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-10-20 9:18 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-10-20 9:30 ` fengchengwen
2021-10-20 9:52 ` Bruce Richardson
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-10-20 9:32 ` fengchengwen
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 15/16] devbind: add dma device class Kevin Laatz
2021-10-19 14:10 ` [dpdk-dev] [PATCH v10 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-20 16:29 ` [dpdk-dev] [PATCH v11 00/16] add dmadev driver for idxd devices Kevin Laatz
2021-10-20 16:29 ` [dpdk-dev] [PATCH v11 01/16] raw/ioat: only build if dmadev not present Kevin Laatz
2021-10-20 16:29 ` [dpdk-dev] [PATCH v11 02/16] dma/idxd: add skeleton for VFIO based DSA device Kevin Laatz
2021-10-22 15:47 ` Thomas Monjalon
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 03/16] dma/idxd: add bus device probing Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 04/16] dma/idxd: create dmadev instances on bus probe Kevin Laatz
2021-10-20 16:30 ` Kevin Laatz [this message]
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 06/16] dma/idxd: add datapath structures Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 07/16] dma/idxd: add configure and info_get functions Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 08/16] dma/idxd: add start and stop functions for pci devices Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 09/16] dma/idxd: add data-path job submission functions Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 10/16] dma/idxd: add data-path job completion functions Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 11/16] dma/idxd: add operation statistic tracking Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 12/16] dma/idxd: add vchan status function Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 13/16] dma/idxd: add burst capacity API Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 14/16] dma/idxd: move dpdk_idxd_cfg.py from raw to dma Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 15/16] devbind: add dma device class Kevin Laatz
2021-10-20 16:30 ` [dpdk-dev] [PATCH v11 16/16] devbind: move idxd device ID to dmadev class Kevin Laatz
2021-10-22 18:07 ` [dpdk-dev] [PATCH v11 00/16] add dmadev driver for idxd devices Thomas Monjalon
2021-10-23 6:55 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211020163013.2125016-6-kevin.laatz@intel.com \
--to=kevin.laatz@intel.com \
--cc=bruce.richardson@intel.com \
--cc=conor.walsh@intel.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=jerinj@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).