From: Apeksha Gupta <apeksha.gupta@nxp.com>
To: david.marchand@redhat.com, ferruh.yigit@intel.com,
andrew.rybchenko@oktetlabs.ru
Cc: dev@dpdk.org, sachin.saxena@nxp.com, hemant.agrawal@nxp.com,
Apeksha Gupta <apeksha.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH v8 2/5] net/enetfec: add UIO support
Date: Tue, 9 Nov 2021 17:04:29 +0530 [thread overview]
Message-ID: <20211109113432.11876-3-apeksha.gupta@nxp.com> (raw)
In-Reply-To: <20211109113432.11876-1-apeksha.gupta@nxp.com>
Implemented the fec-uio driver in kernel. enetfec PMD uses
UIO interface to interact with "fec-uio" driver implemented in
kernel for PHY initialisation and for mapping the allocated memory
of register & BD from kernel to DPDK which gives access to
non-cacheable memory for BD.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
---
drivers/net/enetfec/enet_ethdev.c | 209 ++++++++++++++++++++++
drivers/net/enetfec/enet_ethdev.h | 11 ++
drivers/net/enetfec/enet_regs.h | 106 +++++++++++
drivers/net/enetfec/enet_uio.c | 284 ++++++++++++++++++++++++++++++
drivers/net/enetfec/enet_uio.h | 64 +++++++
drivers/net/enetfec/meson.build | 3 +-
6 files changed, 676 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/enetfec/enet_regs.h
create mode 100644 drivers/net/enetfec/enet_uio.c
create mode 100644 drivers/net/enetfec/enet_uio.h
diff --git a/drivers/net/enetfec/enet_ethdev.c b/drivers/net/enetfec/enet_ethdev.c
index 50390f4ea4..fe6b5e539f 100644
--- a/drivers/net/enetfec/enet_ethdev.c
+++ b/drivers/net/enetfec/enet_ethdev.c
@@ -13,14 +13,192 @@
#include <rte_bus_vdev.h>
#include <rte_dev.h>
#include <rte_ether.h>
+#include <rte_io.h>
#include "enet_pmd_logs.h"
#include "enet_ethdev.h"
+#include "enet_regs.h"
+#include "enet_uio.h"
#define ENETFEC_NAME_PMD net_enetfec
+/* FEC receive acceleration */
+#define ENETFEC_RACC_IPDIS RTE_BIT32(1)
+#define ENETFEC_RACC_PRODIS RTE_BIT32(2)
+#define ENETFEC_RACC_SHIFT16 RTE_BIT32(7)
+#define ENETFEC_RACC_OPTIONS (ENETFEC_RACC_IPDIS | \
+ ENETFEC_RACC_PRODIS)
+
+#define ENETFEC_PAUSE_FLAG_AUTONEG 0x1
+#define ENETFEC_PAUSE_FLAG_ENABLE 0x2
+
+/* Pause frame field and FIFO threshold */
+#define ENETFEC_FCE RTE_BIT32(5)
+#define ENETFEC_RSEM_V 0x84
+#define ENETFEC_RSFL_V 16
+#define ENETFEC_RAEM_V 0x8
+#define ENETFEC_RAFL_V 0x8
+#define ENETFEC_OPD_V 0xFFF0
+
+#define NUM_OF_BD_QUEUES 6
+
+/*
+ * This function is called to start or restart the ENETFEC during a link
+ * change, transmit timeout, or to reconfigure the ENETFEC. The network
+ * packet processing for this device must be stopped before this call.
+ */
+static void
+enetfec_restart(struct rte_eth_dev *dev)
+{
+ struct enetfec_private *fep = dev->data->dev_private;
+ uint32_t rcntl = OPT_FRAME_SIZE | 0x04;
+ uint32_t ecntl = ENETFEC_ETHEREN;
+ uint32_t val;
+
+ /* Clear any outstanding interrupt. */
+ writel(0xffffffff, (uint8_t *)fep->hw_baseaddr_v + ENETFEC_EIR);
+
+ /* Enable MII mode */
+ if (fep->full_duplex == FULL_DUPLEX) {
+ /* FD enable */
+ rte_write32(rte_cpu_to_le_32(0x04),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_TCR);
+ } else {
+ /* No Rcv on Xmit */
+ rcntl |= 0x02;
+ rte_write32(0, (uint8_t *)fep->hw_baseaddr_v + ENETFEC_TCR);
+ }
+
+ if (fep->quirks & QUIRK_RACC) {
+ val = rte_read32((uint8_t *)fep->hw_baseaddr_v + ENETFEC_RACC);
+ /* align IP header */
+ val |= ENETFEC_RACC_SHIFT16;
+ val &= ~ENETFEC_RACC_OPTIONS;
+ rte_write32(rte_cpu_to_le_32(val),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_RACC);
+ rte_write32(rte_cpu_to_le_32(PKT_MAX_BUF_SIZE),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_FRAME_TRL);
+ }
+
+ /*
+ * The phy interface and speed need to get configured
+ * differently on enet-mac.
+ */
+ if (fep->quirks & QUIRK_HAS_ENETFEC_MAC) {
+ /* Enable flow control and length check */
+ rcntl |= 0x40000000 | 0x00000020;
+
+ /* RGMII, RMII or MII */
+ rcntl |= RTE_BIT32(6);
+ ecntl |= RTE_BIT32(5);
+ }
+
+ /* enable pause frame*/
+ if ((fep->flag_pause & ENETFEC_PAUSE_FLAG_ENABLE) ||
+ ((fep->flag_pause & ENETFEC_PAUSE_FLAG_AUTONEG)
+ /*&& ndev->phydev && ndev->phydev->pause*/)) {
+ rcntl |= ENETFEC_FCE;
+
+ /* set FIFO threshold parameter to reduce overrun */
+ rte_write32(rte_cpu_to_le_32(ENETFEC_RSEM_V),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_R_FIFO_SEM);
+ rte_write32(rte_cpu_to_le_32(ENETFEC_RSFL_V),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_R_FIFO_SFL);
+ rte_write32(rte_cpu_to_le_32(ENETFEC_RAEM_V),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_R_FIFO_AEM);
+ rte_write32(rte_cpu_to_le_32(ENETFEC_RAFL_V),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_R_FIFO_AFL);
+
+ /* OPD */
+ rte_write32(rte_cpu_to_le_32(ENETFEC_OPD_V),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_OPD);
+ } else {
+ rcntl &= ~ENETFEC_FCE;
+ }
+
+ rte_write32(rte_cpu_to_le_32(rcntl),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_RCR);
+
+ rte_write32(0, (uint8_t *)fep->hw_baseaddr_v + ENETFEC_IAUR);
+ rte_write32(0, (uint8_t *)fep->hw_baseaddr_v + ENETFEC_IALR);
+
+ if (fep->quirks & QUIRK_HAS_ENETFEC_MAC) {
+ /* enable ENETFEC endian swap */
+ ecntl |= (1 << 8);
+ /* enable ENETFEC store and forward mode */
+ rte_write32(rte_cpu_to_le_32(1 << 8),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_TFWR);
+ }
+ if (fep->bufdesc_ex)
+ ecntl |= (1 << 4);
+ if (fep->quirks & QUIRK_SUPPORT_DELAYED_CLKS &&
+ fep->rgmii_txc_delay)
+ ecntl |= ENETFEC_TXC_DLY;
+ if (fep->quirks & QUIRK_SUPPORT_DELAYED_CLKS &&
+ fep->rgmii_rxc_delay)
+ ecntl |= ENETFEC_RXC_DLY;
+ /* Enable the MIB statistic event counters */
+ rte_write32(0, (uint8_t *)fep->hw_baseaddr_v + ENETFEC_MIBC);
+
+ ecntl |= 0x70000000;
+ fep->enetfec_e_cntl = ecntl;
+ /* And last, enable the transmit and receive processing */
+ rte_write32(rte_cpu_to_le_32(ecntl),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_ECR);
+ rte_delay_us(10);
+}
+
+static int
+enetfec_eth_configure(struct rte_eth_dev *dev)
+{
+ if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+ ENETFEC_PMD_ERR("PMD does not support KEEP_CRC offload");
+
+ return 0;
+}
+
+static int
+enetfec_eth_start(struct rte_eth_dev *dev)
+{
+ enetfec_restart(dev);
+
+ return 0;
+}
+
+/* ENETFEC disable function.
+ * @param[in] base ENETFEC base address
+ */
+static void
+enetfec_disable(struct enetfec_private *fep)
+{
+ rte_write32(rte_read32((uint8_t *)fep->hw_baseaddr_v + ENETFEC_ECR)
+ & ~(fep->enetfec_e_cntl),
+ (uint8_t *)fep->hw_baseaddr_v + ENETFEC_ECR);
+}
+
+static int
+enetfec_eth_stop(struct rte_eth_dev *dev)
+{
+ struct enetfec_private *fep = dev->data->dev_private;
+
+ dev->data->dev_started = 0;
+ enetfec_disable(fep);
+
+ return 0;
+}
+
+static const struct eth_dev_ops enetfec_ops = {
+ .dev_configure = enetfec_eth_configure,
+ .dev_start = enetfec_eth_start,
+ .dev_stop = enetfec_eth_stop
+};
+
static int
enetfec_eth_init(struct rte_eth_dev *dev)
{
+ struct enetfec_private *fep = dev->data->dev_private;
+
+ fep->full_duplex = FULL_DUPLEX;
+ dev->dev_ops = &enetfec_ops;
rte_eth_dev_probing_finish(dev);
return 0;
}
@@ -32,6 +210,8 @@ pmd_enetfec_probe(struct rte_vdev_device *vdev)
struct enetfec_private *fep;
const char *name;
int rc;
+ int i;
+ unsigned int bdsize;
name = rte_vdev_device_name(vdev);
if (name == NULL)
@@ -45,6 +225,35 @@ pmd_enetfec_probe(struct rte_vdev_device *vdev)
/* setup board info structure */
fep = dev->data->dev_private;
fep->dev = dev;
+
+ fep->max_rx_queues = ENETFEC_MAX_Q;
+ fep->max_tx_queues = ENETFEC_MAX_Q;
+ fep->quirks = QUIRK_HAS_ENETFEC_MAC | QUIRK_GBIT
+ | QUIRK_RACC;
+
+ rc = enetfec_configure();
+ if (rc != 0)
+ return -ENOMEM;
+ rc = config_enetfec_uio(fep);
+ if (rc != 0)
+ return -ENOMEM;
+
+ /* Get the BD size for distributing among six queues */
+ bdsize = (fep->bd_size) / NUM_OF_BD_QUEUES;
+
+ for (i = 0; i < fep->max_tx_queues; i++) {
+ fep->dma_baseaddr_t[i] = fep->bd_addr_v;
+ fep->bd_addr_p_t[i] = fep->bd_addr_p;
+ fep->bd_addr_v = (uint8_t *)fep->bd_addr_v + bdsize;
+ fep->bd_addr_p = fep->bd_addr_p + bdsize;
+ }
+ for (i = 0; i < fep->max_rx_queues; i++) {
+ fep->dma_baseaddr_r[i] = fep->bd_addr_v;
+ fep->bd_addr_p_r[i] = fep->bd_addr_p;
+ fep->bd_addr_v = (uint8_t *)fep->bd_addr_v + bdsize;
+ fep->bd_addr_p = fep->bd_addr_p + bdsize;
+ }
+
rc = enetfec_eth_init(dev);
if (rc)
goto failed_init;
diff --git a/drivers/net/enetfec/enet_ethdev.h b/drivers/net/enetfec/enet_ethdev.h
index e6b55e1ae6..0f0684ab11 100644
--- a/drivers/net/enetfec/enet_ethdev.h
+++ b/drivers/net/enetfec/enet_ethdev.h
@@ -5,12 +5,23 @@
#ifndef __ENETFEC_ETHDEV_H__
#define __ENETFEC_ETHDEV_H__
+#include <rte_ethdev.h>
+
+/* full duplex */
+#define FULL_DUPLEX 0x00
+
+#define PKT_MAX_BUF_SIZE 1984
+#define OPT_FRAME_SIZE (PKT_MAX_BUF_SIZE << 16)
+
/*
* ENETFEC can support 1 rx and tx queue..
*/
#define ENETFEC_MAX_Q 1
+#define writel(v, p) ({*(volatile unsigned int *)(p) = (v); })
+#define readl(p) rte_read32(p)
+
struct enetfec_private {
struct rte_eth_dev *dev;
struct rte_eth_stats stats;
diff --git a/drivers/net/enetfec/enet_regs.h b/drivers/net/enetfec/enet_regs.h
new file mode 100644
index 0000000000..5415ed77ea
--- /dev/null
+++ b/drivers/net/enetfec/enet_regs.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 NXP
+ */
+
+#ifndef __ENETFEC_REGS_H
+#define __ENETFEC_REGS_H
+
+/* Ethernet receive use control and status of buffer descriptor
+ */
+#define RX_BD_TR ((ushort)0x0001) /* Truncated */
+#define RX_BD_OV ((ushort)0x0002) /* Over-run */
+#define RX_BD_CR ((ushort)0x0004) /* CRC or Frame error */
+#define RX_BD_SH ((ushort)0x0008) /* Reserved */
+#define RX_BD_NO ((ushort)0x0010) /* Rcvd non-octet aligned frame */
+#define RX_BD_LG ((ushort)0x0020) /* Rcvd frame length voilation */
+#define RX_BD_FIRST ((ushort)0x0400) /* Reserved */
+#define RX_BD_LAST ((ushort)0x0800) /* last buffer in the frame */
+#define RX_BD_INT 0x00800000
+#define RX_BD_ICE 0x00000020
+#define RX_BD_PCR 0x00000010
+
+/*
+ * 0 The next BD in consecutive location
+ * 1 The next BD in ENETFECn_RDSR.
+ */
+#define RX_BD_WRAP ((ushort)0x2000)
+#define RX_BD_EMPTY ((ushort)0x8000) /* BD is empty */
+#define RX_BD_STATS ((ushort)0x013f) /* All buffer descriptor status bits */
+
+/* Ethernet transmit use control and status of buffer descriptor */
+#define TX_BD_TC ((ushort)0x0400) /* Transmit CRC */
+#define TX_BD_LAST ((ushort)0x0800) /* Last in frame */
+#define TX_BD_READY ((ushort)0x8000) /* Data is ready */
+#define TX_BD_STATS ((ushort)0x0fff) /* All buffer descriptor status bits */
+#define TX_BD_WRAP ((ushort)0x2000)
+
+/* Ethernet transmit use control and status of enhanced buffer descriptor */
+#define TX_BD_IINS 0x08000000
+#define TX_BD_PINS 0x10000000
+
+#define ENETFEC_RD_START(X) (((X) == 1) ? ENETFEC_RD_START_1 : \
+ (((X) == 2) ? \
+ ENETFEC_RD_START_2 : ENETFEC_RD_START_0))
+#define ENETFEC_TD_START(X) (((X) == 1) ? ENETFEC_TD_START_1 : \
+ (((X) == 2) ? \
+ ENETFEC_TD_START_2 : ENETFEC_TD_START_0))
+#define ENETFEC_MRB_SIZE(X) (((X) == 1) ? ENETFEC_MRB_SIZE_1 : \
+ (((X) == 2) ? \
+ ENETFEC_MRB_SIZE_2 : ENETFEC_MRB_SIZE_0))
+
+#define ENETFEC_ETHEREN ((uint)0x00000002)
+#define ENETFEC_TXC_DLY ((uint)0x00010000)
+#define ENETFEC_RXC_DLY ((uint)0x00020000)
+
+/* ENETFEC MAC is in controller */
+#define QUIRK_HAS_ENETFEC_MAC (1 << 0)
+/* GBIT supported in controller */
+#define QUIRK_GBIT (1 << 3)
+/* RACC register supported by controller */
+#define QUIRK_RACC (1 << 12)
+/* i.MX8 ENETFEC IP version added the feature to generate the delayed TXC or
+ * RXC. For its implementation, ENETFEC uses synchronized clocks (250MHz) for
+ * generating delay of 2ns.
+ */
+#define QUIRK_SUPPORT_DELAYED_CLKS (1 << 18)
+
+#define ENETFEC_EIR 0x004 /* Interrupt event register */
+#define ENETFEC_EIMR 0x008 /* Interrupt mask register */
+#define ENETFEC_RDAR_0 0x010 /* Receive descriptor active register ring0 */
+#define ENETFEC_TDAR_0 0x014 /* Transmit descriptor active register ring0 */
+#define ENETFEC_ECR 0x024 /* Ethernet control register */
+#define ENETFEC_MSCR 0x044 /* MII speed control register */
+#define ENETFEC_MIBC 0x064 /* MIB control and status register */
+#define ENETFEC_RCR 0x084 /* Receive control register */
+#define ENETFEC_TCR 0x0c4 /* Transmit Control register */
+#define ENETFEC_PALR 0x0e4 /* MAC address low 32 bits */
+#define ENETFEC_PAUR 0x0e8 /* MAC address high 16 bits */
+#define ENETFEC_OPD 0x0ec /* Opcode/Pause duration register */
+#define ENETFEC_IAUR 0x118 /* hash table 32 bits high */
+#define ENETFEC_IALR 0x11c /* hash table 32 bits low */
+#define ENETFEC_GAUR 0x120 /* grp hash table 32 bits high */
+#define ENETFEC_GALR 0x124 /* grp hash table 32 bits low */
+#define ENETFEC_TFWR 0x144 /* transmit FIFO water_mark */
+#define ENETFEC_RACC 0x1c4 /* Receive Accelerator function configuration*/
+#define ENETFEC_DMA1CFG 0x1d8 /* DMA class based configuration ring1 */
+#define ENETFEC_DMA2CFG 0x1dc /* DMA class based Configuration ring2 */
+#define ENETFEC_RDAR_1 0x1e0 /* Rx descriptor active register ring1 */
+#define ENETFEC_TDAR_1 0x1e4 /* Tx descriptor active register ring1 */
+#define ENETFEC_RDAR_2 0x1e8 /* Rx descriptor active register ring2 */
+#define ENETFEC_TDAR_2 0x1ec /* Tx descriptor active register ring2 */
+#define ENETFEC_RD_START_1 0x160 /* Receive descriptor ring1 start reg */
+#define ENETFEC_TD_START_1 0x164 /* Transmit descriptor ring1 start reg */
+#define ENETFEC_MRB_SIZE_1 0x168 /* Max receive buffer size reg ring1 */
+#define ENETFEC_RD_START_2 0x16c /* Receive descriptor ring2 start reg */
+#define ENETFEC_TD_START_2 0x170 /* Transmit descriptor ring2 start reg */
+#define ENETFEC_MRB_SIZE_2 0x174 /* Max receive buffer size reg ring2 */
+#define ENETFEC_RD_START_0 0x180 /* Receive descriptor ring0 start reg */
+#define ENETFEC_TD_START_0 0x184 /* Transmit descriptor ring0 start reg */
+#define ENETFEC_MRB_SIZE_0 0x188 /* Max receive buffer size reg ring0*/
+#define ENETFEC_R_FIFO_SFL 0x190 /* Rx FIFO full threshold */
+#define ENETFEC_R_FIFO_SEM 0x194 /* Rx FIFO empty threshold */
+#define ENETFEC_R_FIFO_AEM 0x198 /* Rx FIFO almost empty threshold */
+#define ENETFEC_R_FIFO_AFL 0x19c /* Rx FIFO almost full threshold */
+#define ENETFEC_FRAME_TRL 0x1b0 /* Frame truncation length */
+
+#endif /*__ENETFEC_REGS_H */
diff --git a/drivers/net/enetfec/enet_uio.c b/drivers/net/enetfec/enet_uio.c
new file mode 100644
index 0000000000..99e9dccf5a
--- /dev/null
+++ b/drivers/net/enetfec/enet_uio.c
@@ -0,0 +1,284 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 NXP
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <dirent.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include "enet_pmd_logs.h"
+#include "enet_uio.h"
+
+static struct uio_job enetfec_uio_job;
+static int enetfec_count;
+
+/** @brief Checks if a file name contains a certain substring.
+ * This function assumes a filename format of: [text][number].
+ * @param [in] filename File name
+ * @param [in] match String to match in file name
+ *
+ * @retval true if file name matches the criteria
+ * @retval false if file name does not match the criteria
+ */
+static bool
+file_name_match_extract(const char filename[], const char match[])
+{
+ char *substr = NULL;
+
+ substr = strstr(filename, match);
+ if (substr == NULL)
+ return false;
+
+ return true;
+}
+
+/*
+ * @brief Reads first line from a file.
+ * Composes file name as: root/subdir/filename
+ *
+ * @param [in] root Root path
+ * @param [in] subdir Subdirectory name
+ * @param [in] filename File name
+ * @param [out] line The first line read from file.
+ *
+ * @retval 0 for success
+ * @retval other value for error
+ */
+static int
+file_read_first_line(const char root[], const char subdir[],
+ const char filename[], char *line)
+{
+ char absolute_file_name[FEC_UIO_MAX_ATTR_FILE_NAME];
+ int fd = 0, ret = 0;
+
+ /*compose the file name: root/subdir/filename */
+ memset(absolute_file_name, 0, sizeof(absolute_file_name));
+ snprintf(absolute_file_name, FEC_UIO_MAX_ATTR_FILE_NAME,
+ "%s/%s/%s", root, subdir, filename);
+
+ fd = open(absolute_file_name, O_RDONLY);
+ if (fd <= 0)
+ ENETFEC_PMD_ERR("Error opening file %s", absolute_file_name);
+
+ /* read UIO device name from first line in file */
+ ret = read(fd, line, FEC_UIO_MAX_DEVICE_FILE_NAME_LENGTH);
+ if (ret <= 0) {
+ ENETFEC_PMD_ERR("Error reading file %s", absolute_file_name);
+ return ret;
+ }
+ close(fd);
+
+ /* NULL-ify string */
+ line[ret] = '\0';
+
+ return 0;
+}
+
+/*
+ * @brief Maps rx-tx bd range assigned for a bd ring.
+ *
+ * @param [in] uio_device_fd UIO device file descriptor
+ * @param [in] uio_device_id UIO device id
+ * @param [in] uio_map_id UIO allows maximum 5 different mapping for
+ each device. Maps start with id 0.
+ * @param [out] map_size Map size.
+ * @param [out] map_addr Map physical address
+ *
+ * @retval NULL if failed to map registers
+ * @retval Virtual address for mapped register address range
+ */
+static void *
+uio_map_mem(int uio_device_fd, int uio_device_id,
+ int uio_map_id, int *map_size, uint64_t *map_addr)
+{
+ void *mapped_address = NULL;
+ unsigned int uio_map_size = 0;
+ unsigned int uio_map_p_addr = 0;
+ char uio_sys_root[FEC_UIO_MAX_ATTR_FILE_NAME];
+ char uio_sys_map_subdir[FEC_UIO_MAX_ATTR_FILE_NAME];
+ char uio_map_size_str[FEC_UIO_MAX_DEVICE_FILE_NAME_LENGTH + 1];
+ char uio_map_p_addr_str[32];
+ int ret = 0;
+
+ /* compose the file name: root/subdir/filename */
+ memset(uio_sys_root, 0, sizeof(uio_sys_root));
+ memset(uio_sys_map_subdir, 0, sizeof(uio_sys_map_subdir));
+ memset(uio_map_size_str, 0, sizeof(uio_map_size_str));
+ memset(uio_map_p_addr_str, 0, sizeof(uio_map_p_addr_str));
+
+ /* Compose string: /sys/class/uio/uioX */
+ snprintf(uio_sys_root, sizeof(uio_sys_root), "%s/%s%d",
+ FEC_UIO_DEVICE_SYS_ATTR_PATH, "uio", uio_device_id);
+ /* Compose string: maps/mapY */
+ snprintf(uio_sys_map_subdir, sizeof(uio_sys_map_subdir), "%s%d",
+ FEC_UIO_DEVICE_SYS_MAP_ATTR, uio_map_id);
+
+ /* Read first (and only) line from file
+ * /sys/class/uio/uioX/maps/mapY/size
+ */
+ ret = file_read_first_line(uio_sys_root, uio_sys_map_subdir,
+ "size", uio_map_size_str);
+ if (ret < 0) {
+ ENETFEC_PMD_ERR("file_read_first_line() failed");
+ return NULL;
+ }
+ ret = file_read_first_line(uio_sys_root, uio_sys_map_subdir,
+ "addr", uio_map_p_addr_str);
+ if (ret < 0) {
+ ENETFEC_PMD_ERR("file_read_first_line() failed");
+ return NULL;
+ }
+ /* Read mapping size and physical address expressed in hexa(base 16) */
+ uio_map_size = strtol(uio_map_size_str, NULL, 16);
+ uio_map_p_addr = strtol(uio_map_p_addr_str, NULL, 16);
+
+ if (uio_map_id == 0) {
+ /* Map the register address in user space when map_id is 0 */
+ mapped_address = mmap(0 /*dynamically choose virtual address */,
+ uio_map_size, PROT_READ | PROT_WRITE,
+ MAP_SHARED, uio_device_fd, 0);
+ } else {
+ /* Map the BD memory in user space */
+ mapped_address = mmap(NULL, uio_map_size,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED, uio_device_fd, (1 * MAP_PAGE_SIZE));
+ }
+
+ if (mapped_address == MAP_FAILED) {
+ ENETFEC_PMD_ERR("Failed to map! errno = %d uio job fd = %d,"
+ "uio device id = %d, uio map id = %d", errno,
+ uio_device_fd, uio_device_id, uio_map_id);
+ return NULL;
+ }
+
+ /* Save the map size to use it later on for munmap-ing */
+ *map_size = uio_map_size;
+ *map_addr = uio_map_p_addr;
+ ENETFEC_PMD_INFO("UIO dev[%d] mapped region [id =%d] size 0x%x at %p",
+ uio_device_id, uio_map_id, uio_map_size, mapped_address);
+
+ return mapped_address;
+}
+
+int
+config_enetfec_uio(struct enetfec_private *fep)
+{
+ char uio_device_file_name[32];
+ struct uio_job *uio_job = NULL;
+
+ /* Mapping is done only one time */
+ if (enetfec_count > 0) {
+ ENETFEC_PMD_INFO("Mapped!\n");
+ return 0;
+ }
+
+ uio_job = &enetfec_uio_job;
+
+ /* Find UIO device created by ENETFEC-UIO kernel driver */
+ memset(uio_device_file_name, 0, sizeof(uio_device_file_name));
+ snprintf(uio_device_file_name, sizeof(uio_device_file_name), "%s%d",
+ FEC_UIO_DEVICE_FILE_NAME, uio_job->uio_minor_number);
+
+ /* Open device file */
+ uio_job->uio_fd = open(uio_device_file_name, O_RDWR);
+ if (uio_job->uio_fd < 0) {
+ ENETFEC_PMD_WARN("Unable to open ENETFEC_UIO file\n");
+ return -1;
+ }
+
+ ENETFEC_PMD_INFO("US_UIO: Open device(%s) file with uio_fd = %d",
+ uio_device_file_name, uio_job->uio_fd);
+
+ fep->hw_baseaddr_v = uio_map_mem(uio_job->uio_fd,
+ uio_job->uio_minor_number, FEC_UIO_REG_MAP_ID,
+ &uio_job->map_size, &uio_job->map_addr);
+ if (fep->hw_baseaddr_v == NULL)
+ return -ENOMEM;
+ fep->hw_baseaddr_p = uio_job->map_addr;
+ fep->reg_size = uio_job->map_size;
+
+ fep->bd_addr_v = uio_map_mem(uio_job->uio_fd,
+ uio_job->uio_minor_number, FEC_UIO_BD_MAP_ID,
+ &uio_job->map_size, &uio_job->map_addr);
+ if (fep->hw_baseaddr_v == NULL)
+ return -ENOMEM;
+ fep->bd_addr_p = uio_job->map_addr;
+ fep->bd_size = uio_job->map_size;
+
+ enetfec_count++;
+
+ return 0;
+}
+
+int
+enetfec_configure(void)
+{
+ char uio_name[32];
+ int uio_minor_number = -1;
+ int ret;
+ DIR *d = NULL;
+ struct dirent *dir;
+
+ d = opendir(FEC_UIO_DEVICE_SYS_ATTR_PATH);
+ if (d == NULL) {
+ ENETFEC_PMD_ERR("\nError opening directory '%s': %s\n",
+ FEC_UIO_DEVICE_SYS_ATTR_PATH, strerror(errno));
+ return -1;
+ }
+
+ /* Iterate through all subdirs */
+ while ((dir = readdir(d)) != NULL) {
+ if (!strncmp(dir->d_name, ".", 1) ||
+ !strncmp(dir->d_name, "..", 2))
+ continue;
+
+ if (file_name_match_extract(dir->d_name, "uio")) {
+ /*
+ * As substring <uio> was found in <d_name>
+ * read number following <uio> substring in <d_name>
+ */
+ ret = sscanf(dir->d_name + strlen("uio"), "%d",
+ &uio_minor_number);
+ if (ret < 0)
+ ENETFEC_PMD_ERR("Error: not find minor number\n");
+ /*
+ * Open file uioX/name and read first line which
+ * contains the name for the device. Based on the
+ * name check if this UIO device is for enetfec.
+ */
+ memset(uio_name, 0, sizeof(uio_name));
+ ret = file_read_first_line(FEC_UIO_DEVICE_SYS_ATTR_PATH,
+ dir->d_name, "name", uio_name);
+ if (ret != 0) {
+ ENETFEC_PMD_INFO("file_read_first_line failed\n");
+ closedir(d);
+ return -1;
+ }
+
+ if (file_name_match_extract(uio_name,
+ FEC_UIO_DEVICE_NAME)) {
+ enetfec_uio_job.uio_minor_number =
+ uio_minor_number;
+ ENETFEC_PMD_INFO("enetfec device uio name: %s",
+ uio_name);
+ }
+ }
+ }
+ closedir(d);
+ return 0;
+}
+
+void
+enetfec_cleanup(struct enetfec_private *fep)
+{
+ munmap(fep->hw_baseaddr_v, fep->cbus_size);
+}
diff --git a/drivers/net/enetfec/enet_uio.h b/drivers/net/enetfec/enet_uio.h
new file mode 100644
index 0000000000..fec8ba6f95
--- /dev/null
+++ b/drivers/net/enetfec/enet_uio.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 NXP
+ */
+
+#include "enet_ethdev.h"
+
+/* Prefix path to sysfs directory where UIO device attributes are exported.
+ * Path for UIO device X is /sys/class/uio/uioX
+ */
+#define FEC_UIO_DEVICE_SYS_ATTR_PATH "/sys/class/uio"
+
+/* Subfolder in sysfs where mapping attributes are exported
+ * for each UIO device. Path for mapping Y for device X is:
+ * /sys/class/uio/uioX/maps/mapY
+ */
+#define FEC_UIO_DEVICE_SYS_MAP_ATTR "maps/map"
+
+/* Name of UIO device file prefix. Each UIO device will have a device file
+ * /dev/uioX, where X is the minor device number.
+ */
+#define FEC_UIO_DEVICE_FILE_NAME "/dev/uio"
+/*
+ * Name of UIO device. User space FEC will have a corresponding
+ * UIO device.
+ * Maximum length is #FEC_UIO_MAX_DEVICE_NAME_LENGTH.
+ *
+ * @note Must be kept in sync with FEC kernel driver
+ * define #FEC_UIO_DEVICE_NAME !
+ */
+#define FEC_UIO_DEVICE_NAME "imx-fec-uio"
+
+/* Maximum length for the name of an UIO device file.
+ * Device file name format is: /dev/uioX.
+ */
+#define FEC_UIO_MAX_DEVICE_FILE_NAME_LENGTH 30
+
+/* Maximum length for the name of an attribute file for an UIO device.
+ * Attribute files are exported in sysfs and have the name formatted as:
+ * /sys/class/uio/uioX/<attribute_file_name>
+ */
+#define FEC_UIO_MAX_ATTR_FILE_NAME 100
+
+/* The id for the mapping used to export ENETFEC registers and BD memory to
+ * user space through UIO device.
+ */
+#define FEC_UIO_REG_MAP_ID 0
+#define FEC_UIO_BD_MAP_ID 1
+
+#define MAP_PAGE_SIZE 4096
+
+struct uio_job {
+ uint32_t fec_id;
+ int uio_fd;
+ void *bd_start_addr;
+ void *register_base_addr;
+ int map_size;
+ uint64_t map_addr;
+ int uio_minor_number;
+};
+
+int enetfec_configure(void);
+int config_enetfec_uio(struct enetfec_private *fep);
+void enetfec_uio_init(void);
+void enetfec_cleanup(struct enetfec_private *fep);
diff --git a/drivers/net/enetfec/meson.build b/drivers/net/enetfec/meson.build
index 6d6c64c94b..57f316b8a5 100644
--- a/drivers/net/enetfec/meson.build
+++ b/drivers/net/enetfec/meson.build
@@ -6,4 +6,5 @@ if not is_linux
reason = 'only supported on linux'
endif
-sources = files('enet_ethdev.c')
+sources = files('enet_ethdev.c',
+ 'enet_uio.c')
--
2.17.1
next prev parent reply other threads:[~2021-11-09 11:34 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-01 11:42 [dpdk-dev] [PATCH v4 0/5] drivers/net: add NXP ENETFEC driver Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 1/5] net/enetfec: introduce " Apeksha Gupta
2021-10-19 18:39 ` [dpdk-dev] [PATCH v5 0/5] drivers/net: add " Apeksha Gupta
2021-10-19 18:39 ` [dpdk-dev] [PATCH v5 1/5] net/enetfec: introduce " Apeksha Gupta
2021-10-21 4:46 ` [dpdk-dev] [PATCH v6 0/5] drivers/net: add " Apeksha Gupta
2021-10-21 4:46 ` [dpdk-dev] [PATCH v6 1/5] net/enetfec: introduce " Apeksha Gupta
2021-10-21 5:24 ` Hemant Agrawal
2021-10-27 14:18 ` Ferruh Yigit
2021-11-08 18:42 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 0/5] drivers/net: add " Apeksha Gupta
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-03 23:27 ` Ferruh Yigit
2021-11-04 18:24 ` Ferruh Yigit
2021-11-08 19:13 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-09 11:34 ` [dpdk-dev] [PATCH v8 0/5] drivers/net: add " Apeksha Gupta
2021-11-09 11:34 ` [dpdk-dev] [PATCH v8 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-09 11:34 ` Apeksha Gupta [this message]
2021-11-09 11:34 ` [dpdk-dev] [PATCH v8 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-09 11:34 ` [dpdk-dev] [PATCH v8 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-09 11:34 ` [dpdk-dev] [PATCH v8 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 0/5] drivers/net: add NXP ENETFEC driver Apeksha Gupta
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-10 13:53 ` Ferruh Yigit
2021-11-13 4:31 ` [PATCH v10 0/5] drivers/net: add " Apeksha Gupta
2021-11-13 4:31 ` [PATCH v10 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-15 7:19 ` [PATCH v11 0/5] drivers/net: add " Apeksha Gupta
2021-11-15 7:19 ` [PATCH v11 1/5] net/enetfec: introduce " Apeksha Gupta
2021-11-15 10:07 ` Ferruh Yigit
2023-03-21 18:03 ` Ferruh Yigit
2023-03-23 6:00 ` Sachin Saxena (OSS)
2023-03-23 11:07 ` Ferruh Yigit
2023-03-23 11:09 ` Sachin Saxena (OSS)
2021-11-15 7:19 ` [PATCH v11 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-15 7:19 ` [PATCH v11 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-15 10:11 ` Ferruh Yigit
2021-11-15 10:24 ` Ferruh Yigit
2021-11-15 11:15 ` Ferruh Yigit
2021-11-15 7:19 ` [PATCH v11 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-15 7:19 ` [PATCH v11 5/5] net/enetfec: add features Apeksha Gupta
2021-11-15 9:44 ` [PATCH v11 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-11-15 15:05 ` Ferruh Yigit
2021-11-25 16:52 ` Ferruh Yigit
2021-11-13 4:31 ` [PATCH v10 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-13 4:31 ` [PATCH v10 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-13 17:11 ` Stephen Hemminger
2021-11-13 4:31 ` [PATCH v10 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-13 17:10 ` Stephen Hemminger
2021-11-13 4:31 ` [PATCH v10 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-10 13:54 ` Ferruh Yigit
2021-11-13 5:00 ` [EXT] " Apeksha Gupta
2021-11-15 10:06 ` Ferruh Yigit
2021-11-15 10:23 ` Ferruh Yigit
2021-11-15 10:29 ` Ferruh Yigit
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-10 13:56 ` Ferruh Yigit
2021-11-10 7:48 ` [dpdk-dev] [PATCH v9 5/5] net/enetfec: add features Apeksha Gupta
2021-11-10 13:57 ` Ferruh Yigit
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-11-04 18:25 ` Ferruh Yigit
2021-11-08 20:24 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-08 21:51 ` Ferruh Yigit
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-11-04 18:26 ` Ferruh Yigit
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 4/5] net/enetfec: add Rx/Tx support Apeksha Gupta
2021-11-04 18:28 ` Ferruh Yigit
2021-11-09 16:20 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-11-03 19:20 ` [dpdk-dev] [PATCH v7 5/5] net/enetfec: add features Apeksha Gupta
2021-11-04 18:31 ` [dpdk-dev] [PATCH v7 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-10-21 4:46 ` [dpdk-dev] [PATCH v6 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-27 14:21 ` Ferruh Yigit
2021-11-08 18:44 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21 4:46 ` [dpdk-dev] [PATCH v6 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-27 14:23 ` Ferruh Yigit
2021-11-08 18:45 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21 4:46 ` [dpdk-dev] [PATCH v6 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-27 14:25 ` Ferruh Yigit
2021-11-08 18:47 ` [dpdk-dev] [EXT] " Apeksha Gupta
2021-10-21 4:47 ` [dpdk-dev] [PATCH v6 5/5] net/enetfec: add features Apeksha Gupta
2021-10-27 14:26 ` Ferruh Yigit
2021-10-27 14:15 ` [dpdk-dev] [PATCH v6 0/5] drivers/net: add NXP ENETFEC driver Ferruh Yigit
2021-10-19 18:40 ` [dpdk-dev] [PATCH v5 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-19 18:40 ` [dpdk-dev] [PATCH v5 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-19 18:40 ` [dpdk-dev] [PATCH v5 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-19 18:40 ` [dpdk-dev] [PATCH v5 5/5] net/enetfec: add features Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 2/5] net/enetfec: add UIO support Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 3/5] net/enetfec: support queue configuration Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 4/5] net/enetfec: add enqueue and dequeue support Apeksha Gupta
2021-10-01 11:42 ` [dpdk-dev] [PATCH v4 5/5] net/enetfec: add features Apeksha Gupta
2021-10-17 10:49 ` [dpdk-dev] [PATCH v4 0/5] drivers/net: add NXP ENETFEC driver Apeksha Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109113432.11876-3-apeksha.gupta@nxp.com \
--to=apeksha.gupta@nxp.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=sachin.saxena@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).