From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Rasesh Mody <rmody@marvell.com>,
Shahed Shaikh <shshaikh@marvell.com>,
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>,
Qi Zhang <qi.z.zhang@intel.com>,
Xiao Wang <xiao.w.wang@intel.com>,
Ziyang Xuan <xuanziyang2@huawei.com>,
Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>,
Guoyang Zhou <zhouguoyang@huawei.com>,
Beilei Xing <beilei.xing@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>,
Qiming Yang <qiming.yang@intel.com>,
Rosen Xu <rosen.xu@intel.com>,
Haiyue Wang <haiyue.wang@intel.com>,
Jiawen Wu <jiawenwu@trustnetic.com>,
Jian Wang <jianwang@trustnetic.com>,
Maxime Coquelin <maxime.coquelin@redhat.com>,
Chenbo Xia <chenbo.xia@intel.com>,
Olivier Matz <olivier.matz@6wind.com>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>, dev@dpdk.org
Subject: [PATCH] net: add macro for VLAN header length
Date: Wed, 10 Nov 2021 17:40:29 +0000 [thread overview]
Message-ID: <20211110174029.614449-1-ferruh.yigit@intel.com> (raw)
Multiple drivers are defining macros for VLAN header length, to remove
the redundancy defining macro in the ether header.
And updated drivers to use the new macro.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
drivers/net/bnx2x/bnx2x_vfpf.c | 2 +-
drivers/net/bnx2x/bnx2x_vfpf.h | 2 --
drivers/net/cxgbe/cxgbe_compat.h | 1 -
drivers/net/cxgbe/sge.c | 2 +-
drivers/net/fm10k/fm10k.h | 2 --
drivers/net/fm10k/fm10k_ethdev.c | 2 +-
drivers/net/hinic/hinic_pmd_ethdev.h | 3 +--
drivers/net/i40e/i40e_ethdev.h | 4 +---
drivers/net/iavf/iavf.h | 3 +--
drivers/net/ice/ice_dcf_ethdev.c | 2 +-
drivers/net/ice/ice_ethdev.h | 4 +---
drivers/net/ipn3ke/ipn3ke_ethdev.h | 3 +--
drivers/net/ixgbe/ixgbe_ethdev.c | 4 ++--
drivers/net/ixgbe/ixgbe_ethdev.h | 1 -
drivers/net/ixgbe/ixgbe_rxtx.c | 4 ++--
drivers/net/ngbe/ngbe_ethdev.c | 2 +-
drivers/net/ngbe/ngbe_ethdev.h | 1 -
drivers/net/ngbe/ngbe_rxtx.c | 2 +-
drivers/net/txgbe/txgbe_ethdev.c | 2 +-
drivers/net/txgbe/txgbe_ethdev.h | 1 -
drivers/net/txgbe/txgbe_ethdev_vf.c | 2 +-
drivers/net/txgbe/txgbe_rxtx.c | 4 ++--
examples/vhost/main.c | 3 +--
lib/net/rte_ether.h | 5 +++--
24 files changed, 23 insertions(+), 38 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.c b/drivers/net/bnx2x/bnx2x_vfpf.c
index 0e8a92cd336e..945e3df84ff8 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/bnx2x/bnx2x_vfpf.c
@@ -54,7 +54,7 @@ bnx2x_check_bull(struct bnx2x_softc *sc)
if (valid_bitmap & (1 << MAC_ADDR_VALID) && memcmp(bull->mac, sc->old_bulletin.mac, ETH_ALEN))
rte_memcpy(&sc->link_params.mac_addr, bull->mac, ETH_ALEN);
if (valid_bitmap & (1 << VLAN_VALID))
- rte_memcpy(&bull->vlan, &sc->old_bulletin.vlan, VLAN_HLEN);
+ rte_memcpy(&bull->vlan, &sc->old_bulletin.vlan, RTE_VLAN_HLEN);
sc->old_bulletin = *bull;
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
index 7aab8b101aaa..957734126687 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/bnx2x/bnx2x_vfpf.h
@@ -10,8 +10,6 @@
#include "ecore_sp.h"
-#define VLAN_HLEN 4
-
struct vf_resource_query {
uint8_t num_rxqs;
uint8_t num_txqs;
diff --git a/drivers/net/cxgbe/cxgbe_compat.h b/drivers/net/cxgbe/cxgbe_compat.h
index 83ae1c2e5a83..8d3737fc6100 100644
--- a/drivers/net/cxgbe/cxgbe_compat.h
+++ b/drivers/net/cxgbe/cxgbe_compat.h
@@ -75,7 +75,6 @@ extern int cxgbe_mbox_logtype;
#define CXGBE_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
#define PTR_ALIGN(p, a) ((typeof(p))CXGBE_ALIGN((unsigned long)(p), (a)))
-#define VLAN_HLEN 4
#define ETHER_ADDR_LEN 6
#define rmb() rte_rmb() /* dpdk rte provided rmb */
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index 9e464cb3da9f..f623f3e68420 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -72,7 +72,7 @@ static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
{
struct sge *s = &adapter->sge;
- return CXGBE_ALIGN(s->pktshift + RTE_ETHER_HDR_LEN + VLAN_HLEN + mtu,
+ return CXGBE_ALIGN(s->pktshift + RTE_ETHER_HDR_LEN + RTE_VLAN_HLEN + mtu,
s->fl_align);
}
diff --git a/drivers/net/fm10k/fm10k.h b/drivers/net/fm10k/fm10k.h
index b7522a47a80b..7cfa29faa85a 100644
--- a/drivers/net/fm10k/fm10k.h
+++ b/drivers/net/fm10k/fm10k.h
@@ -81,8 +81,6 @@
RTE_MIN(((txq)->nb_desc - 2), (txq)->free_thresh)
#define FM10K_TX_RS_THRESH_DIV(txq) ((txq)->nb_desc)
-#define FM10K_VLAN_TAG_SIZE 4
-
/* Maximum number of MAC addresses per PF/VF */
#define FM10K_MAX_MACADDR_NUM 64
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index c25c32314065..7c85a057466a 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -759,7 +759,7 @@ fm10k_dev_rx_init(struct rte_eth_dev *dev)
/* It adds dual VLAN length for supporting dual VLAN */
if ((dev->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
- 2 * FM10K_VLAN_TAG_SIZE) > buf_size ||
+ 2 * RTE_VLAN_HLEN) > buf_size ||
rxq->offloads & RTE_ETH_RX_OFFLOAD_SCATTER) {
uint32_t reg;
dev->data->scattered_rx = 1;
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.h b/drivers/net/hinic/hinic_pmd_ethdev.h
index 8f1b3d58886f..5eca8b10b9e1 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.h
+++ b/drivers/net/hinic/hinic_pmd_ethdev.h
@@ -35,9 +35,8 @@
#define HINIC_MAX_MTU_SIZE 9600
#define HINIC_MIN_MTU_SIZE 256
-#define HINIC_VLAN_TAG_SIZE 4
#define HINIC_ETH_OVERHEAD \
- (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + HINIC_VLAN_TAG_SIZE * 2)
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + RTE_VLAN_HLEN * 2)
#define HINIC_MIN_FRAME_SIZE (HINIC_MIN_MTU_SIZE + HINIC_ETH_OVERHEAD)
#define HINIC_MAX_JUMBO_FRAME_SIZE (HINIC_MAX_MTU_SIZE + HINIC_ETH_OVERHEAD)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index d8042abbd9be..2d182f8000a6 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -27,8 +27,6 @@
*/
#define I40E_GL_RXERR1_H(_i) (0x00318004 + ((_i) * 8))
-#define I40E_VLAN_TAG_SIZE 4
-
#define I40E_AQ_LEN 32
#define I40E_AQ_BUF_SZ 4096
/* Number of queues per TC should be one of 1, 2, 4, 8, 16, 32, 64 */
@@ -292,7 +290,7 @@ struct rte_flow {
* Considering QinQ packet, the VLAN tag needs to be counted twice.
*/
#define I40E_ETH_OVERHEAD \
- (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + I40E_VLAN_TAG_SIZE * 2)
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + RTE_VLAN_HLEN * 2)
#define I40E_ETH_MAX_LEN (RTE_ETHER_MTU + I40E_ETH_OVERHEAD)
#define I40E_RXTX_BYTES_H_16_BIT(bytes) ((bytes) & ~I40E_48_BIT_MASK)
diff --git a/drivers/net/iavf/iavf.h b/drivers/net/iavf/iavf.h
index f413dbed833a..0bb5698583ba 100644
--- a/drivers/net/iavf/iavf.h
+++ b/drivers/net/iavf/iavf.h
@@ -78,9 +78,8 @@
/* The overhead from MTU to max frame size.
* Considering QinQ packet, the VLAN tag needs to be counted twice.
*/
-#define IAVF_VLAN_TAG_SIZE 4
#define IAVF_ETH_OVERHEAD \
- (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + IAVF_VLAN_TAG_SIZE * 2)
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + RTE_VLAN_HLEN * 2)
#define IAVF_ETH_MAX_LEN (RTE_ETHER_MTU + IAVF_ETH_OVERHEAD)
#define IAVF_32_BIT_WIDTH (CHAR_BIT * 4)
diff --git a/drivers/net/ice/ice_dcf_ethdev.c b/drivers/net/ice/ice_dcf_ethdev.c
index d1e675764127..28f7f7fb72c4 100644
--- a/drivers/net/ice/ice_dcf_ethdev.c
+++ b/drivers/net/ice/ice_dcf_ethdev.c
@@ -81,7 +81,7 @@ ice_dcf_init_rxq(struct rte_eth_dev *dev, struct ice_rx_queue *rxq)
rxq->max_pkt_len = max_pkt_len;
if ((dev_data->dev_conf.rxmode.offloads & RTE_ETH_RX_OFFLOAD_SCATTER) ||
- (rxq->max_pkt_len + 2 * ICE_VLAN_TAG_SIZE) > buf_size) {
+ (rxq->max_pkt_len + 2 * RTE_VLAN_HLEN) > buf_size) {
dev_data->scattered_rx = 1;
}
rxq->qrx_tail = hw->hw_addr + IAVF_QRX_TAIL1(rxq->queue_id);
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index 3a5bb9bbc625..d66b29671f1f 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -14,8 +14,6 @@
#include "base/ice_adminq_cmd.h"
#include "base/ice_flow.h"
-#define ICE_VLAN_TAG_SIZE 4
-
#define ICE_ADMINQ_LEN 32
#define ICE_SBIOQ_LEN 32
#define ICE_MAILBOXQ_LEN 32
@@ -136,7 +134,7 @@
* Considering QinQ packet, the VLAN tag needs to be counted twice.
*/
#define ICE_ETH_OVERHEAD \
- (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + ICE_VLAN_TAG_SIZE * 2)
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + RTE_VLAN_HLEN * 2)
#define ICE_ETH_MAX_LEN (RTE_ETHER_MTU + ICE_ETH_OVERHEAD)
#define ICE_RXTX_BYTES_HIGH(bytes) ((bytes) & ~ICE_40_BIT_MASK)
diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.h b/drivers/net/ipn3ke/ipn3ke_ethdev.h
index ba3f8821e235..041f13d9c365 100644
--- a/drivers/net/ipn3ke/ipn3ke_ethdev.h
+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.h
@@ -633,13 +633,12 @@ ipn3ke_tm_ops_get(struct rte_eth_dev *ethdev,
#define IPN3KE_MAC_RX_FRAME_CONTROL_EN_ALLMCAST_MASK \
IPN3KE_MASK(0x1, IPN3KE_MAC_RX_FRAME_CONTROL_EN_ALLMCAST_SHIFT)
-#define IPN3KE_VLAN_TAG_SIZE 4
/**
* The overhead from MTU to max frame size.
* Considering QinQ packet, the VLAN tag needs to be counted twice.
*/
#define IPN3KE_ETH_OVERHEAD \
- (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + IPN3KE_VLAN_TAG_SIZE * 2)
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + RTE_VLAN_HLEN * 2)
#define IPN3KE_ETH_MAX_LEN (RTE_ETHER_MTU + IPN3KE_ETH_OVERHEAD)
#define IPN3KE_MAC_FRAME_SIZE_MAX 9728
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 1911cf2fab05..fe61dba81d68 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5173,7 +5173,7 @@ ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
* scattered packets when this feature has not been enabled before.
*/
if (dev->data->dev_started && !dev->data->scattered_rx &&
- frame_size + 2 * IXGBE_VLAN_TAG_SIZE >
+ frame_size + 2 * RTE_VLAN_HLEN >
dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM) {
PMD_INIT_LOG(ERR, "Stop port first.");
return -EINVAL;
@@ -6341,7 +6341,7 @@ ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
* scattered packets when this feature has not been enabled before.
*/
if (dev_data->dev_started && !dev_data->scattered_rx &&
- (max_frame + 2 * IXGBE_VLAN_TAG_SIZE >
+ (max_frame + 2 * RTE_VLAN_HLEN >
dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
PMD_INIT_LOG(ERR, "Stop port first.");
return -EINVAL;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 876b670f2682..83e8b5e56a6f 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -43,7 +43,6 @@
#define IXGBE_NB_STAT_MAPPING_REGS 32
#define IXGBE_EXTENDED_VLAN (uint32_t)(1 << 26) /* EXTENDED VLAN ENABLE */
#define IXGBE_VFTA_SIZE 128
-#define IXGBE_VLAN_TAG_SIZE 4
#define IXGBE_HKEY_MAX_INDEX 10
#define IXGBE_MAX_RX_QUEUE_NUM 128
#define IXGBE_MAX_INTR_QUEUE_NUM 15
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index cd259430461a..d7c80d424263 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -5153,7 +5153,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
IXGBE_SRRCTL_BSIZEPKT_SHIFT);
/* It adds dual VLAN length for supporting dual VLAN */
- if (frame_size + 2 * IXGBE_VLAN_TAG_SIZE > buf_size)
+ if (frame_size + 2 * RTE_VLAN_HLEN > buf_size)
dev->data->scattered_rx = 1;
if (rxq->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
rx_conf->offloads |= RTE_ETH_RX_OFFLOAD_VLAN_STRIP;
@@ -5729,7 +5729,7 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_SCATTER ||
/* It adds dual VLAN length for supporting dual VLAN */
- (frame_size + 2 * IXGBE_VLAN_TAG_SIZE) > buf_size) {
+ (frame_size + 2 * RTE_VLAN_HLEN) > buf_size) {
if (!dev->data->scattered_rx)
PMD_INIT_LOG(DEBUG, "forcing scatter mode");
dev->data->scattered_rx = 1;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 775789f59607..981592f7f495 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -2488,7 +2488,7 @@ ngbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
* scattered packets when this feature has not been enabled before.
*/
if (dev_data->dev_started && !dev_data->scattered_rx &&
- (frame_size + 2 * NGBE_VLAN_TAG_SIZE >
+ (frame_size + 2 * RTE_VLAN_HLEN >
dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
PMD_INIT_LOG(ERR, "Stop port first.");
return -EINVAL;
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index c68582e5aea5..bb96f6a5e7e0 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -19,7 +19,6 @@
#define NGBE_FLAG_NEED_LINK_CONFIG ((uint32_t)(1 << 4))
#define NGBE_VFTA_SIZE 128
-#define NGBE_VLAN_TAG_SIZE 4
#define NGBE_HKEY_MAX_INDEX 10
/*Default value of Max Rx Queue*/
#define NGBE_MAX_RX_QUEUE_NUM 8
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 0feea92588a1..86a5ef5486ec 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -2951,7 +2951,7 @@ ngbe_dev_rx_init(struct rte_eth_dev *dev)
/* It adds dual VLAN length for supporting dual VLAN */
if (dev->data->mtu + NGBE_ETH_OVERHEAD +
- 2 * NGBE_VLAN_TAG_SIZE > buf_size)
+ 2 * RTE_VLAN_HLEN > buf_size)
dev->data->scattered_rx = 1;
if (rxq->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
rx_conf->offloads |= RTE_ETH_RX_OFFLOAD_VLAN_STRIP;
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 04afc6134142..47d0e6ea40f2 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -3461,7 +3461,7 @@ txgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
* scattered packets when this feature has not been enabled before.
*/
if (dev_data->dev_started && !dev_data->scattered_rx &&
- (frame_size + 2 * TXGBE_VLAN_TAG_SIZE >
+ (frame_size + 2 * RTE_VLAN_HLEN >
dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
PMD_INIT_LOG(ERR, "Stop port first.");
return -EINVAL;
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
index 8304b68292da..262dbb5e38ff 100644
--- a/drivers/net/txgbe/txgbe_ethdev.h
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -36,7 +36,6 @@
* FreeBSD driver.
*/
#define TXGBE_VFTA_SIZE 128
-#define TXGBE_VLAN_TAG_SIZE 4
#define TXGBE_HKEY_MAX_INDEX 10
/*Default value of Max Rx Queue*/
#define TXGBE_MAX_RX_QUEUE_NUM 128
diff --git a/drivers/net/txgbe/txgbe_ethdev_vf.c b/drivers/net/txgbe/txgbe_ethdev_vf.c
index 67ae69dec30a..c7c298ae2d02 100644
--- a/drivers/net/txgbe/txgbe_ethdev_vf.c
+++ b/drivers/net/txgbe/txgbe_ethdev_vf.c
@@ -1111,7 +1111,7 @@ txgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
* scattered packets when this feature has not been enabled before.
*/
if (dev_data->dev_started && !dev_data->scattered_rx &&
- (max_frame + 2 * TXGBE_VLAN_TAG_SIZE >
+ (max_frame + 2 * RTE_VLAN_HLEN >
dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
PMD_INIT_LOG(ERR, "Stop port first.");
return -EINVAL;
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
index 497af8d22d23..35b77cb271ba 100644
--- a/drivers/net/txgbe/txgbe_rxtx.c
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -4389,7 +4389,7 @@ txgbe_dev_rx_init(struct rte_eth_dev *dev)
/* It adds dual VLAN length for supporting dual VLAN */
if (dev->data->mtu + TXGBE_ETH_OVERHEAD +
- 2 * TXGBE_VLAN_TAG_SIZE > buf_size)
+ 2 * RTE_VLAN_HLEN > buf_size)
dev->data->scattered_rx = 1;
if (rxq->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
rx_conf->offloads |= RTE_ETH_RX_OFFLOAD_VLAN_STRIP;
@@ -4906,7 +4906,7 @@ txgbevf_dev_rx_init(struct rte_eth_dev *dev)
if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_SCATTER ||
/* It adds dual VLAN length for supporting dual VLAN */
(dev->data->mtu + TXGBE_ETH_OVERHEAD +
- 2 * TXGBE_VLAN_TAG_SIZE) > buf_size) {
+ 2 * RTE_VLAN_HLEN) > buf_size) {
if (!dev->data->scattered_rx)
PMD_INIT_LOG(DEBUG, "forcing scatter mode");
dev->data->scattered_rx = 1;
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 8685dfd81b1d..d1d28cec5d3b 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -195,7 +195,6 @@ struct vhost_bufftable *vhost_txbuff[RTE_MAX_LCORE * MAX_VHOST_DEVICE];
#define MBUF_TABLE_DRAIN_TSC ((rte_get_tsc_hz() + US_PER_S - 1) \
/ US_PER_S * BURST_TX_DRAIN_US)
-#define VLAN_HLEN 4
static inline int
open_dma(const char *value)
@@ -1010,7 +1009,7 @@ find_local_dest(struct vhost_dev *vdev, struct rte_mbuf *m,
* by minus length of vlan tag, so need restore
* the packet length by plus it.
*/
- *offset = VLAN_HLEN;
+ *offset = RTE_VLAN_HLEN;
*vlan_tag = vlan_tags[vdev->vid];
RTE_LOG_DP(DEBUG, VHOST_DATA,
diff --git a/lib/net/rte_ether.h b/lib/net/rte_ether.h
index 1a0dbf0d607c..f079b888c9c7 100644
--- a/lib/net/rte_ether.h
+++ b/lib/net/rte_ether.h
@@ -35,9 +35,10 @@ extern "C" {
(RTE_ETHER_MAX_LEN - RTE_ETHER_HDR_LEN - \
RTE_ETHER_CRC_LEN) /**< Ethernet MTU. */
+#define RTE_VLAN_HLEN 4
+/** Maximum VLAN frame length, including CRC. */
#define RTE_ETHER_MAX_VLAN_FRAME_LEN \
- (RTE_ETHER_MAX_LEN + 4)
- /**< Maximum VLAN frame length, including CRC. */
+ (RTE_ETHER_MAX_LEN + RTE_VLAN_HLEN)
#define RTE_ETHER_MAX_JUMBO_FRAME_LEN \
0x3F00 /**< Maximum Jumbo frame length, including CRC. */
--
2.31.1
next reply other threads:[~2021-11-10 17:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 17:40 Ferruh Yigit [this message]
2021-11-11 1:34 ` Wang, Haiyue
2021-11-12 2:36 ` Xu, Rosen
2021-11-12 6:09 ` Jiawen Wu
2021-11-16 23:14 ` Thomas Monjalon
2021-11-17 10:00 ` Ferruh Yigit
2021-11-17 10:02 ` Thomas Monjalon
2021-11-17 10:12 ` Ferruh Yigit
2021-11-17 18:08 ` [PATCH v2] " Ferruh Yigit
2021-11-17 18:24 ` [PATCH v3] " Ferruh Yigit
2021-11-17 18:54 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110174029.614449-1-ferruh.yigit@intel.com \
--to=ferruh.yigit@intel.com \
--cc=beilei.xing@intel.com \
--cc=chenbo.xia@intel.com \
--cc=cloud.wangxiaoyun@huawei.com \
--cc=dev@dpdk.org \
--cc=haiyue.wang@intel.com \
--cc=jianwang@trustnetic.com \
--cc=jiawenwu@trustnetic.com \
--cc=jingjing.wu@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=olivier.matz@6wind.com \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
--cc=rahul.lakkireddy@chelsio.com \
--cc=rmody@marvell.com \
--cc=rosen.xu@intel.com \
--cc=shshaikh@marvell.com \
--cc=xiao.w.wang@intel.com \
--cc=xuanziyang2@huawei.com \
--cc=zhouguoyang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).