From: <lironh@marvell.com>
To: <jerinj@marvell.com>
Cc: <dev@dpdk.org>, Liron Himi <lironh@marvell.com>
Subject: [PATCH v3 2/5] common/cnxk: add REE mbox definitions
Date: Mon, 29 Nov 2021 21:47:33 +0200 [thread overview]
Message-ID: <20211129194736.14518-4-lironh@marvell.com> (raw)
In-Reply-To: <20211129194736.14518-1-lironh@marvell.com>
From: Liron Himi <lironh@marvell.com>
add REE mbox definitions
Signed-off-by: Liron Himi <lironh@marvell.com>
---
drivers/common/cnxk/roc_mbox.h | 100 +++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/common/cnxk/roc_mbox.h b/drivers/common/cnxk/roc_mbox.h
index b63fe108c9..e97d93e261 100644
--- a/drivers/common/cnxk/roc_mbox.h
+++ b/drivers/common/cnxk/roc_mbox.h
@@ -151,6 +151,16 @@ struct mbox_msghdr {
M(CPT_GET_CAPS, 0xBFD, cpt_caps_get, msg_req, cpt_caps_rsp_msg) \
M(CPT_GET_ENG_GRP, 0xBFF, cpt_eng_grp_get, cpt_eng_grp_req, \
cpt_eng_grp_rsp) \
+ /* REE mbox IDs (range 0xE00 - 0xFFF) */ \
+ M(REE_CONFIG_LF, 0xE01, ree_config_lf, ree_lf_req_msg, msg_rsp) \
+ M(REE_RD_WR_REGISTER, 0xE02, ree_rd_wr_register, ree_rd_wr_reg_msg, \
+ ree_rd_wr_reg_msg) \
+ M(REE_RULE_DB_PROG, 0xE03, ree_rule_db_prog, ree_rule_db_prog_req_msg, \
+ msg_rsp) \
+ M(REE_RULE_DB_LEN_GET, 0xE04, ree_rule_db_len_get, ree_req_msg, \
+ ree_rule_db_len_rsp_msg) \
+ M(REE_RULE_DB_GET, 0xE05, ree_rule_db_get, ree_rule_db_get_req_msg, \
+ ree_rule_db_get_rsp_msg) \
/* SDP mbox IDs (range 0x1000 - 0x11FF) */ \
M(SET_SDP_CHAN_INFO, 0x1000, set_sdp_chan_info, sdp_chan_info_msg, \
msg_rsp) \
@@ -1452,6 +1462,96 @@ struct cpt_eng_grp_rsp {
uint8_t __io eng_grp_num;
};
+/* REE mailbox error codes
+ * Range 1001 - 1100.
+ */
+enum ree_af_status {
+ REE_AF_ERR_RULE_UNKNOWN_VALUE = -1001,
+ REE_AF_ERR_LF_NO_MORE_RESOURCES = -1002,
+ REE_AF_ERR_LF_INVALID = -1003,
+ REE_AF_ERR_ACCESS_DENIED = -1004,
+ REE_AF_ERR_RULE_DB_PARTIAL = -1005,
+ REE_AF_ERR_RULE_DB_EQ_BAD_VALUE = -1006,
+ REE_AF_ERR_RULE_DB_BLOCK_ALLOC_FAILED = -1007,
+ REE_AF_ERR_BLOCK_NOT_IMPLEMENTED = -1008,
+ REE_AF_ERR_RULE_DB_INC_OFFSET_TOO_BIG = -1009,
+ REE_AF_ERR_RULE_DB_OFFSET_TOO_BIG = -1010,
+ REE_AF_ERR_Q_IS_GRACEFUL_DIS = -1011,
+ REE_AF_ERR_Q_NOT_GRACEFUL_DIS = -1012,
+ REE_AF_ERR_RULE_DB_ALLOC_FAILED = -1013,
+ REE_AF_ERR_RULE_DB_TOO_BIG = -1014,
+ REE_AF_ERR_RULE_DB_GEQ_BAD_VALUE = -1015,
+ REE_AF_ERR_RULE_DB_LEQ_BAD_VALUE = -1016,
+ REE_AF_ERR_RULE_DB_WRONG_LENGTH = -1017,
+ REE_AF_ERR_RULE_DB_WRONG_OFFSET = -1018,
+ REE_AF_ERR_RULE_DB_BLOCK_TOO_BIG = -1019,
+ REE_AF_ERR_RULE_DB_SHOULD_FILL_REQUEST = -1020,
+ REE_AF_ERR_RULE_DBI_ALLOC_FAILED = -1021,
+ REE_AF_ERR_LF_WRONG_PRIORITY = -1022,
+ REE_AF_ERR_LF_SIZE_TOO_BIG = -1023,
+};
+
+/* REE mbox message formats */
+
+struct ree_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __io blkaddr;
+};
+
+struct ree_lf_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __io blkaddr;
+ uint32_t __io size;
+ uint8_t __io lf;
+ uint8_t __io pri;
+};
+
+struct ree_rule_db_prog_req_msg {
+ struct mbox_msghdr hdr;
+#define REE_RULE_DB_REQ_BLOCK_SIZE ((64ULL * 1024ULL) >> 1)
+ uint8_t __io rule_db[REE_RULE_DB_REQ_BLOCK_SIZE];
+ uint32_t __io blkaddr; /* REE0 or REE1 */
+ uint32_t __io total_len; /* total len of rule db */
+ uint32_t __io offset; /* offset of current rule db block */
+ uint16_t __io len; /* length of rule db block */
+ uint8_t __io is_last; /* is this the last block */
+ uint8_t __io is_incremental; /* is incremental flow */
+ uint8_t __io is_dbi; /* is rule db incremental */
+};
+
+struct ree_rule_db_get_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __io blkaddr;
+ uint32_t __io offset; /* retrieve db from this offset */
+ uint8_t __io is_dbi; /* is request for rule db incremental */
+};
+
+struct ree_rd_wr_reg_msg {
+ struct mbox_msghdr hdr;
+ uint64_t __io reg_offset;
+ uint64_t __io *ret_val;
+ uint64_t __io val;
+ uint32_t __io blkaddr;
+ uint8_t __io is_write;
+};
+
+struct ree_rule_db_len_rsp_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __io blkaddr;
+ uint32_t __io len;
+ uint32_t __io inc_len;
+};
+
+struct ree_rule_db_get_rsp_msg {
+ struct mbox_msghdr hdr;
+#define REE_RULE_DB_RSP_BLOCK_SIZE (15ULL * 1024ULL)
+ uint8_t __io rule_db[REE_RULE_DB_RSP_BLOCK_SIZE];
+ uint32_t __io total_len; /* total len of rule db */
+ uint32_t __io offset; /* offset of current rule db block */
+ uint16_t __io len; /* length of rule db block */
+ uint8_t __io is_last; /* is this the last block */
+};
+
/* NPC mbox message structs */
#define NPC_MCAM_ENTRY_INVALID 0xFFFF
--
2.28.0
next prev parent reply other threads:[~2021-11-29 19:48 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-03 6:23 [dpdk-dev] [PATCH] common/cnxk: add REE support lironh
2021-10-28 9:30 ` Jerin Jacob
2021-11-23 19:13 ` [PATCH v2 0/5] regex/cn9k: use cnxk infrastructure lironh
2021-11-23 19:13 ` [PATCH v2 1/5] common/cnxk: add REE HW definitions lironh
2021-11-23 19:13 ` [PATCH v2 2/5] common/cnxk: add REE mbox definitions lironh
2021-11-23 19:13 ` [PATCH v2 3/5] common/cnxk: add REE support lironh
2021-11-23 19:13 ` [PATCH v2 4/5] common/cnxk: link REE support to ROC files lironh
2021-11-23 19:13 ` [PATCH v2 5/5] regex/cn9k: use cnxk infrastructure lironh
[not found] ` <20211123193835.20601-1-robot@bytheb.org>
2021-11-28 20:17 ` [EXT] |FAILURE| pw104631 " Liron Himi
2021-11-28 20:37 ` Thomas Monjalon
2021-11-29 9:55 ` Liron Himi
2021-11-29 10:10 ` Thomas Monjalon
2021-11-29 19:47 ` [PATCH v2 0/5] " lironh
2021-11-29 19:47 ` [PATCH v3 " lironh
2021-11-29 19:47 ` [PATCH v3 1/5] common/cnxk: add REE HW definitions lironh
2021-12-07 18:31 ` [PATCH v4 0/4] regex/cn9k: use cnxk infrastructure lironh
2021-12-07 18:31 ` [PATCH v4 1/4] common/cnxk: add REE HW definitions lironh
2021-12-07 18:31 ` [PATCH v4 2/4] common/cnxk: add REE mbox definitions lironh
2021-12-07 18:31 ` [PATCH v4 3/4] common/cnxk: add REE support lironh
2021-12-07 18:31 ` [PATCH v4 4/4] regex/cn9k: use cnxk infrastructure lironh
2021-12-08 9:14 ` [PATCH v4 0/4] " Jerin Jacob
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 0/5] remove octeontx2 drivers jerinj
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 1/5] common/cnxk: add REE HW definitions jerinj
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 2/5] common/cnxk: add REE mbox definitions jerinj
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 3/5] common/cnxk: add REE support jerinj
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 4/5] regex/cn9k: use cnxk infrastructure jerinj
2021-12-11 9:04 ` [dpdk-dev] [PATCH v5 5/5] drivers: remove octeontx2 drivers jerinj
2021-12-14 8:57 ` Ruifeng Wang
2022-01-12 14:37 ` [dpdk-dev] [PATCH v5 0/5] " Thomas Monjalon
2021-11-29 19:47 ` lironh [this message]
2021-11-29 19:47 ` [PATCH v3 3/5] common/cnxk: add REE support lironh
2021-11-29 19:47 ` [PATCH v3 4/5] common/cnxk: link REE support to ROC files lironh
2021-11-29 19:47 ` [PATCH v3 5/5] regex/cn9k: use cnxk infrastructure lironh
2021-11-29 19:49 ` [PATCH v3 0/5] " lironh
2021-11-29 19:49 ` [PATCH v3 1/5] common/cnxk: add REE HW definitions lironh
2021-11-29 19:49 ` [PATCH v3 2/5] common/cnxk: add REE mbox definitions lironh
2021-11-29 19:49 ` [PATCH v3 3/5] common/cnxk: add REE support lironh
2021-11-29 19:49 ` [PATCH v3 4/5] common/cnxk: link REE support to ROC files lironh
2021-11-29 19:49 ` [PATCH v3 5/5] regex/cn9k: use cnxk infrastructure lironh
2021-11-29 19:59 ` [PATCH v3 0/5] " lironh
2021-11-29 19:59 ` [PATCH v3 1/5] common/cnxk: add REE HW definitions lironh
2021-11-29 19:59 ` [PATCH v3 2/5] common/cnxk: add REE mbox definitions lironh
2021-11-29 19:59 ` [PATCH v3 3/5] common/cnxk: add REE support lironh
2021-11-29 19:59 ` [PATCH v3 4/5] common/cnxk: link REE support to ROC files lironh
2021-12-06 5:07 ` Jerin Jacob
2021-12-06 6:54 ` [EXT] " Liron Himi
2021-12-06 8:08 ` Jerin Jacob
2021-11-29 19:59 ` [PATCH v3 5/5] regex/cn9k: use cnxk infrastructure lironh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211129194736.14518-4-lironh@marvell.com \
--to=lironh@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).