DPDK patches and discussions
 help / color / mirror / Atom feed
From: Stephen Douthit <stephend@silicom-usa.com>
To: Haiyue Wang <haiyue.wang@intel.com>,
	Xiao Wang <xiao.w.wang@intel.com>,
	Wenzhuo Lu <wenzhuo.lu@intel.com>
Cc: dev@dpdk.org, wenw@silicom-usa.com,
	Stephen Douthit <stephend@silicom-usa.com>,
	stable@dpdk.org
Subject: [PATCH v2 2/7] net/ixgbe: Add ixgbe_check_sfp_cage() for testing state of PRSNT# signal
Date: Mon,  6 Dec 2021 17:19:16 -0500	[thread overview]
Message-ID: <20211206221922.644187-3-stephend@silicom-usa.com> (raw)
In-Reply-To: <20211206221922.644187-1-stephend@silicom-usa.com>

Refactor the SFP check code from ixgbe_check_mac_link_generic into its own
function.

Note that the SFP present status was inverted for the X550EM family of
devices, where SDP0 represents the active low PRSNT# signal from the cage.

Call the new function in ixgbe_identify_module_generic() to short circuit
the I2C polling and greatly speed things up for devices we know are
absent.

Fixes: dd3a93cf5a2 ("net/ixgbe/base: bypass checking link for crosstalk")
Cc: stable@dpdk.org

Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
---
 drivers/net/ixgbe/base/ixgbe_common.c | 60 +++++++++++++++++++--------
 drivers/net/ixgbe/base/ixgbe_common.h |  8 ++++
 drivers/net/ixgbe/base/ixgbe_phy.c    |  8 ++++
 3 files changed, 58 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index aa843bd5c4..2764cf7cf1 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -4124,6 +4124,45 @@ static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
 	return true;
 }
 
+/**
+ * ixgbe_check_sfp_cage - Find present status of SFP module
+ * @hw: pointer to hardware structure
+ *
+ * Find if a SFP module is present and if this device supports SFPs
+ **/
+enum ixgbe_sfp_cage_status ixgbe_check_sfp_cage(struct ixgbe_hw *hw)
+{
+	enum ixgbe_sfp_cage_status status;
+
+	/* If we're not a fiber/fiber_qsfp, no cage to check */
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_fiber_qsfp:
+		break;
+	default:
+		return IXGBE_SFP_CAGE_NOCAGE;
+	}
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		status = !!(IXGBE_READ_REG(hw, IXGBE_ESDP) &
+			     IXGBE_ESDP_SDP2);
+		break;
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		/* SDP0 is the active low signal PRSNT#, so invert this */
+		status = !(IXGBE_READ_REG(hw, IXGBE_ESDP) &
+				  IXGBE_ESDP_SDP0);
+		break;
+	default:
+		/* Don't know how to check this device type yet */
+		status = IXGBE_SFP_CAGE_UNKNOWN;
+		break;
+	}
+
+	return status;
+}
+
 /**
  * ixgbe_check_mac_link_generic - Determine link and speed status
  * @hw: pointer to hardware structure
@@ -4145,25 +4184,10 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	 * the SFP+ cage is full.
 	 */
 	if (ixgbe_need_crosstalk_fix(hw)) {
-		u32 sfp_cage_full;
-
-		switch (hw->mac.type) {
-		case ixgbe_mac_82599EB:
-			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
-					IXGBE_ESDP_SDP2;
-			break;
-		case ixgbe_mac_X550EM_x:
-		case ixgbe_mac_X550EM_a:
-			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
-					IXGBE_ESDP_SDP0;
-			break;
-		default:
-			/* sanity check - No SFP+ devices here */
-			sfp_cage_full = false;
-			break;
-		}
+		enum ixgbe_sfp_cage_status sfp_cage_status;
 
-		if (!sfp_cage_full) {
+		sfp_cage_status = ixgbe_check_sfp_cage(hw);
+		if (sfp_cage_status != IXGBE_SFP_CAGE_FULL) {
 			*link_up = false;
 			*speed = IXGBE_LINK_SPEED_UNKNOWN;
 			return IXGBE_SUCCESS;
diff --git a/drivers/net/ixgbe/base/ixgbe_common.h b/drivers/net/ixgbe/base/ixgbe_common.h
index 5bdb484407..30db9a08c4 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.h
+++ b/drivers/net/ixgbe/base/ixgbe_common.h
@@ -112,6 +112,14 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
 s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass);
 
+enum ixgbe_sfp_cage_status {
+	IXGBE_SFP_CAGE_EMPTY = 0,
+	IXGBE_SFP_CAGE_FULL,
+	IXGBE_SFP_CAGE_UNKNOWN = -1,
+	IXGBE_SFP_CAGE_NOCAGE = -2,
+};
+enum ixgbe_sfp_cage_status ixgbe_check_sfp_cage(struct ixgbe_hw *hw);
+
 s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
 			       ixgbe_link_speed *speed,
 			       bool *link_up, bool link_up_wait_to_complete);
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 8d4d9bbfef..d8d51d2c3f 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -1228,9 +1228,17 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+	enum ixgbe_sfp_cage_status sfp_cage_status;
 
 	DEBUGFUNC("ixgbe_identify_module_generic");
 
+	sfp_cage_status = ixgbe_check_sfp_cage(hw);
+	if (sfp_cage_status == IXGBE_SFP_CAGE_EMPTY ||
+	    sfp_cage_status == IXGBE_SFP_CAGE_NOCAGE) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		return status;
+	}
+
 	switch (hw->mac.ops.get_media_type(hw)) {
 	case ixgbe_media_type_fiber:
 		status = ixgbe_identify_sfp_module_generic(hw);
-- 
2.31.1


  parent reply	other threads:[~2021-12-06 22:20 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-06 22:19 [PATCH v2 0/7] ixgbe SFP handling fixes Stephen Douthit
2021-12-06 22:19 ` [PATCH v2 1/7] net/ixgbe: Fix ixgbe_is_sfp() to return valid result for X550EM_a devs Stephen Douthit
2021-12-20  7:45   ` Wang, Haiyue
2021-12-20 21:32     ` Stephen Douthit
2021-12-06 22:19 ` Stephen Douthit [this message]
2021-12-06 22:19 ` [PATCH v2 3/7] net/ixgbe: Check that SFF-8472 soft rate select is supported before write Stephen Douthit
2021-12-20  7:53   ` Wang, Haiyue
2021-12-20 21:32     ` Stephen Douthit
2021-12-21  1:15       ` Wang, Haiyue
2021-12-21  8:57         ` Morten Brørup
2021-12-22  1:24           ` Wang, Haiyue
2021-12-22 10:43             ` Morten Brørup
2021-12-22 16:03               ` Wang, Haiyue
2021-12-22 19:13                 ` Morten Brørup
2021-12-22 21:44                 ` Stephen Douthit
2021-12-23  0:55                   ` Wang, Haiyue
2022-01-18 21:06                     ` Stephen Douthit
2022-01-19  0:31                       ` Wang, Haiyue
2022-02-07 16:04                         ` Ferruh Yigit
2022-02-08 13:50                           ` Jeff Daly
2022-02-08 14:52                             ` Ferruh Yigit
2022-02-09  4:00                               ` Wang, Haiyue
2022-02-09 13:33                                 ` Ferruh Yigit
2022-02-09 13:43                                   ` Wang, Haiyue
2021-12-21 14:05         ` Stephen Douthit
2021-12-06 22:19 ` [PATCH v2 4/7] net/ixgbe: Run 82599 link status workaround only on affected devices Stephen Douthit
2021-12-06 22:19 ` [PATCH v2 5/7] net/ixgbe: Fix SFP detection and linking on hotplug Stephen Douthit
2022-02-07 16:07   ` Ferruh Yigit
2021-12-06 22:19 ` [PATCH v2 6/7] net/ixgbe: Retry SFP ID read field to handle misbehaving SFPs Stephen Douthit
2021-12-06 22:19 ` [PATCH v2 7/7] net/ixgbe: Treat 1G Cu SFPs as 1G SX on the X550 devices Stephen Douthit
2021-12-17  9:29 ` [PATCH v2 0/7] ixgbe SFP handling fixes Thomas Monjalon
2022-02-24 15:23 ` [PATCH v3 0/3] " Jeff Daly
2022-02-24 15:23   ` [PATCH v3 1/3] net/ixgbe: Fix ixgbe_is_sfp() to return valid result for X550EM_a devs Jeff Daly
2022-02-24 15:23   ` [PATCH v3 2/3] net/ixgbe: Limit SDP3 check of TX_DISABLE to appropriate devices Jeff Daly
2022-02-24 15:23   ` [PATCH v3 3/3] net/ixgbe: Fix SFP detection and linking on hotplug Jeff Daly
2022-02-25  1:56     ` Wang, Haiyue
2022-02-25 20:50 ` [PATCH v4 " Jeff Daly
2022-02-26 15:57   ` Ferruh Yigit
2022-02-28 15:29 ` [PATCH v4 0/3] ixgbe SFP handling fixes Jeff Daly
2022-02-28 15:29   ` [PATCH v4 1/3] net/ixgbe: Fix ixgbe_is_sfp() to return valid result for X550EM_a devs Jeff Daly
2022-03-01  5:56     ` Wang, Haiyue
2022-03-01 11:18       ` Zhang, Qi Z
2022-03-06 17:56         ` Thomas Monjalon
2022-03-08 15:01           ` Jeff Daly
2022-02-28 15:29   ` [PATCH v4 2/3] net/ixgbe: Limit SDP3 check of TX_DISABLE to appropriate devices Jeff Daly
2022-02-28 15:29   ` [PATCH v4 3/3] net/ixgbe: Fix SFP detection and linking on hotplug Jeff Daly
2022-03-12 13:03     ` Jeff Daly
2022-03-10 12:35   ` [PATCH v4 0/3] ixgbe SFP handling fixes Zhang, Qi Z
2022-04-12 17:34   ` [PATCH v5 0/2] " Jeff Daly
2022-04-12 17:34     ` [PATCH v5 1/2] net/ixgbe: Limit SDP3 check of TX_DISABLE to appropriate devices Jeff Daly
2022-04-12 17:34     ` [PATCH v5 2/2] net/ixgbe: Fix SFP detection and linking on hotplug Jeff Daly
2022-04-12 17:42   ` [PATCH v6 0/2] ixgbe SFP handling fixes Jeff Daly
2022-04-12 17:42     ` [PATCH v6 1/2] net/ixgbe: Limit SDP3 check of TX_DISABLE to appropriate devices Jeff Daly
2022-04-13  1:21       ` Wang, Haiyue
2022-04-13 15:32         ` Jeff Daly
2022-04-14  1:56           ` Wang, Haiyue
2022-04-12 17:42     ` [PATCH v6 2/2] net/ixgbe: Fix SFP detection and linking on hotplug Jeff Daly
2022-04-13  2:46       ` Wang, Haiyue
2022-04-13  6:57         ` Morten Brørup
2022-04-13  7:01           ` Wang, Haiyue
2022-04-13  7:19             ` Morten Brørup
2022-04-13 11:49               ` Wang, Haiyue
2022-04-13 12:54                 ` Morten Brørup
2022-04-13 15:23               ` Jeff Daly
2022-04-14 10:49         ` Jeff Daly
2022-04-14 11:08           ` Jeff Daly
2022-04-14  2:49       ` Wang, Haiyue
2022-04-14  2:59         ` Wang, Haiyue
2022-04-14 10:40           ` Jeff Daly
2022-04-14 12:11             ` Wang, Haiyue
2022-04-18 21:54               ` Jeff Daly
2022-04-19  2:05                 ` Wang, Haiyue
2022-04-19 17:33                   ` Jeff Daly
2022-04-20  1:09                     ` Wang, Haiyue
2022-04-21 17:31                       ` Jeff Daly
2022-04-22  2:11                         ` Wang, Haiyue
2022-05-12  1:26       ` Zhang, Qi Z
2022-05-25 16:55         ` Jeff Daly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211206221922.644187-3-stephend@silicom-usa.com \
    --to=stephend@silicom-usa.com \
    --cc=dev@dpdk.org \
    --cc=haiyue.wang@intel.com \
    --cc=stable@dpdk.org \
    --cc=wenw@silicom-usa.com \
    --cc=wenzhuo.lu@intel.com \
    --cc=xiao.w.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).