From: Xiaoyun Li <xiaoyun.li@intel.com>
To: ktraynor@redhat.com, Aman.Deep.Singh@intel.com,
ferruh.yigit@intel.com, olivier.matz@6wind.com,
mb@smartsharesystems.com, konstantin.ananyev@intel.com,
stephen@networkplumber.org, vladimir.medvedkin@intel.com
Cc: dev@dpdk.org, Xiaoyun Li <xiaoyun.li@intel.com>,
Sunil Pai G <sunil.pai.g@intel.com>
Subject: [PATCH v6 2/2] app/testpmd: enable L4 SW csum over multi segments
Date: Mon, 24 Jan 2022 20:28:57 +0800 [thread overview]
Message-ID: <20220124122857.1104668-3-xiaoyun.li@intel.com> (raw)
In-Reply-To: <20220124122857.1104668-1-xiaoyun.li@intel.com>
Csum forwarding mode only supports software UDP/TCP csum calculation
for single segment packets when hardware offload is not enabled.
This patch enables software UDP/TCP csum calculation over multiple
segments.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
---
app/test-pmd/csumonly.c | 41 ++++++++++++++++----------
doc/guides/rel_notes/release_22_03.rst | 2 ++
2 files changed, 28 insertions(+), 15 deletions(-)
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 2aeea243b6..0fbe1f1be7 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -96,12 +96,13 @@ struct simple_gre_hdr {
} __rte_packed;
static uint16_t
-get_udptcp_checksum(void *l3_hdr, void *l4_hdr, uint16_t ethertype)
+get_udptcp_checksum(struct rte_mbuf *m, void *l3_hdr, uint16_t l4_off,
+ uint16_t ethertype)
{
if (ethertype == _htons(RTE_ETHER_TYPE_IPV4))
- return rte_ipv4_udptcp_cksum(l3_hdr, l4_hdr);
+ return rte_ipv4_udptcp_cksum_mbuf(m, l3_hdr, l4_off);
else /* assume ethertype == RTE_ETHER_TYPE_IPV6 */
- return rte_ipv6_udptcp_cksum(l3_hdr, l4_hdr);
+ return rte_ipv6_udptcp_cksum_mbuf(m, l3_hdr, l4_off);
}
/* Parse an IPv4 header to fill l3_len, l4_len, and l4_proto */
@@ -460,7 +461,7 @@ parse_encap_ip(void *encap_ip, struct testpmd_offload_info *info)
* depending on the testpmd command line configuration */
static uint64_t
process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
- uint64_t tx_offloads)
+ uint64_t tx_offloads, struct rte_mbuf *m)
{
struct rte_ipv4_hdr *ipv4_hdr = l3_hdr;
struct rte_udp_hdr *udp_hdr;
@@ -468,6 +469,7 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
struct rte_sctp_hdr *sctp_hdr;
uint64_t ol_flags = 0;
uint32_t max_pkt_len, tso_segsz = 0;
+ uint16_t l4_off;
/* ensure packet is large enough to require tso */
if (!info->is_tunnel) {
@@ -510,9 +512,15 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
if (tx_offloads & RTE_ETH_TX_OFFLOAD_UDP_CKSUM) {
ol_flags |= RTE_MBUF_F_TX_UDP_CKSUM;
} else {
+ if (info->is_tunnel)
+ l4_off = info->l2_len +
+ info->outer_l3_len +
+ info->l2_len + info->l3_len;
+ else
+ l4_off = info->l2_len + info->l3_len;
udp_hdr->dgram_cksum = 0;
udp_hdr->dgram_cksum =
- get_udptcp_checksum(l3_hdr, udp_hdr,
+ get_udptcp_checksum(m, l3_hdr, l4_off,
info->ethertype);
}
}
@@ -527,9 +535,14 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
else if (tx_offloads & RTE_ETH_TX_OFFLOAD_TCP_CKSUM) {
ol_flags |= RTE_MBUF_F_TX_TCP_CKSUM;
} else {
+ if (info->is_tunnel)
+ l4_off = info->l2_len + info->outer_l3_len +
+ info->l2_len + info->l3_len;
+ else
+ l4_off = info->l2_len + info->l3_len;
tcp_hdr->cksum = 0;
tcp_hdr->cksum =
- get_udptcp_checksum(l3_hdr, tcp_hdr,
+ get_udptcp_checksum(m, l3_hdr, l4_off,
info->ethertype);
}
#ifdef RTE_LIB_GSO
@@ -557,7 +570,7 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
/* Calculate the checksum of outer header */
static uint64_t
process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info *info,
- uint64_t tx_offloads, int tso_enabled)
+ uint64_t tx_offloads, int tso_enabled, struct rte_mbuf *m)
{
struct rte_ipv4_hdr *ipv4_hdr = outer_l3_hdr;
struct rte_ipv6_hdr *ipv6_hdr = outer_l3_hdr;
@@ -611,12 +624,9 @@ process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info *info,
/* do not recalculate udp cksum if it was 0 */
if (udp_hdr->dgram_cksum != 0) {
udp_hdr->dgram_cksum = 0;
- if (info->outer_ethertype == _htons(RTE_ETHER_TYPE_IPV4))
- udp_hdr->dgram_cksum =
- rte_ipv4_udptcp_cksum(ipv4_hdr, udp_hdr);
- else
- udp_hdr->dgram_cksum =
- rte_ipv6_udptcp_cksum(ipv6_hdr, udp_hdr);
+ udp_hdr->dgram_cksum = get_udptcp_checksum(m, outer_l3_hdr,
+ info->l2_len + info->outer_l3_len,
+ info->outer_ethertype);
}
return ol_flags;
@@ -957,7 +967,7 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
/* process checksums of inner headers first */
tx_ol_flags |= process_inner_cksums(l3_hdr, &info,
- tx_offloads);
+ tx_offloads, m);
/* Then process outer headers if any. Note that the software
* checksum will be wrong if one of the inner checksums is
@@ -965,7 +975,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
if (info.is_tunnel == 1) {
tx_ol_flags |= process_outer_cksums(outer_l3_hdr, &info,
tx_offloads,
- !!(tx_ol_flags & RTE_MBUF_F_TX_TCP_SEG));
+ !!(tx_ol_flags & RTE_MBUF_F_TX_TCP_SEG),
+ m);
}
/* step 3: fill the mbuf meta data (flags and header lengths) */
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 785fd22001..3c57555535 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -63,6 +63,8 @@ New Features
- ``rte_ipv4_udptcp_cksum_mbuf_verify()``
- ``rte_ipv6_udptcp_cksum_mbuf()``
- ``rte_ipv6_udptcp_cksum_mbuf_verify()``
+ * Called ``rte_ipv4/6_udptcp_cksum_mbuf()`` functions in testpmd csum mode
+ to support software UDP/TCP checksum over multiple segments.
Removed Items
-------------
--
2.25.1
next prev parent reply other threads:[~2022-01-24 12:40 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 5:13 [dpdk-dev] [PATCH] app/testpmd: fix l4 sw " Xiaoyun Li
2021-10-15 8:09 ` David Marchand
2021-10-18 2:02 ` Li, Xiaoyun
2021-10-18 2:16 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2021-10-18 3:00 ` [dpdk-dev] [PATCH] " Stephen Hemminger
2021-10-18 3:16 ` Li, Xiaoyun
2021-10-18 4:40 ` Li, Xiaoyun
2021-10-18 10:15 ` Ananyev, Konstantin
2021-10-19 1:54 ` Li, Xiaoyun
2021-10-20 10:12 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
2021-10-27 10:48 ` Ferruh Yigit
2021-10-27 11:29 ` Morten Brørup
2021-10-29 8:29 ` Olivier Matz
2021-12-03 11:31 ` Li, Xiaoyun
2021-12-03 11:38 ` [PATCH v4 0/2] Add functions to calculate UDP/TCP cksum in mbuf Xiaoyun Li
2021-12-03 11:38 ` [PATCH v4 1/2] net: add " Xiaoyun Li
2021-12-15 11:33 ` Singh, Aman Deep
2022-01-04 15:18 ` Li, Xiaoyun
2022-01-04 15:40 ` Li, Xiaoyun
2022-01-06 12:56 ` Singh, Aman Deep
2021-12-03 11:38 ` [PATCH v4 2/2] testpmd: fix l4 sw csum over multi segments Xiaoyun Li
2021-12-08 6:10 ` [PATCH v4 0/2] Add functions to calculate UDP/TCP cksum in mbuf Pai G, Sunil
2022-01-06 16:03 ` [PATCH v5 " Xiaoyun Li
2022-01-06 16:03 ` [PATCH v5 1/2] net: add " Xiaoyun Li
2022-01-21 15:16 ` Ferruh Yigit
2022-01-06 16:03 ` [PATCH v5 2/2] testpmd: fix l4 sw csum over multi segments Xiaoyun Li
2022-01-21 15:16 ` Ferruh Yigit
2022-01-24 9:43 ` Li, Xiaoyun
2022-01-24 10:16 ` Ferruh Yigit
2022-01-21 17:09 ` Kevin Traynor
2022-01-24 9:16 ` Ferruh Yigit
2022-01-24 10:30 ` Kevin Traynor
2022-01-24 11:02 ` Ferruh Yigit
2022-01-24 12:28 ` [PATCH v6 0/2] Add functions to calculate UDP/TCP cksum in mbuf Xiaoyun Li
2022-01-24 12:28 ` [PATCH v6 1/2] net: add " Xiaoyun Li
2022-02-03 12:41 ` Ferruh Yigit
2022-01-24 12:28 ` Xiaoyun Li [this message]
2022-02-04 13:12 ` [PATCH v6 2/2] app/testpmd: enable L4 SW csum over multi segments Ferruh Yigit
2022-02-04 13:12 ` [PATCH v6 0/2] Add functions to calculate UDP/TCP cksum in mbuf Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220124122857.1104668-3-xiaoyun.li@intel.com \
--to=xiaoyun.li@intel.com \
--cc=Aman.Deep.Singh@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktraynor@redhat.com \
--cc=mb@smartsharesystems.com \
--cc=olivier.matz@6wind.com \
--cc=stephen@networkplumber.org \
--cc=sunil.pai.g@intel.com \
--cc=vladimir.medvedkin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).