DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Mattias Rönnblom" <mattias.ronnblom@ericsson.com>
To: <dev@dpdk.org>
Cc: "Thomas Monjalon" <thomas@monjalon.net>,
	"David Marchand" <david.marchand@redhat.com>,
	onar.olsen@ericsson.com, Honnappa.Nagarahalli@arm.com,
	nd@arm.com, konstantin.ananyev@intel.com,
	mb@smartsharesystems.com, stephen@networkplumber.org,
	"Mattias Rönnblom" <mattias.ronnblom@ericsson.com>,
	"Ola Liljedahl" <ola.liljedahl@arm.com>
Subject: [PATCH v3] eal: add seqlock
Date: Fri, 1 Apr 2022 17:07:49 +0200	[thread overview]
Message-ID: <20220401150749.136921-1-mattias.ronnblom@ericsson.com> (raw)
In-Reply-To: <a0ec9df7-1af7-708e-fef0-49cb4e147a2e@ericsson.com>

A sequence lock (seqlock) is synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, especially for
data structures shared across many cores and which are updated with
relatively infrequently.

A seqlock permits multiple parallel readers. The variant of seqlock
implemented in this patch supports multiple writers as well. A
spinlock is used for writer-writer serialization.

To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).

One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger what the native atomic
machine instructions allow for.

DPDK seqlocks are not preemption safe on the writer side. A thread
preemption affects performance, not correctness.

A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.

A reader will
  1. Load the sequence number (sn).
  2. Load, in arbitrary order, the seqlock-protected data.
  3. Load the sn again.
  4. Check if the first and second sn are equal, and even numbered.
     If they are not, discard the loaded data, and restart from 1.

The first three steps need to be ordered using suitable memory fences.

A writer will
  1. Take the spinlock, to serialize writer access.
  2. Load the sn.
  3. Store the original sn + 1 as the new sn.
  4. Perform load and stores to the seqlock-protected data.
  5. Store the original sn + 2 as the new sn.
  6. Release the spinlock.

Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.

The sn loads and stores must be atomic, but the data loads and stores
need not be.

The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.

For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock

PATCH v3:
  * Renamed both read and write-side critical section begin/end functions
    to better match rwlock naming, per Ola Liljedahl's suggestion.
  * Added 'extern "C"' guards for C++ compatibility.
  * Refer to the main lcore as the main, and not the master.

PATCH v2:
  * Skip instead of fail unit test in case too few lcores are available.
  * Use main lcore for testing, reducing the minimum number of lcores
    required to run the unit tests to four.
  * Consistently refer to sn field as the "sequence number" in the
    documentation.
  * Fixed spelling mistakes in documentation.

Updates since RFC:
  * Added API documentation.
  * Added link to Wikipedia article in the commit message.
  * Changed seqlock sequence number field from uint64_t (which was
    overkill) to uint32_t. The sn type needs to be sufficiently large
    to assure no reader will read a sn, access the data, and then read
    the same sn, but the sn has been updated to many times during the
    read, so it has wrapped.
  * Added RTE_SEQLOCK_INITIALIZER macro for static initialization.
  * Removed the rte_seqlock struct + separate rte_seqlock_t typedef
    with an anonymous struct typedef:ed to rte_seqlock_t.

Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
---
 app/test/meson.build          |   2 +
 app/test/test_seqlock.c       | 202 +++++++++++++++++++++++
 lib/eal/common/meson.build    |   1 +
 lib/eal/common/rte_seqlock.c  |  12 ++
 lib/eal/include/meson.build   |   1 +
 lib/eal/include/rte_seqlock.h | 302 ++++++++++++++++++++++++++++++++++
 lib/eal/version.map           |   3 +
 7 files changed, 523 insertions(+)
 create mode 100644 app/test/test_seqlock.c
 create mode 100644 lib/eal/common/rte_seqlock.c
 create mode 100644 lib/eal/include/rte_seqlock.h

diff --git a/app/test/meson.build b/app/test/meson.build
index 5fc1dd1b7b..5e418e8766 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -125,6 +125,7 @@ test_sources = files(
         'test_rwlock.c',
         'test_sched.c',
         'test_security.c',
+        'test_seqlock.c',
         'test_service_cores.c',
         'test_spinlock.c',
         'test_stack.c',
@@ -214,6 +215,7 @@ fast_tests = [
         ['rwlock_rde_wro_autotest', true],
         ['sched_autotest', true],
         ['security_autotest', false],
+        ['seqlock_autotest', true],
         ['spinlock_autotest', true],
         ['stack_autotest', false],
         ['stack_lf_autotest', false],
diff --git a/app/test/test_seqlock.c b/app/test/test_seqlock.c
new file mode 100644
index 0000000000..54fadf8025
--- /dev/null
+++ b/app/test/test_seqlock.c
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Ericsson AB
+ */
+
+#include <rte_seqlock.h>
+
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_random.h>
+
+#include <inttypes.h>
+
+#include "test.h"
+
+struct data {
+	rte_seqlock_t lock;
+
+	uint64_t a;
+	uint64_t b __rte_cache_aligned;
+	uint64_t c __rte_cache_aligned;
+} __rte_cache_aligned;
+
+struct reader {
+	struct data *data;
+	uint8_t stop;
+};
+
+#define WRITER_RUNTIME (2.0) /* s */
+
+#define WRITER_MAX_DELAY (100) /* us */
+
+#define INTERRUPTED_WRITER_FREQUENCY (1000)
+#define WRITER_INTERRUPT_TIME (1) /* us */
+
+static int
+writer_run(void *arg)
+{
+	struct data *data = arg;
+	uint64_t deadline;
+
+	deadline = rte_get_timer_cycles() +
+		WRITER_RUNTIME * rte_get_timer_hz();
+
+	while (rte_get_timer_cycles() < deadline) {
+		bool interrupted;
+		uint64_t new_value;
+		unsigned int delay;
+
+		new_value = rte_rand();
+
+		interrupted = rte_rand_max(INTERRUPTED_WRITER_FREQUENCY) == 0;
+
+		rte_seqlock_write_lock(&data->lock);
+
+		data->c = new_value;
+
+		/* These compiler barriers (both on the test reader
+		 * and the test writer side) are here to ensure that
+		 * loads/stores *usually* happen in test program order
+		 * (always on a TSO machine). They are arrange in such
+		 * a way that the writer stores in a different order
+		 * than the reader loads, to emulate an arbitrary
+		 * order. A real application using a seqlock does not
+		 * require any compiler barriers.
+		 */
+		rte_compiler_barrier();
+		data->b = new_value;
+
+		if (interrupted)
+			rte_delay_us_block(WRITER_INTERRUPT_TIME);
+
+		rte_compiler_barrier();
+		data->a = new_value;
+
+		rte_seqlock_write_unlock(&data->lock);
+
+		delay = rte_rand_max(WRITER_MAX_DELAY);
+
+		rte_delay_us_block(delay);
+	}
+
+	return 0;
+}
+
+#define INTERRUPTED_READER_FREQUENCY (1000)
+#define READER_INTERRUPT_TIME (1000) /* us */
+
+static int
+reader_run(void *arg)
+{
+	struct reader *r = arg;
+	int rc = 0;
+
+	while (__atomic_load_n(&r->stop, __ATOMIC_RELAXED) == 0 && rc == 0) {
+		struct data *data = r->data;
+		bool interrupted;
+		uint64_t a;
+		uint64_t b;
+		uint64_t c;
+		uint32_t sn;
+
+		interrupted = rte_rand_max(INTERRUPTED_READER_FREQUENCY) == 0;
+
+		sn = rte_seqlock_read_lock(&data->lock);
+
+		do {
+			a = data->a;
+			/* See writer_run() for an explanation why
+			 * these barriers are here.
+			 */
+			rte_compiler_barrier();
+
+			if (interrupted)
+				rte_delay_us_block(READER_INTERRUPT_TIME);
+
+			c = data->c;
+
+			rte_compiler_barrier();
+			b = data->b;
+
+		} while (!rte_seqlock_read_tryunlock(&data->lock, &sn));
+
+		if (a != b || b != c) {
+			printf("Reader observed inconsistent data values "
+			       "%" PRIu64 " %" PRIu64 " %" PRIu64 "\n",
+			       a, b, c);
+			rc = -1;
+		}
+	}
+
+	return rc;
+}
+
+static void
+reader_stop(struct reader *reader)
+{
+	__atomic_store_n(&reader->stop, 1, __ATOMIC_RELAXED);
+}
+
+#define NUM_WRITERS (2) /* main lcore + one worker */
+#define MIN_NUM_READERS (2)
+#define MAX_READERS (RTE_MAX_LCORE - NUM_WRITERS - 1)
+#define MIN_LCORE_COUNT (NUM_WRITERS + MIN_NUM_READERS)
+
+/* Only a compile-time test */
+static rte_seqlock_t __rte_unused static_init_lock = RTE_SEQLOCK_INITIALIZER;
+
+static int
+test_seqlock(void)
+{
+	struct reader readers[MAX_READERS];
+	unsigned int num_readers;
+	unsigned int num_lcores;
+	unsigned int i;
+	unsigned int lcore_id;
+	unsigned int reader_lcore_ids[MAX_READERS];
+	unsigned int worker_writer_lcore_id = 0;
+	int rc = 0;
+
+	num_lcores = rte_lcore_count();
+
+	if (num_lcores < MIN_LCORE_COUNT) {
+		printf("Too few cores to run test. Skipping.\n");
+		return 0;
+	}
+
+	num_readers = num_lcores - NUM_WRITERS;
+
+	struct data *data = rte_zmalloc(NULL, sizeof(struct data), 0);
+
+	i = 0;
+	RTE_LCORE_FOREACH_WORKER(lcore_id) {
+		if (i == 0) {
+			rte_eal_remote_launch(writer_run, data, lcore_id);
+			worker_writer_lcore_id = lcore_id;
+		} else {
+			unsigned int reader_idx = i - 1;
+			struct reader *reader = &readers[reader_idx];
+
+			reader->data = data;
+			reader->stop = 0;
+
+			rte_eal_remote_launch(reader_run, reader, lcore_id);
+			reader_lcore_ids[reader_idx] = lcore_id;
+		}
+		i++;
+	}
+
+	if (writer_run(data) != 0 ||
+	    rte_eal_wait_lcore(worker_writer_lcore_id) != 0)
+		rc = -1;
+
+	for (i = 0; i < num_readers; i++) {
+		reader_stop(&readers[i]);
+		if (rte_eal_wait_lcore(reader_lcore_ids[i]) != 0)
+			rc = -1;
+	}
+
+	return rc;
+}
+
+REGISTER_TEST_COMMAND(seqlock_autotest, test_seqlock);
diff --git a/lib/eal/common/meson.build b/lib/eal/common/meson.build
index 917758cc65..a41343bfed 100644
--- a/lib/eal/common/meson.build
+++ b/lib/eal/common/meson.build
@@ -35,6 +35,7 @@ sources += files(
         'rte_malloc.c',
         'rte_random.c',
         'rte_reciprocal.c',
+	'rte_seqlock.c',
         'rte_service.c',
         'rte_version.c',
 )
diff --git a/lib/eal/common/rte_seqlock.c b/lib/eal/common/rte_seqlock.c
new file mode 100644
index 0000000000..d4fe648799
--- /dev/null
+++ b/lib/eal/common/rte_seqlock.c
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Ericsson AB
+ */
+
+#include <rte_seqlock.h>
+
+void
+rte_seqlock_init(rte_seqlock_t *seqlock)
+{
+	seqlock->sn = 0;
+	rte_spinlock_init(&seqlock->lock);
+}
diff --git a/lib/eal/include/meson.build b/lib/eal/include/meson.build
index 9700494816..48df5f1a21 100644
--- a/lib/eal/include/meson.build
+++ b/lib/eal/include/meson.build
@@ -36,6 +36,7 @@ headers += files(
         'rte_per_lcore.h',
         'rte_random.h',
         'rte_reciprocal.h',
+        'rte_seqlock.h',
         'rte_service.h',
         'rte_service_component.h',
         'rte_string_fns.h',
diff --git a/lib/eal/include/rte_seqlock.h b/lib/eal/include/rte_seqlock.h
new file mode 100644
index 0000000000..44eacd66e8
--- /dev/null
+++ b/lib/eal/include/rte_seqlock.h
@@ -0,0 +1,302 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Ericsson AB
+ */
+
+#ifndef _RTE_SEQLOCK_H_
+#define _RTE_SEQLOCK_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file
+ * RTE Seqlock
+ *
+ * A sequence lock (seqlock) is a synchronization primitive allowing
+ * multiple, parallel, readers to efficiently and safely (i.e., in a
+ * data-race free manner) access the lock-protected data. The RTE
+ * seqlock permits multiple writers as well. A spinlock is used to
+ * writer-writer synchronization.
+ *
+ * A reader never blocks a writer. Very high frequency writes may
+ * prevent readers from making progress.
+ *
+ * A seqlock is not preemption-safe on the writer side. If a writer is
+ * preempted, it may block readers until the writer thread is again
+ * allowed to execute. Heavy computations should be kept out of the
+ * writer-side critical section, to avoid delaying readers.
+ *
+ * Seqlocks are useful for data which are read by many cores, at a
+ * high frequency, and relatively infrequently written to.
+ *
+ * One way to think about seqlocks is that they provide means to
+ * perform atomic operations on objects larger than what the native
+ * machine instructions allow for.
+ *
+ * To avoid resource reclamation issues, the data protected by a
+ * seqlock should typically be kept self-contained (e.g., no pointers
+ * to mutable, dynamically allocated data).
+ *
+ * Example usage:
+ * @code{.c}
+ * #define MAX_Y_LEN (16)
+ * // Application-defined example data structure, protected by a seqlock.
+ * struct config {
+ *         rte_seqlock_t lock;
+ *         int param_x;
+ *         char param_y[MAX_Y_LEN];
+ * };
+ *
+ * // Accessor function for reading config fields.
+ * void
+ * config_read(const struct config *config, int *param_x, char *param_y)
+ * {
+ *         // Temporary variables, just to improve readability.
+ *         int tentative_x;
+ *         char tentative_y[MAX_Y_LEN];
+ *         uint32_t sn;
+ *
+ *         sn = rte_seqlock_read_lock(&config->lock);
+ *         do {
+ *                 // Loads may be atomic or non-atomic, as in this example.
+ *                 tentative_x = config->param_x;
+ *                 strcpy(tentative_y, config->param_y);
+ *         } while (!rte_seqlock_read_tryunlock(&config->lock, &sn));
+ *         // An application could skip retrying, and try again later, if
+ *         // progress is possible without the data.
+ *
+ *         *param_x = tentative_x;
+ *         strcpy(param_y, tentative_y);
+ * }
+ *
+ * // Accessor function for writing config fields.
+ * void
+ * config_update(struct config *config, int param_x, const char *param_y)
+ * {
+ *         rte_seqlock_write_lock(&config->lock);
+ *         // Stores may be atomic or non-atomic, as in this example.
+ *         config->param_x = param_x;
+ *         strcpy(config->param_y, param_y);
+ *         rte_seqlock_write_unlock(&config->lock);
+ * }
+ * @endcode
+ *
+ * @see
+ * https://en.wikipedia.org/wiki/Seqlock.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_spinlock.h>
+
+/**
+ * The RTE seqlock type.
+ */
+typedef struct {
+	uint32_t sn; /**< A sequence number for the protected data. */
+	rte_spinlock_t lock; /**< Spinlock used to serialize writers.  */
+} rte_seqlock_t;
+
+/**
+ * A static seqlock initializer.
+ */
+#define RTE_SEQLOCK_INITIALIZER { 0, RTE_SPINLOCK_INITIALIZER }
+
+/**
+ * Initialize the seqlock.
+ *
+ * This function initializes the seqlock, and leaves the writer-side
+ * spinlock unlocked.
+ *
+ * @param seqlock
+ *   A pointer to the seqlock.
+ */
+__rte_experimental
+void
+rte_seqlock_init(rte_seqlock_t *seqlock);
+
+/**
+ * Begin a read-side critical section.
+ *
+ * A call to this function marks the beginning of a read-side critical
+ * section, for @p seqlock.
+ *
+ * rte_seqlock_read_lock() returns a sequence number, which is later
+ * used in rte_seqlock_read_tryunlock() to check if the protected data
+ * underwent any modifications during the read transaction.
+ *
+ * After (in program order) rte_seqlock_read_lock() has been called,
+ * the calling thread reads the protected data, for later use. The
+ * protected data read *must* be copied (either in pristine form, or
+ * in the form of some derivative), since the caller may only read the
+ * data from within the read-side critical section (i.e., after
+ * rte_seqlock_read_lock() and before rte_seqlock_read_tryunlock()),
+ * but must not act upon the retrieved data while in the critical
+ * section, since it does not yet know if it is consistent.
+ *
+ * The protected data may be read using atomic and/or non-atomic
+ * operations.
+ *
+ * After (in program order) all required data loads have been
+ * performed, rte_seqlock_read_tryunlock() should be called, marking
+ * the end of the read-side critical section.
+ *
+ * If rte_seqlock_read_tryunlock() returns true, the data was read
+ * atomically and the copied data is consistent.
+ *
+ * If rte_seqlock_read_tryunlock() returns false, the just-read data
+ * is inconsistent and should be discarded. The caller has the option
+ * to either re-read the data and call rte_seqlock_read_tryunlock()
+ * again, or to restart the whole procedure (i.e., from
+ * rte_seqlock_read_lock()) at some later time.
+ *
+ * @param seqlock
+ *   A pointer to the seqlock.
+ * @return
+ *   The seqlock sequence number for this critical section, to
+ *   later be passed to rte_seqlock_read_tryunlock().
+ *
+ * @see rte_seqlock_read_tryunlock()
+ */
+__rte_experimental
+static inline uint32_t
+rte_seqlock_read_lock(const rte_seqlock_t *seqlock)
+{
+	/* __ATOMIC_ACQUIRE to prevent loads after (in program order)
+	 * from happening before the sn load. Synchronizes-with the
+	 * store release in rte_seqlock_write_unlock().
+	 */
+	return __atomic_load_n(&seqlock->sn, __ATOMIC_ACQUIRE);
+}
+
+/**
+ * End a read-side critical section.
+ *
+ * A call to this function marks the end of a read-side critical
+ * section, for @p seqlock. The application must supply the sequence
+ * number produced by the corresponding rte_seqlock_read_lock() (or,
+ * in case of a retry, the rte_seqlock_tryunlock()) call.
+ *
+ * After this function has been called, the caller should not access
+ * the protected data.
+ *
+ * In case this function returns true, the just-read data was
+ * consistent and the set of atomic and non-atomic load operations
+ * performed between rte_seqlock_read_lock() and
+ * rte_seqlock_read_tryunlock() were atomic, as a whole.
+ *
+ * In case rte_seqlock_read_tryunlock() returns false, the data was
+ * modified as it was being read and may be inconsistent, and thus
+ * should be discarded. The @p begin_sn is updated with the
+ * now-current sequence number.
+ *
+ * @param seqlock
+ *   A pointer to the seqlock.
+ * @param begin_sn
+ *   The seqlock sequence number returned by
+ *   rte_seqlock_read_lock() (potentially updated in subsequent
+ *   rte_seqlock_read_tryunlock() calls) for this critical section.
+ * @return
+ *   true or false, if the just-read seqlock-protected data was consistent
+ *   or inconsistent, respectively, at the time it was read.
+ *
+ * @see rte_seqlock_read_lock()
+ */
+__rte_experimental
+static inline bool
+rte_seqlock_read_tryunlock(const rte_seqlock_t *seqlock, uint32_t *begin_sn)
+{
+	uint32_t end_sn;
+
+	/* make sure the data loads happens before the sn load */
+	rte_atomic_thread_fence(__ATOMIC_ACQUIRE);
+
+	end_sn = __atomic_load_n(&seqlock->sn, __ATOMIC_RELAXED);
+
+	if (unlikely(end_sn & 1 || *begin_sn != end_sn)) {
+		*begin_sn = end_sn;
+		return false;
+	}
+
+	return true;
+}
+
+/**
+ * Begin a write-side critical section.
+ *
+ * A call to this function acquires the write lock associated @p
+ * seqlock, and marks the beginning of a write-side critical section.
+ *
+ * After having called this function, the caller may go on to modify
+ * (both read and write) the protected data, in an atomic or
+ * non-atomic manner.
+ *
+ * After the necessary updates have been performed, the application
+ * calls rte_seqlock_write_unlock().
+ *
+ * This function is not preemption-safe in the sense that preemption
+ * of the calling thread may block reader progress until the writer
+ * thread is rescheduled.
+ *
+ * Unlike rte_seqlock_read_lock(), each call made to
+ * rte_seqlock_write_lock() must be matched with an unlock call.
+ *
+ * @param seqlock
+ *   A pointer to the seqlock.
+ *
+ * @see rte_seqlock_write_unlock()
+ */
+__rte_experimental
+static inline void
+rte_seqlock_write_lock(rte_seqlock_t *seqlock)
+{
+	uint32_t sn;
+
+	/* to synchronize with other writers */
+	rte_spinlock_lock(&seqlock->lock);
+
+	sn = seqlock->sn + 1;
+
+	__atomic_store_n(&seqlock->sn, sn, __ATOMIC_RELAXED);
+
+	/* __ATOMIC_RELEASE to prevent stores after (in program order)
+	 * from happening before the sn store.
+	 */
+	rte_atomic_thread_fence(__ATOMIC_RELEASE);
+}
+
+/**
+ * End a write-side critical section.
+ *
+ * A call to this function marks the end of the write-side critical
+ * section, for @p seqlock. After this call has been made, the protected
+ * data may no longer be modified.
+ *
+ * @param seqlock
+ *   A pointer to the seqlock.
+ *
+ * @see rte_seqlock_write_lock()
+ */
+__rte_experimental
+static inline void
+rte_seqlock_write_unlock(rte_seqlock_t *seqlock)
+{
+	uint32_t sn;
+
+	sn = seqlock->sn + 1;
+
+	/* synchronizes-with the load acquire in rte_seqlock_read_lock() */
+	__atomic_store_n(&seqlock->sn, sn, __ATOMIC_RELEASE);
+
+	rte_spinlock_unlock(&seqlock->lock);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* _RTE_SEQLOCK_H_ */
diff --git a/lib/eal/version.map b/lib/eal/version.map
index b53eeb30d7..4a9d0ed899 100644
--- a/lib/eal/version.map
+++ b/lib/eal/version.map
@@ -420,6 +420,9 @@ EXPERIMENTAL {
 	rte_intr_instance_free;
 	rte_intr_type_get;
 	rte_intr_type_set;
+
+	# added in 22.07
+	rte_seqlock_init;
 };
 
 INTERNAL {
-- 
2.25.1


  reply	other threads:[~2022-04-01 15:08 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-22 16:10 DPDK seqlock Mattias Rönnblom
2022-03-22 16:46 ` Ananyev, Konstantin
2022-03-24  4:52   ` Honnappa Nagarahalli
2022-03-24  5:06     ` Stephen Hemminger
2022-03-24 11:34     ` Mattias Rönnblom
2022-03-25 20:24       ` [RFC] eal: add seqlock Mattias Rönnblom
2022-03-25 21:10         ` Stephen Hemminger
2022-03-26 14:57           ` Mattias Rönnblom
2022-03-27 14:49         ` Ananyev, Konstantin
2022-03-27 17:42           ` Mattias Rönnblom
2022-03-28 10:53             ` Ananyev, Konstantin
2022-03-28 14:06               ` Ola Liljedahl
2022-03-29  8:32                 ` Mattias Rönnblom
2022-03-29 13:20                   ` Ananyev, Konstantin
2022-03-30 10:07                     ` [PATCH] " Mattias Rönnblom
2022-03-30 10:50                       ` Morten Brørup
2022-03-30 11:24                         ` Tyler Retzlaff
2022-03-30 11:25                         ` Mattias Rönnblom
2022-03-30 14:26                         ` [PATCH v2] " Mattias Rönnblom
2022-03-31  7:46                           ` Mattias Rönnblom
2022-03-31  9:04                             ` Ola Liljedahl
2022-03-31  9:25                               ` Morten Brørup
2022-03-31  9:38                                 ` Ola Liljedahl
2022-03-31 10:03                                   ` Morten Brørup
2022-03-31 11:44                                     ` Ola Liljedahl
2022-03-31 11:50                                       ` Morten Brørup
2022-03-31 14:02                                       ` Mattias Rönnblom
2022-04-01 15:07                                         ` Mattias Rönnblom [this message]
2022-04-02  0:21                                           ` [PATCH v3] " Honnappa Nagarahalli
2022-04-02 11:01                                             ` Morten Brørup
2022-04-02 19:38                                               ` Honnappa Nagarahalli
2022-04-10 13:51                                                 ` [RFC 1/3] eal: add macro to warn for unused function return values Mattias Rönnblom
2022-04-10 13:51                                                   ` [RFC 2/3] eal: emit warning for unused trylock return value Mattias Rönnblom
2022-04-10 13:51                                                   ` [RFC 3/3] examples/bond: fix invalid use of trylock Mattias Rönnblom
2022-04-11  1:01                                                     ` Min Hu (Connor)
2022-04-11 14:32                                                       ` Mattias Rönnblom
2022-04-11 11:25                                                     ` David Marchand
2022-04-11 14:33                                                       ` Mattias Rönnblom
2022-04-10 18:02                                                   ` [RFC 1/3] eal: add macro to warn for unused function return values Stephen Hemminger
2022-04-10 18:50                                                     ` Mattias Rönnblom
2022-04-11  7:17                                                   ` Morten Brørup
2022-04-11 14:29                                                     ` Mattias Rönnblom
2022-04-11  9:16                                                   ` Bruce Richardson
2022-04-11 14:27                                                     ` Mattias Rönnblom
2022-04-11 15:15                                                     ` [PATCH " Mattias Rönnblom
2022-04-11 15:15                                                       ` [PATCH 2/3] eal: emit warning for unused trylock return value Mattias Rönnblom
2022-04-11 15:29                                                         ` Morten Brørup
2022-04-11 15:15                                                       ` [PATCH 3/3] examples/bond: fix invalid use of trylock Mattias Rönnblom
2022-04-14 12:06                                                         ` David Marchand
2022-04-11 15:25                                                       ` [PATCH 1/3] eal: add macro to warn for unused function return values Morten Brørup
2022-04-11 18:24                                                     ` [RFC " Tyler Retzlaff
2022-04-03  6:10                                             ` [PATCH v3] eal: add seqlock Mattias Rönnblom
2022-04-03 17:27                                               ` Honnappa Nagarahalli
2022-04-03 18:37                                                 ` Ola Liljedahl
2022-04-04 21:56                                                   ` Honnappa Nagarahalli
2022-04-03  6:33                                             ` Mattias Rönnblom
2022-04-03 17:37                                               ` Honnappa Nagarahalli
2022-04-08 13:45                                                 ` Mattias Rönnblom
2022-04-02 18:15                                           ` Ola Liljedahl
2022-04-02 19:31                                             ` Honnappa Nagarahalli
2022-04-02 20:36                                               ` Morten Brørup
2022-04-02 22:01                                                 ` Honnappa Nagarahalli
2022-04-03 18:11                                               ` Ola Liljedahl
2022-04-03  6:51                                             ` Mattias Rönnblom
2022-03-31 13:51                                 ` [PATCH v2] " Mattias Rönnblom
2022-04-02  0:54                                   ` Stephen Hemminger
2022-04-02 10:25                                     ` Morten Brørup
2022-04-02 17:43                                       ` Ola Liljedahl
2022-03-31 13:38                               ` Mattias Rönnblom
2022-03-31 14:53                                 ` Ola Liljedahl
2022-04-02  0:52                                   ` Stephen Hemminger
2022-04-03  6:23                                     ` Mattias Rönnblom
2022-04-02  0:50                           ` Stephen Hemminger
2022-04-02 17:54                             ` Ola Liljedahl
2022-04-02 19:37                               ` Honnappa Nagarahalli
2022-04-05 20:16                           ` Stephen Hemminger
2022-04-08 13:50                             ` Mattias Rönnblom
2022-04-08 14:24                               ` [PATCH v4] " Mattias Rönnblom
2022-04-08 15:17                                 ` Stephen Hemminger
2022-04-08 16:24                                   ` Mattias Rönnblom
2022-04-08 15:19                                 ` Stephen Hemminger
2022-04-08 16:37                                   ` Mattias Rönnblom
2022-04-08 16:48                                 ` Mattias Rönnblom
2022-04-12 17:27                                 ` Ananyev, Konstantin
2022-04-28 10:28                                 ` David Marchand
2022-05-01 13:46                                   ` Mattias Rönnblom
2022-05-01 14:03                                     ` [PATCH v5] " Mattias Rönnblom
2022-05-01 14:22                                       ` Mattias Rönnblom
2022-05-02  6:47                                         ` David Marchand
2022-05-01 20:17                                       ` Stephen Hemminger
2022-05-02  4:51                                         ` Mattias Rönnblom
2022-05-06  1:26                                       ` fengchengwen
2022-05-06  1:33                                         ` Honnappa Nagarahalli
2022-05-06  4:17                                           ` fengchengwen
2022-05-06  5:19                                             ` Honnappa Nagarahalli
2022-05-06  7:03                                               ` fengchengwen
2022-05-08 11:56                                         ` Mattias Rönnblom
2022-05-08 12:12                                           ` [PATCH v6] " Mattias Rönnblom
2022-05-08 16:10                                             ` Stephen Hemminger
2022-05-08 19:40                                               ` Mattias Rönnblom
2022-05-09  3:48                                                 ` Stephen Hemminger
2022-05-09  6:26                                                   ` Morten Brørup
2022-05-13  6:27                                                   ` Mattias Rönnblom
2022-03-23 12:04 ` DPDK seqlock Morten Brørup

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220401150749.136921-1-mattias.ronnblom@ericsson.com \
    --to=mattias.ronnblom@ericsson.com \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@intel.com \
    --cc=mb@smartsharesystems.com \
    --cc=nd@arm.com \
    --cc=ola.liljedahl@arm.com \
    --cc=onar.olsen@ericsson.com \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).