DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tomasz Duszynski <tduszynski@marvell.com>
To: <dev@dpdk.org>, Jakub Palider <jpalider@marvell.com>,
	Tomasz Duszynski <tduszynski@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	"Kiran Kumar K" <kirankumark@marvell.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	Satha Rao <skoteshwar@marvell.com>, Ray Kinsella <mdr@ashroe.eu>
Cc: <thomas@monjalon.net>, <jerinj@marvell.com>
Subject: [PATCH 05/10] raw/cnxk_bphy: support switching from eCPRI to CPRI
Date: Sat, 4 Jun 2022 18:26:46 +0200	[thread overview]
Message-ID: <20220604162651.3503338-6-tduszynski@marvell.com> (raw)
In-Reply-To: <20220604162651.3503338-1-tduszynski@marvell.com>

Add support for switching from ethernet (eCPRI) to CPRI mode.

Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
---
 doc/guides/rawdevs/cnxk_bphy.rst        | 11 +++++++
 drivers/common/cnxk/roc_bphy_cgx.c      | 33 ++++++++++++++++++++
 drivers/common/cnxk/roc_bphy_cgx.h      | 14 +++++++--
 drivers/common/cnxk/roc_bphy_cgx_priv.h |  8 +++++
 drivers/common/cnxk/roc_model.h         | 24 +++++++++++++++
 drivers/common/cnxk/version.map         |  1 +
 drivers/raw/cnxk_bphy/cnxk_bphy_cgx.c   | 13 ++++++++
 drivers/raw/cnxk_bphy/rte_pmd_bphy.h    | 40 +++++++++++++++++++++++++
 8 files changed, 141 insertions(+), 3 deletions(-)

diff --git a/doc/guides/rawdevs/cnxk_bphy.rst b/doc/guides/rawdevs/cnxk_bphy.rst
index 522390bf1b..7f55e9eac6 100644
--- a/doc/guides/rawdevs/cnxk_bphy.rst
+++ b/doc/guides/rawdevs/cnxk_bphy.rst
@@ -100,6 +100,17 @@ Message must have type set to ``CNXK_BPHY_CGX_MSG_TYPE_START_RXTX`` or
 ``CNXK_BPHY_CGX_MSG_TYPE_STOP_RXTX``. Former will enable traffic while the latter will
 do the opposite.
 
+Change mode from eCPRI to CPRI
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Message is used to change operating mode from eCPRI to CPRI along with other
+settings.
+
+Message must have type set to ``CNXK_BPHY_CGX_MSG_TYPE_CPRI_MODE_CHANGE``.
+Prior to sending actual message payload i.e
+``struct cnxk_bphy_cgx_msg_cpri_mode_change`` needs to be filled with relevant
+information.
+
 BPHY PMD
 --------
 
diff --git a/drivers/common/cnxk/roc_bphy_cgx.c b/drivers/common/cnxk/roc_bphy_cgx.c
index a0a0d22f85..223bd313fa 100644
--- a/drivers/common/cnxk/roc_bphy_cgx.c
+++ b/drivers/common/cnxk/roc_bphy_cgx.c
@@ -455,3 +455,36 @@ roc_bphy_cgx_fec_supported_get(struct roc_bphy_cgx *roc_cgx, unsigned int lmac,
 
 	return 0;
 }
+
+int
+roc_bphy_cgx_cpri_mode_change(struct roc_bphy_cgx *roc_cgx, unsigned int lmac,
+			      struct roc_bphy_cgx_cpri_mode_change *mode)
+{
+	uint64_t scr1, scr0;
+
+	if (!(roc_model_is_cnf95xxn_a0() ||
+	      roc_model_is_cnf95xxn_a1() ||
+	      roc_model_is_cnf95xxn_b0()))
+		return -ENOTSUP;
+
+	if (!roc_cgx)
+		return -EINVAL;
+
+	if (!roc_bphy_cgx_lmac_exists(roc_cgx, lmac))
+		return -ENODEV;
+
+	if (!mode)
+		return -EINVAL;
+
+	scr1 = FIELD_PREP(SCR1_ETH_CMD_ID, ETH_CMD_CPRI_MODE_CHANGE) |
+	       FIELD_PREP(SCR1_CPRI_MODE_CHANGE_ARGS_GSERC_IDX,
+			  mode->gserc_idx) |
+	       FIELD_PREP(SCR1_CPRI_MODE_CHANGE_ARGS_LANE_IDX, mode->lane_idx) |
+	       FIELD_PREP(SCR1_CPRI_MODE_CHANGE_ARGS_RATE, mode->rate) |
+	       FIELD_PREP(SCR1_CPRI_MODE_CHANGE_ARGS_DISABLE_LEQ,
+			  mode->disable_leq) |
+	       FIELD_PREP(SCR1_CPRI_MODE_CHANGE_ARGS_DISABLE_DFE,
+			  mode->disable_dfe);
+
+	return roc_bphy_cgx_intf_req(roc_cgx, lmac, scr1, &scr0);
+}
diff --git a/drivers/common/cnxk/roc_bphy_cgx.h b/drivers/common/cnxk/roc_bphy_cgx.h
index d522d4e202..59adddd420 100644
--- a/drivers/common/cnxk/roc_bphy_cgx.h
+++ b/drivers/common/cnxk/roc_bphy_cgx.h
@@ -92,6 +92,14 @@ struct roc_bphy_cgx_link_info {
 	enum roc_bphy_cgx_eth_link_mode mode;
 };
 
+struct roc_bphy_cgx_cpri_mode_change {
+	int gserc_idx;
+	int lane_idx;
+	int rate;
+	bool disable_leq;
+	bool disable_dfe;
+};
+
 __roc_api int roc_bphy_cgx_dev_init(struct roc_bphy_cgx *roc_cgx);
 __roc_api int roc_bphy_cgx_dev_fini(struct roc_bphy_cgx *roc_cgx);
 
@@ -118,9 +126,9 @@ __roc_api int roc_bphy_cgx_ptp_rx_disable(struct roc_bphy_cgx *roc_cgx,
 __roc_api int roc_bphy_cgx_fec_set(struct roc_bphy_cgx *roc_cgx,
 				   unsigned int lmac,
 				   enum roc_bphy_cgx_eth_link_fec fec);
-__roc_api int roc_bphy_cgx_fec_supported_get(struct roc_bphy_cgx *roc_cgx,
-					     unsigned int lmac,
+__roc_api int roc_bphy_cgx_fec_supported_get(struct roc_bphy_cgx *roc_cgx, unsigned int lmac,
 					     enum roc_bphy_cgx_eth_link_fec *fec);
-
+__roc_api int roc_bphy_cgx_cpri_mode_change(struct roc_bphy_cgx *roc_cgx, unsigned int lmac,
+					    struct roc_bphy_cgx_cpri_mode_change *mode);
 
 #endif /* _ROC_BPHY_CGX_H_ */
diff --git a/drivers/common/cnxk/roc_bphy_cgx_priv.h b/drivers/common/cnxk/roc_bphy_cgx_priv.h
index 6a6b5a7b08..cdd94989c8 100644
--- a/drivers/common/cnxk/roc_bphy_cgx_priv.h
+++ b/drivers/common/cnxk/roc_bphy_cgx_priv.h
@@ -69,6 +69,7 @@ enum eth_cmd_id {
 	ETH_CMD_GET_SUPPORTED_FEC = 18,
 	ETH_CMD_SET_FEC = 19,
 	ETH_CMD_SET_PTP_MODE = 34,
+	ETH_CMD_CPRI_MODE_CHANGE = 35,
 };
 
 /* event types - cause of interrupt */
@@ -133,6 +134,13 @@ enum eth_cmd_own {
 /* struct eth_set_fec_args */
 #define SCR1_ETH_SET_FEC_ARGS GENMASK_ULL(9, 8)
 
+/* struct eth_cpri_mode_change_args */
+#define SCR1_CPRI_MODE_CHANGE_ARGS_GSERC_IDX   GENMASK_ULL(11, 8)
+#define SCR1_CPRI_MODE_CHANGE_ARGS_LANE_IDX    GENMASK_ULL(15, 12)
+#define SCR1_CPRI_MODE_CHANGE_ARGS_RATE        GENMASK_ULL(31, 16)
+#define SCR1_CPRI_MODE_CHANGE_ARGS_DISABLE_LEQ BIT_ULL(32)
+#define SCR1_CPRI_MODE_CHANGE_ARGS_DISABLE_DFE BIT_ULL(33)
+
 #define SCR1_OWN_STATUS GENMASK_ULL(1, 0)
 
 #endif /* _ROC_BPHY_CGX_PRIV_H_ */
diff --git a/drivers/common/cnxk/roc_model.h b/drivers/common/cnxk/roc_model.h
index 4567566169..e28965d896 100644
--- a/drivers/common/cnxk/roc_model.h
+++ b/drivers/common/cnxk/roc_model.h
@@ -134,6 +134,30 @@ roc_model_is_cn95_a0(void)
 	return roc_model->flag & ROC_MODEL_CNF95xx_A0;
 }
 
+static inline uint64_t
+roc_model_is_cnf95xxn_a0(void)
+{
+	return roc_model->flag & ROC_MODEL_CNF95xxN_A0;
+}
+
+static inline uint64_t
+roc_model_is_cnf95xxn_a1(void)
+{
+	return roc_model->flag & ROC_MODEL_CNF95xxN_A1;
+}
+
+static inline uint64_t
+roc_model_is_cnf95xxn_b0(void)
+{
+	return roc_model->flag & ROC_MODEL_CNF95xxN_B0;
+}
+
+static inline uint16_t
+roc_model_is_cn95xxn_a0(void)
+{
+	return roc_model->flag & ROC_MODEL_CNF95xxN_A0;
+}
+
 static inline uint64_t
 roc_model_is_cn10ka(void)
 {
diff --git a/drivers/common/cnxk/version.map b/drivers/common/cnxk/version.map
index a77f3f6e3c..720cad61ea 100644
--- a/drivers/common/cnxk/version.map
+++ b/drivers/common/cnxk/version.map
@@ -28,6 +28,7 @@ INTERNAL {
 	roc_ae_fpm_get;
 	roc_ae_fpm_put;
 	roc_aes_xcbc_key_derive;
+	roc_bphy_cgx_cpri_mode_change;
 	roc_bphy_cgx_dev_fini;
 	roc_bphy_cgx_dev_init;
 	roc_bphy_cgx_fec_set;
diff --git a/drivers/raw/cnxk_bphy/cnxk_bphy_cgx.c b/drivers/raw/cnxk_bphy/cnxk_bphy_cgx.c
index 169cbc7855..803b245c78 100644
--- a/drivers/raw/cnxk_bphy/cnxk_bphy_cgx.c
+++ b/drivers/raw/cnxk_bphy/cnxk_bphy_cgx.c
@@ -56,10 +56,12 @@ cnxk_bphy_cgx_process_buf(struct cnxk_bphy_cgx *cgx, unsigned int queue,
 			  struct rte_rawdev_buf *buf)
 {
 	struct cnxk_bphy_cgx_queue *qp = &cgx->queues[queue];
+	struct cnxk_bphy_cgx_msg_cpri_mode_change *cpri_mode;
 	struct cnxk_bphy_cgx_msg_set_link_state *link_state;
 	struct cnxk_bphy_cgx_msg *msg = buf->buf_addr;
 	struct cnxk_bphy_cgx_msg_link_mode *link_mode;
 	struct cnxk_bphy_cgx_msg_link_info *link_info;
+	struct roc_bphy_cgx_cpri_mode_change rcpri_mode;
 	struct roc_bphy_cgx_link_info rlink_info;
 	struct roc_bphy_cgx_link_mode rlink_mode;
 	enum roc_bphy_cgx_eth_link_fec *fec;
@@ -135,6 +137,17 @@ cnxk_bphy_cgx_process_buf(struct cnxk_bphy_cgx *cgx, unsigned int queue,
 		fec = msg->data;
 		ret = roc_bphy_cgx_fec_set(cgx->rcgx, lmac, *fec);
 		break;
+	case CNXK_BPHY_CGX_MSG_TYPE_CPRI_MODE_CHANGE:
+		cpri_mode = msg->data;
+		memset(&rcpri_mode, 0, sizeof(rcpri_mode));
+		rcpri_mode.gserc_idx = cpri_mode->gserc_idx;
+		rcpri_mode.lane_idx = cpri_mode->lane_idx;
+		rcpri_mode.rate = cpri_mode->rate;
+		rcpri_mode.disable_leq = cpri_mode->disable_leq;
+		rcpri_mode.disable_dfe = cpri_mode->disable_dfe;
+		ret = roc_bphy_cgx_cpri_mode_change(cgx->rcgx, lmac,
+						    &rcpri_mode);
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/raw/cnxk_bphy/rte_pmd_bphy.h b/drivers/raw/cnxk_bphy/rte_pmd_bphy.h
index db8a13a4f8..36b75aa385 100644
--- a/drivers/raw/cnxk_bphy/rte_pmd_bphy.h
+++ b/drivers/raw/cnxk_bphy/rte_pmd_bphy.h
@@ -50,6 +50,8 @@ enum cnxk_bphy_cgx_msg_type {
 	CNXK_BPHY_CGX_MSG_TYPE_GET_SUPPORTED_FEC,
 	/** Type used to set FEC */
 	CNXK_BPHY_CGX_MSG_TYPE_SET_FEC,
+	/** Type used to switch from eCPRI to CPRI */
+	CNXK_BPHY_CGX_MSG_TYPE_CPRI_MODE_CHANGE,
 };
 
 /** Available link speeds */
@@ -171,6 +173,19 @@ struct cnxk_bphy_cgx_msg_set_link_state {
 	bool state; /* up or down */
 };
 
+struct cnxk_bphy_cgx_msg_cpri_mode_change {
+	/** SERDES index (0 - 4) */
+	int gserc_idx;
+	/** Lane index (0 - 1) */
+	int lane_idx;
+	/** Baud rate (9830/4915/2458/6144/3072) */
+	int rate;
+	/** Disable LEQ */
+	bool disable_leq;
+	/** Disable  DFE */
+	bool disable_dfe;
+};
+
 struct cnxk_bphy_cgx_msg {
 	/** Message type */
 	enum cnxk_bphy_cgx_msg_type type;
@@ -694,6 +709,31 @@ rte_pmd_bphy_cgx_set_fec(uint16_t dev_id, uint16_t lmac,
 	return __rte_pmd_bphy_enq_deq(dev_id, lmac, &msg, NULL, 0);
 }
 
+/**
+ * Switch from eCPRI to CPRI and change
+ *
+ * @param dev_id
+ *   The identifier of the device
+ * @param lmac
+ *   LMAC number for operation
+ * @param mode
+ *   CPRI structure which holds configuration data
+ *
+ * @return
+ *   Returns 0 on success, negative error code otherwise
+ */
+static __rte_always_inline int
+rte_pmd_bphy_cgx_cpri_mode_change(uint16_t dev_id, uint16_t lmac,
+				  struct cnxk_bphy_cgx_msg_cpri_mode_change *mode)
+{
+	struct cnxk_bphy_cgx_msg msg = {
+		.type = CNXK_BPHY_CGX_MSG_TYPE_CPRI_MODE_CHANGE,
+		.data = mode,
+	};
+
+	return __rte_pmd_bphy_enq_deq(dev_id, lmac, &msg, NULL, 0);
+}
+
 #ifdef __cplusplus
 }
 #endif
-- 
2.25.1


  parent reply	other threads:[~2022-06-04 16:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-04 16:26 [PATCH 00/10] Sync BPHY changes Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 01/10] common/cnxk: update register access for CNF10xxN Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 02/10] common/cnxk: use wider mask to extract RPM ID Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 03/10] raw/cnxk_bphy: add doxygen comments Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 04/10] common/cnxk: don't switch affinity back and forth Tomasz Duszynski
2022-06-04 16:26 ` Tomasz Duszynski [this message]
2022-06-07  9:09   ` [PATCH 05/10] raw/cnxk_bphy: support switching from eCPRI to CPRI Ray Kinsella
2022-06-04 16:26 ` [PATCH 06/10] raw/cnxk_bphy: support enabling TX for CPRI SERDES Tomasz Duszynski
2022-06-07  9:09   ` Ray Kinsella
2022-06-04 16:26 ` [PATCH 07/10] raw/cnxk_bphy: support changing CPRI misc settings Tomasz Duszynski
2022-06-07  9:11   ` Ray Kinsella
2022-06-04 16:26 ` [PATCH 08/10] common/cnxk: remove unused constants Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 09/10] common/cnxk: sync eth mode change command with firmware Tomasz Duszynski
2022-06-04 16:26 ` [PATCH 10/10] common/cnxk: support switching CPRI/ETH back and forth Tomasz Duszynski
2022-06-14  7:09 ` [PATCH 00/10] Sync BPHY changes Tomasz Duszynski
2022-06-22  7:04 ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220604162651.3503338-6-tduszynski@marvell.com \
    --to=tduszynski@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=jpalider@marvell.com \
    --cc=kirankumark@marvell.com \
    --cc=mdr@ashroe.eu \
    --cc=ndabilpuram@marvell.com \
    --cc=skori@marvell.com \
    --cc=skoteshwar@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).