From: Ivan Malov <ivan.malov@oktetlabs.ru>
To: dev@dpdk.org
Cc: Ori Kam <orika@nvidia.com>, Eli Britstein <elibr@nvidia.com>,
Ilya Maximets <i.maximets@ovn.org>,
Thomas Monjalon <thomas@monjalon.net>,
Stephen Hemminger <stephen@networkplumber.org>,
Jerin Jacob <jerinj@marvell.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
Aman Singh <aman.deep.singh@intel.com>,
Yuying Zhang <yuying.zhang@intel.com>,
Ajit Khaparde <ajit.khaparde@broadcom.com>,
Somnath Kotur <somnath.kotur@broadcom.com>,
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>,
Ferruh Yigit <ferruh.yigit@xilinx.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Sachin Saxena <sachin.saxena@oss.nxp.com>
Subject: [PATCH 13/13] ethdev: remove deprecated flow action PHY PORT
Date: Fri, 12 Aug 2022 22:18:27 +0300 [thread overview]
Message-ID: <20220812191827.3187441-14-ivan.malov@oktetlabs.ru> (raw)
In-Reply-To: <20220812191827.3187441-1-ivan.malov@oktetlabs.ru>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
---
app/test-pmd/cmdline_flow.c | 35 -------------
doc/guides/nics/features/bnxt.ini | 1 -
doc/guides/nics/features/cxgbe.ini | 1 -
doc/guides/nics/features/default.ini | 1 -
doc/guides/nics/features/dpaa2.ini | 1 -
doc/guides/nics/features/sfc.ini | 1 -
doc/guides/nics/sfc_efx.rst | 2 -
doc/guides/prog_guide/rte_flow.rst | 22 ---------
doc/guides/rel_notes/release_22_11.rst | 5 ++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 5 --
drivers/net/bnxt/tf_ulp/ulp_rte_handler_tbl.c | 4 --
drivers/net/bnxt/tf_ulp/ulp_rte_parser.c | 49 -------------------
drivers/net/bnxt/tf_ulp/ulp_rte_parser.h | 5 --
drivers/net/cxgbe/cxgbe_flow.c | 6 ---
drivers/net/dpaa2/dpaa2_flow.c | 13 +----
drivers/net/sfc/sfc_mae.c | 36 --------------
lib/ethdev/rte_flow.c | 1 -
lib/ethdev/rte_flow.h | 28 -----------
18 files changed, 6 insertions(+), 210 deletions(-)
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 758c1f0efa..80f4c0bbef 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -487,9 +487,6 @@ enum index {
ACTION_VF,
ACTION_VF_ORIGINAL,
ACTION_VF_ID,
- ACTION_PHY_PORT,
- ACTION_PHY_PORT_ORIGINAL,
- ACTION_PHY_PORT_INDEX,
ACTION_PORT_ID,
ACTION_PORT_ID_ORIGINAL,
ACTION_PORT_ID_ID,
@@ -1799,7 +1796,6 @@ static const enum index next_action[] = {
ACTION_RSS,
ACTION_PF,
ACTION_VF,
- ACTION_PHY_PORT,
ACTION_PORT_ID,
ACTION_METER,
ACTION_METER_COLOR,
@@ -1893,13 +1889,6 @@ static const enum index action_vf[] = {
ZERO,
};
-static const enum index action_phy_port[] = {
- ACTION_PHY_PORT_ORIGINAL,
- ACTION_PHY_PORT_INDEX,
- ACTION_NEXT,
- ZERO,
-};
-
static const enum index action_port_id[] = {
ACTION_PORT_ID_ORIGINAL,
ACTION_PORT_ID_ID,
@@ -5240,30 +5229,6 @@ static const struct token token_list[] = {
.args = ARGS(ARGS_ENTRY(struct rte_flow_action_vf, id)),
.call = parse_vc_conf,
},
- [ACTION_PHY_PORT] = {
- .name = "phy_port",
- .help = "direct packets to physical port index",
- .priv = PRIV_ACTION(PHY_PORT,
- sizeof(struct rte_flow_action_phy_port)),
- .next = NEXT(action_phy_port),
- .call = parse_vc,
- },
- [ACTION_PHY_PORT_ORIGINAL] = {
- .name = "original",
- .help = "use original port index if possible",
- .next = NEXT(action_phy_port, NEXT_ENTRY(COMMON_BOOLEAN)),
- .args = ARGS(ARGS_ENTRY_BF(struct rte_flow_action_phy_port,
- original, 1)),
- .call = parse_vc_conf,
- },
- [ACTION_PHY_PORT_INDEX] = {
- .name = "index",
- .help = "physical port index",
- .next = NEXT(action_phy_port, NEXT_ENTRY(COMMON_UNSIGNED)),
- .args = ARGS(ARGS_ENTRY(struct rte_flow_action_phy_port,
- index)),
- .call = parse_vc_conf,
- },
[ACTION_PORT_ID] = {
.name = "port_id",
.help = "direct matching traffic to a given DPDK port ID",
diff --git a/doc/guides/nics/features/bnxt.ini b/doc/guides/nics/features/bnxt.ini
index c05bcff909..b2d54f06aa 100644
--- a/doc/guides/nics/features/bnxt.ini
+++ b/doc/guides/nics/features/bnxt.ini
@@ -82,7 +82,6 @@ of_push_vlan = Y
of_set_vlan_pcp = Y
of_set_vlan_vid = Y
pf = Y
-phy_port = Y
port_id = Y
port_representor = Y
represented_port = Y
diff --git a/doc/guides/nics/features/cxgbe.ini b/doc/guides/nics/features/cxgbe.ini
index 295816ab9d..a9dbcd0573 100644
--- a/doc/guides/nics/features/cxgbe.ini
+++ b/doc/guides/nics/features/cxgbe.ini
@@ -51,7 +51,6 @@ of_pop_vlan = Y
of_push_vlan = Y
of_set_vlan_pcp = Y
of_set_vlan_vid = Y
-phy_port = Y
queue = Y
set_ipv4_dst = Y
set_ipv4_src = Y
diff --git a/doc/guides/nics/features/default.ini b/doc/guides/nics/features/default.ini
index 7ed5bd8cb9..f7192cb0da 100644
--- a/doc/guides/nics/features/default.ini
+++ b/doc/guides/nics/features/default.ini
@@ -170,7 +170,6 @@ of_set_vlan_pcp =
of_set_vlan_vid =
passthru =
pf =
-phy_port =
port_id =
port_representor =
queue =
diff --git a/doc/guides/nics/features/dpaa2.ini b/doc/guides/nics/features/dpaa2.ini
index 53148ad467..cedc234f26 100644
--- a/doc/guides/nics/features/dpaa2.ini
+++ b/doc/guides/nics/features/dpaa2.ini
@@ -45,7 +45,6 @@ vlan = Y
[rte_flow actions]
drop = Y
-phy_port = Y
port_id = Y
queue = Y
represented_port = Y
diff --git a/doc/guides/nics/features/sfc.ini b/doc/guides/nics/features/sfc.ini
index 3dac105e35..f5ac644278 100644
--- a/doc/guides/nics/features/sfc.ini
+++ b/doc/guides/nics/features/sfc.ini
@@ -70,7 +70,6 @@ of_push_vlan = Y
of_set_vlan_pcp = Y
of_set_vlan_vid = Y
pf = Y
-phy_port = Y
port_id = Y
port_representor = Y
represented_port = Y
diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 6eca86e96f..fcad671da2 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -244,8 +244,6 @@ Supported actions (***transfer*** rules):
- MARK
-- PHY_PORT
-
- PF
- VF
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 9cf4261494..becf7c29c9 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -2003,28 +2003,6 @@ rule or if packets are not addressed to a VF in the first place.
| ``id`` | VF ID |
+--------------+--------------------------------+
-Action: ``PHY_PORT``
-^^^^^^^^^^^^^^^^^^^^
-
-This action is deprecated. Consider:
- - `Action: PORT_REPRESENTOR`_
- - `Action: REPRESENTED_PORT`_
-
-Directs matching traffic to a given physical port index of the underlying
-device.
-
-.. _table_rte_flow_action_phy_port:
-
-.. table:: PHY_PORT
-
- +--------------+-------------------------------------+
- | Field | Value |
- +==============+=====================================+
- | ``original`` | use original port index if possible |
- +--------------+-------------------------------------+
- | ``index`` | physical port index |
- +--------------+-------------------------------------+
-
Action: ``PORT_ID``
^^^^^^^^^^^^^^^^^^^
This action is deprecated. Consider:
diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst
index 343f40a041..a7a2bf2c60 100644
--- a/doc/guides/rel_notes/release_22_11.rst
+++ b/doc/guides/rel_notes/release_22_11.rst
@@ -85,6 +85,9 @@ Removed Items
* ethdev: removed ``RTE_FLOW_ITEM_TYPE_PHY_PORT``;
use ``RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT``.
+* ethdev: removed ``RTE_FLOW_ACTION_TYPE_PHY_PORT``;
+ use ``RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT``.
+
API Changes
-----------
@@ -133,6 +136,8 @@ ABI Changes
* ethdev: enum ``RTE_FLOW_ITEM`` was affected by deprecation procedure.
+* ethdev: enum ``RTE_FLOW_ACTION`` was affected by deprecation procedure.
+
Known Issues
------------
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index b9c2d7a6fe..710d69ddca 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -4014,11 +4014,6 @@ This section lists supported actions and their attributes, if any.
- ``original {boolean}``: use original VF ID if possible.
- ``id {unsigned}``: VF ID.
-- ``phy_port``: direct packets to physical port index.
-
- - ``original {boolean}``: use original port index if possible.
- - ``index {unsigned}``: physical port index.
-
- ``port_id``: direct matching traffic to a given DPDK port ID.
- ``original {boolean}``: use original DPDK port ID if possible.
diff --git a/drivers/net/bnxt/tf_ulp/ulp_rte_handler_tbl.c b/drivers/net/bnxt/tf_ulp/ulp_rte_handler_tbl.c
index 66cd2fba7e..042425ff5c 100644
--- a/drivers/net/bnxt/tf_ulp/ulp_rte_handler_tbl.c
+++ b/drivers/net/bnxt/tf_ulp/ulp_rte_handler_tbl.c
@@ -61,10 +61,6 @@ struct bnxt_ulp_rte_act_info ulp_act_info[] = {
.act_type = BNXT_ULP_ACT_TYPE_SUPPORTED,
.proto_act_func = ulp_rte_vf_act_handler
},
- [RTE_FLOW_ACTION_TYPE_PHY_PORT] = {
- .act_type = BNXT_ULP_ACT_TYPE_SUPPORTED,
- .proto_act_func = ulp_rte_phy_port_act_handler
- },
[RTE_FLOW_ACTION_TYPE_PORT_ID] = {
.act_type = BNXT_ULP_ACT_TYPE_SUPPORTED,
.proto_act_func = ulp_rte_port_act_handler
diff --git a/drivers/net/bnxt/tf_ulp/ulp_rte_parser.c b/drivers/net/bnxt/tf_ulp/ulp_rte_parser.c
index 3faafcf788..1be649a16c 100644
--- a/drivers/net/bnxt/tf_ulp/ulp_rte_parser.c
+++ b/drivers/net/bnxt/tf_ulp/ulp_rte_parser.c
@@ -2255,55 +2255,6 @@ ulp_rte_port_act_handler(const struct rte_flow_action *act_item,
return ulp_rte_parser_act_port_set(param, ifindex, act_dir);
}
-/* Function to handle the parsing of RTE Flow action phy_port. */
-int32_t
-ulp_rte_phy_port_act_handler(const struct rte_flow_action *action_item,
- struct ulp_rte_parser_params *prm)
-{
- const struct rte_flow_action_phy_port *phy_port;
- uint32_t pid;
- int32_t rc;
- uint16_t pid_s;
- enum bnxt_ulp_direction_type dir;
-
- phy_port = action_item->conf;
- if (!phy_port) {
- BNXT_TF_DBG(ERR,
- "ParseErr: Invalid Argument\n");
- return BNXT_TF_RC_PARSE_ERR;
- }
-
- if (phy_port->original) {
- BNXT_TF_DBG(ERR,
- "Parse Err:Port Original not supported\n");
- return BNXT_TF_RC_PARSE_ERR;
- }
- dir = ULP_COMP_FLD_IDX_RD(prm, BNXT_ULP_CF_IDX_DIRECTION);
- if (dir != BNXT_ULP_DIR_EGRESS) {
- BNXT_TF_DBG(ERR,
- "Parse Err:Phy ports are valid only for egress\n");
- return BNXT_TF_RC_PARSE_ERR;
- }
- /* Get the physical port details from port db */
- rc = ulp_port_db_phy_port_vport_get(prm->ulp_ctx, phy_port->index,
- &pid_s);
- if (rc) {
- BNXT_TF_DBG(ERR, "Failed to get port details\n");
- return -EINVAL;
- }
-
- pid = pid_s;
- pid = rte_cpu_to_be_32(pid);
- memcpy(&prm->act_prop.act_details[BNXT_ULP_ACT_PROP_IDX_VPORT],
- &pid, BNXT_ULP_ACT_PROP_SZ_VPORT);
-
- /* Update the action port set bit */
- ULP_COMP_FLD_IDX_WR(prm, BNXT_ULP_CF_IDX_ACT_PORT_IS_SET, 1);
- ULP_COMP_FLD_IDX_WR(prm, BNXT_ULP_CF_IDX_ACT_PORT_TYPE,
- BNXT_ULP_INTF_TYPE_PHY_PORT);
- return BNXT_TF_RC_SUCCESS;
-}
-
/* Function to handle the parsing of RTE Flow action pop vlan. */
int32_t
ulp_rte_of_pop_vlan_act_handler(const struct rte_flow_action *a __rte_unused,
diff --git a/drivers/net/bnxt/tf_ulp/ulp_rte_parser.h b/drivers/net/bnxt/tf_ulp/ulp_rte_parser.h
index 5a9b056b16..f59b10e88b 100644
--- a/drivers/net/bnxt/tf_ulp/ulp_rte_parser.h
+++ b/drivers/net/bnxt/tf_ulp/ulp_rte_parser.h
@@ -194,11 +194,6 @@ int32_t
ulp_rte_port_act_handler(const struct rte_flow_action *act_item,
struct ulp_rte_parser_params *params);
-/* Function to handle the parsing of RTE Flow action phy_port. */
-int32_t
-ulp_rte_phy_port_act_handler(const struct rte_flow_action *action_item,
- struct ulp_rte_parser_params *params);
-
/* Function to handle the parsing of RTE Flow action pop vlan. */
int32_t
ulp_rte_of_pop_vlan_act_handler(const struct rte_flow_action *action_item,
diff --git a/drivers/net/cxgbe/cxgbe_flow.c b/drivers/net/cxgbe/cxgbe_flow.c
index d383334415..d66672a9e6 100644
--- a/drivers/net/cxgbe/cxgbe_flow.c
+++ b/drivers/net/cxgbe/cxgbe_flow.c
@@ -598,7 +598,6 @@ ch_rte_parse_atype_switch(const struct rte_flow_action *a,
const struct rte_flow_action_set_ipv4 *ipv4;
const struct rte_flow_action_set_ipv6 *ipv6;
const struct rte_flow_action_set_tp *tp_port;
- const struct rte_flow_action_phy_port *port;
const struct rte_flow_action_set_mac *mac;
int item_index;
u16 tmp_vlan;
@@ -645,10 +644,6 @@ ch_rte_parse_atype_switch(const struct rte_flow_action *a,
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
fs->newvlan = VLAN_REMOVE;
break;
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
- port = (const struct rte_flow_action_phy_port *)a->conf;
- fs->eport = port->index;
- break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
item_index = cxgbe_get_flow_item_index(items,
RTE_FLOW_ITEM_TYPE_IPV4);
@@ -836,7 +831,6 @@ cxgbe_rtef_parse_actions(struct rte_flow *flow,
goto action_switch;
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
case RTE_FLOW_ACTION_TYPE_MAC_SWAP:
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
diff --git a/drivers/net/dpaa2/dpaa2_flow.c b/drivers/net/dpaa2/dpaa2_flow.c
index 25616b0035..df06c3862e 100644
--- a/drivers/net/dpaa2/dpaa2_flow.c
+++ b/drivers/net/dpaa2/dpaa2_flow.c
@@ -83,7 +83,6 @@ static const
enum rte_flow_action_type dpaa2_supported_action_type[] = {
RTE_FLOW_ACTION_TYPE_END,
RTE_FLOW_ACTION_TYPE_QUEUE,
- RTE_FLOW_ACTION_TYPE_PHY_PORT,
RTE_FLOW_ACTION_TYPE_PORT_ID,
RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT,
RTE_FLOW_ACTION_TYPE_RSS
@@ -92,7 +91,6 @@ enum rte_flow_action_type dpaa2_supported_action_type[] = {
static const
enum rte_flow_action_type dpaa2_supported_fs_action_type[] = {
RTE_FLOW_ACTION_TYPE_QUEUE,
- RTE_FLOW_ACTION_TYPE_PHY_PORT,
RTE_FLOW_ACTION_TYPE_PORT_ID,
RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT,
};
@@ -3281,17 +3279,11 @@ static inline struct rte_eth_dev *
dpaa2_flow_redirect_dev(struct dpaa2_dev_priv *priv,
const struct rte_flow_action *action)
{
- const struct rte_flow_action_phy_port *phy_port;
const struct rte_flow_action_port_id *port_id;
int idx = -1;
struct rte_eth_dev *dest_dev;
- if (action->type == RTE_FLOW_ACTION_TYPE_PHY_PORT) {
- phy_port = (const struct rte_flow_action_phy_port *)
- action->conf;
- if (!phy_port->original)
- idx = phy_port->index;
- } else if (action->type == RTE_FLOW_ACTION_TYPE_PORT_ID) {
+ if (action->type == RTE_FLOW_ACTION_TYPE_PORT_ID) {
port_id = (const struct rte_flow_action_port_id *)
action->conf;
if (!port_id->original)
@@ -3345,7 +3337,6 @@ dpaa2_flow_verify_action(
}
break;
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
case RTE_FLOW_ACTION_TYPE_PORT_ID:
if (!dpaa2_flow_redirect_dev(priv, &actions[j])) {
DPAA2_PMD_ERR("Invalid port id of action");
@@ -3523,7 +3514,6 @@ dpaa2_generic_flow_set(struct rte_flow *flow,
switch (actions[j].type) {
case RTE_FLOW_ACTION_TYPE_QUEUE:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
case RTE_FLOW_ACTION_TYPE_PORT_ID:
memset(&action, 0, sizeof(struct dpni_fs_action_cfg));
flow->action = actions[j].type;
@@ -4098,7 +4088,6 @@ int dpaa2_flow_destroy(struct rte_eth_dev *dev,
switch (flow->action) {
case RTE_FLOW_ACTION_TYPE_QUEUE:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
case RTE_FLOW_ACTION_TYPE_PORT_ID:
if (priv->num_rx_tc > 1) {
/* Remove entry from QoS table first */
diff --git a/drivers/net/sfc/sfc_mae.c b/drivers/net/sfc/sfc_mae.c
index 4ddb63cbe5..421bb6da95 100644
--- a/drivers/net/sfc/sfc_mae.c
+++ b/drivers/net/sfc/sfc_mae.c
@@ -3463,36 +3463,6 @@ sfc_mae_rule_parse_action_count(struct sfc_adapter *sa,
return rc;
}
-static int
-sfc_mae_rule_parse_action_phy_port(struct sfc_adapter *sa,
- const struct rte_flow_action_phy_port *conf,
- efx_mae_actions_t *spec)
-{
- efx_mport_sel_t mport;
- uint32_t phy_port;
- int rc;
-
- if (conf->original != 0)
- phy_port = efx_nic_cfg_get(sa->nic)->enc_assigned_port;
- else
- phy_port = conf->index;
-
- rc = efx_mae_mport_by_phy_port(phy_port, &mport);
- if (rc != 0) {
- sfc_err(sa, "failed to convert phys. port ID %u to m-port selector: %s",
- phy_port, strerror(rc));
- return rc;
- }
-
- rc = efx_mae_action_set_populate_deliver(spec, &mport);
- if (rc != 0) {
- sfc_err(sa, "failed to request action DELIVER with m-port selector 0x%08x: %s",
- mport.sel, strerror(rc));
- }
-
- return rc;
-}
-
static int
sfc_mae_rule_parse_action_pf_vf(struct sfc_adapter *sa,
const struct rte_flow_action_vf *vf_conf,
@@ -3626,7 +3596,6 @@ static const char * const action_names[] = {
[RTE_FLOW_ACTION_TYPE_COUNT] = "COUNT",
[RTE_FLOW_ACTION_TYPE_FLAG] = "FLAG",
[RTE_FLOW_ACTION_TYPE_MARK] = "MARK",
- [RTE_FLOW_ACTION_TYPE_PHY_PORT] = "PHY_PORT",
[RTE_FLOW_ACTION_TYPE_PF] = "PF",
[RTE_FLOW_ACTION_TYPE_VF] = "VF",
[RTE_FLOW_ACTION_TYPE_PORT_ID] = "PORT_ID",
@@ -3745,11 +3714,6 @@ sfc_mae_rule_parse_action(struct sfc_adapter *sa,
custom_error = B_TRUE;
}
break;
- case RTE_FLOW_ACTION_TYPE_PHY_PORT:
- SFC_BUILD_SET_OVERFLOW(RTE_FLOW_ACTION_TYPE_PHY_PORT,
- bundle->actions_mask);
- rc = sfc_mae_rule_parse_action_phy_port(sa, action->conf, spec);
- break;
case RTE_FLOW_ACTION_TYPE_PF:
SFC_BUILD_SET_OVERFLOW(RTE_FLOW_ACTION_TYPE_PF,
bundle->actions_mask);
diff --git a/lib/ethdev/rte_flow.c b/lib/ethdev/rte_flow.c
index e7ccdb772e..eeb9398e77 100644
--- a/lib/ethdev/rte_flow.c
+++ b/lib/ethdev/rte_flow.c
@@ -188,7 +188,6 @@ static const struct rte_flow_desc_data rte_flow_desc_action[] = {
MK_FLOW_ACTION(RSS, sizeof(struct rte_flow_action_rss)),
MK_FLOW_ACTION(PF, 0),
MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
- MK_FLOW_ACTION(PHY_PORT, sizeof(struct rte_flow_action_phy_port)),
MK_FLOW_ACTION(PORT_ID, sizeof(struct rte_flow_action_port_id)),
MK_FLOW_ACTION(METER, sizeof(struct rte_flow_action_meter)),
MK_FLOW_ACTION(SECURITY, sizeof(struct rte_flow_action_security)),
diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
index 066e8c8a99..8c33e84ee8 100644
--- a/lib/ethdev/rte_flow.h
+++ b/lib/ethdev/rte_flow.h
@@ -2224,18 +2224,6 @@ enum rte_flow_action_type {
*/
RTE_FLOW_ACTION_TYPE_VF,
- /**
- * @deprecated
- * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
- * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
- *
- * Directs packets to a given physical port index of the underlying
- * device.
- *
- * See struct rte_flow_action_phy_port.
- */
- RTE_FLOW_ACTION_TYPE_PHY_PORT,
-
/**
* @deprecated
* @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
@@ -2960,22 +2948,6 @@ struct rte_flow_action_vf {
uint32_t id; /**< VF ID. */
};
-/**
- * @deprecated
- * @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
- * @see RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT
- *
- * RTE_FLOW_ACTION_TYPE_PHY_PORT
- *
- * Directs packets to a given physical port index of the underlying
- * device.
- */
-struct rte_flow_action_phy_port {
- uint32_t original:1; /**< Use original port index if possible. */
- uint32_t reserved:31; /**< Reserved, must be zero. */
- uint32_t index; /**< Physical port index. */
-};
-
/**
* @deprecated
* @see RTE_FLOW_ACTION_TYPE_PORT_REPRESENTOR
--
2.30.2
next prev parent reply other threads:[~2022-08-12 19:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-12 19:18 [PATCH 00/13] ethdev: proceed with flow subsystem rework Ivan Malov
2022-08-12 19:18 ` [PATCH 01/13] ethdev: strip experimental tag off Rx metadata negotiate API Ivan Malov
2022-08-12 19:18 ` [PATCH 02/13] ethdev: strip experimental tag off port ID items and actions Ivan Malov
2022-08-15 12:59 ` Ori Kam
2022-08-12 19:18 ` [PATCH 03/13] ethdev: remove experimental tag from flow transfer proxy API Ivan Malov
2022-08-15 12:58 ` Ori Kam
2022-08-12 19:18 ` [PATCH 04/13] net/dpaa2: support represented port flow action Ivan Malov
2022-08-12 19:18 ` [PATCH 05/13] net/cnxk: " Ivan Malov
2022-08-12 19:18 ` [PATCH 06/13] app/testpmd: add port steering targets to sample " Ivan Malov
2022-08-12 19:18 ` [PATCH 07/13] doc: revisit outdated flow rule examples in testpmd tutorial Ivan Malov
2022-08-12 19:18 ` [PATCH 08/13] doc: add new port items and actions to switch representation Ivan Malov
2022-08-12 19:18 ` [PATCH 09/13] doc: rework VF-related explanations in " Ivan Malov
2022-08-12 19:18 ` [PATCH 10/13] ethdev: remove deprecated flow item PF Ivan Malov
2022-08-22 5:32 ` Ori Kam
2022-08-12 19:18 ` [PATCH 11/13] ethdev: remove deprecated flow item VF Ivan Malov
2022-08-22 5:50 ` Ori Kam
2022-08-12 19:18 ` [PATCH 12/13] ethdev: remove deprecated flow item PHY PORT Ivan Malov
2022-08-22 5:33 ` Ori Kam
2022-09-27 7:08 ` Thomas Monjalon
2022-09-27 16:18 ` Ajit Khaparde
2022-08-12 19:18 ` Ivan Malov [this message]
2022-08-22 5:33 ` [PATCH 13/13] ethdev: remove deprecated flow action " Ori Kam
2022-09-27 8:32 ` [PATCH 00/13] ethdev: proceed with flow subsystem rework Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220812191827.3187441-14-ivan.malov@oktetlabs.ru \
--to=ivan.malov@oktetlabs.ru \
--cc=ajit.khaparde@broadcom.com \
--cc=aman.deep.singh@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=elibr@nvidia.com \
--cc=ferruh.yigit@xilinx.com \
--cc=hemant.agrawal@nxp.com \
--cc=i.maximets@ovn.org \
--cc=jerinj@marvell.com \
--cc=orika@nvidia.com \
--cc=rahul.lakkireddy@chelsio.com \
--cc=sachin.saxena@oss.nxp.com \
--cc=somnath.kotur@broadcom.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).