From: Yuan Wang <yuanx.wang@intel.com>
To: aman.deep.singh@intel.com, yuying.zhang@intel.com
Cc: thomas@monjalon.net, andrew.rybchenko@oktetlabs.ru,
ferruh.yigit@xilinx.com, mdr@ashroe.eu, xiaoyun.li@intel.com,
qi.z.zhang@intel.com, qiming.yang@intel.com,
jerinjacobk@gmail.com, viacheslavo@nvidia.com,
stephen@networkplumber.org, xuan.ding@intel.com, dev@dpdk.org,
hpothula@marvell.com, yaqi.tang@intel.com,
Yuan Wang <yuanx.wang@intel.com>,
Wenxuan Wu <wenxuanx.wu@intel.com>
Subject: [PATCH v2 3/4] app/testpmd: add rxhdrs commands and parameters
Date: Fri, 2 Sep 2022 06:36:11 +0800 [thread overview]
Message-ID: <20220901223611.515384-1-yuanx.wang@intel.com> (raw)
In-Reply-To: <20220812181552.2908067-1-yuanx.wang@intel.com>
Add command line parameter:
--rxhdrs=mac,[ipv4,udp]
Set the protocol_hdr of segments to scatter packets on receiving if
split feature is engaged. And the queues with BUFFER_SPLIT flag.
Add interactive mode command:
testpmd>set rxhdrs mac,ipv4,tcp,udp,sctp
(protocol sequence should be valid)
The protocol split feature is off by default. To enable protocol split,
you need:
1. Start testpmd with multiple mempools. E.g. --mbuf-size=2048,2048
2. Configure Rx queue with rx_offload buffer split on.
3. Set the protocol type of buffer split. E.g. set rxhdrs mac,ipv4
(default protocols of testpmd : mac|icmp|ipv4|ipv6|tcp|udp|
sctp|inner_mac|inner_ipv4|inner_ipv6|
inner_tcp|inner_udp|inner_sctp)
Above protocols can be configured in testpmd. But the configuration can
only be applied when it is supported by specific pmd.
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
---
app/test-pmd/cmdline.c | 123 +++++++++++++++++++++++++++++++++++++-
app/test-pmd/config.c | 70 ++++++++++++++++++++++
app/test-pmd/parameters.c | 16 ++++-
app/test-pmd/testpmd.c | 2 +
app/test-pmd/testpmd.h | 6 ++
5 files changed, 213 insertions(+), 4 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b4fe9dfb17..f00b7bc6a4 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -183,7 +183,7 @@ static void cmd_help_long_parsed(void *parsed_result,
"show (rxq|txq) info (port_id) (queue_id)\n"
" Display information for configured RX/TX queue.\n\n"
- "show config (rxtx|cores|fwd|rxoffs|rxpkts|txpkts)\n"
+ "show config (rxtx|cores|fwd|rxoffs|rxpkts|rxhdrs|txpkts)\n"
" Display the given configuration.\n\n"
"read rxd (port_id) (queue_id) (rxd_id)\n"
@@ -307,6 +307,14 @@ static void cmd_help_long_parsed(void *parsed_result,
" Affects only the queues configured with split"
" offloads.\n\n"
+ "set rxhdrs (mac[,ipv4])*\n"
+ " Set the protocol hdr of each segment to scatter"
+ " packets on receiving if split feature is engaged."
+ " Affects only the queues configured with split"
+ " offloads.\n\n"
+ " Supported proto header: mac|ipv4|ipv6|tcp|udp|sctp|"
+ "inner_mac|inner_ipv4|inner_ipv6|inner_tcp|inner_udp|inner_sctp\n"
+
"set txpkts (x[,y]*)\n"
" Set the length of each segment of TXONLY"
" and optionally CSUM packets.\n\n"
@@ -3456,6 +3464,68 @@ static cmdline_parse_inst_t cmd_stop = {
},
};
+static unsigned int
+get_ptype(char *value)
+{
+ uint32_t protocol;
+
+ if (!strcmp(value, "mac"))
+ protocol = RTE_PTYPE_L2_ETHER;
+ else if (!strcmp(value, "ipv4"))
+ protocol = RTE_PTYPE_L3_IPV4;
+ else if (!strcmp(value, "ipv6"))
+ protocol = RTE_PTYPE_L3_IPV6;
+ else if (!strcmp(value, "tcp"))
+ protocol = RTE_PTYPE_L4_TCP;
+ else if (!strcmp(value, "udp"))
+ protocol = RTE_PTYPE_L4_UDP;
+ else if (!strcmp(value, "sctp"))
+ protocol = RTE_PTYPE_L4_SCTP;
+ else if (!strcmp(value, "inner_mac"))
+ protocol = RTE_PTYPE_INNER_L2_ETHER;
+ else if (!strcmp(value, "inner_ipv4"))
+ protocol = RTE_PTYPE_INNER_L3_IPV4;
+ else if (!strcmp(value, "inner_ipv6"))
+ protocol = RTE_PTYPE_INNER_L3_IPV6;
+ else if (!strcmp(value, "inner_tcp"))
+ protocol = RTE_PTYPE_INNER_L4_TCP;
+ else if (!strcmp(value, "inner_udp"))
+ protocol = RTE_PTYPE_INNER_L4_UDP;
+ else if (!strcmp(value, "inner_sctp"))
+ protocol = RTE_PTYPE_INNER_L4_SCTP;
+ else {
+ fprintf(stderr, "Unsupported protocol: %s\n", value);
+ protocol = RTE_PTYPE_UNKNOWN;
+ }
+
+ return protocol;
+}
+/* *** SET RXHDRSLIST *** */
+
+unsigned int
+parse_hdrs_list(const char *str, const char *item_name, unsigned int max_items,
+ unsigned int *parsed_items, int check_hdrs_sequence)
+{
+ unsigned int nb_item;
+ char *cur;
+ char *tmp;
+
+ nb_item = 0;
+ char *str2 = strdup(str);
+ cur = strtok_r(str2, ",", &tmp);
+ while (cur != NULL) {
+ parsed_items[nb_item] = get_ptype(cur);
+ cur = strtok_r(NULL, ",", &tmp);
+ nb_item++;
+ }
+ if (nb_item > max_items)
+ fprintf(stderr, "Number of %s = %u > %u (maximum items)\n",
+ item_name, nb_item + 1, max_items);
+ free(str2);
+ if (!check_hdrs_sequence)
+ return nb_item;
+ return nb_item;
+}
/* *** SET CORELIST and PORTLIST CONFIGURATION *** */
unsigned int
@@ -3825,6 +3895,50 @@ static cmdline_parse_inst_t cmd_set_rxpkts = {
},
};
+/* *** SET SEGMENT HEADERS OF RX PACKETS SPLIT *** */
+struct cmd_set_rxhdrs_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t rxhdrs;
+ cmdline_fixed_string_t values;
+};
+
+static void
+cmd_set_rxhdrs_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_set_rxhdrs_result *res;
+ unsigned int seg_hdrs[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs;
+
+ res = parsed_result;
+ nb_segs = parse_hdrs_list(res->values, "segment hdrs",
+ MAX_SEGS_BUFFER_SPLIT, seg_hdrs, 0);
+ if (nb_segs > 0)
+ set_rx_pkt_hdrs(seg_hdrs, nb_segs);
+ cmd_reconfig_device_queue(RTE_PORT_ALL, 0, 1);
+}
+static cmdline_parse_token_string_t cmd_set_rxhdrs_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+ set, "set");
+static cmdline_parse_token_string_t cmd_set_rxhdrs_rxhdrs =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+ rxhdrs, "rxhdrs");
+static cmdline_parse_token_string_t cmd_set_rxhdrs_values =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_rxhdrs_result,
+ values, NULL);
+
+static cmdline_parse_inst_t cmd_set_rxhdrs = {
+ .f = cmd_set_rxhdrs_parsed,
+ .data = NULL,
+ .help_str = "set rxhdrs <mac[,ipv4]*>",
+ .tokens = {
+ (void *)&cmd_set_rxhdrs_set,
+ (void *)&cmd_set_rxhdrs_rxhdrs,
+ (void *)&cmd_set_rxhdrs_values,
+ NULL,
+ },
+};
/* *** SET SEGMENT LENGTHS OF TXONLY PACKETS *** */
struct cmd_set_txpkts_result {
@@ -6918,6 +7032,8 @@ static void cmd_showcfg_parsed(void *parsed_result,
show_rx_pkt_offsets();
else if (!strcmp(res->what, "rxpkts"))
show_rx_pkt_segments();
+ else if (!strcmp(res->what, "rxhdrs"))
+ show_rx_pkt_hdrs();
else if (!strcmp(res->what, "txpkts"))
show_tx_pkt_segments();
else if (!strcmp(res->what, "txtimes"))
@@ -6930,12 +7046,12 @@ static cmdline_parse_token_string_t cmd_showcfg_port =
TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config");
static cmdline_parse_token_string_t cmd_showcfg_what =
TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what,
- "rxtx#cores#fwd#rxoffs#rxpkts#txpkts#txtimes");
+ "rxtx#cores#fwd#rxoffs#rxpkts#rxhdrs#txpkts#txtimes");
static cmdline_parse_inst_t cmd_showcfg = {
.f = cmd_showcfg_parsed,
.data = NULL,
- .help_str = "show config rxtx|cores|fwd|rxoffs|rxpkts|txpkts|txtimes",
+ .help_str = "show config rxtx|cores|fwd|rxoffs|rxpkts|rxhdrs|txpkts|txtimes",
.tokens = {
(void *)&cmd_showcfg_show,
(void *)&cmd_showcfg_port,
@@ -14166,6 +14282,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
(cmdline_parse_inst_t *)&cmd_set_log,
(cmdline_parse_inst_t *)&cmd_set_rxoffs,
(cmdline_parse_inst_t *)&cmd_set_rxpkts,
+ (cmdline_parse_inst_t *)&cmd_set_rxhdrs,
(cmdline_parse_inst_t *)&cmd_set_txpkts,
(cmdline_parse_inst_t *)&cmd_set_txsplit,
(cmdline_parse_inst_t *)&cmd_set_txtimes,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index a2939867c4..4102ebb3f9 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -4940,6 +4940,76 @@ show_rx_pkt_segments(void)
}
}
+static const char *get_ptype_str(uint32_t ptype)
+{
+ switch (ptype) {
+ case RTE_PTYPE_L2_ETHER:
+ return "outer_mac";
+ case RTE_PTYPE_L3_IPV4:
+ return "ipv4";
+ case RTE_PTYPE_L3_IPV6:
+ return "ipv6";
+ case RTE_PTYPE_L4_TCP:
+ return "tcp";
+ case RTE_PTYPE_L4_UDP:
+ return "udp";
+ case RTE_PTYPE_L4_SCTP:
+ return "sctp";
+ case RTE_PTYPE_INNER_L2_ETHER:
+ return "inner_mac";
+ case RTE_PTYPE_INNER_L3_IPV4:
+ return "inner_ipv4";
+ case RTE_PTYPE_INNER_L3_IPV6:
+ return "inner_ipv6";
+ case RTE_PTYPE_INNER_L4_TCP:
+ return "inner_tcp";
+ case RTE_PTYPE_INNER_L4_UDP:
+ return "inner_udp";
+ case RTE_PTYPE_INNER_L4_SCTP:
+ return "inner_sctp";
+ default:
+ return "unsupported";
+ }
+}
+
+void
+show_rx_pkt_hdrs(void)
+{
+ uint32_t i, n;
+
+ n = rx_pkt_nb_segs;
+ printf("Number of segments: %u\n", n);
+ if (n) {
+ printf("Packet segs: ");
+ for (i = 0; i < n - 1; i++)
+ printf("%s, ", get_ptype_str(rx_pkt_hdr_protos[i]));
+ printf("payload\n");
+ }
+}
+
+void
+set_rx_pkt_hdrs(unsigned int *seg_hdrs, unsigned int nb_segs)
+{
+ unsigned int i;
+
+ if (nb_segs + 1 > MAX_SEGS_BUFFER_SPLIT) {
+ printf("nb segments per RX packets=%u > "
+ "MAX_SEGS_BUFFER_SPLIT - ignored\n", nb_segs + 1);
+ return;
+ }
+
+ memset(rx_pkt_hdr_protos, 0, sizeof(rx_pkt_hdr_protos));
+
+ for (i = 0; i < nb_segs; i++)
+ rx_pkt_hdr_protos[i] = (uint32_t)seg_hdrs[i];
+ rx_pkt_hdr_protos[nb_segs] = RTE_PTYPE_ALL_MASK;
+ /*
+ * We calculate the number of hdrs, but payload is not included,
+ * so rx_pkt_nb_segs would increase 1.
+ */
+ rx_pkt_nb_segs = nb_segs + 1;
+}
+
void
set_rx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs)
{
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index e3c9757f3f..206194c385 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -164,6 +164,7 @@ usage(char* progname)
" Used mainly with PCAP drivers.\n");
printf(" --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
printf(" --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
+ printf(" --rxhdrs=mac[,ipv4]*: set RX segment protocol to split.\n");
printf(" --txpkts=X[,Y]*: set TX segment sizes"
" or total packet length.\n");
printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
@@ -676,6 +677,7 @@ launch_args_parse(int argc, char** argv)
{ "flow-isolate-all", 0, 0, 0 },
{ "rxoffs", 1, 0, 0 },
{ "rxpkts", 1, 0, 0 },
+ { "rxhdrs", 1, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "txonly-multi-flow", 0, 0, 0 },
{ "rxq-share", 2, 0, 0 },
@@ -1331,7 +1333,6 @@ launch_args_parse(int argc, char** argv)
if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
unsigned int nb_segs;
-
nb_segs = parse_item_list
(optarg, "rxpkt segments",
MAX_SEGS_BUFFER_SPLIT,
@@ -1341,6 +1342,19 @@ launch_args_parse(int argc, char** argv)
else
rte_exit(EXIT_FAILURE, "bad rxpkts\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "rxhdrs")) {
+ unsigned int seg_hdrs[MAX_SEGS_BUFFER_SPLIT];
+ unsigned int nb_segs;
+
+ nb_segs = parse_hdrs_list
+ (optarg, "rxpkt segments",
+ MAX_SEGS_BUFFER_SPLIT,
+ seg_hdrs, 0);
+ if (nb_segs >= 1)
+ set_rx_pkt_hdrs(seg_hdrs, nb_segs);
+ else
+ rte_exit(EXIT_FAILURE, "bad rxpkts\n");
+ }
if (!strcmp(lgopts[opt_idx].name, "txpkts")) {
unsigned seg_lengths[RTE_MAX_SEGS_PER_PKT];
unsigned int nb_segs;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index addcbcac85..157db60cd4 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -247,6 +247,7 @@ uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
uint8_t rx_pkt_nb_segs; /**< Number of segments to split */
uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
uint8_t rx_pkt_nb_offs; /**< Number of specified offsets */
+uint32_t rx_pkt_hdr_protos[MAX_SEGS_BUFFER_SPLIT];
/*
* Configuration of packet segments used by the "txonly" processing engine.
@@ -2685,6 +2686,7 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
rx_seg->offset = i < rx_pkt_nb_offs ?
rx_pkt_seg_offsets[i] : 0;
rx_seg->mp = mpx ? mpx : mp;
+ rx_seg->proto_hdr = rx_pkt_hdr_protos[i];
}
rx_conf->rx_nseg = rx_pkt_nb_segs;
rx_conf->rx_seg = rx_useg;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index fb2f5195d3..de992c9416 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -562,6 +562,7 @@ extern uint32_t max_rx_pkt_len;
* Configuration of packet segments used to scatter received packets
* if some of split features is configured.
*/
+extern uint32_t rx_pkt_hdr_protos[MAX_SEGS_BUFFER_SPLIT];
extern uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
extern uint8_t rx_pkt_nb_segs; /**< Number of segments to split */
extern uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
@@ -892,6 +893,9 @@ inc_tx_burst_stats(struct fwd_stream *fs, uint16_t nb_tx)
unsigned int parse_item_list(const char *str, const char *item_name,
unsigned int max_items,
unsigned int *parsed_items, int check_unique_values);
+unsigned int parse_hdrs_list(const char *str, const char *item_name,
+ unsigned int max_item,
+ unsigned int *parsed_items, int check_unique_values);
void launch_args_parse(int argc, char** argv);
void cmdline_read_from_file(const char *filename);
int init_cmdline(void);
@@ -1049,6 +1053,8 @@ void set_record_core_cycles(uint8_t on_off);
void set_record_burst_stats(uint8_t on_off);
void set_verbose_level(uint16_t vb_level);
void set_rx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs);
+void set_rx_pkt_hdrs(unsigned int *seg_protos, unsigned int nb_segs);
+void show_rx_pkt_hdrs(void);
void show_rx_pkt_segments(void);
void set_rx_pkt_offsets(unsigned int *seg_offsets, unsigned int nb_offs);
void show_rx_pkt_offsets(void);
--
2.25.1
next prev parent reply other threads:[~2022-09-01 14:48 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-12 18:15 [PATCH 0/4] support protocol based buffer split Yuan Wang
2022-08-12 18:15 ` [PATCH 1/4] ethdev: introduce protocol header API Yuan Wang
2022-08-12 18:15 ` [PATCH 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-08-12 18:15 ` [PATCH 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-08-12 18:15 ` [PATCH 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-01 22:33 ` [PATCH v2 0/4] support protocol based buffer split Yuan Wang
2022-09-01 22:34 ` [PATCH v2 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-01 22:35 ` [PATCH v2 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-01 22:36 ` Yuan Wang [this message]
2022-09-01 22:37 ` [PATCH v2 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-02 19:10 ` [PATCH v3 0/4] support protocol based buffer split Yuan Wang
2022-09-02 19:10 ` [PATCH v3 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-12 11:24 ` Andrew Rybchenko
2022-09-16 8:34 ` Wang, YuanX
2022-09-02 19:10 ` [PATCH v3 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-12 11:47 ` Andrew Rybchenko
2022-09-16 8:38 ` Wang, YuanX
2022-09-20 5:35 ` Andrew Rybchenko
2022-09-22 3:13 ` Wang, YuanX
2022-09-13 7:56 ` Suanming Mou
2022-09-16 8:39 ` Wang, YuanX
2022-09-02 19:10 ` [PATCH v3 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-02 19:10 ` [PATCH v3 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-20 11:12 ` [PATCH v4 0/4] support protocol based buffer split Yuan Wang
2022-09-20 11:12 ` [PATCH v4 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-20 11:12 ` [PATCH v4 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-20 11:12 ` [PATCH v4 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-20 11:12 ` [PATCH v4 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-26 9:40 ` [PATCH v5 0/4] support protocol based buffer split Yuan Wang
2022-09-26 9:40 ` [PATCH v5 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-26 9:40 ` [PATCH v5 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-28 15:42 ` Wang, YuanX
2022-09-26 9:40 ` [PATCH v5 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-26 9:40 ` [PATCH v5 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-29 18:59 ` [PATCH v6 0/4] support protocol based buffer split Yuan Wang
2022-09-29 18:59 ` [PATCH v6 1/4] ethdev: introduce protocol header API Yuan Wang
2022-09-29 18:59 ` [PATCH v6 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-09-29 18:59 ` [PATCH v6 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-09-29 18:59 ` [PATCH v6 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-09-30 6:45 ` Tang, Yaqi
2022-10-01 21:05 ` [PATCH v7 0/4] support protocol based buffer split Yuan Wang
2022-10-01 21:05 ` [PATCH v7 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-03 7:04 ` Andrew Rybchenko
2022-10-04 2:21 ` Wang, YuanX
2022-10-04 7:52 ` Andrew Rybchenko
2022-10-04 15:00 ` Wang, YuanX
2022-10-01 21:05 ` [PATCH v7 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-02 4:01 ` Wang, YuanX
2022-10-03 7:47 ` Andrew Rybchenko
2022-10-04 2:48 ` Wang, YuanX
2022-10-04 8:22 ` Andrew Rybchenko
2022-10-04 15:01 ` Wang, YuanX
2022-10-01 21:05 ` [PATCH v7 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-01 21:05 ` [PATCH v7 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-10-05 23:18 ` [PATCH v8 0/4] support protocol based buffer split Yuan Wang
2022-10-05 23:18 ` [PATCH v8 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-06 10:11 ` Andrew Rybchenko
2022-10-05 23:18 ` [PATCH v8 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-06 10:11 ` Andrew Rybchenko
2022-10-08 14:30 ` Ding, Xuan
2022-10-05 23:18 ` [PATCH v8 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-06 10:12 ` Andrew Rybchenko
2022-10-05 23:18 ` [PATCH v8 4/4] net/ice: support buffer split in Rx path Yuan Wang
2022-10-06 10:12 ` Andrew Rybchenko
2022-10-06 10:13 ` [PATCH v8 0/4] support protocol based buffer split Andrew Rybchenko
2022-10-09 20:25 ` [PATCH v9 " Yuan Wang
2022-10-09 14:58 ` Andrew Rybchenko
2022-10-10 2:45 ` Ding, Xuan
2022-10-09 20:25 ` [PATCH v9 1/4] ethdev: introduce protocol header API Yuan Wang
2022-10-09 20:25 ` [PATCH v9 2/4] ethdev: introduce protocol hdr based buffer split Yuan Wang
2022-10-09 20:25 ` [PATCH v9 3/4] app/testpmd: add rxhdrs commands and parameters Yuan Wang
2022-10-09 20:25 ` [PATCH v9 4/4] net/ice: support buffer split in Rx path Yuan Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220901223611.515384-1-yuanx.wang@intel.com \
--to=yuanx.wang@intel.com \
--cc=aman.deep.singh@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@xilinx.com \
--cc=hpothula@marvell.com \
--cc=jerinjacobk@gmail.com \
--cc=mdr@ashroe.eu \
--cc=qi.z.zhang@intel.com \
--cc=qiming.yang@intel.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
--cc=wenxuanx.wu@intel.com \
--cc=xiaoyun.li@intel.com \
--cc=xuan.ding@intel.com \
--cc=yaqi.tang@intel.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).