From: Feifei Wang <feifei.wang2@arm.com>
Cc: dev@dpdk.org, nd@arm.com, Feifei Wang <feifei.wang2@arm.com>,
Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>,
Ruifeng Wang <ruifeng.wang@arm.com>
Subject: [PATCH v2 3/3] examples/l3fwd: enable direct rearm mode
Date: Tue, 27 Sep 2022 10:47:56 +0800 [thread overview]
Message-ID: <20220927024756.947272-4-feifei.wang2@arm.com> (raw)
In-Reply-To: <20220927024756.947272-1-feifei.wang2@arm.com>
Enable direct rearm mode in l3fwd. Users can use parameters:
'--direct-rearm=(rx_portid,rx_queueid,tx_portid,tx_queueid)'
to enable direct rearm.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
---
examples/l3fwd/l3fwd.h | 12 +++++
examples/l3fwd/l3fwd_lpm.c | 22 +++++++++
examples/l3fwd/main.c | 94 +++++++++++++++++++++++++++++++++++++-
3 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 40b5f32a9e..db097e344c 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -57,6 +57,10 @@
#endif
#define HASH_ENTRY_NUMBER_DEFAULT 16
+/* MAX number of direct rearm mapping entry */
+#define MAX_DIRECT_REARM_ENTRY_NUMBER 16
+#define MAX_DIRECT_REARM_QUEUE_PER_PORT 8
+
struct parm_cfg {
const char *rule_ipv4_name;
const char *rule_ipv6_name;
@@ -114,6 +118,14 @@ extern struct parm_cfg parm_config;
extern struct acl_algorithms acl_alg[];
+/* Used in direct rearm mode */
+extern bool enabled_direct_rearm;
+extern uint8_t direct_rearm_entry_number;
+extern bool queue_enabled_direct_rearm[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+extern uint16_t direct_rearm_map_tx_port[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+extern uint16_t direct_rearm_map_tx_queue[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+extern uint8_t direct_rearm_entry_idx[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index 22d7f61a42..973fe70aae 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -150,6 +150,8 @@ lpm_main_loop(__rte_unused void *dummy)
int i, nb_rx;
uint16_t portid;
uint8_t queueid;
+ uint8_t idx;
+ struct rte_eth_txq_data txq_data[MAX_DIRECT_REARM_ENTRY_NUMBER];
struct lcore_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
US_PER_S * BURST_TX_DRAIN_US;
@@ -175,6 +177,20 @@ lpm_main_loop(__rte_unused void *dummy)
lcore_id, portid, queueid);
}
+ if (enabled_direct_rearm) {
+ uint16_t tx_portid;
+ uint8_t tx_queueid;
+
+ for (i = 0; i < n_rx_q; i++) {
+ portid = qconf->rx_queue_list[i].port_id;
+ queueid = qconf->rx_queue_list[i].queue_id;
+ tx_portid = direct_rearm_map_tx_port[portid][queueid];
+ tx_queueid = direct_rearm_map_tx_queue[portid][queueid];
+ idx = direct_rearm_entry_idx[portid][queueid];
+ rte_eth_tx_queue_data_get(tx_portid, tx_queueid, &(txq_data[idx]));
+ }
+ }
+
cur_tsc = rte_rdtsc();
prev_tsc = cur_tsc;
@@ -205,6 +221,12 @@ lpm_main_loop(__rte_unused void *dummy)
for (i = 0; i < n_rx_q; ++i) {
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
+
+ if (queue_enabled_direct_rearm[portid][queueid]) {
+ idx = direct_rearm_entry_idx[portid][queueid];
+ rte_eth_rx_direct_rearm(portid, queueid, &(txq_data[idx]));
+ }
+
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
MAX_PKT_BURST);
if (nb_rx == 0)
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index e090328fcc..2e9c5c0dc4 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -91,6 +91,20 @@ uint32_t enabled_port_mask;
int ipv6; /**< ipv6 is false by default. */
uint32_t hash_entry_number = HASH_ENTRY_NUMBER_DEFAULT;
+/* Used for direct rearm mode */
+bool enabled_direct_rearm;/**< Flag to enable direct rearm mode. */
+uint8_t direct_rearm_entry_number; /**< Number of entry for direct rearm map. */
+/**< Direct rearm config parameters. */
+uint16_t direct_rearm_config[MAX_DIRECT_REARM_ENTRY_NUMBER][4];
+/**< Enable direct rearm flag for Rx queue . */
+bool queue_enabled_direct_rearm[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+/**< Matrix for Rx queue mapping Tx port in direct rearm mode. */
+uint16_t direct_rearm_map_tx_port[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+/**< Matrix for Rx queue mapping Tx queue in direct rearm mode. */
+uint16_t direct_rearm_map_tx_queue[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+/**< Matrix for Rx queue mapping entry idx in direct rearm mode. */
+uint8_t direct_rearm_entry_idx[RTE_MAX_ETHPORTS][MAX_DIRECT_REARM_QUEUE_PER_PORT];
+
struct lcore_conf lcore_conf[RTE_MAX_LCORE];
struct parm_cfg parm_config;
@@ -403,6 +417,7 @@ print_usage(const char *prgname)
" [--mode]"
" [--eventq-sched]"
" [--event-vector [--event-vector-size SIZE] [--event-vector-tmo NS]]"
+ " --direct-rearm (rx_port, rx_queue, tx_port, tx_queue)[,(rx_port, rx_queue, tx_port, tx_queue)]"
" [-E]"
" [-L]\n\n"
@@ -436,6 +451,7 @@ print_usage(const char *prgname)
" --event-vector: Enable event vectorization.\n"
" --event-vector-size: Max vector size if event vectorization is enabled.\n"
" --event-vector-tmo: Max timeout to form vector in nanoseconds if event vectorization is enabled\n"
+ " --direct-rearm (rx_port, rx_queue, tx_port, tx_queue): Put Tx queue sw-ring buffers into Rx queue\n"
" -E : Enable exact match, legacy flag please use --lookup=em instead\n"
" -L : Enable longest prefix match, legacy flag please use --lookup=lpm instead\n"
" --rule_ipv4=FILE: Specify the ipv4 rules entries file.\n"
@@ -670,6 +686,53 @@ parse_lookup(const char *optarg)
return 0;
}
+static int
+parse_direct_rearm(const char *q_arg)
+{
+ char s[256];
+ const char *p, *p0 = q_arg;
+ char *end;
+ enum fieldnames {
+ FLD_RX_PORT = 0,
+ FLD_RX_QUEUE,
+ FLD_TX_PORT,
+ FLD_TX_QUEUE,
+ _NUM_FLD
+ };
+ unsigned long int_fld[_NUM_FLD];
+ char *str_fld[_NUM_FLD];
+ int i;
+ unsigned int size;
+
+ while ((p = strchr(p0, '(')) != NULL) {
+ ++p;
+ p0 = strchr(p, ')');
+ if (p0 == NULL)
+ return -1;
+
+ size = p0 - p;
+ if (size >= sizeof(s))
+ return -1;
+
+ snprintf(s, sizeof(s), "%.*s", size, p);
+ if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
+ return -1;
+ for (i = 0; i < _NUM_FLD; i++) {
+ errno = 0;
+ int_fld[i] = strtoul(str_fld[i], &end, 0);
+ if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
+ return -1;
+ }
+
+ direct_rearm_config[direct_rearm_entry_number][0] = int_fld[FLD_RX_PORT];
+ direct_rearm_config[direct_rearm_entry_number][1] = int_fld[FLD_RX_QUEUE];
+ direct_rearm_config[direct_rearm_entry_number][2] = int_fld[FLD_TX_PORT];
+ direct_rearm_config[direct_rearm_entry_number][3] = int_fld[FLD_TX_QUEUE];
+ ++direct_rearm_entry_number;
+ }
+ return 0;
+}
+
#define MAX_JUMBO_PKT_LEN 9600
static const char short_options[] =
@@ -696,6 +759,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_ENABLE_VECTOR "event-vector"
#define CMD_LINE_OPT_VECTOR_SIZE "event-vector-size"
#define CMD_LINE_OPT_VECTOR_TMO_NS "event-vector-tmo"
+#define CMD_LINE_OPT_DIRECT_REARM "direct-rearm"
#define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
@@ -725,7 +789,8 @@ enum {
CMD_LINE_OPT_LOOKUP_NUM,
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
- CMD_LINE_OPT_VECTOR_TMO_NS_NUM
+ CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
+ CMD_LINE_OPT_DIRECT_REARM_NUM
};
static const struct option lgopts[] = {
@@ -747,6 +812,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_ENABLE_VECTOR, 0, 0, CMD_LINE_OPT_ENABLE_VECTOR_NUM},
{CMD_LINE_OPT_VECTOR_SIZE, 1, 0, CMD_LINE_OPT_VECTOR_SIZE_NUM},
{CMD_LINE_OPT_VECTOR_TMO_NS, 1, 0, CMD_LINE_OPT_VECTOR_TMO_NS_NUM},
+ {CMD_LINE_OPT_DIRECT_REARM, 1, 0, CMD_LINE_OPT_DIRECT_REARM_NUM},
{CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
@@ -912,6 +978,15 @@ parse_args(int argc, char **argv)
case CMD_LINE_OPT_VECTOR_TMO_NS_NUM:
evt_rsrc->vector_tmo_ns = strtoull(optarg, NULL, 10);
break;
+ case CMD_LINE_OPT_DIRECT_REARM_NUM:
+ enabled_direct_rearm = 1;
+ ret = parse_direct_rearm(optarg);
+ if (ret) {
+ fprintf(stderr, "Invalid direct rearm map\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
case CMD_LINE_OPT_RULE_IPV4_NUM:
l3fwd_set_rule_ipv4_name(optarg);
break;
@@ -1594,6 +1669,23 @@ main(int argc, char **argv)
}
}
+ if (enabled_direct_rearm) {
+ uint16_t rx_port, tx_port;
+ uint8_t rx_queue, tx_queue;
+ uint8_t m = 0;
+ while (m < direct_rearm_entry_number) {
+ rx_port = direct_rearm_config[m][0];
+ rx_queue = direct_rearm_config[m][1];
+ tx_port = direct_rearm_config[m][2];
+ tx_queue = direct_rearm_config[m][3];
+ queue_enabled_direct_rearm[rx_port][rx_queue] = 1;
+ direct_rearm_map_tx_port[rx_port][rx_queue] = tx_port;
+ direct_rearm_map_tx_queue[rx_port][rx_queue] = tx_queue;
+ direct_rearm_entry_idx[rx_port][rx_queue] = m;
+ m++;
+ }
+ }
+
check_all_ports_link_status(enabled_port_mask);
ret = 0;
--
2.25.1
next prev parent reply other threads:[~2022-09-27 2:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-27 2:47 [PATCH v2 0/3] Direct re-arming of buffers on receive side Feifei Wang
2022-09-27 2:47 ` [PATCH v2 1/3] ethdev: add API for direct rearm mode Feifei Wang
2022-10-03 8:58 ` Konstantin Ananyev
2022-10-11 7:19 ` 回复: " Feifei Wang
2022-10-11 22:21 ` Konstantin Ananyev
2022-10-12 13:38 ` 回复: " Feifei Wang
2022-10-13 9:48 ` Konstantin Ananyev
2022-10-26 7:35 ` 回复: " Feifei Wang
2022-10-31 16:36 ` Konstantin Ananyev
2023-01-04 7:39 ` 回复: " Feifei Wang
2022-09-27 2:47 ` [PATCH v2 2/3] net/i40e: enable " Feifei Wang
2022-09-27 2:47 ` Feifei Wang [this message]
2022-09-30 11:56 ` [PATCH v2 3/3] examples/l3fwd: " Jerin Jacob
2022-10-11 7:28 ` 回复: " Feifei Wang
2022-10-11 9:38 ` Jerin Jacob
2022-09-29 6:19 ` 回复: [PATCH v2 0/3] Direct re-arming of buffers on receive side Feifei Wang
2022-09-29 10:29 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220927024756.947272-4-feifei.wang2@arm.com \
--to=feifei.wang2@arm.com \
--cc=dev@dpdk.org \
--cc=honnappa.nagarahalli@arm.com \
--cc=nd@arm.com \
--cc=ruifeng.wang@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).