From: Olivier Matz <olivier.matz@6wind.com>
To: dev@dpdk.org
Cc: Ray Kinsella <mdr@ashroe.eu>, Parav Pandit <parav@nvidia.com>,
Xueming Li <xuemingl@nvidia.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Sachin Saxena <sachin.saxena@oss.nxp.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
Long Li <longli@microsoft.com>
Subject: [PATCH] drivers/bus: set device NUMA node to unknown by default
Date: Thu, 29 Sep 2022 14:05:12 +0200 [thread overview]
Message-ID: <20220929120512.480-1-olivier.matz@6wind.com> (raw)
The dev->device.numa_node field is set by each bus driver for
every device it manages to indicate on which NUMA node this device lies.
When this information is unknown, the assigned value is not consistent
across the bus drivers.
Set the default value to SOCKET_ID_ANY (-1) by all bus drivers
when the NUMA information is unavailable.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
doc/guides/rel_notes/deprecation.rst | 7 -------
doc/guides/rel_notes/release_22_11.rst | 6 ++++++
drivers/bus/auxiliary/auxiliary_common.c | 8 ++------
drivers/bus/auxiliary/linux/auxiliary.c | 13 +++++--------
drivers/bus/dpaa/dpaa_bus.c | 1 +
drivers/bus/fslmc/fslmc_bus.c | 1 +
drivers/bus/pci/bsd/pci.c | 2 +-
drivers/bus/pci/linux/pci.c | 16 ++++++----------
drivers/bus/pci/pci_common.c | 8 ++------
drivers/bus/pci/windows/pci.c | 1 -
drivers/bus/vmbus/linux/vmbus_bus.c | 1 -
drivers/bus/vmbus/vmbus_common.c | 8 ++------
12 files changed, 26 insertions(+), 46 deletions(-)
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index be231ff8d2..75645f0a9a 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -36,13 +36,6 @@ Deprecation Notices
``__atomic_thread_fence`` must be used for patches that need to be merged in
20.08 onwards. This change will not introduce any performance degradation.
-* bus: The ``dev->device.numa_node`` field is set by each bus driver for
- every device it manages to indicate on which NUMA node this device lies.
- When this information is unknown, the assigned value is not consistent
- across the bus drivers.
- In DPDK 22.11, the default value will be set to -1 by all bus drivers
- when the NUMA information is unavailable.
-
* kni: The KNI kernel module and library are not recommended for use by new
applications - other technologies such as virtio-user are recommended instead.
Following the DPDK technical board
diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst
index 0231959874..5989e4a04f 100644
--- a/doc/guides/rel_notes/release_22_11.rst
+++ b/doc/guides/rel_notes/release_22_11.rst
@@ -266,6 +266,12 @@ ABI Changes
* eventdev: Added ``weight`` and ``affinity`` fields
to ``rte_event_queue_conf`` structure.
+* bus: Changed the device numa node to -1 when NUMA information is unavailable.
+ The ``dev->device.numa_node`` field is set by each bus driver for
+ every device it manages to indicate on which NUMA node this device lies.
+ When this information is unknown, the assigned value was not consistent
+ across the bus drivers.
+
Known Issues
------------
diff --git a/drivers/bus/auxiliary/auxiliary_common.c b/drivers/bus/auxiliary/auxiliary_common.c
index 259ff152c4..6bb1fe7c96 100644
--- a/drivers/bus/auxiliary/auxiliary_common.c
+++ b/drivers/bus/auxiliary/auxiliary_common.c
@@ -105,12 +105,8 @@ rte_auxiliary_probe_one_driver(struct rte_auxiliary_driver *drv,
return -1;
}
- if (dev->device.numa_node < 0) {
- if (rte_socket_count() > 1)
- AUXILIARY_LOG(INFO, "Device %s is not NUMA-aware, defaulting socket to 0",
- dev->name);
- dev->device.numa_node = 0;
- }
+ if (dev->device.numa_node < 0 && rte_socket_count() > 1)
+ RTE_LOG(INFO, EAL, "Device %s is not NUMA-aware\n", dev->name);
iova_mode = rte_eal_iova_mode();
if ((drv->drv_flags & RTE_AUXILIARY_DRV_NEED_IOVA_AS_VA) > 0 &&
diff --git a/drivers/bus/auxiliary/linux/auxiliary.c b/drivers/bus/auxiliary/linux/auxiliary.c
index d4c564cd78..02fc9285dc 100644
--- a/drivers/bus/auxiliary/linux/auxiliary.c
+++ b/drivers/bus/auxiliary/linux/auxiliary.c
@@ -40,14 +40,11 @@ auxiliary_scan_one(const char *dirname, const char *name)
/* Get NUMA node, default to 0 if not present */
snprintf(filename, sizeof(filename), "%s/%s/numa_node",
dirname, name);
- if (access(filename, F_OK) != -1) {
- if (eal_parse_sysfs_value(filename, &tmp) == 0)
- dev->device.numa_node = tmp;
- else
- dev->device.numa_node = -1;
- } else {
- dev->device.numa_node = 0;
- }
+ if (access(filename, F_OK) == 0 &&
+ eal_parse_sysfs_value(filename, &tmp) == 0)
+ dev->device.numa_node = tmp;
+ else
+ dev->device.numa_node = SOCKET_ID_ANY;
auxiliary_on_scan(dev);
diff --git a/drivers/bus/dpaa/dpaa_bus.c b/drivers/bus/dpaa/dpaa_bus.c
index 682427ba2c..447b222a76 100644
--- a/drivers/bus/dpaa/dpaa_bus.c
+++ b/drivers/bus/dpaa/dpaa_bus.c
@@ -179,6 +179,7 @@ dpaa_create_device_list(void)
}
dev->device.bus = &rte_dpaa_bus.bus;
+ dev->device.numa_node = SOCKET_ID_ANY;
/* Allocate interrupt handle instance */
dev->intr_handle =
diff --git a/drivers/bus/fslmc/fslmc_bus.c b/drivers/bus/fslmc/fslmc_bus.c
index 8503004e3d..57bfb5111a 100644
--- a/drivers/bus/fslmc/fslmc_bus.c
+++ b/drivers/bus/fslmc/fslmc_bus.c
@@ -156,6 +156,7 @@ scan_one_fslmc_device(char *dev_name)
}
dev->device.bus = &rte_fslmc_bus.bus;
+ dev->device.numa_node = SOCKET_ID_ANY;
/* Allocate interrupt instance */
dev->intr_handle =
diff --git a/drivers/bus/pci/bsd/pci.c b/drivers/bus/pci/bsd/pci.c
index 844d145fed..7459d15c7e 100644
--- a/drivers/bus/pci/bsd/pci.c
+++ b/drivers/bus/pci/bsd/pci.c
@@ -246,7 +246,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
dev->max_vfs = 0;
/* FreeBSD has no NUMA support (yet) */
- dev->device.numa_node = 0;
+ dev->device.numa_node = SOCKET_ID_ANY;
pci_common_set(dev);
diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index c8703d52f3..ade17079fc 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -283,17 +283,13 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
}
/* get numa node, default to 0 if not present */
- snprintf(filename, sizeof(filename), "%s/numa_node",
- dirname);
+ snprintf(filename, sizeof(filename), "%s/numa_node", dirname);
- if (access(filename, F_OK) != -1) {
- if (eal_parse_sysfs_value(filename, &tmp) == 0)
- dev->device.numa_node = tmp;
- else
- dev->device.numa_node = -1;
- } else {
- dev->device.numa_node = 0;
- }
+ if (access(filename, F_OK) == 0 &&
+ eal_parse_sysfs_value(filename, &tmp) == 0)
+ dev->device.numa_node = tmp;
+ else
+ dev->device.numa_node = SOCKET_ID_ANY;
pci_common_set(dev);
diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
index 5ea72bcf23..a59c5b4286 100644
--- a/drivers/bus/pci/pci_common.c
+++ b/drivers/bus/pci/pci_common.c
@@ -235,12 +235,8 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
return 1;
}
- if (dev->device.numa_node < 0) {
- if (rte_socket_count() > 1)
- RTE_LOG(INFO, EAL, "Device %s is not NUMA-aware, defaulting socket to 0\n",
- dev->name);
- dev->device.numa_node = 0;
- }
+ if (dev->device.numa_node < 0 && rte_socket_count() > 1)
+ RTE_LOG(INFO, EAL, "Device %s is not NUMA-aware\n", dev->name);
already_probed = rte_dev_is_probed(&dev->device);
if (already_probed && !(dr->drv_flags & RTE_PCI_DRV_PROBE_AGAIN)) {
diff --git a/drivers/bus/pci/windows/pci.c b/drivers/bus/pci/windows/pci.c
index 3f7a8b9432..5cf05ce1a0 100644
--- a/drivers/bus/pci/windows/pci.c
+++ b/drivers/bus/pci/windows/pci.c
@@ -249,7 +249,6 @@ get_device_resource_info(HDEVINFO dev_info,
DWORD error = GetLastError();
if (error == ERROR_NOT_FOUND) {
/* On older CPUs, NUMA is not bound to PCIe locality. */
- dev->device.numa_node = 0;
return ERROR_SUCCESS;
}
RTE_LOG_WIN32_ERR("SetupDiGetDevicePropertyW"
diff --git a/drivers/bus/vmbus/linux/vmbus_bus.c b/drivers/bus/vmbus/linux/vmbus_bus.c
index f502783f7a..01d8111b85 100644
--- a/drivers/bus/vmbus/linux/vmbus_bus.c
+++ b/drivers/bus/vmbus/linux/vmbus_bus.c
@@ -293,7 +293,6 @@ vmbus_scan_one(const char *name)
goto error;
dev->device.numa_node = tmp;
} else {
- /* if no NUMA support, set default to 0 */
dev->device.numa_node = SOCKET_ID_ANY;
}
diff --git a/drivers/bus/vmbus/vmbus_common.c b/drivers/bus/vmbus/vmbus_common.c
index 03b39c82b7..8d32d66504 100644
--- a/drivers/bus/vmbus/vmbus_common.c
+++ b/drivers/bus/vmbus/vmbus_common.c
@@ -111,12 +111,8 @@ vmbus_probe_one_driver(struct rte_vmbus_driver *dr,
/* reference driver structure */
dev->driver = dr;
- if (dev->device.numa_node < 0) {
- if (rte_socket_count() > 1)
- VMBUS_LOG(INFO, "Device %s is not NUMA-aware, defaulting socket to 0",
- guid);
- dev->device.numa_node = 0;
- }
+ if (dev->device.numa_node < 0 && rte_socket_count() > 1)
+ VMBUS_LOG(INFO, "Device %s is not NUMA-aware", guid);
/* call the driver probe() function */
VMBUS_LOG(INFO, " probe driver: %s", dr->driver.name);
--
2.30.2
next reply other threads:[~2022-09-29 12:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-29 12:05 Olivier Matz [this message]
2022-09-30 7:10 ` David Marchand
2022-09-30 8:11 ` Olivier Matz
2022-10-04 14:58 ` [PATCH v2] " Olivier Matz
2022-10-05 8:52 ` David Marchand
2022-10-05 9:04 ` Olivier Matz
2022-10-05 9:32 ` Thomas Monjalon
2022-10-06 19:31 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220929120512.480-1-olivier.matz@6wind.com \
--to=olivier.matz@6wind.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=longli@microsoft.com \
--cc=mdr@ashroe.eu \
--cc=parav@nvidia.com \
--cc=sachin.saxena@oss.nxp.com \
--cc=sthemmin@microsoft.com \
--cc=xuemingl@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).