From: Dongdong Liu <liudongdong3@huawei.com>
To: <dev@dpdk.org>, <reshma.pattan@intel.com>, <thomas@monjalon.net>,
<ferruh.yigit@amd.com>, <andrew.rybchenko@oktetlabs.ru>
Cc: Dongdong Liu <liudongdong3@huawei.com>,
Min Hu <humin29@huawei.com>,
Maryam Tahhan <maryam.tahhan@intel.com>
Subject: [PATCH v10 7/8] app/procinfo: support descriptor dump
Date: Tue, 11 Oct 2022 19:18:42 +0800 [thread overview]
Message-ID: <20221011111843.3311-8-liudongdong3@huawei.com> (raw)
In-Reply-To: <20221011111843.3311-1-liudongdong3@huawei.com>
This patch support Rx/Tx descriptor dump
The command is like:
dpdk-proc-info -a xxxx:xx:xx.x --file-prefix=xxx --
--show-rx-descriptor queue_id:offset:num
dpdk-proc-info -a xxxx:xx:xx.x --file-prefix=xxx --
--show-tx-descriptor queue_id:offset:num
queue_id: A queue identifier on this port.
offset: The offset of the descriptor starting from tail.
num: The number of the descriptors to dump.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
app/proc-info/main.c | 104 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/app/proc-info/main.c b/app/proc-info/main.c
index fe8285d2ce..53e852a07c 100644
--- a/app/proc-info/main.c
+++ b/app/proc-info/main.c
@@ -117,6 +117,21 @@ static uint32_t enable_shw_rss_reta;
/* Enable show module eeprom information. */
static uint32_t enable_shw_module_eeprom;
+/* Enable dump Rx/Tx descriptor. */
+static uint32_t enable_shw_rx_desc_dump;
+static uint32_t enable_shw_tx_desc_dump;
+
+#define DESC_PARAM_NUM 3
+
+struct desc_param {
+ uint16_t queue_id; /* A queue identifier on this port. */
+ uint16_t offset; /* The offset of the descriptor starting from tail. */
+ uint16_t num; /* The number of the descriptors to dump. */
+};
+
+static struct desc_param rx_desc_param;
+static struct desc_param tx_desc_param;
+
/* display usage */
static void
proc_info_usage(const char *prgname)
@@ -148,6 +163,14 @@ proc_info_usage(const char *prgname)
" --firmware-version: to display ethdev firmware version\n"
" --show-rss-reta: to display ports redirection table\n"
" --show-module-eeprom: to display ports module eeprom information\n"
+ " --show-rx-descriptor queue_id:offset:num to display ports Rx descriptor information. "
+ "queue_id: A Rx queue identifier on this port. "
+ "offset: The offset of the descriptor starting from tail. "
+ "num: The number of the descriptors to dump.\n"
+ " --show-tx-descriptor queue_id:offset:num to display ports Tx descriptor information. "
+ "queue_id: A Tx queue identifier on this port. "
+ "offset: The offset of the descriptor starting from tail. "
+ "num: The number of the descriptors to dump.\n"
" --iter-mempool=name: iterate mempool elements to display content\n"
" --dump-regs=file-prefix: dump registers to file with the file-prefix\n",
prgname);
@@ -200,6 +223,19 @@ parse_xstats_ids(char *list, uint64_t *ids, int limit) {
return length;
}
+static int
+parse_descriptor_param(char *list, struct desc_param *desc)
+{
+ int ret;
+
+ ret = sscanf(list, "%hu:%hu:%hu", &desc->queue_id, &desc->offset,
+ &desc->num);
+ if (ret != DESC_PARAM_NUM)
+ return -EINVAL;
+
+ return 0;
+}
+
static int
proc_info_preparse_args(int argc, char **argv)
{
@@ -264,6 +300,8 @@ proc_info_parse_args(int argc, char **argv)
{"firmware-version", 0, NULL, 0},
{"show-rss-reta", 0, NULL, 0},
{"show-module-eeprom", 0, NULL, 0},
+ {"show-rx-descriptor", required_argument, NULL, 1},
+ {"show-tx-descriptor", required_argument, NULL, 1},
{NULL, 0, 0, 0}
};
@@ -367,6 +405,26 @@ proc_info_parse_args(int argc, char **argv)
return -1;
}
nb_xstats_ids = ret;
+ } else if (!strncmp(long_option[option_index].name,
+ "show-rx-descriptor", MAX_LONG_OPT_SZ)) {
+ int ret = parse_descriptor_param(optarg,
+ &rx_desc_param);
+ if (ret < 0) {
+ fprintf(stderr, "Error parsing Rx descriptor param: %s\n",
+ strerror(-ret));
+ return -1;
+ }
+ enable_shw_rx_desc_dump = 1;
+ } else if (!strncmp(long_option[option_index].name,
+ "show-tx-descriptor", MAX_LONG_OPT_SZ)) {
+ int ret = parse_descriptor_param(optarg,
+ &tx_desc_param);
+ if (ret < 0) {
+ fprintf(stderr, "Error parsing Tx descriptor param: %s\n",
+ strerror(-ret));
+ return -1;
+ }
+ enable_shw_tx_desc_dump = 1;
}
break;
default:
@@ -1644,6 +1702,48 @@ show_module_eeprom_info(void)
}
}
+static void
+nic_rx_descriptor_display(uint16_t port_id, struct desc_param *desc)
+{
+ uint16_t queue_id = desc->queue_id;
+ uint16_t offset = desc->offset;
+ uint16_t num = desc->num;
+ int ret;
+
+ snprintf(bdr_str, MAX_STRING_LEN, " show - Rx descriptor ");
+ STATS_BDR_STR(10, bdr_str);
+
+ printf("Dump ethdev Rx descriptor for port %u, queue %u, offset %u, num %u\n",
+ port_id, queue_id, offset, num);
+
+ ret = rte_eth_rx_descriptor_dump(port_id, queue_id, offset, num,
+ stdout);
+ if (ret < 0)
+ fprintf(stderr, "Error dumping ethdev Rx descriptor: %s\n",
+ strerror(-ret));
+}
+
+static void
+nic_tx_descriptor_display(uint16_t port_id, struct desc_param *desc)
+{
+ uint16_t queue_id = desc->queue_id;
+ uint16_t offset = desc->offset;
+ uint16_t num = desc->num;
+ int ret;
+
+ snprintf(bdr_str, MAX_STRING_LEN, " show - Tx descriptor ");
+ STATS_BDR_STR(10, bdr_str);
+
+ printf("Dump ethdev Tx descriptor for port %u, queue %u, offset %u, num %u\n",
+ port_id, queue_id, offset, num);
+
+ ret = rte_eth_tx_descriptor_dump(port_id, queue_id, offset, num,
+ stdout);
+ if (ret < 0)
+ fprintf(stderr, "Error dumping ethdev Tx descriptor: %s\n",
+ strerror(-ret));
+}
+
int
main(int argc, char **argv)
{
@@ -1732,6 +1832,10 @@ main(int argc, char **argv)
metrics_display(i);
#endif
+ if (enable_shw_rx_desc_dump)
+ nic_rx_descriptor_display(i, &rx_desc_param);
+ if (enable_shw_tx_desc_dump)
+ nic_tx_descriptor_display(i, &tx_desc_param);
}
#ifdef RTE_LIB_METRICS
--
2.22.0
next prev parent reply other threads:[~2022-10-11 11:21 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-22 9:12 [PATCH 0/6] app/procinfo: add some extended features Dongdong Liu
2022-07-22 9:12 ` [PATCH 1/6] app/procinfo: add version dump Dongdong Liu
2022-09-19 9:23 ` Pattan, Reshma
2022-09-20 2:35 ` Dongdong Liu
2022-07-22 9:12 ` [PATCH 2/6] app/procinfo: add RSS RETA dump Dongdong Liu
2022-07-22 9:12 ` [PATCH 3/6] app/procinfo: add module info dump Dongdong Liu
2022-07-22 9:12 ` [PATCH 4/6] app/proc-info: add dump of Rx/Tx burst mode Dongdong Liu
2022-07-22 9:12 ` [PATCH 5/6] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-07-22 9:12 ` [PATCH 6/6] doc: add some extended features in procinfo guide Dongdong Liu
2022-07-22 10:03 ` [PATCH 0/6] app/procinfo: add some extended features David Marchand
2022-07-25 11:03 ` Dongdong Liu
2022-09-17 1:12 ` Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 " Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 1/6] app/procinfo: add version dump Dongdong Liu
2022-09-20 15:21 ` Stephen Hemminger
2022-09-21 11:11 ` Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 2/6] app/procinfo: add RSS RETA dump Dongdong Liu
2022-09-20 15:24 ` Stephen Hemminger
2022-09-21 11:21 ` Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 3/6] app/procinfo: add module info dump Dongdong Liu
2022-09-20 15:22 ` Stephen Hemminger
2022-09-21 11:22 ` Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 4/6] app/proc-info: add dump of Rx/Tx burst mode Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 5/6] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-09-20 10:51 ` [PATCH v2 6/6] doc: add some extended features in procinfo guide Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 0/7] app/procinfo: add some extended features Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 1/7] app/procinfo: add dpdk version dump Dongdong Liu
2022-09-23 9:11 ` Pattan, Reshma
2022-09-21 14:26 ` [PATCH v3 2/7] app/procinfo: add firmware " Dongdong Liu
2022-09-23 9:22 ` Pattan, Reshma
2022-09-24 8:03 ` Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 3/7] app/procinfo: add RSS RETA dump Dongdong Liu
2022-09-23 9:42 ` Pattan, Reshma
2022-09-21 14:26 ` [PATCH v3 4/7] app/procinfo: add module info dump Dongdong Liu
2022-09-23 9:51 ` Pattan, Reshma
2022-09-24 8:07 ` Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 5/7] app/procinfo: add dump of Rx/Tx burst mode Dongdong Liu
2022-09-23 10:02 ` Pattan, Reshma
2022-09-24 8:06 ` Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 6/7] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-09-23 7:53 ` Pattan, Reshma
2022-09-24 8:12 ` Dongdong Liu
2022-09-21 14:26 ` [PATCH v3 7/7] doc: add some extended features in procinfo guide Dongdong Liu
2022-09-23 8:57 ` Pattan, Reshma
2022-09-24 8:13 ` [PATCH v7 0/7] app/procinfo: add some extended features Dongdong Liu
2022-09-24 8:13 ` [PATCH v7 1/7] app/procinfo: add dpdk version dump Dongdong Liu
2022-09-24 8:13 ` [PATCH v7 2/7] app/procinfo: add firmware " Dongdong Liu
2022-09-24 8:13 ` [PATCH v7 3/7] app/procinfo: add RSS RETA dump Dongdong Liu
2022-09-24 8:13 ` [PATCH v7 4/7] app/procinfo: add module eeprom info dump Dongdong Liu
2022-09-26 11:54 ` Pattan, Reshma
2022-09-24 8:13 ` [PATCH v7 5/7] app/procinfo: add dump of Rx/Tx burst mode Dongdong Liu
2022-09-24 8:13 ` [PATCH v7 6/7] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-09-26 12:09 ` Pattan, Reshma
2022-09-24 8:13 ` [PATCH v7 7/7] doc: add some extended features in procinfo guide Dongdong Liu
2022-09-24 8:21 ` [PATCH v7 0/7] app/procinfo: add some extended features Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 0/8] " Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 1/8] app/procinfo: add dpdk version dump Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 2/8] app/procinfo: add firmware " Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 3/8] app/procinfo: add RSS RETA dump Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 4/8] app/procinfo: add module eeprom info dump Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 5/8] app/procinfo: add dump of Rx/Tx burst mode Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 6/8] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 7/8] app/procinfo: support descriptor dump Dongdong Liu
2022-10-08 9:39 ` [PATCH v8 8/8] doc: add some extended features in procinfo guide Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 0/8] app/procinfo: add some extended features Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 1/8] app/procinfo: add dpdk version dump Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 2/8] app/procinfo: add firmware " Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 3/8] app/procinfo: add RSS RETA dump Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 4/8] app/procinfo: add module eeprom info dump Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 5/8] app/procinfo: add dump of Rx/Tx burst mode Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 6/8] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 7/8] app/procinfo: support descriptor dump Dongdong Liu
2022-10-10 9:08 ` Pattan, Reshma
2022-10-10 13:13 ` Dongdong Liu
2022-10-08 10:53 ` [PATCH v9 8/8] doc: add some extended features in procinfo guide Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 0/8] app/procinfo: add some extended features Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 1/8] app/procinfo: add dpdk version dump Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 2/8] app/procinfo: add firmware " Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 3/8] app/procinfo: add RSS RETA dump Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 4/8] app/procinfo: add module eeprom info dump Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 5/8] app/procinfo: add dump of Rx/Tx burst mode Dongdong Liu
2022-10-11 11:18 ` [PATCH v10 6/8] app/procinfo: fix some wrong doxygen syntax Dongdong Liu
2022-10-11 11:18 ` Dongdong Liu [this message]
2022-10-11 13:38 ` [PATCH v10 7/8] app/procinfo: support descriptor dump Pattan, Reshma
2022-10-11 11:18 ` [PATCH v10 8/8] doc: add some extended features in procinfo guide Dongdong Liu
2022-10-20 7:48 ` [PATCH v10 0/8] app/procinfo: add some extended features Dongdong Liu
2022-11-04 9:16 ` Dongdong Liu
2022-11-15 9:52 ` David Marchand
2022-11-15 11:00 ` Dongdong Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011111843.3311-8-liudongdong3@huawei.com \
--to=liudongdong3@huawei.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=humin29@huawei.com \
--cc=maryam.tahhan@intel.com \
--cc=reshma.pattan@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).