From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, gakhil@marvell.com, maxime.coquelin@redhat.com
Cc: trix@redhat.com, mdr@ashroe.eu, bruce.richardson@intel.com,
hemant.agrawal@nxp.com, david.marchand@redhat.com,
stephen@networkplumber.org, hernan.vargas@intel.com,
Nic Chautru <nicolas.chautru@intel.com>
Subject: [PATCH v11 08/16] baseband/acc: add LDPC processing functions
Date: Tue, 11 Oct 2022 14:43:30 -0700 [thread overview]
Message-ID: <20221011214338.15034-9-nicolas.chautru@intel.com> (raw)
In-Reply-To: <20221011214338.15034-1-nicolas.chautru@intel.com>
From: Nic Chautru <nicolas.chautru@intel.com>
Added LDPC encode and decode processing functions.
Signed-off-by: Nic Chautru <nicolas.chautru@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/baseband/acc/acc_common.h | 84 ++
drivers/baseband/acc/rte_acc200_pmd.c | 1320 ++++++++++++++++++++++++-
2 files changed, 1399 insertions(+), 5 deletions(-)
diff --git a/drivers/baseband/acc/acc_common.h b/drivers/baseband/acc/acc_common.h
index 80c6637290..35bd628e6c 100644
--- a/drivers/baseband/acc/acc_common.h
+++ b/drivers/baseband/acc/acc_common.h
@@ -1302,4 +1302,88 @@ acc_pci_remove(struct rte_pci_device *pci_dev)
return 0;
}
+static inline void
+acc_enqueue_status(struct rte_bbdev_queue_data *q_data,
+ enum rte_bbdev_enqueue_status status)
+{
+ q_data->enqueue_status = status;
+ q_data->queue_stats.enqueue_status_count[status]++;
+
+ rte_acc_log(WARNING, "Enqueue Status: %s %#"PRIx64"",
+ rte_bbdev_enqueue_status_str(status),
+ q_data->queue_stats.enqueue_status_count[status]);
+}
+
+static inline void
+acc_enqueue_invalid(struct rte_bbdev_queue_data *q_data)
+{
+ acc_enqueue_status(q_data, RTE_BBDEV_ENQ_STATUS_INVALID_OP);
+}
+
+static inline void
+acc_enqueue_ring_full(struct rte_bbdev_queue_data *q_data)
+{
+ acc_enqueue_status(q_data, RTE_BBDEV_ENQ_STATUS_RING_FULL);
+}
+
+static inline void
+acc_enqueue_queue_full(struct rte_bbdev_queue_data *q_data)
+{
+ acc_enqueue_status(q_data, RTE_BBDEV_ENQ_STATUS_QUEUE_FULL);
+}
+
+/* Number of available descriptor in ring to enqueue */
+static inline uint32_t
+acc_ring_avail_enq(struct acc_queue *q)
+{
+ return (q->sw_ring_depth - 1 + q->sw_ring_tail - q->sw_ring_head) & q->sw_ring_wrap_mask;
+}
+
+/* Number of available descriptor in ring to dequeue */
+static inline uint32_t
+acc_ring_avail_deq(struct acc_queue *q)
+{
+ return (q->sw_ring_depth + q->sw_ring_head - q->sw_ring_tail) & q->sw_ring_wrap_mask;
+}
+
+/* Check room in AQ for the enqueues batches into Qmgr */
+static inline int32_t
+acc_aq_avail(struct rte_bbdev_queue_data *q_data, uint16_t num_ops)
+{
+ struct acc_queue *q = q_data->queue_private;
+ int32_t aq_avail = q->aq_depth -
+ ((q->aq_enqueued - q->aq_dequeued +
+ ACC_MAX_QUEUE_DEPTH) % ACC_MAX_QUEUE_DEPTH)
+ - (num_ops >> 7);
+ if (aq_avail <= 0)
+ acc_enqueue_queue_full(q_data);
+ return aq_avail;
+}
+
+/* Calculates number of CBs in processed encoder TB based on 'r' and input
+ * length.
+ */
+static inline uint8_t
+get_num_cbs_in_tb_ldpc_enc(struct rte_bbdev_op_ldpc_enc *ldpc_enc)
+{
+ uint8_t c, r, crc24_bits = 0;
+ uint16_t k = (ldpc_enc->basegraph == 1 ? 22 : 10) * ldpc_enc->z_c
+ - ldpc_enc->n_filler;
+ uint8_t cbs_in_tb = 0;
+ int32_t length;
+
+ length = ldpc_enc->input.length;
+ r = ldpc_enc->tb_params.r;
+ c = ldpc_enc->tb_params.c;
+ crc24_bits = 0;
+ if (check_bit(ldpc_enc->op_flags, RTE_BBDEV_LDPC_CRC_24B_ATTACH))
+ crc24_bits = 24;
+ while (length > 0 && r < c) {
+ length -= (k - crc24_bits) >> 3;
+ r++;
+ cbs_in_tb++;
+ }
+ return cbs_in_tb;
+}
+
#endif /* _ACC_COMMON_H_ */
diff --git a/drivers/baseband/acc/rte_acc200_pmd.c b/drivers/baseband/acc/rte_acc200_pmd.c
index dafcafda60..049da53ac3 100644
--- a/drivers/baseband/acc/rte_acc200_pmd.c
+++ b/drivers/baseband/acc/rte_acc200_pmd.c
@@ -564,15 +564,51 @@ acc200_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
return ret;
}
+static inline void
+acc200_print_op(struct rte_bbdev_dec_op *op, enum rte_bbdev_op_type op_type,
+ uint16_t index)
+{
+ if (op == NULL)
+ return;
+ if (op_type == RTE_BBDEV_OP_LDPC_DEC)
+ rte_bbdev_log(INFO,
+ " Op 5GUL %d %d %d %d %d %d %d %d %d %d %d %d",
+ index,
+ op->ldpc_dec.basegraph, op->ldpc_dec.z_c,
+ op->ldpc_dec.n_cb, op->ldpc_dec.q_m,
+ op->ldpc_dec.n_filler, op->ldpc_dec.cb_params.e,
+ op->ldpc_dec.op_flags, op->ldpc_dec.rv_index,
+ op->ldpc_dec.iter_max, op->ldpc_dec.iter_count,
+ op->ldpc_dec.harq_combined_input.length
+ );
+ else if (op_type == RTE_BBDEV_OP_LDPC_ENC) {
+ struct rte_bbdev_enc_op *op_dl = (struct rte_bbdev_enc_op *) op;
+ rte_bbdev_log(INFO,
+ " Op 5GDL %d %d %d %d %d %d %d %d %d",
+ index,
+ op_dl->ldpc_enc.basegraph, op_dl->ldpc_enc.z_c,
+ op_dl->ldpc_enc.n_cb, op_dl->ldpc_enc.q_m,
+ op_dl->ldpc_enc.n_filler, op_dl->ldpc_enc.cb_params.e,
+ op_dl->ldpc_enc.op_flags, op_dl->ldpc_enc.rv_index
+ );
+ }
+}
+
/* Stop ACC200 queue and clear counters. */
static int
acc200_queue_stop(struct rte_bbdev *dev, uint16_t queue_id)
{
struct acc_queue *q;
+ struct rte_bbdev_dec_op *op;
+ uint16_t i;
q = dev->data->queues[queue_id].queue_private;
rte_bbdev_log(INFO, "Queue Stop %d H/T/D %d %d %x OpType %d",
queue_id, q->sw_ring_head, q->sw_ring_tail,
q->sw_ring_depth, q->op_type);
+ for (i = 0; i < q->sw_ring_depth; ++i) {
+ op = (q->ring_addr + i)->req.op_addr;
+ acc200_print_op(op, q->op_type, i);
+ }
/* ignore all operations in flight and clear counters */
q->sw_ring_tail = q->sw_ring_head;
q->aq_enqueued = 0;
@@ -614,6 +650,43 @@ acc200_dev_info_get(struct rte_bbdev *dev,
struct acc_device *d = dev->data->dev_private;
int i;
static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
+ {
+ .type = RTE_BBDEV_OP_LDPC_ENC,
+ .cap.ldpc_enc = {
+ .capability_flags =
+ RTE_BBDEV_LDPC_RATE_MATCH |
+ RTE_BBDEV_LDPC_CRC_24B_ATTACH |
+ RTE_BBDEV_LDPC_INTERLEAVER_BYPASS,
+ .num_buffers_src =
+ RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+ .num_buffers_dst =
+ RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+ }
+ },
+ {
+ .type = RTE_BBDEV_OP_LDPC_DEC,
+ .cap.ldpc_dec = {
+ .capability_flags =
+ RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK |
+ RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP |
+ RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK |
+ RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK |
+ RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE |
+ RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE |
+ RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE |
+ RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS |
+ RTE_BBDEV_LDPC_DEC_SCATTER_GATHER |
+ RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION |
+ RTE_BBDEV_LDPC_LLR_COMPRESSION,
+ .llr_size = 8,
+ .llr_decimals = 1,
+ .num_buffers_src =
+ RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+ .num_buffers_hard_out =
+ RTE_BBDEV_LDPC_MAX_CODE_BLOCKS,
+ .num_buffers_soft_out = 0,
+ }
+ },
RTE_BBDEV_END_OF_CAPABILITIES_LIST()
};
@@ -630,13 +703,15 @@ acc200_dev_info_get(struct rte_bbdev *dev,
dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = 0;
dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = 0;
- dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = 0;
- dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = 0;
+ dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = d->acc_conf.q_ul_5g.num_aqs_per_groups *
+ d->acc_conf.q_ul_5g.num_qgroups;
+ dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = d->acc_conf.q_dl_5g.num_aqs_per_groups *
+ d->acc_conf.q_dl_5g.num_qgroups;
dev_info->num_queues[RTE_BBDEV_OP_FFT] = 0;
dev_info->queue_priority[RTE_BBDEV_OP_TURBO_DEC] = 0;
dev_info->queue_priority[RTE_BBDEV_OP_TURBO_ENC] = 0;
- dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = 0;
- dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = 0;
+ dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = d->acc_conf.q_ul_5g.num_qgroups;
+ dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = d->acc_conf.q_dl_5g.num_qgroups;
dev_info->queue_priority[RTE_BBDEV_OP_FFT] = 0;
dev_info->max_num_queues = 0;
for (i = RTE_BBDEV_OP_NONE; i <= RTE_BBDEV_OP_FFT; i++)
@@ -679,13 +754,1248 @@ static struct rte_pci_id pci_id_acc200_vf_map[] = {
{.device_id = 0},
};
-/* Initialization Function. */
+/* Fill in a frame control word for LDPC decoding. */
+static inline void
+acc200_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
+ union acc_harq_layout_data *harq_layout)
+{
+ uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
+ uint32_t harq_index;
+ uint32_t l;
+
+ fcw->qm = op->ldpc_dec.q_m;
+ fcw->nfiller = op->ldpc_dec.n_filler;
+ fcw->BG = (op->ldpc_dec.basegraph - 1);
+ fcw->Zc = op->ldpc_dec.z_c;
+ fcw->ncb = op->ldpc_dec.n_cb;
+ fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_dec.basegraph,
+ op->ldpc_dec.rv_index);
+ if (op->ldpc_dec.code_block_mode == RTE_BBDEV_CODE_BLOCK)
+ fcw->rm_e = op->ldpc_dec.cb_params.e;
+ else
+ fcw->rm_e = (op->ldpc_dec.tb_params.r <
+ op->ldpc_dec.tb_params.cab) ?
+ op->ldpc_dec.tb_params.ea :
+ op->ldpc_dec.tb_params.eb;
+
+ if (unlikely(check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE) &&
+ (op->ldpc_dec.harq_combined_input.length == 0))) {
+ rte_bbdev_log(WARNING, "Null HARQ input size provided");
+ /* Disable HARQ input in that case to carry forward. */
+ op->ldpc_dec.op_flags ^= RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE;
+ }
+ if (unlikely(fcw->rm_e == 0)) {
+ rte_bbdev_log(WARNING, "Null E input provided");
+ fcw->rm_e = 2;
+ }
+
+ fcw->hcin_en = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
+ fcw->hcout_en = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE);
+ fcw->crc_select = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
+ fcw->bypass_dec = 0;
+ fcw->bypass_intlv = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS);
+ if (op->ldpc_dec.q_m == 1) {
+ fcw->bypass_intlv = 1;
+ fcw->qm = 2;
+ }
+ fcw->hcin_decomp_mode = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
+ fcw->hcout_comp_mode = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
+ fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_LLR_COMPRESSION);
+ harq_index = hq_index(op->ldpc_dec.harq_combined_output.offset);
+
+ if (fcw->hcin_en > 0) {
+ harq_in_length = op->ldpc_dec.harq_combined_input.length;
+ if (fcw->hcin_decomp_mode > 0)
+ harq_in_length = harq_in_length * 8 / 6;
+ harq_in_length = RTE_MIN(harq_in_length, op->ldpc_dec.n_cb
+ - op->ldpc_dec.n_filler);
+ harq_in_length = RTE_ALIGN_CEIL(harq_in_length, 64);
+ fcw->hcin_size0 = harq_in_length;
+ fcw->hcin_offset = 0;
+ fcw->hcin_size1 = 0;
+ } else {
+ fcw->hcin_size0 = 0;
+ fcw->hcin_offset = 0;
+ fcw->hcin_size1 = 0;
+ }
+
+ fcw->itmax = op->ldpc_dec.iter_max;
+ fcw->itstop = check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
+ fcw->cnu_algo = ACC_ALGO_MSA;
+ fcw->synd_precoder = fcw->itstop;
+ /*
+ * These are all implicitly set:
+ * fcw->synd_post = 0;
+ * fcw->so_en = 0;
+ * fcw->so_bypass_rm = 0;
+ * fcw->so_bypass_intlv = 0;
+ * fcw->dec_convllr = 0;
+ * fcw->hcout_convllr = 0;
+ * fcw->hcout_size1 = 0;
+ * fcw->so_it = 0;
+ * fcw->hcout_offset = 0;
+ * fcw->negstop_th = 0;
+ * fcw->negstop_it = 0;
+ * fcw->negstop_en = 0;
+ * fcw->gain_i = 1;
+ * fcw->gain_h = 1;
+ */
+ if (fcw->hcout_en > 0) {
+ parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8)
+ * op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
+ k0_p = (fcw->k0 > parity_offset) ? fcw->k0 - op->ldpc_dec.n_filler : fcw->k0;
+ ncb_p = fcw->ncb - op->ldpc_dec.n_filler;
+ l = k0_p + fcw->rm_e;
+ harq_out_length = (uint16_t) fcw->hcin_size0;
+ harq_out_length = RTE_MIN(RTE_MAX(harq_out_length, l), ncb_p);
+ harq_out_length = RTE_ALIGN_CEIL(harq_out_length, 64);
+ fcw->hcout_size0 = harq_out_length;
+ fcw->hcout_size1 = 0;
+ fcw->hcout_offset = 0;
+ harq_layout[harq_index].offset = fcw->hcout_offset;
+ harq_layout[harq_index].size0 = fcw->hcout_size0;
+ } else {
+ fcw->hcout_size0 = 0;
+ fcw->hcout_size1 = 0;
+ fcw->hcout_offset = 0;
+ }
+
+ fcw->tb_crc_select = 0;
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK))
+ fcw->tb_crc_select = 2;
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK))
+ fcw->tb_crc_select = 1;
+}
+
+static inline int
+acc200_dma_desc_ld_fill(struct rte_bbdev_dec_op *op, struct acc_dma_req_desc *desc,
+ struct rte_mbuf **input, struct rte_mbuf *h_output,
+ uint32_t *in_offset, uint32_t *h_out_offset,
+ uint32_t *h_out_length, uint32_t *mbuf_total_left,
+ uint32_t *seg_total_left, struct acc_fcw_ld *fcw)
+{
+ struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec;
+ int next_triplet = 1; /* FCW already done. */
+ uint32_t input_length;
+ uint16_t output_length, crc24_overlap = 0;
+ uint16_t sys_cols, K, h_p_size, h_np_size;
+ bool h_comp = check_bit(dec->op_flags, RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
+
+ acc_header_init(desc);
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP))
+ crc24_overlap = 24;
+
+ /* Compute some LDPC BG lengths. */
+ input_length = fcw->rm_e;
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_LLR_COMPRESSION))
+ input_length = (input_length * 3 + 3) / 4;
+ sys_cols = (dec->basegraph == 1) ? 22 : 10;
+ K = sys_cols * dec->z_c;
+ output_length = K - dec->n_filler - crc24_overlap;
+
+ if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < input_length))) {
+ rte_bbdev_log(ERR,
+ "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+ *mbuf_total_left, input_length);
+ return -1;
+ }
+
+ next_triplet = acc_dma_fill_blk_type_in(desc, input,
+ in_offset, input_length,
+ seg_total_left, next_triplet,
+ check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_DEC_SCATTER_GATHER));
+
+ if (unlikely(next_triplet < 0)) {
+ rte_bbdev_log(ERR,
+ "Mismatch between data to process and mbuf data length in bbdev_op: %p",
+ op);
+ return -1;
+ }
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
+ if (op->ldpc_dec.harq_combined_input.data == 0) {
+ rte_bbdev_log(ERR, "HARQ input is not defined");
+ return -1;
+ }
+ h_p_size = fcw->hcin_size0 + fcw->hcin_size1;
+ if (h_comp)
+ h_p_size = (h_p_size * 3 + 3) / 4;
+ if (op->ldpc_dec.harq_combined_input.data == 0) {
+ rte_bbdev_log(ERR, "HARQ input is not defined");
+ return -1;
+ }
+ acc_dma_fill_blk_type(
+ desc,
+ op->ldpc_dec.harq_combined_input.data,
+ op->ldpc_dec.harq_combined_input.offset,
+ h_p_size,
+ next_triplet,
+ ACC_DMA_BLKID_IN_HARQ);
+ next_triplet++;
+ }
+
+ desc->data_ptrs[next_triplet - 1].last = 1;
+ desc->m2dlen = next_triplet;
+ *mbuf_total_left -= input_length;
+
+ next_triplet = acc_dma_fill_blk_type(desc, h_output,
+ *h_out_offset, output_length >> 3, next_triplet,
+ ACC_DMA_BLKID_OUT_HARD);
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
+ if (op->ldpc_dec.harq_combined_output.data == 0) {
+ rte_bbdev_log(ERR, "HARQ output is not defined");
+ return -1;
+ }
+
+ /* Pruned size of the HARQ. */
+ h_p_size = fcw->hcout_size0 + fcw->hcout_size1;
+ /* Non-Pruned size of the HARQ. */
+ h_np_size = fcw->hcout_offset > 0 ?
+ fcw->hcout_offset + fcw->hcout_size1 :
+ h_p_size;
+ if (h_comp) {
+ h_np_size = (h_np_size * 3 + 3) / 4;
+ h_p_size = (h_p_size * 3 + 3) / 4;
+ }
+ dec->harq_combined_output.length = h_np_size;
+ acc_dma_fill_blk_type(
+ desc,
+ dec->harq_combined_output.data,
+ dec->harq_combined_output.offset,
+ h_p_size,
+ next_triplet,
+ ACC_DMA_BLKID_OUT_HARQ);
+
+ next_triplet++;
+ }
+
+ *h_out_length = output_length >> 3;
+ dec->hard_output.length += *h_out_length;
+ *h_out_offset += *h_out_length;
+ desc->data_ptrs[next_triplet - 1].last = 1;
+ desc->d2mlen = next_triplet - desc->m2dlen;
+
+ desc->op_addr = op;
+
+ return 0;
+}
+
+static inline void
+acc200_dma_desc_ld_update(struct rte_bbdev_dec_op *op,
+ struct acc_dma_req_desc *desc,
+ struct rte_mbuf *input, struct rte_mbuf *h_output,
+ uint32_t *in_offset, uint32_t *h_out_offset,
+ uint32_t *h_out_length,
+ union acc_harq_layout_data *harq_layout)
+{
+ int next_triplet = 1; /* FCW already done. */
+ desc->data_ptrs[next_triplet].address = rte_pktmbuf_iova_offset(input, *in_offset);
+ next_triplet++;
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
+ struct rte_bbdev_op_data hi = op->ldpc_dec.harq_combined_input;
+ desc->data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(hi.data, hi.offset);
+ next_triplet++;
+ }
+
+ desc->data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(h_output, *h_out_offset);
+ *h_out_length = desc->data_ptrs[next_triplet].blen;
+ next_triplet++;
+
+ if (check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
+ /* Adjust based on previous operation. */
+ struct rte_bbdev_dec_op *prev_op = desc->op_addr;
+ op->ldpc_dec.harq_combined_output.length =
+ prev_op->ldpc_dec.harq_combined_output.length;
+ uint32_t harq_idx = hq_index(op->ldpc_dec.harq_combined_output.offset);
+ uint32_t prev_harq_idx = hq_index(prev_op->ldpc_dec.harq_combined_output.offset);
+ harq_layout[harq_idx].val = harq_layout[prev_harq_idx].val;
+ struct rte_bbdev_op_data ho = op->ldpc_dec.harq_combined_output;
+ desc->data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(ho.data, ho.offset);
+ next_triplet++;
+ }
+
+ op->ldpc_dec.hard_output.length += *h_out_length;
+ desc->op_addr = op;
+}
+
+/* Enqueue one encode operations for ACC200 device in CB mode
+ * multiplexed on the same descriptor.
+ */
+static inline int
+enqueue_ldpc_enc_n_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op **ops,
+ uint16_t total_enqueued_descs, int16_t num)
+{
+ union acc_dma_desc *desc = NULL;
+ uint32_t out_length;
+ struct rte_mbuf *output_head, *output;
+ int i, next_triplet;
+ uint16_t in_length_in_bytes;
+ struct rte_bbdev_op_ldpc_enc *enc = &ops[0]->ldpc_enc;
+
+ uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_descs)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ acc_fcw_le_fill(ops[0], &desc->req.fcw_le, num, 0);
+
+ /** This could be done at polling. */
+ acc_header_init(&desc->req);
+ desc->req.numCBs = num;
+
+ in_length_in_bytes = ops[0]->ldpc_enc.input.data->data_len;
+ out_length = (enc->cb_params.e + 7) >> 3;
+ desc->req.m2dlen = 1 + num;
+ desc->req.d2mlen = num;
+ next_triplet = 1;
+
+ for (i = 0; i < num; i++) {
+ desc->req.data_ptrs[next_triplet].address =
+ rte_pktmbuf_iova_offset(ops[i]->ldpc_enc.input.data, 0);
+ desc->req.data_ptrs[next_triplet].blen = in_length_in_bytes;
+ next_triplet++;
+ desc->req.data_ptrs[next_triplet].address = rte_pktmbuf_iova_offset(
+ ops[i]->ldpc_enc.output.data, 0);
+ desc->req.data_ptrs[next_triplet].blen = out_length;
+ next_triplet++;
+ ops[i]->ldpc_enc.output.length = out_length;
+ output_head = output = ops[i]->ldpc_enc.output.data;
+ mbuf_append(output_head, output, out_length);
+ output->data_len = out_length;
+ }
+
+ desc->req.op_addr = ops[0];
+ /* Keep track of pointers even when multiplexed in single descriptor. */
+ struct acc_ptrs *context_ptrs = q->companion_ring_addr + desc_idx;
+ for (i = 0; i < num; i++)
+ context_ptrs->ptr[i].op_addr = ops[i];
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ rte_memdump(stderr, "FCW", &desc->req.fcw_le,
+ sizeof(desc->req.fcw_le) - 8);
+ rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+ /* Number of compatible CBs/ops successfully prepared to enqueue. */
+ return num;
+}
+
+/* Enqueue one encode operations for ACC200 device for a partial TB
+ * all codes blocks have same configuration multiplexed on the same descriptor.
+ */
+static inline void
+enqueue_ldpc_enc_part_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+ uint16_t total_enqueued_descs, int16_t num_cbs, uint32_t e,
+ uint16_t in_len_B, uint32_t out_len_B, uint32_t *in_offset,
+ uint32_t *out_offset)
+{
+
+ union acc_dma_desc *desc = NULL;
+ struct rte_mbuf *output_head, *output;
+ int i, next_triplet;
+ struct rte_bbdev_op_ldpc_enc *enc = &op->ldpc_enc;
+
+
+ uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_descs) & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ acc_fcw_le_fill(op, &desc->req.fcw_le, num_cbs, e);
+
+ /** This could be done at polling. */
+ acc_header_init(&desc->req);
+ desc->req.numCBs = num_cbs;
+
+ desc->req.m2dlen = 1 + num_cbs;
+ desc->req.d2mlen = num_cbs;
+ next_triplet = 1;
+
+ for (i = 0; i < num_cbs; i++) {
+ desc->req.data_ptrs[next_triplet].address = rte_pktmbuf_iova_offset(
+ enc->input.data, *in_offset);
+ *in_offset += in_len_B;
+ desc->req.data_ptrs[next_triplet].blen = in_len_B;
+ next_triplet++;
+ desc->req.data_ptrs[next_triplet].address = rte_pktmbuf_iova_offset(
+ enc->output.data, *out_offset);
+ *out_offset += out_len_B;
+ desc->req.data_ptrs[next_triplet].blen = out_len_B;
+ next_triplet++;
+ enc->output.length += out_len_B;
+ output_head = output = enc->output.data;
+ mbuf_append(output_head, output, out_len_B);
+ }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ rte_memdump(stderr, "FCW", &desc->req.fcw_le,
+ sizeof(desc->req.fcw_le) - 8);
+ rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+}
+
+/* Enqueue one encode operations for ACC200 device in TB mode.
+ * returns the number of descs used.
+ */
+static inline int
+enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+ uint16_t enq_descs, uint8_t cbs_in_tb)
+{
+ uint8_t num_a, num_b;
+ uint16_t desc_idx, input_len_B, return_descs;
+ uint8_t r = op->ldpc_enc.tb_params.r;
+ uint8_t cab = op->ldpc_enc.tb_params.cab;
+ union acc_dma_desc *desc;
+ uint16_t init_enq_descs = enq_descs;
+ uint32_t in_offset = 0, out_offset = 0;
+
+ input_len_B = ((op->ldpc_enc.basegraph == 1 ? 22 : 10) * op->ldpc_enc.z_c) >> 3;
+
+ if (check_bit(op->ldpc_enc.op_flags, RTE_BBDEV_LDPC_CRC_24B_ATTACH))
+ input_len_B -= 3;
+
+ if (r < cab) {
+ num_a = cab - r;
+ num_b = cbs_in_tb - cab;
+ } else {
+ num_a = 0;
+ num_b = cbs_in_tb - r;
+ }
+
+ while (num_a > 0) {
+ uint32_t e = op->ldpc_enc.tb_params.ea;
+ uint32_t out_len_B = (e + 7) >> 3;
+ uint8_t enq = RTE_MIN(num_a, ACC_MUX_5GDL_DESC);
+ num_a -= enq;
+ enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+ out_len_B, &in_offset, &out_offset);
+ enq_descs++;
+ }
+ while (num_b > 0) {
+ uint32_t e = op->ldpc_enc.tb_params.eb;
+ uint32_t out_len_B = (e + 7) >> 3;
+ uint8_t enq = RTE_MIN(num_b, ACC_MUX_5GDL_DESC);
+ num_b -= enq;
+ enqueue_ldpc_enc_part_tb(q, op, enq_descs, enq, e, input_len_B,
+ out_len_B, &in_offset, &out_offset);
+ enq_descs++;
+ }
+
+ return_descs = enq_descs - init_enq_descs;
+ /* Keep total number of CBs in first TB. */
+ desc_idx = ((q->sw_ring_head + init_enq_descs)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ desc->req.cbs_in_tb = return_descs; /** Actual number of descriptors. */
+ desc->req.op_addr = op;
+
+ /* Set SDone on last CB descriptor for TB mode. */
+ desc_idx = ((q->sw_ring_head + enq_descs - 1)
+ & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ desc->req.sdone_enable = 1;
+ desc->req.irq_enable = q->irq_enable;
+ desc->req.op_addr = op;
+ return return_descs;
+}
+
+/** Enqueue one decode operations for ACC200 device in CB mode. */
+static inline int
+enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
+ uint16_t total_enqueued_cbs, bool same_op)
+{
+ int ret, hq_len;
+ union acc_dma_desc *desc;
+ uint16_t desc_idx;
+ struct rte_mbuf *input, *h_output_head, *h_output;
+ uint32_t in_offset, h_out_offset, mbuf_total_left, h_out_length = 0;
+ union acc_harq_layout_data *harq_layout;
+
+ if (op->ldpc_dec.cb_params.e == 0)
+ return -EINVAL;
+
+ desc_idx = ((q->sw_ring_head + total_enqueued_cbs) & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+
+ input = op->ldpc_dec.input.data;
+ h_output_head = h_output = op->ldpc_dec.hard_output.data;
+ in_offset = op->ldpc_dec.input.offset;
+ h_out_offset = op->ldpc_dec.hard_output.offset;
+ mbuf_total_left = op->ldpc_dec.input.length;
+ harq_layout = q->d->harq_layout;
+
+ if (same_op) {
+ union acc_dma_desc *prev_desc;
+ desc_idx = ((q->sw_ring_head + total_enqueued_cbs - 1) & q->sw_ring_wrap_mask);
+ prev_desc = q->ring_addr + desc_idx;
+ uint8_t *prev_ptr = (uint8_t *) prev_desc;
+ uint8_t *new_ptr = (uint8_t *) desc;
+ /* Copy first 4 words and BDESCs. */
+ rte_memcpy(new_ptr, prev_ptr, ACC_5GUL_SIZE_0);
+ rte_memcpy(new_ptr + ACC_5GUL_OFFSET_0,
+ prev_ptr + ACC_5GUL_OFFSET_0,
+ ACC_5GUL_SIZE_1);
+ desc->req.op_addr = prev_desc->req.op_addr;
+ /* Copy FCW. */
+ rte_memcpy(new_ptr + ACC_DESC_FCW_OFFSET,
+ prev_ptr + ACC_DESC_FCW_OFFSET,
+ ACC_FCW_LD_BLEN);
+ acc200_dma_desc_ld_update(op, &desc->req, input, h_output,
+ &in_offset, &h_out_offset,
+ &h_out_length, harq_layout);
+ } else {
+ struct acc_fcw_ld *fcw;
+ uint32_t seg_total_left;
+ fcw = &desc->req.fcw_ld;
+ acc200_fcw_ld_fill(op, fcw, harq_layout);
+
+ /* Special handling when using mbuf or not. */
+ if (check_bit(op->ldpc_dec.op_flags,
+ RTE_BBDEV_LDPC_DEC_SCATTER_GATHER))
+ seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
+ else
+ seg_total_left = fcw->rm_e;
+
+ ret = acc200_dma_desc_ld_fill(op, &desc->req, &input, h_output,
+ &in_offset, &h_out_offset,
+ &h_out_length, &mbuf_total_left,
+ &seg_total_left, fcw);
+ if (unlikely(ret < 0))
+ return ret;
+ }
+
+ /* Hard output. */
+ mbuf_append(h_output_head, h_output, h_out_length);
+ if (op->ldpc_dec.harq_combined_output.length > 0) {
+ /* Push the HARQ output into host memory. */
+ struct rte_mbuf *hq_output_head, *hq_output;
+ hq_output_head = op->ldpc_dec.harq_combined_output.data;
+ hq_output = op->ldpc_dec.harq_combined_output.data;
+ hq_len = op->ldpc_dec.harq_combined_output.length;
+ if (unlikely(!mbuf_append(hq_output_head, hq_output, hq_len))) {
+ rte_bbdev_log(ERR, "HARQ output mbuf issue %d %d\n",
+ hq_output->buf_len,
+ hq_len);
+ return -1;
+ }
+ }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ rte_memdump(stderr, "FCW", &desc->req.fcw_ld,
+ sizeof(desc->req.fcw_ld) - 8);
+ rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+ /* One CB (one op) was successfully prepared to enqueue. */
+ return 1;
+}
+
+
+/* Enqueue one decode operations for ACC200 device in TB mode. */
+static inline int
+enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
+ uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
+{
+ union acc_dma_desc *desc = NULL;
+ union acc_dma_desc *desc_first = NULL;
+ int ret;
+ uint8_t r, c;
+ uint32_t in_offset, h_out_offset, h_out_length, mbuf_total_left, seg_total_left;
+ struct rte_mbuf *input, *h_output_head, *h_output;
+ uint16_t current_enqueued_cbs = 0;
+ uint16_t sys_cols, trail_len = 0;
+
+ uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs) & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ desc_first = desc;
+ uint64_t fcw_offset = (desc_idx << 8) + ACC_DESC_FCW_OFFSET;
+ union acc_harq_layout_data *harq_layout = q->d->harq_layout;
+ acc200_fcw_ld_fill(op, &desc->req.fcw_ld, harq_layout);
+
+ input = op->ldpc_dec.input.data;
+ h_output_head = h_output = op->ldpc_dec.hard_output.data;
+ in_offset = op->ldpc_dec.input.offset;
+ h_out_offset = op->ldpc_dec.hard_output.offset;
+ h_out_length = 0;
+ mbuf_total_left = op->ldpc_dec.input.length;
+ c = op->ldpc_dec.tb_params.c;
+ r = op->ldpc_dec.tb_params.r;
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK)) {
+ sys_cols = (op->ldpc_dec.basegraph == 1) ? 22 : 10;
+ trail_len = sys_cols * op->ldpc_dec.z_c -
+ op->ldpc_dec.n_filler - 24;
+ }
+
+ while (mbuf_total_left > 0 && r < c) {
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_DEC_SCATTER_GATHER))
+ seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
+ else
+ seg_total_left = op->ldpc_dec.input.length;
+ /* Set up DMA descriptor. */
+ desc_idx = ((q->sw_ring_head + total_enqueued_cbs) & q->sw_ring_wrap_mask);
+ desc = q->ring_addr + desc_idx;
+ fcw_offset = (desc_idx << 8) + ACC_DESC_FCW_OFFSET;
+ desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
+ desc->req.data_ptrs[0].blen = ACC_FCW_LD_BLEN;
+ rte_memcpy(&desc->req.fcw_ld, &desc_first->req.fcw_ld, ACC_FCW_LD_BLEN);
+ desc->req.fcw_ld.tb_trailer_size = (c - r - 1) * trail_len;
+
+ ret = acc200_dma_desc_ld_fill(op, &desc->req, &input,
+ h_output, &in_offset, &h_out_offset,
+ &h_out_length,
+ &mbuf_total_left, &seg_total_left,
+ &desc->req.fcw_ld);
+
+ if (unlikely(ret < 0))
+ return ret;
+
+ /* Hard output. */
+ mbuf_append(h_output_head, h_output, h_out_length);
+
+ /* Set total number of CBs in TB. */
+ desc->req.cbs_in_tb = cbs_in_tb;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ rte_memdump(stderr, "FCW", &desc->req.fcw_td,
+ sizeof(desc->req.fcw_td) - 8);
+ rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_DEC_SCATTER_GATHER)
+ && (seg_total_left == 0)) {
+ /* Go to the next mbuf. */
+ input = input->next;
+ in_offset = 0;
+ h_output = h_output->next;
+ h_out_offset = 0;
+ }
+ total_enqueued_cbs++;
+ current_enqueued_cbs++;
+ r++;
+ }
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+ if (check_mbuf_total_left(mbuf_total_left) != 0)
+ return -EINVAL;
+#endif
+ /* Set SDone on last CB descriptor for TB mode. */
+ desc->req.sdone_enable = 1;
+ desc->req.irq_enable = q->irq_enable;
+
+ return current_enqueued_cbs;
+}
+
+/** Enqueue encode operations for ACC200 device in CB mode. */
+static inline uint16_t
+acc200_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ int32_t avail = acc_ring_avail_enq(q);
+ uint16_t i = 0;
+ union acc_dma_desc *desc;
+ int ret, desc_idx = 0;
+ int16_t enq, left = num;
+
+ while (left > 0) {
+ if (unlikely(avail < 1)) {
+ acc_enqueue_ring_full(q_data);
+ break;
+ }
+ avail--;
+ enq = RTE_MIN(left, ACC_MUX_5GDL_DESC);
+ enq = check_mux(&ops[i], enq);
+ ret = enqueue_ldpc_enc_n_op_cb(q, &ops[i], desc_idx, enq);
+ if (ret < 0) {
+ acc_enqueue_invalid(q_data);
+ break;
+ }
+ i += enq;
+ desc_idx++;
+ left = num - i;
+ }
+
+ if (unlikely(i == 0))
+ return 0; /* Nothing to enqueue. */
+
+ /* Set SDone in last CB in enqueued ops for CB mode. */
+ desc = q->ring_addr + ((q->sw_ring_head + desc_idx - 1) & q->sw_ring_wrap_mask);
+ desc->req.sdone_enable = 1;
+ desc->req.irq_enable = q->irq_enable;
+
+ acc_dma_enqueue(q, desc_idx, &q_data->queue_stats);
+
+ /* Update stats. */
+ q_data->queue_stats.enqueued_count += i;
+ q_data->queue_stats.enqueue_err_count += num - i;
+
+ return i;
+}
+
+/* Enqueue LDPC encode operations for ACC200 device in TB mode. */
+static uint16_t
+acc200_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ int32_t avail = acc_ring_avail_enq(q);
+ uint16_t i, enqueued_descs = 0;
+ uint8_t cbs_in_tb;
+ int descs_used;
+
+ for (i = 0; i < num; ++i) {
+ cbs_in_tb = get_num_cbs_in_tb_ldpc_enc(&ops[i]->ldpc_enc);
+ /* Check if there are available space for further processing. */
+ if (unlikely((avail - cbs_in_tb < 0) || (cbs_in_tb == 0))) {
+ acc_enqueue_ring_full(q_data);
+ break;
+ }
+
+ descs_used = enqueue_ldpc_enc_one_op_tb(q, ops[i], enqueued_descs, cbs_in_tb);
+ if (descs_used < 0) {
+ acc_enqueue_invalid(q_data);
+ break;
+ }
+ enqueued_descs += descs_used;
+ avail -= descs_used;
+ }
+ if (unlikely(enqueued_descs == 0))
+ return 0; /* Nothing to enqueue. */
+
+ acc_dma_enqueue(q, enqueued_descs, &q_data->queue_stats);
+
+ /* Update stats. */
+ q_data->queue_stats.enqueued_count += i;
+ q_data->queue_stats.enqueue_err_count += num - i;
+
+ return i;
+}
+
+/* Enqueue encode operations for ACC200 device. */
+static uint16_t
+acc200_enqueue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ int32_t aq_avail = acc_aq_avail(q_data, num);
+ if (unlikely((aq_avail <= 0) || (num == 0)))
+ return 0;
+ if (ops[0]->ldpc_enc.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+ return acc200_enqueue_ldpc_enc_tb(q_data, ops, num);
+ else
+ return acc200_enqueue_ldpc_enc_cb(q_data, ops, num);
+}
+
+/* Enqueue decode operations for ACC200 device in TB mode. */
+static uint16_t
+acc200_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ int32_t avail = acc_ring_avail_enq(q);
+ uint16_t i, enqueued_cbs = 0;
+ uint8_t cbs_in_tb;
+ int ret;
+
+ for (i = 0; i < num; ++i) {
+ cbs_in_tb = get_num_cbs_in_tb_ldpc_dec(&ops[i]->ldpc_dec);
+ /* Check if there are available space for further processing. */
+ if (unlikely((avail - cbs_in_tb < 0) ||
+ (cbs_in_tb == 0)))
+ break;
+ avail -= cbs_in_tb;
+
+ ret = enqueue_ldpc_dec_one_op_tb(q, ops[i],
+ enqueued_cbs, cbs_in_tb);
+ if (ret <= 0)
+ break;
+ enqueued_cbs += ret;
+ }
+
+ acc_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
+
+ /* Update stats. */
+ q_data->queue_stats.enqueued_count += i;
+ q_data->queue_stats.enqueue_err_count += num - i;
+ return i;
+}
+
+/* Enqueue decode operations for ACC200 device in CB mode. */
+static uint16_t
+acc200_enqueue_ldpc_dec_cb(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ int32_t avail = acc_ring_avail_enq(q);
+ uint16_t i;
+ union acc_dma_desc *desc;
+ int ret;
+ bool same_op = false;
+
+ for (i = 0; i < num; ++i) {
+ /* Check if there are available space for further processing. */
+ if (unlikely(avail < 1)) {
+ acc_enqueue_ring_full(q_data);
+ break;
+ }
+ avail -= 1;
+
+ rte_bbdev_log(INFO, "Op %d %d %d %d %d %d %d %d %d %d %d %d\n",
+ i, ops[i]->ldpc_dec.op_flags, ops[i]->ldpc_dec.rv_index,
+ ops[i]->ldpc_dec.iter_max, ops[i]->ldpc_dec.iter_count,
+ ops[i]->ldpc_dec.basegraph, ops[i]->ldpc_dec.z_c,
+ ops[i]->ldpc_dec.n_cb, ops[i]->ldpc_dec.q_m,
+ ops[i]->ldpc_dec.n_filler, ops[i]->ldpc_dec.cb_params.e,
+ same_op);
+ ret = enqueue_ldpc_dec_one_op_cb(q, ops[i], i, same_op);
+ if (ret < 0) {
+ acc_enqueue_invalid(q_data);
+ break;
+ }
+ }
+
+ if (unlikely(i == 0))
+ return 0; /* Nothing to enqueue. */
+
+ /* Set SDone in last CB in enqueued ops for CB mode. */
+ desc = q->ring_addr + ((q->sw_ring_head + i - 1) & q->sw_ring_wrap_mask);
+ desc->req.sdone_enable = 1;
+ desc->req.irq_enable = q->irq_enable;
+
+ acc_dma_enqueue(q, i, &q_data->queue_stats);
+
+ /* Update stats. */
+ q_data->queue_stats.enqueued_count += i;
+ q_data->queue_stats.enqueue_err_count += num - i;
+ return i;
+}
+
+/* Enqueue decode operations for ACC200 device. */
+static uint16_t
+acc200_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+ int32_t aq_avail = acc_aq_avail(q_data, num);
+ if (unlikely((aq_avail <= 0) || (num == 0)))
+ return 0;
+ if (ops[0]->ldpc_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+ return acc200_enqueue_ldpc_dec_tb(q_data, ops, num);
+ else
+ return acc200_enqueue_ldpc_dec_cb(q_data, ops, num);
+}
+
+
+/* Dequeue one encode operations from ACC200 device in CB mode. */
+static inline int
+dequeue_enc_one_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op **ref_op,
+ uint16_t *dequeued_ops, uint32_t *aq_dequeued, uint16_t *dequeued_descs)
+{
+ union acc_dma_desc *desc, atom_desc;
+ union acc_dma_rsp_desc rsp;
+ struct rte_bbdev_enc_op *op;
+ int i;
+ struct acc_ptrs *context_ptrs;
+ int desc_idx = ((q->sw_ring_tail + *dequeued_descs) & q->sw_ring_wrap_mask);
+
+ desc = q->ring_addr + desc_idx;
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+
+ /* Check fdone bit. */
+ if (!(atom_desc.rsp.val & ACC_FDONE))
+ return -1;
+
+ rsp.val = atom_desc.rsp.val;
+ rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val);
+
+ /* Dequeue. */
+ op = desc->req.op_addr;
+
+ /* Clearing status, it will be set based on response. */
+ op->status = 0;
+
+ op->status |= ((rsp.input_err) ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
+ op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+ op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+
+ if (desc->req.last_desc_in_batch) {
+ (*aq_dequeued)++;
+ desc->req.last_desc_in_batch = 0;
+ }
+ desc->rsp.val = ACC_DMA_DESC_TYPE;
+ desc->rsp.add_info_0 = 0; /* Reserved bits. */
+ desc->rsp.add_info_1 = 0; /* Reserved bits. */
+
+ ref_op[0] = op;
+ context_ptrs = q->companion_ring_addr + desc_idx;
+ for (i = 1 ; i < desc->req.numCBs; i++)
+ ref_op[i] = context_ptrs->ptr[i].op_addr;
+
+ /* One op was successfully dequeued. */
+ (*dequeued_descs)++;
+ *dequeued_ops += desc->req.numCBs;
+ return desc->req.numCBs;
+}
+
+/* Dequeue one LDPC encode operations from ACC200 device in TB mode.
+ * That operation may cover multiple descriptors.
+ */
+static inline int
+dequeue_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op **ref_op,
+ uint16_t *dequeued_ops, uint32_t *aq_dequeued,
+ uint16_t *dequeued_descs)
+{
+ union acc_dma_desc *desc, *last_desc, atom_desc;
+ union acc_dma_rsp_desc rsp;
+ struct rte_bbdev_enc_op *op;
+ uint8_t i = 0;
+ uint16_t current_dequeued_descs = 0, descs_in_tb;
+
+ desc = q->ring_addr + ((q->sw_ring_tail + *dequeued_descs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+
+ /* Check fdone bit. */
+ if (!(atom_desc.rsp.val & ACC_FDONE))
+ return -1;
+
+ /* Get number of CBs in dequeued TB. */
+ descs_in_tb = desc->req.cbs_in_tb;
+ /* Get last CB */
+ last_desc = q->ring_addr + ((q->sw_ring_tail + *dequeued_descs + descs_in_tb - 1)
+ & q->sw_ring_wrap_mask);
+ /* Check if last CB in TB is ready to dequeue (and thus
+ * the whole TB) - checking sdone bit. If not return.
+ */
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc, __ATOMIC_RELAXED);
+ if (!(atom_desc.rsp.val & ACC_SDONE))
+ return -1;
+
+ /* Dequeue. */
+ op = desc->req.op_addr;
+
+ /* Clearing status, it will be set based on response. */
+ op->status = 0;
+
+ while (i < descs_in_tb) {
+ desc = q->ring_addr + ((q->sw_ring_tail + *dequeued_descs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+ rsp.val = atom_desc.rsp.val;
+ rte_bbdev_log_debug("Resp. desc %p: %x", desc, rsp.val);
+
+ op->status |= ((rsp.input_err) ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
+ op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+ op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+
+ if (desc->req.last_desc_in_batch) {
+ (*aq_dequeued)++;
+ desc->req.last_desc_in_batch = 0;
+ }
+ desc->rsp.val = ACC_DMA_DESC_TYPE;
+ desc->rsp.add_info_0 = 0;
+ desc->rsp.add_info_1 = 0;
+ (*dequeued_descs)++;
+ current_dequeued_descs++;
+ i++;
+ }
+
+ *ref_op = op;
+ (*dequeued_ops)++;
+ return current_dequeued_descs;
+}
+
+/* Dequeue one decode operation from ACC200 device in CB mode. */
+static inline int
+dequeue_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
+ struct acc_queue *q, struct rte_bbdev_dec_op **ref_op,
+ uint16_t dequeued_cbs, uint32_t *aq_dequeued)
+{
+ union acc_dma_desc *desc, atom_desc;
+ union acc_dma_rsp_desc rsp;
+ struct rte_bbdev_dec_op *op;
+
+ desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+
+ /* Check fdone bit. */
+ if (!(atom_desc.rsp.val & ACC_FDONE))
+ return -1;
+
+ rsp.val = atom_desc.rsp.val;
+ rte_bbdev_log_debug("Resp. desc %p: %x\n", desc, rsp.val);
+
+ /* Dequeue. */
+ op = desc->req.op_addr;
+
+ /* Clearing status, it will be set based on response. */
+ op->status = 0;
+ op->status |= ((rsp.input_err) ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
+ op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+ op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+ if (op->status != 0) {
+ /* These errors are not expected. */
+ q_data->queue_stats.dequeue_err_count++;
+ }
+
+ /* CRC invalid if error exists. */
+ if (!op->status)
+ op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
+ op->turbo_dec.iter_count = (uint8_t) rsp.iter_cnt;
+ /* Check if this is the last desc in batch (Atomic Queue). */
+ if (desc->req.last_desc_in_batch) {
+ (*aq_dequeued)++;
+ desc->req.last_desc_in_batch = 0;
+ }
+ desc->rsp.val = ACC_DMA_DESC_TYPE;
+ desc->rsp.add_info_0 = 0;
+ desc->rsp.add_info_1 = 0;
+ *ref_op = op;
+
+ /* One CB (op) was successfully dequeued. */
+ return 1;
+}
+
+/* Dequeue one decode operations from ACC200 device in CB mode. */
+static inline int
+dequeue_ldpc_dec_one_op_cb(struct rte_bbdev_queue_data *q_data,
+ struct acc_queue *q, struct rte_bbdev_dec_op **ref_op,
+ uint16_t dequeued_cbs, uint32_t *aq_dequeued)
+{
+ union acc_dma_desc *desc, atom_desc;
+ union acc_dma_rsp_desc rsp;
+ struct rte_bbdev_dec_op *op;
+
+ desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+
+ /* Check fdone bit. */
+ if (!(atom_desc.rsp.val & ACC_FDONE))
+ return -1;
+
+ rsp.val = atom_desc.rsp.val;
+ rte_bbdev_log_debug("Resp. desc %p: %x %x %x\n", desc, rsp.val, desc->rsp.add_info_0,
+ desc->rsp.add_info_1);
+
+ /* Dequeue. */
+ op = desc->req.op_addr;
+
+ /* Clearing status, it will be set based on response. */
+ op->status = 0;
+ op->status |= rsp.input_err << RTE_BBDEV_DATA_ERROR;
+ op->status |= rsp.dma_err << RTE_BBDEV_DRV_ERROR;
+ op->status |= rsp.fcw_err << RTE_BBDEV_DRV_ERROR;
+ if (op->status != 0)
+ q_data->queue_stats.dequeue_err_count++;
+
+ op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
+ if (op->ldpc_dec.hard_output.length > 0 && !rsp.synd_ok)
+ op->status |= 1 << RTE_BBDEV_SYNDROME_ERROR;
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK) ||
+ check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK)) {
+ if (desc->rsp.add_info_1 != 0)
+ op->status |= 1 << RTE_BBDEV_CRC_ERROR;
+ }
+
+ op->ldpc_dec.iter_count = (uint8_t) rsp.iter_cnt;
+
+ /* Check if this is the last desc in batch (Atomic Queue). */
+ if (desc->req.last_desc_in_batch) {
+ (*aq_dequeued)++;
+ desc->req.last_desc_in_batch = 0;
+ }
+
+ desc->rsp.val = ACC_DMA_DESC_TYPE;
+ desc->rsp.add_info_0 = 0;
+ desc->rsp.add_info_1 = 0;
+
+ *ref_op = op;
+
+ /* One CB (op) was successfully dequeued. */
+ return 1;
+}
+
+/* Dequeue one decode operations from ACC200 device in TB mode. */
+static inline int
+dequeue_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op **ref_op,
+ uint16_t dequeued_cbs, uint32_t *aq_dequeued)
+{
+ union acc_dma_desc *desc, *last_desc, atom_desc;
+ union acc_dma_rsp_desc rsp;
+ struct rte_bbdev_dec_op *op;
+ uint8_t cbs_in_tb = 1, cb_idx = 0;
+ uint32_t tb_crc_check = 0;
+
+ desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+
+ /* Check fdone bit. */
+ if (!(atom_desc.rsp.val & ACC_FDONE))
+ return -1;
+
+ /* Dequeue. */
+ op = desc->req.op_addr;
+
+ /* Get number of CBs in dequeued TB. */
+ cbs_in_tb = desc->req.cbs_in_tb;
+ /* Get last CB. */
+ last_desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs + cbs_in_tb - 1)
+ & q->sw_ring_wrap_mask);
+ /* Check if last CB in TB is ready to dequeue (and thus the whole TB) - checking sdone bit.
+ * If not return.
+ */
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)last_desc, __ATOMIC_RELAXED);
+ if (!(atom_desc.rsp.val & ACC_SDONE))
+ return -1;
+
+ /* Clearing status, it will be set based on response. */
+ op->status = 0;
+
+ /* Read remaining CBs if exists. */
+ while (cb_idx < cbs_in_tb) {
+ desc = q->ring_addr + ((q->sw_ring_tail + dequeued_cbs) & q->sw_ring_wrap_mask);
+ atom_desc.atom_hdr = __atomic_load_n((uint64_t *)desc, __ATOMIC_RELAXED);
+ rsp.val = atom_desc.rsp.val;
+ rte_bbdev_log_debug("Resp. desc %p: %x %x %x", desc,
+ rsp.val, desc->rsp.add_info_0,
+ desc->rsp.add_info_1);
+
+ op->status |= ((rsp.input_err) ? (1 << RTE_BBDEV_DATA_ERROR) : 0);
+ op->status |= ((rsp.dma_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+ op->status |= ((rsp.fcw_err) ? (1 << RTE_BBDEV_DRV_ERROR) : 0);
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK))
+ tb_crc_check ^= desc->rsp.add_info_1;
+
+ /* CRC invalid if error exists. */
+ if (!op->status)
+ op->status |= rsp.crc_status << RTE_BBDEV_CRC_ERROR;
+ op->turbo_dec.iter_count = RTE_MAX((uint8_t) rsp.iter_cnt,
+ op->turbo_dec.iter_count);
+
+ /* Check if this is the last desc in batch (Atomic Queue). */
+ if (desc->req.last_desc_in_batch) {
+ (*aq_dequeued)++;
+ desc->req.last_desc_in_batch = 0;
+ }
+ desc->rsp.val = ACC_DMA_DESC_TYPE;
+ desc->rsp.add_info_0 = 0;
+ desc->rsp.add_info_1 = 0;
+ dequeued_cbs++;
+ cb_idx++;
+ }
+
+ if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK)) {
+ rte_bbdev_log_debug("TB-CRC Check %x\n", tb_crc_check);
+ if (tb_crc_check > 0)
+ op->status |= 1 << RTE_BBDEV_CRC_ERROR;
+ }
+
+ *ref_op = op;
+
+ return cb_idx;
+}
+
+/* Dequeue LDPC encode operations from ACC200 device. */
+static uint16_t
+acc200_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ uint32_t avail = acc_ring_avail_deq(q);
+ uint32_t aq_dequeued = 0;
+ uint16_t i, dequeued_ops = 0, dequeued_descs = 0;
+ int ret, cbm;
+ struct rte_bbdev_enc_op *op;
+ if (avail == 0)
+ return 0;
+ op = (q->ring_addr + (q->sw_ring_tail & q->sw_ring_wrap_mask))->req.op_addr;
+ cbm = op->ldpc_enc.code_block_mode;
+
+ for (i = 0; i < avail; i++) {
+ if (cbm == RTE_BBDEV_TRANSPORT_BLOCK)
+ ret = dequeue_enc_one_op_tb(q, &ops[dequeued_ops],
+ &dequeued_ops, &aq_dequeued,
+ &dequeued_descs);
+ else
+ ret = dequeue_enc_one_op_cb(q, &ops[dequeued_ops],
+ &dequeued_ops, &aq_dequeued,
+ &dequeued_descs);
+ if (ret < 0)
+ break;
+ if (dequeued_ops >= num)
+ break;
+ }
+
+ q->aq_dequeued += aq_dequeued;
+ q->sw_ring_tail += dequeued_descs;
+
+ /* Update enqueue stats. */
+ q_data->queue_stats.dequeued_count += dequeued_ops;
+
+ return dequeued_ops;
+}
+
+/* Dequeue decode operations from ACC200 device. */
+static uint16_t
+acc200_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
+ struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+ struct acc_queue *q = q_data->queue_private;
+ uint16_t dequeue_num;
+ uint32_t avail = acc_ring_avail_deq(q);
+ uint32_t aq_dequeued = 0;
+ uint16_t i;
+ uint16_t dequeued_cbs = 0;
+ struct rte_bbdev_dec_op *op;
+ int ret;
+
+ dequeue_num = RTE_MIN(avail, num);
+
+ for (i = 0; i < dequeue_num; ++i) {
+ op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
+ & q->sw_ring_wrap_mask))->req.op_addr;
+ if (op->ldpc_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+ ret = dequeue_dec_one_op_tb(q, &ops[i], dequeued_cbs,
+ &aq_dequeued);
+ else
+ ret = dequeue_ldpc_dec_one_op_cb(
+ q_data, q, &ops[i], dequeued_cbs,
+ &aq_dequeued);
+
+ if (ret <= 0)
+ break;
+ dequeued_cbs += ret;
+ }
+
+ q->aq_dequeued += aq_dequeued;
+ q->sw_ring_tail += dequeued_cbs;
+
+ /* Update enqueue stats. */
+ q_data->queue_stats.dequeued_count += i;
+
+ return i;
+}
+
+/* Initialization Function */
static void
acc200_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
{
struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
dev->dev_ops = &acc200_bbdev_ops;
+ dev->enqueue_ldpc_enc_ops = acc200_enqueue_ldpc_enc;
+ dev->enqueue_ldpc_dec_ops = acc200_enqueue_ldpc_dec;
+ dev->dequeue_ldpc_enc_ops = acc200_dequeue_ldpc_enc;
+ dev->dequeue_ldpc_dec_ops = acc200_dequeue_ldpc_dec;
((struct acc_device *) dev->data->dev_private)->pf_device =
!strcmp(drv->driver.name,
--
2.37.1
next prev parent reply other threads:[~2022-10-11 21:45 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 21:43 [PATCH v11 00/16] bbdev ACC200 PMD Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 01/16] baseband/acc100: remove unused registers Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 02/16] baseband/acc100: refactor to segregate common code Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 03/16] baseband/acc: rename directory from acc100 to acc Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 04/16] baseband/acc: introduce PMD for ACC200 Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 05/16] baseband/acc: add HW register definitions " Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 06/16] baseband/acc: add info get function " Nicolas Chautru
2022-10-12 12:31 ` [EXT] " Akhil Goyal
2022-10-12 17:29 ` Chautru, Nicolas
2022-10-11 21:43 ` [PATCH v11 07/16] baseband/acc: add queue configuration " Nicolas Chautru
2022-10-11 21:43 ` Nicolas Chautru [this message]
2022-10-11 21:43 ` [PATCH v11 09/16] baseband/acc: add LTE processing functions Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 10/16] baseband/acc: add support for FFT operations Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 11/16] baseband/acc: support interrupt Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 12/16] baseband/acc: add device status and vf2pf comms Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 13/16] baseband/acc: add PF configure companion function Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 14/16] baseband/acc: simplify meson dependency Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 15/16] baseband/acc: add helper function for descriptor index Nicolas Chautru
2022-10-11 21:43 ` [PATCH v11 16/16] test-bbdev: unit test capability extension Nicolas Chautru
2022-10-12 12:33 ` [EXT] " Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011214338.15034-9-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=bruce.richardson@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=hernan.vargas@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=mdr@ashroe.eu \
--cc=stephen@networkplumber.org \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).