* [PATCH v4 1/6] crypto/uadk: introduce uadk crypto driver
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 2/6] crypto/uadk: support basic operations Zhangfei Gao
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
Introduce a new crypto PMD for hardware accelerators based on UADK [1].
UADK is a framework for user applications to access hardware accelerators.
UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
the same page table between IOMMU and MMU.
Thereby user application can directly use virtual address for device dma,
which enhances the performance as well as easy usability.
This patch adds the basic framework.
[1] https://github.com/Linaro/uadk
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
MAINTAINERS | 6 ++
doc/guides/cryptodevs/features/uadk.ini | 33 +++++++
doc/guides/cryptodevs/index.rst | 1 +
doc/guides/cryptodevs/uadk.rst | 67 +++++++++++++
drivers/crypto/meson.build | 1 +
drivers/crypto/uadk/meson.build | 30 ++++++
drivers/crypto/uadk/uadk_crypto_pmd.c | 122 ++++++++++++++++++++++++
drivers/crypto/uadk/version.map | 3 +
8 files changed, 263 insertions(+)
create mode 100644 doc/guides/cryptodevs/features/uadk.ini
create mode 100644 doc/guides/cryptodevs/uadk.rst
create mode 100644 drivers/crypto/uadk/meson.build
create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
create mode 100644 drivers/crypto/uadk/version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f56111323..bf9baa9070 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1060,6 +1060,12 @@ M: Kai Ji <kai.ji@intel.com>
F: drivers/crypto/scheduler/
F: doc/guides/cryptodevs/scheduler.rst
+HiSilicon UADK crypto
+M: Zhangfei Gao <zhangfei.gao@linaro.org>
+F: drivers/crypto/uadk/
+F: doc/guides/cryptodevs/uadk.rst
+F: doc/guides/cryptodevs/features/uadk.ini
+
Intel QuickAssist
M: Kai Ji <kai.ji@intel.com>
F: drivers/crypto/qat/
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
new file mode 100644
index 0000000000..df5ad40e3d
--- /dev/null
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -0,0 +1,33 @@
+;
+; Supported features of the 'uadk' crypto driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+HW Accelerated = Y
+
+;
+; Supported crypto algorithms of the 'uadk' crypto driver.
+;
+[Cipher]
+
+;
+; Supported authentication algorithms of the 'uadk' crypto driver.
+;
+[Auth]
+
+;
+; Supported AEAD algorithms of the 'uadk' crypto driver.
+;
+[AEAD]
+
+;
+; Supported Asymmetric algorithms of the 'uadk' crypto driver.
+;
+[Asymmetric]
+
+;
+; Supported Operating systems of the 'uadk' crypto driver.
+;
+[OS]
+Linux = Y
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 39cca6dbde..cb4ce227e9 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -30,5 +30,6 @@ Crypto Device Drivers
scheduler
snow3g
qat
+ uadk
virtio
zuc
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
new file mode 100644
index 0000000000..1d4f57a226
--- /dev/null
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+ Copyright 2022-2023 Linaro ltd.
+
+UADK Crypto Poll Mode Driver
+=======================================================
+
+UADK crypto PMD provides poll mode driver
+All cryptographic operations are using UADK crypto API.
+Hardware accelerators using UADK are supposed to be supported.
+
+
+Features
+--------
+
+UADK crypto PMD has support for:
+
+
+Test steps
+-----------
+
+ .. code-block:: console
+
+ 1. Build
+ cd dpdk
+ mkdir build
+ meson build (--reconfigure)
+ cd build
+ ninja
+ sudo ninja install
+
+ 2. Prepare
+ echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+ echo 1024 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
+ echo 1024 > /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages
+ echo 1024 > /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages
+ mkdir -p /mnt/huge_2mb
+ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
+
+ 3. Run test app
+
+Dependency
+------------
+
+UADK crypto PMD relies on UADK library [1]
+
+UADK is a framework for user applications to access hardware accelerators.
+UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
+the same page table between IOMMU and MMU.
+As a result, user application can directly use virtual address for device dma,
+which enhances the performance as well as easy usability.
+
+Build & Install UADK
+-----------
+
+ .. code-block:: console
+
+ git clone https://github.com/Linaro/uadk.git
+ cd uadk
+ ./autogen.sh
+ ./configure
+ make
+ sudo make install
+
+* If get error:"cannot find -lnuma", please install the libnuma-dev
+
+[1] https://github.com/Linaro/uadk
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 147b8cf633..ee5377deff 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -18,6 +18,7 @@ drivers = [
'octeontx',
'openssl',
'scheduler',
+ 'uadk',
'virtio',
]
diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build
new file mode 100644
index 0000000000..f6fae0a239
--- /dev/null
+++ b/drivers/crypto/uadk/meson.build
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+# Copyright 2022-2023 Linaro ltd.
+
+if not is_linux
+ build = false
+ reason = 'only supported on Linux'
+ subdir_done()
+endif
+
+sources = files(
+ 'uadk_crypto_pmd.c',
+)
+
+deps += 'bus_vdev'
+dep = dependency('libwd_crypto', required: false, method: 'pkg-config')
+if not dep.found()
+ build = false
+ reason = 'missing dependency, "libwd_crypto"'
+else
+ ext_deps += dep
+endif
+
+dep = dependency('libwd', required: false, method: 'pkg-config')
+if not dep.found()
+ build = false
+ reason = 'missing dependency, "libwd"'
+else
+ ext_deps += dep
+endif
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
new file mode 100644
index 0000000000..ec9bb174c7
--- /dev/null
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+ * Copyright 2022-2023 Linaro ltd.
+ */
+
+#include <bus_vdev_driver.h>
+#include <cryptodev_pmd.h>
+#include <rte_bus_vdev.h>
+#include <rte_comp.h>
+#include <stdlib.h>
+#include <uadk/wd_cipher.h>
+#include <uadk/wd_digest.h>
+#include <uadk/wd_sched.h>
+
+enum uadk_crypto_version {
+ UADK_CRYPTO_V2,
+ UADK_CRYPTO_V3,
+};
+
+struct uadk_crypto_priv {
+ enum uadk_crypto_version version;
+} __rte_cache_aligned;
+
+static uint8_t uadk_cryptodev_driver_id;
+
+RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
+
+#define UADK_LOG(level, fmt, ...) \
+ rte_log(RTE_LOG_ ## level, uadk_crypto_logtype, \
+ "%s() line %u: " fmt "\n", __func__, __LINE__, \
+ ## __VA_ARGS__)
+
+static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
+ .dev_configure = NULL,
+ .dev_start = NULL,
+ .dev_stop = NULL,
+ .dev_close = NULL,
+ .stats_get = NULL,
+ .stats_reset = NULL,
+ .dev_infos_get = NULL,
+ .queue_pair_setup = NULL,
+ .queue_pair_release = NULL,
+ .sym_session_get_size = NULL,
+ .sym_session_configure = NULL,
+ .sym_session_clear = NULL,
+};
+
+static int
+uadk_cryptodev_probe(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev_pmd_init_params init_params = {
+ .name = "",
+ .private_data_size = sizeof(struct uadk_crypto_priv),
+ .max_nb_queue_pairs =
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
+ };
+ enum uadk_crypto_version version = UADK_CRYPTO_V2;
+ struct uadk_crypto_priv *priv;
+ struct rte_cryptodev *dev;
+ struct uacce_dev *udev;
+ const char *name;
+
+ udev = wd_get_accel_dev("cipher");
+ if (!udev)
+ return -ENODEV;
+
+ if (!strcmp(udev->api, "hisi_qm_v2"))
+ version = UADK_CRYPTO_V2;
+
+ free(udev);
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+
+ dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params);
+ if (dev == NULL) {
+ UADK_LOG(ERR, "driver %s: create failed", init_params.name);
+ return -ENODEV;
+ }
+
+ dev->dev_ops = &uadk_crypto_pmd_ops;
+ dev->driver_id = uadk_cryptodev_driver_id;
+ dev->dequeue_burst = NULL;
+ dev->enqueue_burst = NULL;
+ dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
+ priv = dev->data->dev_private;
+ priv->version = version;
+
+ rte_cryptodev_pmd_probing_finish(dev);
+
+ return 0;
+}
+
+static int
+uadk_cryptodev_remove(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev *cryptodev;
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+
+ cryptodev = rte_cryptodev_pmd_get_named_dev(name);
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ return rte_cryptodev_pmd_destroy(cryptodev);
+}
+
+static struct rte_vdev_driver uadk_crypto_pmd = {
+ .probe = uadk_cryptodev_probe,
+ .remove = uadk_cryptodev_remove,
+};
+
+static struct cryptodev_driver uadk_crypto_drv;
+
+#define UADK_CRYPTO_DRIVER_NAME crypto_uadk
+RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME, uadk_crypto_pmd);
+RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv, uadk_crypto_pmd.driver,
+ uadk_cryptodev_driver_id);
diff --git a/drivers/crypto/uadk/version.map b/drivers/crypto/uadk/version.map
new file mode 100644
index 0000000000..c2e0723b4c
--- /dev/null
+++ b/drivers/crypto/uadk/version.map
@@ -0,0 +1,3 @@
+DPDK_22 {
+ local: *;
+};
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v4 2/6] crypto/uadk: support basic operations
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 1/6] " Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 3/6] crypto/uadk: support enqueue/dequeue operations Zhangfei Gao
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
Support the basic dev control operations: configure, close, start,
stop and get info, as well as queue pairs operations.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/crypto/uadk/uadk_crypto_pmd.c | 213 ++++++++++++++++++++++++--
1 file changed, 204 insertions(+), 9 deletions(-)
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index ec9bb174c7..1d1a4b2897 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -12,6 +12,25 @@
#include <uadk/wd_digest.h>
#include <uadk/wd_sched.h>
+/* Maximum length for digest (SHA-512 needs 64 bytes) */
+#define DIGEST_LENGTH_MAX 64
+
+struct uadk_qp {
+ /* Ring for placing process packets */
+ struct rte_ring *processed_pkts;
+ /* Queue pair statistics */
+ struct rte_cryptodev_stats qp_stats;
+ /* Queue Pair Identifier */
+ uint16_t id;
+ /* Unique Queue Pair Name */
+ char name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ /* Buffer used to store the digest generated
+ * by the driver when verifying a digest provided
+ * by the user (using authentication verify operation)
+ */
+ uint8_t temp_digest[DIGEST_LENGTH_MAX];
+} __rte_cache_aligned;
+
enum uadk_crypto_version {
UADK_CRYPTO_V2,
UADK_CRYPTO_V3,
@@ -30,16 +49,192 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
"%s() line %u: " fmt "\n", __func__, __LINE__, \
## __VA_ARGS__)
+static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ /* End of capabilities */
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+/* Configure device */
+static int
+uadk_crypto_pmd_config(struct rte_cryptodev *dev __rte_unused,
+ struct rte_cryptodev_config *config __rte_unused)
+{
+ return 0;
+}
+
+/* Start device */
+static int
+uadk_crypto_pmd_start(struct rte_cryptodev *dev __rte_unused)
+{
+ return 0;
+}
+
+/* Stop device */
+static void
+uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused)
+{
+}
+
+/* Close device */
+static int
+uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused)
+{
+ return 0;
+}
+
+/* Get device statistics */
+static void
+uadk_crypto_pmd_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ stats->enqueued_count += qp->qp_stats.enqueued_count;
+ stats->dequeued_count += qp->qp_stats.dequeued_count;
+ stats->enqueue_err_count += qp->qp_stats.enqueue_err_count;
+ stats->dequeue_err_count += qp->qp_stats.dequeue_err_count;
+ }
+}
+
+/* Reset device statistics */
+static void
+uadk_crypto_pmd_stats_reset(struct rte_cryptodev *dev __rte_unused)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+ }
+}
+
+/* Get device info */
+static void
+uadk_crypto_pmd_info_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+
+ if (dev_info != NULL) {
+ dev_info->driver_id = dev->driver_id;
+ dev_info->driver_name = dev->device->driver->name;
+ dev_info->max_nb_queue_pairs = 128;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
+ dev_info->feature_flags = dev->feature_flags;
+
+ if (priv->version == UADK_CRYPTO_V2)
+ dev_info->capabilities = uadk_crypto_v2_capabilities;
+ }
+}
+
+/* Release queue pair */
+static int
+uadk_crypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ if (qp) {
+ rte_ring_free(qp->processed_pkts);
+ rte_free(qp);
+ dev->data->queue_pairs[qp_id] = NULL;
+ }
+
+ return 0;
+}
+
+/* set a unique name for the queue pair based on its name, dev_id and qp_id */
+static int
+uadk_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+ struct uadk_qp *qp)
+{
+ unsigned int n = snprintf(qp->name, sizeof(qp->name),
+ "uadk_crypto_pmd_%u_qp_%u",
+ dev->data->dev_id, qp->id);
+
+ if (n >= sizeof(qp->name))
+ return -EINVAL;
+
+ return 0;
+}
+
+/* Create a ring to place process packets on */
+static struct rte_ring *
+uadk_pmd_qp_create_processed_pkts_ring(struct uadk_qp *qp,
+ unsigned int ring_size, int socket_id)
+{
+ struct rte_ring *r = qp->processed_pkts;
+
+ if (r) {
+ if (rte_ring_get_size(r) >= ring_size) {
+ UADK_LOG(INFO, "Reusing existing ring %s for processed packets",
+ qp->name);
+ return r;
+ }
+
+ UADK_LOG(ERR, "Unable to reuse existing ring %s for processed packets",
+ qp->name);
+ return NULL;
+ }
+
+ return rte_ring_create(qp->name, ring_size, socket_id,
+ RING_F_EXACT_SZ);
+}
+
+static int
+uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id)
+{
+ struct uadk_qp *qp;
+
+ /* Free memory prior to re-allocation if needed. */
+ if (dev->data->queue_pairs[qp_id] != NULL)
+ uadk_crypto_pmd_qp_release(dev, qp_id);
+
+ /* Allocate the queue pair data structure. */
+ qp = rte_zmalloc_socket("uadk PMD Queue Pair", sizeof(*qp),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (qp == NULL)
+ return (-ENOMEM);
+
+ qp->id = qp_id;
+ dev->data->queue_pairs[qp_id] = qp;
+
+ if (uadk_pmd_qp_set_unique_name(dev, qp))
+ goto qp_setup_cleanup;
+
+ qp->processed_pkts = uadk_pmd_qp_create_processed_pkts_ring(qp,
+ qp_conf->nb_descriptors, socket_id);
+ if (qp->processed_pkts == NULL)
+ goto qp_setup_cleanup;
+
+ memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+
+ return 0;
+
+qp_setup_cleanup:
+ if (qp) {
+ rte_free(qp);
+ qp = NULL;
+ }
+ return -EINVAL;
+}
+
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
- .dev_configure = NULL,
- .dev_start = NULL,
- .dev_stop = NULL,
- .dev_close = NULL,
- .stats_get = NULL,
- .stats_reset = NULL,
- .dev_infos_get = NULL,
- .queue_pair_setup = NULL,
- .queue_pair_release = NULL,
+ .dev_configure = uadk_crypto_pmd_config,
+ .dev_start = uadk_crypto_pmd_start,
+ .dev_stop = uadk_crypto_pmd_stop,
+ .dev_close = uadk_crypto_pmd_close,
+ .stats_get = uadk_crypto_pmd_stats_get,
+ .stats_reset = uadk_crypto_pmd_stats_reset,
+ .dev_infos_get = uadk_crypto_pmd_info_get,
+ .queue_pair_setup = uadk_crypto_pmd_qp_setup,
+ .queue_pair_release = uadk_crypto_pmd_qp_release,
.sym_session_get_size = NULL,
.sym_session_configure = NULL,
.sym_session_clear = NULL,
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v4 3/6] crypto/uadk: support enqueue/dequeue operations
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 1/6] " Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 2/6] crypto/uadk: support basic operations Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
This commit adds the enqueue and dequeue operations.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/crypto/uadk/uadk_crypto_pmd.c | 53 ++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 1d1a4b2897..051d6726b0 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -240,6 +240,55 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.sym_session_clear = NULL,
};
+static uint16_t
+uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct uadk_qp *qp = queue_pair;
+ struct rte_crypto_op *op;
+ uint16_t enqd = 0;
+ int i, ret;
+
+ for (i = 0; i < nb_ops; i++) {
+ op = ops[i];
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+ if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) {
+ ret = rte_ring_enqueue(qp->processed_pkts, (void *)op);
+ if (ret < 0)
+ goto enqueue_err;
+ qp->qp_stats.enqueued_count++;
+ enqd++;
+ } else {
+ /* increment count if failed to enqueue op */
+ qp->qp_stats.enqueue_err_count++;
+ }
+ }
+
+ return enqd;
+
+enqueue_err:
+ qp->qp_stats.enqueue_err_count++;
+ return enqd;
+}
+
+static uint16_t
+uadk_crypto_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct uadk_qp *qp = queue_pair;
+ unsigned int nb_dequeued;
+
+ nb_dequeued = rte_ring_dequeue_burst(qp->processed_pkts,
+ (void **)ops, nb_ops, NULL);
+ qp->qp_stats.dequeued_count += nb_dequeued;
+
+ return nb_dequeued;
+}
+
static int
uadk_cryptodev_probe(struct rte_vdev_device *vdev)
{
@@ -276,8 +325,8 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
dev->dev_ops = &uadk_crypto_pmd_ops;
dev->driver_id = uadk_cryptodev_driver_id;
- dev->dequeue_burst = NULL;
- dev->enqueue_burst = NULL;
+ dev->dequeue_burst = uadk_crypto_dequeue_burst;
+ dev->enqueue_burst = uadk_crypto_enqueue_burst;
dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
priv = dev->data->dev_private;
priv->version = version;
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v4 4/6] crypto/uadk: support cipher algorithms
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (2 preceding siblings ...)
2022-10-19 12:57 ` [PATCH v4 3/6] crypto/uadk: support enqueue/dequeue operations Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 5/6] crypto/uadk: support auth algorithms Zhangfei Gao
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES_ECB``
* ``RTE_CRYPTO_CIPHER_AES_CBC``
* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_DES_CBC``
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/features/uadk.ini | 10 +
doc/guides/cryptodevs/uadk.rst | 6 +
drivers/crypto/uadk/uadk_crypto_pmd.c | 330 +++++++++++++++++++++++-
3 files changed, 341 insertions(+), 5 deletions(-)
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
index df5ad40e3d..005e08ac8d 100644
--- a/doc/guides/cryptodevs/features/uadk.ini
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -4,12 +4,22 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Symmetric crypto = Y
HW Accelerated = Y
;
; Supported crypto algorithms of the 'uadk' crypto driver.
;
[Cipher]
+AES CBC (128) = Y
+AES CBC (192) = Y
+AES CBC (256) = Y
+AES ECB (128) = Y
+AES ECB (192) = Y
+AES ECB (256) = Y
+AES XTS (128) = Y
+AES XTS (256) = Y
+DES CBC = Y
;
; Supported authentication algorithms of the 'uadk' crypto driver.
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 1d4f57a226..4e26127e0e 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -15,6 +15,12 @@ Features
UADK crypto PMD has support for:
+Cipher algorithms:
+
+* ``RTE_CRYPTO_CIPHER_AES_ECB``
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_XTS``
+* ``RTE_CRYPTO_CIPHER_DES_CBC``
Test steps
-----------
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 051d6726b0..8e2e3b7877 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -31,12 +31,35 @@ struct uadk_qp {
uint8_t temp_digest[DIGEST_LENGTH_MAX];
} __rte_cache_aligned;
+enum uadk_chain_order {
+ UADK_CHAIN_ONLY_CIPHER,
+ UADK_CHAIN_NOT_SUPPORTED
+};
+
+struct uadk_crypto_session {
+ handle_t handle_cipher;
+ enum uadk_chain_order chain_order;
+
+ /* IV parameters */
+ struct {
+ uint16_t length;
+ uint16_t offset;
+ } iv;
+
+ /* Cipher Parameters */
+ struct {
+ enum rte_crypto_cipher_operation direction;
+ struct wd_cipher_req req;
+ } cipher;
+} __rte_cache_aligned;
+
enum uadk_crypto_version {
UADK_CRYPTO_V2,
UADK_CRYPTO_V3,
};
struct uadk_crypto_priv {
+ bool env_cipher_init;
enum uadk_crypto_version version;
} __rte_cache_aligned;
@@ -50,6 +73,86 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
## __VA_ARGS__)
static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ { /* AES ECB */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_ECB,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES XTS */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .block_size = 1,
+ .key_size = {
+ .min = 32,
+ .max = 64,
+ .increment = 32
+ },
+ .iv_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
/* End of capabilities */
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
@@ -77,8 +180,15 @@ uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused)
/* Close device */
static int
-uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused)
+uadk_crypto_pmd_close(struct rte_cryptodev *dev)
{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+
+ if (priv->env_cipher_init) {
+ wd_cipher_env_uninit();
+ priv->env_cipher_init = false;
+ }
+
return 0;
}
@@ -225,6 +335,159 @@ uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
return -EINVAL;
}
+static unsigned int
+uadk_crypto_sym_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+ return sizeof(struct uadk_crypto_session);
+}
+
+static enum uadk_chain_order
+uadk_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+ enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;
+
+ if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ if (xform->next == NULL)
+ res = UADK_CHAIN_ONLY_CIPHER;
+ }
+ }
+
+ return res;
+}
+
+static int
+uadk_set_session_cipher_parameters(struct rte_cryptodev *dev,
+ struct uadk_crypto_session *sess,
+ struct rte_crypto_sym_xform *xform)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+ struct rte_crypto_cipher_xform *cipher = &xform->cipher;
+ struct wd_cipher_sess_setup setup = {0};
+ struct sched_params params = {0};
+ int ret;
+
+ if (!priv->env_cipher_init) {
+ ret = wd_cipher_env_init(NULL);
+ if (ret < 0)
+ return -EINVAL;
+ priv->env_cipher_init = true;
+ }
+
+ sess->cipher.direction = cipher->op;
+ sess->iv.offset = cipher->iv.offset;
+ sess->iv.length = cipher->iv.length;
+
+ switch (cipher->algo) {
+ /* Cover supported cipher algorithms */
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_CTR;
+ sess->cipher.req.out_bytes = 64;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_ECB:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_ECB;
+ sess->cipher.req.out_bytes = 16;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_CBC;
+ if (cipher->key.length == 16)
+ sess->cipher.req.out_bytes = 16;
+ else
+ sess->cipher.req.out_bytes = 64;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_XTS:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_XTS;
+ if (cipher->key.length == 16)
+ sess->cipher.req.out_bytes = 32;
+ else
+ sess->cipher.req.out_bytes = 512;
+ break;
+ default:
+ ret = -ENOTSUP;
+ goto env_uninit;
+ }
+
+ params.numa_id = -1; /* choose nearby numa node */
+ setup.sched_param = ¶ms;
+ sess->handle_cipher = wd_cipher_alloc_sess(&setup);
+ if (!sess->handle_cipher) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ ret = wd_cipher_set_key(sess->handle_cipher, cipher->key.data, cipher->key.length);
+ if (ret) {
+ wd_cipher_free_sess(sess->handle_cipher);
+ UADK_LOG(ERR, "uadk failed to set key!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ return 0;
+
+env_uninit:
+ wd_cipher_env_uninit();
+ priv->env_cipher_init = false;
+ return ret;
+}
+
+static int
+uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ struct rte_cryptodev_sym_session *session)
+{
+ struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
+ int ret;
+
+ if (unlikely(!sess)) {
+ UADK_LOG(ERR, "Session not available");
+ return -EINVAL;
+ }
+
+ sess->chain_order = uadk_get_chain_order(xform);
+ switch (sess->chain_order) {
+ case UADK_CHAIN_ONLY_CIPHER:
+ cipher_xform = xform;
+ break;
+ default:
+ return -ENOTSUP;
+ }
+
+ if (cipher_xform) {
+ ret = uadk_set_session_cipher_parameters(dev, sess, cipher_xform);
+ if (ret != 0) {
+ UADK_LOG(ERR,
+ "Invalid/unsupported cipher parameters");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void
+uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused,
+ struct rte_cryptodev_sym_session *session)
+{
+ struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
+
+ if (unlikely(sess == NULL)) {
+ UADK_LOG(ERR, "Session not available");
+ return;
+ }
+
+ if (sess->handle_cipher) {
+ wd_cipher_free_sess(sess->handle_cipher);
+ sess->handle_cipher = 0;
+ }
+}
+
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.dev_configure = uadk_crypto_pmd_config,
.dev_start = uadk_crypto_pmd_start,
@@ -235,16 +498,54 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.dev_infos_get = uadk_crypto_pmd_info_get,
.queue_pair_setup = uadk_crypto_pmd_qp_setup,
.queue_pair_release = uadk_crypto_pmd_qp_release,
- .sym_session_get_size = NULL,
- .sym_session_configure = NULL,
- .sym_session_clear = NULL,
+ .sym_session_get_size = uadk_crypto_sym_session_get_size,
+ .sym_session_configure = uadk_crypto_sym_session_configure,
+ .sym_session_clear = uadk_crypto_sym_session_clear,
};
+static void
+uadk_process_cipher_op(struct rte_crypto_op *op,
+ struct uadk_crypto_session *sess,
+ struct rte_mbuf *msrc, struct rte_mbuf *mdst)
+{
+ uint32_t off = op->sym->cipher.data.offset;
+ int ret;
+
+ if (!sess) {
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+
+ sess->cipher.req.src = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off);
+ sess->cipher.req.in_bytes = op->sym->cipher.data.length;
+ sess->cipher.req.dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *, off);
+ sess->cipher.req.out_buf_bytes = sess->cipher.req.in_bytes;
+ sess->cipher.req.iv_bytes = sess->iv.length;
+ sess->cipher.req.iv = rte_crypto_op_ctod_offset(op, uint8_t *,
+ sess->iv.offset);
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ sess->cipher.req.op_type = WD_CIPHER_ENCRYPTION;
+ else
+ sess->cipher.req.op_type = WD_CIPHER_DECRYPTION;
+
+ do {
+ ret = wd_do_cipher_sync(sess->handle_cipher, &sess->cipher.req);
+ } while (ret == -WD_EBUSY);
+
+ if (sess->cipher.req.out_buf_bytes > sess->cipher.req.in_bytes)
+ op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+
+ if (ret)
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+}
+
static uint16_t
uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
{
struct uadk_qp *qp = queue_pair;
+ struct uadk_crypto_session *sess = NULL;
+ struct rte_mbuf *msrc, *mdst;
struct rte_crypto_op *op;
uint16_t enqd = 0;
int i, ret;
@@ -252,6 +553,23 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
for (i = 0; i < nb_ops; i++) {
op = ops[i];
op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+ msrc = op->sym->m_src;
+ mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+ if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) {
+ if (likely(op->sym->session != NULL))
+ sess = CRYPTODEV_GET_SYM_SESS_PRIV(
+ op->sym->session);
+ }
+
+ switch (sess->chain_order) {
+ case UADK_CHAIN_ONLY_CIPHER:
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
@@ -327,7 +645,9 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
dev->driver_id = uadk_cryptodev_driver_id;
dev->dequeue_burst = uadk_crypto_dequeue_burst;
dev->enqueue_burst = uadk_crypto_enqueue_burst;
- dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
+ dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED |
+ RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_SESSIONLESS;
priv = dev->data->dev_private;
priv->version = version;
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v4 5/6] crypto/uadk: support auth algorithms
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (3 preceding siblings ...)
2022-10-19 12:57 ` [PATCH v4 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
Hash algorithms:
* ``RTE_CRYPTO_AUTH_MD5``
* ``RTE_CRYPTO_AUTH_MD5_HMAC``
* ``RTE_CRYPTO_AUTH_SHA1``
* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
* ``RTE_CRYPTO_AUTH_SHA224``
* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
* ``RTE_CRYPTO_AUTH_SHA256``
* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
* ``RTE_CRYPTO_AUTH_SHA384``
* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
* ``RTE_CRYPTO_AUTH_SHA512``
* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/features/uadk.ini | 12 +
doc/guides/cryptodevs/uadk.rst | 15 +
drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++
3 files changed, 486 insertions(+)
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
index 005e08ac8d..2e8a37a2b3 100644
--- a/doc/guides/cryptodevs/features/uadk.ini
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -25,6 +25,18 @@ DES CBC = Y
; Supported authentication algorithms of the 'uadk' crypto driver.
;
[Auth]
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA224 = Y
+SHA224 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
;
; Supported AEAD algorithms of the 'uadk' crypto driver.
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 4e26127e0e..8f09e4390e 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -22,6 +22,21 @@ Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_DES_CBC``
+Hash algorithms:
+
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+
Test steps
-----------
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 8e2e3b7877..a166efa36c 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -33,11 +33,15 @@ struct uadk_qp {
enum uadk_chain_order {
UADK_CHAIN_ONLY_CIPHER,
+ UADK_CHAIN_ONLY_AUTH,
+ UADK_CHAIN_CIPHER_AUTH,
+ UADK_CHAIN_AUTH_CIPHER,
UADK_CHAIN_NOT_SUPPORTED
};
struct uadk_crypto_session {
handle_t handle_cipher;
+ handle_t handle_digest;
enum uadk_chain_order chain_order;
/* IV parameters */
@@ -51,6 +55,13 @@ struct uadk_crypto_session {
enum rte_crypto_cipher_operation direction;
struct wd_cipher_req req;
} cipher;
+
+ /* Authentication Parameters */
+ struct {
+ struct wd_digest_req req;
+ enum rte_crypto_auth_operation operation;
+ uint16_t digest_length;
+ } auth;
} __rte_cache_aligned;
enum uadk_crypto_version {
@@ -60,6 +71,7 @@ enum uadk_crypto_version {
struct uadk_crypto_priv {
bool env_cipher_init;
+ bool env_auth_init;
enum uadk_crypto_version version;
} __rte_cache_aligned;
@@ -73,6 +85,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
## __VA_ARGS__)
static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
{ /* AES ECB */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
@@ -189,6 +447,11 @@ uadk_crypto_pmd_close(struct rte_cryptodev *dev)
priv->env_cipher_init = false;
}
+ if (priv->env_auth_init) {
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ }
+
return 0;
}
@@ -347,9 +610,19 @@ uadk_get_chain_order(const struct rte_crypto_sym_xform *xform)
enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;
if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ if (xform->next == NULL)
+ res = UADK_CHAIN_ONLY_AUTH;
+ else if (xform->next->type ==
+ RTE_CRYPTO_SYM_XFORM_CIPHER)
+ res = UADK_CHAIN_AUTH_CIPHER;
+ }
+
if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
if (xform->next == NULL)
res = UADK_CHAIN_ONLY_CIPHER;
+ else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ res = UADK_CHAIN_CIPHER_AUTH;
}
}
@@ -436,12 +709,119 @@ uadk_set_session_cipher_parameters(struct rte_cryptodev *dev,
return ret;
}
+/* Set session auth parameters */
+static int
+uadk_set_session_auth_parameters(struct rte_cryptodev *dev,
+ struct uadk_crypto_session *sess,
+ struct rte_crypto_sym_xform *xform)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+ struct wd_digest_sess_setup setup = {0};
+ struct sched_params params = {0};
+ int ret;
+
+ if (!priv->env_auth_init) {
+ ret = wd_digest_env_init(NULL);
+ if (ret < 0)
+ return -EINVAL;
+ priv->env_auth_init = true;
+ }
+
+ sess->auth.operation = xform->auth.op;
+ sess->auth.digest_length = xform->auth.digest_length;
+
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_MD5) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_MD5;
+ sess->auth.req.out_buf_bytes = 16;
+ sess->auth.req.out_bytes = 16;
+ break;
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA1) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA1;
+ sess->auth.req.out_buf_bytes = 20;
+ sess->auth.req.out_bytes = 20;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA224) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA224;
+ sess->auth.req.out_buf_bytes = 28;
+ sess->auth.req.out_bytes = 28;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA256) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA256;
+ sess->auth.req.out_buf_bytes = 32;
+ sess->auth.req.out_bytes = 32;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA384) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA384;
+ sess->auth.req.out_buf_bytes = 48;
+ sess->auth.req.out_bytes = 48;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA512) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA512;
+ sess->auth.req.out_buf_bytes = 64;
+ sess->auth.req.out_bytes = 64;
+ break;
+ default:
+ ret = -ENOTSUP;
+ goto env_uninit;
+ }
+
+ params.numa_id = -1; /* choose nearby numa node */
+ setup.sched_param = ¶ms;
+ sess->handle_digest = wd_digest_alloc_sess(&setup);
+ if (!sess->handle_digest) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ /* if mode is HMAC, should set key */
+ if (setup.mode == WD_DIGEST_HMAC) {
+ ret = wd_digest_set_key(sess->handle_digest,
+ xform->auth.key.data,
+ xform->auth.key.length);
+ if (ret) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+ }
+
+ return 0;
+
+env_uninit:
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ return ret;
+}
+
static int
uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
struct rte_crypto_sym_xform *xform,
struct rte_cryptodev_sym_session *session)
{
struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct rte_crypto_sym_xform *auth_xform = NULL;
struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
int ret;
@@ -455,6 +835,17 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
case UADK_CHAIN_ONLY_CIPHER:
cipher_xform = xform;
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ auth_xform = xform;
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
default:
return -ENOTSUP;
}
@@ -468,6 +859,15 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
}
}
+ if (auth_xform) {
+ ret = uadk_set_session_auth_parameters(dev, sess, auth_xform);
+ if (ret != 0) {
+ UADK_LOG(ERR,
+ "Invalid/unsupported auth parameters");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -486,6 +886,11 @@ uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused,
wd_cipher_free_sess(sess->handle_cipher);
sess->handle_cipher = 0;
}
+
+ if (sess->handle_digest) {
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ }
}
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
@@ -539,6 +944,49 @@ uadk_process_cipher_op(struct rte_crypto_op *op,
op->status = RTE_COMP_OP_STATUS_ERROR;
}
+static void
+uadk_process_auth_op(struct uadk_qp *qp, struct rte_crypto_op *op,
+ struct uadk_crypto_session *sess,
+ struct rte_mbuf *msrc, struct rte_mbuf *mdst)
+{
+ uint32_t srclen = op->sym->auth.data.length;
+ uint32_t off = op->sym->auth.data.offset;
+ uint8_t *dst = qp->temp_digest;
+ int ret;
+
+ if (!sess) {
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+
+ sess->auth.req.in = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off);
+ sess->auth.req.in_bytes = srclen;
+ sess->auth.req.out = dst;
+
+ do {
+ ret = wd_do_digest_sync(sess->handle_digest, &sess->auth.req);
+ } while (ret == -WD_EBUSY);
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+ if (memcmp(dst, op->sym->auth.digest.data,
+ sess->auth.digest_length) != 0) {
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ }
+ } else {
+ uint8_t *auth_dst;
+
+ auth_dst = op->sym->auth.digest.data;
+ if (auth_dst == NULL)
+ auth_dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *,
+ op->sym->auth.data.offset +
+ op->sym->auth.data.length);
+ memcpy(auth_dst, dst, sess->auth.digest_length);
+ }
+
+ if (ret)
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+}
+
static uint16_t
uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
@@ -566,6 +1014,17 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
case UADK_CHAIN_ONLY_CIPHER:
uadk_process_cipher_op(op, sess, msrc, mdst);
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ uadk_process_auth_op(qp, op, sess, mdst, mdst);
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ break;
default:
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
break;
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH v4 6/6] test/crypto: add cryptodev_uadk_autotest
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (4 preceding siblings ...)
2022-10-19 12:57 ` [PATCH v4 5/6] crypto/uadk: support auth algorithms Zhangfei Gao
@ 2022-10-19 12:57 ` Zhangfei Gao
2022-10-20 14:44 ` [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
2022-10-20 14:51 ` Akhil Goyal
7 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-19 12:57 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc, Zhangfei Gao
Example:
sudo dpdk-test --vdev=crypto_uadk --log-level=6
RTE>>cryptodev_uadk_autotest
RTE>>quit
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
app/test/test_cryptodev.c | 7 +++++++
app/test/test_cryptodev.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index c2b33686ed..183e24f150 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -16467,6 +16467,12 @@ test_cryptodev_qat(void)
return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
}
+static int
+test_cryptodev_uadk(void)
+{
+ return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_UADK_PMD));
+}
+
static int
test_cryptodev_virtio(void)
{
@@ -16810,6 +16816,7 @@ REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest, test_cryptodev_mrvl);
REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec);
REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
+REGISTER_TEST_COMMAND(cryptodev_uadk_autotest, test_cryptodev_uadk);
REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio);
REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest, test_cryptodev_octeontx);
REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest, test_cryptodev_caam_jr);
diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
index 29a7d4db2b..abd795f54a 100644
--- a/app/test/test_cryptodev.h
+++ b/app/test/test_cryptodev.h
@@ -74,6 +74,7 @@
#define CRYPTODEV_NAME_CN9K_PMD crypto_cn9k
#define CRYPTODEV_NAME_CN10K_PMD crypto_cn10k
#define CRYPTODEV_NAME_MLX5_PMD crypto_mlx5
+#define CRYPTODEV_NAME_UADK_PMD crypto_uadk
enum cryptodev_api_test_type {
--
2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* RE: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (5 preceding siblings ...)
2022-10-19 12:57 ` [PATCH v4 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
@ 2022-10-20 14:44 ` Akhil Goyal
2022-10-20 15:56 ` Zhangfei Gao
2022-10-24 12:54 ` Zhangfei Gao
2022-10-20 14:51 ` Akhil Goyal
7 siblings, 2 replies; 13+ messages in thread
From: Akhil Goyal @ 2022-10-20 14:44 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc
> Introduce a new crypto PMD for hardware accelerators based on UADK [1].
>
> UADK is a framework for user applications to access hardware accelerators.
> UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> the same page table between IOMMU and MMU.
> Thereby user application can directly use virtual address for device dma,
> which enhances the performance as well as easy usability.
>
> [1] https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
>
> Test:
> sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> RTE>>cryptodev_uadk_autotest
> RTE>>quit
>
> Update in v4:
> Akril suggest dpdk use pkg-config, So
> Enable uadk support x86 local build, and support pkg-config.
> Use pkg-config feature for the uadk crypto pmd.
> Add build uadk library steps in doc
> Test on both x86 and arm.
> x86 can build and install, but can not test since no device.
>
I tried with the latest TOT of UADK. This resolved the openssl issue.
But it does not allow me to install UADK into a specific directory.
It installs /usr/local/lib only.
And what is the use of pkg-config if I cannot use a specific directory
To install the libs and headers.
And even if I install at default location, I am seeing below errors while compiling DPDK
[2453/3738] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
../drivers/crypto/uadk/uadk_crypto_pmd.c:9:10: fatal error: rte_comp.h: No such file or directory
9 | #include <rte_comp.h>
| ^~~~~~~~~~~~
compilation terminated.
ninja: Entering directory `build'
[65/1253] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
../drivers/crypto/uadk/uadk_crypto_pmd.c:11:10: fatal error: uadk/wd_cipher.h: No such file or directory
11 | #include <uadk/wd_cipher.h>
> Resend v3:
> Rebase on next/for-main, which just merged the series
> "cryptodev: rework session framework".
>
> Update in v3:
> Split patches according to Akhil's suggestions
> Please split the patches as below.
> 1. introduce driver - create files with meson.build and with probe/remove
> and device ops defined but not implemented.
> You do not need to write empty functions.
> Add basic documentation also which defines what the driver is.
> You can explain the build dependency here.
> 2. define queue structs and setup/remove APIs
> 3. Add data path
> 4. implement cipher op. Add capabilities and documentation of what is
> supported in each of the patches. Add feature flags etc.
> 5. implement auth, add capabilities and documentation
> 6. test app changes.
>
> Update in v2:
> Change uadk_supported_platform to uadk_crypto_version, which matches
> better
> than platform.
> enum uadk_crypto_version {
> UADK_CRYPTO_V2,
> UADK_CRYPTO_V3,
> };
>
> Update in v1, compared with rfc
>
> Suggested from Akhil Goyal <gakhil@marvell.com>
> Only consider crypto PMD first
> Split patch into small (individually compiled) patches.
> Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini
>
> Zhangfei Gao (6):
> crypto/uadk: introduce uadk crypto driver
> crypto/uadk: support basic operations
> crypto/uadk: support enqueue/dequeue operations
> crypto/uadk: support cipher algorithms
> crypto/uadk: support auth algorithms
> test/crypto: add cryptodev_uadk_autotest
>
> MAINTAINERS | 6 +
> app/test/test_cryptodev.c | 7 +
> app/test/test_cryptodev.h | 1 +
> doc/guides/cryptodevs/features/uadk.ini | 55 ++
> doc/guides/cryptodevs/index.rst | 1 +
> doc/guides/cryptodevs/uadk.rst | 88 ++
> drivers/crypto/meson.build | 1 +
> drivers/crypto/uadk/meson.build | 30 +
> drivers/crypto/uadk/uadk_crypto_pmd.c | 1145 +++++++++++++++++++++++
> drivers/crypto/uadk/version.map | 3 +
> 10 files changed, 1337 insertions(+)
> create mode 100644 doc/guides/cryptodevs/features/uadk.ini
> create mode 100644 doc/guides/cryptodevs/uadk.rst
> create mode 100644 drivers/crypto/uadk/meson.build
> create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
> create mode 100644 drivers/crypto/uadk/version.map
>
> --
> 2.36.1
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-20 14:44 ` [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
@ 2022-10-20 15:56 ` Zhangfei Gao
2022-10-20 17:09 ` Akhil Goyal
2022-10-24 12:54 ` Zhangfei Gao
1 sibling, 1 reply; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-20 15:56 UTC (permalink / raw)
To: Akhil Goyal
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, dev, acc
On Thu, 20 Oct 2022 at 22:46, Akhil Goyal <gakhil@marvell.com> wrote:
>
> > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> >
> > UADK is a framework for user applications to access hardware accelerators.
> > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > the same page table between IOMMU and MMU.
> > Thereby user application can directly use virtual address for device dma,
> > which enhances the performance as well as easy usability.
> >
> > [1] https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> > L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> > h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> > 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
> >
> > Test:
> > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > RTE>>cryptodev_uadk_autotest
> > RTE>>quit
> >
> > Update in v4:
> > Akril suggest dpdk use pkg-config, So
> > Enable uadk support x86 local build, and support pkg-config.
> > Use pkg-config feature for the uadk crypto pmd.
> > Add build uadk library steps in doc
> > Test on both x86 and arm.
> > x86 can build and install, but can not test since no device.
> >
> I tried with the latest TOT of UADK. This resolved the openssl issue.
> But it does not allow me to install UADK into a specific directory.
What's the error?
I am sorry, I will check this tomorrow.
> It installs /usr/local/lib only.
> And what is the use of pkg-config if I cannot use a specific directory
> To install the libs and headers.
Test with --prefix
cd uadk
mkdir build
./autogen.sh
./configure --prefix=$PWD/build
make; make install
$ ls build
bin include lib
$ ls build/lib/pkgconfig/
libwd_comp.pc libwd_crypto.pc libwd.pc
export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
dpdk$ ninja -C build
../drivers/crypto/uadk/uadk_crypto_pmd.c:11:28: fatal error:
uadk/wd_cipher.h: No such file or directory
compilation terminated.
[2403/3371] Compiling C object
drivers/libtmp_rte_crypto_octeontx.a.p/crypto_octeontx_otx_cryptodev_ops.c.o
ninja: build stopped: subcommand failed.
Will check tomorrow, a bit late.
Thanks
>
> And even if I install at default location, I am seeing below errors while compiling DPDK
>
> [2453/3738] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
> FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
> ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> ../drivers/crypto/uadk/uadk_crypto_pmd.c:9:10: fatal error: rte_comp.h: No such file or directory
> 9 | #include <rte_comp.h>
> | ^~~~~~~~~~~~
> compilation terminated.
>
> ninja: Entering directory `build'
> [65/1253] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
> FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
> ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> ../drivers/crypto/uadk/uadk_crypto_pmd.c:11:10: fatal error: uadk/wd_cipher.h: No such file or directory
> 11 | #include <uadk/wd_cipher.h>
>
>
> > Resend v3:
> > Rebase on next/for-main, which just merged the series
> > "cryptodev: rework session framework".
> >
> > Update in v3:
> > Split patches according to Akhil's suggestions
> > Please split the patches as below.
> > 1. introduce driver - create files with meson.build and with probe/remove
> > and device ops defined but not implemented.
> > You do not need to write empty functions.
> > Add basic documentation also which defines what the driver is.
> > You can explain the build dependency here.
> > 2. define queue structs and setup/remove APIs
> > 3. Add data path
> > 4. implement cipher op. Add capabilities and documentation of what is
> > supported in each of the patches. Add feature flags etc.
> > 5. implement auth, add capabilities and documentation
> > 6. test app changes.
> >
> > Update in v2:
> > Change uadk_supported_platform to uadk_crypto_version, which matches
> > better
> > than platform.
> > enum uadk_crypto_version {
> > UADK_CRYPTO_V2,
> > UADK_CRYPTO_V3,
> > };
> >
> > Update in v1, compared with rfc
> >
> > Suggested from Akhil Goyal <gakhil@marvell.com>
> > Only consider crypto PMD first
> > Split patch into small (individually compiled) patches.
> > Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini
> >
> > Zhangfei Gao (6):
> > crypto/uadk: introduce uadk crypto driver
> > crypto/uadk: support basic operations
> > crypto/uadk: support enqueue/dequeue operations
> > crypto/uadk: support cipher algorithms
> > crypto/uadk: support auth algorithms
> > test/crypto: add cryptodev_uadk_autotest
> >
> > MAINTAINERS | 6 +
> > app/test/test_cryptodev.c | 7 +
> > app/test/test_cryptodev.h | 1 +
> > doc/guides/cryptodevs/features/uadk.ini | 55 ++
> > doc/guides/cryptodevs/index.rst | 1 +
> > doc/guides/cryptodevs/uadk.rst | 88 ++
> > drivers/crypto/meson.build | 1 +
> > drivers/crypto/uadk/meson.build | 30 +
> > drivers/crypto/uadk/uadk_crypto_pmd.c | 1145 +++++++++++++++++++++++
> > drivers/crypto/uadk/version.map | 3 +
> > 10 files changed, 1337 insertions(+)
> > create mode 100644 doc/guides/cryptodevs/features/uadk.ini
> > create mode 100644 doc/guides/cryptodevs/uadk.rst
> > create mode 100644 drivers/crypto/uadk/meson.build
> > create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
> > create mode 100644 drivers/crypto/uadk/version.map
> >
> > --
> > 2.36.1
>
^ permalink raw reply [flat|nested] 13+ messages in thread* RE: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-20 15:56 ` Zhangfei Gao
@ 2022-10-20 17:09 ` Akhil Goyal
2022-10-21 7:47 ` Zhangfei Gao
0 siblings, 1 reply; 13+ messages in thread
From: Akhil Goyal @ 2022-10-20 17:09 UTC (permalink / raw)
To: Zhangfei Gao
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, dev, acc, thomas
> On Thu, 20 Oct 2022 at 22:46, Akhil Goyal <gakhil@marvell.com> wrote:
> >
> > > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> > >
> > > UADK is a framework for user applications to access hardware accelerators.
> > > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > > the same page table between IOMMU and MMU.
> > > Thereby user application can directly use virtual address for device dma,
> > > which enhances the performance as well as easy usability.
> > >
> > > [1] https://urldefense.proofpoint.com/v2/url?u=https-
> > >
> 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> > > L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> > > h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> > > 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
> > >
> > > Test:
> > > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > > RTE>>cryptodev_uadk_autotest
> > > RTE>>quit
> > >
> > > Update in v4:
> > > Akril suggest dpdk use pkg-config, So
> > > Enable uadk support x86 local build, and support pkg-config.
> > > Use pkg-config feature for the uadk crypto pmd.
> > > Add build uadk library steps in doc
> > > Test on both x86 and arm.
> > > x86 can build and install, but can not test since no device.
> > >
> > I tried with the latest TOT of UADK. This resolved the openssl issue.
> > But it does not allow me to install UADK into a specific directory.
>
> What's the error?
>
> I am sorry, I will check this tomorrow.
>
> > It installs /usr/local/lib only.
> > And what is the use of pkg-config if I cannot use a specific directory
> > To install the libs and headers.
>
> Test with --prefix
>
> cd uadk
> mkdir build
> ./autogen.sh
> ./configure --prefix=$PWD/build
> make; make install
>
> $ ls build
> bin include lib
>
> $ ls build/lib/pkgconfig/
> libwd_comp.pc libwd_crypto.pc libwd.pc
>
> export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
>
Above sequence worked. I would suggest to write this clearly in uadk.rst.
Also I made a few below changes to make compilation work.
Here, I see that you are creating a dependency on compressdev to compile a crypto
Driver.
Do you really need that?
I believe you should segregate the compressdev related stuff in compress PMD.
--------------------------------------------------------------------------------------------------------
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 8f09e4390e..e00398414d 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -3,7 +3,7 @@
Copyright 2022-2023 Linaro ltd.
UADK Crypto Poll Mode Driver
-=======================================================
+============================
UADK crypto PMD provides poll mode driver
All cryptographic operations are using UADK crypto API.
@@ -38,7 +38,7 @@ Hash algorithms:
* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
Test steps
------------
+----------
.. code-block:: console
@@ -61,7 +61,7 @@ Test steps
3. Run test app
Dependency
-------------
+----------
UADK crypto PMD relies on UADK library [1]
@@ -72,7 +72,7 @@ As a result, user application can directly use virtual address for device dma,
which enhances the performance as well as easy usability.
Build & Install UADK
------------
+--------------------
.. code-block:: console
diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build
index f6fae0a239..66418f1878 100644
--- a/drivers/crypto/uadk/meson.build
+++ b/drivers/crypto/uadk/meson.build
@@ -12,7 +12,7 @@ sources = files(
'uadk_crypto_pmd.c',
)
-deps += 'bus_vdev'
+deps += ['bus_vdev', 'compressdev']
dep = dependency('libwd_crypto', required: false, method: 'pkg-config')
if not dep.found()
build = false
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index a166efa36c..2f8ef3562d 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -8,9 +8,9 @@
#include <rte_bus_vdev.h>
#include <rte_comp.h>
#include <stdlib.h>
-#include <uadk/wd_cipher.h>
-#include <uadk/wd_digest.h>
-#include <uadk/wd_sched.h>
+#include <wd_cipher.h>
+#include <wd_digest.h>
+#include <wd_sched.h>
/* Maximum length for digest (SHA-512 needs 64 bytes) */
#define DIGEST_LENGTH_MAX 64
> dpdk$ ninja -C build
> ../drivers/crypto/uadk/uadk_crypto_pmd.c:11:28: fatal error:
> uadk/wd_cipher.h: No such file or directory
> compilation terminated.
> [2403/3371] Compiling C object
> drivers/libtmp_rte_crypto_octeontx.a.p/crypto_octeontx_otx_cryptodev_ops.c.
> o
> ninja: build stopped: subcommand failed.
>
> Will check tomorrow, a bit late.
>
> Thanks
>
>
> >
> > And even if I install at default location, I am seeing below errors while
> compiling DPDK
> >
> > [2453/3738] Compiling C object
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o'.
> > FAILED:
> drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd
> .c.o
> > ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -
> I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -
> I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -
> Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -
> I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal
> -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -
> Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -
> I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -
> I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -
> D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h
> -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -
> Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-
> definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -
> Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -
> Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -
> DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-
> truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o' -MF
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o.d' -o
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> > ../drivers/crypto/uadk/uadk_crypto_pmd.c:9:10: fatal error: rte_comp.h: No
> such file or directory
> > 9 | #include <rte_comp.h>
> > | ^~~~~~~~~~~~
> > compilation terminated.
> >
> > ninja: Entering directory `build'
> > [65/1253] Compiling C object
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o'.
> > FAILED:
> drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd
> .c.o
> > ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -
> I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -
> I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -
> Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -
> I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal
> -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -
> Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -
> I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -
> I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -
> D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h
> -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -
> Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-
> definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -
> Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -
> Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -
> DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-
> truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o' -MF
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o.d' -o
> 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pm
> d.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> > ../drivers/crypto/uadk/uadk_crypto_pmd.c:11:10: fatal error:
> uadk/wd_cipher.h: No such file or directory
> > 11 | #include <uadk/wd_cipher.h>
>
>
> >
> >
> > > Resend v3:
> > > Rebase on next/for-main, which just merged the series
> > > "cryptodev: rework session framework".
> > >
> > > Update in v3:
> > > Split patches according to Akhil's suggestions
> > > Please split the patches as below.
> > > 1. introduce driver - create files with meson.build and with probe/remove
> > > and device ops defined but not implemented.
> > > You do not need to write empty functions.
> > > Add basic documentation also which defines what the driver is.
> > > You can explain the build dependency here.
> > > 2. define queue structs and setup/remove APIs
> > > 3. Add data path
> > > 4. implement cipher op. Add capabilities and documentation of what is
> > > supported in each of the patches. Add feature flags etc.
> > > 5. implement auth, add capabilities and documentation
> > > 6. test app changes.
> > >
> > > Update in v2:
> > > Change uadk_supported_platform to uadk_crypto_version, which matches
> > > better
> > > than platform.
> > > enum uadk_crypto_version {
> > > UADK_CRYPTO_V2,
> > > UADK_CRYPTO_V3,
> > > };
> > >
> > > Update in v1, compared with rfc
> > >
> > > Suggested from Akhil Goyal <gakhil@marvell.com>
> > > Only consider crypto PMD first
> > > Split patch into small (individually compiled) patches.
> > > Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini
> > >
> > > Zhangfei Gao (6):
> > > crypto/uadk: introduce uadk crypto driver
> > > crypto/uadk: support basic operations
> > > crypto/uadk: support enqueue/dequeue operations
> > > crypto/uadk: support cipher algorithms
> > > crypto/uadk: support auth algorithms
> > > test/crypto: add cryptodev_uadk_autotest
> > >
> > > MAINTAINERS | 6 +
> > > app/test/test_cryptodev.c | 7 +
> > > app/test/test_cryptodev.h | 1 +
> > > doc/guides/cryptodevs/features/uadk.ini | 55 ++
> > > doc/guides/cryptodevs/index.rst | 1 +
> > > doc/guides/cryptodevs/uadk.rst | 88 ++
> > > drivers/crypto/meson.build | 1 +
> > > drivers/crypto/uadk/meson.build | 30 +
> > > drivers/crypto/uadk/uadk_crypto_pmd.c | 1145
> +++++++++++++++++++++++
> > > drivers/crypto/uadk/version.map | 3 +
> > > 10 files changed, 1337 insertions(+)
> > > create mode 100644 doc/guides/cryptodevs/features/uadk.ini
> > > create mode 100644 doc/guides/cryptodevs/uadk.rst
> > > create mode 100644 drivers/crypto/uadk/meson.build
> > > create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
> > > create mode 100644 drivers/crypto/uadk/version.map
> > >
> > > --
> > > 2.36.1
> >
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-20 17:09 ` Akhil Goyal
@ 2022-10-21 7:47 ` Zhangfei Gao
0 siblings, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-21 7:47 UTC (permalink / raw)
To: Akhil Goyal
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, dev, acc, thomas
On Fri, 21 Oct 2022 at 01:12, Akhil Goyal <gakhil@marvell.com> wrote:
>
> > On Thu, 20 Oct 2022 at 22:46, Akhil Goyal <gakhil@marvell.com> wrote:
> > >
> > > > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> > > >
> > > > UADK is a framework for user applications to access hardware accelerators.
> > > > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > > > the same page table between IOMMU and MMU.
> > > > Thereby user application can directly use virtual address for device dma,
> > > > which enhances the performance as well as easy usability.
> > > >
> > > > [1] https://urldefense.proofpoint.com/v2/url?u=https-
> > > >
> > 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> > > > L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> > > > h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> > > > 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
> > > >
> > > > Test:
> > > > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > > > RTE>>cryptodev_uadk_autotest
> > > > RTE>>quit
> > > >
> > > > Update in v4:
> > > > Akril suggest dpdk use pkg-config, So
> > > > Enable uadk support x86 local build, and support pkg-config.
> > > > Use pkg-config feature for the uadk crypto pmd.
> > > > Add build uadk library steps in doc
> > > > Test on both x86 and arm.
> > > > x86 can build and install, but can not test since no device.
> > > >
> > > I tried with the latest TOT of UADK. This resolved the openssl issue.
> > > But it does not allow me to install UADK into a specific directory.
> >
> > What's the error?
> >
> > I am sorry, I will check this tomorrow.
> >
> > > It installs /usr/local/lib only.
> > > And what is the use of pkg-config if I cannot use a specific directory
> > > To install the libs and headers.
> >
> > Test with --prefix
> >
> > cd uadk
> > mkdir build
> > ./autogen.sh
> > ./configure --prefix=$PWD/build
> > make; make install
> >
> > $ ls build
> > bin include lib
> >
> > $ ls build/lib/pkgconfig/
> > libwd_comp.pc libwd_crypto.pc libwd.pc
> >
> > export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
> >
>
> Above sequence worked. I would suggest to write this clearly in uadk.rst.
Have updated to
+Test steps
+----------
+
+ .. code-block:: console
+
+ 1. Build UADK
+ $ git clone https://github.com/Linaro/uadk.git
+ $ cd uadk
+ $ mkdir build
+ $ ./autogen.sh
+ $ ./configure --prefix=$PWD/build
+ $ make
+ $ make install
+
+ * Without --prefix, UADK will be installed to /usr/local/lib by default
+ * If get error:"cannot find -lnuma", please install the libnuma-dev
+
+ 2. Run pkg-config libwd to ensure env is setup correctly
+ $ export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
+ $ pkg-config libwd --cflags --libs
+ -I/usr/local/include -L/usr/local/lib -lwd
+
+ * export PKG_CONFIG_PATH is required on demand,
+ not needed if UADK is installed to /usr/local/lib
+
+ 3. Build DPDK
+ $ cd dpdk
+ $ mkdir build
+ $ meson build (--reconfigure)
+ $ cd build
+ $ ninja
+ $ sudo ninja install
+
+ 4. Prepare hugepage for dpdk
+ $ echo 1024 >
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 >
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 >
/sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 >
/sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages
+ $ mkdir -p /mnt/huge_2mb
+ $ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
+
+ 5. Run test app
+
https://github.com/Linaro/dpdk/blob/next-9.11-v5/doc/guides/cryptodevs/uadk.rst
>
> Also I made a few below changes to make compilation work.
> Here, I see that you are creating a dependency on compressdev to compile a crypto
> Driver.
> Do you really need that?
> I believe you should segregate the compressdev related stuff in compress PMD.
Sorry, has updated.
> --------------------------------------------------------------------------------------------------------
>
> diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
> index 8f09e4390e..e00398414d 100644
> --- a/doc/guides/cryptodevs/uadk.rst
> +++ b/doc/guides/cryptodevs/uadk.rst
> @@ -3,7 +3,7 @@
> Copyright 2022-2023 Linaro ltd.
>
> UADK Crypto Poll Mode Driver
> -=======================================================
> +============================
>
> UADK crypto PMD provides poll mode driver
> All cryptographic operations are using UADK crypto API.
> @@ -38,7 +38,7 @@ Hash algorithms:
> * ``RTE_CRYPTO_AUTH_SHA512_HMAC``
>
> Test steps
> ------------
> +----------
>
> .. code-block:: console
>
> @@ -61,7 +61,7 @@ Test steps
> 3. Run test app
>
> Dependency
> -------------
> +----------
>
> UADK crypto PMD relies on UADK library [1]
>
> @@ -72,7 +72,7 @@ As a result, user application can directly use virtual address for device dma,
> which enhances the performance as well as easy usability.
>
> Build & Install UADK
> ------------
> +--------------------
>
> .. code-block:: console
>
> diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build
> index f6fae0a239..66418f1878 100644
> --- a/drivers/crypto/uadk/meson.build
> +++ b/drivers/crypto/uadk/meson.build
> @@ -12,7 +12,7 @@ sources = files(
> 'uadk_crypto_pmd.c',
> )
>
> -deps += 'bus_vdev'
> +deps += ['bus_vdev', 'compressdev']
> dep = dependency('libwd_crypto', required: false, method: 'pkg-config')
> if not dep.found()
> build = false
> diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
> index a166efa36c..2f8ef3562d 100644
> --- a/drivers/crypto/uadk/uadk_crypto_pmd.c
> +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
> @@ -8,9 +8,9 @@
> #include <rte_bus_vdev.h>
> #include <rte_comp.h>
> #include <stdlib.h>
> -#include <uadk/wd_cipher.h>
> -#include <uadk/wd_digest.h>
> -#include <uadk/wd_sched.h>
> +#include <wd_cipher.h>
> +#include <wd_digest.h>
> +#include <wd_sched.h>
>
> /* Maximum length for digest (SHA-512 needs 64 bytes) */
> #define DIGEST_LENGTH_MAX 64
>
>
Thanks Akhil
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-20 14:44 ` [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
2022-10-20 15:56 ` Zhangfei Gao
@ 2022-10-24 12:54 ` Zhangfei Gao
1 sibling, 0 replies; 13+ messages in thread
From: Zhangfei Gao @ 2022-10-24 12:54 UTC (permalink / raw)
To: Akhil Goyal
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, dev, acc
On Thu, 20 Oct 2022 at 22:46, Akhil Goyal <gakhil@marvell.com> wrote:
>
> > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> >
> > UADK is a framework for user applications to access hardware accelerators.
> > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > the same page table between IOMMU and MMU.
> > Thereby user application can directly use virtual address for device dma,
> > which enhances the performance as well as easy usability.
> >
> > [1] https://urldefense.proofpoint.com/v2/url?u=https-
> > 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> > L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> > h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> > 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
> >
> > Test:
> > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > RTE>>cryptodev_uadk_autotest
> > RTE>>quit
> >
> > Update in v4:
> > Akril suggest dpdk use pkg-config, So
> > Enable uadk support x86 local build, and support pkg-config.
> > Use pkg-config feature for the uadk crypto pmd.
> > Add build uadk library steps in doc
> > Test on both x86 and arm.
> > x86 can build and install, but can not test since no device.
> >
> I tried with the latest TOT of UADK. This resolved the openssl issue.
> But it does not allow me to install UADK into a specific directory.
> It installs /usr/local/lib only.
> And what is the use of pkg-config if I cannot use a specific directory
> To install the libs and headers.
>
> And even if I install at default location, I am seeing below errors while compiling DPDK
>
> [2453/3738] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
> FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
> ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> ../drivers/crypto/uadk/uadk_crypto_pmd.c:9:10: fatal error: rte_comp.h: No such file or directory
> 9 | #include <rte_comp.h>
> | ^~~~~~~~~~~~
> compilation terminated.
>
> ninja: Entering directory `build'
> [65/1253] Compiling C object 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o'.
> FAILED: drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o
> ccache cc -Idrivers/a715181@@tmp_rte_crypto_uadk@sta -Idrivers -I../drivers -Idrivers/crypto/uadk -I../drivers/crypto/uadk -Ilib/cryptodev -I../lib/cryptodev -I. -I../ -Iconfig -I../config -Ilib/eal/include -I../lib/eal/include -Ilib/eal/linux/include -I../lib/eal/linux/include -Ilib/eal/x86/include -I../lib/eal/x86/include -Ilib/eal/common -I../lib/eal/common -Ilib/eal -I../lib/eal -Ilib/kvargs -I../lib/kvargs -Ilib/telemetry/../metrics -I../lib/telemetry/../metrics -Ilib/telemetry -I../lib/telemetry -Ilib/mbuf -I../lib/mbuf -Ilib/mempool -I../lib/mempool -Ilib/ring -I../lib/ring -Ilib/rcu -I../lib/rcu -Idrivers/bus/vdev -I../drivers/bus/vdev -I/usr/local/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -O3 -include rte_config.h -Wcast-qual -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-address-of-packed-member -Wno-packed-not-aligned -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -DALLOW_INTERNAL_API -Wno-format-truncation -DRTE_LOG_DEFAULT_LOGTYPE=pmd.crypto.uadk -MD -MQ 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -MF 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o.d' -o 'drivers/a715181@@tmp_rte_crypto_uadk@sta/crypto_uadk_uadk_crypto_pmd.c.o' -c ../drivers/crypto/uadk/uadk_crypto_pmd.c
> ../drivers/crypto/uadk/uadk_crypto_pmd.c:11:10: fatal error: uadk/wd_cipher.h: No such file or directory
> 11 | #include <uadk/wd_cipher.h>
>
We originally install header file under uadk folder, like
/usr/local/include/uadk/xx.h
After switch to pkgconfig, the uadk is removed, like /usr/local/include/xx.h
After re-thinking, we still think using the folder uadk will be better
and cleaner, without polluting the system, like openssl, also for
back-compatibility.
So fix the uadk lib by using pkginclude_HEADERS and
nobase_pkginclude_HEADERS accordingly.
Thanks
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (6 preceding siblings ...)
2022-10-20 14:44 ` [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
@ 2022-10-20 14:51 ` Akhil Goyal
7 siblings, 0 replies; 13+ messages in thread
From: Akhil Goyal @ 2022-10-20 14:51 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella
Cc: dev, acc
> Introduce a new crypto PMD for hardware accelerators based on UADK [1].
>
> UADK is a framework for user applications to access hardware accelerators.
> UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> the same page table between IOMMU and MMU.
> Thereby user application can directly use virtual address for device dma,
> which enhances the performance as well as easy usability.
>
> [1] https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk&d=DwIDAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=AkCizMeraG64B9u-
> h4gp5S2CYP3SiD5dpvFqvj2WHC4Cfuw6TbzZSeCk1Ryz-qLo&s=Tm7UGDJ-
> 3QUjCzOkIRUG_tjJA3ckOdK6kSOxuk7V5PQ&e=
>
> Test:
> sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> RTE>>cryptodev_uadk_autotest
> RTE>>quit
>
> Update in v4:
> Akril suggest dpdk use pkg-config, So
> Enable uadk support x86 local build, and support pkg-config.
> Use pkg-config feature for the uadk crypto pmd.
> Add build uadk library steps in doc
> Test on both x86 and arm.
> x86 can build and install, but can not test since no device.
>
Please fix documentation build errors as well reported by CI
http://mails.dpdk.org/archives/test-report/2022-October/316805.html
^ permalink raw reply [flat|nested] 13+ messages in thread