From: Zhangfei Gao <zhangfei.gao@linaro.org>
To: Akhil Goyal <gakhil@marvell.com>,
Declan Doherty <declan.doherty@intel.com>,
Fan Zhang <royzhang1980@gmail.com>,
Ashish Gupta <ashish.gupta@marvell.com>,
Ray Kinsella <mdr@ashroe.eu>
Cc: dev@dpdk.org, acc@openeuler.org, Zhangfei Gao <zhangfei.gao@linaro.org>
Subject: [PATCH v4 5/6] crypto/uadk: support auth algorithms
Date: Wed, 19 Oct 2022 20:57:52 +0800 [thread overview]
Message-ID: <20221019125753.1700071-6-zhangfei.gao@linaro.org> (raw)
In-Reply-To: <20221019125753.1700071-1-zhangfei.gao@linaro.org>
Hash algorithms:
* ``RTE_CRYPTO_AUTH_MD5``
* ``RTE_CRYPTO_AUTH_MD5_HMAC``
* ``RTE_CRYPTO_AUTH_SHA1``
* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
* ``RTE_CRYPTO_AUTH_SHA224``
* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
* ``RTE_CRYPTO_AUTH_SHA256``
* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
* ``RTE_CRYPTO_AUTH_SHA384``
* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
* ``RTE_CRYPTO_AUTH_SHA512``
* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/features/uadk.ini | 12 +
doc/guides/cryptodevs/uadk.rst | 15 +
drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++
3 files changed, 486 insertions(+)
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
index 005e08ac8d..2e8a37a2b3 100644
--- a/doc/guides/cryptodevs/features/uadk.ini
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -25,6 +25,18 @@ DES CBC = Y
; Supported authentication algorithms of the 'uadk' crypto driver.
;
[Auth]
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA224 = Y
+SHA224 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
;
; Supported AEAD algorithms of the 'uadk' crypto driver.
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 4e26127e0e..8f09e4390e 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -22,6 +22,21 @@ Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_DES_CBC``
+Hash algorithms:
+
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+
Test steps
-----------
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 8e2e3b7877..a166efa36c 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -33,11 +33,15 @@ struct uadk_qp {
enum uadk_chain_order {
UADK_CHAIN_ONLY_CIPHER,
+ UADK_CHAIN_ONLY_AUTH,
+ UADK_CHAIN_CIPHER_AUTH,
+ UADK_CHAIN_AUTH_CIPHER,
UADK_CHAIN_NOT_SUPPORTED
};
struct uadk_crypto_session {
handle_t handle_cipher;
+ handle_t handle_digest;
enum uadk_chain_order chain_order;
/* IV parameters */
@@ -51,6 +55,13 @@ struct uadk_crypto_session {
enum rte_crypto_cipher_operation direction;
struct wd_cipher_req req;
} cipher;
+
+ /* Authentication Parameters */
+ struct {
+ struct wd_digest_req req;
+ enum rte_crypto_auth_operation operation;
+ uint16_t digest_length;
+ } auth;
} __rte_cache_aligned;
enum uadk_crypto_version {
@@ -60,6 +71,7 @@ enum uadk_crypto_version {
struct uadk_crypto_priv {
bool env_cipher_init;
+ bool env_auth_init;
enum uadk_crypto_version version;
} __rte_cache_aligned;
@@ -73,6 +85,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
## __VA_ARGS__)
static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
{ /* AES ECB */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
@@ -189,6 +447,11 @@ uadk_crypto_pmd_close(struct rte_cryptodev *dev)
priv->env_cipher_init = false;
}
+ if (priv->env_auth_init) {
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ }
+
return 0;
}
@@ -347,9 +610,19 @@ uadk_get_chain_order(const struct rte_crypto_sym_xform *xform)
enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;
if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ if (xform->next == NULL)
+ res = UADK_CHAIN_ONLY_AUTH;
+ else if (xform->next->type ==
+ RTE_CRYPTO_SYM_XFORM_CIPHER)
+ res = UADK_CHAIN_AUTH_CIPHER;
+ }
+
if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
if (xform->next == NULL)
res = UADK_CHAIN_ONLY_CIPHER;
+ else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ res = UADK_CHAIN_CIPHER_AUTH;
}
}
@@ -436,12 +709,119 @@ uadk_set_session_cipher_parameters(struct rte_cryptodev *dev,
return ret;
}
+/* Set session auth parameters */
+static int
+uadk_set_session_auth_parameters(struct rte_cryptodev *dev,
+ struct uadk_crypto_session *sess,
+ struct rte_crypto_sym_xform *xform)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+ struct wd_digest_sess_setup setup = {0};
+ struct sched_params params = {0};
+ int ret;
+
+ if (!priv->env_auth_init) {
+ ret = wd_digest_env_init(NULL);
+ if (ret < 0)
+ return -EINVAL;
+ priv->env_auth_init = true;
+ }
+
+ sess->auth.operation = xform->auth.op;
+ sess->auth.digest_length = xform->auth.digest_length;
+
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_MD5) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_MD5;
+ sess->auth.req.out_buf_bytes = 16;
+ sess->auth.req.out_bytes = 16;
+ break;
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA1) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA1;
+ sess->auth.req.out_buf_bytes = 20;
+ sess->auth.req.out_bytes = 20;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA224) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA224;
+ sess->auth.req.out_buf_bytes = 28;
+ sess->auth.req.out_bytes = 28;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA256) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA256;
+ sess->auth.req.out_buf_bytes = 32;
+ sess->auth.req.out_bytes = 32;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA384) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA384;
+ sess->auth.req.out_buf_bytes = 48;
+ sess->auth.req.out_bytes = 48;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA512) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA512;
+ sess->auth.req.out_buf_bytes = 64;
+ sess->auth.req.out_bytes = 64;
+ break;
+ default:
+ ret = -ENOTSUP;
+ goto env_uninit;
+ }
+
+ params.numa_id = -1; /* choose nearby numa node */
+ setup.sched_param = ¶ms;
+ sess->handle_digest = wd_digest_alloc_sess(&setup);
+ if (!sess->handle_digest) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ /* if mode is HMAC, should set key */
+ if (setup.mode == WD_DIGEST_HMAC) {
+ ret = wd_digest_set_key(sess->handle_digest,
+ xform->auth.key.data,
+ xform->auth.key.length);
+ if (ret) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+ }
+
+ return 0;
+
+env_uninit:
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ return ret;
+}
+
static int
uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
struct rte_crypto_sym_xform *xform,
struct rte_cryptodev_sym_session *session)
{
struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct rte_crypto_sym_xform *auth_xform = NULL;
struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
int ret;
@@ -455,6 +835,17 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
case UADK_CHAIN_ONLY_CIPHER:
cipher_xform = xform;
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ auth_xform = xform;
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
default:
return -ENOTSUP;
}
@@ -468,6 +859,15 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
}
}
+ if (auth_xform) {
+ ret = uadk_set_session_auth_parameters(dev, sess, auth_xform);
+ if (ret != 0) {
+ UADK_LOG(ERR,
+ "Invalid/unsupported auth parameters");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -486,6 +886,11 @@ uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused,
wd_cipher_free_sess(sess->handle_cipher);
sess->handle_cipher = 0;
}
+
+ if (sess->handle_digest) {
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ }
}
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
@@ -539,6 +944,49 @@ uadk_process_cipher_op(struct rte_crypto_op *op,
op->status = RTE_COMP_OP_STATUS_ERROR;
}
+static void
+uadk_process_auth_op(struct uadk_qp *qp, struct rte_crypto_op *op,
+ struct uadk_crypto_session *sess,
+ struct rte_mbuf *msrc, struct rte_mbuf *mdst)
+{
+ uint32_t srclen = op->sym->auth.data.length;
+ uint32_t off = op->sym->auth.data.offset;
+ uint8_t *dst = qp->temp_digest;
+ int ret;
+
+ if (!sess) {
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+
+ sess->auth.req.in = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off);
+ sess->auth.req.in_bytes = srclen;
+ sess->auth.req.out = dst;
+
+ do {
+ ret = wd_do_digest_sync(sess->handle_digest, &sess->auth.req);
+ } while (ret == -WD_EBUSY);
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+ if (memcmp(dst, op->sym->auth.digest.data,
+ sess->auth.digest_length) != 0) {
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ }
+ } else {
+ uint8_t *auth_dst;
+
+ auth_dst = op->sym->auth.digest.data;
+ if (auth_dst == NULL)
+ auth_dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *,
+ op->sym->auth.data.offset +
+ op->sym->auth.data.length);
+ memcpy(auth_dst, dst, sess->auth.digest_length);
+ }
+
+ if (ret)
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+}
+
static uint16_t
uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
@@ -566,6 +1014,17 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
case UADK_CHAIN_ONLY_CIPHER:
uadk_process_cipher_op(op, sess, msrc, mdst);
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ uadk_process_auth_op(qp, op, sess, mdst, mdst);
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ break;
default:
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
break;
--
2.36.1
next prev parent reply other threads:[~2022-10-19 13:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 12:57 [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 1/6] " Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 2/6] crypto/uadk: support basic operations Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 3/6] crypto/uadk: support enqueue/dequeue operations Zhangfei Gao
2022-10-19 12:57 ` [PATCH v4 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
2022-10-19 12:57 ` Zhangfei Gao [this message]
2022-10-19 12:57 ` [PATCH v4 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
2022-10-20 14:44 ` [EXT] [PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
2022-10-20 15:56 ` Zhangfei Gao
2022-10-20 17:09 ` Akhil Goyal
2022-10-21 7:47 ` Zhangfei Gao
2022-10-24 12:54 ` Zhangfei Gao
2022-10-20 14:51 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221019125753.1700071-6-zhangfei.gao@linaro.org \
--to=zhangfei.gao@linaro.org \
--cc=acc@openeuler.org \
--cc=ashish.gupta@marvell.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=mdr@ashroe.eu \
--cc=royzhang1980@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).