* [PATCH resend v5 1/6] crypto/uadk: introduce uadk crypto driver
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-25 14:08 ` [EXT] " Akhil Goyal
2022-10-24 13:44 ` [PATCH resend v5 2/6] crypto/uadk: support basic operations Zhangfei Gao
` (5 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
Introduce a new crypto PMD for hardware accelerators based on UADK [1].
UADK is a framework for user applications to access hardware accelerators.
UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
the same page table between IOMMU and MMU.
Thereby user application can directly use virtual address for device dma,
which enhances the performance as well as easy usability.
This patch adds the basic framework.
[1] https://github.com/Linaro/uadk
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
MAINTAINERS | 6 ++
doc/guides/cryptodevs/features/uadk.ini | 33 +++++++
doc/guides/cryptodevs/index.rst | 1 +
doc/guides/cryptodevs/uadk.rst | 73 ++++++++++++++
drivers/crypto/meson.build | 1 +
drivers/crypto/uadk/meson.build | 30 ++++++
drivers/crypto/uadk/uadk_crypto_pmd.c | 121 ++++++++++++++++++++++++
drivers/crypto/uadk/version.map | 3 +
8 files changed, 268 insertions(+)
create mode 100644 doc/guides/cryptodevs/features/uadk.ini
create mode 100644 doc/guides/cryptodevs/uadk.rst
create mode 100644 drivers/crypto/uadk/meson.build
create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
create mode 100644 drivers/crypto/uadk/version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f56111323..bf9baa9070 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1060,6 +1060,12 @@ M: Kai Ji <kai.ji@intel.com>
F: drivers/crypto/scheduler/
F: doc/guides/cryptodevs/scheduler.rst
+HiSilicon UADK crypto
+M: Zhangfei Gao <zhangfei.gao@linaro.org>
+F: drivers/crypto/uadk/
+F: doc/guides/cryptodevs/uadk.rst
+F: doc/guides/cryptodevs/features/uadk.ini
+
Intel QuickAssist
M: Kai Ji <kai.ji@intel.com>
F: drivers/crypto/qat/
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
new file mode 100644
index 0000000000..df5ad40e3d
--- /dev/null
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -0,0 +1,33 @@
+;
+; Supported features of the 'uadk' crypto driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+HW Accelerated = Y
+
+;
+; Supported crypto algorithms of the 'uadk' crypto driver.
+;
+[Cipher]
+
+;
+; Supported authentication algorithms of the 'uadk' crypto driver.
+;
+[Auth]
+
+;
+; Supported AEAD algorithms of the 'uadk' crypto driver.
+;
+[AEAD]
+
+;
+; Supported Asymmetric algorithms of the 'uadk' crypto driver.
+;
+[Asymmetric]
+
+;
+; Supported Operating systems of the 'uadk' crypto driver.
+;
+[OS]
+Linux = Y
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 39cca6dbde..cb4ce227e9 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -30,5 +30,6 @@ Crypto Device Drivers
scheduler
snow3g
qat
+ uadk
virtio
zuc
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
new file mode 100644
index 0000000000..1dfaab73c8
--- /dev/null
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+ Copyright 2022-2023 Linaro ltd.
+
+UADK Crypto Poll Mode Driver
+=======================================================
+
+UADK crypto PMD provides poll mode driver
+All cryptographic operations are using UADK crypto API.
+Hardware accelerators using UADK are supposed to be supported.
+
+
+Features
+--------
+
+UADK crypto PMD has support for:
+
+
+Test steps
+----------
+
+ .. code-block:: console
+
+ 1. Build UADK
+ $ git clone https://github.com/Linaro/uadk.git
+ $ cd uadk
+ $ mkdir build
+ $ ./autogen.sh
+ $ ./configure --prefix=$PWD/build
+ $ make
+ $ make install
+
+ * Without --prefix, UADK will be installed to /usr/local/lib by default
+ * If get error:"cannot find -lnuma", please install the libnuma-dev
+
+ 2. Run pkg-config libwd to ensure env is setup correctly
+ $ export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
+ $ pkg-config libwd --cflags --libs
+ -I/usr/local/include -L/usr/local/lib -lwd
+
+ * export PKG_CONFIG_PATH is required on demand,
+ not needed if UADK is installed to /usr/local/lib
+
+ 3. Build DPDK
+ $ cd dpdk
+ $ mkdir build
+ $ meson build (--reconfigure)
+ $ cd build
+ $ ninja
+ $ sudo ninja install
+
+ 4. Prepare hugepage for dpdk
+ $ echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 > /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages
+ $ echo 1024 > /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages
+ $ mkdir -p /mnt/huge_2mb
+ $ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
+
+ 5. Run test app
+
+Dependency
+----------
+
+UADK crypto PMD relies on UADK library [1]
+
+UADK is a framework for user applications to access hardware accelerators.
+UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
+the same page table between IOMMU and MMU.
+As a result, user application can directly use virtual address for device dma,
+which enhances the performance as well as easy usability.
+
+[1] https://github.com/Linaro/uadk
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 147b8cf633..ee5377deff 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -18,6 +18,7 @@ drivers = [
'octeontx',
'openssl',
'scheduler',
+ 'uadk',
'virtio',
]
diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build
new file mode 100644
index 0000000000..f6fae0a239
--- /dev/null
+++ b/drivers/crypto/uadk/meson.build
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+# Copyright 2022-2023 Linaro ltd.
+
+if not is_linux
+ build = false
+ reason = 'only supported on Linux'
+ subdir_done()
+endif
+
+sources = files(
+ 'uadk_crypto_pmd.c',
+)
+
+deps += 'bus_vdev'
+dep = dependency('libwd_crypto', required: false, method: 'pkg-config')
+if not dep.found()
+ build = false
+ reason = 'missing dependency, "libwd_crypto"'
+else
+ ext_deps += dep
+endif
+
+dep = dependency('libwd', required: false, method: 'pkg-config')
+if not dep.found()
+ build = false
+ reason = 'missing dependency, "libwd"'
+else
+ ext_deps += dep
+endif
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
new file mode 100644
index 0000000000..2ae2b33bd7
--- /dev/null
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
+ * Copyright 2022-2023 Linaro ltd.
+ */
+
+#include <bus_vdev_driver.h>
+#include <cryptodev_pmd.h>
+#include <rte_bus_vdev.h>
+#include <stdlib.h>
+#include <uadk/wd_cipher.h>
+#include <uadk/wd_digest.h>
+#include <uadk/wd_sched.h>
+
+enum uadk_crypto_version {
+ UADK_CRYPTO_V2,
+ UADK_CRYPTO_V3,
+};
+
+struct uadk_crypto_priv {
+ enum uadk_crypto_version version;
+} __rte_cache_aligned;
+
+static uint8_t uadk_cryptodev_driver_id;
+
+RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
+
+#define UADK_LOG(level, fmt, ...) \
+ rte_log(RTE_LOG_ ## level, uadk_crypto_logtype, \
+ "%s() line %u: " fmt "\n", __func__, __LINE__, \
+ ## __VA_ARGS__)
+
+static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
+ .dev_configure = NULL,
+ .dev_start = NULL,
+ .dev_stop = NULL,
+ .dev_close = NULL,
+ .stats_get = NULL,
+ .stats_reset = NULL,
+ .dev_infos_get = NULL,
+ .queue_pair_setup = NULL,
+ .queue_pair_release = NULL,
+ .sym_session_get_size = NULL,
+ .sym_session_configure = NULL,
+ .sym_session_clear = NULL,
+};
+
+static int
+uadk_cryptodev_probe(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev_pmd_init_params init_params = {
+ .name = "",
+ .private_data_size = sizeof(struct uadk_crypto_priv),
+ .max_nb_queue_pairs =
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
+ };
+ enum uadk_crypto_version version = UADK_CRYPTO_V2;
+ struct uadk_crypto_priv *priv;
+ struct rte_cryptodev *dev;
+ struct uacce_dev *udev;
+ const char *name;
+
+ udev = wd_get_accel_dev("cipher");
+ if (!udev)
+ return -ENODEV;
+
+ if (!strcmp(udev->api, "hisi_qm_v2"))
+ version = UADK_CRYPTO_V2;
+
+ free(udev);
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+
+ dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params);
+ if (dev == NULL) {
+ UADK_LOG(ERR, "driver %s: create failed", init_params.name);
+ return -ENODEV;
+ }
+
+ dev->dev_ops = &uadk_crypto_pmd_ops;
+ dev->driver_id = uadk_cryptodev_driver_id;
+ dev->dequeue_burst = NULL;
+ dev->enqueue_burst = NULL;
+ dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
+ priv = dev->data->dev_private;
+ priv->version = version;
+
+ rte_cryptodev_pmd_probing_finish(dev);
+
+ return 0;
+}
+
+static int
+uadk_cryptodev_remove(struct rte_vdev_device *vdev)
+{
+ struct rte_cryptodev *cryptodev;
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+
+ cryptodev = rte_cryptodev_pmd_get_named_dev(name);
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ return rte_cryptodev_pmd_destroy(cryptodev);
+}
+
+static struct rte_vdev_driver uadk_crypto_pmd = {
+ .probe = uadk_cryptodev_probe,
+ .remove = uadk_cryptodev_remove,
+};
+
+static struct cryptodev_driver uadk_crypto_drv;
+
+#define UADK_CRYPTO_DRIVER_NAME crypto_uadk
+RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME, uadk_crypto_pmd);
+RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv, uadk_crypto_pmd.driver,
+ uadk_cryptodev_driver_id);
diff --git a/drivers/crypto/uadk/version.map b/drivers/crypto/uadk/version.map
new file mode 100644
index 0000000000..c2e0723b4c
--- /dev/null
+++ b/drivers/crypto/uadk/version.map
@@ -0,0 +1,3 @@
+DPDK_22 {
+ local: *;
+};
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [EXT] [PATCH resend v5 1/6] crypto/uadk: introduce uadk crypto driver
2022-10-24 13:44 ` [PATCH resend v5 1/6] " Zhangfei Gao
@ 2022-10-25 14:08 ` Akhil Goyal
0 siblings, 0 replies; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:08 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
> new file mode 100644
> index 0000000000..1dfaab73c8
> --- /dev/null
> +++ b/doc/guides/cryptodevs/uadk.rst
> @@ -0,0 +1,73 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> + Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
> + Copyright 2022-2023 Linaro ltd.
> +
> +UADK Crypto Poll Mode Driver
> +=======================================================
The number of '=' are more than the above heading.
> +
> +UADK crypto PMD provides poll mode driver
> +All cryptographic operations are using UADK crypto API.
> +Hardware accelerators using UADK are supposed to be supported.
The above description does not make sense.
Please rewrite and add more information if possible.
> +
> +
> +Features
> +--------
> +
> +UADK crypto PMD has support for:
> +
> +
> +Test steps
> +----------
> +
> + .. code-block:: console
> +
> + 1. Build UADK
> + $ git clone https://github.com/Linaro/uadk
> + $ cd uadk
> + $ mkdir build
> + $ ./autogen.sh
> + $ ./configure --prefix=$PWD/build
> + $ make
> + $ make install
> +
> + * Without --prefix, UADK will be installed to /usr/local/lib by default
> + * If get error:"cannot find -lnuma", please install the libnuma-dev
> +
> + 2. Run pkg-config libwd to ensure env is setup correctly
> + $ export PKG_CONFIG_PATH=$PWD/build/lib/pkgconfig
> + $ pkg-config libwd --cflags --libs
> + -I/usr/local/include -L/usr/local/lib -lwd
> +
> + * export PKG_CONFIG_PATH is required on demand,
> + not needed if UADK is installed to /usr/local/lib
> +
> + 3. Build DPDK
> + $ cd dpdk
> + $ mkdir build
> + $ meson build (--reconfigure)
> + $ cd build
> + $ ninja
> + $ sudo ninja install
> +
> + 4. Prepare hugepage for dpdk
> + $ echo 1024 >
> /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
> + $ echo 1024 >
> /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
> + $ echo 1024 >
> /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages
> + $ echo 1024 >
> /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages
> + $ mkdir -p /mnt/huge_2mb
> + $ mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
> +
> + 5. Run test app
> +
> +Dependency
> +----------
> +
> +UADK crypto PMD relies on UADK library [1]
> +
> +UADK is a framework for user applications to access hardware accelerators.
> +UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> +the same page table between IOMMU and MMU.
> +As a result, user application can directly use virtual address for device dma,
> +which enhances the performance as well as easy usability.
s/dma/DMA
> diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c
> b/drivers/crypto/uadk/uadk_crypto_pmd.c
> new file mode 100644
> index 0000000000..2ae2b33bd7
> --- /dev/null
> +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
> @@ -0,0 +1,121 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved.
> + * Copyright 2022-2023 Linaro ltd.
> + */
> +
> +#include <bus_vdev_driver.h>
> +#include <cryptodev_pmd.h>
> +#include <rte_bus_vdev.h>
> +#include <stdlib.h>
> +#include <uadk/wd_cipher.h>
> +#include <uadk/wd_digest.h>
> +#include <uadk/wd_sched.h>
Separate out different type of headers with a blank line.
#include <stdlib.h>
#include <rte_bus_vdev.h>
#include <bus_vdev_driver.h>
#include <cryptodev_pmd.h>
#include <uadk/wd_cipher.h>
#include <uadk/wd_digest.h>
#include <uadk/wd_sched.h>
> +
> +enum uadk_crypto_version {
> + UADK_CRYPTO_V2,
> + UADK_CRYPTO_V3,
> +};
> +
> +struct uadk_crypto_priv {
> + enum uadk_crypto_version version;
> +} __rte_cache_aligned;
> +
> +static uint8_t uadk_cryptodev_driver_id;
> +
> +RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
> +
> +#define UADK_LOG(level, fmt, ...) \
> + rte_log(RTE_LOG_ ## level, uadk_crypto_logtype, \
> + "%s() line %u: " fmt "\n", __func__, __LINE__, \
> + ## __VA_ARGS__)
> +
Is it not good to define the above macros and structs in header file?
> +static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
> + .dev_configure = NULL,
> + .dev_start = NULL,
> + .dev_stop = NULL,
> + .dev_close = NULL,
> + .stats_get = NULL,
> + .stats_reset = NULL,
> + .dev_infos_get = NULL,
> + .queue_pair_setup = NULL,
> + .queue_pair_release = NULL,
> + .sym_session_get_size = NULL,
> + .sym_session_configure = NULL,
> + .sym_session_clear = NULL,
> +};
> +
> +static int
> +uadk_cryptodev_probe(struct rte_vdev_device *vdev)
> +{
> + struct rte_cryptodev_pmd_init_params init_params = {
> + .name = "",
> + .private_data_size = sizeof(struct uadk_crypto_priv),
> + .max_nb_queue_pairs =
> +
> RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
> + };
> + enum uadk_crypto_version version = UADK_CRYPTO_V2;
> + struct uadk_crypto_priv *priv;
> + struct rte_cryptodev *dev;
> + struct uacce_dev *udev;
> + const char *name;
> +
> + udev = wd_get_accel_dev("cipher");
> + if (!udev)
> + return -ENODEV;
> +
> + if (!strcmp(udev->api, "hisi_qm_v2"))
> + version = UADK_CRYPTO_V2;
> +
> + free(udev);
> +
> + name = rte_vdev_device_name(vdev);
> + if (name == NULL)
> + return -EINVAL;
> +
> + dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params);
> + if (dev == NULL) {
> + UADK_LOG(ERR, "driver %s: create failed", init_params.name);
> + return -ENODEV;
> + }
> +
> + dev->dev_ops = &uadk_crypto_pmd_ops;
> + dev->driver_id = uadk_cryptodev_driver_id;
> + dev->dequeue_burst = NULL;
> + dev->enqueue_burst = NULL;
> + dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
> + priv = dev->data->dev_private;
> + priv->version = version;
> +
> + rte_cryptodev_pmd_probing_finish(dev);
> +
> + return 0;
> +}
> +
> +static int
> +uadk_cryptodev_remove(struct rte_vdev_device *vdev)
> +{
> + struct rte_cryptodev *cryptodev;
> + const char *name;
> +
> + name = rte_vdev_device_name(vdev);
> + if (name == NULL)
> + return -EINVAL;
> +
> + cryptodev = rte_cryptodev_pmd_get_named_dev(name);
> + if (cryptodev == NULL)
> + return -ENODEV;
> +
> + return rte_cryptodev_pmd_destroy(cryptodev);
> +}
> +
> +static struct rte_vdev_driver uadk_crypto_pmd = {
> + .probe = uadk_cryptodev_probe,
> + .remove = uadk_cryptodev_remove,
> +};
> +
> +static struct cryptodev_driver uadk_crypto_drv;
> +
> +#define UADK_CRYPTO_DRIVER_NAME crypto_uadk
> +RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME,
> uadk_crypto_pmd);
> +RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv,
> uadk_crypto_pmd.driver,
> + uadk_cryptodev_driver_id);
> diff --git a/drivers/crypto/uadk/version.map b/drivers/crypto/uadk/version.map
> new file mode 100644
> index 0000000000..c2e0723b4c
> --- /dev/null
> +++ b/drivers/crypto/uadk/version.map
> @@ -0,0 +1,3 @@
> +DPDK_22 {
> + local: *;
> +};
This should be DPDK_23
> --
> 2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH resend v5 2/6] crypto/uadk: support basic operations
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
2022-10-24 13:44 ` [PATCH resend v5 1/6] " Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-25 14:18 ` [EXT] " Akhil Goyal
2022-10-24 13:44 ` [PATCH resend v5 3/6] crypto/uadk: support enqueue/dequeue operations Zhangfei Gao
` (4 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
Support the basic dev control operations: configure, close, start,
stop and get info, as well as queue pairs operations.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/crypto/uadk/uadk_crypto_pmd.c | 213 ++++++++++++++++++++++++--
1 file changed, 204 insertions(+), 9 deletions(-)
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 2ae2b33bd7..7116899ca5 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -11,6 +11,25 @@
#include <uadk/wd_digest.h>
#include <uadk/wd_sched.h>
+/* Maximum length for digest (SHA-512 needs 64 bytes) */
+#define DIGEST_LENGTH_MAX 64
+
+struct uadk_qp {
+ /* Ring for placing process packets */
+ struct rte_ring *processed_pkts;
+ /* Queue pair statistics */
+ struct rte_cryptodev_stats qp_stats;
+ /* Queue Pair Identifier */
+ uint16_t id;
+ /* Unique Queue Pair Name */
+ char name[RTE_CRYPTODEV_NAME_MAX_LEN];
+ /* Buffer used to store the digest generated
+ * by the driver when verifying a digest provided
+ * by the user (using authentication verify operation)
+ */
+ uint8_t temp_digest[DIGEST_LENGTH_MAX];
+} __rte_cache_aligned;
+
enum uadk_crypto_version {
UADK_CRYPTO_V2,
UADK_CRYPTO_V3,
@@ -29,16 +48,192 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
"%s() line %u: " fmt "\n", __func__, __LINE__, \
## __VA_ARGS__)
+static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ /* End of capabilities */
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+/* Configure device */
+static int
+uadk_crypto_pmd_config(struct rte_cryptodev *dev __rte_unused,
+ struct rte_cryptodev_config *config __rte_unused)
+{
+ return 0;
+}
+
+/* Start device */
+static int
+uadk_crypto_pmd_start(struct rte_cryptodev *dev __rte_unused)
+{
+ return 0;
+}
+
+/* Stop device */
+static void
+uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused)
+{
+}
+
+/* Close device */
+static int
+uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused)
+{
+ return 0;
+}
+
+/* Get device statistics */
+static void
+uadk_crypto_pmd_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ stats->enqueued_count += qp->qp_stats.enqueued_count;
+ stats->dequeued_count += qp->qp_stats.dequeued_count;
+ stats->enqueue_err_count += qp->qp_stats.enqueue_err_count;
+ stats->dequeue_err_count += qp->qp_stats.dequeue_err_count;
+ }
+}
+
+/* Reset device statistics */
+static void
+uadk_crypto_pmd_stats_reset(struct rte_cryptodev *dev __rte_unused)
+{
+ int qp_id;
+
+ for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+ }
+}
+
+/* Get device info */
+static void
+uadk_crypto_pmd_info_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *dev_info)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+
+ if (dev_info != NULL) {
+ dev_info->driver_id = dev->driver_id;
+ dev_info->driver_name = dev->device->driver->name;
+ dev_info->max_nb_queue_pairs = 128;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
+ dev_info->feature_flags = dev->feature_flags;
+
+ if (priv->version == UADK_CRYPTO_V2)
+ dev_info->capabilities = uadk_crypto_v2_capabilities;
+ }
+}
+
+/* Release queue pair */
+static int
+uadk_crypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+ struct uadk_qp *qp = dev->data->queue_pairs[qp_id];
+
+ if (qp) {
+ rte_ring_free(qp->processed_pkts);
+ rte_free(qp);
+ dev->data->queue_pairs[qp_id] = NULL;
+ }
+
+ return 0;
+}
+
+/* set a unique name for the queue pair based on its name, dev_id and qp_id */
+static int
+uadk_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+ struct uadk_qp *qp)
+{
+ unsigned int n = snprintf(qp->name, sizeof(qp->name),
+ "uadk_crypto_pmd_%u_qp_%u",
+ dev->data->dev_id, qp->id);
+
+ if (n >= sizeof(qp->name))
+ return -EINVAL;
+
+ return 0;
+}
+
+/* Create a ring to place process packets on */
+static struct rte_ring *
+uadk_pmd_qp_create_processed_pkts_ring(struct uadk_qp *qp,
+ unsigned int ring_size, int socket_id)
+{
+ struct rte_ring *r = qp->processed_pkts;
+
+ if (r) {
+ if (rte_ring_get_size(r) >= ring_size) {
+ UADK_LOG(INFO, "Reusing existing ring %s for processed packets",
+ qp->name);
+ return r;
+ }
+
+ UADK_LOG(ERR, "Unable to reuse existing ring %s for processed packets",
+ qp->name);
+ return NULL;
+ }
+
+ return rte_ring_create(qp->name, ring_size, socket_id,
+ RING_F_EXACT_SZ);
+}
+
+static int
+uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ const struct rte_cryptodev_qp_conf *qp_conf,
+ int socket_id)
+{
+ struct uadk_qp *qp;
+
+ /* Free memory prior to re-allocation if needed. */
+ if (dev->data->queue_pairs[qp_id] != NULL)
+ uadk_crypto_pmd_qp_release(dev, qp_id);
+
+ /* Allocate the queue pair data structure. */
+ qp = rte_zmalloc_socket("uadk PMD Queue Pair", sizeof(*qp),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (qp == NULL)
+ return (-ENOMEM);
+
+ qp->id = qp_id;
+ dev->data->queue_pairs[qp_id] = qp;
+
+ if (uadk_pmd_qp_set_unique_name(dev, qp))
+ goto qp_setup_cleanup;
+
+ qp->processed_pkts = uadk_pmd_qp_create_processed_pkts_ring(qp,
+ qp_conf->nb_descriptors, socket_id);
+ if (qp->processed_pkts == NULL)
+ goto qp_setup_cleanup;
+
+ memset(&qp->qp_stats, 0, sizeof(qp->qp_stats));
+
+ return 0;
+
+qp_setup_cleanup:
+ if (qp) {
+ rte_free(qp);
+ qp = NULL;
+ }
+ return -EINVAL;
+}
+
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
- .dev_configure = NULL,
- .dev_start = NULL,
- .dev_stop = NULL,
- .dev_close = NULL,
- .stats_get = NULL,
- .stats_reset = NULL,
- .dev_infos_get = NULL,
- .queue_pair_setup = NULL,
- .queue_pair_release = NULL,
+ .dev_configure = uadk_crypto_pmd_config,
+ .dev_start = uadk_crypto_pmd_start,
+ .dev_stop = uadk_crypto_pmd_stop,
+ .dev_close = uadk_crypto_pmd_close,
+ .stats_get = uadk_crypto_pmd_stats_get,
+ .stats_reset = uadk_crypto_pmd_stats_reset,
+ .dev_infos_get = uadk_crypto_pmd_info_get,
+ .queue_pair_setup = uadk_crypto_pmd_qp_setup,
+ .queue_pair_release = uadk_crypto_pmd_qp_release,
.sym_session_get_size = NULL,
.sym_session_configure = NULL,
.sym_session_clear = NULL,
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [EXT] [PATCH resend v5 2/6] crypto/uadk: support basic operations
2022-10-24 13:44 ` [PATCH resend v5 2/6] crypto/uadk: support basic operations Zhangfei Gao
@ 2022-10-25 14:18 ` Akhil Goyal
0 siblings, 0 replies; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:18 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> +/* Maximum length for digest (SHA-512 needs 64 bytes) */
> +#define DIGEST_LENGTH_MAX 64
> +
> +struct uadk_qp {
> + /* Ring for placing process packets */
> + struct rte_ring *processed_pkts;
> + /* Queue pair statistics */
> + struct rte_cryptodev_stats qp_stats;
> + /* Queue Pair Identifier */
> + uint16_t id;
> + /* Unique Queue Pair Name */
> + char name[RTE_CRYPTODEV_NAME_MAX_LEN];
> + /* Buffer used to store the digest generated
> + * by the driver when verifying a digest provided
> + * by the user (using authentication verify operation)
> + */
> + uint8_t temp_digest[DIGEST_LENGTH_MAX];
> +} __rte_cache_aligned;
> +
Same comment as on 1/6.
It is better to move the structure definitions in header file.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH resend v5 3/6] crypto/uadk: support enqueue/dequeue operations
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
2022-10-24 13:44 ` [PATCH resend v5 1/6] " Zhangfei Gao
2022-10-24 13:44 ` [PATCH resend v5 2/6] crypto/uadk: support basic operations Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-24 13:44 ` [PATCH resend v5 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
` (3 subsequent siblings)
6 siblings, 0 replies; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
This commit adds the enqueue and dequeue operations.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/crypto/uadk/uadk_crypto_pmd.c | 53 ++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 7116899ca5..84cb1dab25 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -239,6 +239,55 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.sym_session_clear = NULL,
};
+static uint16_t
+uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct uadk_qp *qp = queue_pair;
+ struct rte_crypto_op *op;
+ uint16_t enqd = 0;
+ int i, ret;
+
+ for (i = 0; i < nb_ops; i++) {
+ op = ops[i];
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+ if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) {
+ ret = rte_ring_enqueue(qp->processed_pkts, (void *)op);
+ if (ret < 0)
+ goto enqueue_err;
+ qp->qp_stats.enqueued_count++;
+ enqd++;
+ } else {
+ /* increment count if failed to enqueue op */
+ qp->qp_stats.enqueue_err_count++;
+ }
+ }
+
+ return enqd;
+
+enqueue_err:
+ qp->qp_stats.enqueue_err_count++;
+ return enqd;
+}
+
+static uint16_t
+uadk_crypto_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ struct uadk_qp *qp = queue_pair;
+ unsigned int nb_dequeued;
+
+ nb_dequeued = rte_ring_dequeue_burst(qp->processed_pkts,
+ (void **)ops, nb_ops, NULL);
+ qp->qp_stats.dequeued_count += nb_dequeued;
+
+ return nb_dequeued;
+}
+
static int
uadk_cryptodev_probe(struct rte_vdev_device *vdev)
{
@@ -275,8 +324,8 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
dev->dev_ops = &uadk_crypto_pmd_ops;
dev->driver_id = uadk_cryptodev_driver_id;
- dev->dequeue_burst = NULL;
- dev->enqueue_burst = NULL;
+ dev->dequeue_burst = uadk_crypto_dequeue_burst;
+ dev->enqueue_burst = uadk_crypto_enqueue_burst;
dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
priv = dev->data->dev_private;
priv->version = version;
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH resend v5 4/6] crypto/uadk: support cipher algorithms
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (2 preceding siblings ...)
2022-10-24 13:44 ` [PATCH resend v5 3/6] crypto/uadk: support enqueue/dequeue operations Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-25 14:28 ` [EXT] " Akhil Goyal
2022-10-24 13:44 ` [PATCH resend v5 5/6] crypto/uadk: support auth algorithms Zhangfei Gao
` (2 subsequent siblings)
6 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES_ECB``
* ``RTE_CRYPTO_CIPHER_AES_CBC``
* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_DES_CBC``
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/features/uadk.ini | 10 +
doc/guides/cryptodevs/uadk.rst | 6 +
drivers/crypto/uadk/uadk_crypto_pmd.c | 327 +++++++++++++++++++++++-
3 files changed, 338 insertions(+), 5 deletions(-)
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
index df5ad40e3d..005e08ac8d 100644
--- a/doc/guides/cryptodevs/features/uadk.ini
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -4,12 +4,22 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Symmetric crypto = Y
HW Accelerated = Y
;
; Supported crypto algorithms of the 'uadk' crypto driver.
;
[Cipher]
+AES CBC (128) = Y
+AES CBC (192) = Y
+AES CBC (256) = Y
+AES ECB (128) = Y
+AES ECB (192) = Y
+AES ECB (256) = Y
+AES XTS (128) = Y
+AES XTS (256) = Y
+DES CBC = Y
;
; Supported authentication algorithms of the 'uadk' crypto driver.
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 1dfaab73c8..7b5c1af144 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -15,6 +15,12 @@ Features
UADK crypto PMD has support for:
+Cipher algorithms:
+
+* ``RTE_CRYPTO_CIPHER_AES_ECB``
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_XTS``
+* ``RTE_CRYPTO_CIPHER_DES_CBC``
Test steps
----------
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index 84cb1dab25..f9699e6b7e 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -30,12 +30,35 @@ struct uadk_qp {
uint8_t temp_digest[DIGEST_LENGTH_MAX];
} __rte_cache_aligned;
+enum uadk_chain_order {
+ UADK_CHAIN_ONLY_CIPHER,
+ UADK_CHAIN_NOT_SUPPORTED
+};
+
+struct uadk_crypto_session {
+ handle_t handle_cipher;
+ enum uadk_chain_order chain_order;
+
+ /* IV parameters */
+ struct {
+ uint16_t length;
+ uint16_t offset;
+ } iv;
+
+ /* Cipher Parameters */
+ struct {
+ enum rte_crypto_cipher_operation direction;
+ struct wd_cipher_req req;
+ } cipher;
+} __rte_cache_aligned;
+
enum uadk_crypto_version {
UADK_CRYPTO_V2,
UADK_CRYPTO_V3,
};
struct uadk_crypto_priv {
+ bool env_cipher_init;
enum uadk_crypto_version version;
} __rte_cache_aligned;
@@ -49,6 +72,86 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
## __VA_ARGS__)
static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ { /* AES ECB */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_ECB,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* AES XTS */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .block_size = 1,
+ .key_size = {
+ .min = 32,
+ .max = 64,
+ .increment = 32
+ },
+ .iv_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
/* End of capabilities */
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
@@ -76,8 +179,15 @@ uadk_crypto_pmd_stop(struct rte_cryptodev *dev __rte_unused)
/* Close device */
static int
-uadk_crypto_pmd_close(struct rte_cryptodev *dev __rte_unused)
+uadk_crypto_pmd_close(struct rte_cryptodev *dev)
{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+
+ if (priv->env_cipher_init) {
+ wd_cipher_env_uninit();
+ priv->env_cipher_init = false;
+ }
+
return 0;
}
@@ -224,6 +334,159 @@ uadk_crypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
return -EINVAL;
}
+static unsigned int
+uadk_crypto_sym_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+ return sizeof(struct uadk_crypto_session);
+}
+
+static enum uadk_chain_order
+uadk_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+ enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;
+
+ if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ if (xform->next == NULL)
+ res = UADK_CHAIN_ONLY_CIPHER;
+ }
+ }
+
+ return res;
+}
+
+static int
+uadk_set_session_cipher_parameters(struct rte_cryptodev *dev,
+ struct uadk_crypto_session *sess,
+ struct rte_crypto_sym_xform *xform)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+ struct rte_crypto_cipher_xform *cipher = &xform->cipher;
+ struct wd_cipher_sess_setup setup = {0};
+ struct sched_params params = {0};
+ int ret;
+
+ if (!priv->env_cipher_init) {
+ ret = wd_cipher_env_init(NULL);
+ if (ret < 0)
+ return -EINVAL;
+ priv->env_cipher_init = true;
+ }
+
+ sess->cipher.direction = cipher->op;
+ sess->iv.offset = cipher->iv.offset;
+ sess->iv.length = cipher->iv.length;
+
+ switch (cipher->algo) {
+ /* Cover supported cipher algorithms */
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_CTR;
+ sess->cipher.req.out_bytes = 64;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_ECB:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_ECB;
+ sess->cipher.req.out_bytes = 16;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_CBC;
+ if (cipher->key.length == 16)
+ sess->cipher.req.out_bytes = 16;
+ else
+ sess->cipher.req.out_bytes = 64;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_XTS:
+ setup.alg = WD_CIPHER_AES;
+ setup.mode = WD_CIPHER_XTS;
+ if (cipher->key.length == 16)
+ sess->cipher.req.out_bytes = 32;
+ else
+ sess->cipher.req.out_bytes = 512;
+ break;
+ default:
+ ret = -ENOTSUP;
+ goto env_uninit;
+ }
+
+ params.numa_id = -1; /* choose nearby numa node */
+ setup.sched_param = ¶ms;
+ sess->handle_cipher = wd_cipher_alloc_sess(&setup);
+ if (!sess->handle_cipher) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ ret = wd_cipher_set_key(sess->handle_cipher, cipher->key.data, cipher->key.length);
+ if (ret) {
+ wd_cipher_free_sess(sess->handle_cipher);
+ UADK_LOG(ERR, "uadk failed to set key!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ return 0;
+
+env_uninit:
+ wd_cipher_env_uninit();
+ priv->env_cipher_init = false;
+ return ret;
+}
+
+static int
+uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ struct rte_cryptodev_sym_session *session)
+{
+ struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
+ int ret;
+
+ if (unlikely(!sess)) {
+ UADK_LOG(ERR, "Session not available");
+ return -EINVAL;
+ }
+
+ sess->chain_order = uadk_get_chain_order(xform);
+ switch (sess->chain_order) {
+ case UADK_CHAIN_ONLY_CIPHER:
+ cipher_xform = xform;
+ break;
+ default:
+ return -ENOTSUP;
+ }
+
+ if (cipher_xform) {
+ ret = uadk_set_session_cipher_parameters(dev, sess, cipher_xform);
+ if (ret != 0) {
+ UADK_LOG(ERR,
+ "Invalid/unsupported cipher parameters");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void
+uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused,
+ struct rte_cryptodev_sym_session *session)
+{
+ struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
+
+ if (unlikely(sess == NULL)) {
+ UADK_LOG(ERR, "Session not available");
+ return;
+ }
+
+ if (sess->handle_cipher) {
+ wd_cipher_free_sess(sess->handle_cipher);
+ sess->handle_cipher = 0;
+ }
+}
+
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.dev_configure = uadk_crypto_pmd_config,
.dev_start = uadk_crypto_pmd_start,
@@ -234,16 +497,51 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
.dev_infos_get = uadk_crypto_pmd_info_get,
.queue_pair_setup = uadk_crypto_pmd_qp_setup,
.queue_pair_release = uadk_crypto_pmd_qp_release,
- .sym_session_get_size = NULL,
- .sym_session_configure = NULL,
- .sym_session_clear = NULL,
+ .sym_session_get_size = uadk_crypto_sym_session_get_size,
+ .sym_session_configure = uadk_crypto_sym_session_configure,
+ .sym_session_clear = uadk_crypto_sym_session_clear,
};
+static void
+uadk_process_cipher_op(struct rte_crypto_op *op,
+ struct uadk_crypto_session *sess,
+ struct rte_mbuf *msrc, struct rte_mbuf *mdst)
+{
+ uint32_t off = op->sym->cipher.data.offset;
+ int ret;
+
+ if (!sess) {
+ op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+
+ sess->cipher.req.src = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off);
+ sess->cipher.req.in_bytes = op->sym->cipher.data.length;
+ sess->cipher.req.dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *, off);
+ sess->cipher.req.out_buf_bytes = sess->cipher.req.in_bytes;
+ sess->cipher.req.iv_bytes = sess->iv.length;
+ sess->cipher.req.iv = rte_crypto_op_ctod_offset(op, uint8_t *,
+ sess->iv.offset);
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+ sess->cipher.req.op_type = WD_CIPHER_ENCRYPTION;
+ else
+ sess->cipher.req.op_type = WD_CIPHER_DECRYPTION;
+
+ do {
+ ret = wd_do_cipher_sync(sess->handle_cipher, &sess->cipher.req);
+ } while (ret == -WD_EBUSY);
+
+ if (ret)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
static uint16_t
uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
{
struct uadk_qp *qp = queue_pair;
+ struct uadk_crypto_session *sess = NULL;
+ struct rte_mbuf *msrc, *mdst;
struct rte_crypto_op *op;
uint16_t enqd = 0;
int i, ret;
@@ -251,6 +549,23 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
for (i = 0; i < nb_ops; i++) {
op = ops[i];
op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+ msrc = op->sym->m_src;
+ mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+ if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) {
+ if (likely(op->sym->session != NULL))
+ sess = CRYPTODEV_GET_SYM_SESS_PRIV(
+ op->sym->session);
+ }
+
+ switch (sess->chain_order) {
+ case UADK_CHAIN_ONLY_CIPHER:
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
@@ -326,7 +641,9 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
dev->driver_id = uadk_cryptodev_driver_id;
dev->dequeue_burst = uadk_crypto_dequeue_burst;
dev->enqueue_burst = uadk_crypto_enqueue_burst;
- dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
+ dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED |
+ RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_SYM_SESSIONLESS;
priv = dev->data->dev_private;
priv->version = version;
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [EXT] [PATCH resend v5 4/6] crypto/uadk: support cipher algorithms
2022-10-24 13:44 ` [PATCH resend v5 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
@ 2022-10-25 14:28 ` Akhil Goyal
0 siblings, 0 replies; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:28 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> @@ -326,7 +641,9 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev)
> dev->driver_id = uadk_cryptodev_driver_id;
> dev->dequeue_burst = uadk_crypto_dequeue_burst;
> dev->enqueue_burst = uadk_crypto_enqueue_burst;
> - dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED;
> + dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED |
> + RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
> + RTE_CRYPTODEV_FF_SYM_SESSIONLESS;
It seems the driver is not supporting session-less operations,
but here you have added it.
Please remove this until it is supported.
And once it is supported, update uadk.ini file as well.
> priv = dev->data->dev_private;
> priv->version = version;
>
> --
> 2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH resend v5 5/6] crypto/uadk: support auth algorithms
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (3 preceding siblings ...)
2022-10-24 13:44 ` [PATCH resend v5 4/6] crypto/uadk: support cipher algorithms Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-25 14:38 ` [EXT] " Akhil Goyal
2022-10-24 13:44 ` [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
2022-10-25 14:59 ` [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
6 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
Hash algorithms:
* ``RTE_CRYPTO_AUTH_MD5``
* ``RTE_CRYPTO_AUTH_MD5_HMAC``
* ``RTE_CRYPTO_AUTH_SHA1``
* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
* ``RTE_CRYPTO_AUTH_SHA224``
* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
* ``RTE_CRYPTO_AUTH_SHA256``
* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
* ``RTE_CRYPTO_AUTH_SHA384``
* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
* ``RTE_CRYPTO_AUTH_SHA512``
* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
doc/guides/cryptodevs/features/uadk.ini | 12 +
doc/guides/cryptodevs/uadk.rst | 15 +
drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++
3 files changed, 486 insertions(+)
diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini
index 005e08ac8d..2e8a37a2b3 100644
--- a/doc/guides/cryptodevs/features/uadk.ini
+++ b/doc/guides/cryptodevs/features/uadk.ini
@@ -25,6 +25,18 @@ DES CBC = Y
; Supported authentication algorithms of the 'uadk' crypto driver.
;
[Auth]
+MD5 = Y
+MD5 HMAC = Y
+SHA1 = Y
+SHA1 HMAC = Y
+SHA224 = Y
+SHA224 HMAC = Y
+SHA256 = Y
+SHA256 HMAC = Y
+SHA384 = Y
+SHA384 HMAC = Y
+SHA512 = Y
+SHA512 HMAC = Y
;
; Supported AEAD algorithms of the 'uadk' crypto driver.
diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst
index 7b5c1af144..cae23c6b91 100644
--- a/doc/guides/cryptodevs/uadk.rst
+++ b/doc/guides/cryptodevs/uadk.rst
@@ -22,6 +22,21 @@ Cipher algorithms:
* ``RTE_CRYPTO_CIPHER_AES_XTS``
* ``RTE_CRYPTO_CIPHER_DES_CBC``
+Hash algorithms:
+
+* ``RTE_CRYPTO_AUTH_MD5``
+* ``RTE_CRYPTO_AUTH_MD5_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA1``
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA224``
+* ``RTE_CRYPTO_AUTH_SHA224_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA256``
+* ``RTE_CRYPTO_AUTH_SHA256_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA384``
+* ``RTE_CRYPTO_AUTH_SHA384_HMAC``
+* ``RTE_CRYPTO_AUTH_SHA512``
+* ``RTE_CRYPTO_AUTH_SHA512_HMAC``
+
Test steps
----------
diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c
index f9699e6b7e..58ae5ca32a 100644
--- a/drivers/crypto/uadk/uadk_crypto_pmd.c
+++ b/drivers/crypto/uadk/uadk_crypto_pmd.c
@@ -32,11 +32,15 @@ struct uadk_qp {
enum uadk_chain_order {
UADK_CHAIN_ONLY_CIPHER,
+ UADK_CHAIN_ONLY_AUTH,
+ UADK_CHAIN_CIPHER_AUTH,
+ UADK_CHAIN_AUTH_CIPHER,
UADK_CHAIN_NOT_SUPPORTED
};
struct uadk_crypto_session {
handle_t handle_cipher;
+ handle_t handle_digest;
enum uadk_chain_order chain_order;
/* IV parameters */
@@ -50,6 +54,13 @@ struct uadk_crypto_session {
enum rte_crypto_cipher_operation direction;
struct wd_cipher_req req;
} cipher;
+
+ /* Authentication Parameters */
+ struct {
+ struct wd_digest_req req;
+ enum rte_crypto_auth_operation operation;
+ uint16_t digest_length;
+ } auth;
} __rte_cache_aligned;
enum uadk_crypto_version {
@@ -59,6 +70,7 @@ enum uadk_crypto_version {
struct uadk_crypto_priv {
bool env_cipher_init;
+ bool env_auth_init;
enum uadk_crypto_version version;
} __rte_cache_aligned;
@@ -72,6 +84,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO);
## __VA_ARGS__)
static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* MD5 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384,
+ .block_size = 64,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512,
+ .block_size = 128,
+ .key_size = {
+ .min = 0,
+ .max = 0,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ }, }
+ }, }
+ },
{ /* AES ECB */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
@@ -188,6 +446,11 @@ uadk_crypto_pmd_close(struct rte_cryptodev *dev)
priv->env_cipher_init = false;
}
+ if (priv->env_auth_init) {
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ }
+
return 0;
}
@@ -346,9 +609,19 @@ uadk_get_chain_order(const struct rte_crypto_sym_xform *xform)
enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED;
if (xform != NULL) {
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ if (xform->next == NULL)
+ res = UADK_CHAIN_ONLY_AUTH;
+ else if (xform->next->type ==
+ RTE_CRYPTO_SYM_XFORM_CIPHER)
+ res = UADK_CHAIN_AUTH_CIPHER;
+ }
+
if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
if (xform->next == NULL)
res = UADK_CHAIN_ONLY_CIPHER;
+ else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+ res = UADK_CHAIN_CIPHER_AUTH;
}
}
@@ -435,12 +708,119 @@ uadk_set_session_cipher_parameters(struct rte_cryptodev *dev,
return ret;
}
+/* Set session auth parameters */
+static int
+uadk_set_session_auth_parameters(struct rte_cryptodev *dev,
+ struct uadk_crypto_session *sess,
+ struct rte_crypto_sym_xform *xform)
+{
+ struct uadk_crypto_priv *priv = dev->data->dev_private;
+ struct wd_digest_sess_setup setup = {0};
+ struct sched_params params = {0};
+ int ret;
+
+ if (!priv->env_auth_init) {
+ ret = wd_digest_env_init(NULL);
+ if (ret < 0)
+ return -EINVAL;
+ priv->env_auth_init = true;
+ }
+
+ sess->auth.operation = xform->auth.op;
+ sess->auth.digest_length = xform->auth.digest_length;
+
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_MD5) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_MD5;
+ sess->auth.req.out_buf_bytes = 16;
+ sess->auth.req.out_bytes = 16;
+ break;
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA1) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA1;
+ sess->auth.req.out_buf_bytes = 20;
+ sess->auth.req.out_bytes = 20;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA224) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA224;
+ sess->auth.req.out_buf_bytes = 28;
+ sess->auth.req.out_bytes = 28;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA256) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA256;
+ sess->auth.req.out_buf_bytes = 32;
+ sess->auth.req.out_bytes = 32;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA384) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA384;
+ sess->auth.req.out_buf_bytes = 48;
+ sess->auth.req.out_bytes = 48;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA512) ?
+ WD_DIGEST_NORMAL : WD_DIGEST_HMAC;
+ setup.alg = WD_DIGEST_SHA512;
+ sess->auth.req.out_buf_bytes = 64;
+ sess->auth.req.out_bytes = 64;
+ break;
+ default:
+ ret = -ENOTSUP;
+ goto env_uninit;
+ }
+
+ params.numa_id = -1; /* choose nearby numa node */
+ setup.sched_param = ¶ms;
+ sess->handle_digest = wd_digest_alloc_sess(&setup);
+ if (!sess->handle_digest) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+
+ /* if mode is HMAC, should set key */
+ if (setup.mode == WD_DIGEST_HMAC) {
+ ret = wd_digest_set_key(sess->handle_digest,
+ xform->auth.key.data,
+ xform->auth.key.length);
+ if (ret) {
+ UADK_LOG(ERR, "uadk failed to alloc session!\n");
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ ret = -EINVAL;
+ goto env_uninit;
+ }
+ }
+
+ return 0;
+
+env_uninit:
+ wd_digest_env_uninit();
+ priv->env_auth_init = false;
+ return ret;
+}
+
static int
uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
struct rte_crypto_sym_xform *xform,
struct rte_cryptodev_sym_session *session)
{
struct rte_crypto_sym_xform *cipher_xform = NULL;
+ struct rte_crypto_sym_xform *auth_xform = NULL;
struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session);
int ret;
@@ -454,6 +834,17 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
case UADK_CHAIN_ONLY_CIPHER:
cipher_xform = xform;
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ auth_xform = xform;
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ cipher_xform = xform;
+ auth_xform = xform->next;
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ auth_xform = xform;
+ cipher_xform = xform->next;
+ break;
default:
return -ENOTSUP;
}
@@ -467,6 +858,15 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev,
}
}
+ if (auth_xform) {
+ ret = uadk_set_session_auth_parameters(dev, sess, auth_xform);
+ if (ret != 0) {
+ UADK_LOG(ERR,
+ "Invalid/unsupported auth parameters");
+ return ret;
+ }
+ }
+
return 0;
}
@@ -485,6 +885,11 @@ uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused,
wd_cipher_free_sess(sess->handle_cipher);
sess->handle_cipher = 0;
}
+
+ if (sess->handle_digest) {
+ wd_digest_free_sess(sess->handle_digest);
+ sess->handle_digest = 0;
+ }
}
static struct rte_cryptodev_ops uadk_crypto_pmd_ops = {
@@ -535,6 +940,49 @@ uadk_process_cipher_op(struct rte_crypto_op *op,
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
}
+static void
+uadk_process_auth_op(struct uadk_qp *qp, struct rte_crypto_op *op,
+ struct uadk_crypto_session *sess,
+ struct rte_mbuf *msrc, struct rte_mbuf *mdst)
+{
+ uint32_t srclen = op->sym->auth.data.length;
+ uint32_t off = op->sym->auth.data.offset;
+ uint8_t *dst = qp->temp_digest;
+ int ret;
+
+ if (!sess) {
+ op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
+ return;
+ }
+
+ sess->auth.req.in = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off);
+ sess->auth.req.in_bytes = srclen;
+ sess->auth.req.out = dst;
+
+ do {
+ ret = wd_do_digest_sync(sess->handle_digest, &sess->auth.req);
+ } while (ret == -WD_EBUSY);
+
+ if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+ if (memcmp(dst, op->sym->auth.digest.data,
+ sess->auth.digest_length) != 0) {
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ }
+ } else {
+ uint8_t *auth_dst;
+
+ auth_dst = op->sym->auth.digest.data;
+ if (auth_dst == NULL)
+ auth_dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *,
+ op->sym->auth.data.offset +
+ op->sym->auth.data.length);
+ memcpy(auth_dst, dst, sess->auth.digest_length);
+ }
+
+ if (ret)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
static uint16_t
uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
@@ -562,6 +1010,17 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
case UADK_CHAIN_ONLY_CIPHER:
uadk_process_cipher_op(op, sess, msrc, mdst);
break;
+ case UADK_CHAIN_ONLY_AUTH:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ break;
+ case UADK_CHAIN_CIPHER_AUTH:
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ uadk_process_auth_op(qp, op, sess, mdst, mdst);
+ break;
+ case UADK_CHAIN_AUTH_CIPHER:
+ uadk_process_auth_op(qp, op, sess, msrc, mdst);
+ uadk_process_cipher_op(op, sess, msrc, mdst);
+ break;
default:
op->status = RTE_CRYPTO_OP_STATUS_ERROR;
break;
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [EXT] [PATCH resend v5 5/6] crypto/uadk: support auth algorithms
2022-10-24 13:44 ` [PATCH resend v5 5/6] crypto/uadk: support auth algorithms Zhangfei Gao
@ 2022-10-25 14:38 ` Akhil Goyal
2022-10-26 10:02 ` Zhangfei Gao
0 siblings, 1 reply; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:38 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> Hash algorithms:
>
> * ``RTE_CRYPTO_AUTH_MD5``
> * ``RTE_CRYPTO_AUTH_MD5_HMAC``
> * ``RTE_CRYPTO_AUTH_SHA1``
> * ``RTE_CRYPTO_AUTH_SHA1_HMAC``
> * ``RTE_CRYPTO_AUTH_SHA224``
> * ``RTE_CRYPTO_AUTH_SHA224_HMAC``
> * ``RTE_CRYPTO_AUTH_SHA256``
> * ``RTE_CRYPTO_AUTH_SHA256_HMAC``
> * ``RTE_CRYPTO_AUTH_SHA384``
> * ``RTE_CRYPTO_AUTH_SHA384_HMAC``
> * ``RTE_CRYPTO_AUTH_SHA512``
> * ``RTE_CRYPTO_AUTH_SHA512_HMAC``
>
It is better to rewrite the description as
Support added for MD5, SHA1, SHA224, SHA256, SHA384, SHA512
Authentication algorithms with and without HMAC.
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
> doc/guides/cryptodevs/features/uadk.ini | 12 +
> doc/guides/cryptodevs/uadk.rst | 15 +
> drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++
> 3 files changed, 486 insertions(+)
>
<Snip>
> @@ -72,6 +84,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype,
> INFO);
> ## __VA_ARGS__)
>
> static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
> + { /* MD5 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
It seems there is a mistake here.
Auth algos with HMAC do have keys > 0.
I am not sure if your test cases are getting passed with these capabilities.
Same comment for all the HMAC capabilities.
> + .digest_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* MD5 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_MD5,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
> + { /* SHA1 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 20,
> + .max = 20,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* SHA1 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA1,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 20,
> + .max = 20,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
> + { /* SHA224 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 28,
> + .max = 28,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* SHA224 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA224,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 28,
> + .max = 28,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
> + { /* SHA256 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 32,
> + .max = 32,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* SHA256 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA256,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 32,
> + .max = 32,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
> + { /* SHA384 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
> + .block_size = 128,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 48,
> + .max = 48,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* SHA384 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA384,
> + .block_size = 64,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 48,
> + .max = 48,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
> + { /* SHA512 HMAC */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
> + .block_size = 128,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 64,
> + .max = 64,
> + .increment = 0
> + },
> + .iv_size = { 0 }
> + }, }
> + }, }
> + },
> + { /* SHA512 */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_SHA512,
> + .block_size = 128,
> + .key_size = {
> + .min = 0,
> + .max = 0,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 64,
> + .max = 64,
> + .increment = 0
> + },
> + }, }
> + }, }
> + },
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [EXT] [PATCH resend v5 5/6] crypto/uadk: support auth algorithms
2022-10-25 14:38 ` [EXT] " Akhil Goyal
@ 2022-10-26 10:02 ` Zhangfei Gao
0 siblings, 0 replies; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-26 10:02 UTC (permalink / raw)
To: Akhil Goyal, Zhangfei Gao, Declan Doherty, Fan Zhang,
Ashish Gupta, Ray Kinsella, thomas
Cc: dev, acc
On 2022/10/25 下午10:38, Akhil Goyal wrote:
>> Hash algorithms:
>>
>> * ``RTE_CRYPTO_AUTH_MD5``
>> * ``RTE_CRYPTO_AUTH_MD5_HMAC``
>> * ``RTE_CRYPTO_AUTH_SHA1``
>> * ``RTE_CRYPTO_AUTH_SHA1_HMAC``
>> * ``RTE_CRYPTO_AUTH_SHA224``
>> * ``RTE_CRYPTO_AUTH_SHA224_HMAC``
>> * ``RTE_CRYPTO_AUTH_SHA256``
>> * ``RTE_CRYPTO_AUTH_SHA256_HMAC``
>> * ``RTE_CRYPTO_AUTH_SHA384``
>> * ``RTE_CRYPTO_AUTH_SHA384_HMAC``
>> * ``RTE_CRYPTO_AUTH_SHA512``
>> * ``RTE_CRYPTO_AUTH_SHA512_HMAC``
>>
> It is better to rewrite the description as
>
> Support added for MD5, SHA1, SHA224, SHA256, SHA384, SHA512
> Authentication algorithms with and without HMAC.
>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>
>> ---
>> doc/guides/cryptodevs/features/uadk.ini | 12 +
>> doc/guides/cryptodevs/uadk.rst | 15 +
>> drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++
>> 3 files changed, 486 insertions(+)
>>
> <Snip>
>
>> @@ -72,6 +84,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype,
>> INFO);
>> ## __VA_ARGS__)
>>
>> static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = {
>> + { /* MD5 HMAC */
>> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
>> + {.sym = {
>> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
>> + {.auth = {
>> + .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
>> + .block_size = 64,
>> + .key_size = {
>> + .min = 0,
>> + .max = 0,
>> + .increment = 0
>> + },
> It seems there is a mistake here.
> Auth algos with HMAC do have keys > 0.
>
> I am not sure if your test cases are getting passed with these capabilities.
>
> Same comment for all the HMAC capabilities.
After double confirmed, and studied the openssl crypto config.
The hash do not have key, so value is 0
But HMAC need key,
After using openssl crypto value,
the passed case increased from 50 to 72, though no reported fail case in
both case.
Thanks for the reminding.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (4 preceding siblings ...)
2022-10-24 13:44 ` [PATCH resend v5 5/6] crypto/uadk: support auth algorithms Zhangfei Gao
@ 2022-10-24 13:44 ` Zhangfei Gao
2022-10-25 14:54 ` [EXT] " Akhil Goyal
2022-10-25 14:59 ` [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
6 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-24 13:44 UTC (permalink / raw)
To: Akhil Goyal, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc, Zhangfei Gao
Example:
sudo dpdk-test --vdev=crypto_uadk --log-level=6
RTE>>cryptodev_uadk_autotest
RTE>>quit
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
app/test/test_cryptodev.c | 7 +++++++
app/test/test_cryptodev.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index c2b33686ed..183e24f150 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -16467,6 +16467,12 @@ test_cryptodev_qat(void)
return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
}
+static int
+test_cryptodev_uadk(void)
+{
+ return run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_UADK_PMD));
+}
+
static int
test_cryptodev_virtio(void)
{
@@ -16810,6 +16816,7 @@ REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest, test_cryptodev_mrvl);
REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec);
REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
+REGISTER_TEST_COMMAND(cryptodev_uadk_autotest, test_cryptodev_uadk);
REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio);
REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest, test_cryptodev_octeontx);
REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest, test_cryptodev_caam_jr);
diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
index 29a7d4db2b..abd795f54a 100644
--- a/app/test/test_cryptodev.h
+++ b/app/test/test_cryptodev.h
@@ -74,6 +74,7 @@
#define CRYPTODEV_NAME_CN9K_PMD crypto_cn9k
#define CRYPTODEV_NAME_CN10K_PMD crypto_cn10k
#define CRYPTODEV_NAME_MLX5_PMD crypto_mlx5
+#define CRYPTODEV_NAME_UADK_PMD crypto_uadk
enum cryptodev_api_test_type {
--
2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [EXT] [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest
2022-10-24 13:44 ` [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
@ 2022-10-25 14:54 ` Akhil Goyal
2022-10-26 9:57 ` Zhangfei Gao
0 siblings, 1 reply; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:54 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> Subject: [EXT] [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest
Rewrite patch title as
test/crypto: support uadk PMD
>
Add a line
Updated test application to run autotest for uadk crypto PMD.
> Example:
> sudo dpdk-test --vdev=crypto_uadk --log-level=6
> RTE>>cryptodev_uadk_autotest
> RTE>>quit
Add this information in uadk.rst as well.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
> app/test/test_cryptodev.c | 7 +++++++
> app/test/test_cryptodev.h | 1 +
> 2 files changed, 8 insertions(+)
>
> diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> index c2b33686ed..183e24f150 100644
> --- a/app/test/test_cryptodev.c
> +++ b/app/test/test_cryptodev.c
> @@ -16467,6 +16467,12 @@ test_cryptodev_qat(void)
> return
> run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
> }
>
> +static int
> +test_cryptodev_uadk(void)
> +{
> + return
> run_cryptodev_testsuite(RTE_STR(CRYPTODEV_NAME_UADK_PMD));
> +}
> +
> static int
> test_cryptodev_virtio(void)
> {
> @@ -16810,6 +16816,7 @@
> REGISTER_TEST_COMMAND(cryptodev_sw_mvsam_autotest,
> test_cryptodev_mrvl);
> REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest,
> test_cryptodev_dpaa2_sec);
> REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest,
> test_cryptodev_dpaa_sec);
> REGISTER_TEST_COMMAND(cryptodev_ccp_autotest, test_cryptodev_ccp);
> +REGISTER_TEST_COMMAND(cryptodev_uadk_autotest, test_cryptodev_uadk);
> REGISTER_TEST_COMMAND(cryptodev_virtio_autotest, test_cryptodev_virtio);
> REGISTER_TEST_COMMAND(cryptodev_octeontx_autotest,
> test_cryptodev_octeontx);
> REGISTER_TEST_COMMAND(cryptodev_caam_jr_autotest,
> test_cryptodev_caam_jr);
> diff --git a/app/test/test_cryptodev.h b/app/test/test_cryptodev.h
> index 29a7d4db2b..abd795f54a 100644
> --- a/app/test/test_cryptodev.h
> +++ b/app/test/test_cryptodev.h
> @@ -74,6 +74,7 @@
> #define CRYPTODEV_NAME_CN9K_PMD crypto_cn9k
> #define CRYPTODEV_NAME_CN10K_PMD crypto_cn10k
> #define CRYPTODEV_NAME_MLX5_PMD crypto_mlx5
> +#define CRYPTODEV_NAME_UADK_PMD crypto_uadk
>
>
Add the newly added autotest in "app/test/meson.build" in driver_test_names[]
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [EXT] [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest
2022-10-25 14:54 ` [EXT] " Akhil Goyal
@ 2022-10-26 9:57 ` Zhangfei Gao
0 siblings, 0 replies; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-26 9:57 UTC (permalink / raw)
To: Akhil Goyal
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, thomas, dev, acc
On Tue, 25 Oct 2022 at 22:57, Akhil Goyal <gakhil@marvell.com> wrote:
>
> > Subject: [EXT] [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest
> Rewrite patch title as
> test/crypto: support uadk PMD
>
> >
> Add a line
> Updated test application to run autotest for uadk crypto PMD.
> > Example:
> > sudo dpdk-test --vdev=crypto_uadk --log-level=6
> > RTE>>cryptodev_uadk_autotest
> > RTE>>quit
>
> Add this information in uadk.rst as well.
Is it OK to add uadk.rst change in this patch?
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-24 13:44 [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Zhangfei Gao
` (5 preceding siblings ...)
2022-10-24 13:44 ` [PATCH resend v5 6/6] test/crypto: add cryptodev_uadk_autotest Zhangfei Gao
@ 2022-10-25 14:59 ` Akhil Goyal
2022-10-26 9:53 ` Zhangfei Gao
6 siblings, 1 reply; 17+ messages in thread
From: Akhil Goyal @ 2022-10-25 14:59 UTC (permalink / raw)
To: Zhangfei Gao, Declan Doherty, Fan Zhang, Ashish Gupta,
Ray Kinsella, thomas
Cc: dev, acc
> Introduce a new crypto PMD for hardware accelerators based on UADK [1].
>
> UADK is a framework for user applications to access hardware accelerators.
> UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> the same page table between IOMMU and MMU.
> Thereby user application can directly use virtual address for device dma,
> which enhances the performance as well as easy usability.
>
> [1] https://github.com/Linaro/uadk
>
> Test:
> sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> RTE>>cryptodev_uadk_autotest
> RTE>>quit
>
> resend:
> fix uadk lib, still use <uadk/wd_cipher.h>
There is nothing called as resend in DPDK ML.
Please simply increment version number each time you send the set.
Also add release notes update in the patch
where the driver implementation is complete.
Compilation issues are all done now.
Have sent some other comments on the patches. Please send the v6 ASAP.
We need to close RC2 in a couple of days.
>
> Update in v5
> Patch 1 fix the build issue when uadk is installed to specific folder
> And update doc accordingly
>
> Update in v4:
> Akril suggest dpdk use pkg-config, So
> Enable uadk support x86 local build, and support pkg-config.
> Use pkg-config feature for the uadk crypto pmd.
> Add build uadk library steps in doc
> Test on both x86 and arm.
> x86 can build and install, but can not test since no device.
>
> Resend v3:
> Rebase on next/for-main, which just merged the series
> "cryptodev: rework session framework".
>
> Update in v3:
> Split patches according to Akhil's suggestions
> Please split the patches as below.
> 1. introduce driver - create files with meson.build and with probe/remove
> and device ops defined but not implemented.
> You do not need to write empty functions.
> Add basic documentation also which defines what the driver is.
> You can explain the build dependency here.
> 2. define queue structs and setup/remove APIs
> 3. Add data path
> 4. implement cipher op. Add capabilities and documentation of what is
> supported in each of the patches. Add feature flags etc.
> 5. implement auth, add capabilities and documentation
> 6. test app changes.
>
> Update in v2:
> Change uadk_supported_platform to uadk_crypto_version, which matches
> better
> than platform.
> enum uadk_crypto_version {
> UADK_CRYPTO_V2,
> UADK_CRYPTO_V3,
> };
>
> Update in v1, compared with rfc
>
> Suggested from Akhil Goyal <gakhil@marvell.com>
> Only consider crypto PMD first
> Split patch into small (individually compiled) patches.
> Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini
>
> Zhangfei Gao (6):
> crypto/uadk: introduce uadk crypto driver
> crypto/uadk: support basic operations
> crypto/uadk: support enqueue/dequeue operations
> crypto/uadk: support cipher algorithms
> crypto/uadk: support auth algorithms
> test/crypto: add cryptodev_uadk_autotest
>
> MAINTAINERS | 6 +
> app/test/test_cryptodev.c | 7 +
> app/test/test_cryptodev.h | 1 +
> doc/guides/cryptodevs/features/uadk.ini | 55 ++
> doc/guides/cryptodevs/index.rst | 1 +
> doc/guides/cryptodevs/uadk.rst | 94 ++
> drivers/crypto/meson.build | 1 +
> drivers/crypto/uadk/meson.build | 30 +
> drivers/crypto/uadk/uadk_crypto_pmd.c | 1141 +++++++++++++++++++++++
> drivers/crypto/uadk/version.map | 3 +
> 10 files changed, 1339 insertions(+)
> create mode 100644 doc/guides/cryptodevs/features/uadk.ini
> create mode 100644 doc/guides/cryptodevs/uadk.rst
> create mode 100644 drivers/crypto/uadk/meson.build
> create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c
> create mode 100644 drivers/crypto/uadk/version.map
>
> --
> 2.38.1
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-25 14:59 ` [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver Akhil Goyal
@ 2022-10-26 9:53 ` Zhangfei Gao
2022-10-26 10:16 ` Akhil Goyal
0 siblings, 1 reply; 17+ messages in thread
From: Zhangfei Gao @ 2022-10-26 9:53 UTC (permalink / raw)
To: Akhil Goyal
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, thomas, dev, acc
Hi, Akhil
Thanks for your guidance.
On Tue, 25 Oct 2022 at 23:02, Akhil Goyal <gakhil@marvell.com> wrote:
>
>
> > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> >
> > UADK is a framework for user applications to access hardware accelerators.
> > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > the same page table between IOMMU and MMU.
> > Thereby user application can directly use virtual address for device dma,
> > which enhances the performance as well as easy usability.
> >
> > [1] https://github.com/Linaro/uadk
> >
> > Test:
> > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > RTE>>cryptodev_uadk_autotest
> > RTE>>quit
> >
> > resend:
> > fix uadk lib, still use <uadk/wd_cipher.h>
>
> There is nothing called as resend in DPDK ML.
> Please simply increment version number each time you send the set.
>
>
> Also add release notes update in the patch
> where the driver implementation is complete.
>
> Compilation issues are all done now.
> Have sent some other comments on the patches. Please send the v6 ASAP.
> We need to close RC2 in a couple of days.
>
Got it, have addressed the comments and updated to v6
https://github.com/Linaro/dpdk/commits/next-9.11-v6
Will send tonight.
Some uncertainty
1. The updated uadk.rst
https://github.com/Linaro/dpdk/blob/next-9.11-v6/doc/guides/cryptodevs/uadk.rst
2. About the release notes change,
Do I add a new patch in the last: 07
https://github.com/Linaro/dpdk/commit/f2294300662def012e00d5a3c5466bbf8436904b
Or merge it to the first patch 01.
3. I update uadk.rst and test in the same patch, is that OK.
https://github.com/Linaro/dpdk/commit/4be993e9995def1061dcfdd7863a7f2ba6d5da6c
Thanks
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [EXT] [PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver
2022-10-26 9:53 ` Zhangfei Gao
@ 2022-10-26 10:16 ` Akhil Goyal
0 siblings, 0 replies; 17+ messages in thread
From: Akhil Goyal @ 2022-10-26 10:16 UTC (permalink / raw)
To: Zhangfei Gao
Cc: Declan Doherty, Fan Zhang, Ashish Gupta, Ray Kinsella, thomas, dev, acc
>
> Hi, Akhil
>
> Thanks for your guidance.
>
> On Tue, 25 Oct 2022 at 23:02, Akhil Goyal <gakhil@marvell.com> wrote:
> >
> >
> > > Introduce a new crypto PMD for hardware accelerators based on UADK [1].
> > >
> > > UADK is a framework for user applications to access hardware accelerators.
> > > UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share
> > > the same page table between IOMMU and MMU.
> > > Thereby user application can directly use virtual address for device dma,
> > > which enhances the performance as well as easy usability.
> > >
> > > [1] https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_uadk&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=Dn
> L7Si2wl_PRwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=tyhRlU0KYYHgoC9wyL
> _TYFJMfkt98378qTt70kHNizUdEEmLt_dSBdzMJS4IOREt&s=ZdQO3qCVbcJePPFh
> OGL2IsFh0AoEdndgscdqMT_QzhY&e=
> > >
> > > Test:
> > > sudo dpdk-test --vdev=crypto_uadk (--log-level=6)
> > > RTE>>cryptodev_uadk_autotest
> > > RTE>>quit
> > >
> > > resend:
> > > fix uadk lib, still use <uadk/wd_cipher.h>
> >
> > There is nothing called as resend in DPDK ML.
> > Please simply increment version number each time you send the set.
> >
> >
> > Also add release notes update in the patch
> > where the driver implementation is complete.
> >
> > Compilation issues are all done now.
> > Have sent some other comments on the patches. Please send the v6 ASAP.
> > We need to close RC2 in a couple of days.
> >
>
> Got it, have addressed the comments and updated to v6
> https://urldefense.proofpoint.com/v2/url?u=https-
> 3A__github.com_Linaro_dpdk_commits_next-2D9.11-
> 2Dv6&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=DnL7Si2wl_PRwpZ9TWey3e
> u68gBzn7DkPwuqhd6WNyo&m=tyhRlU0KYYHgoC9wyL_TYFJMfkt98378qTt70kH
> NizUdEEmLt_dSBdzMJS4IOREt&s=8D-
> LSc3u5Dbhbp5kiEynMpS46QYwVLM0AuwAMY5HdYU&e=
> Will send tonight.
>
> Some uncertainty
> 1. The updated uadk.rst
> https://github.com/Linaro/dpdk/blob/next-9.11-v6/doc/guides/cryptodevs/uadk.rst
This seems fine.
>
> 2. About the release notes change,
> Do I add a new patch in the last: 07
> https://github.com/Linaro/dpdk/commit/f2294300662def012e00d5a3c5466bbf8436904b#diff-b994e803545bf8101a466b464d2171d96f01226aee3401862f0c0a3c1897ffb5R199
No need for a separate release notes patch
You can squash it in your last patch.
>
> Or merge it to the first patch 01.
>
> 3. I update uadk.rst and test in the same patch, is that OK.
Yes
>
> Thanks
^ permalink raw reply [flat|nested] 17+ messages in thread