From: Junfeng Guo <junfeng.guo@intel.com>
To: qi.z.zhang@intel.com, jingjing.wu@intel.com,
ferruh.yigit@xilinx.com, beilei.xing@intel.com
Cc: dev@dpdk.org, xiaoyun.li@intel.com, awogbemila@google.com,
bruce.richardson@intel.com, hemant.agrawal@nxp.com,
stephen@networkplumber.org, chenbo.xia@intel.com,
helin.zhang@intel.com, Junfeng Guo <junfeng.guo@intel.com>,
Haiyue Wang <haiyue.wang@intel.com>
Subject: [PATCH v8 3/8] net/gve: add support for device initialization
Date: Tue, 25 Oct 2022 17:07:24 +0800 [thread overview]
Message-ID: <20221025090729.2593603-4-junfeng.guo@intel.com> (raw)
In-Reply-To: <20221025090729.2593603-1-junfeng.guo@intel.com>
Support device init and add following devops skeleton:
- dev_configure
- dev_start
- dev_stop
- dev_close
Note that build system (including doc) is also added in this patch.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
---
MAINTAINERS | 6 +
doc/guides/nics/features/gve.ini | 10 +
doc/guides/nics/gve.rst | 68 +++++
doc/guides/nics/index.rst | 1 +
doc/guides/rel_notes/release_22_11.rst | 5 +
drivers/net/gve/base/gve_adminq.c | 1 +
drivers/net/gve/gve_ethdev.c | 368 +++++++++++++++++++++++++
drivers/net/gve/gve_ethdev.h | 225 +++++++++++++++
drivers/net/gve/gve_logs.h | 14 +
drivers/net/gve/meson.build | 14 +
drivers/net/gve/version.map | 3 +
drivers/net/meson.build | 1 +
12 files changed, 716 insertions(+)
create mode 100644 doc/guides/nics/features/gve.ini
create mode 100644 doc/guides/nics/gve.rst
create mode 100644 drivers/net/gve/gve_ethdev.c
create mode 100644 drivers/net/gve/gve_ethdev.h
create mode 100644 drivers/net/gve/gve_logs.h
create mode 100644 drivers/net/gve/meson.build
create mode 100644 drivers/net/gve/version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 92b381bc30..2d06a76efe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -697,6 +697,12 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Google Virtual Ethernet
+M: Junfeng Guo <junfeng.guo@intel.com>
+F: drivers/net/gve/
+F: doc/guides/nics/gve.rst
+F: doc/guides/nics/features/gve.ini
+
Hisilicon hns3
M: Dongdong Liu <liudongdong3@huawei.com>
M: Yisen Zhuang <yisen.zhuang@huawei.com>
diff --git a/doc/guides/nics/features/gve.ini b/doc/guides/nics/features/gve.ini
new file mode 100644
index 0000000000..44aec28009
--- /dev/null
+++ b/doc/guides/nics/features/gve.ini
@@ -0,0 +1,10 @@
+;
+; Supported features of the Google Virtual Ethernet 'gve' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
diff --git a/doc/guides/nics/gve.rst b/doc/guides/nics/gve.rst
new file mode 100644
index 0000000000..703fbcc5de
--- /dev/null
+++ b/doc/guides/nics/gve.rst
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(C) 2022 Intel Corporation.
+
+GVE poll mode driver
+=======================
+
+The GVE PMD (**librte_net_gve**) provides poll mode driver support for
+Google Virtual Ethernet device (also called as gVNIC).
+
+gVNIC is the standard virtual ethernet interface on Google Cloud Platform (GCP),
+which is one of the multiple virtual interfaces from those leading CSP
+customers in the world.
+
+Please refer to https://cloud.google.com/compute/docs/networking/using-gvnic
+for the device description.
+
+Having a well maintained/optimized gve PMD on DPDK community can help those
+cloud instance consumers with better experience of performance, maintenance
+who wants to run their own VNFs on GCP.
+
+The base code is under MIT license and based on GVE kernel driver v1.3.0.
+GVE base code files are:
+
+- gve_adminq.h
+- gve_adminq.c
+- gve_desc.h
+- gve_desc_dqo.h
+- gve_register.h
+- gve.h
+
+Please refer to https://github.com/GoogleCloudPlatform/compute-virtual-ethernet-linux/tree/v1.3.0/google/gve
+to find the original base code.
+
+GVE has 3 queue formats:
+
+- GQI_QPL - GQI with queue page list
+- GQI_RDA - GQI with raw DMA addressing
+- DQO_RDA - DQO with raw DMA addressing
+
+GQI_QPL queue format is queue page list mode. Driver needs to allocate
+memory and register this memory as a Queue Page List (QPL) in hardware
+(Google Hypervisor/GVE Backend) first. Each queue has its own QPL.
+Then Tx needs to copy packets to QPL memory and put this packet's offset
+in the QPL memory into hardware descriptors so that hardware can get the
+packets data. And Rx needs to read descriptors of offset in QPL to get
+QPL address and copy packets from the address to get real packets data.
+
+GQI_RDA queue format works like usual NICs that driver can put packets'
+physical address into hardware descriptors.
+
+DQO_RDA queue format has submission and completion queue pair for each
+Tx/Rx queue. And similar as GQI_RDA, driver can put packets' physical
+address into hardware descriptors.
+
+Please refer to https://www.kernel.org/doc/html/latest/networking/device_drivers/ethernet/google/gve.html
+to get more information about GVE queue formats.
+
+Features and Limitations
+------------------------
+
+In this release, the GVE PMD provides the basic functionality of packet
+reception and transmission.
+
+Currently, only GQI_QPL and GQI_RDA queue format are supported in PMD.
+Jumbo Frame is not supported in PMD for now. It'll be added in the future
+DPDK release.
+Also, only GQI_QPL queue format is in use on GCP since GQI_RDA hasn't been
+released in production.
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 32c7544968..4d40ea29a3 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -29,6 +29,7 @@ Network Interface Controller Drivers
enetfec
enic
fm10k
+ gve
hinic
hns3
i40e
diff --git a/doc/guides/rel_notes/release_22_11.rst b/doc/guides/rel_notes/release_22_11.rst
index 1c3daf141d..21c366b0e2 100644
--- a/doc/guides/rel_notes/release_22_11.rst
+++ b/doc/guides/rel_notes/release_22_11.rst
@@ -152,6 +152,11 @@ New Features
* Added Q-in-CMB feature controlled by devarg ionic_cmb.
* Added optimized handlers for non-scattered Rx and Tx.
+* **Added GVE net PMD**
+
+ * Added the new ``gve`` net driver for Google Virtual Ethernet devices.
+ * See the :doc:`../nics/gve` NIC guide for more details on this new driver.
+
* **Updated Intel iavf driver.**
* Added flow subscription support.
diff --git a/drivers/net/gve/base/gve_adminq.c b/drivers/net/gve/base/gve_adminq.c
index 045d47615d..e745b709b2 100644
--- a/drivers/net/gve/base/gve_adminq.c
+++ b/drivers/net/gve/base/gve_adminq.c
@@ -3,6 +3,7 @@
* Copyright (C) 2015-2022 Google, Inc.
*/
+#include "../gve_ethdev.h"
#include "gve_adminq.h"
#include "gve_register.h"
diff --git a/drivers/net/gve/gve_ethdev.c b/drivers/net/gve/gve_ethdev.c
new file mode 100644
index 0000000000..acbb412509
--- /dev/null
+++ b/drivers/net/gve/gve_ethdev.c
@@ -0,0 +1,368 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2022 Intel Corporation
+ */
+#include <linux/pci_regs.h>
+
+#include "gve_ethdev.h"
+#include "base/gve_adminq.h"
+#include "base/gve_register.h"
+
+const char gve_version_str[] = GVE_VERSION;
+static const char gve_version_prefix[] = GVE_VERSION_PREFIX;
+
+static void
+gve_write_version(uint8_t *driver_version_register)
+{
+ const char *c = gve_version_prefix;
+
+ while (*c) {
+ writeb(*c, driver_version_register);
+ c++;
+ }
+
+ c = gve_version_str;
+ while (*c) {
+ writeb(*c, driver_version_register);
+ c++;
+ }
+ writeb('\n', driver_version_register);
+}
+
+static int
+gve_dev_configure(__rte_unused struct rte_eth_dev *dev)
+{
+ return 0;
+}
+
+static int
+gve_dev_start(struct rte_eth_dev *dev)
+{
+ dev->data->dev_started = 1;
+
+ return 0;
+}
+
+static int
+gve_dev_stop(struct rte_eth_dev *dev)
+{
+ dev->data->dev_link.link_status = RTE_ETH_LINK_DOWN;
+ dev->data->dev_started = 0;
+
+ return 0;
+}
+
+static int
+gve_dev_close(struct rte_eth_dev *dev)
+{
+ int err = 0;
+
+ if (dev->data->dev_started) {
+ err = gve_dev_stop(dev);
+ if (err != 0)
+ PMD_DRV_LOG(ERR, "Failed to stop dev.");
+ }
+
+ dev->data->mac_addrs = NULL;
+
+ return err;
+}
+
+static const struct eth_dev_ops gve_eth_dev_ops = {
+ .dev_configure = gve_dev_configure,
+ .dev_start = gve_dev_start,
+ .dev_stop = gve_dev_stop,
+ .dev_close = gve_dev_close,
+};
+
+static void
+gve_free_counter_array(struct gve_priv *priv)
+{
+ rte_memzone_free(priv->cnt_array_mz);
+ priv->cnt_array = NULL;
+}
+
+static void
+gve_free_irq_db(struct gve_priv *priv)
+{
+ rte_memzone_free(priv->irq_dbs_mz);
+ priv->irq_dbs = NULL;
+}
+
+static void
+gve_teardown_device_resources(struct gve_priv *priv)
+{
+ int err;
+
+ /* Tell device its resources are being freed */
+ if (gve_get_device_resources_ok(priv)) {
+ err = gve_adminq_deconfigure_device_resources(priv);
+ if (err)
+ PMD_DRV_LOG(ERR, "Could not deconfigure device resources: err=%d", err);
+ }
+ gve_free_counter_array(priv);
+ gve_free_irq_db(priv);
+ gve_clear_device_resources_ok(priv);
+}
+
+static uint8_t
+pci_dev_find_capability(struct rte_pci_device *pdev, int cap)
+{
+ uint8_t pos, id;
+ uint16_t ent;
+ int loops;
+ int ret;
+
+ ret = rte_pci_read_config(pdev, &pos, sizeof(pos), PCI_CAPABILITY_LIST);
+ if (ret != sizeof(pos))
+ return 0;
+
+ loops = (PCI_CFG_SPACE_SIZE - PCI_STD_HEADER_SIZEOF) / PCI_CAP_SIZEOF;
+
+ while (pos && loops--) {
+ ret = rte_pci_read_config(pdev, &ent, sizeof(ent), pos);
+ if (ret != sizeof(ent))
+ return 0;
+
+ id = ent & 0xff;
+ if (id == 0xff)
+ break;
+
+ if (id == cap)
+ return pos;
+
+ pos = (ent >> 8);
+ }
+
+ return 0;
+}
+
+static int
+pci_dev_msix_vec_count(struct rte_pci_device *pdev)
+{
+ uint8_t msix_cap = pci_dev_find_capability(pdev, PCI_CAP_ID_MSIX);
+ uint16_t control;
+ int ret;
+
+ if (!msix_cap)
+ return 0;
+
+ ret = rte_pci_read_config(pdev, &control, sizeof(control), msix_cap + PCI_MSIX_FLAGS);
+ if (ret != sizeof(control))
+ return 0;
+
+ return (control & PCI_MSIX_FLAGS_QSIZE) + 1;
+}
+
+static int
+gve_setup_device_resources(struct gve_priv *priv)
+{
+ char z_name[RTE_MEMZONE_NAMESIZE];
+ const struct rte_memzone *mz;
+ int err = 0;
+
+ snprintf(z_name, sizeof(z_name), "gve_%s_cnt_arr", priv->pci_dev->device.name);
+ mz = rte_memzone_reserve_aligned(z_name,
+ priv->num_event_counters * sizeof(*priv->cnt_array),
+ rte_socket_id(), RTE_MEMZONE_IOVA_CONTIG,
+ PAGE_SIZE);
+ if (mz == NULL) {
+ PMD_DRV_LOG(ERR, "Could not alloc memzone for count array");
+ return -ENOMEM;
+ }
+ priv->cnt_array = (rte_be32_t *)mz->addr;
+ priv->cnt_array_mz = mz;
+
+ snprintf(z_name, sizeof(z_name), "gve_%s_irqmz", priv->pci_dev->device.name);
+ mz = rte_memzone_reserve_aligned(z_name,
+ sizeof(*priv->irq_dbs) * (priv->num_ntfy_blks),
+ rte_socket_id(), RTE_MEMZONE_IOVA_CONTIG,
+ PAGE_SIZE);
+ if (mz == NULL) {
+ PMD_DRV_LOG(ERR, "Could not alloc memzone for irq_dbs");
+ err = -ENOMEM;
+ goto free_cnt_array;
+ }
+ priv->irq_dbs = (struct gve_irq_db *)mz->addr;
+ priv->irq_dbs_mz = mz;
+
+ err = gve_adminq_configure_device_resources(priv,
+ priv->cnt_array_mz->iova,
+ priv->num_event_counters,
+ priv->irq_dbs_mz->iova,
+ priv->num_ntfy_blks);
+ if (unlikely(err)) {
+ PMD_DRV_LOG(ERR, "Could not config device resources: err=%d", err);
+ goto free_irq_dbs;
+ }
+ return 0;
+
+free_irq_dbs:
+ gve_free_irq_db(priv);
+free_cnt_array:
+ gve_free_counter_array(priv);
+
+ return err;
+}
+
+static int
+gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
+{
+ int num_ntfy;
+ int err;
+
+ /* Set up the adminq */
+ err = gve_adminq_alloc(priv);
+ if (err) {
+ PMD_DRV_LOG(ERR, "Failed to alloc admin queue: err=%d", err);
+ return err;
+ }
+
+ if (skip_describe_device)
+ goto setup_device;
+
+ /* Get the initial information we need from the device */
+ err = gve_adminq_describe_device(priv);
+ if (err) {
+ PMD_DRV_LOG(ERR, "Could not get device information: err=%d", err);
+ goto free_adminq;
+ }
+
+ num_ntfy = pci_dev_msix_vec_count(priv->pci_dev);
+ if (num_ntfy <= 0) {
+ PMD_DRV_LOG(ERR, "Could not count MSI-x vectors");
+ err = -EIO;
+ goto free_adminq;
+ } else if (num_ntfy < GVE_MIN_MSIX) {
+ PMD_DRV_LOG(ERR, "GVE needs at least %d MSI-x vectors, but only has %d",
+ GVE_MIN_MSIX, num_ntfy);
+ err = -EINVAL;
+ goto free_adminq;
+ }
+
+ priv->num_registered_pages = 0;
+
+ /* gvnic has one Notification Block per MSI-x vector, except for the
+ * management vector
+ */
+ priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+ priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+ priv->max_nb_txq = RTE_MIN(priv->max_nb_txq, priv->num_ntfy_blks / 2);
+ priv->max_nb_rxq = RTE_MIN(priv->max_nb_rxq, priv->num_ntfy_blks / 2);
+
+ if (priv->default_num_queues > 0) {
+ priv->max_nb_txq = RTE_MIN(priv->default_num_queues, priv->max_nb_txq);
+ priv->max_nb_rxq = RTE_MIN(priv->default_num_queues, priv->max_nb_rxq);
+ }
+
+ PMD_DRV_LOG(INFO, "Max TX queues %d, Max RX queues %d",
+ priv->max_nb_txq, priv->max_nb_rxq);
+
+setup_device:
+ err = gve_setup_device_resources(priv);
+ if (!err)
+ return 0;
+free_adminq:
+ gve_adminq_free(priv);
+ return err;
+}
+
+static void
+gve_teardown_priv_resources(struct gve_priv *priv)
+{
+ gve_teardown_device_resources(priv);
+ gve_adminq_free(priv);
+}
+
+static int
+gve_dev_init(struct rte_eth_dev *eth_dev)
+{
+ struct gve_priv *priv = eth_dev->data->dev_private;
+ int max_tx_queues, max_rx_queues;
+ struct rte_pci_device *pci_dev;
+ struct gve_registers *reg_bar;
+ rte_be32_t *db_bar;
+ int err;
+
+ eth_dev->dev_ops = &gve_eth_dev_ops;
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
+
+ reg_bar = pci_dev->mem_resource[GVE_REG_BAR].addr;
+ if (!reg_bar) {
+ PMD_DRV_LOG(ERR, "Failed to map pci bar!");
+ return -ENOMEM;
+ }
+
+ db_bar = pci_dev->mem_resource[GVE_DB_BAR].addr;
+ if (!db_bar) {
+ PMD_DRV_LOG(ERR, "Failed to map doorbell bar!");
+ return -ENOMEM;
+ }
+
+ gve_write_version(®_bar->driver_version);
+ /* Get max queues to alloc etherdev */
+ max_tx_queues = ioread32be(®_bar->max_tx_queues);
+ max_rx_queues = ioread32be(®_bar->max_rx_queues);
+
+ priv->reg_bar0 = reg_bar;
+ priv->db_bar2 = db_bar;
+ priv->pci_dev = pci_dev;
+ priv->state_flags = 0x0;
+
+ priv->max_nb_txq = max_tx_queues;
+ priv->max_nb_rxq = max_rx_queues;
+
+ err = gve_init_priv(priv, false);
+ if (err)
+ return err;
+
+ eth_dev->data->mac_addrs = &priv->dev_addr;
+
+ return 0;
+}
+
+static int
+gve_dev_uninit(struct rte_eth_dev *eth_dev)
+{
+ struct gve_priv *priv = eth_dev->data->dev_private;
+
+ gve_teardown_priv_resources(priv);
+
+ eth_dev->data->mac_addrs = NULL;
+
+ return 0;
+}
+
+static int
+gve_pci_probe(__rte_unused struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_probe(pci_dev, sizeof(struct gve_priv), gve_dev_init);
+}
+
+static int
+gve_pci_remove(struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_remove(pci_dev, gve_dev_uninit);
+}
+
+static const struct rte_pci_id pci_id_gve_map[] = {
+ { RTE_PCI_DEVICE(GOOGLE_VENDOR_ID, GVE_DEV_ID) },
+ { .device_id = 0 },
+};
+
+static struct rte_pci_driver rte_gve_pmd = {
+ .id_table = pci_id_gve_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+ .probe = gve_pci_probe,
+ .remove = gve_pci_remove,
+};
+
+RTE_PMD_REGISTER_PCI(net_gve, rte_gve_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(net_gve, pci_id_gve_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_gve, "* igb_uio | vfio-pci");
+RTE_LOG_REGISTER_SUFFIX(gve_logtype_driver, driver, NOTICE);
diff --git a/drivers/net/gve/gve_ethdev.h b/drivers/net/gve/gve_ethdev.h
new file mode 100644
index 0000000000..2ac2a46ac1
--- /dev/null
+++ b/drivers/net/gve/gve_ethdev.h
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2022 Intel Corporation
+ */
+
+#ifndef _GVE_ETHDEV_H_
+#define _GVE_ETHDEV_H_
+
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
+#include <rte_ether.h>
+
+#include "base/gve.h"
+
+#define GVE_DEFAULT_RX_FREE_THRESH 512
+#define GVE_DEFAULT_TX_FREE_THRESH 256
+#define GVE_TX_MAX_FREE_SZ 512
+
+#define GVE_MIN_BUF_SIZE 1024
+#define GVE_MAX_RX_PKTLEN 65535
+
+/* A list of pages registered with the device during setup and used by a queue
+ * as buffers
+ */
+struct gve_queue_page_list {
+ uint32_t id; /* unique id */
+ uint32_t num_entries;
+ dma_addr_t *page_buses; /* the dma addrs of the pages */
+ const struct rte_memzone *mz;
+};
+
+/* A TX desc ring entry */
+union gve_tx_desc {
+ struct gve_tx_pkt_desc pkt; /* first desc for a packet */
+ struct gve_tx_seg_desc seg; /* subsequent descs for a packet */
+};
+
+struct gve_tx_queue {
+ volatile union gve_tx_desc *tx_desc_ring;
+ const struct rte_memzone *mz;
+ uint64_t tx_ring_phys_addr;
+
+ uint16_t nb_tx_desc;
+
+ /* Only valid for DQO_QPL queue format */
+ struct gve_queue_page_list *qpl;
+
+ uint16_t port_id;
+ uint16_t queue_id;
+
+ uint16_t ntfy_id;
+ volatile rte_be32_t *ntfy_addr;
+
+ struct gve_priv *hw;
+ const struct rte_memzone *qres_mz;
+ struct gve_queue_resources *qres;
+
+ /* Only valid for DQO_RDA queue format */
+ struct gve_tx_queue *complq;
+};
+
+struct gve_rx_queue {
+ volatile struct gve_rx_desc *rx_desc_ring;
+ volatile union gve_rx_data_slot *rx_data_ring;
+ const struct rte_memzone *mz;
+ const struct rte_memzone *data_mz;
+ uint64_t rx_ring_phys_addr;
+
+ uint16_t nb_rx_desc;
+
+ volatile rte_be32_t *ntfy_addr;
+
+ /* only valid for GQI_QPL queue format */
+ struct gve_queue_page_list *qpl;
+
+ struct gve_priv *hw;
+ const struct rte_memzone *qres_mz;
+ struct gve_queue_resources *qres;
+
+ uint16_t port_id;
+ uint16_t queue_id;
+ uint16_t ntfy_id;
+ uint16_t rx_buf_len;
+
+ /* Only valid for DQO_RDA queue format */
+ struct gve_rx_queue *bufq;
+};
+
+struct gve_priv {
+ struct gve_irq_db *irq_dbs; /* array of num_ntfy_blks */
+ const struct rte_memzone *irq_dbs_mz;
+ uint32_t mgmt_msix_idx;
+ rte_be32_t *cnt_array; /* array of num_event_counters */
+ const struct rte_memzone *cnt_array_mz;
+
+ uint16_t num_event_counters;
+ uint16_t tx_desc_cnt; /* txq size */
+ uint16_t rx_desc_cnt; /* rxq size */
+ uint16_t tx_pages_per_qpl; /* tx buffer length */
+ uint16_t rx_data_slot_cnt; /* rx buffer length */
+
+ /* Only valid for DQO_RDA queue format */
+ uint16_t tx_compq_size; /* tx completion queue size */
+ uint16_t rx_bufq_size; /* rx buff queue size */
+
+ uint64_t max_registered_pages;
+ uint64_t num_registered_pages; /* num pages registered with NIC */
+ uint16_t default_num_queues; /* default num queues to set up */
+ enum gve_queue_format queue_format; /* see enum gve_queue_format */
+ uint8_t enable_rsc;
+
+ uint16_t max_nb_txq;
+ uint16_t max_nb_rxq;
+ uint32_t num_ntfy_blks; /* spilt between TX and RX so must be even */
+
+ struct gve_registers __iomem *reg_bar0; /* see gve_register.h */
+ rte_be32_t __iomem *db_bar2; /* "array" of doorbells */
+ struct rte_pci_device *pci_dev;
+
+ /* Admin queue - see gve_adminq.h*/
+ union gve_adminq_command *adminq;
+ struct gve_dma_mem adminq_dma_mem;
+ uint32_t adminq_mask; /* masks prod_cnt to adminq size */
+ uint32_t adminq_prod_cnt; /* free-running count of AQ cmds executed */
+ uint32_t adminq_cmd_fail; /* free-running count of AQ cmds failed */
+ uint32_t adminq_timeouts; /* free-running count of AQ cmds timeouts */
+ /* free-running count of per AQ cmd executed */
+ uint32_t adminq_describe_device_cnt;
+ uint32_t adminq_cfg_device_resources_cnt;
+ uint32_t adminq_register_page_list_cnt;
+ uint32_t adminq_unregister_page_list_cnt;
+ uint32_t adminq_create_tx_queue_cnt;
+ uint32_t adminq_create_rx_queue_cnt;
+ uint32_t adminq_destroy_tx_queue_cnt;
+ uint32_t adminq_destroy_rx_queue_cnt;
+ uint32_t adminq_dcfg_device_resources_cnt;
+ uint32_t adminq_set_driver_parameter_cnt;
+ uint32_t adminq_report_stats_cnt;
+ uint32_t adminq_report_link_speed_cnt;
+ uint32_t adminq_get_ptype_map_cnt;
+
+ volatile uint32_t state_flags;
+
+ /* Gvnic device link speed from hypervisor. */
+ uint64_t link_speed;
+
+ uint16_t max_mtu;
+ struct rte_ether_addr dev_addr; /* mac address */
+
+ struct gve_queue_page_list *qpl;
+
+ struct gve_tx_queue **txqs;
+ struct gve_rx_queue **rxqs;
+};
+
+static inline bool
+gve_is_gqi(struct gve_priv *priv)
+{
+ return priv->queue_format == GVE_GQI_RDA_FORMAT ||
+ priv->queue_format == GVE_GQI_QPL_FORMAT;
+}
+
+static inline bool
+gve_get_admin_queue_ok(struct gve_priv *priv)
+{
+ return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_set_admin_queue_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_set32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_clear_admin_queue_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK,
+ &priv->state_flags);
+}
+
+static inline bool
+gve_get_device_resources_ok(struct gve_priv *priv)
+{
+ return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_set_device_resources_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_set32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_clear_device_resources_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK,
+ &priv->state_flags);
+}
+
+static inline bool
+gve_get_device_rings_ok(struct gve_priv *priv)
+{
+ return !!rte_bit_relaxed_get32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_set_device_rings_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_set32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
+ &priv->state_flags);
+}
+
+static inline void
+gve_clear_device_rings_ok(struct gve_priv *priv)
+{
+ rte_bit_relaxed_clear32(GVE_PRIV_FLAGS_DEVICE_RINGS_OK,
+ &priv->state_flags);
+}
+
+#endif /* _GVE_ETHDEV_H_ */
diff --git a/drivers/net/gve/gve_logs.h b/drivers/net/gve/gve_logs.h
new file mode 100644
index 0000000000..0d02da46e1
--- /dev/null
+++ b/drivers/net/gve/gve_logs.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2022 Intel Corporation
+ */
+
+#ifndef _GVE_LOGS_H_
+#define _GVE_LOGS_H_
+
+extern int gve_logtype_driver;
+
+#define PMD_DRV_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, gve_logtype_driver, "%s(): " fmt "\n", \
+ __func__, ## args)
+
+#endif
diff --git a/drivers/net/gve/meson.build b/drivers/net/gve/meson.build
new file mode 100644
index 0000000000..d8ec64b3a3
--- /dev/null
+++ b/drivers/net/gve/meson.build
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2022 Intel Corporation
+
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
+sources = files(
+ 'base/gve_adminq.c',
+ 'gve_ethdev.c',
+)
+includes += include_directories('base')
diff --git a/drivers/net/gve/version.map b/drivers/net/gve/version.map
new file mode 100644
index 0000000000..78c3585d7c
--- /dev/null
+++ b/drivers/net/gve/version.map
@@ -0,0 +1,3 @@
+DPDK_23 {
+ local: *;
+};
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 35bfa78dee..355dbd07e9 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -23,6 +23,7 @@ drivers = [
'enic',
'failsafe',
'fm10k',
+ 'gve',
'hinic',
'hns3',
'i40e',
--
2.34.1
next prev parent reply other threads:[~2022-10-25 9:09 UTC|newest]
Thread overview: 192+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-29 19:30 [PATCH 00/10] introduce GVE PMD Xiaoyun Li
2022-07-29 19:30 ` [PATCH 01/10] net/gve: introduce GVE PMD base code Xiaoyun Li
2022-07-29 22:42 ` Stephen Hemminger
2022-07-29 22:45 ` Stephen Hemminger
2022-08-23 8:44 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 00/10] introduce GVE PMD Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 01/10] net/gve: introduce GVE PMD base code Junfeng Guo
2022-09-01 17:19 ` Ferruh Yigit
2022-09-01 18:23 ` Stephen Hemminger
2022-09-01 20:49 ` Thomas Monjalon
2022-09-06 9:31 ` Guo, Junfeng
2022-09-14 10:38 ` Thomas Monjalon
2022-08-29 8:41 ` [PATCH v2 02/10] net/gve: add logs and OS specific implementation Junfeng Guo
2022-09-01 17:20 ` Ferruh Yigit
2022-09-07 6:58 ` Guo, Junfeng
2022-09-07 11:16 ` Ferruh Yigit
2022-09-08 8:09 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 03/10] net/gve: support device initialization Junfeng Guo
2022-09-01 17:21 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-09-01 17:22 ` Ferruh Yigit
2022-08-29 8:41 ` [PATCH v2 04/10] net/gve: add link update support Junfeng Guo
2022-09-01 17:23 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 05/10] net/gve: add MTU set support Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 06/10] net/gve: add queue operations Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 07/10] net/gve: add Rx/Tx support Junfeng Guo
2022-08-29 8:41 ` [PATCH v2 08/10] net/gve: add support to get dev info and configure dev Junfeng Guo
2022-09-01 17:23 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 09/10] net/gve: add stats support Junfeng Guo
2022-09-01 17:24 ` Ferruh Yigit
2022-09-23 9:38 ` Guo, Junfeng
2022-08-29 8:41 ` [PATCH v2 10/10] doc: update documentation Junfeng Guo
2022-09-01 17:20 ` Ferruh Yigit
2022-09-23 9:38 ` [PATCH v3 0/9] introduce GVE PMD Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 1/9] net/gve: introduce GVE PMD base code Junfeng Guo
2022-09-23 18:57 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-23 18:58 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 0/9] introduce GVE PMD Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 1/9] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-06 14:19 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 0/8] introduce GVE PMD Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 1/8] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-19 13:45 ` Ferruh Yigit
2022-10-19 15:13 ` Hemant Agrawal
2022-10-19 15:18 ` Ferruh Yigit
2022-10-20 3:33 ` Hemant Agrawal
2022-10-19 15:48 ` Li, Xiaoyun
2022-10-19 20:52 ` Ferruh Yigit
2022-10-20 8:50 ` Li, Xiaoyun
2022-10-20 10:36 ` [PATCH v6 0/8] introduce GVE PMD Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 1/8] net/gve/base: introduce GVE PMD base code Junfeng Guo
2022-10-20 14:39 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 14:40 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-20 14:42 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 4/8] net/gve: add support for link update Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-20 14:45 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-20 14:45 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-20 10:36 ` [PATCH v6 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-20 10:36 ` [PATCH v6 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-20 14:47 ` Ferruh Yigit
2022-10-24 2:10 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 0/8] introduce GVE PMD Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 1/8] net/gve/base: introduce base code Junfeng Guo
2022-10-21 9:49 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:26 ` Guo, Junfeng
2022-10-25 9:07 ` [PATCH v8 0/8] introduce GVE PMD Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 1/8] net/gve/base: introduce base code Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-25 9:07 ` Junfeng Guo [this message]
2022-10-25 9:07 ` [PATCH v8 4/8] net/gve: add support for link update Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-25 15:55 ` Stephen Hemminger
2022-10-26 2:15 ` Guo, Junfeng
2022-10-25 9:07 ` [PATCH v8 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-25 9:07 ` [PATCH v8 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-25 12:33 ` [PATCH v8 0/8] introduce GVE PMD Ferruh Yigit
2022-10-26 2:05 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-21 9:49 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:22 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 4/8] net/gve: add support for link update Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-21 9:50 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:47 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-21 9:51 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:48 ` Ferruh Yigit
2022-10-24 13:23 ` Guo, Junfeng
2022-10-21 9:19 ` [PATCH v7 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-21 9:19 ` [PATCH v7 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-21 9:52 ` Ferruh Yigit
2022-10-24 5:04 ` Guo, Junfeng
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:25 ` Guo, Junfeng
2022-10-25 9:07 ` Guo, Junfeng
2022-10-21 13:12 ` [PATCH v7 0/8] introduce GVE PMD Ferruh Yigit
2022-10-24 10:50 ` Ferruh Yigit
2022-10-24 13:25 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 2/8] net/gve/base: add OS specific implementation Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 3/8] net/gve: add support for device initialization Junfeng Guo
2022-10-19 13:46 ` Ferruh Yigit
2022-10-19 15:59 ` Li, Xiaoyun
2022-10-19 21:00 ` Ferruh Yigit
2022-10-20 9:29 ` Guo, Junfeng
2022-10-20 11:15 ` Ferruh Yigit
2022-10-21 4:46 ` Guo, Junfeng
2022-10-19 13:47 ` Ferruh Yigit
2022-10-19 14:02 ` Xia, Chenbo
2022-10-19 14:24 ` Zhang, Helin
2022-10-19 21:16 ` Ferruh Yigit
2022-10-19 16:20 ` Li, Xiaoyun
2022-10-10 10:17 ` [PATCH v5 4/8] net/gve: add support for link update Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 5/8] net/gve: add support for MTU setting Junfeng Guo
2022-10-19 13:47 ` Ferruh Yigit
2022-10-20 10:14 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 6/8] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-19 13:49 ` Ferruh Yigit
2022-10-20 9:29 ` Guo, Junfeng
2022-10-20 11:19 ` Ferruh Yigit
2022-10-21 5:22 ` Guo, Junfeng
2022-10-10 10:17 ` [PATCH v5 7/8] net/gve: add support for queue operations Junfeng Guo
2022-10-10 10:17 ` [PATCH v5 8/8] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-19 13:47 ` Ferruh Yigit
2022-10-20 9:34 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 2/9] net/gve/base: add logs and OS specific implementation Junfeng Guo
2022-10-06 14:20 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 3/9] net/gve: add support for device initialization Junfeng Guo
2022-10-06 14:22 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 4/9] net/gve: add support for link update Junfeng Guo
2022-10-06 14:23 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 5/9] net/gve: add support for MTU setting Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 6/9] net/gve: add support for queue operations Junfeng Guo
2022-09-27 7:32 ` [PATCH v4 7/9] net/gve: add support for Rx/Tx Junfeng Guo
2022-10-06 14:24 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-10-10 9:39 ` Li, Xiaoyun
2022-10-10 10:18 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 8/9] net/gve: add support for dev info get and dev configure Junfeng Guo
2022-10-06 14:25 ` Ferruh Yigit
2022-10-09 9:14 ` Guo, Junfeng
2022-09-27 7:32 ` [PATCH v4 9/9] net/gve: add support for stats Junfeng Guo
2022-10-06 14:25 ` Ferruh Yigit
2022-10-09 9:15 ` Guo, Junfeng
2022-09-23 9:38 ` [PATCH v3 2/9] net/gve: add logs and OS specific implementation Junfeng Guo
2022-09-23 19:01 ` Stephen Hemminger
2022-09-27 7:27 ` Guo, Junfeng
2022-09-23 9:38 ` [PATCH v3 3/9] net/gve: support device initialization Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 4/9] net/gve: add link update support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 5/9] net/gve: add MTU set support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 6/9] net/gve: add queue operations Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 7/9] net/gve: add Rx/Tx support Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 8/9] net/gve: add support to get dev info and configure dev Junfeng Guo
2022-09-23 9:38 ` [PATCH v3 9/9] net/gve: add stats support Junfeng Guo
2022-09-01 17:19 ` [PATCH v2 00/10] introduce GVE PMD Ferruh Yigit
2022-09-07 2:09 ` Guo, Junfeng
2022-07-29 19:30 ` [PATCH 02/10] net/gve: add logs and OS specific implementation Xiaoyun Li
2022-07-29 19:30 ` [PATCH 03/10] net/gve: support device initialization Xiaoyun Li
2022-07-29 19:30 ` [PATCH 04/10] net/gve: add link update support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 05/10] net/gve: add MTU set support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 06/10] net/gve: add queue operations Xiaoyun Li
2022-07-29 19:30 ` [PATCH 07/10] net/gve: add Rx/Tx support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 08/10] net/gve: add support to get dev info and configure dev Xiaoyun Li
2022-07-29 19:30 ` [PATCH 09/10] net/gve: add stats support Xiaoyun Li
2022-07-29 19:30 ` [PATCH 10/10] doc: update documentation Xiaoyun Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221025090729.2593603-4-junfeng.guo@intel.com \
--to=junfeng.guo@intel.com \
--cc=awogbemila@google.com \
--cc=beilei.xing@intel.com \
--cc=bruce.richardson@intel.com \
--cc=chenbo.xia@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@xilinx.com \
--cc=haiyue.wang@intel.com \
--cc=helin.zhang@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jingjing.wu@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=stephen@networkplumber.org \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).