[PATCH V4 4/5] app/testpmd: add attach and detach port for multiple process

[Huisong Li <lihuisong@huawei.com>]

This patch supports attach and detach port in primary and secondary
process.

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 app/test-pmd/testpmd.c                | 38 ++++++++++++++++-----------
 app/test-pmd/testpmd.h                |  1 -
 drivers/net/bonding/bonding_testpmd.c |  1 -
 3 files changed, 22 insertions(+), 18 deletions(-)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index bc25703490..2e6329c853 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -3463,15 +3463,12 @@ attach_port(char *identifier)
 		return;
 	}
 
-	/* first attach mode: event */
-	if (setup_on_probe_event) {
-		/* new ports are detected on RTE_ETH_EVENT_NEW event */
-		for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
-			if (ports[pi].port_status == RTE_PORT_HANDLING &&
-					ports[pi].need_setup != 0)
-				setup_attached_port(pi);
+	/*
+	 * first attach mode: event, setting up attached port is done in
+	 * probing callback.
+	 */
+	if (setup_on_probe_event)
 		return;
-	}
 
 	/* second attach mode: iterator */
 	RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
@@ -3502,7 +3499,6 @@ setup_attached_port(portid_t pi)
 	ports_ids[nb_ports++] = pi;
 	fwd_ports_ids[nb_fwd_ports++] = pi;
 	nb_cfg_ports = nb_fwd_ports;
-	ports[pi].need_setup = 0;
 	ports[pi].port_status = RTE_PORT_STOPPED;
 
 	printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
@@ -3536,10 +3532,8 @@ detach_device(struct rte_device *dev)
 		TESTPMD_LOG(ERR, "Failed to detach device %s\n", rte_dev_name(dev));
 		return;
 	}
-	remove_invalid_ports();
 
 	printf("Device is detached\n");
-	printf("Now total ports is %d\n", nb_ports);
 	printf("Done\n");
 	return;
 }
@@ -3606,11 +3600,9 @@ detach_devargs(char *identifier)
 		return;
 	}
 
-	remove_invalid_ports();
-
 	printf("Device %s is detached\n", identifier);
-	printf("Now total ports is %d\n", nb_ports);
 	printf("Done\n");
+
 	rte_devargs_reset(&da);
 }
 
@@ -3774,11 +3766,22 @@ rmv_port_callback(void *arg)
 		struct rte_device *device = dev_info.device;
 		close_port(port_id);
 		detach_device(device); /* might be already removed or have more ports */
+		remove_invalid_ports();
+		printf("Now total ports is %d\n", nb_ports);
 	}
 	if (need_to_start)
 		start_packet_forwarding(0);
 }
 
+static void
+remove_invalid_ports_callback(void *arg)
+{
+	RTE_SET_USED(arg);
+
+	remove_invalid_ports();
+	printf("Now total ports is %d\n", nb_ports);
+}
+
 /* This function is used by the interrupt thread */
 static int
 eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
@@ -3803,8 +3806,8 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
 
 	switch (type) {
 	case RTE_ETH_EVENT_NEW:
-		ports[port_id].need_setup = 1;
-		ports[port_id].port_status = RTE_PORT_HANDLING;
+		if (setup_on_probe_event)
+			setup_attached_port(port_id);
 		break;
 	case RTE_ETH_EVENT_INTR_RMV:
 		if (rte_eal_alarm_set(100000,
@@ -3815,6 +3818,9 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
 	case RTE_ETH_EVENT_DESTROY:
 		ports[port_id].port_status = RTE_PORT_CLOSED;
 		printf("Port %u is closed\n", port_id);
+		if (rte_eal_alarm_set(100000, remove_invalid_ports_callback,
+			(void *)(intptr_t)port_id))
+			fprintf(stderr, "Could not set up deferred device released\n");
 		break;
 	case RTE_ETH_EVENT_RX_AVAIL_THRESH: {
 		uint16_t rxq_id;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 7d24d25970..080d3a1139 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -306,7 +306,6 @@ struct rte_port {
 	uint16_t                tx_vlan_id;/**< The tag ID */
 	uint16_t                tx_vlan_id_outer;/**< The outer tag ID */
 	volatile uint16_t        port_status;    /**< port started or not */
-	uint8_t                 need_setup;     /**< port just attached */
 	uint8_t                 need_reconfig;  /**< need reconfiguring port or not */
 	uint8_t                 need_reconfig_queues; /**< need reconfiguring queues or not */
 	uint8_t                 rss_flag;   /**< enable rss or not */
diff --git a/drivers/net/bonding/bonding_testpmd.c b/drivers/net/bonding/bonding_testpmd.c
index 9529e16fb6..9216271314 100644
--- a/drivers/net/bonding/bonding_testpmd.c
+++ b/drivers/net/bonding/bonding_testpmd.c
@@ -765,7 +765,6 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
 
 	ports[port_id].update_conf = 1;
 	ports[port_id].bond_flag = 1;
-	ports[port_id].need_setup = 0;
 	ports[port_id].port_status = RTE_PORT_STOPPED;
 }
 
-- 
2.22.0