[PATCH v2 0/3] test/bbdev: fix build issues with optional build flag

[PATCH v2 0/3] test/bbdev: fix build issues with optional build flag

[Nicolas Chautru]

v2: add check in offload test function for error during allocation
suggested by Maxime.
Fixing compilation errors in bbdev-test application on rc4
when the optional flag RTE_BBDEV_OFFLOAD_COST is set manually.
This was raised by Vipin. 

Nicolas Chautru (3):
  test/bbdev: fix build issue with optional build flag
  test/bbdev: fix build issue with optional build flag
  test/bbdev: explicit check for allocation failure

 app/test-bbdev/test_bbdev_perf.c | 93 ++++++++++++++++++++++++++++++--
 1 file changed, 89 insertions(+), 4 deletions(-)

-- 
2.37.1

[PATCH v2 1/3] test/bbdev: fix build issue with optional build flag

[Nicolas Chautru]

Incorrect bbdev member name used in test code under
RTE_BBDEV_OFFLOAD_COST build flag.

Fixes: 4f08028c5e24 ("bbdev: expose queue related warning and status")

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 app/test-bbdev/test_bbdev_perf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index b285d3f3a7..1859952901 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -4933,8 +4933,8 @@ get_bbdev_queue_stats(uint16_t dev_id, uint16_t queue_id,
 	stats->dequeued_count = q_stats->dequeued_count;
 	stats->enqueue_err_count = q_stats->enqueue_err_count;
 	stats->dequeue_err_count = q_stats->dequeue_err_count;
-	stats->enqueue_warning_count = q_stats->enqueue_warning_count;
-	stats->dequeue_warning_count = q_stats->dequeue_warning_count;
+	stats->enqueue_warn_count = q_stats->enqueue_warn_count;
+	stats->dequeue_warn_count = q_stats->dequeue_warn_count;
 	stats->acc_offload_cycles = q_stats->acc_offload_cycles;
 
 	return 0;
-- 
2.37.1

[PATCH v2 2/3] test/bbdev: fix build issue with optional build flag

[Nicolas Chautru]

Missing implementation for offload test with FFT.
Only build when the optional build flag RTE_BBDEV_OFFLOAD_COST
is set.

Fixes: 0acdb9866756 ("test/bbdev: add FFT operations cases")

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 app/test-bbdev/test_bbdev_perf.c | 82 ++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index 1859952901..b2e536b5e3 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -4940,6 +4940,88 @@ get_bbdev_queue_stats(uint16_t dev_id, uint16_t queue_id,
 	return 0;
 }
 
+static int
+offload_latency_test_fft(struct rte_mempool *mempool, struct test_buffers *bufs,
+		struct rte_bbdev_fft_op *ref_op, uint16_t dev_id,
+		uint16_t queue_id, const uint16_t num_to_process,
+		uint16_t burst_sz, struct test_time_stats *time_st)
+{
+	int i, dequeued, ret;
+	struct rte_bbdev_fft_op *ops_enq[MAX_BURST], *ops_deq[MAX_BURST];
+	uint64_t enq_start_time, deq_start_time;
+	uint64_t enq_sw_last_time, deq_last_time;
+	struct rte_bbdev_stats stats;
+
+	for (i = 0, dequeued = 0; dequeued < num_to_process; ++i) {
+		uint16_t enq = 0, deq = 0;
+
+		if (unlikely(num_to_process - dequeued < burst_sz))
+			burst_sz = num_to_process - dequeued;
+
+		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
+			copy_reference_fft_op(ops_enq, burst_sz, dequeued,
+					bufs->inputs,
+					bufs->hard_outputs, bufs->soft_outputs,
+					ref_op);
+
+		/* Start time meas for enqueue function offload latency */
+		enq_start_time = rte_rdtsc_precise();
+		do {
+			enq += rte_bbdev_enqueue_fft_ops(dev_id, queue_id,
+					&ops_enq[enq], burst_sz - enq);
+		} while (unlikely(burst_sz != enq));
+
+		ret = get_bbdev_queue_stats(dev_id, queue_id, &stats);
+		TEST_ASSERT_SUCCESS(ret,
+				"Failed to get stats for queue (%u) of device (%u)",
+				queue_id, dev_id);
+
+		enq_sw_last_time = rte_rdtsc_precise() - enq_start_time -
+				stats.acc_offload_cycles;
+		time_st->enq_sw_max_time = RTE_MAX(time_st->enq_sw_max_time,
+				enq_sw_last_time);
+		time_st->enq_sw_min_time = RTE_MIN(time_st->enq_sw_min_time,
+				enq_sw_last_time);
+		time_st->enq_sw_total_time += enq_sw_last_time;
+
+		time_st->enq_acc_max_time = RTE_MAX(time_st->enq_acc_max_time,
+				stats.acc_offload_cycles);
+		time_st->enq_acc_min_time = RTE_MIN(time_st->enq_acc_min_time,
+				stats.acc_offload_cycles);
+		time_st->enq_acc_total_time += stats.acc_offload_cycles;
+
+		/* give time for device to process ops */
+		rte_delay_us(WAIT_OFFLOAD_US);
+
+		/* Start time meas for dequeue function offload latency */
+		deq_start_time = rte_rdtsc_precise();
+		/* Dequeue one operation */
+		do {
+			deq += rte_bbdev_dequeue_fft_ops(dev_id, queue_id,
+					&ops_deq[deq], enq);
+		} while (unlikely(deq == 0));
+
+		deq_last_time = rte_rdtsc_precise() - deq_start_time;
+		time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
+				deq_last_time);
+		time_st->deq_min_time = RTE_MIN(time_st->deq_min_time,
+				deq_last_time);
+		time_st->deq_total_time += deq_last_time;
+
+		/* Dequeue remaining operations if needed*/
+		while (burst_sz != deq)
+			deq += rte_bbdev_dequeue_fft_ops(dev_id, queue_id,
+					&ops_deq[deq], burst_sz - deq);
+
+		rte_bbdev_fft_op_free_bulk(ops_enq, deq);
+		dequeued += deq;
+	}
+
+	return i;
+}
+
+
 static int
 offload_latency_test_dec(struct rte_mempool *mempool, struct test_buffers *bufs,
 		struct rte_bbdev_dec_op *ref_op, uint16_t dev_id,
-- 
2.37.1

[PATCH v2 3/3] test/bbdev: explicit check for allocation failure

[Nicolas Chautru]

Adding check for error on return of the
rte_bbdev_*_op_alloc_bulk calls in bbdev-test.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 app/test-bbdev/test_bbdev_perf.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index b2e536b5e3..a922d69ada 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -4958,7 +4958,8 @@ offload_latency_test_fft(struct rte_mempool *mempool, struct test_buffers *bufs,
 		if (unlikely(num_to_process - dequeued < burst_sz))
 			burst_sz = num_to_process - dequeued;
 
-		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		ret = rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
 		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
 			copy_reference_fft_op(ops_enq, burst_sz, dequeued,
 					bufs->inputs,
@@ -5040,7 +5041,8 @@ offload_latency_test_dec(struct rte_mempool *mempool, struct test_buffers *bufs,
 		if (unlikely(num_to_process - dequeued < burst_sz))
 			burst_sz = num_to_process - dequeued;
 
-		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
 		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
 			copy_reference_dec_op(ops_enq, burst_sz, dequeued,
 					bufs->inputs,
@@ -5125,7 +5127,8 @@ offload_latency_test_ldpc_dec(struct rte_mempool *mempool,
 		if (unlikely(num_to_process - dequeued < burst_sz))
 			burst_sz = num_to_process - dequeued;
 
-		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
+		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
 		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
 			copy_reference_ldpc_dec_op(ops_enq, burst_sz, dequeued,
 					bufs->inputs,
-- 
2.37.1

Re: [PATCH v2 1/3] test/bbdev: fix build issue with optional build flag

[Maxime Coquelin]

On 12/6/22 20:14, Nicolas Chautru wrote:
> Incorrect bbdev member name used in test code under
> RTE_BBDEV_OFFLOAD_COST build flag.
> 
> Fixes: 4f08028c5e24 ("bbdev: expose queue related warning and status")

You missed to cc stable@dpdk.org.
Added it now.


> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> ---
>   app/test-bbdev/test_bbdev_perf.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index b285d3f3a7..1859952901 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -4933,8 +4933,8 @@ get_bbdev_queue_stats(uint16_t dev_id, uint16_t queue_id,
>   	stats->dequeued_count = q_stats->dequeued_count;
>   	stats->enqueue_err_count = q_stats->enqueue_err_count;
>   	stats->dequeue_err_count = q_stats->dequeue_err_count;
> -	stats->enqueue_warning_count = q_stats->enqueue_warning_count;
> -	stats->dequeue_warning_count = q_stats->dequeue_warning_count;
> +	stats->enqueue_warn_count = q_stats->enqueue_warn_count;
> +	stats->dequeue_warn_count = q_stats->dequeue_warn_count;
>   	stats->acc_offload_cycles = q_stats->acc_offload_cycles;
>   
>   	return 0;

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Thanks,
Maxime

Re: [PATCH v2 2/3] test/bbdev: fix build issue with optional build flag

[Maxime Coquelin]

On 12/6/22 20:14, Nicolas Chautru wrote:
> Missing implementation for offload test with FFT.
> Only build when the optional build flag RTE_BBDEV_OFFLOAD_COST
> is set.
> 
> Fixes: 0acdb9866756 ("test/bbdev: add FFT operations cases")

Same here, adding stable@dpdk.org.

> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> ---
>   app/test-bbdev/test_bbdev_perf.c | 82 ++++++++++++++++++++++++++++++++
>   1 file changed, 82 insertions(+)
> 
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index 1859952901..b2e536b5e3 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -4940,6 +4940,88 @@ get_bbdev_queue_stats(uint16_t dev_id, uint16_t queue_id,
>   	return 0;
>   }
>   
> +static int
> +offload_latency_test_fft(struct rte_mempool *mempool, struct test_buffers *bufs,
> +		struct rte_bbdev_fft_op *ref_op, uint16_t dev_id,
> +		uint16_t queue_id, const uint16_t num_to_process,
> +		uint16_t burst_sz, struct test_time_stats *time_st)
> +{
> +	int i, dequeued, ret;
> +	struct rte_bbdev_fft_op *ops_enq[MAX_BURST], *ops_deq[MAX_BURST];
> +	uint64_t enq_start_time, deq_start_time;
> +	uint64_t enq_sw_last_time, deq_last_time;
> +	struct rte_bbdev_stats stats;
> +
> +	for (i = 0, dequeued = 0; dequeued < num_to_process; ++i) {
> +		uint16_t enq = 0, deq = 0;
> +
> +		if (unlikely(num_to_process - dequeued < burst_sz))
> +			burst_sz = num_to_process - dequeued;
> +
> +		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
> +			copy_reference_fft_op(ops_enq, burst_sz, dequeued,
> +					bufs->inputs,
> +					bufs->hard_outputs, bufs->soft_outputs,
> +					ref_op);
> +
> +		/* Start time meas for enqueue function offload latency */
> +		enq_start_time = rte_rdtsc_precise();
> +		do {
> +			enq += rte_bbdev_enqueue_fft_ops(dev_id, queue_id,
> +					&ops_enq[enq], burst_sz - enq);
> +		} while (unlikely(burst_sz != enq));
> +
> +		ret = get_bbdev_queue_stats(dev_id, queue_id, &stats);
> +		TEST_ASSERT_SUCCESS(ret,
> +				"Failed to get stats for queue (%u) of device (%u)",
> +				queue_id, dev_id);
> +
> +		enq_sw_last_time = rte_rdtsc_precise() - enq_start_time -
> +				stats.acc_offload_cycles;
> +		time_st->enq_sw_max_time = RTE_MAX(time_st->enq_sw_max_time,
> +				enq_sw_last_time);
> +		time_st->enq_sw_min_time = RTE_MIN(time_st->enq_sw_min_time,
> +				enq_sw_last_time);
> +		time_st->enq_sw_total_time += enq_sw_last_time;
> +
> +		time_st->enq_acc_max_time = RTE_MAX(time_st->enq_acc_max_time,
> +				stats.acc_offload_cycles);
> +		time_st->enq_acc_min_time = RTE_MIN(time_st->enq_acc_min_time,
> +				stats.acc_offload_cycles);
> +		time_st->enq_acc_total_time += stats.acc_offload_cycles;
> +
> +		/* give time for device to process ops */
> +		rte_delay_us(WAIT_OFFLOAD_US);
> +
> +		/* Start time meas for dequeue function offload latency */
> +		deq_start_time = rte_rdtsc_precise();
> +		/* Dequeue one operation */
> +		do {
> +			deq += rte_bbdev_dequeue_fft_ops(dev_id, queue_id,
> +					&ops_deq[deq], enq);
> +		} while (unlikely(deq == 0));
> +
> +		deq_last_time = rte_rdtsc_precise() - deq_start_time;
> +		time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
> +				deq_last_time);
> +		time_st->deq_min_time = RTE_MIN(time_st->deq_min_time,
> +				deq_last_time);
> +		time_st->deq_total_time += deq_last_time;
> +
> +		/* Dequeue remaining operations if needed*/
> +		while (burst_sz != deq)
> +			deq += rte_bbdev_dequeue_fft_ops(dev_id, queue_id,
> +					&ops_deq[deq], burst_sz - deq);
> +
> +		rte_bbdev_fft_op_free_bulk(ops_enq, deq);
> +		dequeued += deq;
> +	}
> +
> +	return i;
> +}
> +
> +
>   static int
>   offload_latency_test_dec(struct rte_mempool *mempool, struct test_buffers *bufs,
>   		struct rte_bbdev_dec_op *ref_op, uint16_t dev_id,

Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Thanks,
Maxime

Re: [PATCH v2 3/3] test/bbdev: explicit check for allocation failure

[Maxime Coquelin]

On 12/6/22 20:14, Nicolas Chautru wrote:
> Adding check for error on return of the
> rte_bbdev_*_op_alloc_bulk calls in bbdev-test.
> 
> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> ---
>   app/test-bbdev/test_bbdev_perf.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index b2e536b5e3..a922d69ada 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -4958,7 +4958,8 @@ offload_latency_test_fft(struct rte_mempool *mempool, struct test_buffers *bufs,
>   		if (unlikely(num_to_process - dequeued < burst_sz))
>   			burst_sz = num_to_process - dequeued;
>   
> -		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		ret = rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
>   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>   			copy_reference_fft_op(ops_enq, burst_sz, dequeued,
>   					bufs->inputs,
> @@ -5040,7 +5041,8 @@ offload_latency_test_dec(struct rte_mempool *mempool, struct test_buffers *bufs,
>   		if (unlikely(num_to_process - dequeued < burst_sz))
>   			burst_sz = num_to_process - dequeued;
>   
> -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
>   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>   			copy_reference_dec_op(ops_enq, burst_sz, dequeued,
>   					bufs->inputs,
> @@ -5125,7 +5127,8 @@ offload_latency_test_ldpc_dec(struct rte_mempool *mempool,
>   		if (unlikely(num_to_process - dequeued < burst_sz))
>   			burst_sz = num_to_process - dequeued;
>   
> -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq, burst_sz);
> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops", ops_enq);
>   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>   			copy_reference_ldpc_dec_op(ops_enq, burst_sz, dequeued,
>   					bufs->inputs,

You need to add Fixes tag and cc stable.

Maxime

RE: [PATCH v2 3/3] test/bbdev: explicit check for allocation failure

[Chautru, Nicolas]

Hi Maxime, 

I don’t believe this constitutes a fix, just adding more error check to be more comprehensive. Not required for stable branch really. Let me know if you disagree.

Can this be applied?

Thanks
Nic

> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> Sent: Wednesday, December 7, 2022 12:40 AM
> To: Chautru, Nicolas <nicolas.chautru@intel.com>; dev@dpdk.org
> Cc: Vargas, Hernan <hernan.vargas@intel.com>; Vipin.Varghese@amd.com
> Subject: Re: [PATCH v2 3/3] test/bbdev: explicit check for allocation failure
> 
> 
> 
> On 12/6/22 20:14, Nicolas Chautru wrote:
> > Adding check for error on return of the rte_bbdev_*_op_alloc_bulk
> > calls in bbdev-test.
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> > ---
> >   app/test-bbdev/test_bbdev_perf.c | 9 ++++++---
> >   1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/app/test-bbdev/test_bbdev_perf.c
> > b/app/test-bbdev/test_bbdev_perf.c
> > index b2e536b5e3..a922d69ada 100644
> > --- a/app/test-bbdev/test_bbdev_perf.c
> > +++ b/app/test-bbdev/test_bbdev_perf.c
> > @@ -4958,7 +4958,8 @@ offload_latency_test_fft(struct rte_mempool
> *mempool, struct test_buffers *bufs,
> >   		if (unlikely(num_to_process - dequeued < burst_sz))
> >   			burst_sz = num_to_process - dequeued;
> >
> > -		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
> > +		ret = rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq,
> burst_sz);
> > +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
> ops_enq);
> >   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
> >   			copy_reference_fft_op(ops_enq, burst_sz,
> dequeued,
> >   					bufs->inputs,
> > @@ -5040,7 +5041,8 @@ offload_latency_test_dec(struct rte_mempool
> *mempool, struct test_buffers *bufs,
> >   		if (unlikely(num_to_process - dequeued < burst_sz))
> >   			burst_sz = num_to_process - dequeued;
> >
> > -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
> burst_sz);
> > +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
> burst_sz);
> > +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
> ops_enq);
> >   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
> >   			copy_reference_dec_op(ops_enq, burst_sz,
> dequeued,
> >   					bufs->inputs,
> > @@ -5125,7 +5127,8 @@ offload_latency_test_ldpc_dec(struct
> rte_mempool *mempool,
> >   		if (unlikely(num_to_process - dequeued < burst_sz))
> >   			burst_sz = num_to_process - dequeued;
> >
> > -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
> burst_sz);
> > +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
> burst_sz);
> > +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
> ops_enq);
> >   		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
> >   			copy_reference_ldpc_dec_op(ops_enq, burst_sz,
> dequeued,
> >   					bufs->inputs,
> 
> You need to add Fixes tag and cc stable.
> 
> Maxime

Re: [PATCH v2 3/3] test/bbdev: explicit check for allocation failure

[Maxime Coquelin]

Hi Nicolas,

On 12/7/22 16:33, Chautru, Nicolas wrote:
> Hi Maxime,
> 
> I don’t believe this constitutes a fix, just adding more error check to be more comprehensive. Not required for stable branch really. Let me know if you disagree.

I think we should backport it since it constitutes a fix.
Without it, user could face a segfault, so it fixes a potential
segfault.


> Can this be applied?

Yes, with fixes tags.
I can add them while applying if you agree.

Regards,
Maxime

> Thanks
> Nic
> 
>> -----Original Message-----
>> From: Maxime Coquelin <maxime.coquelin@redhat.com>
>> Sent: Wednesday, December 7, 2022 12:40 AM
>> To: Chautru, Nicolas <nicolas.chautru@intel.com>; dev@dpdk.org
>> Cc: Vargas, Hernan <hernan.vargas@intel.com>; Vipin.Varghese@amd.com
>> Subject: Re: [PATCH v2 3/3] test/bbdev: explicit check for allocation failure
>>
>>
>>
>> On 12/6/22 20:14, Nicolas Chautru wrote:
>>> Adding check for error on return of the rte_bbdev_*_op_alloc_bulk
>>> calls in bbdev-test.
>>>
>>> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
>>> ---
>>>    app/test-bbdev/test_bbdev_perf.c | 9 ++++++---
>>>    1 file changed, 6 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/app/test-bbdev/test_bbdev_perf.c
>>> b/app/test-bbdev/test_bbdev_perf.c
>>> index b2e536b5e3..a922d69ada 100644
>>> --- a/app/test-bbdev/test_bbdev_perf.c
>>> +++ b/app/test-bbdev/test_bbdev_perf.c
>>> @@ -4958,7 +4958,8 @@ offload_latency_test_fft(struct rte_mempool
>> *mempool, struct test_buffers *bufs,
>>>    		if (unlikely(num_to_process - dequeued < burst_sz))
>>>    			burst_sz = num_to_process - dequeued;
>>>
>>> -		rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq, burst_sz);
>>> +		ret = rte_bbdev_fft_op_alloc_bulk(mempool, ops_enq,
>> burst_sz);
>>> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
>> ops_enq);
>>>    		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>>>    			copy_reference_fft_op(ops_enq, burst_sz,
>> dequeued,
>>>    					bufs->inputs,
>>> @@ -5040,7 +5041,8 @@ offload_latency_test_dec(struct rte_mempool
>> *mempool, struct test_buffers *bufs,
>>>    		if (unlikely(num_to_process - dequeued < burst_sz))
>>>    			burst_sz = num_to_process - dequeued;
>>>
>>> -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
>> burst_sz);
>>> +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
>> burst_sz);
>>> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
>> ops_enq);
>>>    		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>>>    			copy_reference_dec_op(ops_enq, burst_sz,
>> dequeued,
>>>    					bufs->inputs,
>>> @@ -5125,7 +5127,8 @@ offload_latency_test_ldpc_dec(struct
>> rte_mempool *mempool,
>>>    		if (unlikely(num_to_process - dequeued < burst_sz))
>>>    			burst_sz = num_to_process - dequeued;
>>>
>>> -		rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
>> burst_sz);
>>> +		ret = rte_bbdev_dec_op_alloc_bulk(mempool, ops_enq,
>> burst_sz);
>>> +		TEST_ASSERT_SUCCESS(ret, "Allocation failed for %d ops",
>> ops_enq);
>>>    		if (test_vector.op_type != RTE_BBDEV_OP_NONE)
>>>    			copy_reference_ldpc_dec_op(ops_enq, burst_sz,
>> dequeued,
>>>    					bufs->inputs,
>>
>> You need to add Fixes tag and cc stable.
>>
>> Maxime
>