DPDK patches and discussions
 help / color / mirror / Atom feed
* [PATCH] net/i40e: enable max frame size at port level
@ 2021-12-07  8:59 dapengx.yu
       [not found] ` <BYAPR11MB2711AB91F380189FB6AFCC52FE359@BYAPR11MB2711.namprd11.prod.outlook.com>
  2022-12-12 13:53 ` David Marchand
  0 siblings, 2 replies; 21+ messages in thread
From: dapengx.yu @ 2021-12-07  8:59 UTC (permalink / raw)
  To: Beilei Xing; +Cc: dev, Dapeng Yu, stable

From: Dapeng Yu <dapengx.yu@intel.com>

Currently max frame size is set at queue level, which makes the values
of the following counters wrong when a jumbo frame is received.

The expected value:
rx_good_bytes: 0
rx_errors: 1
rx_oversize_errors: 1

The actual value:
rx_good_bytes: 1626
rx_errors: 0
rx_oversize_errors: 0

This patch enables setting max frame size at port level, and makes the
values above right.

Cc: stable@dpdk.org

Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 41 ++++++++++++++++++++++++++++------
 1 file changed, 34 insertions(+), 7 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index c0bfff43ee..ef9b2b2414 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -386,6 +386,7 @@ static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
 				      struct rte_ether_addr *mac_addr);
 
 static int i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
+static void i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size);
 
 static int i40e_ethertype_filter_convert(
 	const struct rte_eth_ethertype_filter *input,
@@ -1709,11 +1710,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
 	 */
 	i40e_add_tx_flow_control_drop_filter(pf);
 
-	/* Set the max frame size to 0x2600 by default,
-	 * in case other drivers changed the default value.
-	 */
-	i40e_aq_set_mac_config(hw, I40E_FRAME_SIZE_MAX, TRUE, false, 0, NULL);
-
 	/* initialize RSS rule list */
 	TAILQ_INIT(&pf->rss_config_list);
 
@@ -2364,6 +2360,7 @@ i40e_dev_start(struct rte_eth_dev *dev)
 	uint32_t intr_vector = 0;
 	struct i40e_vsi *vsi;
 	uint16_t nb_rxq, nb_txq;
+	uint16_t max_frame_size;
 
 	hw->adapter_stopped = 0;
 
@@ -2502,6 +2499,9 @@ i40e_dev_start(struct rte_eth_dev *dev)
 			    "please call hierarchy_commit() "
 			    "before starting the port");
 
+	max_frame_size = dev->data->mtu + I40E_ETH_OVERHEAD;
+	i40e_set_mac_max_frame(dev, max_frame_size);
+
 	return I40E_SUCCESS;
 
 tx_err:
@@ -2848,6 +2848,9 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
 	return i40e_phy_conf_link(hw, abilities, speed, false);
 }
 
+#define CHECK_INTERVAL             100  /* 100ms */
+#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
+
 static __rte_always_inline void
 update_link_reg(struct i40e_hw *hw, struct rte_eth_link *link)
 {
@@ -2914,8 +2917,6 @@ static __rte_always_inline void
 update_link_aq(struct i40e_hw *hw, struct rte_eth_link *link,
 	bool enable_lse, int wait_to_complete)
 {
-#define CHECK_INTERVAL             100  /* 100ms */
-#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
 	uint32_t rep_cnt = MAX_REPEAT_TIME;
 	struct i40e_link_status link_status;
 	int status;
@@ -6719,6 +6720,7 @@ i40e_dev_handle_aq_msg(struct rte_eth_dev *dev)
 			if (!ret)
 				rte_eth_dev_callback_process(dev,
 					RTE_ETH_EVENT_INTR_LSC, NULL);
+
 			break;
 		default:
 			PMD_DRV_LOG(DEBUG, "Request %u is not supported yet",
@@ -12103,6 +12105,31 @@ i40e_cloud_filter_qinq_create(struct i40e_pf *pf)
 	return ret;
 }
 
+static void
+i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t rep_cnt = MAX_REPEAT_TIME;
+	struct rte_eth_link link;
+	enum i40e_status_code status;
+
+	do {
+		update_link_reg(hw, &link);
+		if (link.link_status)
+			break;
+
+		rte_delay_ms(CHECK_INTERVAL);
+	} while (--rep_cnt);
+
+	if (link.link_status) {
+		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
+		if (status != I40E_SUCCESS)
+			PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
+	} else {
+		PMD_DRV_LOG(ERR, "Set max frame size at port level not applicable on link down");
+	}
+}
+
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);
 #ifdef RTE_ETHDEV_DEBUG_RX
-- 
2.27.0


^ permalink raw reply	[flat|nested] 21+ messages in thread

end of thread, other threads:[~2023-03-06 11:05 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-07  8:59 [PATCH] net/i40e: enable max frame size at port level dapengx.yu
     [not found] ` <BYAPR11MB2711AB91F380189FB6AFCC52FE359@BYAPR11MB2711.namprd11.prod.outlook.com>
     [not found]   ` <BYAPR11MB27110434B9262C0E2BED3AD3FE3A9@BYAPR11MB2711.namprd11.prod.outlook.com>
2022-02-21  9:28     ` Zhang, Peng1X
2022-02-21 10:42     ` Zhang, Peng1X
2022-02-21 11:22       ` Zhang, Qi Z
2022-02-22  9:52         ` Kevin Traynor
2022-12-12 13:53 ` David Marchand
2022-12-12 13:58   ` David Marchand
2022-12-12 14:37     ` [PATCH] net/i40e: drop link check when configuring frame size David Marchand
2022-12-13  9:18       ` [PATCH v2] net/i40e: don't check link status on device start David Marchand
2023-01-03 14:02         ` David Marchand
2023-01-09  9:21           ` David Marchand
2023-01-13 13:33             ` David Marchand
2023-01-13 13:39               ` Zhang, Helin
2023-01-13 13:46                 ` David Marchand
2023-01-13 13:50                   ` Zhang, Helin
2023-01-13 13:53                     ` David Marchand
2023-01-16 11:02                       ` Su, Simei
2023-02-07 11:31                         ` Thomas Monjalon
2023-02-07 14:05                           ` Su, Simei
2023-03-06  6:53         ` Su, Simei
2023-03-06 11:05           ` Zhang, Qi Z

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).