From: Joshua Washington <joshwash@google.com>
To: Aman Singh <aman.deep.singh@intel.com>,
Yuying Zhang <yuying.zhang@intel.com>
Cc: dev@dpdk.org, Joshua Washington <joshwash@google.com>,
Rushil Gupta <rushilg@google.com>
Subject: [PATCH] app/testpmd: txonly multiflow port change support
Date: Tue, 11 Apr 2023 13:11:07 -0700 [thread overview]
Message-ID: <20230411201107.2798233-1-joshwash@google.com> (raw)
Google cloud routes traffic using IP addesses without the support of MAC
addresses, so changing source IP address for txonly-multi-flow can have
negative performance implications for net/gve when using testpmd. This
change adds a new flag --txonly-alter-port, which allows the alteration
of source port instead of source IP address for txonly multiflow mode.
The new flag can be tested with the following command:
dpdk-testpmd -- --forward-mode=txonly --txonly-multi-flow --txonly-alter-port --txip=<SRC>,<DST>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Rushil Gupta <rushilg@google.com>
---
app/test-pmd/parameters.c | 4 +++
app/test-pmd/testpmd.c | 6 ++++
app/test-pmd/testpmd.h | 1 +
app/test-pmd/txonly.c | 51 ++++++++++++++++++---------
doc/guides/testpmd_app_ug/run_app.rst | 6 ++++
5 files changed, 52 insertions(+), 16 deletions(-)
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 3b37809baf..a99f04b4f0 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -158,6 +158,7 @@ usage(char* progname)
" or total packet length.\n");
printf(" --multi-rx-mempool: enable multi-rx-mempool support\n");
printf(" --txonly-multi-flow: generate multiple flows in txonly mode\n");
+ printf(" --txonly-alter-port: alter source port when generating multiple flows in txonly mode. Source IP address is changed by default\n");
printf(" --tx-ip=src,dst: IP addresses in Tx-only mode\n");
printf(" --tx-udp=src[,dst]: UDP ports in Tx-only mode\n");
printf(" --eth-link-speed: force link speed.\n");
@@ -678,6 +679,7 @@ launch_args_parse(int argc, char** argv)
{ "txpkts", 1, 0, 0 },
{ "multi-rx-mempool", 0, 0, 0 },
{ "txonly-multi-flow", 0, 0, 0 },
+ { "txonly-alter-port", 0, 0, 0 },
{ "rxq-share", 2, 0, 0 },
{ "eth-link-speed", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
@@ -1307,6 +1309,8 @@ launch_args_parse(int argc, char** argv)
multi_rx_mempool = 1;
if (!strcmp(lgopts[opt_idx].name, "txonly-multi-flow"))
txonly_multi_flow = 1;
+ if (!strcmp(lgopts[opt_idx].name, "txonly-alter-port"))
+ txonly_alter_port = 1;
if (!strcmp(lgopts[opt_idx].name, "rxq-share")) {
if (optarg == NULL) {
rxq_share = UINT32_MAX;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5cb6f92523..b78bc4c26d 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -267,6 +267,12 @@ enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
uint8_t txonly_multi_flow;
/**< Whether multiple flows are generated in TXONLY mode. */
+uint8_t txonly_alter_port;
+/*
+ * Whether source port should be altered instead of IP address when generating
+ * multiple flows in TXONLY mode.
+ */
+
uint32_t tx_pkt_times_inter;
/**< Timings for send scheduling in TXONLY mode, time between bursts. */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index bdfbfd36d3..8926b51595 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -619,6 +619,7 @@ enum tx_pkt_split {
extern enum tx_pkt_split tx_pkt_split;
extern uint8_t txonly_multi_flow;
+extern uint8_t txonly_alter_port;
extern uint32_t rxq_share;
diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index b3d6873104..58b8834f08 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -56,7 +56,7 @@ uint32_t tx_ip_dst_addr = (198U << 24) | (18 << 16) | (0 << 8) | 2;
#define IP_DEFTTL 64 /* from RFC 1340. */
static struct rte_ipv4_hdr pkt_ip_hdr; /**< IP header of transmitted packets. */
-RTE_DEFINE_PER_LCORE(uint8_t, _ip_var); /**< IP address variation */
+RTE_DEFINE_PER_LCORE(uint16_t, _src_var); /**< Source address/port variation */
static struct rte_udp_hdr pkt_udp_hdr; /**< UDP header of tx packets. */
static uint64_t timestamp_mask; /**< Timestamp dynamic flag mask */
@@ -230,28 +230,47 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
copy_buf_to_pkt(eth_hdr, sizeof(*eth_hdr), pkt, 0);
copy_buf_to_pkt(&pkt_ip_hdr, sizeof(pkt_ip_hdr), pkt,
sizeof(struct rte_ether_hdr));
+ copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
+ sizeof(struct rte_ether_hdr) +
+ sizeof(struct rte_ipv4_hdr));
if (txonly_multi_flow) {
- uint8_t ip_var = RTE_PER_LCORE(_ip_var);
- struct rte_ipv4_hdr *ip_hdr;
- uint32_t addr;
+ uint16_t src_var = RTE_PER_LCORE(_src_var);
- ip_hdr = rte_pktmbuf_mtod_offset(pkt,
- struct rte_ipv4_hdr *,
- sizeof(struct rte_ether_hdr));
/*
- * Generate multiple flows by varying IP src addr. This
- * enables packets are well distributed by RSS in
+ * Generate multiple flows by varying IP source address/port.
+ * This enables packets are well distributed by RSS in
* receiver side if any and txonly mode can be a decent
* packet generator for developer's quick performance
* regression test.
*/
- addr = (tx_ip_dst_addr | (ip_var++ << 8)) + rte_lcore_id();
- ip_hdr->src_addr = rte_cpu_to_be_32(addr);
- RTE_PER_LCORE(_ip_var) = ip_var;
+ if (txonly_alter_port) {
+ struct rte_udp_hdr *udp_hdr;
+ uint16_t port;
+
+ udp_hdr = rte_pktmbuf_mtod_offset(pkt,
+ struct rte_udp_hdr *,
+ sizeof(struct rte_ether_hdr) +
+ sizeof(struct rte_ipv4_hdr));
+ /*
+ * Vary source port.
+ */
+ port = src_var++;
+ udp_hdr->src_port = rte_cpu_to_be_16(port);
+ } else {
+ struct rte_ipv4_hdr *ip_hdr;
+ uint32_t addr;
+
+ ip_hdr = rte_pktmbuf_mtod_offset(pkt,
+ struct rte_ipv4_hdr *,
+ sizeof(struct rte_ether_hdr));
+ /*
+ * Vary IP source address.
+ */
+ addr = (tx_ip_dst_addr | ((src_var++ & 0xFF) << 8)) + rte_lcore_id();
+ ip_hdr->src_addr = rte_cpu_to_be_32(addr);
+ }
+ RTE_PER_LCORE(_src_var) = src_var;
}
- copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
- sizeof(struct rte_ether_hdr) +
- sizeof(struct rte_ipv4_hdr));
if (unlikely(tx_pkt_split == TX_PKT_SPLIT_RND) || txonly_multi_flow)
update_pkt_header(pkt, pkt_len);
@@ -393,7 +412,7 @@ pkt_burst_transmit(struct fwd_stream *fs)
nb_tx = common_fwd_stream_transmit(fs, pkts_burst, nb_pkt);
if (txonly_multi_flow)
- RTE_PER_LCORE(_ip_var) -= nb_pkt - nb_tx;
+ RTE_PER_LCORE(_src_var) -= nb_pkt - nb_tx;
if (unlikely(nb_tx < nb_pkt)) {
if (verbose_level > 0 && fs->fwd_dropped == 0)
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 57b23241cf..aa2ef112a7 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -373,6 +373,12 @@ The command line options are:
Generate multiple flows in txonly mode.
+* ``--txonly-alter-port``
+
+ Alter source port when generating multiple flows in txonly mode. The default
+ behavior is to alter source IP address. This flag must be used in conjuction
+ with --txonly-multi-flow.
+
* ``--rxq-share=[X]``
Create queues in shared Rx queue mode if device supports.
--
2.40.0.577.gac1e443424-goog
next reply other threads:[~2023-04-11 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-11 20:11 Joshua Washington [this message]
2023-04-11 22:38 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230411201107.2798233-1-joshwash@google.com \
--to=joshwash@google.com \
--cc=aman.deep.singh@intel.com \
--cc=dev@dpdk.org \
--cc=rushilg@google.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).