* [PATCH] examples/ethtool: adds promiscuous mode functionality
@ 2022-05-25 5:50 Muhammad Jawad Hussain
2022-08-11 9:45 ` [PATCH v2] " Muhammad Jawad Hussain
0 siblings, 1 reply; 5+ messages in thread
From: Muhammad Jawad Hussain @ 2022-05-25 5:50 UTC (permalink / raw)
To: dev; +Cc: jawad.hussain
ethtool did not have promiscuous mode functioality previously
which is needed for viewing broadcast and multicast packets.
This patch allows user to turn on/off promiscuous mode on
each port through command line.
Signed-off-by: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
---
doc/guides/sample_app_ug/ethtool.rst | 1 +
examples/ethtool/ethtool-app/ethapp.c | 83 ++++++++++++++++++++++++++-
examples/ethtool/lib/rte_ethtool.c | 24 ++++++++
3 files changed, 106 insertions(+), 2 deletions(-)
diff --git a/doc/guides/sample_app_ug/ethtool.rst b/doc/guides/sample_app_ug/ethtool.rst
index 159e9e0639..6edd9940b8 100644
--- a/doc/guides/sample_app_ug/ethtool.rst
+++ b/doc/guides/sample_app_ug/ethtool.rst
@@ -54,6 +54,7 @@ they do as follows:
* ``regs``: Dump port register(s) to file
* ``ringparam``: Get/set ring parameters
* ``rxmode``: Toggle port Rx mode
+* ``set promisc``: Enable/Disable promiscuous mode on ports
* ``stop``: Stop port
* ``validate``: Check that given MAC address is valid unicast address
* ``vlan``: Add/remove VLAN id
diff --git a/examples/ethtool/ethtool-app/ethapp.c b/examples/ethtool/ethtool-app/ethapp.c
index 78e86534e8..d6e121bd5d 100644
--- a/examples/ethtool/ethtool-app/ethapp.c
+++ b/examples/ethtool/ethtool-app/ethapp.c
@@ -13,8 +13,16 @@
#include "ethapp.h"
#define EEPROM_DUMP_CHUNKSIZE 1024
-
-
+typedef uint16_t portid_t;
+
+/* *** PROMISC_MODE *** */
+struct cmd_set_promisc_mode_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t promisc;
+ cmdline_fixed_string_t port_all; /* valid if "allports" argument == 1 */
+ uint16_t port_num; /* valid if "allports" argument == 0 */
+ cmdline_fixed_string_t mode;
+};
struct pcmd_get_params {
cmdline_fixed_string_t cmd;
};
@@ -133,6 +141,22 @@ cmdline_parse_token_string_t pcmd_vlan_token_mode =
cmdline_parse_token_num_t pcmd_vlan_token_vid =
TOKEN_NUM_INITIALIZER(struct pcmd_vlan_params, vid, RTE_UINT16);
+/* promisc mode */
+
+cmdline_parse_token_string_t cmd_setpromisc_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, set, "set");
+cmdline_parse_token_string_t cmd_setpromisc_promisc =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, promisc,
+ "promisc");
+cmdline_parse_token_string_t cmd_setpromisc_portall =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, port_all,
+ "all");
+cmdline_parse_token_num_t cmd_setpromisc_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_promisc_mode_result, port_num,
+ RTE_UINT16);
+cmdline_parse_token_string_t cmd_setpromisc_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, mode,
+ "on#off");
static void
pcmd_quit_callback(__rte_unused void *ptr_params,
@@ -142,6 +166,34 @@ pcmd_quit_callback(__rte_unused void *ptr_params,
cmdline_quit(ctx);
}
+static void pcmd_set_promisc_mode_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ void *allports)
+{
+ struct cmd_set_promisc_mode_result *res = parsed_result;
+ int enable;
+ int ret;
+ portid_t i;
+ if (!strcmp(res->mode, "on"))
+ enable = 1;
+ else
+ enable = 0;
+
+ /* all ports */
+ if (allports) {
+ RTE_ETH_FOREACH_DEV(i)
+ ret = eth_set_promisc_mode(i, enable);
+ } else {
+ ret = eth_set_promisc_mode(res->port_num, enable);
+ }
+ if (ret) {
+ if (enable)
+ printf("Promisc mode Enabled\n");
+ else
+ printf("Promisc mode Disabled\n");
+ } else
+ printf("Error while updating promisc mode");
+}
static void
pcmd_drvinfo_callback(__rte_unused void *ptr_params,
@@ -869,6 +921,31 @@ cmdline_parse_inst_t pcmd_vlan = {
},
};
+cmdline_parse_inst_t cmd_set_promisc_mode_all = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)1,
+ .help_str = "set promisc all <on|off>\n Set promisc mode for all ports",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portall,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_set_promisc_mode_one = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)0,
+ .help_str = "set promisc <port_id> <on|off>\n Set promisc mode on port_id",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portnum,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_drvinfo,
@@ -886,6 +963,8 @@ cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_ringparam,
(cmdline_parse_inst_t *)&pcmd_ringparam_set,
(cmdline_parse_inst_t *)&pcmd_rxmode,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_one,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_all,
(cmdline_parse_inst_t *)&pcmd_stop,
(cmdline_parse_inst_t *)&pcmd_validate,
(cmdline_parse_inst_t *)&pcmd_vlan,
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index ffaad96498..2fb47471cb 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -18,6 +18,30 @@
#define PKTPOOL_CACHE 32
+int
+eth_set_promisc_mode(uint16_t port, int enable)
+{
+ int ret;
+
+
+ if (enable)
+ ret = rte_eth_promiscuous_enable(port);
+ else
+ ret = rte_eth_promiscuous_disable(port);
+
+ if (ret != 0) {
+ fprintf(stderr,
+ "Error during %s promiscuous mode for port %u: %s\n",
+ enable ? "enabling" : "disabling",
+ port, rte_strerror(-ret));
+ return 0;
+ } else
+ return 1;
+}
+
+
+
+
int
rte_ethtool_get_drvinfo(uint16_t port_id, struct ethtool_drvinfo *drvinfo)
{
--
2.32.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] examples/ethtool: adds promiscuous mode functionality
2022-05-25 5:50 [PATCH] examples/ethtool: adds promiscuous mode functionality Muhammad Jawad Hussain
@ 2022-08-11 9:45 ` Muhammad Jawad Hussain
2022-08-22 5:31 ` Muhammad Jawad Hussain
2023-07-03 22:08 ` Stephen Hemminger
0 siblings, 2 replies; 5+ messages in thread
From: Muhammad Jawad Hussain @ 2022-08-11 9:45 UTC (permalink / raw)
To: dev; +Cc: jawad.hussain
ethtool did not have promiscuous mode functioality previously
which is needed for viewing broadcast and multicast packets.
This patch allows user to turn on/off promiscuous mode on
each port through command line.
Signed-off-by: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
---
doc/guides/sample_app_ug/ethtool.rst | 1 +
examples/ethtool/ethtool-app/ethapp.c | 79 ++++++++++++++++++++++++++-
examples/ethtool/lib/rte_ethtool.c | 24 ++++++++
examples/ethtool/lib/rte_ethtool.h | 2 +
4 files changed, 104 insertions(+), 2 deletions(-)
diff --git a/doc/guides/sample_app_ug/ethtool.rst b/doc/guides/sample_app_ug/ethtool.rst
index 159e9e0639..6edd9940b8 100644
--- a/doc/guides/sample_app_ug/ethtool.rst
+++ b/doc/guides/sample_app_ug/ethtool.rst
@@ -54,6 +54,7 @@ they do as follows:
* ``regs``: Dump port register(s) to file
* ``ringparam``: Get/set ring parameters
* ``rxmode``: Toggle port Rx mode
+* ``set promisc``: Enable/Disable promiscuous mode on ports
* ``stop``: Stop port
* ``validate``: Check that given MAC address is valid unicast address
* ``vlan``: Add/remove VLAN id
diff --git a/examples/ethtool/ethtool-app/ethapp.c b/examples/ethtool/ethtool-app/ethapp.c
index 78e86534e8..f89e4c4cf0 100644
--- a/examples/ethtool/ethtool-app/ethapp.c
+++ b/examples/ethtool/ethtool-app/ethapp.c
@@ -13,8 +13,16 @@
#include "ethapp.h"
#define EEPROM_DUMP_CHUNKSIZE 1024
-
-
+typedef uint16_t portid_t;
+
+/* *** PROMISC_MODE *** */
+struct cmd_set_promisc_mode_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t promisc;
+ cmdline_fixed_string_t port_all; /* valid if "allports" argument == 1 */
+ uint16_t port_num; /* valid if "allports" argument == 0 */
+ cmdline_fixed_string_t mode;
+};
struct pcmd_get_params {
cmdline_fixed_string_t cmd;
};
@@ -133,6 +141,22 @@ cmdline_parse_token_string_t pcmd_vlan_token_mode =
cmdline_parse_token_num_t pcmd_vlan_token_vid =
TOKEN_NUM_INITIALIZER(struct pcmd_vlan_params, vid, RTE_UINT16);
+/* promisc mode */
+
+cmdline_parse_token_string_t cmd_setpromisc_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, set, "set");
+cmdline_parse_token_string_t cmd_setpromisc_promisc =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, promisc,
+ "promisc");
+cmdline_parse_token_string_t cmd_setpromisc_portall =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, port_all,
+ "all");
+cmdline_parse_token_num_t cmd_setpromisc_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_promisc_mode_result, port_num,
+ RTE_UINT16);
+cmdline_parse_token_string_t cmd_setpromisc_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, mode,
+ "on#off");
static void
pcmd_quit_callback(__rte_unused void *ptr_params,
@@ -142,6 +166,30 @@ pcmd_quit_callback(__rte_unused void *ptr_params,
cmdline_quit(ctx);
}
+static void pcmd_set_promisc_mode_parsed(void *ptr_params,
+ __rte_unused struct cmdline *ctx,
+ void *allports)
+{
+ struct cmd_set_promisc_mode_result *res = ptr_params;
+ int enable;
+ portid_t i;
+ if (!strcmp(res->mode, "on"))
+ enable = 1;
+ else
+ enable = 0;
+
+ /* all ports */
+ if (allports) {
+ RTE_ETH_FOREACH_DEV(i)
+ eth_set_promisc_mode(i, enable);
+ } else {
+ eth_set_promisc_mode(res->port_num, enable);
+ }
+ if (enable)
+ printf("Promisc mode Enabled\n");
+ else
+ printf("Promisc mode Disabled\n");
+}
static void
pcmd_drvinfo_callback(__rte_unused void *ptr_params,
@@ -869,6 +917,31 @@ cmdline_parse_inst_t pcmd_vlan = {
},
};
+cmdline_parse_inst_t cmd_set_promisc_mode_all = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)1,
+ .help_str = "set promisc all <on|off>\n Set promisc mode for all ports",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portall,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_set_promisc_mode_one = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)0,
+ .help_str = "set promisc <port_id> <on|off>\n Set promisc mode on port_id",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portnum,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_drvinfo,
@@ -886,6 +959,8 @@ cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_ringparam,
(cmdline_parse_inst_t *)&pcmd_ringparam_set,
(cmdline_parse_inst_t *)&pcmd_rxmode,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_one,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_all,
(cmdline_parse_inst_t *)&pcmd_stop,
(cmdline_parse_inst_t *)&pcmd_validate,
(cmdline_parse_inst_t *)&pcmd_vlan,
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index ffaad96498..2fb47471cb 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -18,6 +18,30 @@
#define PKTPOOL_CACHE 32
+int
+eth_set_promisc_mode(uint16_t port, int enable)
+{
+ int ret;
+
+
+ if (enable)
+ ret = rte_eth_promiscuous_enable(port);
+ else
+ ret = rte_eth_promiscuous_disable(port);
+
+ if (ret != 0) {
+ fprintf(stderr,
+ "Error during %s promiscuous mode for port %u: %s\n",
+ enable ? "enabling" : "disabling",
+ port, rte_strerror(-ret));
+ return 0;
+ } else
+ return 1;
+}
+
+
+
+
int
rte_ethtool_get_drvinfo(uint16_t port_id, struct ethtool_drvinfo *drvinfo)
{
diff --git a/examples/ethtool/lib/rte_ethtool.h b/examples/ethtool/lib/rte_ethtool.h
index d27e0102b1..2b19907b4d 100644
--- a/examples/ethtool/lib/rte_ethtool.h
+++ b/examples/ethtool/lib/rte_ethtool.h
@@ -408,6 +408,8 @@ int rte_ethtool_get_ringparam(uint16_t port_id,
int rte_ethtool_set_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param);
+int
+eth_set_promisc_mode(uint16_t port, int enable);
#ifdef __cplusplus
}
--
2.32.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] examples/ethtool: adds promiscuous mode functionality
2022-08-11 9:45 ` [PATCH v2] " Muhammad Jawad Hussain
@ 2022-08-22 5:31 ` Muhammad Jawad Hussain
2023-07-03 22:08 ` Stephen Hemminger
1 sibling, 0 replies; 5+ messages in thread
From: Muhammad Jawad Hussain @ 2022-08-22 5:31 UTC (permalink / raw)
To: dev
[-- Attachment #1: Type: text/plain, Size: 7452 bytes --]
Hi,
The following test is failing on my patch and its is not related to my
changes, can u please re-run it.
test:
ci/iol-x86_64-unit-testing
Thanks
Regards,
Jawad
On Thu, Aug 11, 2022 at 2:45 PM Muhammad Jawad Hussain <
jawad.hussain@emumba.com> wrote:
> ethtool did not have promiscuous mode functioality previously
> which is needed for viewing broadcast and multicast packets.
> This patch allows user to turn on/off promiscuous mode on
> each port through command line.
>
> Signed-off-by: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
> ---
> doc/guides/sample_app_ug/ethtool.rst | 1 +
> examples/ethtool/ethtool-app/ethapp.c | 79 ++++++++++++++++++++++++++-
> examples/ethtool/lib/rte_ethtool.c | 24 ++++++++
> examples/ethtool/lib/rte_ethtool.h | 2 +
> 4 files changed, 104 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/sample_app_ug/ethtool.rst
> b/doc/guides/sample_app_ug/ethtool.rst
> index 159e9e0639..6edd9940b8 100644
> --- a/doc/guides/sample_app_ug/ethtool.rst
> +++ b/doc/guides/sample_app_ug/ethtool.rst
> @@ -54,6 +54,7 @@ they do as follows:
> * ``regs``: Dump port register(s) to file
> * ``ringparam``: Get/set ring parameters
> * ``rxmode``: Toggle port Rx mode
> +* ``set promisc``: Enable/Disable promiscuous mode on ports
> * ``stop``: Stop port
> * ``validate``: Check that given MAC address is valid unicast address
> * ``vlan``: Add/remove VLAN id
> diff --git a/examples/ethtool/ethtool-app/ethapp.c
> b/examples/ethtool/ethtool-app/ethapp.c
> index 78e86534e8..f89e4c4cf0 100644
> --- a/examples/ethtool/ethtool-app/ethapp.c
> +++ b/examples/ethtool/ethtool-app/ethapp.c
> @@ -13,8 +13,16 @@
> #include "ethapp.h"
>
> #define EEPROM_DUMP_CHUNKSIZE 1024
> -
> -
> +typedef uint16_t portid_t;
> +
> +/* *** PROMISC_MODE *** */
> +struct cmd_set_promisc_mode_result {
> + cmdline_fixed_string_t set;
> + cmdline_fixed_string_t promisc;
> + cmdline_fixed_string_t port_all; /* valid if "allports" argument
> == 1 */
> + uint16_t port_num; /* valid if "allports" argument
> == 0 */
> + cmdline_fixed_string_t mode;
> +};
> struct pcmd_get_params {
> cmdline_fixed_string_t cmd;
> };
> @@ -133,6 +141,22 @@ cmdline_parse_token_string_t pcmd_vlan_token_mode =
> cmdline_parse_token_num_t pcmd_vlan_token_vid =
> TOKEN_NUM_INITIALIZER(struct pcmd_vlan_params, vid, RTE_UINT16);
>
> +/* promisc mode */
> +
> +cmdline_parse_token_string_t cmd_setpromisc_set =
> + TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, set,
> "set");
> +cmdline_parse_token_string_t cmd_setpromisc_promisc =
> + TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result,
> promisc,
> + "promisc");
> +cmdline_parse_token_string_t cmd_setpromisc_portall =
> + TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result,
> port_all,
> + "all");
> +cmdline_parse_token_num_t cmd_setpromisc_portnum =
> + TOKEN_NUM_INITIALIZER(struct cmd_set_promisc_mode_result, port_num,
> + RTE_UINT16);
> +cmdline_parse_token_string_t cmd_setpromisc_mode =
> + TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, mode,
> + "on#off");
>
> static void
> pcmd_quit_callback(__rte_unused void *ptr_params,
> @@ -142,6 +166,30 @@ pcmd_quit_callback(__rte_unused void *ptr_params,
> cmdline_quit(ctx);
> }
>
> +static void pcmd_set_promisc_mode_parsed(void *ptr_params,
> + __rte_unused struct cmdline *ctx,
> + void *allports)
> +{
> + struct cmd_set_promisc_mode_result *res = ptr_params;
> + int enable;
> + portid_t i;
> + if (!strcmp(res->mode, "on"))
> + enable = 1;
> + else
> + enable = 0;
> +
> + /* all ports */
> + if (allports) {
> + RTE_ETH_FOREACH_DEV(i)
> + eth_set_promisc_mode(i, enable);
> + } else {
> + eth_set_promisc_mode(res->port_num, enable);
> + }
> + if (enable)
> + printf("Promisc mode Enabled\n");
> + else
> + printf("Promisc mode Disabled\n");
> +}
>
> static void
> pcmd_drvinfo_callback(__rte_unused void *ptr_params,
> @@ -869,6 +917,31 @@ cmdline_parse_inst_t pcmd_vlan = {
> },
> };
>
> +cmdline_parse_inst_t cmd_set_promisc_mode_all = {
> + .f = pcmd_set_promisc_mode_parsed,
> + .data = (void *)1,
> + .help_str = "set promisc all <on|off>\n Set promisc mode for
> all ports",
> + .tokens = {
> + (void *)&cmd_setpromisc_set,
> + (void *)&cmd_setpromisc_promisc,
> + (void *)&cmd_setpromisc_portall,
> + (void *)&cmd_setpromisc_mode,
> + NULL,
> + },
> +};
> +
> +cmdline_parse_inst_t cmd_set_promisc_mode_one = {
> + .f = pcmd_set_promisc_mode_parsed,
> + .data = (void *)0,
> + .help_str = "set promisc <port_id> <on|off>\n Set promisc mode
> on port_id",
> + .tokens = {
> + (void *)&cmd_setpromisc_set,
> + (void *)&cmd_setpromisc_promisc,
> + (void *)&cmd_setpromisc_portnum,
> + (void *)&cmd_setpromisc_mode,
> + NULL,
> + },
> +};
>
> cmdline_parse_ctx_t list_prompt_commands[] = {
> (cmdline_parse_inst_t *)&pcmd_drvinfo,
> @@ -886,6 +959,8 @@ cmdline_parse_ctx_t list_prompt_commands[] = {
> (cmdline_parse_inst_t *)&pcmd_ringparam,
> (cmdline_parse_inst_t *)&pcmd_ringparam_set,
> (cmdline_parse_inst_t *)&pcmd_rxmode,
> + (cmdline_parse_inst_t *)&cmd_set_promisc_mode_one,
> + (cmdline_parse_inst_t *)&cmd_set_promisc_mode_all,
> (cmdline_parse_inst_t *)&pcmd_stop,
> (cmdline_parse_inst_t *)&pcmd_validate,
> (cmdline_parse_inst_t *)&pcmd_vlan,
> diff --git a/examples/ethtool/lib/rte_ethtool.c
> b/examples/ethtool/lib/rte_ethtool.c
> index ffaad96498..2fb47471cb 100644
> --- a/examples/ethtool/lib/rte_ethtool.c
> +++ b/examples/ethtool/lib/rte_ethtool.c
> @@ -18,6 +18,30 @@
> #define PKTPOOL_CACHE 32
>
>
> +int
> +eth_set_promisc_mode(uint16_t port, int enable)
> +{
> + int ret;
> +
> +
> + if (enable)
> + ret = rte_eth_promiscuous_enable(port);
> + else
> + ret = rte_eth_promiscuous_disable(port);
> +
> + if (ret != 0) {
> + fprintf(stderr,
> + "Error during %s promiscuous mode for port %u:
> %s\n",
> + enable ? "enabling" : "disabling",
> + port, rte_strerror(-ret));
> + return 0;
> + } else
> + return 1;
> +}
> +
> +
> +
> +
> int
> rte_ethtool_get_drvinfo(uint16_t port_id, struct ethtool_drvinfo *drvinfo)
> {
> diff --git a/examples/ethtool/lib/rte_ethtool.h
> b/examples/ethtool/lib/rte_ethtool.h
> index d27e0102b1..2b19907b4d 100644
> --- a/examples/ethtool/lib/rte_ethtool.h
> +++ b/examples/ethtool/lib/rte_ethtool.h
> @@ -408,6 +408,8 @@ int rte_ethtool_get_ringparam(uint16_t port_id,
> int rte_ethtool_set_ringparam(uint16_t port_id,
> struct ethtool_ringparam *ring_param);
>
> +int
> +eth_set_promisc_mode(uint16_t port, int enable);
>
> #ifdef __cplusplus
> }
> --
> 2.32.0
>
>
[-- Attachment #2: Type: text/html, Size: 9298 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] examples/ethtool: adds promiscuous mode functionality
2022-08-11 9:45 ` [PATCH v2] " Muhammad Jawad Hussain
2022-08-22 5:31 ` Muhammad Jawad Hussain
@ 2023-07-03 22:08 ` Stephen Hemminger
1 sibling, 0 replies; 5+ messages in thread
From: Stephen Hemminger @ 2023-07-03 22:08 UTC (permalink / raw)
To: Muhammad Jawad Hussain; +Cc: dev
On Thu, 11 Aug 2022 14:45:08 +0500
Muhammad Jawad Hussain <jawad.hussain@emumba.com> wrote:
>
>
> +int
> +eth_set_promisc_mode(uint16_t port, int enable)
> +{
> + int ret;
> +
> +
> + if (enable)
> + ret = rte_eth_promiscuous_enable(port);
> + else
> + ret = rte_eth_promiscuous_disable(port);
> +
> + if (ret != 0) {
> + fprintf(stderr,
> + "Error during %s promiscuous mode for port %u: %s\n",
> + enable ? "enabling" : "disabling",
> + port, rte_strerror(-ret));
> + return 0;
> + } else
> + return 1;
> +}
> +
> +
> +
> +
Some minor comments:
1. The naming convention in ethtool should be followed.
This should be named: rte_ethtool_set_promisc_mode
2. Indentation is wrong for the "return 0" part
3. Lots of useless extra blank lines, one will do fine.
Overall, the idea is fine, but almost no one cares about the ethtool example.
That is why no one reviewed or acked it.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] examples/ethtool: adds promiscuous mode functionality
@ 2022-05-29 14:28 Muhammad Jawad Hussain
0 siblings, 0 replies; 5+ messages in thread
From: Muhammad Jawad Hussain @ 2022-05-29 14:28 UTC (permalink / raw)
To: dev; +Cc: jawad.hussain
ethtool did not have promiscuous mode functioality previously
which is needed for viewing broadcast and multicast packets.
This patch allows user to turn on/off promiscuous mode on
each port through command line.
Signed-off-by: Muhammad Jawad Hussain <jawad.hussain@emumba.com>
---
doc/guides/sample_app_ug/ethtool.rst | 1 +
examples/ethtool/ethtool-app/ethapp.c | 79 ++++++++++++++++++++++++++-
examples/ethtool/lib/rte_ethtool.c | 24 ++++++++
examples/ethtool/lib/rte_ethtool.h | 2 +
4 files changed, 104 insertions(+), 2 deletions(-)
diff --git a/doc/guides/sample_app_ug/ethtool.rst b/doc/guides/sample_app_ug/ethtool.rst
index 159e9e0639..6edd9940b8 100644
--- a/doc/guides/sample_app_ug/ethtool.rst
+++ b/doc/guides/sample_app_ug/ethtool.rst
@@ -54,6 +54,7 @@ they do as follows:
* ``regs``: Dump port register(s) to file
* ``ringparam``: Get/set ring parameters
* ``rxmode``: Toggle port Rx mode
+* ``set promisc``: Enable/Disable promiscuous mode on ports
* ``stop``: Stop port
* ``validate``: Check that given MAC address is valid unicast address
* ``vlan``: Add/remove VLAN id
diff --git a/examples/ethtool/ethtool-app/ethapp.c b/examples/ethtool/ethtool-app/ethapp.c
index 78e86534e8..f89e4c4cf0 100644
--- a/examples/ethtool/ethtool-app/ethapp.c
+++ b/examples/ethtool/ethtool-app/ethapp.c
@@ -13,8 +13,16 @@
#include "ethapp.h"
#define EEPROM_DUMP_CHUNKSIZE 1024
-
-
+typedef uint16_t portid_t;
+
+/* *** PROMISC_MODE *** */
+struct cmd_set_promisc_mode_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t promisc;
+ cmdline_fixed_string_t port_all; /* valid if "allports" argument == 1 */
+ uint16_t port_num; /* valid if "allports" argument == 0 */
+ cmdline_fixed_string_t mode;
+};
struct pcmd_get_params {
cmdline_fixed_string_t cmd;
};
@@ -133,6 +141,22 @@ cmdline_parse_token_string_t pcmd_vlan_token_mode =
cmdline_parse_token_num_t pcmd_vlan_token_vid =
TOKEN_NUM_INITIALIZER(struct pcmd_vlan_params, vid, RTE_UINT16);
+/* promisc mode */
+
+cmdline_parse_token_string_t cmd_setpromisc_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, set, "set");
+cmdline_parse_token_string_t cmd_setpromisc_promisc =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, promisc,
+ "promisc");
+cmdline_parse_token_string_t cmd_setpromisc_portall =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, port_all,
+ "all");
+cmdline_parse_token_num_t cmd_setpromisc_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_promisc_mode_result, port_num,
+ RTE_UINT16);
+cmdline_parse_token_string_t cmd_setpromisc_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_promisc_mode_result, mode,
+ "on#off");
static void
pcmd_quit_callback(__rte_unused void *ptr_params,
@@ -142,6 +166,30 @@ pcmd_quit_callback(__rte_unused void *ptr_params,
cmdline_quit(ctx);
}
+static void pcmd_set_promisc_mode_parsed(void *ptr_params,
+ __rte_unused struct cmdline *ctx,
+ void *allports)
+{
+ struct cmd_set_promisc_mode_result *res = ptr_params;
+ int enable;
+ portid_t i;
+ if (!strcmp(res->mode, "on"))
+ enable = 1;
+ else
+ enable = 0;
+
+ /* all ports */
+ if (allports) {
+ RTE_ETH_FOREACH_DEV(i)
+ eth_set_promisc_mode(i, enable);
+ } else {
+ eth_set_promisc_mode(res->port_num, enable);
+ }
+ if (enable)
+ printf("Promisc mode Enabled\n");
+ else
+ printf("Promisc mode Disabled\n");
+}
static void
pcmd_drvinfo_callback(__rte_unused void *ptr_params,
@@ -869,6 +917,31 @@ cmdline_parse_inst_t pcmd_vlan = {
},
};
+cmdline_parse_inst_t cmd_set_promisc_mode_all = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)1,
+ .help_str = "set promisc all <on|off>\n Set promisc mode for all ports",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portall,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
+
+cmdline_parse_inst_t cmd_set_promisc_mode_one = {
+ .f = pcmd_set_promisc_mode_parsed,
+ .data = (void *)0,
+ .help_str = "set promisc <port_id> <on|off>\n Set promisc mode on port_id",
+ .tokens = {
+ (void *)&cmd_setpromisc_set,
+ (void *)&cmd_setpromisc_promisc,
+ (void *)&cmd_setpromisc_portnum,
+ (void *)&cmd_setpromisc_mode,
+ NULL,
+ },
+};
cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_drvinfo,
@@ -886,6 +959,8 @@ cmdline_parse_ctx_t list_prompt_commands[] = {
(cmdline_parse_inst_t *)&pcmd_ringparam,
(cmdline_parse_inst_t *)&pcmd_ringparam_set,
(cmdline_parse_inst_t *)&pcmd_rxmode,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_one,
+ (cmdline_parse_inst_t *)&cmd_set_promisc_mode_all,
(cmdline_parse_inst_t *)&pcmd_stop,
(cmdline_parse_inst_t *)&pcmd_validate,
(cmdline_parse_inst_t *)&pcmd_vlan,
diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index ffaad96498..2fb47471cb 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -18,6 +18,30 @@
#define PKTPOOL_CACHE 32
+int
+eth_set_promisc_mode(uint16_t port, int enable)
+{
+ int ret;
+
+
+ if (enable)
+ ret = rte_eth_promiscuous_enable(port);
+ else
+ ret = rte_eth_promiscuous_disable(port);
+
+ if (ret != 0) {
+ fprintf(stderr,
+ "Error during %s promiscuous mode for port %u: %s\n",
+ enable ? "enabling" : "disabling",
+ port, rte_strerror(-ret));
+ return 0;
+ } else
+ return 1;
+}
+
+
+
+
int
rte_ethtool_get_drvinfo(uint16_t port_id, struct ethtool_drvinfo *drvinfo)
{
diff --git a/examples/ethtool/lib/rte_ethtool.h b/examples/ethtool/lib/rte_ethtool.h
index d27e0102b1..2b19907b4d 100644
--- a/examples/ethtool/lib/rte_ethtool.h
+++ b/examples/ethtool/lib/rte_ethtool.h
@@ -408,6 +408,8 @@ int rte_ethtool_get_ringparam(uint16_t port_id,
int rte_ethtool_set_ringparam(uint16_t port_id,
struct ethtool_ringparam *ring_param);
+int
+eth_set_promisc_mode(uint16_t port, int enable);
#ifdef __cplusplus
}
--
2.32.0
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-07-03 22:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-25 5:50 [PATCH] examples/ethtool: adds promiscuous mode functionality Muhammad Jawad Hussain
2022-08-11 9:45 ` [PATCH v2] " Muhammad Jawad Hussain
2022-08-22 5:31 ` Muhammad Jawad Hussain
2023-07-03 22:08 ` Stephen Hemminger
2022-05-29 14:28 Muhammad Jawad Hussain
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).