From: Chaoyong He <chaoyong.he@corigine.com>
To: dev@dpdk.org
Cc: oss-drivers@corigine.com, Long Wu <long.wu@corigine.com>,
James Hershaw <james.hershaw@corigine.com>,
Chaoyong He <chaoyong.he@corigine.com>
Subject: [PATCH v3 3/8] net/bonding: modify interface comment format
Date: Sun, 8 Oct 2023 09:50:36 +0800 [thread overview]
Message-ID: <20231008015041.1551165-4-chaoyong.he@corigine.com> (raw)
In-Reply-To: <20231008015041.1551165-1-chaoyong.he@corigine.com>
From: Long Wu <long.wu@corigine.com>
Most of the previous interface comment format does not meet the
current standards and were not uniform.
Modify them to meet current standards.
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
---
drivers/net/bonding/eth_bond_8023ad_private.h | 52 +++---
drivers/net/bonding/rte_eth_bond.h | 150 +++++++++++-------
drivers/net/bonding/rte_eth_bond_8023ad.h | 76 ++++++---
drivers/net/bonding/rte_eth_bond_alb.h | 34 ++--
4 files changed, 199 insertions(+), 113 deletions(-)
diff --git a/drivers/net/bonding/eth_bond_8023ad_private.h b/drivers/net/bonding/eth_bond_8023ad_private.h
index ab7d15f81a..29ee8700c3 100644
--- a/drivers/net/bonding/eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/eth_bond_8023ad_private.h
@@ -196,10 +196,13 @@ struct bond_dev_private;
*
* Set mode 4 configuration of bonding interface.
*
- * @pre Bonding interface must be stopped.
+ * @pre
+ * Bonding interface must be stopped.
*
- * @param dev Bonding interface
- * @param conf new configuration. If NULL set default configuration.
+ * @param dev
+ * Bonding interface
+ * @param conf
+ * new configuration. If NULL set default configuration.
*/
void
bond_mode_8023ad_setup(struct rte_eth_dev *dev,
@@ -210,9 +213,11 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
*
* Enables 802.1AX mode and all active members on bonding interface.
*
- * @param dev Bonding interface
+ * @param dev
+ * Bonding interface
+ *
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
bond_mode_8023ad_enable(struct rte_eth_dev *dev);
@@ -222,7 +227,8 @@ bond_mode_8023ad_enable(struct rte_eth_dev *dev);
*
* Disables 802.1AX mode of the bonding interface and members.
*
- * @param dev Bonding interface
+ * @param dev
+ * Bonding interface
* @return
* 0 on success, negative value otherwise.
*/
@@ -232,7 +238,8 @@ int bond_mode_8023ad_disable(struct rte_eth_dev *dev);
* @internal
*
* Starts 802.3AX state machines management logic.
- * @param dev Bonding interface
+ * @param dev
+ * Bonding interface
* @return
* 0 if machines was started, 1 if machines was already running,
* negative value otherwise.
@@ -244,7 +251,8 @@ bond_mode_8023ad_start(struct rte_eth_dev *dev);
* @internal
*
* Stops 802.3AX state machines management logic.
- * @param dev Bonding interface
+ * @param dev
+ * Bonding interface
* @return
* 0 if this call stopped state machines, -ENOENT if alarm was not set.
*/
@@ -255,9 +263,12 @@ bond_mode_8023ad_stop(struct rte_eth_dev *dev);
* @internal
*
* Passes given slow packet to state machines management logic.
- * @param internals Bonding device private data.
- * @param member_id Member port id.
- * @param slot_pkt Slow packet.
+ * @param internals
+ * Bonding device private data.
+ * @param member_id
+ * Member port id.
+ * @param slot_pkt
+ * Slow packet.
*/
void
bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
@@ -268,11 +279,13 @@ bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
*
* Appends given member used member
*
- * @param dev Bonding interface.
- * @param port_id Member port ID to be added
+ * @param dev
+ * Bonding interface.
+ * @param port_id
+ * Member port ID to be added
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
void
bond_mode_8023ad_activate_member(struct rte_eth_dev *dev, uint16_t port_id);
@@ -282,18 +295,21 @@ bond_mode_8023ad_activate_member(struct rte_eth_dev *dev, uint16_t port_id);
*
* Denitializes and removes given member from 802.1AX mode.
*
- * @param dev Bonding interface.
- * @param member_num Position of member in active_members array
+ * @param dev
+ * Bonding interface.
+ * @param member_num
+ * Position of member in active_members array
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
bond_mode_8023ad_deactivate_member(struct rte_eth_dev *dev, uint16_t member_pos);
/**
* Updates state when MAC was changed on bonding device or one of its members.
- * @param bond_dev Bonding device
+ * @param bond_dev
+ * Bonding device
*/
void
bond_mode_8023ad_mac_address_update(struct rte_eth_dev *bond_dev);
diff --git a/drivers/net/bonding/rte_eth_bond.h b/drivers/net/bonding/rte_eth_bond.h
index 6be5e46deb..28aa341d2f 100644
--- a/drivers/net/bonding/rte_eth_bond.h
+++ b/drivers/net/bonding/rte_eth_bond.h
@@ -95,12 +95,15 @@ extern "C" {
/**
* Create a bonding rte_eth_dev device
*
- * @param name Name of new link bonding device.
- * @param mode Mode to initialize bonding device in.
- * @param socket_id Socket Id on which to allocate eth_dev resources.
+ * @param name
+ * Name of new link bonding device.
+ * @param mode
+ * Mode to initialize bonding device in.
+ * @param socket_id
+ * Socket Id on which to allocate eth_dev resources.
*
* @return
- * Port Id of created rte_eth_dev on success, negative value otherwise
+ * Port Id of created rte_eth_dev on success, negative value otherwise
*/
int
rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id);
@@ -108,10 +111,11 @@ rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id);
/**
* Free a bonding rte_eth_dev device
*
- * @param name Name of the link bonding device.
+ * @param name
+ * Name of the link bonding device.
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
int
rte_eth_bond_free(const char *name);
@@ -119,11 +123,13 @@ rte_eth_bond_free(const char *name);
/**
* Add a rte_eth_dev device as a member to the bonding device
*
- * @param bonding_port_id Port ID of bonding device.
- * @param member_port_id Port ID of member device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param member_port_id
+ * Port ID of member device.
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
__rte_experimental
int
@@ -132,11 +138,13 @@ rte_eth_bond_member_add(uint16_t bonding_port_id, uint16_t member_port_id);
/**
* Remove a member rte_eth_dev device from the bonding device
*
- * @param bonding_port_id Port ID of bonding device.
- * @param member_port_id Port ID of member device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param member_port_id
+ * Port ID of member device.
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
__rte_experimental
int
@@ -145,11 +153,13 @@ rte_eth_bond_member_remove(uint16_t bonding_port_id, uint16_t member_port_id);
/**
* Set link bonding mode of bonding device
*
- * @param bonding_port_id Port ID of bonding device.
- * @param mode Bonding mode to set
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param mode
+ * Bonding mode to set
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
int
rte_eth_bond_mode_set(uint16_t bonding_port_id, uint8_t mode);
@@ -157,10 +167,11 @@ rte_eth_bond_mode_set(uint16_t bonding_port_id, uint8_t mode);
/**
* Get link bonding mode of bonding device
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * link bonding mode on success, negative value otherwise
+ * link bonding mode on success, negative value otherwise
*/
int
rte_eth_bond_mode_get(uint16_t bonding_port_id);
@@ -168,11 +179,13 @@ rte_eth_bond_mode_get(uint16_t bonding_port_id);
/**
* Set member rte_eth_dev as primary member of bonding device
*
- * @param bonding_port_id Port ID of bonding device.
- * @param member_port_id Port ID of member device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param member_port_id
+ * Port ID of member device.
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
int
rte_eth_bond_primary_set(uint16_t bonding_port_id, uint16_t member_port_id);
@@ -180,10 +193,11 @@ rte_eth_bond_primary_set(uint16_t bonding_port_id, uint16_t member_port_id);
/**
* Get primary member of bonding device
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * Port Id of primary member on success, -1 on failure
+ * Port Id of primary member on success, -1 on failure
*/
int
rte_eth_bond_primary_get(uint16_t bonding_port_id);
@@ -191,13 +205,16 @@ rte_eth_bond_primary_get(uint16_t bonding_port_id);
/**
* Populate an array with list of the members port id's of the bonding device
*
- * @param bonding_port_id Port ID of bonding eth_dev to interrogate
- * @param members Array to be populated with the current active members
- * @param len Length of members array
+ * @param bonding_port_id
+ * Port ID of bonding eth_dev to interrogate
+ * @param members
+ * Array to be populated with the current active members
+ * @param len
+ * Length of members array
*
* @return
- * Number of members associated with bonding device on success,
- * negative value otherwise
+ * Number of members associated with bonding device on success,
+ * negative value otherwise
*/
__rte_experimental
int
@@ -208,13 +225,16 @@ rte_eth_bond_members_get(uint16_t bonding_port_id, uint16_t members[],
* Populate an array with list of the active members port id's of the bonding
* device.
*
- * @param bonding_port_id Port ID of bonding eth_dev to interrogate
- * @param members Array to be populated with the current active members
- * @param len Length of members array
+ * @param bonding_port_id
+ * Port ID of bonding eth_dev to interrogate
+ * @param members
+ * Array to be populated with the current active members
+ * @param len
+ * Length of members array
*
* @return
- * Number of active members associated with bonding device on success,
- * negative value otherwise
+ * Number of active members associated with bonding device on success,
+ * negative value otherwise
*/
__rte_experimental
int
@@ -224,12 +244,13 @@ rte_eth_bond_active_members_get(uint16_t bonding_port_id, uint16_t members[],
/**
* Set explicit MAC address to use on bonding device and it's members.
*
- * @param bonding_port_id Port ID of bonding device.
- * @param mac_addr MAC Address to use on bonding device overriding
- * members MAC addresses
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param mac_addr
+ * MAC Address to use on bonding device overriding members MAC addresses
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
int
rte_eth_bond_mac_address_set(uint16_t bonding_port_id,
@@ -239,10 +260,11 @@ rte_eth_bond_mac_address_set(uint16_t bonding_port_id,
* Reset bonding device to use MAC from primary member on bonding device and it's
* members.
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * 0 on success, negative value otherwise
+ * 0 on success, negative value otherwise
*/
int
rte_eth_bond_mac_address_reset(uint16_t bonding_port_id);
@@ -252,11 +274,13 @@ rte_eth_bond_mac_address_reset(uint16_t bonding_port_id);
* balance mode, this parameter is otherwise ignored in other modes of
* operation.
*
- * @param bonding_port_id Port ID of bonding device.
- * @param policy Balance mode transmission policy.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param policy
+ * Balance mode transmission policy.
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
rte_eth_bond_xmit_policy_set(uint16_t bonding_port_id, uint8_t policy);
@@ -264,10 +288,11 @@ rte_eth_bond_xmit_policy_set(uint16_t bonding_port_id, uint8_t policy);
/**
* Get the transmit policy set on bonding device for balance mode operation
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * Balance transmit policy on success, negative value otherwise.
+ * Balance transmit policy on success, negative value otherwise.
*/
int
rte_eth_bond_xmit_policy_get(uint16_t bonding_port_id);
@@ -276,11 +301,13 @@ rte_eth_bond_xmit_policy_get(uint16_t bonding_port_id);
* Set the link monitoring frequency (in ms) for monitoring the link status of
* member devices
*
- * @param bonding_port_id Port ID of bonding device.
- * @param internal_ms Monitoring interval in milliseconds
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param internal_ms
+ * Monitoring interval in milliseconds
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
@@ -290,10 +317,11 @@ rte_eth_bond_link_monitoring_set(uint16_t bonding_port_id, uint32_t internal_ms)
* Get the current link monitoring frequency (in ms) for monitoring of the link
* status of member devices
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * Monitoring interval on success, negative value otherwise.
+ * Monitoring interval on success, negative value otherwise.
*/
int
rte_eth_bond_link_monitoring_get(uint16_t bonding_port_id);
@@ -303,11 +331,13 @@ rte_eth_bond_link_monitoring_get(uint16_t bonding_port_id);
* Set the period in milliseconds for delaying the disabling of a bonding link
* when the link down status has been detected
*
- * @param bonding_port_id Port ID of bonding device.
- * @param delay_ms Delay period in milliseconds.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param delay_ms
+ * Delay period in milliseconds.
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
rte_eth_bond_link_down_prop_delay_set(uint16_t bonding_port_id,
@@ -317,10 +347,11 @@ rte_eth_bond_link_down_prop_delay_set(uint16_t bonding_port_id,
* Get the period in milliseconds set for delaying the disabling of a bonding
* link when the link down status has been detected
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * Delay period on success, negative value otherwise.
+ * Delay period on success, negative value otherwise.
*/
int
rte_eth_bond_link_down_prop_delay_get(uint16_t bonding_port_id);
@@ -329,11 +360,13 @@ rte_eth_bond_link_down_prop_delay_get(uint16_t bonding_port_id);
* Set the period in milliseconds for delaying the enabling of a bonding link
* when the link up status has been detected
*
- * @param bonding_port_id Port ID of bonding device.
- * @param delay_ms Delay period in milliseconds.
+ * @param bonding_port_id
+ * Port ID of bonding device.
+ * @param delay_ms
+ * Delay period in milliseconds.
*
* @return
- * 0 on success, negative value otherwise.
+ * 0 on success, negative value otherwise.
*/
int
rte_eth_bond_link_up_prop_delay_set(uint16_t bonding_port_id,
@@ -343,10 +376,11 @@ rte_eth_bond_link_up_prop_delay_set(uint16_t bonding_port_id,
* Get the period in milliseconds set for delaying the enabling of a bonding
* link when the link up status has been detected
*
- * @param bonding_port_id Port ID of bonding device.
+ * @param bonding_port_id
+ * Port ID of bonding device.
*
* @return
- * Delay period on success, negative value otherwise.
+ * Delay period on success, negative value otherwise.
*/
int
rte_eth_bond_link_up_prop_delay_get(uint16_t bonding_port_id);
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.h b/drivers/net/bonding/rte_eth_bond_8023ad.h
index 4c280c7565..4936d7fc0c 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.h
@@ -155,8 +155,10 @@ struct rte_eth_bond_8023ad_member_info {
*
* Function returns current configuration of 802.3AX mode.
*
- * @param port_id Bonding device id
- * @param conf Pointer to timeout structure.
+ * @param port_id
+ * Bonding device id
+ * @param conf
+ * Pointer to timeout structure.
*
* @return
* 0 - if ok
@@ -171,8 +173,10 @@ rte_eth_bond_8023ad_conf_get(uint16_t port_id,
*
* Function set new configuration of 802.3AX mode.
*
- * @param port_id Bonding device id
- * @param conf Configuration, if NULL set default configuration.
+ * @param port_id
+ * Bonding device id
+ * @param conf
+ * Configuration, if NULL set default configuration.
* @return
* 0 - if ok
* -EINVAL if configuration is invalid.
@@ -186,8 +190,10 @@ rte_eth_bond_8023ad_setup(uint16_t port_id,
*
* Function returns current state of given member device.
*
- * @param member_id Port id of valid member.
- * @param conf buffer for configuration
+ * @param member_id
+ * Port id of valid member.
+ * @param conf
+ * buffer for configuration
* @return
* 0 - if ok
* -EINVAL if conf is NULL or member id is invalid (not a member of given
@@ -201,9 +207,12 @@ rte_eth_bond_8023ad_member_info(uint16_t port_id, uint16_t member_id,
/**
* Configure a member port to start collecting.
*
- * @param port_id Bonding device id
- * @param member_id Port id of valid member.
- * @param enabled Non-zero when collection enabled.
+ * @param port_id
+ * Bonding device id
+ * @param member_id
+ * Port id of valid member.
+ * @param enabled
+ * Non-zero when collection enabled.
* @return
* 0 - if ok
* -EINVAL if member is not valid.
@@ -215,8 +224,10 @@ rte_eth_bond_8023ad_ext_collect(uint16_t port_id, uint16_t member_id,
/**
* Get COLLECTING flag from member port actor state.
*
- * @param port_id Bonding device id
- * @param member_id Port id of valid member.
+ * @param port_id
+ * Bonding device id
+ * @param member_id
+ * Port id of valid member.
* @return
* 0 - if not set
* 1 - if set
@@ -228,9 +239,12 @@ rte_eth_bond_8023ad_ext_collect_get(uint16_t port_id, uint16_t member_id);
/**
* Configure a member port to start distributing.
*
- * @param port_id Bonding device id
- * @param member_id Port id of valid member.
- * @param enabled Non-zero when distribution enabled.
+ * @param port_id
+ * Bonding device id
+ * @param member_id
+ * Port id of valid member.
+ * @param enabled
+ * Non-zero when distribution enabled.
* @return
* 0 - if ok
* -EINVAL if member is not valid.
@@ -242,8 +256,10 @@ rte_eth_bond_8023ad_ext_distrib(uint16_t port_id, uint16_t member_id,
/**
* Get DISTRIBUTING flag from member port actor state.
*
- * @param port_id Bonding device id
- * @param member_id Port id of valid member.
+ * @param port_id
+ * Bonding device id
+ * @param member_id
+ * Port id of valid member.
* @return
* 0 - if not set
* 1 - if set
@@ -256,9 +272,12 @@ rte_eth_bond_8023ad_ext_distrib_get(uint16_t port_id, uint16_t member_id);
* LACPDU transmit path for external 802.3ad state machine. Caller retains
* ownership of the packet on failure.
*
- * @param port_id Bonding device id
- * @param member_id Port ID of valid member device.
- * @param lacp_pkt mbuf containing LACPDU.
+ * @param port_id
+ * Bonding device id
+ * @param member_id
+ * Port ID of valid member device.
+ * @param lacp_pkt
+ * mbuf containing LACPDU.
*
* @return
* 0 on success, negative value otherwise.
@@ -284,7 +303,8 @@ rte_eth_bond_8023ad_ext_slowtx(uint16_t port_id, uint16_t member_id,
*
* Bonding port must be stopped to change this configuration.
*
- * @param port_id Bonding device id
+ * @param port_id
+ * Bonding device id
*
* @return
* 0 on success, negative value otherwise.
@@ -299,9 +319,11 @@ rte_eth_bond_8023ad_dedicated_queues_enable(uint16_t port_id);
*
* Bonding port must be stopped to change this configuration.
*
- * @see rte_eth_bond_8023ad_slow_pkt_hw_filter_enable
+ * @see
+ * rte_eth_bond_8023ad_slow_pkt_hw_filter_enable
*
- * @param port_id Bonding device id
+ * @param port_id
+ * Bonding device id
* @return
* 0 on success, negative value otherwise.
*
@@ -309,9 +331,11 @@ rte_eth_bond_8023ad_dedicated_queues_enable(uint16_t port_id);
int
rte_eth_bond_8023ad_dedicated_queues_disable(uint16_t port_id);
-/*
+/**
* Get aggregator mode for 8023ad
- * @param port_id Bonding device id
+ *
+ * @param port_id
+ * Bonding device id
*
* @return
* aggregator mode on success, negative value otherwise
@@ -321,7 +345,9 @@ rte_eth_bond_8023ad_agg_selection_get(uint16_t port_id);
/**
* Set aggregator mode for 8023ad
- * @param port_id Bonding device id
+ * @param port_id
+ * Bonding device id
+ *
* @return
* 0 on success, negative value otherwise
*/
diff --git a/drivers/net/bonding/rte_eth_bond_alb.h b/drivers/net/bonding/rte_eth_bond_alb.h
index f51c355d36..3cf0d87750 100644
--- a/drivers/net/bonding/rte_eth_bond_alb.h
+++ b/drivers/net/bonding/rte_eth_bond_alb.h
@@ -63,9 +63,12 @@ bond_mode_alb_enable(struct rte_eth_dev *bond_dev);
* forwarded to application without changes. If it is ARP reply, client table
* is updated.
*
- * @param eth_h ETH header of received packet.
- * @param offset Vlan header offset.
- * @param internals Bonding data.
+ * @param eth_h
+ * ETH header of received packet.
+ * @param offset
+ * Vlan header offset.
+ * @param internals
+ * Bonding data.
*/
void
bond_mode_alb_arp_recv(struct rte_ether_hdr *eth_h, uint16_t offset,
@@ -77,12 +80,15 @@ bond_mode_alb_arp_recv(struct rte_ether_hdr *eth_h, uint16_t offset,
* If it is ARP Reply, it is send on member stored in client table for that
* connection. On Reply function also updates data in client table.
*
- * @param eth_h ETH header of transmitted packet.
- * @param offset Vlan header offset.
- * @param internals Bonding data.
+ * @param eth_h
+ * ETH header of transmitted packet.
+ * @param offset
+ * Vlan header offset.
+ * @param internals
+ * Bonding data.
*
* @return
- * Index of member on which packet should be sent.
+ * Index of member on which packet should be sent.
*/
uint16_t
bond_mode_alb_arp_xmit(struct rte_ether_hdr *eth_h, uint16_t offset,
@@ -91,12 +97,15 @@ bond_mode_alb_arp_xmit(struct rte_ether_hdr *eth_h, uint16_t offset,
/**
* Function fills packet with ARP data from client_info.
*
- * @param client_info Data of client to which packet is sent.
- * @param pkt Pointer to packet which is sent.
- * @param internals Bonding data.
+ * @param client_info
+ * Data of client to which packet is sent.
+ * @param pkt
+ * Pointer to packet which is sent.
+ * @param internals
+ * Bonding data.
*
* @return
- * Index of member on which packet should be sent.
+ * Index of member on which packet should be sent.
*/
uint16_t
bond_mode_alb_arp_upd(struct client_data *client_info,
@@ -105,7 +114,8 @@ bond_mode_alb_arp_upd(struct client_data *client_info,
/**
* Function updates member indexes of active connections.
*
- * @param bond_dev Pointer to bonding device struct.
+ * @param bond_dev
+ * Pointer to bonding device struct.
*/
void
bond_mode_alb_client_list_upd(struct rte_eth_dev *bond_dev);
--
2.39.1
next prev parent reply other threads:[~2023-10-08 1:51 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-05 2:40 [PATCH 0/8] Enhance the bond framework to support offload Chaoyong He
2023-10-05 2:40 ` [PATCH 1/8] ethdev: add member notification for bonding port Chaoyong He
2023-10-05 2:40 ` [PATCH 2/8] ethdev: add API to get hardware creation of " Chaoyong He
2023-10-05 2:40 ` [PATCH 3/8] net/bonding: modify interface comment format Chaoyong He
2023-10-05 2:40 ` [PATCH 4/8] net/bonding: add bonding port arguments Chaoyong He
2023-10-05 2:40 ` [PATCH 5/8] net/bonding: support add port by data name Chaoyong He
2023-10-05 2:40 ` [PATCH 6/8] net/bonding: create new rte flow header file Chaoyong He
2023-10-05 2:40 ` [PATCH 7/8] net/bonding: support checking valid bonding port ID Chaoyong He
2023-10-05 2:40 ` [PATCH 8/8] net/bonding: add commands for bonding port notification Chaoyong He
2023-10-07 1:34 ` [PATCH v2 0/8] Enhance the bond framework to support offload Chaoyong He
2023-10-07 1:34 ` [PATCH v2 1/8] ethdev: add member notification for bonding port Chaoyong He
2023-10-07 15:49 ` Stephen Hemminger
2023-10-08 1:37 ` Chaoyong He
2023-10-07 1:34 ` [PATCH v2 2/8] ethdev: add API to get hardware creation of " Chaoyong He
2023-10-07 1:34 ` [PATCH v2 3/8] net/bonding: modify interface comment format Chaoyong He
2023-10-07 1:34 ` [PATCH v2 4/8] net/bonding: add bonding port arguments Chaoyong He
2023-10-07 1:34 ` [PATCH v2 5/8] net/bonding: support add port by data name Chaoyong He
2023-10-07 1:34 ` [PATCH v2 6/8] net/bonding: create new rte flow header file Chaoyong He
2023-10-07 1:34 ` [PATCH v2 7/8] net/bonding: support checking valid bonding port ID Chaoyong He
2023-10-07 1:34 ` [PATCH v2 8/8] net/bonding: add commands for bonding port notification Chaoyong He
2023-10-08 1:50 ` [PATCH v3 0/8] Enhance the bond framework to support offload Chaoyong He
2023-10-08 1:50 ` [PATCH v3 1/8] ethdev: add member notification for bonding port Chaoyong He
2023-10-08 2:49 ` lihuisong (C)
2023-10-09 3:11 ` 回复: " Long Wu
2023-10-17 8:27 ` lihuisong (C)
2023-10-18 2:16 ` Chaoyong He
2023-10-08 1:50 ` [PATCH v3 2/8] ethdev: add API to get hardware creation of " Chaoyong He
2023-10-08 1:50 ` Chaoyong He [this message]
2023-10-08 1:50 ` [PATCH v3 4/8] net/bonding: add bonding port arguments Chaoyong He
2023-10-08 1:50 ` [PATCH v3 5/8] net/bonding: support add port by data name Chaoyong He
2023-10-08 1:50 ` [PATCH v3 6/8] net/bonding: create new rte flow header file Chaoyong He
2023-10-08 1:50 ` [PATCH v3 7/8] net/bonding: support checking valid bonding port ID Chaoyong He
2023-10-17 8:33 ` lihuisong (C)
2023-10-17 9:25 ` Chaoyong He
2023-10-17 11:34 ` lihuisong (C)
2023-10-18 1:53 ` Chaoyong He
2023-10-17 15:56 ` Stephen Hemminger
2023-10-08 1:50 ` [PATCH v3 8/8] net/bonding: add commands for bonding port notification Chaoyong He
2023-10-13 2:22 ` [PATCH v3 0/8] Enhance the bond framework to support offload Chaoyong He
2023-10-13 12:53 ` Ferruh Yigit
2023-10-18 7:48 ` [PATCH v4 0/6] " Chaoyong He
2023-10-18 7:48 ` [PATCH v4 1/6] ethdev: add member notification for bonding port Chaoyong He
2023-10-18 7:48 ` [PATCH v4 2/6] ethdev: add API to get hardware creation of " Chaoyong He
2023-10-18 7:48 ` [PATCH v4 3/6] net/bonding: add bonding port arguments Chaoyong He
2023-10-18 7:48 ` [PATCH v4 4/6] net/bonding: support add port by data name Chaoyong He
2023-10-18 7:48 ` [PATCH v4 5/6] net/bonding: support checking valid bonding port ID Chaoyong He
2023-10-18 7:48 ` [PATCH v4 6/6] net/bonding: add commands for bonding port notification Chaoyong He
2023-11-15 16:01 ` [PATCH v4 0/6] Enhance the bond framework to support offload Ferruh Yigit
2023-11-16 1:45 ` Chaoyong He
2023-12-26 2:37 ` [PATCH v5 00/14] " Chaoyong He
2023-12-26 2:37 ` [PATCH v5 01/14] ethdev: add member notification for bonding port Chaoyong He
2023-12-26 2:37 ` [PATCH v5 02/14] ethdev: add API to get firmware creation of " Chaoyong He
2023-12-26 2:37 ` [PATCH v5 03/14] net/bonding: add bonding port arguments Chaoyong He
2023-12-26 2:37 ` [PATCH v5 04/14] net/bonding: support add port by data name Chaoyong He
2023-12-26 2:37 ` [PATCH v5 05/14] net/bonding: support checking valid bonding port ID Chaoyong He
2023-12-26 2:37 ` [PATCH v5 06/14] net/bonding: add commands for bonding port notification Chaoyong He
2023-12-26 2:37 ` [PATCH v5 07/14] net/bonding: create new rte flow header file Chaoyong He
2023-12-26 2:37 ` [PATCH v5 08/14] net/nfp: add bond firmware creation initialization Chaoyong He
2023-12-26 2:37 ` [PATCH v5 09/14] net/nfp: reset bond configuration of firmware Chaoyong He
2023-12-26 2:37 ` [PATCH v5 10/14] net/nfp: handle link event of bond firmware creation Chaoyong He
2023-12-26 2:37 ` [PATCH v5 11/14] net/nfp: support bond member notification Chaoyong He
2023-12-26 2:37 ` [PATCH v5 12/14] net/nfp: handle bond packets from firmware Chaoyong He
2023-12-26 2:37 ` [PATCH v5 13/14] net/nfp: support getting bond firmware creation Chaoyong He
2023-12-26 2:37 ` [PATCH v5 14/14] net/nfp: support offloading bond-flow Chaoyong He
2023-12-26 7:28 ` [PATCH v6 00/14] Enhance the bond framework to support offload Chaoyong He
2023-12-26 7:28 ` [PATCH v6 01/14] ethdev: add member notification for bonding port Chaoyong He
2023-12-26 7:28 ` [PATCH v6 02/14] ethdev: add API to get firmware creation of " Chaoyong He
2023-12-26 7:28 ` [PATCH v6 03/14] net/bonding: add bonding port arguments Chaoyong He
2023-12-26 7:28 ` [PATCH v6 04/14] net/bonding: support add port by data name Chaoyong He
2023-12-26 7:28 ` [PATCH v6 05/14] net/bonding: support checking valid bonding port ID Chaoyong He
2023-12-26 7:28 ` [PATCH v6 06/14] net/bonding: add commands for bonding port notification Chaoyong He
2023-12-26 7:28 ` [PATCH v6 07/14] net/bonding: create new rte flow header file Chaoyong He
2023-12-26 7:28 ` [PATCH v6 08/14] net/nfp: add bond firmware creation initialization Chaoyong He
2023-12-26 7:28 ` [PATCH v6 09/14] net/nfp: reset bond configuration of firmware Chaoyong He
2023-12-26 7:28 ` [PATCH v6 10/14] net/nfp: handle link event of bond firmware creation Chaoyong He
2023-12-26 7:28 ` [PATCH v6 11/14] net/nfp: support bond member notification Chaoyong He
2023-12-26 7:28 ` [PATCH v6 12/14] net/nfp: handle bond packets from firmware Chaoyong He
2023-12-26 7:28 ` [PATCH v6 13/14] net/nfp: support getting bond firmware creation Chaoyong He
2023-12-26 7:28 ` [PATCH v6 14/14] net/nfp: support offloading bond-flow Chaoyong He
2024-09-22 22:30 ` [PATCH v6 00/14] Enhance the bond framework to support offload Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231008015041.1551165-4-chaoyong.he@corigine.com \
--to=chaoyong.he@corigine.com \
--cc=dev@dpdk.org \
--cc=james.hershaw@corigine.com \
--cc=long.wu@corigine.com \
--cc=oss-drivers@corigine.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).