* [v4] net/af_xdp: enable uds_path instead of use_cni
@ 2023-12-13 12:24 Maryam Tahhan
2023-12-15 9:55 ` Loftus, Ciara
0 siblings, 1 reply; 3+ messages in thread
From: Maryam Tahhan @ 2023-12-13 12:24 UTC (permalink / raw)
To: ferruh.yigit, stephen, lihuisong, fengchengwen, liuyonglong,
shibin.koikkara.reeny, ciara.loftus
Cc: dev, Maryam Tahhan
With the original 'use_cni' implementation, (using a
hardcoded socket rather than a configurable one),
if a DPDK pod is requesting multiple net devices
and these devices are from different pools, then
the container attempts to mount all the netdev UDSes
in the pod as /tmp/afxdp.sock. Which means that at best
only 1 netdev will handshake correctly with the AF_XDP
DP. This patch addresses this by making the socket
parameter configurable using a new vdev param called
'uds_path' and removing the previous 'use_cni' param.
This patch also fixes incorrect references to the
AF_XDP DP as CNI and updates the documentation with a
working example. This change has been tested with the
AF_XDP DP PR 81, with both single and multiple interfaces.
v4:
* Rename af_xdp_cni.rst to af_xdp_dp.rst
* Removed all incorrect references to CNI throughout af_xdp
PMD file.
* Fixed Typos in af_xdp_dp.rst
v3:
* Remove `use_cni` vdev argument as it's no longer needed.
* Update incorrect CNI references for the AF_XDP DP in the
documentation.
* Update the documentation to run a simple example with the
AF_XDP DP plugin in K8s.
v2:
* Rename sock_path to uds_path.
* Update documentation to reflect when CAP_BPF is needed.
* Fix testpmd arguments in the provided example for Pods.
* Use AF_XDP API to update the xskmap entry.
Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
---
doc/guides/howto/af_xdp_cni.rst | 253 -------------------------
doc/guides/howto/af_xdp_dp.rst | 278 ++++++++++++++++++++++++++++
doc/guides/howto/index.rst | 2 +-
drivers/net/af_xdp/rte_eth_af_xdp.c | 100 +++++-----
4 files changed, 328 insertions(+), 305 deletions(-)
delete mode 100644 doc/guides/howto/af_xdp_cni.rst
create mode 100644 doc/guides/howto/af_xdp_dp.rst
diff --git a/doc/guides/howto/af_xdp_cni.rst b/doc/guides/howto/af_xdp_cni.rst
deleted file mode 100644
index a1a6d5b99c..0000000000
--- a/doc/guides/howto/af_xdp_cni.rst
+++ /dev/null
@@ -1,253 +0,0 @@
-.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2023 Intel Corporation.
-
-Using a CNI with the AF_XDP driver
-==================================
-
-Introduction
-------------
-
-CNI, the Container Network Interface, is a technology for configuring
-container network interfaces
-and which can be used to setup Kubernetes networking.
-AF_XDP is a Linux socket Address Family that enables an XDP program
-to redirect packets to a memory buffer in userspace.
-
-This document explains how to enable the `AF_XDP Plugin for Kubernetes`_ within
-a DPDK application using the :doc:`../nics/af_xdp` to connect and use these technologies.
-
-.. _AF_XDP Plugin for Kubernetes: https://github.com/intel/afxdp-plugins-for-kubernetes
-
-
-Background
-----------
-
-The standard :doc:`../nics/af_xdp` initialization process involves loading an eBPF program
-onto the kernel netdev to be used by the PMD.
-This operation requires root or escalated Linux privileges
-and thus prevents the PMD from working in an unprivileged container.
-The AF_XDP CNI plugin handles this situation
-by providing a device plugin that performs the program loading.
-
-At a technical level the CNI opens a Unix Domain Socket and listens for a client
-to make requests over that socket.
-A DPDK application acting as a client connects and initiates a configuration "handshake".
-The client then receives a file descriptor which points to the XSKMAP
-associated with the loaded eBPF program.
-The XSKMAP is a BPF map of AF_XDP sockets (XSK).
-The client can then proceed with creating an AF_XDP socket
-and inserting that socket into the XSKMAP pointed to by the descriptor.
-
-The EAL vdev argument ``use_cni`` is used to indicate that the user wishes
-to run the PMD in unprivileged mode and to receive the XSKMAP file descriptor
-from the CNI.
-When this flag is set,
-the ``XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD`` libbpf flag
-should be used when creating the socket
-to instruct libbpf not to load the default libbpf program on the netdev.
-Instead the loading is handled by the CNI.
-
-.. note::
-
- The Unix Domain Socket file path appear in the end user is "/tmp/afxdp.sock".
-
-
-Prerequisites
--------------
-
-Docker and container prerequisites:
-
-* Set up the device plugin
- as described in the instructions for `AF_XDP Plugin for Kubernetes`_.
-
-* The Docker image should contain the libbpf and libxdp libraries,
- which are dependencies for AF_XDP,
- and should include support for the ``ethtool`` command.
-
-* The Pod should have enabled the capabilities ``CAP_NET_RAW`` and ``CAP_BPF``
- for AF_XDP along with support for hugepages.
-
-* Increase locked memory limit so containers have enough memory for packet buffers.
- For example:
-
- .. code-block:: console
-
- cat << EOF | sudo tee /etc/systemd/system/containerd.service.d/limits.conf
- [Service]
- LimitMEMLOCK=infinity
- EOF
-
-* dpdk-testpmd application should have AF_XDP feature enabled.
-
- For further information see the docs for the: :doc:`../../nics/af_xdp`.
-
-
-Example
--------
-
-Howto run dpdk-testpmd with CNI plugin:
-
-* Clone the CNI plugin
-
- .. code-block:: console
-
- # git clone https://github.com/intel/afxdp-plugins-for-kubernetes.git
-
-* Build the CNI plugin
-
- .. code-block:: console
-
- # cd afxdp-plugins-for-kubernetes/
- # make build
-
- .. note::
-
- CNI plugin has a dependence on the config.json.
-
- Sample Config.json
-
- .. code-block:: json
-
- {
- "logLevel":"debug",
- "logFile":"afxdp-dp-e2e.log",
- "pools":[
- {
- "name":"e2e",
- "mode":"primary",
- "timeout":30,
- "ethtoolCmds" : ["-L -device- combined 1"],
- "devices":[
- {
- "name":"ens785f0"
- }
- ]
- }
- ]
- }
-
- For further reference please use the `config.json`_
-
- .. _config.json: https://github.com/intel/afxdp-plugins-for-kubernetes/blob/v0.0.2/test/e2e/config.json
-
-* Create the Network Attachment definition
-
- .. code-block:: console
-
- # kubectl create -f nad.yaml
-
- Sample nad.yml
-
- .. code-block:: yaml
-
- apiVersion: "k8s.cni.cncf.io/v1"
- kind: NetworkAttachmentDefinition
- metadata:
- name: afxdp-e2e-test
- annotations:
- k8s.v1.cni.cncf.io/resourceName: afxdp/e2e
- spec:
- config: '{
- "cniVersion": "0.3.0",
- "type": "afxdp",
- "mode": "cdq",
- "logFile": "afxdp-cni-e2e.log",
- "logLevel": "debug",
- "ipam": {
- "type": "host-local",
- "subnet": "192.168.1.0/24",
- "rangeStart": "192.168.1.200",
- "rangeEnd": "192.168.1.216",
- "routes": [
- { "dst": "0.0.0.0/0" }
- ],
- "gateway": "192.168.1.1"
- }
- }'
-
- For further reference please use the `nad.yaml`_
-
- .. _nad.yaml: https://github.com/intel/afxdp-plugins-for-kubernetes/blob/v0.0.2/test/e2e/nad.yaml
-
-* Build the Docker image
-
- .. code-block:: console
-
- # docker build -t afxdp-e2e-test -f Dockerfile .
-
- Sample Dockerfile:
-
- .. code-block:: console
-
- FROM ubuntu:20.04
- RUN apt-get update -y
- RUN apt install build-essential libelf-dev -y
- RUN apt-get install iproute2 acl -y
- RUN apt install python3-pyelftools ethtool -y
- RUN apt install libnuma-dev libjansson-dev libpcap-dev net-tools -y
- RUN apt-get install clang llvm -y
- COPY ./libbpf<version>.tar.gz /tmp
- RUN cd /tmp && tar -xvmf libbpf<version>.tar.gz && cd libbpf/src && make install
- COPY ./libxdp<version>.tar.gz /tmp
- RUN cd /tmp && tar -xvmf libxdp<version>.tar.gz && cd libxdp && make install
-
- .. note::
-
- All the files that need to COPY-ed should be in the same directory as the Dockerfile
-
-* Run the Pod
-
- .. code-block:: console
-
- # kubectl create -f pod.yaml
-
- Sample pod.yaml:
-
- .. code-block:: yaml
-
- apiVersion: v1
- kind: Pod
- metadata:
- name: afxdp-e2e-test
- annotations:
- k8s.v1.cni.cncf.io/networks: afxdp-e2e-test
- spec:
- containers:
- - name: afxdp
- image: afxdp-e2e-test:latest
- imagePullPolicy: Never
- env:
- - name: LD_LIBRARY_PATH
- value: /usr/lib64/:/usr/local/lib/
- command: ["tail", "-f", "/dev/null"]
- securityContext:
- capabilities:
- add:
- - CAP_NET_RAW
- - CAP_BPF
- resources:
- requests:
- hugepages-2Mi: 2Gi
- memory: 2Gi
- afxdp/e2e: '1'
- limits:
- hugepages-2Mi: 2Gi
- memory: 2Gi
- afxdp/e2e: '1'
-
- For further reference please use the `pod.yaml`_
-
- .. _pod.yaml: https://github.com/intel/afxdp-plugins-for-kubernetes/blob/v0.0.2/test/e2e/pod-1c1d.yaml
-
-* Run DPDK with a command like the following:
-
- .. code-block:: console
-
- kubectl exec -i <Pod name> --container <containers name> -- \
- /<Path>/dpdk-testpmd -l 0,1 --no-pci \
- --vdev=net_af_xdp0,use_cni=1,iface=<interface name> \
- -- --no-mlockall --in-memory
-
-For further reference please use the `e2e`_ test case in `AF_XDP Plugin for Kubernetes`_
-
- .. _e2e: https://github.com/intel/afxdp-plugins-for-kubernetes/tree/v0.0.2/test/e2e
diff --git a/doc/guides/howto/af_xdp_dp.rst b/doc/guides/howto/af_xdp_dp.rst
new file mode 100644
index 0000000000..7e31b758cc
--- /dev/null
+++ b/doc/guides/howto/af_xdp_dp.rst
@@ -0,0 +1,278 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2023 Intel Corporation.
+
+Using the AF_XDP Device Plugin with the AF_XDP driver
+======================================================
+
+Introduction
+------------
+
+The `AF_XDP Device Plugin for Kubernetes`_ is a project that provisions
+and advertises interfaces (that can be used with AF_XDP) to Kubernetes.
+The project also includes a `CNI`_.
+
+AF_XDP is a Linux socket Address Family that enables an XDP program
+to redirect packets to a memory buffer in userspace.
+
+This document explains how to use the `AF_XDP Device Plugin for Kubernetes`_ with
+a DPDK :doc:`../nics/af_xdp` based application running in a Pod.
+
+.. _AF_XDP Device Plugin for Kubernetes: https://github.com/intel/afxdp-plugins-for-kubernetes
+.. _CNI: https://github.com/containernetworking/cni
+
+Background
+----------
+
+The standard :doc:`../nics/af_xdp` initialization process involves
+loading an eBPF program onto the Kernel netdev to be used by the PMD.
+This operation requires root or escalated Linux privileges and prevents
+the PMD from working in an unprivileged container. The AF_XDP Device Plugin (DP)
+addresses this situation by providing an entity that manages eBPF program
+lifecycle for Pod interfaces that wish to use AF_XDP, this in turn allows
+the pod to be used without privilege escalation.
+
+In order for the pod to run without privilege escalation, the AF_XDP DP
+creates a Unix Domain Socket (UDS) and listens for Pods to make requests
+for XSKMAP(s) File Descriptors (FDs) for interfaces in their network namespace.
+In other words, the DPDK application running in the Pod connects to this UDS and
+initiates a "handshake" to retrieve the XSKMAP(s) FD(s). Upon a successful "handshake",
+the DPDK application receives the FD(s) for the XSKMAP(s) associated with the relevant
+netdevs. The DPDK application can then create the AF_XDP socket(s), and attach
+the socket(s) to the netdev queue(s) by inserting the socket(s) into the XSKMAP(s).
+
+The EAL vdev argument ``uds_path`` is used to indicate that the user
+wishes to run the AF_XDP PMD in unprivileged mode and to receive the XSKMAP
+FD from the AF_XDP DP. When this param is used, the
+``XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD`` libbpf flag is used when creating the
+AF_XDP socket to instruct libbpf/libxdp not to load the default eBPF redirect
+program for AF_XDP on the netdev. Instead the lifecycle management of the eBPF
+program is handled by the AF_XDP DP.
+
+.. note::
+
+ The UDS file path inside the pod appears at "/tmp/afxdp_dp/<netdev>/afxdp.sock".
+
+Prerequisites
+-------------
+
+Device Plugin and DPDK container prerequisites:
+
+* Create a DPDK container image.
+
+* Set up the device plugin and prepare the Pod Spec as described in
+ the instructions for `AF_XDP Device Plugin for Kubernetes`_.
+
+* Increase locked memory limit so containers have enough memory for packet buffers.
+ For example:
+
+ .. code-block:: console
+
+ cat << EOF | sudo tee /etc/systemd/system/containerd.service.d/limits.conf
+ [Service]
+ LimitMEMLOCK=infinity
+ EOF
+
+* dpdk-testpmd application should have AF_XDP feature enabled.
+
+ For further information see the docs for the: :doc:`../../nics/af_xdp`.
+
+
+Example
+-------
+
+How to run dpdk-testpmd with AF_XDP Device plugin:
+
+* Clone the AF_XDP Device plugin
+
+ .. code-block:: console
+
+ # git clone https://github.com/intel/afxdp-plugins-for-kubernetes.git
+
+* Build the AF_XDP Device plugin and the CNI
+
+ .. code-block:: console
+
+ # cd afxdp-plugins-for-kubernetes/
+ # make image
+
+* Make sure to modify the image used by the `daemonset.yml`_ file in the deployments directory with
+ the following configuration:
+
+ .. _daemonset.yml : https://github.com/intel/afxdp-plugins-for-kubernetes/blob/main/deployments/daemonset.yml
+
+ .. code-block:: yaml
+
+ image: afxdp-device-plugin:latest
+
+ .. note::
+
+ This will select the AF_XDP DP image that was built locally. Detailed configuration
+ options can be found in the AF_XDP Device Plugin `readme`_ .
+
+ .. _readme: https://github.com/intel/afxdp-plugins-for-kubernetes#readme
+
+* Deploy the AF_XDP Device Plugin and CNI
+
+ .. code-block:: console
+
+ # kubectl create -f deployments/daemonset.yml
+
+* Create a Network Attachment Definition (NAD)
+
+ .. code-block:: console
+
+ # kubectl create -f nad.yaml
+
+ Sample nad.yml
+
+ .. code-block:: yaml
+
+ apiVersion: "k8s.cni.cncf.io/v1"
+ kind: NetworkAttachmentDefinition
+ metadata:
+ name: afxdp-network
+ annotations:
+ k8s.v1.cni.cncf.io/resourceName: afxdp/myPool
+ spec:
+ config: '{
+ "cniVersion": "0.3.0",
+ "type": "afxdp",
+ "mode": "primary",
+ "logFile": "afxdp-cni.log",
+ "logLevel": "debug",
+ "ethtoolCmds" : ["-N -device- rx-flow-hash udp4 fn",
+ "-N -device- flow-type udp4 dst-port 2152 action 22"
+ ],
+ "ipam": {
+ "type": "host-local",
+ "subnet": "192.168.1.0/24",
+ "rangeStart": "192.168.1.200",
+ "rangeEnd": "192.168.1.220",
+ "routes": [
+ { "dst": "0.0.0.0/0" }
+ ],
+ "gateway": "192.168.1.1"
+ }
+ }'
+
+ For further reference please use the example provided by the AF_XDP DP `nad.yaml`_
+
+ .. _nad.yaml: https://github.com/intel/afxdp-plugins-for-kubernetes/blob/main/examples/network-attachment-definition.yaml
+
+* Build a DPDK container image (using Docker)
+
+ .. code-block:: console
+
+ # docker build -t dpdk -f Dockerfile .
+
+ Sample Dockerfile (should be placed in top level DPDK directory):
+
+ .. code-block:: console
+
+ FROM fedora:38
+
+ # Setup container to build DPDK applications
+ RUN dnf -y upgrade && dnf -y install \
+ libbsd-devel \
+ numactl-libs \
+ libbpf-devel \
+ libbpf \
+ meson \
+ ninja-build \
+ libxdp-devel \
+ libxdp \
+ numactl-devel \
+ python3-pyelftools \
+ python38 \
+ iproute
+ RUN dnf groupinstall -y 'Development Tools'
+
+ # Create DPDK dir and copy over sources
+ WORKDIR /dpdk
+ COPY app app
+ COPY builddir builddir
+ COPY buildtools buildtools
+ COPY config config
+ COPY devtools devtools
+ COPY drivers drivers
+ COPY dts dts
+ COPY examples examples
+ COPY kernel kernel
+ COPY lib lib
+ COPY license license
+ COPY MAINTAINERS MAINTAINERS
+ COPY Makefile Makefile
+ COPY meson.build meson.build
+ COPY meson_options.txt meson_options.txt
+ COPY usertools usertools
+ COPY VERSION VERSION
+ COPY ABI_VERSION ABI_VERSION
+ COPY doc doc
+
+ # Build DPDK
+ RUN meson setup build
+ RUN ninja -C build
+
+ .. note::
+
+ Ensure the Dockerfile is placed in the top level DPDK directory.
+
+* Run the Pod
+
+ .. code-block:: console
+
+ # kubectl create -f pod.yaml
+
+ Sample pod.yaml:
+
+ .. code-block:: yaml
+
+ apiVersion: v1
+ kind: Pod
+ metadata:
+ name: dpdk
+ annotations:
+ k8s.v1.cni.cncf.io/networks: afxdp-network
+ spec:
+ containers:
+ - name: testpmd
+ image: dpdk:latest
+ command: ["tail", "-f", "/dev/null"]
+ securityContext:
+ capabilities:
+ add:
+ - NET_RAW
+ - IPC_LOCK
+ resources:
+ requests:
+ afxdp/myPool: '1'
+ limits:
+ hugepages-1Gi: 2Gi
+ cpu: 2
+ memory: 256Mi
+ afxdp/myPool: '1'
+ volumeMounts:
+ - name: hugepages
+ mountPath: /dev/hugepages
+ volumes:
+ - name: hugepages
+ emptyDir:
+ medium: HugePages
+
+ For further reference please use the `pod.yaml`_
+
+ .. _pod.yaml: https://github.com/intel/afxdp-plugins-for-kubernetes/blob/main/examples/pod-spec.yaml
+
+.. note::
+
+ For Kernel versions older than 5.19 `CAP_BPF` is also required in
+ the container capabilities stanza.
+
+* Run DPDK with a command like the following:
+
+ .. code-block:: console
+
+ kubectl exec -i dpdk --container testpmd -- \
+ ./build/app/dpdk-testpmd -l 0-2 --no-pci --main-lcore=2 \
+ --vdev net_af_xdp,iface=<interface name>,start_queue=22,queue_count=1,uds_path=/tmp/afxdp_dp/<interface name>/afxdp.sock \
+ -- -i --a --nb-cores=2 --rxq=1 --txq=1 --forward-mode=macswap;
diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst
index 71a3381c36..a7692e8a97 100644
--- a/doc/guides/howto/index.rst
+++ b/doc/guides/howto/index.rst
@@ -8,7 +8,7 @@ HowTo Guides
:maxdepth: 2
:numbered:
- af_xdp_cni
+ af_xdp_dp
lm_bond_virtio_sriov
lm_virtio_vhost_user
flow_bifurcation
diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
index 353c8688ec..6caad58e60 100644
--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
@@ -88,7 +88,6 @@ RTE_LOG_REGISTER_DEFAULT(af_xdp_logtype, NOTICE);
#define UDS_MAX_CMD_LEN 64
#define UDS_MAX_CMD_RESP 128
#define UDS_XSK_MAP_FD_MSG "/xsk_map_fd"
-#define UDS_SOCK "/tmp/afxdp.sock"
#define UDS_CONNECT_MSG "/connect"
#define UDS_HOST_OK_MSG "/host_ok"
#define UDS_HOST_NAK_MSG "/host_nak"
@@ -170,7 +169,7 @@ struct pmd_internals {
char prog_path[PATH_MAX];
bool custom_prog_configured;
bool force_copy;
- bool use_cni;
+ char uds_path[PATH_MAX];
struct bpf_map *map;
struct rte_ether_addr eth_addr;
@@ -190,7 +189,7 @@ struct pmd_process_private {
#define ETH_AF_XDP_PROG_ARG "xdp_prog"
#define ETH_AF_XDP_BUDGET_ARG "busy_budget"
#define ETH_AF_XDP_FORCE_COPY_ARG "force_copy"
-#define ETH_AF_XDP_USE_CNI_ARG "use_cni"
+#define ETH_AF_XDP_USE_DP_UDS_PATH_ARG "uds_path"
static const char * const valid_arguments[] = {
ETH_AF_XDP_IFACE_ARG,
@@ -200,7 +199,7 @@ static const char * const valid_arguments[] = {
ETH_AF_XDP_PROG_ARG,
ETH_AF_XDP_BUDGET_ARG,
ETH_AF_XDP_FORCE_COPY_ARG,
- ETH_AF_XDP_USE_CNI_ARG,
+ ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
NULL
};
@@ -1351,7 +1350,7 @@ configure_preferred_busy_poll(struct pkt_rx_queue *rxq)
}
static int
-init_uds_sock(struct sockaddr_un *server)
+init_uds_sock(struct sockaddr_un *server, const char *uds_path)
{
int sock;
@@ -1362,7 +1361,7 @@ init_uds_sock(struct sockaddr_un *server)
}
server->sun_family = AF_UNIX;
- strlcpy(server->sun_path, UDS_SOCK, sizeof(server->sun_path));
+ strlcpy(server->sun_path, uds_path, sizeof(server->sun_path));
if (connect(sock, (struct sockaddr *)server, sizeof(struct sockaddr_un)) < 0) {
close(sock);
@@ -1382,7 +1381,7 @@ struct msg_internal {
};
static int
-send_msg(int sock, char *request, int *fd)
+send_msg(int sock, char *request, int *fd, const char *uds_path)
{
int snd;
struct iovec iov;
@@ -1393,7 +1392,7 @@ send_msg(int sock, char *request, int *fd)
memset(&dst, 0, sizeof(dst));
dst.sun_family = AF_UNIX;
- strlcpy(dst.sun_path, UDS_SOCK, sizeof(dst.sun_path));
+ strlcpy(dst.sun_path, uds_path, sizeof(dst.sun_path));
/* Initialize message header structure */
memset(&msgh, 0, sizeof(msgh));
@@ -1470,8 +1469,8 @@ read_msg(int sock, char *response, struct sockaddr_un *s, int *fd)
}
static int
-make_request_cni(int sock, struct sockaddr_un *server, char *request,
- int *req_fd, char *response, int *out_fd)
+make_request_dp(int sock, struct sockaddr_un *server, char *request,
+ int *req_fd, char *response, int *out_fd, const char *uds_path)
{
int rval;
@@ -1483,7 +1482,7 @@ make_request_cni(int sock, struct sockaddr_un *server, char *request,
if (req_fd == NULL)
rval = write(sock, request, strlen(request));
else
- rval = send_msg(sock, request, req_fd);
+ rval = send_msg(sock, request, req_fd, uds_path);
if (rval < 0) {
AF_XDP_LOG(ERR, "Write error %s\n", strerror(errno));
@@ -1507,7 +1506,7 @@ check_response(char *response, char *exp_resp, long size)
}
static int
-get_cni_fd(char *if_name)
+get_xskmap_fd(char *if_name, const char *uds_path)
{
char request[UDS_MAX_CMD_LEN], response[UDS_MAX_CMD_RESP];
char hostname[MAX_LONG_OPT_SZ], exp_resp[UDS_MAX_CMD_RESP];
@@ -1520,14 +1519,14 @@ get_cni_fd(char *if_name)
return -1;
memset(&server, 0, sizeof(server));
- sock = init_uds_sock(&server);
+ sock = init_uds_sock(&server, uds_path);
if (sock < 0)
return -1;
- /* Initiates handshake to CNI send: /connect,hostname */
+ /* Initiates handshake to AF_XDP Device Plugin send: /connect,hostname */
snprintf(request, sizeof(request), "%s,%s", UDS_CONNECT_MSG, hostname);
memset(response, 0, sizeof(response));
- if (make_request_cni(sock, &server, request, NULL, response, &out_fd) < 0) {
+ if (make_request_dp(sock, &server, request, NULL, response, &out_fd, uds_path) < 0) {
AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
goto err_close;
}
@@ -1541,7 +1540,7 @@ get_cni_fd(char *if_name)
/* Request for "/version" */
strlcpy(request, UDS_VERSION_MSG, UDS_MAX_CMD_LEN);
memset(response, 0, sizeof(response));
- if (make_request_cni(sock, &server, request, NULL, response, &out_fd) < 0) {
+ if (make_request_dp(sock, &server, request, NULL, response, &out_fd, uds_path) < 0) {
AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
goto err_close;
}
@@ -1549,7 +1548,7 @@ get_cni_fd(char *if_name)
/* Request for file descriptor for netdev name*/
snprintf(request, sizeof(request), "%s,%s", UDS_XSK_MAP_FD_MSG, if_name);
memset(response, 0, sizeof(response));
- if (make_request_cni(sock, &server, request, NULL, response, &out_fd) < 0) {
+ if (make_request_dp(sock, &server, request, NULL, response, &out_fd, uds_path) < 0) {
AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
goto err_close;
}
@@ -1571,7 +1570,7 @@ get_cni_fd(char *if_name)
/* Initiate close connection */
strlcpy(request, UDS_FIN_MSG, UDS_MAX_CMD_LEN);
memset(response, 0, sizeof(response));
- if (make_request_cni(sock, &server, request, NULL, response, &out_fd) < 0) {
+ if (make_request_dp(sock, &server, request, NULL, response, &out_fd, uds_path) < 0) {
AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
goto err_close;
}
@@ -1640,7 +1639,7 @@ xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
#endif
/* Disable libbpf from loading XDP program */
- if (internals->use_cni)
+ if (strnlen(internals->uds_path, PATH_MAX))
cfg.libbpf_flags |= XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD;
if (strnlen(internals->prog_path, PATH_MAX)) {
@@ -1694,18 +1693,17 @@ xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
}
}
- if (internals->use_cni) {
- int err, fd, map_fd;
+ if (strnlen(internals->uds_path, PATH_MAX)) {
+ int err, map_fd;
- /* get socket fd from CNI plugin */
- map_fd = get_cni_fd(internals->if_name);
+ /* get socket fd from AF_XDP Device plugin */
+ map_fd = get_xskmap_fd(internals->if_name, internals->uds_path);
if (map_fd < 0) {
- AF_XDP_LOG(ERR, "Failed to receive CNI plugin fd\n");
+ AF_XDP_LOG(ERR, "Failed to receive AF_XDP Device plugin fd\n");
goto out_xsk;
}
- /* get socket fd */
- fd = xsk_socket__fd(rxq->xsk);
- err = bpf_map_update_elem(map_fd, &rxq->xsk_queue_idx, &fd, 0);
+
+ err = xsk_socket__update_xskmap(rxq->xsk, map_fd);
if (err) {
AF_XDP_LOG(ERR, "Failed to insert unprivileged xsk in map.\n");
goto out_xsk;
@@ -1881,13 +1879,13 @@ static const struct eth_dev_ops ops = {
.get_monitor_addr = eth_get_monitor_addr,
};
-/* CNI option works in unprivileged container environment
- * and ethernet device functionality will be reduced. So
- * additional customiszed eth_dev_ops struct is needed
- * for cni. Promiscuous enable and disable functionality
- * is removed.
- **/
-static const struct eth_dev_ops ops_cni = {
+/* AF_XDP Device Plugin option works in unprivileged
+ * container environment and ethernet device functionality
+ * will be reduced. So additional customized eth_dev_ops
+ * struct is needed for the AF_XDP Device Plugin. Promiscuous
+ * enable and disable functionality is removed.
+ */
+static const struct eth_dev_ops ops_afxdp_dp = {
.dev_start = eth_dev_start,
.dev_stop = eth_dev_stop,
.dev_close = eth_dev_close,
@@ -1957,7 +1955,7 @@ parse_name_arg(const char *key __rte_unused,
/** parse xdp prog argument */
static int
-parse_prog_arg(const char *key __rte_unused,
+parse_path_arg(const char *key __rte_unused,
const char *value, void *extra_args)
{
char *path = extra_args;
@@ -2023,7 +2021,7 @@ xdp_get_channels_info(const char *if_name, int *max_queues,
static int
parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
int *queue_cnt, int *shared_umem, char *prog_path,
- int *busy_budget, int *force_copy, int *use_cni)
+ int *busy_budget, int *force_copy, char *uds_path)
{
int ret;
@@ -2050,7 +2048,7 @@ parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
goto free_kvlist;
ret = rte_kvargs_process(kvlist, ETH_AF_XDP_PROG_ARG,
- &parse_prog_arg, prog_path);
+ &parse_path_arg, prog_path);
if (ret < 0)
goto free_kvlist;
@@ -2064,8 +2062,8 @@ parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
if (ret < 0)
goto free_kvlist;
- ret = rte_kvargs_process(kvlist, ETH_AF_XDP_USE_CNI_ARG,
- &parse_integer_arg, use_cni);
+ ret = rte_kvargs_process(kvlist, ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
+ &parse_path_arg, uds_path);
if (ret < 0)
goto free_kvlist;
@@ -2108,7 +2106,7 @@ static struct rte_eth_dev *
init_internals(struct rte_vdev_device *dev, const char *if_name,
int start_queue_idx, int queue_cnt, int shared_umem,
const char *prog_path, int busy_budget, int force_copy,
- int use_cni)
+ const char *uds_path)
{
const char *name = rte_vdev_device_name(dev);
const unsigned int numa_node = dev->device.numa_node;
@@ -2137,7 +2135,7 @@ init_internals(struct rte_vdev_device *dev, const char *if_name,
#endif
internals->shared_umem = shared_umem;
internals->force_copy = force_copy;
- internals->use_cni = use_cni;
+ strlcpy(internals->uds_path, uds_path, PATH_MAX);
if (xdp_get_channels_info(if_name, &internals->max_queue_cnt,
&internals->combined_queue_cnt)) {
@@ -2196,10 +2194,10 @@ init_internals(struct rte_vdev_device *dev, const char *if_name,
eth_dev->data->dev_link = pmd_link;
eth_dev->data->mac_addrs = &internals->eth_addr;
eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
- if (!internals->use_cni)
+ if (!strnlen(internals->uds_path, PATH_MAX))
eth_dev->dev_ops = &ops;
else
- eth_dev->dev_ops = &ops_cni;
+ eth_dev->dev_ops = &ops_afxdp_dp;
eth_dev->rx_pkt_burst = eth_af_xdp_rx;
eth_dev->tx_pkt_burst = eth_af_xdp_tx;
@@ -2327,7 +2325,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
char prog_path[PATH_MAX] = {'\0'};
int busy_budget = -1, ret;
int force_copy = 0;
- int use_cni = 0;
+ char uds_path[PATH_MAX] = {'\0'};
struct rte_eth_dev *eth_dev = NULL;
const char *name = rte_vdev_device_name(dev);
@@ -2370,20 +2368,20 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
if (parse_parameters(kvlist, if_name, &xsk_start_queue_idx,
&xsk_queue_cnt, &shared_umem, prog_path,
- &busy_budget, &force_copy, &use_cni) < 0) {
+ &busy_budget, &force_copy, uds_path) < 0) {
AF_XDP_LOG(ERR, "Invalid kvargs value\n");
return -EINVAL;
}
- if (use_cni && busy_budget > 0) {
+ if (strnlen(uds_path, PATH_MAX) && busy_budget > 0) {
AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s' parameter is not valid\n",
- ETH_AF_XDP_USE_CNI_ARG, ETH_AF_XDP_BUDGET_ARG);
+ ETH_AF_XDP_USE_DP_UDS_PATH_ARG, ETH_AF_XDP_BUDGET_ARG);
return -EINVAL;
}
- if (use_cni && strnlen(prog_path, PATH_MAX)) {
+ if (strnlen(uds_path, PATH_MAX) && strnlen(prog_path, PATH_MAX)) {
AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s' parameter is not valid\n",
- ETH_AF_XDP_USE_CNI_ARG, ETH_AF_XDP_PROG_ARG);
+ ETH_AF_XDP_USE_DP_UDS_PATH_ARG, ETH_AF_XDP_PROG_ARG);
return -EINVAL;
}
@@ -2410,7 +2408,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
eth_dev = init_internals(dev, if_name, xsk_start_queue_idx,
xsk_queue_cnt, shared_umem, prog_path,
- busy_budget, force_copy, use_cni);
+ busy_budget, force_copy, uds_path);
if (eth_dev == NULL) {
AF_XDP_LOG(ERR, "Failed to init internals\n");
return -1;
@@ -2471,4 +2469,4 @@ RTE_PMD_REGISTER_PARAM_STRING(net_af_xdp,
"xdp_prog=<string> "
"busy_budget=<int> "
"force_copy=<int> "
- "use_cni=<int> ");
+ "uds_path=<string> ");
--
2.41.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [v4] net/af_xdp: enable uds_path instead of use_cni
2023-12-13 12:24 [v4] net/af_xdp: enable uds_path instead of use_cni Maryam Tahhan
@ 2023-12-15 9:55 ` Loftus, Ciara
2023-12-15 10:26 ` Maryam Tahhan
0 siblings, 1 reply; 3+ messages in thread
From: Loftus, Ciara @ 2023-12-15 9:55 UTC (permalink / raw)
To: Tahhan, Maryam, ferruh.yigit, stephen, lihuisong, fengchengwen,
liuyonglong, Koikkara Reeny, Shibin
Cc: dev, Tahhan, Maryam
Thanks for the latest patch Maryam. I have one minor suggestion inline.
Also, there are still some references to "use_cni" in af_xdp.rst which should be removed/replaced with uds_path.
Once that's done I think the patch should be good to go. Perhaps also consider adding a note to the release notes mentioning the new functionality.
Thanks,
Ciara
>
> With the original 'use_cni' implementation, (using a
> hardcoded socket rather than a configurable one),
> if a DPDK pod is requesting multiple net devices
> and these devices are from different pools, then
> the container attempts to mount all the netdev UDSes
> in the pod as /tmp/afxdp.sock. Which means that at best
> only 1 netdev will handshake correctly with the AF_XDP
> DP. This patch addresses this by making the socket
> parameter configurable using a new vdev param called
> 'uds_path' and removing the previous 'use_cni' param.
> This patch also fixes incorrect references to the
> AF_XDP DP as CNI and updates the documentation with a
> working example. This change has been tested with the
> AF_XDP DP PR 81, with both single and multiple interfaces.
>
> v4:
> * Rename af_xdp_cni.rst to af_xdp_dp.rst
> * Removed all incorrect references to CNI throughout af_xdp
> PMD file.
> * Fixed Typos in af_xdp_dp.rst
>
> v3:
> * Remove `use_cni` vdev argument as it's no longer needed.
> * Update incorrect CNI references for the AF_XDP DP in the
> documentation.
> * Update the documentation to run a simple example with the
> AF_XDP DP plugin in K8s.
>
> v2:
> * Rename sock_path to uds_path.
> * Update documentation to reflect when CAP_BPF is needed.
> * Fix testpmd arguments in the provided example for Pods.
> * Use AF_XDP API to update the xskmap entry.
>
> Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
> ---
> doc/guides/howto/af_xdp_cni.rst | 253 -------------------------
> doc/guides/howto/af_xdp_dp.rst | 278
> ++++++++++++++++++++++++++++
> doc/guides/howto/index.rst | 2 +-
> drivers/net/af_xdp/rte_eth_af_xdp.c | 100 +++++-----
> 4 files changed, 328 insertions(+), 305 deletions(-)
> delete mode 100644 doc/guides/howto/af_xdp_cni.rst
> create mode 100644 doc/guides/howto/af_xdp_dp.rst
>
<snip>
> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c
> b/drivers/net/af_xdp/rte_eth_af_xdp.c
> index 353c8688ec..6caad58e60 100644
> --- a/drivers/net/af_xdp/rte_eth_af_xdp.c
> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
> @@ -88,7 +88,6 @@ RTE_LOG_REGISTER_DEFAULT(af_xdp_logtype, NOTICE);
> #define UDS_MAX_CMD_LEN 64
> #define UDS_MAX_CMD_RESP 128
> #define UDS_XSK_MAP_FD_MSG "/xsk_map_fd"
> -#define UDS_SOCK "/tmp/afxdp.sock"
> #define UDS_CONNECT_MSG "/connect"
> #define UDS_HOST_OK_MSG "/host_ok"
> #define UDS_HOST_NAK_MSG "/host_nak"
> @@ -170,7 +169,7 @@ struct pmd_internals {
> char prog_path[PATH_MAX];
> bool custom_prog_configured;
> bool force_copy;
> - bool use_cni;
> + char uds_path[PATH_MAX];
> struct bpf_map *map;
>
> struct rte_ether_addr eth_addr;
> @@ -190,7 +189,7 @@ struct pmd_process_private {
> #define ETH_AF_XDP_PROG_ARG "xdp_prog"
> #define ETH_AF_XDP_BUDGET_ARG "busy_budget"
> #define ETH_AF_XDP_FORCE_COPY_ARG "force_copy"
> -#define ETH_AF_XDP_USE_CNI_ARG "use_cni"
> +#define ETH_AF_XDP_USE_DP_UDS_PATH_ARG "uds_path"
Use the same alignment for "uds_path" as the strings above it.
>
> static const char * const valid_arguments[] = {
> ETH_AF_XDP_IFACE_ARG,
> @@ -200,7 +199,7 @@ static const char * const valid_arguments[] = {
> ETH_AF_XDP_PROG_ARG,
> ETH_AF_XDP_BUDGET_ARG,
> ETH_AF_XDP_FORCE_COPY_ARG,
> - ETH_AF_XDP_USE_CNI_ARG,
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> NULL
> };
>
> @@ -1351,7 +1350,7 @@ configure_preferred_busy_poll(struct
> pkt_rx_queue *rxq)
> }
>
> static int
> -init_uds_sock(struct sockaddr_un *server)
> +init_uds_sock(struct sockaddr_un *server, const char *uds_path)
> {
> int sock;
>
> @@ -1362,7 +1361,7 @@ init_uds_sock(struct sockaddr_un *server)
> }
>
> server->sun_family = AF_UNIX;
> - strlcpy(server->sun_path, UDS_SOCK, sizeof(server->sun_path));
> + strlcpy(server->sun_path, uds_path, sizeof(server->sun_path));
>
> if (connect(sock, (struct sockaddr *)server, sizeof(struct
> sockaddr_un)) < 0) {
> close(sock);
> @@ -1382,7 +1381,7 @@ struct msg_internal {
> };
>
> static int
> -send_msg(int sock, char *request, int *fd)
> +send_msg(int sock, char *request, int *fd, const char *uds_path)
> {
> int snd;
> struct iovec iov;
> @@ -1393,7 +1392,7 @@ send_msg(int sock, char *request, int *fd)
>
> memset(&dst, 0, sizeof(dst));
> dst.sun_family = AF_UNIX;
> - strlcpy(dst.sun_path, UDS_SOCK, sizeof(dst.sun_path));
> + strlcpy(dst.sun_path, uds_path, sizeof(dst.sun_path));
>
> /* Initialize message header structure */
> memset(&msgh, 0, sizeof(msgh));
> @@ -1470,8 +1469,8 @@ read_msg(int sock, char *response, struct
> sockaddr_un *s, int *fd)
> }
>
> static int
> -make_request_cni(int sock, struct sockaddr_un *server, char *request,
> - int *req_fd, char *response, int *out_fd)
> +make_request_dp(int sock, struct sockaddr_un *server, char *request,
> + int *req_fd, char *response, int *out_fd, const char
> *uds_path)
> {
> int rval;
>
> @@ -1483,7 +1482,7 @@ make_request_cni(int sock, struct sockaddr_un
> *server, char *request,
> if (req_fd == NULL)
> rval = write(sock, request, strlen(request));
> else
> - rval = send_msg(sock, request, req_fd);
> + rval = send_msg(sock, request, req_fd, uds_path);
>
> if (rval < 0) {
> AF_XDP_LOG(ERR, "Write error %s\n", strerror(errno));
> @@ -1507,7 +1506,7 @@ check_response(char *response, char *exp_resp,
> long size)
> }
>
> static int
> -get_cni_fd(char *if_name)
> +get_xskmap_fd(char *if_name, const char *uds_path)
> {
> char request[UDS_MAX_CMD_LEN],
> response[UDS_MAX_CMD_RESP];
> char hostname[MAX_LONG_OPT_SZ],
> exp_resp[UDS_MAX_CMD_RESP];
> @@ -1520,14 +1519,14 @@ get_cni_fd(char *if_name)
> return -1;
>
> memset(&server, 0, sizeof(server));
> - sock = init_uds_sock(&server);
> + sock = init_uds_sock(&server, uds_path);
> if (sock < 0)
> return -1;
>
> - /* Initiates handshake to CNI send: /connect,hostname */
> + /* Initiates handshake to AF_XDP Device Plugin send:
> /connect,hostname */
> snprintf(request, sizeof(request), "%s,%s", UDS_CONNECT_MSG,
> hostname);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1541,7 +1540,7 @@ get_cni_fd(char *if_name)
> /* Request for "/version" */
> strlcpy(request, UDS_VERSION_MSG, UDS_MAX_CMD_LEN);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1549,7 +1548,7 @@ get_cni_fd(char *if_name)
> /* Request for file descriptor for netdev name*/
> snprintf(request, sizeof(request), "%s,%s", UDS_XSK_MAP_FD_MSG,
> if_name);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1571,7 +1570,7 @@ get_cni_fd(char *if_name)
> /* Initiate close connection */
> strlcpy(request, UDS_FIN_MSG, UDS_MAX_CMD_LEN);
> memset(response, 0, sizeof(response));
> - if (make_request_cni(sock, &server, request, NULL, response,
> &out_fd) < 0) {
> + if (make_request_dp(sock, &server, request, NULL, response,
> &out_fd, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
> goto err_close;
> }
> @@ -1640,7 +1639,7 @@ xsk_configure(struct pmd_internals *internals,
> struct pkt_rx_queue *rxq,
> #endif
>
> /* Disable libbpf from loading XDP program */
> - if (internals->use_cni)
> + if (strnlen(internals->uds_path, PATH_MAX))
> cfg.libbpf_flags |= XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD;
>
> if (strnlen(internals->prog_path, PATH_MAX)) {
> @@ -1694,18 +1693,17 @@ xsk_configure(struct pmd_internals *internals,
> struct pkt_rx_queue *rxq,
> }
> }
>
> - if (internals->use_cni) {
> - int err, fd, map_fd;
> + if (strnlen(internals->uds_path, PATH_MAX)) {
> + int err, map_fd;
>
> - /* get socket fd from CNI plugin */
> - map_fd = get_cni_fd(internals->if_name);
> + /* get socket fd from AF_XDP Device plugin */
> + map_fd = get_xskmap_fd(internals->if_name, internals-
> >uds_path);
> if (map_fd < 0) {
> - AF_XDP_LOG(ERR, "Failed to receive CNI plugin fd\n");
> + AF_XDP_LOG(ERR, "Failed to receive AF_XDP Device
> plugin fd\n");
> goto out_xsk;
> }
> - /* get socket fd */
> - fd = xsk_socket__fd(rxq->xsk);
> - err = bpf_map_update_elem(map_fd, &rxq->xsk_queue_idx,
> &fd, 0);
> +
> + err = xsk_socket__update_xskmap(rxq->xsk, map_fd);
> if (err) {
> AF_XDP_LOG(ERR, "Failed to insert unprivileged xsk in
> map.\n");
> goto out_xsk;
> @@ -1881,13 +1879,13 @@ static const struct eth_dev_ops ops = {
> .get_monitor_addr = eth_get_monitor_addr,
> };
>
> -/* CNI option works in unprivileged container environment
> - * and ethernet device functionality will be reduced. So
> - * additional customiszed eth_dev_ops struct is needed
> - * for cni. Promiscuous enable and disable functionality
> - * is removed.
> - **/
> -static const struct eth_dev_ops ops_cni = {
> +/* AF_XDP Device Plugin option works in unprivileged
> + * container environment and ethernet device functionality
> + * will be reduced. So additional customized eth_dev_ops
> + * struct is needed for the AF_XDP Device Plugin. Promiscuous
> + * enable and disable functionality is removed.
> + */
> +static const struct eth_dev_ops ops_afxdp_dp = {
> .dev_start = eth_dev_start,
> .dev_stop = eth_dev_stop,
> .dev_close = eth_dev_close,
> @@ -1957,7 +1955,7 @@ parse_name_arg(const char *key __rte_unused,
>
> /** parse xdp prog argument */
> static int
> -parse_prog_arg(const char *key __rte_unused,
> +parse_path_arg(const char *key __rte_unused,
> const char *value, void *extra_args)
> {
> char *path = extra_args;
> @@ -2023,7 +2021,7 @@ xdp_get_channels_info(const char *if_name, int
> *max_queues,
> static int
> parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
> int *queue_cnt, int *shared_umem, char *prog_path,
> - int *busy_budget, int *force_copy, int *use_cni)
> + int *busy_budget, int *force_copy, char *uds_path)
> {
> int ret;
>
> @@ -2050,7 +2048,7 @@ parse_parameters(struct rte_kvargs *kvlist, char
> *if_name, int *start_queue,
> goto free_kvlist;
>
> ret = rte_kvargs_process(kvlist, ETH_AF_XDP_PROG_ARG,
> - &parse_prog_arg, prog_path);
> + &parse_path_arg, prog_path);
> if (ret < 0)
> goto free_kvlist;
>
> @@ -2064,8 +2062,8 @@ parse_parameters(struct rte_kvargs *kvlist, char
> *if_name, int *start_queue,
> if (ret < 0)
> goto free_kvlist;
>
> - ret = rte_kvargs_process(kvlist, ETH_AF_XDP_USE_CNI_ARG,
> - &parse_integer_arg, use_cni);
> + ret = rte_kvargs_process(kvlist,
> ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> + &parse_path_arg, uds_path);
> if (ret < 0)
> goto free_kvlist;
>
> @@ -2108,7 +2106,7 @@ static struct rte_eth_dev *
> init_internals(struct rte_vdev_device *dev, const char *if_name,
> int start_queue_idx, int queue_cnt, int shared_umem,
> const char *prog_path, int busy_budget, int force_copy,
> - int use_cni)
> + const char *uds_path)
> {
> const char *name = rte_vdev_device_name(dev);
> const unsigned int numa_node = dev->device.numa_node;
> @@ -2137,7 +2135,7 @@ init_internals(struct rte_vdev_device *dev, const
> char *if_name,
> #endif
> internals->shared_umem = shared_umem;
> internals->force_copy = force_copy;
> - internals->use_cni = use_cni;
> + strlcpy(internals->uds_path, uds_path, PATH_MAX);
>
> if (xdp_get_channels_info(if_name, &internals->max_queue_cnt,
> &internals->combined_queue_cnt)) {
> @@ -2196,10 +2194,10 @@ init_internals(struct rte_vdev_device *dev, const
> char *if_name,
> eth_dev->data->dev_link = pmd_link;
> eth_dev->data->mac_addrs = &internals->eth_addr;
> eth_dev->data->dev_flags |=
> RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
> - if (!internals->use_cni)
> + if (!strnlen(internals->uds_path, PATH_MAX))
> eth_dev->dev_ops = &ops;
> else
> - eth_dev->dev_ops = &ops_cni;
> + eth_dev->dev_ops = &ops_afxdp_dp;
>
> eth_dev->rx_pkt_burst = eth_af_xdp_rx;
> eth_dev->tx_pkt_burst = eth_af_xdp_tx;
> @@ -2327,7 +2325,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
> char prog_path[PATH_MAX] = {'\0'};
> int busy_budget = -1, ret;
> int force_copy = 0;
> - int use_cni = 0;
> + char uds_path[PATH_MAX] = {'\0'};
> struct rte_eth_dev *eth_dev = NULL;
> const char *name = rte_vdev_device_name(dev);
>
> @@ -2370,20 +2368,20 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
>
> if (parse_parameters(kvlist, if_name, &xsk_start_queue_idx,
> &xsk_queue_cnt, &shared_umem, prog_path,
> - &busy_budget, &force_copy, &use_cni) < 0) {
> + &busy_budget, &force_copy, uds_path) < 0) {
> AF_XDP_LOG(ERR, "Invalid kvargs value\n");
> return -EINVAL;
> }
>
> - if (use_cni && busy_budget > 0) {
> + if (strnlen(uds_path, PATH_MAX) && busy_budget > 0) {
> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
> parameter is not valid\n",
> - ETH_AF_XDP_USE_CNI_ARG,
> ETH_AF_XDP_BUDGET_ARG);
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> ETH_AF_XDP_BUDGET_ARG);
> return -EINVAL;
> }
>
> - if (use_cni && strnlen(prog_path, PATH_MAX)) {
> + if (strnlen(uds_path, PATH_MAX) && strnlen(prog_path, PATH_MAX))
> {
> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
> parameter is not valid\n",
> - ETH_AF_XDP_USE_CNI_ARG,
> ETH_AF_XDP_PROG_ARG);
> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
> ETH_AF_XDP_PROG_ARG);
> return -EINVAL;
> }
>
> @@ -2410,7 +2408,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
> *dev)
>
> eth_dev = init_internals(dev, if_name, xsk_start_queue_idx,
> xsk_queue_cnt, shared_umem, prog_path,
> - busy_budget, force_copy, use_cni);
> + busy_budget, force_copy, uds_path);
> if (eth_dev == NULL) {
> AF_XDP_LOG(ERR, "Failed to init internals\n");
> return -1;
> @@ -2471,4 +2469,4 @@ RTE_PMD_REGISTER_PARAM_STRING(net_af_xdp,
> "xdp_prog=<string> "
> "busy_budget=<int> "
> "force_copy=<int> "
> - "use_cni=<int> ");
> + "uds_path=<string> ");
> --
> 2.41.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [v4] net/af_xdp: enable uds_path instead of use_cni
2023-12-15 9:55 ` Loftus, Ciara
@ 2023-12-15 10:26 ` Maryam Tahhan
0 siblings, 0 replies; 3+ messages in thread
From: Maryam Tahhan @ 2023-12-15 10:26 UTC (permalink / raw)
To: Loftus, Ciara, ferruh.yigit, stephen, lihuisong, fengchengwen,
liuyonglong, Koikkara Reeny, Shibin
Cc: dev
Thanks Ciara, I missed the af_xdp.rst :(
Will update and push a v5 shortly
On 15/12/2023 09:55, Loftus, Ciara wrote:
> Thanks for the latest patch Maryam. I have one minor suggestion inline.
> Also, there are still some references to "use_cni" in af_xdp.rst which should be removed/replaced with uds_path.
> Once that's done I think the patch should be good to go. Perhaps also consider adding a note to the release notes mentioning the new functionality.
>
> Thanks,
> Ciara
>
>> With the original 'use_cni' implementation, (using a
>> hardcoded socket rather than a configurable one),
>> if a DPDK pod is requesting multiple net devices
>> and these devices are from different pools, then
>> the container attempts to mount all the netdev UDSes
>> in the pod as /tmp/afxdp.sock. Which means that at best
>> only 1 netdev will handshake correctly with the AF_XDP
>> DP. This patch addresses this by making the socket
>> parameter configurable using a new vdev param called
>> 'uds_path' and removing the previous 'use_cni' param.
>> This patch also fixes incorrect references to the
>> AF_XDP DP as CNI and updates the documentation with a
>> working example. This change has been tested with the
>> AF_XDP DP PR 81, with both single and multiple interfaces.
>>
>> v4:
>> * Rename af_xdp_cni.rst to af_xdp_dp.rst
>> * Removed all incorrect references to CNI throughout af_xdp
>> PMD file.
>> * Fixed Typos in af_xdp_dp.rst
>>
>> v3:
>> * Remove `use_cni` vdev argument as it's no longer needed.
>> * Update incorrect CNI references for the AF_XDP DP in the
>> documentation.
>> * Update the documentation to run a simple example with the
>> AF_XDP DP plugin in K8s.
>>
>> v2:
>> * Rename sock_path to uds_path.
>> * Update documentation to reflect when CAP_BPF is needed.
>> * Fix testpmd arguments in the provided example for Pods.
>> * Use AF_XDP API to update the xskmap entry.
>>
>> Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
>> ---
>> doc/guides/howto/af_xdp_cni.rst | 253 -------------------------
>> doc/guides/howto/af_xdp_dp.rst | 278
>> ++++++++++++++++++++++++++++
>> doc/guides/howto/index.rst | 2 +-
>> drivers/net/af_xdp/rte_eth_af_xdp.c | 100 +++++-----
>> 4 files changed, 328 insertions(+), 305 deletions(-)
>> delete mode 100644 doc/guides/howto/af_xdp_cni.rst
>> create mode 100644 doc/guides/howto/af_xdp_dp.rst
>>
> <snip>
>
>> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c
>> b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> index 353c8688ec..6caad58e60 100644
>> --- a/drivers/net/af_xdp/rte_eth_af_xdp.c
>> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> @@ -88,7 +88,6 @@ RTE_LOG_REGISTER_DEFAULT(af_xdp_logtype, NOTICE);
>> #define UDS_MAX_CMD_LEN 64
>> #define UDS_MAX_CMD_RESP 128
>> #define UDS_XSK_MAP_FD_MSG "/xsk_map_fd"
>> -#define UDS_SOCK "/tmp/afxdp.sock"
>> #define UDS_CONNECT_MSG "/connect"
>> #define UDS_HOST_OK_MSG "/host_ok"
>> #define UDS_HOST_NAK_MSG "/host_nak"
>> @@ -170,7 +169,7 @@ struct pmd_internals {
>> char prog_path[PATH_MAX];
>> bool custom_prog_configured;
>> bool force_copy;
>> - bool use_cni;
>> + char uds_path[PATH_MAX];
>> struct bpf_map *map;
>>
>> struct rte_ether_addr eth_addr;
>> @@ -190,7 +189,7 @@ struct pmd_process_private {
>> #define ETH_AF_XDP_PROG_ARG "xdp_prog"
>> #define ETH_AF_XDP_BUDGET_ARG "busy_budget"
>> #define ETH_AF_XDP_FORCE_COPY_ARG "force_copy"
>> -#define ETH_AF_XDP_USE_CNI_ARG "use_cni"
>> +#define ETH_AF_XDP_USE_DP_UDS_PATH_ARG "uds_path"
> Use the same alignment for "uds_path" as the strings above it.
>
>> static const char * const valid_arguments[] = {
>> ETH_AF_XDP_IFACE_ARG,
>> @@ -200,7 +199,7 @@ static const char * const valid_arguments[] = {
>> ETH_AF_XDP_PROG_ARG,
>> ETH_AF_XDP_BUDGET_ARG,
>> ETH_AF_XDP_FORCE_COPY_ARG,
>> - ETH_AF_XDP_USE_CNI_ARG,
>> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
>> NULL
>> };
>>
>> @@ -1351,7 +1350,7 @@ configure_preferred_busy_poll(struct
>> pkt_rx_queue *rxq)
>> }
>>
>> static int
>> -init_uds_sock(struct sockaddr_un *server)
>> +init_uds_sock(struct sockaddr_un *server, const char *uds_path)
>> {
>> int sock;
>>
>> @@ -1362,7 +1361,7 @@ init_uds_sock(struct sockaddr_un *server)
>> }
>>
>> server->sun_family = AF_UNIX;
>> - strlcpy(server->sun_path, UDS_SOCK, sizeof(server->sun_path));
>> + strlcpy(server->sun_path, uds_path, sizeof(server->sun_path));
>>
>> if (connect(sock, (struct sockaddr *)server, sizeof(struct
>> sockaddr_un)) < 0) {
>> close(sock);
>> @@ -1382,7 +1381,7 @@ struct msg_internal {
>> };
>>
>> static int
>> -send_msg(int sock, char *request, int *fd)
>> +send_msg(int sock, char *request, int *fd, const char *uds_path)
>> {
>> int snd;
>> struct iovec iov;
>> @@ -1393,7 +1392,7 @@ send_msg(int sock, char *request, int *fd)
>>
>> memset(&dst, 0, sizeof(dst));
>> dst.sun_family = AF_UNIX;
>> - strlcpy(dst.sun_path, UDS_SOCK, sizeof(dst.sun_path));
>> + strlcpy(dst.sun_path, uds_path, sizeof(dst.sun_path));
>>
>> /* Initialize message header structure */
>> memset(&msgh, 0, sizeof(msgh));
>> @@ -1470,8 +1469,8 @@ read_msg(int sock, char *response, struct
>> sockaddr_un *s, int *fd)
>> }
>>
>> static int
>> -make_request_cni(int sock, struct sockaddr_un *server, char *request,
>> - int *req_fd, char *response, int *out_fd)
>> +make_request_dp(int sock, struct sockaddr_un *server, char *request,
>> + int *req_fd, char *response, int *out_fd, const char
>> *uds_path)
>> {
>> int rval;
>>
>> @@ -1483,7 +1482,7 @@ make_request_cni(int sock, struct sockaddr_un
>> *server, char *request,
>> if (req_fd == NULL)
>> rval = write(sock, request, strlen(request));
>> else
>> - rval = send_msg(sock, request, req_fd);
>> + rval = send_msg(sock, request, req_fd, uds_path);
>>
>> if (rval < 0) {
>> AF_XDP_LOG(ERR, "Write error %s\n", strerror(errno));
>> @@ -1507,7 +1506,7 @@ check_response(char *response, char *exp_resp,
>> long size)
>> }
>>
>> static int
>> -get_cni_fd(char *if_name)
>> +get_xskmap_fd(char *if_name, const char *uds_path)
>> {
>> char request[UDS_MAX_CMD_LEN],
>> response[UDS_MAX_CMD_RESP];
>> char hostname[MAX_LONG_OPT_SZ],
>> exp_resp[UDS_MAX_CMD_RESP];
>> @@ -1520,14 +1519,14 @@ get_cni_fd(char *if_name)
>> return -1;
>>
>> memset(&server, 0, sizeof(server));
>> - sock = init_uds_sock(&server);
>> + sock = init_uds_sock(&server, uds_path);
>> if (sock < 0)
>> return -1;
>>
>> - /* Initiates handshake to CNI send: /connect,hostname */
>> + /* Initiates handshake to AF_XDP Device Plugin send:
>> /connect,hostname */
>> snprintf(request, sizeof(request), "%s,%s", UDS_CONNECT_MSG,
>> hostname);
>> memset(response, 0, sizeof(response));
>> - if (make_request_cni(sock, &server, request, NULL, response,
>> &out_fd) < 0) {
>> + if (make_request_dp(sock, &server, request, NULL, response,
>> &out_fd, uds_path) < 0) {
>> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
>> goto err_close;
>> }
>> @@ -1541,7 +1540,7 @@ get_cni_fd(char *if_name)
>> /* Request for "/version" */
>> strlcpy(request, UDS_VERSION_MSG, UDS_MAX_CMD_LEN);
>> memset(response, 0, sizeof(response));
>> - if (make_request_cni(sock, &server, request, NULL, response,
>> &out_fd) < 0) {
>> + if (make_request_dp(sock, &server, request, NULL, response,
>> &out_fd, uds_path) < 0) {
>> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
>> goto err_close;
>> }
>> @@ -1549,7 +1548,7 @@ get_cni_fd(char *if_name)
>> /* Request for file descriptor for netdev name*/
>> snprintf(request, sizeof(request), "%s,%s", UDS_XSK_MAP_FD_MSG,
>> if_name);
>> memset(response, 0, sizeof(response));
>> - if (make_request_cni(sock, &server, request, NULL, response,
>> &out_fd) < 0) {
>> + if (make_request_dp(sock, &server, request, NULL, response,
>> &out_fd, uds_path) < 0) {
>> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
>> goto err_close;
>> }
>> @@ -1571,7 +1570,7 @@ get_cni_fd(char *if_name)
>> /* Initiate close connection */
>> strlcpy(request, UDS_FIN_MSG, UDS_MAX_CMD_LEN);
>> memset(response, 0, sizeof(response));
>> - if (make_request_cni(sock, &server, request, NULL, response,
>> &out_fd) < 0) {
>> + if (make_request_dp(sock, &server, request, NULL, response,
>> &out_fd, uds_path) < 0) {
>> AF_XDP_LOG(ERR, "Error in processing cmd [%s]\n", request);
>> goto err_close;
>> }
>> @@ -1640,7 +1639,7 @@ xsk_configure(struct pmd_internals *internals,
>> struct pkt_rx_queue *rxq,
>> #endif
>>
>> /* Disable libbpf from loading XDP program */
>> - if (internals->use_cni)
>> + if (strnlen(internals->uds_path, PATH_MAX))
>> cfg.libbpf_flags |= XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD;
>>
>> if (strnlen(internals->prog_path, PATH_MAX)) {
>> @@ -1694,18 +1693,17 @@ xsk_configure(struct pmd_internals *internals,
>> struct pkt_rx_queue *rxq,
>> }
>> }
>>
>> - if (internals->use_cni) {
>> - int err, fd, map_fd;
>> + if (strnlen(internals->uds_path, PATH_MAX)) {
>> + int err, map_fd;
>>
>> - /* get socket fd from CNI plugin */
>> - map_fd = get_cni_fd(internals->if_name);
>> + /* get socket fd from AF_XDP Device plugin */
>> + map_fd = get_xskmap_fd(internals->if_name, internals-
>>> uds_path);
>> if (map_fd < 0) {
>> - AF_XDP_LOG(ERR, "Failed to receive CNI plugin fd\n");
>> + AF_XDP_LOG(ERR, "Failed to receive AF_XDP Device
>> plugin fd\n");
>> goto out_xsk;
>> }
>> - /* get socket fd */
>> - fd = xsk_socket__fd(rxq->xsk);
>> - err = bpf_map_update_elem(map_fd, &rxq->xsk_queue_idx,
>> &fd, 0);
>> +
>> + err = xsk_socket__update_xskmap(rxq->xsk, map_fd);
>> if (err) {
>> AF_XDP_LOG(ERR, "Failed to insert unprivileged xsk in
>> map.\n");
>> goto out_xsk;
>> @@ -1881,13 +1879,13 @@ static const struct eth_dev_ops ops = {
>> .get_monitor_addr = eth_get_monitor_addr,
>> };
>>
>> -/* CNI option works in unprivileged container environment
>> - * and ethernet device functionality will be reduced. So
>> - * additional customiszed eth_dev_ops struct is needed
>> - * for cni. Promiscuous enable and disable functionality
>> - * is removed.
>> - **/
>> -static const struct eth_dev_ops ops_cni = {
>> +/* AF_XDP Device Plugin option works in unprivileged
>> + * container environment and ethernet device functionality
>> + * will be reduced. So additional customized eth_dev_ops
>> + * struct is needed for the AF_XDP Device Plugin. Promiscuous
>> + * enable and disable functionality is removed.
>> + */
>> +static const struct eth_dev_ops ops_afxdp_dp = {
>> .dev_start = eth_dev_start,
>> .dev_stop = eth_dev_stop,
>> .dev_close = eth_dev_close,
>> @@ -1957,7 +1955,7 @@ parse_name_arg(const char *key __rte_unused,
>>
>> /** parse xdp prog argument */
>> static int
>> -parse_prog_arg(const char *key __rte_unused,
>> +parse_path_arg(const char *key __rte_unused,
>> const char *value, void *extra_args)
>> {
>> char *path = extra_args;
>> @@ -2023,7 +2021,7 @@ xdp_get_channels_info(const char *if_name, int
>> *max_queues,
>> static int
>> parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
>> int *queue_cnt, int *shared_umem, char *prog_path,
>> - int *busy_budget, int *force_copy, int *use_cni)
>> + int *busy_budget, int *force_copy, char *uds_path)
>> {
>> int ret;
>>
>> @@ -2050,7 +2048,7 @@ parse_parameters(struct rte_kvargs *kvlist, char
>> *if_name, int *start_queue,
>> goto free_kvlist;
>>
>> ret = rte_kvargs_process(kvlist, ETH_AF_XDP_PROG_ARG,
>> - &parse_prog_arg, prog_path);
>> + &parse_path_arg, prog_path);
>> if (ret < 0)
>> goto free_kvlist;
>>
>> @@ -2064,8 +2062,8 @@ parse_parameters(struct rte_kvargs *kvlist, char
>> *if_name, int *start_queue,
>> if (ret < 0)
>> goto free_kvlist;
>>
>> - ret = rte_kvargs_process(kvlist, ETH_AF_XDP_USE_CNI_ARG,
>> - &parse_integer_arg, use_cni);
>> + ret = rte_kvargs_process(kvlist,
>> ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
>> + &parse_path_arg, uds_path);
>> if (ret < 0)
>> goto free_kvlist;
>>
>> @@ -2108,7 +2106,7 @@ static struct rte_eth_dev *
>> init_internals(struct rte_vdev_device *dev, const char *if_name,
>> int start_queue_idx, int queue_cnt, int shared_umem,
>> const char *prog_path, int busy_budget, int force_copy,
>> - int use_cni)
>> + const char *uds_path)
>> {
>> const char *name = rte_vdev_device_name(dev);
>> const unsigned int numa_node = dev->device.numa_node;
>> @@ -2137,7 +2135,7 @@ init_internals(struct rte_vdev_device *dev, const
>> char *if_name,
>> #endif
>> internals->shared_umem = shared_umem;
>> internals->force_copy = force_copy;
>> - internals->use_cni = use_cni;
>> + strlcpy(internals->uds_path, uds_path, PATH_MAX);
>>
>> if (xdp_get_channels_info(if_name, &internals->max_queue_cnt,
>> &internals->combined_queue_cnt)) {
>> @@ -2196,10 +2194,10 @@ init_internals(struct rte_vdev_device *dev, const
>> char *if_name,
>> eth_dev->data->dev_link = pmd_link;
>> eth_dev->data->mac_addrs = &internals->eth_addr;
>> eth_dev->data->dev_flags |=
>> RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
>> - if (!internals->use_cni)
>> + if (!strnlen(internals->uds_path, PATH_MAX))
>> eth_dev->dev_ops = &ops;
>> else
>> - eth_dev->dev_ops = &ops_cni;
>> + eth_dev->dev_ops = &ops_afxdp_dp;
>>
>> eth_dev->rx_pkt_burst = eth_af_xdp_rx;
>> eth_dev->tx_pkt_burst = eth_af_xdp_tx;
>> @@ -2327,7 +2325,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
>> *dev)
>> char prog_path[PATH_MAX] = {'\0'};
>> int busy_budget = -1, ret;
>> int force_copy = 0;
>> - int use_cni = 0;
>> + char uds_path[PATH_MAX] = {'\0'};
>> struct rte_eth_dev *eth_dev = NULL;
>> const char *name = rte_vdev_device_name(dev);
>>
>> @@ -2370,20 +2368,20 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
>> *dev)
>>
>> if (parse_parameters(kvlist, if_name, &xsk_start_queue_idx,
>> &xsk_queue_cnt, &shared_umem, prog_path,
>> - &busy_budget, &force_copy, &use_cni) < 0) {
>> + &busy_budget, &force_copy, uds_path) < 0) {
>> AF_XDP_LOG(ERR, "Invalid kvargs value\n");
>> return -EINVAL;
>> }
>>
>> - if (use_cni && busy_budget > 0) {
>> + if (strnlen(uds_path, PATH_MAX) && busy_budget > 0) {
>> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
>> parameter is not valid\n",
>> - ETH_AF_XDP_USE_CNI_ARG,
>> ETH_AF_XDP_BUDGET_ARG);
>> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
>> ETH_AF_XDP_BUDGET_ARG);
>> return -EINVAL;
>> }
>>
>> - if (use_cni && strnlen(prog_path, PATH_MAX)) {
>> + if (strnlen(uds_path, PATH_MAX) && strnlen(prog_path, PATH_MAX))
>> {
>> AF_XDP_LOG(ERR, "When '%s' parameter is used, '%s'
>> parameter is not valid\n",
>> - ETH_AF_XDP_USE_CNI_ARG,
>> ETH_AF_XDP_PROG_ARG);
>> + ETH_AF_XDP_USE_DP_UDS_PATH_ARG,
>> ETH_AF_XDP_PROG_ARG);
>> return -EINVAL;
>> }
>>
>> @@ -2410,7 +2408,7 @@ rte_pmd_af_xdp_probe(struct rte_vdev_device
>> *dev)
>>
>> eth_dev = init_internals(dev, if_name, xsk_start_queue_idx,
>> xsk_queue_cnt, shared_umem, prog_path,
>> - busy_budget, force_copy, use_cni);
>> + busy_budget, force_copy, uds_path);
>> if (eth_dev == NULL) {
>> AF_XDP_LOG(ERR, "Failed to init internals\n");
>> return -1;
>> @@ -2471,4 +2469,4 @@ RTE_PMD_REGISTER_PARAM_STRING(net_af_xdp,
>> "xdp_prog=<string> "
>> "busy_budget=<int> "
>> "force_copy=<int> "
>> - "use_cni=<int> ");
>> + "uds_path=<string> ");
>> --
>> 2.41.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-12-15 10:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-13 12:24 [v4] net/af_xdp: enable uds_path instead of use_cni Maryam Tahhan
2023-12-15 9:55 ` Loftus, Ciara
2023-12-15 10:26 ` Maryam Tahhan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).