From: <skori@marvell.com>
To: Sunil Kumar Kori <skori@marvell.com>,
Rakesh Kudurumalla <rkudurumalla@marvell.com>
Cc: <dev@dpdk.org>
Subject: [PATCH] doc: update command scope information
Date: Mon, 8 Jan 2024 13:04:15 +0530 [thread overview]
Message-ID: <20240108073415.1987009-1-skori@marvell.com> (raw)
From: Sunil Kumar Kori <skori@marvell.com>
Set of CLI commands are classified into following types;
- Commands which must be used in script only.
- Commands which must be used via telnet session only.
- Commands which can be used either in script or via telnet session.
Rename "Dynamic" column to "Scope" to provide clear scope of commands.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
---
doc/guides/tools/graph.rst | 211 +++++++++++++++++++------------------
1 file changed, 108 insertions(+), 103 deletions(-)
diff --git a/doc/guides/tools/graph.rst b/doc/guides/tools/graph.rst
index 1855d12891..6c559afe35 100644
--- a/doc/guides/tools/graph.rst
+++ b/doc/guides/tools/graph.rst
@@ -154,109 +154,114 @@ file to express the requested use case configuration.
.. table:: Exposed CLIs
:widths: auto
- +--------------------------------------+-----------------------------------+---------+----------+
- | Command | Description | Dynamic | Optional |
- +======================================+===================================+=========+==========+
- | | graph <usecases> [bsz <size>] | | Command to express the desired | No | No |
- | | [tmo <ns>] [coremask <bitmask>] | | use case. Also enables/disable | | |
- | | model <rtc/mcd/default> pcap_enable| | pcap capturing. | | |
- | | <0/1> num_pcap_pkts <num> pcap_file| | | |
- | | <output_capture_file> | | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | graph start | | Command to start the graph. | No | No |
- | | | This command triggers that no | | |
- | | | more commands are left to be | | |
- | | | parsed and graph initialization | | |
- | | | can be started now. It must be | | |
- | | | the last command in usecase.cli | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | graph stats show | | Command to dump current graph | Yes | Yes |
- | | | statistics. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help graph | | Command to dump graph help | Yes | Yes |
- | | | message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | mempool <mempool_name> size | | Command to create mempool which | No | No |
- | | <mbuf_size> buffers | | will be further associated to | | |
- | | <number_of_buffers> | | RxQ to dequeue the packets. | | |
- | | cache <cache_size> numa <numa_id> | | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help mempool | | Command to dump mempool help | Yes | Yes |
- | | | message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ethdev <ethdev_name> rxq <n_queues>| | Command to create DPDK port with| No | No |
- | | txq <n_queues> <mempool_name> | | given number of Rx and Tx queues| | |
- | | | . Also attach RxQ with given | | |
- | | | mempool. Each port can have | | |
- | | | single mempool only i.e. all | | |
- | | | RxQs will share the same mempool| | |
- | | | . | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | ethdev <ethdev_name> mtu <mtu_sz> | | Command to configure MTU of DPDK| Yes | Yes |
- | | | port. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ethdev <ethdev_name> promiscuous | | Command to enable/disable | Yes | Yes |
- | | <on/off> | | promiscuous mode on DPDK port. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | ethdev <ethdev_name> show | | Command to dump current ethdev | Yes | Yes |
- | | | configuration. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | ethdev <ethdev_name> stats | | Command to dump current ethdev | Yes | Yes |
- | | | statistics. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ethdev <ethdev_name> ip4 addr add | | Command to configure IPv4 | Yes | Yes |
- | | <ip> netmask <mask> | | address on given PCI device. It | | |
- | | | is needed if user wishes to use | | |
- | | | ``ipv4_lookup`` node. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ethdev <ethdev_name> ip6 addr add | | Command to configure IPv6 | Yes | Yes |
- | | <ip> netmask <mask> | | address on given PCI device. It | | |
- | | | is needed if user wishes to use | | |
- | | | ``ipv6_lookup`` node. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help ethdev | | Command to dump ethdev help | Yes | Yes |
- | | | message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ipv4_lookup route add ipv4 <ip> | | Command to add a route into | Yes | Yes |
- | | netmask <mask> via <ip> | | ``ipv4_lookup`` LPM table. It is| | |
- | | | needed if user wishes to route | | |
- | | | the packets based on LPM lookup | | |
- | | | table. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help ipv4_lookup | | Command to dump ``ipv4_lookup`` | Yes | Yes |
- | | | help message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ipv6_lookup route add ipv6 <ip> | | Command to add a route into | Yes | Yes |
- | | netmask <mask> via <ip> | | ``ipv6_lookup`` LPM table. It is| | |
- | | | needed if user wishes to route | | |
- | | | the packets based on LPM6 lookup| | |
- | | | table. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help ipv6_lookup | | Command to dump ``ipv6_lookup`` | Yes | Yes |
- | | | help message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | neigh add ipv4 <ip> <mac> | | Command to add a neighbour | Yes | Yes |
- | | | information into | | |
- | | | ``ipv4_rewrite`` node. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | neigh add ipv6 <ip> <mac> | | Command to add a neighbour | Yes | Yes |
- | | | information into | | |
- | | | ``ipv6_rewrite`` node. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help neigh | | Command to dump neigh help | Yes | Yes |
- | | | message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | | ethdev_rx map port <ethdev_name> | | Command to add port-queue-core | No | No |
- | | queue <q_num> core <core_id> | | mapping to ``ethdev_rx`` node. | | |
- | | | ``ethdev_rx`` node instance will| | |
- | | | be pinned on given core and will| | |
- | | | poll on requested port/queue | | |
- | | | pair. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
- | help ethdev_rx | | Command to dump ethdev_rx help | Yes | Yes |
- | | | message. | | |
- +--------------------------------------+-----------------------------------+---------+----------+
-
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | Command | Description | Scope | Optional |
+ +======================================+===================================+===================+==========+
+ | | graph <usecases> [bsz <size>] | | Command to express the desired | :ref:`1 <scopes>` | No |
+ | | [tmo <ns>] [coremask <bitmask>] | | use case. Also enables/disable | | |
+ | | model <rtc/mcd/default> pcap_enable| | pcap capturing. | | |
+ | | <0/1> num_pcap_pkts <num> pcap_file| | | |
+ | | <output_capture_file> | | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | graph start | | Command to start the graph. | :ref:`1 <scopes>` | No |
+ | | | This command triggers that no | | |
+ | | | more commands are left to be | | |
+ | | | parsed and graph initialization | | |
+ | | | can be started now. It must be | | |
+ | | | the last command in usecase.cli | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | graph stats show | | Command to dump current graph | :ref:`2 <scopes>` | Yes |
+ | | | statistics. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help graph | | Command to dump graph help | :ref:`2 <scopes>` | Yes |
+ | | | message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | mempool <mempool_name> size | | Command to create mempool which | :ref:`1 <scopes>` | No |
+ | | <mbuf_size> buffers | | will be further associated to | | |
+ | | <number_of_buffers> | | RxQ to dequeue the packets. | | |
+ | | cache <cache_size> numa <numa_id> | | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help mempool | | Command to dump mempool help | :ref:`2 <scopes>` | Yes |
+ | | | message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ethdev <ethdev_name> rxq <n_queues>| | Command to create DPDK port with| :ref:`1 <scopes>` | No |
+ | | txq <n_queues> <mempool_name> | | given number of Rx and Tx queues| | |
+ | | | . Also attach RxQ with given | | |
+ | | | mempool. Each port can have | | |
+ | | | single mempool only i.e. all | | |
+ | | | RxQs will share the same mempool| | |
+ | | | . | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | ethdev <ethdev_name> mtu <mtu_sz> | | Command to configure MTU of DPDK| :ref:`3 <scopes>` | Yes |
+ | | | port. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ethdev <ethdev_name> promiscuous | | Command to enable/disable | :ref:`3 <scopes>` | Yes |
+ | | <on/off> | | promiscuous mode on DPDK port. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | ethdev <ethdev_name> show | | Command to dump current ethdev | :ref:`2 <scopes>` | Yes |
+ | | | configuration. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | ethdev <ethdev_name> stats | | Command to dump current ethdev | :ref:`2 <scopes>` | Yes |
+ | | | statistics. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ethdev <ethdev_name> ip4 addr add | | Command to configure IPv4 | :ref:`3 <scopes>` | Yes |
+ | | <ip> netmask <mask> | | address on given PCI device. It | | |
+ | | | is needed if user wishes to use | | |
+ | | | ``ipv4_lookup`` node. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ethdev <ethdev_name> ip6 addr add | | Command to configure IPv6 | :ref:`3 <scopes>` | Yes |
+ | | <ip> netmask <mask> | | address on given PCI device. It | | |
+ | | | is needed if user wishes to use | | |
+ | | | ``ipv6_lookup`` node. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help ethdev | | Command to dump ethdev help | :ref:`2 <scopes>` | Yes |
+ | | | message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ipv4_lookup route add ipv4 <ip> | | Command to add a route into | :ref:`3 <scopes>` | Yes |
+ | | netmask <mask> via <ip> | | ``ipv4_lookup`` LPM table. It is| | |
+ | | | needed if user wishes to route | | |
+ | | | the packets based on LPM lookup | | |
+ | | | table. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help ipv4_lookup | | Command to dump ``ipv4_lookup`` | :ref:`2 <scopes>` | Yes |
+ | | | help message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ipv6_lookup route add ipv6 <ip> | | Command to add a route into | :ref:`3 <scopes>` | Yes |
+ | | netmask <mask> via <ip> | | ``ipv6_lookup`` LPM table. It is| | |
+ | | | needed if user wishes to route | | |
+ | | | the packets based on LPM6 lookup| | |
+ | | | table. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help ipv6_lookup | | Command to dump ``ipv6_lookup`` | :ref:`2 <scopes>` | Yes |
+ | | | help message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | neigh add ipv4 <ip> <mac> | | Command to add a neighbour | :ref:`3 <scopes>` | Yes |
+ | | | information into | | |
+ | | | ``ipv4_rewrite`` node. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | neigh add ipv6 <ip> <mac> | | Command to add a neighbour | :ref:`3 <scopes>` | Yes |
+ | | | information into | | |
+ | | | ``ipv6_rewrite`` node. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help neigh | | Command to dump neigh help | :ref:`2 <scopes>` | Yes |
+ | | | message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | | ethdev_rx map port <ethdev_name> | | Command to add port-queue-core | :ref:`1 <scopes>` | No |
+ | | queue <q_num> core <core_id> | | mapping to ``ethdev_rx`` node. | | |
+ | | | ``ethdev_rx`` node instance will| | |
+ | | | be pinned on given core and will| | |
+ | | | poll on requested port/queue | | |
+ | | | pair. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+ | help ethdev_rx | | Command to dump ethdev_rx help | :ref:`2 <scopes>` | Yes |
+ | | | message. | | |
+ +--------------------------------------+-----------------------------------+-------------------+----------+
+
+.. _scopes:
+
+1. Script only
+2. Telnet only
+3. Script and telnet both
Runtime configuration
---------------------
--
2.25.1
next reply other threads:[~2024-01-08 7:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 7:34 skori [this message]
2024-01-17 10:58 ` Rakesh Kudurumalla
2024-03-07 10:06 ` [PATCH v2 1/1] " skori
2024-03-07 10:08 ` Sunil Kumar Kori
2024-03-21 17:06 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240108073415.1987009-1-skori@marvell.com \
--to=skori@marvell.com \
--cc=dev@dpdk.org \
--cc=rkudurumalla@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).