From: Harman Kalra <hkalra@marvell.com>
To: Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>,
Harman Kalra <hkalra@marvell.com>
Cc: <dev@dpdk.org>
Subject: [PATCH v5 03/23] net/cnxk: eswitch HW resource configuration
Date: Sat, 2 Mar 2024 00:44:30 +0530 [thread overview]
Message-ID: <20240301191451.57168-4-hkalra@marvell.com> (raw)
In-Reply-To: <20240301191451.57168-1-hkalra@marvell.com>
Configuring the hardware resources used by the eswitch device.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
---
drivers/net/cnxk/cnxk_eswitch.c | 217 +++++++++++++++++++++++++++++++-
1 file changed, 216 insertions(+), 1 deletion(-)
diff --git a/drivers/net/cnxk/cnxk_eswitch.c b/drivers/net/cnxk/cnxk_eswitch.c
index 8f216d7c88..810e7c9c25 100644
--- a/drivers/net/cnxk/cnxk_eswitch.c
+++ b/drivers/net/cnxk/cnxk_eswitch.c
@@ -6,13 +6,53 @@
#define CNXK_NIX_DEF_SQ_COUNT 512
+static int
+eswitch_hw_rsrc_cleanup(struct cnxk_eswitch_dev *eswitch_dev, struct rte_pci_device *pci_dev)
+{
+ struct roc_nix *nix;
+ int rc = 0;
+
+ nix = &eswitch_dev->nix;
+
+ roc_nix_unregister_queue_irqs(nix);
+ roc_nix_tm_fini(nix);
+ rc = roc_nix_lf_free(nix);
+ if (rc) {
+ plt_err("Failed to cleanup sq, rc %d", rc);
+ goto exit;
+ }
+
+ /* Check if this device is hosting common resource */
+ nix = roc_idev_npa_nix_get();
+ if (!nix || nix->pci_dev != pci_dev) {
+ rc = 0;
+ goto exit;
+ }
+
+ /* Try nix fini now */
+ rc = roc_nix_dev_fini(nix);
+ if (rc == -EAGAIN) {
+ plt_info("Common resource in use by other devices %s", pci_dev->name);
+ goto exit;
+ } else if (rc) {
+ plt_err("Failed in nix dev fini, rc=%d", rc);
+ goto exit;
+ }
+
+ rte_free(eswitch_dev->txq);
+ rte_free(eswitch_dev->rxq);
+ rte_free(eswitch_dev->cxq);
+
+exit:
+ return rc;
+}
+
static int
cnxk_eswitch_dev_remove(struct rte_pci_device *pci_dev)
{
struct cnxk_eswitch_dev *eswitch_dev;
int rc = 0;
- PLT_SET_USED(pci_dev);
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
@@ -22,6 +62,9 @@ cnxk_eswitch_dev_remove(struct rte_pci_device *pci_dev)
goto exit;
}
+ /* Cleanup HW resources */
+ eswitch_hw_rsrc_cleanup(eswitch_dev, pci_dev);
+
rte_free(eswitch_dev);
exit:
return rc;
@@ -318,6 +361,170 @@ cnxk_eswitch_txq_setup(struct cnxk_eswitch_dev *eswitch_dev, uint16_t qid, uint1
return rc;
}
+static int
+nix_lf_setup(struct cnxk_eswitch_dev *eswitch_dev)
+{
+ uint16_t nb_rxq, nb_txq, nb_cq;
+ struct roc_nix_fc_cfg fc_cfg;
+ struct roc_nix *nix;
+ uint64_t rx_cfg;
+ void *qs;
+ int rc;
+
+ /* Initialize base roc nix */
+ nix = &eswitch_dev->nix;
+ nix->pci_dev = eswitch_dev->pci_dev;
+ nix->hw_vlan_ins = true;
+ nix->reta_sz = ROC_NIX_RSS_RETA_SZ_256;
+ rc = roc_nix_dev_init(nix);
+ if (rc) {
+ plt_err("Failed to init nix eswitch device, rc=%d(%s)", rc, roc_error_msg_get(rc));
+ goto fail;
+ }
+
+ /* Get the representors count */
+ rc = roc_nix_max_rep_count(&eswitch_dev->nix);
+ if (rc) {
+ plt_err("Failed to get rep cnt, rc=%d(%s)", rc, roc_error_msg_get(rc));
+ goto free_cqs;
+ }
+
+ /* Allocating an NIX LF */
+ nb_rxq = CNXK_ESWITCH_MAX_RXQ;
+ nb_txq = CNXK_ESWITCH_MAX_TXQ;
+ nb_cq = CNXK_ESWITCH_MAX_RXQ;
+ rx_cfg = ROC_NIX_LF_RX_CFG_DIS_APAD;
+ rc = roc_nix_lf_alloc(nix, nb_rxq, nb_txq, rx_cfg);
+ if (rc) {
+ plt_err("lf alloc failed = %s(%d)", roc_error_msg_get(rc), rc);
+ goto dev_fini;
+ }
+
+ if (nb_rxq) {
+ /* Allocate memory for eswitch rq's and cq's */
+ qs = plt_zmalloc(sizeof(struct cnxk_eswitch_rxq) * nb_rxq, 0);
+ if (!qs) {
+ plt_err("Failed to alloc eswitch rxq");
+ goto lf_free;
+ }
+ eswitch_dev->rxq = qs;
+ }
+
+ if (nb_txq) {
+ /* Allocate memory for roc sq's */
+ qs = plt_zmalloc(sizeof(struct cnxk_eswitch_txq) * nb_txq, 0);
+ if (!qs) {
+ plt_err("Failed to alloc eswitch txq");
+ goto free_rqs;
+ }
+ eswitch_dev->txq = qs;
+ }
+
+ if (nb_cq) {
+ qs = plt_zmalloc(sizeof(struct cnxk_eswitch_cxq) * nb_cq, 0);
+ if (!qs) {
+ plt_err("Failed to alloc eswitch cxq");
+ goto free_sqs;
+ }
+ eswitch_dev->cxq = qs;
+ }
+
+ eswitch_dev->nb_rxq = nb_rxq;
+ eswitch_dev->nb_txq = nb_txq;
+
+ /* Re-enable NIX LF error interrupts */
+ roc_nix_err_intr_ena_dis(nix, true);
+ roc_nix_ras_intr_ena_dis(nix, true);
+
+ rc = roc_nix_lso_fmt_setup(nix);
+ if (rc) {
+ plt_err("lso setup failed = %s(%d)", roc_error_msg_get(rc), rc);
+ goto free_cqs;
+ }
+
+ rc = roc_nix_switch_hdr_set(nix, 0, 0, 0, 0);
+ if (rc) {
+ plt_err("switch hdr set failed = %s(%d)", roc_error_msg_get(rc), rc);
+ goto free_cqs;
+ }
+
+ rc = roc_nix_tm_init(nix);
+ if (rc) {
+ plt_err("tm failed = %s(%d)", roc_error_msg_get(rc), rc);
+ goto free_cqs;
+ }
+
+ /* Register queue IRQs */
+ rc = roc_nix_register_queue_irqs(nix);
+ if (rc) {
+ plt_err("Failed to register queue interrupts rc=%d", rc);
+ goto tm_fini;
+ }
+
+ /* Enable default tree */
+ rc = roc_nix_tm_hierarchy_enable(nix, ROC_NIX_TM_DEFAULT, false);
+ if (rc) {
+ plt_err("tm default hierarchy enable failed = %s(%d)", roc_error_msg_get(rc), rc);
+ goto q_irq_fini;
+ }
+
+ memset(&fc_cfg, 0, sizeof(struct roc_nix_fc_cfg));
+ fc_cfg.rxchan_cfg.enable = false;
+ rc = roc_nix_fc_config_set(nix, &fc_cfg);
+ if (rc) {
+ plt_err("Failed to setup flow control, rc=%d(%s)", rc, roc_error_msg_get(rc));
+ goto q_irq_fini;
+ }
+
+ roc_nix_fc_mode_get(nix);
+
+ return rc;
+q_irq_fini:
+ roc_nix_unregister_queue_irqs(nix);
+tm_fini:
+ roc_nix_tm_fini(nix);
+free_cqs:
+ rte_free(eswitch_dev->cxq);
+free_sqs:
+ rte_free(eswitch_dev->txq);
+free_rqs:
+ rte_free(eswitch_dev->rxq);
+lf_free:
+ roc_nix_lf_free(nix);
+dev_fini:
+ roc_nix_dev_fini(nix);
+fail:
+ return rc;
+}
+
+static int
+eswitch_hw_rsrc_setup(struct cnxk_eswitch_dev *eswitch_dev, struct rte_pci_device *pci_dev)
+{
+ struct roc_nix *nix;
+ int rc;
+
+ nix = &eswitch_dev->nix;
+ rc = nix_lf_setup(eswitch_dev);
+ if (rc) {
+ plt_err("Failed to setup hw rsrc, rc=%d(%s)", rc, roc_error_msg_get(rc));
+ goto fail;
+ }
+
+ /* Initialize roc npc */
+ eswitch_dev->npc.roc_nix = nix;
+ eswitch_dev->npc.flow_max_priority = 3;
+ eswitch_dev->npc.flow_prealloc_size = 1;
+ rc = roc_npc_init(&eswitch_dev->npc);
+ if (rc)
+ goto rsrc_cleanup;
+
+ return rc;
+rsrc_cleanup:
+ eswitch_hw_rsrc_cleanup(eswitch_dev, pci_dev);
+fail:
+ return rc;
+}
+
static int
cnxk_eswitch_dev_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
{
@@ -347,6 +554,12 @@ cnxk_eswitch_dev_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pc
eswitch_dev = mz->addr;
eswitch_dev->pci_dev = pci_dev;
+
+ rc = eswitch_hw_rsrc_setup(eswitch_dev, pci_dev);
+ if (rc) {
+ plt_err("Failed to setup hw rsrc, rc=%d(%s)", rc, roc_error_msg_get(rc));
+ goto free_mem;
+ }
}
/* Spinlock for synchronization between representors traffic and control
@@ -355,6 +568,8 @@ cnxk_eswitch_dev_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pc
rte_spinlock_init(&eswitch_dev->rep_lock);
return rc;
+free_mem:
+ rte_memzone_free(mz);
fail:
return rc;
}
--
2.18.0
next prev parent reply other threads:[~2024-03-01 19:15 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-11 16:34 [PATCH 0/9] net/cnxk: support for port representors Harman Kalra
2023-08-11 16:34 ` [PATCH 1/9] common/cnxk: debug log type for representors Harman Kalra
2023-08-11 16:34 ` [PATCH 2/9] net/cnxk: probing representor ports Harman Kalra
2023-08-11 16:34 ` [PATCH 3/9] common/cnxk: maintaining representor state Harman Kalra
2023-08-11 16:34 ` [PATCH 4/9] net/cnxk: callbacks for " Harman Kalra
2023-08-11 16:34 ` [PATCH 5/9] net/cnxk: add representor control plane Harman Kalra
2023-08-11 16:34 ` [PATCH 6/9] net/cnxk: representor ethdev ops Harman Kalra
2023-08-11 16:34 ` [PATCH 7/9] net/cnxk: representor flow ops Harman Kalra
2023-08-11 16:34 ` [PATCH 8/9] common/cnxk: support represented port for cnxk Harman Kalra
2023-08-11 16:34 ` [PATCH 9/9] net/cnxk: add " Harman Kalra
2023-12-19 17:39 ` [PATCH v2 00/24] net/cnxk: support for port representors Harman Kalra
2023-12-19 17:39 ` [PATCH v2 01/24] common/cnxk: add support for representors Harman Kalra
2023-12-19 17:39 ` [PATCH v2 02/24] net/cnxk: implementing eswitch device Harman Kalra
2024-01-04 12:30 ` Jerin Jacob
2023-12-19 17:39 ` [PATCH v2 03/24] net/cnxk: eswitch HW resource configuration Harman Kalra
2024-01-04 12:34 ` Jerin Jacob
2023-12-19 17:39 ` [PATCH v2 04/24] net/cnxk: eswitch devargs parsing Harman Kalra
2023-12-19 17:39 ` [PATCH v2 05/24] net/cnxk: probing representor ports Harman Kalra
2023-12-19 17:39 ` [PATCH v2 06/24] common/cnxk: common NPC changes for eswitch Harman Kalra
2023-12-19 17:39 ` [PATCH v2 07/24] common/cnxk: interface to update VLAN TPID Harman Kalra
2024-01-04 12:47 ` Jerin Jacob
2023-12-19 17:39 ` [PATCH v2 08/24] net/cnxk: eswitch flow configurations Harman Kalra
2023-12-19 17:39 ` [PATCH v2 09/24] net/cnxk: eswitch fastpath routines Harman Kalra
2023-12-19 17:39 ` [PATCH v2 10/24] net/cnxk: add representor control plane Harman Kalra
2023-12-19 17:39 ` [PATCH v2 11/24] common/cnxk: representee notification callback Harman Kalra
2023-12-19 17:39 ` [PATCH v2 12/24] net/cnxk: handling representee notification Harman Kalra
2023-12-19 17:39 ` [PATCH v2 13/24] net/cnxk: representor ethdev ops Harman Kalra
2023-12-19 17:39 ` [PATCH v2 14/24] common/cnxk: get representees ethernet stats Harman Kalra
2023-12-19 17:39 ` [PATCH v2 15/24] net/cnxk: ethernet statistic for representor Harman Kalra
2023-12-19 17:39 ` [PATCH v2 16/24] common/cnxk: base support for eswitch VF Harman Kalra
2023-12-19 17:39 ` [PATCH v2 17/24] net/cnxk: eswitch VF as ethernet device Harman Kalra
2023-12-19 17:39 ` [PATCH v2 18/24] common/cnxk: support port representor and represented port Harman Kalra
2023-12-19 17:39 ` [PATCH v2 19/24] net/cnxk: add represented port pattern and action Harman Kalra
2023-12-19 17:39 ` [PATCH v2 20/24] net/cnxk: add port representor " Harman Kalra
2023-12-19 17:40 ` [PATCH v2 21/24] net/cnxk: generalize flow operation APIs Harman Kalra
2023-12-19 17:40 ` [PATCH v2 22/24] net/cnxk: flow create on representor ports Harman Kalra
2023-12-19 17:40 ` [PATCH v2 23/24] net/cnxk: other flow operations Harman Kalra
2023-12-19 17:40 ` [PATCH v2 24/24] doc: port representors in cnxk Harman Kalra
2023-12-20 9:37 ` Thomas Monjalon
2023-12-21 13:28 ` [EXT] " Harman Kalra
2023-12-21 18:33 ` Thomas Monjalon
2024-01-11 6:48 ` Harman Kalra
2024-02-01 13:07 ` [PATCH v3 00/23] net/cnxk: support for port representors Harman Kalra
2024-02-01 13:07 ` [PATCH v3 01/23] common/cnxk: add support for representors Harman Kalra
2024-02-01 13:07 ` [PATCH v3 02/23] net/cnxk: implementing eswitch device Harman Kalra
2024-02-01 13:07 ` [PATCH v3 03/23] net/cnxk: eswitch HW resource configuration Harman Kalra
2024-02-01 13:07 ` [PATCH v3 04/23] net/cnxk: eswitch devargs parsing Harman Kalra
2024-02-01 13:07 ` [PATCH v3 05/23] net/cnxk: probing representor ports Harman Kalra
2024-02-01 13:07 ` [PATCH v3 06/23] common/cnxk: common NPC changes for eswitch Harman Kalra
2024-02-01 13:07 ` [PATCH v3 07/23] common/cnxk: interface to update VLAN TPID Harman Kalra
2024-02-01 13:07 ` [PATCH v3 08/23] net/cnxk: eswitch flow configurations Harman Kalra
2024-02-01 13:07 ` [PATCH v3 09/23] net/cnxk: eswitch fastpath routines Harman Kalra
2024-02-01 13:07 ` [PATCH v3 10/23] net/cnxk: add representor control plane Harman Kalra
2024-02-01 13:07 ` [PATCH v3 11/23] common/cnxk: representee notification callback Harman Kalra
2024-02-01 13:07 ` [PATCH v3 12/23] net/cnxk: handling representee notification Harman Kalra
2024-02-01 13:07 ` [PATCH v3 13/23] net/cnxk: representor ethdev ops Harman Kalra
2024-02-01 13:07 ` [PATCH v3 14/23] common/cnxk: get representees ethernet stats Harman Kalra
2024-02-01 13:07 ` [PATCH v3 15/23] net/cnxk: ethernet statistic for representor Harman Kalra
2024-02-01 13:07 ` [PATCH v3 16/23] common/cnxk: base support for eswitch VF Harman Kalra
2024-02-01 13:07 ` [PATCH v3 17/23] net/cnxk: eswitch VF as ethernet device Harman Kalra
2024-02-01 13:07 ` [PATCH v3 18/23] common/cnxk: support port representor and represented port Harman Kalra
2024-02-01 13:07 ` [PATCH v3 19/23] net/cnxk: add represented port pattern and action Harman Kalra
2024-02-01 13:07 ` [PATCH v3 20/23] net/cnxk: add representor " Harman Kalra
2024-02-01 13:07 ` [PATCH v3 21/23] net/cnxk: generalise flow operation APIs Harman Kalra
2024-02-01 13:07 ` [PATCH v3 22/23] net/cnxk: flow create on representor ports Harman Kalra
2024-02-01 13:07 ` [PATCH v3 23/23] net/cnxk: other flow operations Harman Kalra
2024-02-27 19:15 ` [PATCH v4 00/23] net/cnxk: support for port representors Harman Kalra
2024-02-27 19:15 ` [PATCH v4 01/23] common/cnxk: add support for representors Harman Kalra
2024-02-27 19:15 ` [PATCH v4 02/23] net/cnxk: implementing eswitch device Harman Kalra
2024-03-01 9:31 ` Jerin Jacob
2024-02-27 19:15 ` [PATCH v4 03/23] net/cnxk: eswitch HW resource configuration Harman Kalra
2024-02-27 19:15 ` [PATCH v4 04/23] net/cnxk: eswitch devargs parsing Harman Kalra
2024-02-27 19:15 ` [PATCH v4 05/23] net/cnxk: probing representor ports Harman Kalra
2024-02-27 19:15 ` [PATCH v4 06/23] common/cnxk: common NPC changes for eswitch Harman Kalra
2024-02-27 19:15 ` [PATCH v4 07/23] common/cnxk: interface to update VLAN TPID Harman Kalra
2024-02-27 19:15 ` [PATCH v4 08/23] net/cnxk: eswitch flow configurations Harman Kalra
2024-02-27 19:15 ` [PATCH v4 09/23] net/cnxk: eswitch fastpath routines Harman Kalra
2024-02-27 19:15 ` [PATCH v4 10/23] net/cnxk: add representor control plane Harman Kalra
2024-02-27 19:15 ` [PATCH v4 11/23] common/cnxk: representee notification callback Harman Kalra
2024-02-27 19:15 ` [PATCH v4 12/23] net/cnxk: handling representee notification Harman Kalra
2024-02-27 19:15 ` [PATCH v4 13/23] net/cnxk: representor ethdev ops Harman Kalra
2024-02-27 19:15 ` [PATCH v4 14/23] common/cnxk: get representees ethernet stats Harman Kalra
2024-02-27 19:15 ` [PATCH v4 15/23] net/cnxk: ethernet statistics for representor Harman Kalra
2024-02-27 19:15 ` [PATCH v4 16/23] common/cnxk: base support for eswitch VF Harman Kalra
2024-02-27 19:15 ` [PATCH v4 17/23] net/cnxk: eswitch VF as ethernet device Harman Kalra
2024-02-27 19:15 ` [PATCH v4 18/23] common/cnxk: support port representor and represented port Harman Kalra
2024-02-27 19:15 ` [PATCH v4 19/23] net/cnxk: add represented port pattern and action Harman Kalra
2024-02-27 19:15 ` [PATCH v4 20/23] net/cnxk: add representor " Harman Kalra
2024-02-27 19:15 ` [PATCH v4 21/23] net/cnxk: generalise flow operation APIs Harman Kalra
2024-02-27 19:15 ` [PATCH v4 22/23] net/cnxk: flow create on representor ports Harman Kalra
2024-02-27 19:15 ` [PATCH v4 23/23] net/cnxk: other flow operations Harman Kalra
2024-03-01 9:35 ` Jerin Jacob
2024-03-01 19:14 ` [PATCH v5 00/23] net/cnxk: support for port representors Harman Kalra
2024-03-01 19:14 ` [PATCH v5 01/23] common/cnxk: add support for representors Harman Kalra
2024-03-01 19:14 ` [PATCH v5 02/23] net/cnxk: implementing eswitch device Harman Kalra
2024-03-01 19:14 ` Harman Kalra [this message]
2024-03-01 19:14 ` [PATCH v5 04/23] net/cnxk: eswitch devargs parsing Harman Kalra
2024-03-01 19:14 ` [PATCH v5 05/23] net/cnxk: probing representor ports Harman Kalra
2024-03-01 19:14 ` [PATCH v5 06/23] common/cnxk: common NPC changes for eswitch Harman Kalra
2024-03-01 19:14 ` [PATCH v5 07/23] common/cnxk: interface to update VLAN TPID Harman Kalra
2024-03-01 19:14 ` [PATCH v5 08/23] net/cnxk: eswitch flow configurations Harman Kalra
2024-03-01 19:14 ` [PATCH v5 09/23] net/cnxk: eswitch fastpath routines Harman Kalra
2024-03-01 19:14 ` [PATCH v5 10/23] net/cnxk: add representor control plane Harman Kalra
2024-03-01 19:14 ` [PATCH v5 11/23] common/cnxk: representee notification callback Harman Kalra
2024-03-01 19:14 ` [PATCH v5 12/23] net/cnxk: handling representee notification Harman Kalra
2024-03-01 19:14 ` [PATCH v5 13/23] net/cnxk: representor ethdev ops Harman Kalra
2024-03-01 19:14 ` [PATCH v5 14/23] common/cnxk: get representees ethernet stats Harman Kalra
2024-03-01 19:14 ` [PATCH v5 15/23] net/cnxk: ethernet statistics for representor Harman Kalra
2024-03-01 19:14 ` [PATCH v5 16/23] common/cnxk: base support for eswitch VF Harman Kalra
2024-03-01 19:14 ` [PATCH v5 17/23] net/cnxk: eswitch VF as ethernet device Harman Kalra
2024-03-01 19:14 ` [PATCH v5 18/23] common/cnxk: support port representor and represented port Harman Kalra
2024-03-01 19:14 ` [PATCH v5 19/23] net/cnxk: add represented port pattern and action Harman Kalra
2024-03-01 19:14 ` [PATCH v5 20/23] net/cnxk: add representor " Harman Kalra
2024-03-01 19:14 ` [PATCH v5 21/23] net/cnxk: generalise flow operation APIs Harman Kalra
2024-03-03 14:50 ` Jerin Jacob
2024-03-01 19:14 ` [PATCH v5 22/23] net/cnxk: flow create on representor ports Harman Kalra
2024-03-01 19:14 ` [PATCH v5 23/23] net/cnxk: other flow operations Harman Kalra
2024-03-03 17:38 ` [PATCH v6 00/23] net/cnxk: support for port representors Harman Kalra
2024-03-03 17:38 ` [PATCH v6 01/23] common/cnxk: add support for representors Harman Kalra
2024-03-03 17:38 ` [PATCH v6 02/23] net/cnxk: implementing eswitch device Harman Kalra
2024-03-03 17:38 ` [PATCH v6 03/23] net/cnxk: eswitch HW resource configuration Harman Kalra
2024-03-03 17:38 ` [PATCH v6 04/23] net/cnxk: eswitch devargs parsing Harman Kalra
2024-03-03 17:38 ` [PATCH v6 05/23] net/cnxk: probing representor ports Harman Kalra
2024-03-03 17:38 ` [PATCH v6 06/23] common/cnxk: common NPC changes for eswitch Harman Kalra
2024-03-03 17:38 ` [PATCH v6 07/23] common/cnxk: interface to update VLAN TPID Harman Kalra
2024-03-03 17:38 ` [PATCH v6 08/23] net/cnxk: eswitch flow configurations Harman Kalra
2024-03-03 17:38 ` [PATCH v6 09/23] net/cnxk: eswitch fastpath routines Harman Kalra
2024-03-03 17:38 ` [PATCH v6 10/23] net/cnxk: add representor control plane Harman Kalra
2024-03-03 17:38 ` [PATCH v6 11/23] common/cnxk: representee notification callback Harman Kalra
2024-03-03 17:38 ` [PATCH v6 12/23] net/cnxk: handling representee notification Harman Kalra
2024-03-03 17:38 ` [PATCH v6 13/23] net/cnxk: representor ethdev ops Harman Kalra
2024-03-03 17:38 ` [PATCH v6 14/23] common/cnxk: get representees ethernet stats Harman Kalra
2024-03-03 17:38 ` [PATCH v6 15/23] net/cnxk: ethernet statistics for representor Harman Kalra
2024-03-03 17:38 ` [PATCH v6 16/23] common/cnxk: base support for eswitch VF Harman Kalra
2024-03-03 17:38 ` [PATCH v6 17/23] net/cnxk: eswitch VF as ethernet device Harman Kalra
2024-03-03 17:38 ` [PATCH v6 18/23] common/cnxk: support port representor and represented port Harman Kalra
2024-03-03 17:38 ` [PATCH v6 19/23] net/cnxk: add represented port pattern and action Harman Kalra
2024-03-03 17:38 ` [PATCH v6 20/23] net/cnxk: add representor " Harman Kalra
2024-03-03 17:38 ` [PATCH v6 21/23] net/cnxk: generalise flow operation APIs Harman Kalra
2024-03-03 17:38 ` [PATCH v6 22/23] net/cnxk: flow create on representor ports Harman Kalra
2024-03-03 17:38 ` [PATCH v6 23/23] net/cnxk: other flow operations Harman Kalra
2024-03-04 7:57 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301191451.57168-4-hkalra@marvell.com \
--to=hkalra@marvell.com \
--cc=dev@dpdk.org \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).