From: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
To: <gakhil@marvell.com>, <fanzhang.oss@gmail.com>, <ashishg@marvell.com>
Cc: <dev@dpdk.org>, Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Subject: [PATCH v5 2/7] drivers/compress: add Nitrox driver
Date: Sat, 2 Mar 2024 15:08:08 +0530 [thread overview]
Message-ID: <20240302093813.14922-3-rnagadheeraj@marvell.com> (raw)
In-Reply-To: <20240302093813.14922-1-rnagadheeraj@marvell.com>
Introduce Nitrox compressdev driver.
This patch implements below operations
- dev_configure
- dev_close
- dev_infos_get
- private_xform_create
- private_xform_free
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
---
MAINTAINERS | 7 +
doc/guides/compressdevs/features/nitrox.ini | 17 +
doc/guides/compressdevs/index.rst | 1 +
doc/guides/compressdevs/nitrox.rst | 50 +++
doc/guides/rel_notes/release_24_03.rst | 3 +
drivers/common/nitrox/meson.build | 1 +
drivers/common/nitrox/nitrox_device.c | 37 +-
drivers/common/nitrox/nitrox_device.h | 3 +
drivers/compress/meson.build | 1 +
drivers/compress/nitrox/meson.build | 15 +
drivers/compress/nitrox/nitrox_comp.c | 353 +++++++++++++++++++
drivers/compress/nitrox/nitrox_comp.h | 33 ++
drivers/compress/nitrox/nitrox_comp_reqmgr.h | 40 +++
13 files changed, 556 insertions(+), 5 deletions(-)
create mode 100644 doc/guides/compressdevs/features/nitrox.ini
create mode 100644 doc/guides/compressdevs/nitrox.rst
create mode 100644 drivers/compress/nitrox/meson.build
create mode 100644 drivers/compress/nitrox/nitrox_comp.c
create mode 100644 drivers/compress/nitrox/nitrox_comp.h
create mode 100644 drivers/compress/nitrox/nitrox_comp_reqmgr.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d6abebc55c..a6e2cf6eae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1215,6 +1215,13 @@ F: drivers/compress/isal/
F: doc/guides/compressdevs/isal.rst
F: doc/guides/compressdevs/features/isal.ini
+Marvell Nitrox
+M: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
+F: drivers/compress/nitrox/
+F: drivers/common/nitrox/
+F: doc/guides/compressdevs/nitrox.rst
+F: doc/guides/compressdevs/features/nitrox.ini
+
NVIDIA mlx5
M: Matan Azrad <matan@nvidia.com>
F: drivers/compress/mlx5/
diff --git a/doc/guides/compressdevs/features/nitrox.ini b/doc/guides/compressdevs/features/nitrox.ini
new file mode 100644
index 0000000000..1b6a96ac6d
--- /dev/null
+++ b/doc/guides/compressdevs/features/nitrox.ini
@@ -0,0 +1,17 @@
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'nitrox' compression driver.
+;
+[Features]
+HW Accelerated = Y
+Stateful Compression = Y
+Stateful Decompression = Y
+OOP SGL In SGL Out = Y
+OOP SGL In LB Out = Y
+OOP LB In SGL Out = Y
+Deflate = Y
+Adler32 = Y
+Crc32 = Y
+Fixed = Y
+Dynamic = Y
diff --git a/doc/guides/compressdevs/index.rst b/doc/guides/compressdevs/index.rst
index 54a3ef4273..849f211688 100644
--- a/doc/guides/compressdevs/index.rst
+++ b/doc/guides/compressdevs/index.rst
@@ -12,6 +12,7 @@ Compression Device Drivers
overview
isal
mlx5
+ nitrox
octeontx
qat_comp
zlib
diff --git a/doc/guides/compressdevs/nitrox.rst b/doc/guides/compressdevs/nitrox.rst
new file mode 100644
index 0000000000..840fd7241a
--- /dev/null
+++ b/doc/guides/compressdevs/nitrox.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2024 Marvell.
+
+Marvell NITROX Compression Poll Mode Driver
+===========================================
+
+The Nitrox compression poll mode driver provides support for offloading
+compression and decompression operations to the NITROX V processor.
+Detailed information about the NITROX V processor can be obtained here:
+
+* https://www.marvell.com/security-solutions/nitrox-security-processors/nitrox-v/
+
+Features
+--------
+
+NITROX V compression PMD has support for:
+
+Compression/Decompression algorithm:
+
+* DEFLATE
+
+Huffman code type:
+
+* FIXED
+* DYNAMIC
+
+Window size support:
+
+* Min - 2 bytes
+* Max - 32KB
+
+Checksum generation:
+
+* CRC32, Adler
+
+Limitations
+-----------
+
+* Compressdev level 0, no compression, is not supported.
+
+Initialization
+--------------
+
+Nitrox compression PMD depends on Nitrox kernel PF driver being installed on
+the platform. Nitrox PF driver is required to create VF devices which will
+be used by the PMD. Each VF device can enable one compressdev PMD.
+
+Nitrox kernel PF driver is available as part of CNN55XX-Driver SDK. The SDK
+and it's installation instructions can be obtained from:
+`Marvell Customer Portal <https://www.marvell.com/support/extranets.html>`_.
diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index 879bb4944c..bb91953a23 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -138,6 +138,9 @@ New Features
to support TLS v1.2, TLS v1.3 and DTLS v1.2.
* Added PMD API to allow raw submission of instructions to CPT.
+* **Added Marvell NITROX compression PMD.**
+
+ * Added support for DEFLATE compression and decompression.
Removed Items
-------------
diff --git a/drivers/common/nitrox/meson.build b/drivers/common/nitrox/meson.build
index 99fadbbfc9..f3cb42f006 100644
--- a/drivers/common/nitrox/meson.build
+++ b/drivers/common/nitrox/meson.build
@@ -16,3 +16,4 @@ sources += files(
)
includes += include_directories('../../crypto/nitrox')
+includes += include_directories('../../compress/nitrox')
diff --git a/drivers/common/nitrox/nitrox_device.c b/drivers/common/nitrox/nitrox_device.c
index b2f638ec8a..39edc440a7 100644
--- a/drivers/common/nitrox/nitrox_device.c
+++ b/drivers/common/nitrox/nitrox_device.c
@@ -7,6 +7,7 @@
#include "nitrox_device.h"
#include "nitrox_hal.h"
#include "nitrox_sym.h"
+#include "nitrox_comp.h"
#define PCI_VENDOR_ID_CAVIUM 0x177d
#define NITROX_V_PCI_VF_DEV_ID 0x13
@@ -67,7 +68,7 @@ nitrox_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pdev)
{
struct nitrox_device *ndev;
- int err;
+ int err = -1;
/* Nitrox CSR space */
if (!pdev->mem_resource[0].addr)
@@ -79,12 +80,20 @@ nitrox_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
ndev_init(ndev, pdev);
err = nitrox_sym_pmd_create(ndev);
- if (err) {
- ndev_release(ndev);
- return err;
- }
+ if (err)
+ goto sym_pmd_err;
+
+ err = nitrox_comp_pmd_create(ndev);
+ if (err)
+ goto comp_pmd_err;
return 0;
+
+comp_pmd_err:
+ nitrox_sym_pmd_destroy(ndev);
+sym_pmd_err:
+ ndev_release(ndev);
+ return err;
}
static int
@@ -101,6 +110,10 @@ nitrox_pci_remove(struct rte_pci_device *pdev)
if (err)
return err;
+ err = nitrox_comp_pmd_destroy(ndev);
+ if (err)
+ return err;
+
ndev_release(ndev);
return 0;
}
@@ -134,5 +147,19 @@ nitrox_sym_pmd_destroy(struct nitrox_device *ndev)
return 0;
}
+__rte_weak int
+nitrox_comp_pmd_create(struct nitrox_device *ndev)
+{
+ RTE_SET_USED(ndev);
+ return 0;
+}
+
+__rte_weak int
+nitrox_comp_pmd_destroy(struct nitrox_device *ndev)
+{
+ RTE_SET_USED(ndev);
+ return 0;
+}
+
RTE_PMD_REGISTER_PCI(nitrox, nitrox_pmd);
RTE_PMD_REGISTER_PCI_TABLE(nitrox, pci_id_nitrox_map);
diff --git a/drivers/common/nitrox/nitrox_device.h b/drivers/common/nitrox/nitrox_device.h
index b7c7ffd772..877bccb321 100644
--- a/drivers/common/nitrox/nitrox_device.h
+++ b/drivers/common/nitrox/nitrox_device.h
@@ -8,13 +8,16 @@
#include <bus_pci_driver.h>
struct nitrox_sym_device;
+struct nitrox_comp_device;
struct nitrox_device {
TAILQ_ENTRY(nitrox_device) next;
struct rte_pci_device *pdev;
uint8_t *bar_addr;
struct nitrox_sym_device *sym_dev;
+ struct nitrox_comp_device *comp_dev;
struct rte_device rte_sym_dev;
+ struct rte_device rte_comp_dev;
uint16_t nr_queues;
};
diff --git a/drivers/compress/meson.build b/drivers/compress/meson.build
index abe043ab94..b91195b27d 100644
--- a/drivers/compress/meson.build
+++ b/drivers/compress/meson.build
@@ -8,6 +8,7 @@ endif
drivers = [
'isal',
'mlx5',
+ 'nitrox',
'octeontx',
'zlib',
]
diff --git a/drivers/compress/nitrox/meson.build b/drivers/compress/nitrox/meson.build
new file mode 100644
index 0000000000..f137303689
--- /dev/null
+++ b/drivers/compress/nitrox/meson.build
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2024 Marvell.
+
+if not is_linux
+ build = false
+ reason = 'only supported on Linux'
+endif
+
+deps += ['common_nitrox', 'bus_pci', 'compressdev']
+
+sources += files(
+ 'nitrox_comp.c',
+)
+
+includes += include_directories('../../common/nitrox')
diff --git a/drivers/compress/nitrox/nitrox_comp.c b/drivers/compress/nitrox/nitrox_comp.c
new file mode 100644
index 0000000000..e97a686fbf
--- /dev/null
+++ b/drivers/compress/nitrox/nitrox_comp.c
@@ -0,0 +1,353 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2024 Marvell.
+ */
+
+#include <rte_compressdev_pmd.h>
+#include <rte_comp.h>
+#include <rte_errno.h>
+
+#include "nitrox_comp.h"
+#include "nitrox_device.h"
+#include "nitrox_logs.h"
+#include "nitrox_comp_reqmgr.h"
+
+static const char nitrox_comp_drv_name[] = RTE_STR(COMPRESSDEV_NAME_NITROX_PMD);
+static const struct rte_driver nitrox_rte_comp_drv = {
+ .name = nitrox_comp_drv_name,
+ .alias = nitrox_comp_drv_name
+};
+
+static const struct rte_compressdev_capabilities
+ nitrox_comp_pmd_capabilities[] = {
+ { .algo = RTE_COMP_ALGO_DEFLATE,
+ .comp_feature_flags = RTE_COMP_FF_HUFFMAN_FIXED |
+ RTE_COMP_FF_HUFFMAN_DYNAMIC |
+ RTE_COMP_FF_CRC32_CHECKSUM |
+ RTE_COMP_FF_ADLER32_CHECKSUM |
+ RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
+ RTE_COMP_FF_OOP_SGL_IN_SGL_OUT |
+ RTE_COMP_FF_OOP_SGL_IN_LB_OUT |
+ RTE_COMP_FF_OOP_LB_IN_SGL_OUT,
+ .window_size = {
+ .min = NITROX_COMP_WINDOW_SIZE_MIN,
+ .max = NITROX_COMP_WINDOW_SIZE_MAX,
+ .increment = 1
+ },
+ },
+ RTE_COMP_END_OF_CAPABILITIES_LIST()
+};
+
+static int nitrox_comp_dev_configure(struct rte_compressdev *dev,
+ struct rte_compressdev_config *config)
+{
+ struct nitrox_comp_device *comp_dev = dev->data->dev_private;
+ struct nitrox_device *ndev = comp_dev->ndev;
+ uint32_t xform_cnt;
+ char name[RTE_MEMPOOL_NAMESIZE];
+
+ if (config->nb_queue_pairs > ndev->nr_queues) {
+ NITROX_LOG(ERR, "Invalid queue pairs, max supported %d\n",
+ ndev->nr_queues);
+ return -EINVAL;
+ }
+
+ xform_cnt = config->max_nb_priv_xforms + config->max_nb_streams;
+ if (unlikely(xform_cnt == 0)) {
+ NITROX_LOG(ERR, "Invalid configuration with 0 xforms\n");
+ return -EINVAL;
+ }
+
+ snprintf(name, sizeof(name), "%s_xform", dev->data->name);
+ comp_dev->xform_pool = rte_mempool_create(name,
+ xform_cnt, sizeof(struct nitrox_comp_xform),
+ 0, 0, NULL, NULL, NULL, NULL,
+ config->socket_id, 0);
+ if (comp_dev->xform_pool == NULL) {
+ NITROX_LOG(ERR, "Failed to create xform pool, err %d\n",
+ rte_errno);
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int nitrox_comp_dev_start(struct rte_compressdev *dev)
+{
+ RTE_SET_USED(dev);
+ return 0;
+}
+
+static void nitrox_comp_dev_stop(struct rte_compressdev *dev)
+{
+ RTE_SET_USED(dev);
+}
+
+static int nitrox_comp_dev_close(struct rte_compressdev *dev)
+{
+ struct nitrox_comp_device *comp_dev = dev->data->dev_private;
+
+ rte_mempool_free(comp_dev->xform_pool);
+ comp_dev->xform_pool = NULL;
+ return 0;
+}
+
+static void nitrox_comp_stats_get(struct rte_compressdev *dev,
+ struct rte_compressdev_stats *stats)
+{
+ RTE_SET_USED(dev);
+ RTE_SET_USED(stats);
+}
+
+static void nitrox_comp_stats_reset(struct rte_compressdev *dev)
+{
+ RTE_SET_USED(dev);
+}
+
+static void nitrox_comp_dev_info_get(struct rte_compressdev *dev,
+ struct rte_compressdev_info *info)
+{
+ struct nitrox_comp_device *comp_dev = dev->data->dev_private;
+ struct nitrox_device *ndev = comp_dev->ndev;
+
+ if (!info)
+ return;
+
+ info->max_nb_queue_pairs = ndev->nr_queues;
+ info->feature_flags = dev->feature_flags;
+ info->capabilities = nitrox_comp_pmd_capabilities;
+}
+
+static int nitrox_comp_queue_pair_setup(struct rte_compressdev *dev,
+ uint16_t qp_id,
+ uint32_t max_inflight_ops, int socket_id)
+{
+ RTE_SET_USED(dev);
+ RTE_SET_USED(qp_id);
+ RTE_SET_USED(max_inflight_ops);
+ RTE_SET_USED(socket_id);
+ return -1;
+}
+
+static int nitrox_comp_queue_pair_release(struct rte_compressdev *dev,
+ uint16_t qp_id)
+{
+ RTE_SET_USED(dev);
+ RTE_SET_USED(qp_id);
+ return 0;
+}
+
+static int nitrox_comp_private_xform_create(struct rte_compressdev *dev,
+ const struct rte_comp_xform *xform,
+ void **private_xform)
+{
+ struct nitrox_comp_device *comp_dev = dev->data->dev_private;
+ struct nitrox_comp_xform *nxform;
+ enum rte_comp_checksum_type chksum_type;
+ int ret;
+
+ if (unlikely(comp_dev->xform_pool == NULL)) {
+ NITROX_LOG(ERR, "private xform pool not yet created\n");
+ return -EINVAL;
+ }
+
+ if (rte_mempool_get(comp_dev->xform_pool, private_xform)) {
+ NITROX_LOG(ERR, "Failed to get from private xform pool\n");
+ return -ENOMEM;
+ }
+
+ nxform = (struct nitrox_comp_xform *)*private_xform;
+ memset(nxform, 0, sizeof(*nxform));
+ if (xform->type == RTE_COMP_COMPRESS) {
+ enum rte_comp_huffman algo;
+ int level;
+
+ nxform->op = NITROX_COMP_OP_COMPRESS;
+ if (xform->compress.algo != RTE_COMP_ALGO_DEFLATE) {
+ NITROX_LOG(ERR, "Only deflate is supported\n");
+ ret = -ENOTSUP;
+ goto err_exit;
+ }
+
+ algo = xform->compress.deflate.huffman;
+ if (algo == RTE_COMP_HUFFMAN_DEFAULT)
+ nxform->algo = NITROX_COMP_ALGO_DEFLATE_DEFAULT;
+ else if (algo == RTE_COMP_HUFFMAN_FIXED)
+ nxform->algo = NITROX_COMP_ALGO_DEFLATE_FIXEDHUFF;
+ else if (algo == RTE_COMP_HUFFMAN_DYNAMIC)
+ nxform->algo = NITROX_COMP_ALGO_DEFLATE_DYNHUFF;
+ else {
+ NITROX_LOG(ERR, "Invalid deflate algorithm %d\n", algo);
+ ret = -EINVAL;
+ goto err_exit;
+ }
+
+ level = xform->compress.level;
+ if (level == RTE_COMP_LEVEL_PMD_DEFAULT) {
+ nxform->level = NITROX_COMP_LEVEL_MEDIUM;
+ } else if (level >= NITROX_COMP_LEVEL_LOWEST_START &&
+ level <= NITROX_COMP_LEVEL_LOWEST_END) {
+ nxform->level = NITROX_COMP_LEVEL_LOWEST;
+ } else if (level >= NITROX_COMP_LEVEL_LOWER_START &&
+ level <= NITROX_COMP_LEVEL_LOWER_END) {
+ nxform->level = NITROX_COMP_LEVEL_LOWER;
+ } else if (level >= NITROX_COMP_LEVEL_MEDIUM_START &&
+ level <= NITROX_COMP_LEVEL_MEDIUM_END) {
+ nxform->level = NITROX_COMP_LEVEL_MEDIUM;
+ } else if (level >= NITROX_COMP_LEVEL_BEST_START &&
+ level <= NITROX_COMP_LEVEL_BEST_END) {
+ nxform->level = NITROX_COMP_LEVEL_BEST;
+ } else {
+ NITROX_LOG(ERR, "Unsupported compression level %d\n",
+ xform->compress.level);
+ ret = -ENOTSUP;
+ goto err_exit;
+ }
+
+ chksum_type = xform->compress.chksum;
+ } else if (xform->type == RTE_COMP_DECOMPRESS) {
+ nxform->op = NITROX_COMP_OP_DECOMPRESS;
+ if (xform->decompress.algo != RTE_COMP_ALGO_DEFLATE) {
+ NITROX_LOG(ERR, "Only deflate is supported\n");
+ ret = -ENOTSUP;
+ goto err_exit;
+ }
+
+ nxform->algo = NITROX_COMP_ALGO_DEFLATE_DEFAULT;
+ nxform->level = NITROX_COMP_LEVEL_BEST;
+ chksum_type = xform->decompress.chksum;
+ } else {
+ ret = -EINVAL;
+ goto err_exit;
+ }
+
+ if (chksum_type == RTE_COMP_CHECKSUM_NONE)
+ nxform->chksum_type = NITROX_CHKSUM_TYPE_NONE;
+ else if (chksum_type == RTE_COMP_CHECKSUM_CRC32)
+ nxform->chksum_type = NITROX_CHKSUM_TYPE_CRC32;
+ else if (chksum_type == RTE_COMP_CHECKSUM_ADLER32)
+ nxform->chksum_type = NITROX_CHKSUM_TYPE_ADLER32;
+ else {
+ NITROX_LOG(ERR, "Unsupported checksum type %d\n",
+ chksum_type);
+ ret = -ENOTSUP;
+ goto err_exit;
+ }
+
+ return 0;
+err_exit:
+ memset(nxform, 0, sizeof(*nxform));
+ rte_mempool_put(comp_dev->xform_pool, nxform);
+ return ret;
+}
+
+static int nitrox_comp_private_xform_free(struct rte_compressdev *dev,
+ void *private_xform)
+{
+ struct nitrox_comp_xform *nxform = private_xform;
+ struct rte_mempool *mp = rte_mempool_from_obj(nxform);
+
+ RTE_SET_USED(dev);
+ if (unlikely(nxform == NULL))
+ return -EINVAL;
+
+ memset(nxform, 0, sizeof(*nxform));
+ mp = rte_mempool_from_obj(nxform);
+ rte_mempool_put(mp, nxform);
+ return 0;
+}
+
+static uint16_t nitrox_comp_dev_enq_burst(void *qp,
+ struct rte_comp_op **ops,
+ uint16_t nb_ops)
+{
+ RTE_SET_USED(qp);
+ RTE_SET_USED(ops);
+ RTE_SET_USED(nb_ops);
+ return 0;
+}
+
+static uint16_t nitrox_comp_dev_deq_burst(void *qp,
+ struct rte_comp_op **ops,
+ uint16_t nb_ops)
+{
+ RTE_SET_USED(qp);
+ RTE_SET_USED(ops);
+ RTE_SET_USED(nb_ops);
+ return 0;
+}
+
+static struct rte_compressdev_ops nitrox_compressdev_ops = {
+ .dev_configure = nitrox_comp_dev_configure,
+ .dev_start = nitrox_comp_dev_start,
+ .dev_stop = nitrox_comp_dev_stop,
+ .dev_close = nitrox_comp_dev_close,
+
+ .stats_get = nitrox_comp_stats_get,
+ .stats_reset = nitrox_comp_stats_reset,
+
+ .dev_infos_get = nitrox_comp_dev_info_get,
+
+ .queue_pair_setup = nitrox_comp_queue_pair_setup,
+ .queue_pair_release = nitrox_comp_queue_pair_release,
+
+ .private_xform_create = nitrox_comp_private_xform_create,
+ .private_xform_free = nitrox_comp_private_xform_free,
+ .stream_create = NULL,
+ .stream_free = NULL
+};
+
+int
+nitrox_comp_pmd_create(struct nitrox_device *ndev)
+{
+ char name[RTE_COMPRESSDEV_NAME_MAX_LEN];
+ struct rte_compressdev_pmd_init_params init_params = {
+ .name = "",
+ .socket_id = ndev->pdev->device.numa_node,
+ };
+ struct rte_compressdev *cdev;
+
+ rte_pci_device_name(&ndev->pdev->addr, name, sizeof(name));
+ snprintf(name + strlen(name),
+ RTE_COMPRESSDEV_NAME_MAX_LEN - strlen(name),
+ "_n5comp");
+ ndev->rte_comp_dev.driver = &nitrox_rte_comp_drv;
+ ndev->rte_comp_dev.numa_node = ndev->pdev->device.numa_node;
+ ndev->rte_comp_dev.devargs = NULL;
+ cdev = rte_compressdev_pmd_create(name,
+ &ndev->rte_comp_dev,
+ sizeof(struct nitrox_comp_device),
+ &init_params);
+ if (!cdev) {
+ NITROX_LOG(ERR, "Cryptodev '%s' creation failed\n", name);
+ return -ENODEV;
+ }
+
+ cdev->dev_ops = &nitrox_compressdev_ops;
+ cdev->enqueue_burst = nitrox_comp_dev_enq_burst;
+ cdev->dequeue_burst = nitrox_comp_dev_deq_burst;
+ cdev->feature_flags = RTE_COMPDEV_FF_HW_ACCELERATED;
+
+ ndev->comp_dev = cdev->data->dev_private;
+ ndev->comp_dev->cdev = cdev;
+ ndev->comp_dev->ndev = ndev;
+ ndev->comp_dev->xform_pool = NULL;
+ NITROX_LOG(DEBUG, "Created compressdev '%s', dev_id %d\n",
+ cdev->data->name, cdev->data->dev_id);
+ return 0;
+}
+
+int
+nitrox_comp_pmd_destroy(struct nitrox_device *ndev)
+{
+ int err;
+
+ if (ndev->comp_dev == NULL)
+ return 0;
+
+ err = rte_compressdev_pmd_destroy(ndev->comp_dev->cdev);
+ if (err)
+ return err;
+
+ ndev->comp_dev = NULL;
+ return 0;
+}
diff --git a/drivers/compress/nitrox/nitrox_comp.h b/drivers/compress/nitrox/nitrox_comp.h
new file mode 100644
index 0000000000..90e1931b05
--- /dev/null
+++ b/drivers/compress/nitrox/nitrox_comp.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2024 Marvell.
+ */
+
+#ifndef _NITROX_COMP_H_
+#define _NITROX_COMP_H_
+
+#define COMPRESSDEV_NAME_NITROX_PMD compress_nitrox
+#define NITROX_DECOMP_CTX_SIZE 2048
+#define NITROX_CONSTANTS_MAX_SEARCH_DEPTH 31744
+#define NITROX_COMP_WINDOW_SIZE_MIN 1
+#define NITROX_COMP_WINDOW_SIZE_MAX 15
+#define NITROX_COMP_LEVEL_LOWEST_START 1
+#define NITROX_COMP_LEVEL_LOWEST_END 2
+#define NITROX_COMP_LEVEL_LOWER_START 3
+#define NITROX_COMP_LEVEL_LOWER_END 4
+#define NITROX_COMP_LEVEL_MEDIUM_START 5
+#define NITROX_COMP_LEVEL_MEDIUM_END 6
+#define NITROX_COMP_LEVEL_BEST_START 7
+#define NITROX_COMP_LEVEL_BEST_END 9
+
+struct nitrox_comp_device {
+ struct rte_compressdev *cdev;
+ struct nitrox_device *ndev;
+ struct rte_mempool *xform_pool;
+};
+
+struct nitrox_device;
+
+int nitrox_comp_pmd_create(struct nitrox_device *ndev);
+int nitrox_comp_pmd_destroy(struct nitrox_device *ndev);
+
+#endif /* _NITROX_COMP_H_ */
diff --git a/drivers/compress/nitrox/nitrox_comp_reqmgr.h b/drivers/compress/nitrox/nitrox_comp_reqmgr.h
new file mode 100644
index 0000000000..14f35a1e5b
--- /dev/null
+++ b/drivers/compress/nitrox/nitrox_comp_reqmgr.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2024 Marvell.
+ */
+
+#ifndef _NITROX_COMP_REQMGR_H_
+#define _NITROX_COMP_REQMGR_H_
+
+enum nitrox_comp_op {
+ NITROX_COMP_OP_DECOMPRESS,
+ NITROX_COMP_OP_COMPRESS,
+};
+
+enum nitrox_comp_algo {
+ NITROX_COMP_ALGO_DEFLATE_DEFAULT,
+ NITROX_COMP_ALGO_DEFLATE_DYNHUFF,
+ NITROX_COMP_ALGO_DEFLATE_FIXEDHUFF,
+ NITROX_COMP_ALGO_LZS,
+};
+
+enum nitrox_comp_level {
+ NITROX_COMP_LEVEL_BEST,
+ NITROX_COMP_LEVEL_MEDIUM,
+ NITROX_COMP_LEVEL_LOWER,
+ NITROX_COMP_LEVEL_LOWEST,
+};
+
+enum nitrox_chksum_type {
+ NITROX_CHKSUM_TYPE_CRC32,
+ NITROX_CHKSUM_TYPE_ADLER32,
+ NITROX_CHKSUM_TYPE_NONE,
+};
+
+struct nitrox_comp_xform {
+ enum nitrox_comp_op op;
+ enum nitrox_comp_algo algo;
+ enum nitrox_comp_level level;
+ enum nitrox_chksum_type chksum_type;
+};
+
+#endif /* _NITROX_COMP_REQMGR_H_ */
--
2.42.0
next prev parent reply other threads:[~2024-03-02 9:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-02 9:38 [PATCH 0/7] add Nitrox compress device support Nagadheeraj Rottela
2024-03-02 9:38 ` [PATCH v5 1/7] crypto/nitrox: move common code Nagadheeraj Rottela
2024-03-02 9:38 ` Nagadheeraj Rottela [this message]
2024-03-02 9:38 ` [PATCH v5 3/7] common/nitrox: add compress hardware queue management Nagadheeraj Rottela
2024-03-02 9:38 ` [PATCH v5 4/7] crypto/nitrox: set queue type during queue pair setup Nagadheeraj Rottela
2024-03-02 9:38 ` [PATCH v5 5/7] compress/nitrox: add software queue management Nagadheeraj Rottela
2024-03-02 9:38 ` [PATCH v5 6/7] compress/nitrox: support stateless request Nagadheeraj Rottela
2024-03-02 9:38 ` [PATCH v5 7/7] compress/nitrox: support stateful request Nagadheeraj Rottela
2024-03-04 7:14 ` [PATCH 0/7] add Nitrox compress device support Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240302093813.14922-3-rnagadheeraj@marvell.com \
--to=rnagadheeraj@marvell.com \
--cc=ashishg@marvell.com \
--cc=dev@dpdk.org \
--cc=fanzhang.oss@gmail.com \
--cc=gakhil@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).