From: Mingjin Ye <mingjinx.ye@intel.com>
To: dev@dpdk.org
Cc: Mingjin Ye <mingjinx.ye@intel.com>,
Yuying Zhang <Yuying.Zhang@intel.com>
Subject: [PATCH v6] net/i40e: add diagnostic support in Tx path
Date: Mon, 4 Mar 2024 09:33:21 +0000 [thread overview]
Message-ID: <20240304093321.592061-1-mingjinx.ye@intel.com> (raw)
In-Reply-To: <20240301094422.460012-1-mingjinx.ye@intel.com>
Implemented a Tx wrapper to perform a thorough check on mbufs,
categorizing and counting invalid cases by type for diagnostic
purposes. The count of invalid cases is accessible through xstats_get.
Also, the devarg option "mbuf_check" was introduced to configure the
diagnostic parameters to enable the appropriate diagnostic features.
supported cases: mbuf, size, segment, offload.
1. mbuf: Check for corrupted mbuf.
2. size: Check min/max packet length according to HW spec.
3. segment: Check number of mbuf segments not exceed HW limits.
4. offload: Check for use of an unsupported offload flag.
parameter format: "mbuf_check=<case>" or "mbuf_check=[<case1>,<case2>]"
eg: dpdk-testpmd -a 0000:87:00.0,mbuf_check=[mbuf,size] -- -i
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
v2: remove strict.
---
v3: optimised.
---
v4: rebase.
---
v5: fix ci error.
---
v6: Changes the commit log.
---
doc/guides/nics/i40e.rst | 14 +++
drivers/net/i40e/i40e_ethdev.c | 138 ++++++++++++++++++++++++++++-
drivers/net/i40e/i40e_ethdev.h | 28 ++++++
drivers/net/i40e/i40e_rxtx.c | 153 +++++++++++++++++++++++++++++++--
drivers/net/i40e/i40e_rxtx.h | 2 +
5 files changed, 327 insertions(+), 8 deletions(-)
diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 15689ac958..91b45e1d40 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -275,6 +275,20 @@ Runtime Configuration
-a 84:00.0,vf_msg_cfg=80@120:180
+- ``Support TX diagnostics`` (default ``not enabled``)
+
+ Set the ``devargs`` parameter ``mbuf_check`` to enable TX diagnostics.
+ For example, ``-a 87:00.0,mbuf_check=<case>`` or ``-a 87:00.0,mbuf_check=[<case1>,<case2>...]``.
+ Thereafter, ``rte_eth_xstats_get()`` can be used to get the error counts,
+ which are collected in ``tx_mbuf_error_packets`` xstats.
+ In testpmd these can be shown via: ``testpmd> show port xstats all``.
+ Supported values for the ``case`` parameter are:
+
+ * mbuf: Check for corrupted mbuf.
+ * size: Check min/max packet length according to HW spec.
+ * segment: Check number of mbuf segments does not exceed HW limits.
+ * offload: Check for use of an unsupported offload flag.
+
Vector RX Pre-conditions
~~~~~~~~~~~~~~~~~~~~~~~~
For Vector RX it is assumed that the number of descriptor rings will be a power
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 4d21341382..3e2ddcaa3e 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -48,6 +48,7 @@
#define ETH_I40E_SUPPORT_MULTI_DRIVER "support-multi-driver"
#define ETH_I40E_QUEUE_NUM_PER_VF_ARG "queue-num-per-vf"
#define ETH_I40E_VF_MSG_CFG "vf_msg_cfg"
+#define ETH_I40E_MBUF_CHECK_ARG "mbuf_check"
#define I40E_CLEAR_PXE_WAIT_MS 200
#define I40E_VSI_TSR_QINQ_STRIP 0x4010
@@ -412,6 +413,7 @@ static const char *const valid_keys[] = {
ETH_I40E_SUPPORT_MULTI_DRIVER,
ETH_I40E_QUEUE_NUM_PER_VF_ARG,
ETH_I40E_VF_MSG_CFG,
+ ETH_I40E_MBUF_CHECK_ARG,
NULL};
static const struct rte_pci_id pci_id_i40e_map[] = {
@@ -545,6 +547,14 @@ static const struct rte_i40e_xstats_name_off rte_i40e_stats_strings[] = {
#define I40E_NB_ETH_XSTATS (sizeof(rte_i40e_stats_strings) / \
sizeof(rte_i40e_stats_strings[0]))
+static const struct rte_i40e_xstats_name_off i40e_mbuf_strings[] = {
+ {"tx_mbuf_error_packets", offsetof(struct i40e_mbuf_stats,
+ tx_pkt_errors)},
+};
+
+#define I40E_NB_MBUF_XSTATS (sizeof(i40e_mbuf_strings) / \
+ sizeof(i40e_mbuf_strings[0]))
+
static const struct rte_i40e_xstats_name_off rte_i40e_hw_port_strings[] = {
{"tx_link_down_dropped", offsetof(struct i40e_hw_port_stats,
tx_dropped_link_down)},
@@ -1373,6 +1383,88 @@ read_vf_msg_config(__rte_unused const char *key,
return 0;
}
+static int
+read_mbuf_check_config(__rte_unused const char *key, const char *value, void *args)
+{
+ char *cur;
+ char *tmp;
+ int str_len;
+ int valid_len;
+
+ int ret = 0;
+ uint64_t *mc_flags = args;
+ char *str2 = strdup(value);
+ if (str2 == NULL)
+ return -1;
+
+ str_len = strlen(str2);
+ if (str2[0] == '[' && str2[str_len - 1] == ']') {
+ if (str_len < 3) {
+ ret = -1;
+ goto mdd_end;
+ }
+ valid_len = str_len - 2;
+ memmove(str2, str2 + 1, valid_len);
+ memset(str2 + valid_len, '\0', 2);
+ }
+ cur = strtok_r(str2, ",", &tmp);
+ while (cur != NULL) {
+ if (!strcmp(cur, "mbuf"))
+ *mc_flags |= I40E_MBUF_CHECK_F_TX_MBUF;
+ else if (!strcmp(cur, "size"))
+ *mc_flags |= I40E_MBUF_CHECK_F_TX_SIZE;
+ else if (!strcmp(cur, "segment"))
+ *mc_flags |= I40E_MBUF_CHECK_F_TX_SEGMENT;
+ else if (!strcmp(cur, "offload"))
+ *mc_flags |= I40E_MBUF_CHECK_F_TX_OFFLOAD;
+ else
+ PMD_DRV_LOG(ERR, "Unsupported mdd check type: %s", cur);
+ cur = strtok_r(NULL, ",", &tmp);
+ }
+
+mdd_end:
+ free(str2);
+ return ret;
+}
+
+static int
+i40e_parse_mbuf_check(struct rte_eth_dev *dev)
+{
+ struct i40e_adapter *ad =
+ I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+ struct rte_kvargs *kvlist;
+ int kvargs_count;
+ int ret = 0;
+
+ if (!dev->device->devargs)
+ return ret;
+
+ kvlist = rte_kvargs_parse(dev->device->devargs->args, valid_keys);
+ if (!kvlist)
+ return -EINVAL;
+
+ kvargs_count = rte_kvargs_count(kvlist, ETH_I40E_MBUF_CHECK_ARG);
+ if (!kvargs_count)
+ goto free_end;
+
+ if (kvargs_count > 1)
+ PMD_DRV_LOG(WARNING, "More than one argument \"%s\" and only "
+ "the first invalid or last valid one is used !",
+ ETH_I40E_MBUF_CHECK_ARG);
+
+ ret = rte_kvargs_process(kvlist, ETH_I40E_MBUF_CHECK_ARG,
+ read_mbuf_check_config, &ad->mc_flags);
+ if (ret)
+ goto free_end;
+
+ if (ad->mc_flags)
+ ad->devargs.mbuf_check = 1;
+
+free_end:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
static int
i40e_parse_vf_msg_config(struct rte_eth_dev *dev,
struct i40e_vf_msg_cfg *msg_cfg)
@@ -1488,6 +1580,7 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
}
i40e_parse_vf_msg_config(dev, &pf->vf_msg_cfg);
+ i40e_parse_mbuf_check(dev);
/* Check if need to support multi-driver */
i40e_support_multi_driver(dev);
@@ -2324,6 +2417,8 @@ i40e_dev_start(struct rte_eth_dev *dev)
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vsi *main_vsi = pf->main_vsi;
+ struct i40e_adapter *ad =
+ I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
int ret, i;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
@@ -2483,6 +2578,7 @@ i40e_dev_start(struct rte_eth_dev *dev)
max_frame_size = dev->data->mtu ?
dev->data->mtu + I40E_ETH_OVERHEAD :
I40E_FRAME_SIZE_MAX;
+ ad->max_pkt_len = max_frame_size;
/* Set the max frame size to HW*/
i40e_aq_set_mac_config(hw, max_frame_size, TRUE, false, 0, NULL);
@@ -3502,13 +3598,17 @@ i40e_dev_stats_reset(struct rte_eth_dev *dev)
/* read the stats, reading current register values into offset */
i40e_read_stats_registers(pf, hw);
+ memset(&pf->mbuf_stats, 0,
+ sizeof(struct i40e_mbuf_stats));
+
return 0;
}
static uint32_t
i40e_xstats_calc_num(void)
{
- return I40E_NB_ETH_XSTATS + I40E_NB_HW_PORT_XSTATS +
+ return I40E_NB_ETH_XSTATS + I40E_NB_MBUF_XSTATS +
+ I40E_NB_HW_PORT_XSTATS +
(I40E_NB_RXQ_PRIO_XSTATS * 8) +
(I40E_NB_TXQ_PRIO_XSTATS * 8);
}
@@ -3533,6 +3633,14 @@ static int i40e_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
count++;
}
+ /* Get stats from i40e_mbuf_stats struct */
+ for (i = 0; i < I40E_NB_MBUF_XSTATS; i++) {
+ strlcpy(xstats_names[count].name,
+ i40e_mbuf_strings[i].name,
+ sizeof(xstats_names[count].name));
+ count++;
+ }
+
/* Get individual stats from i40e_hw_port struct */
for (i = 0; i < I40E_NB_HW_PORT_XSTATS; i++) {
strlcpy(xstats_names[count].name,
@@ -3563,12 +3671,28 @@ static int i40e_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
return count;
}
+static void
+i40e_dev_update_mbuf_stats(struct rte_eth_dev *ethdev,
+ struct i40e_mbuf_stats *mbuf_stats)
+{
+ uint16_t idx;
+ struct i40e_tx_queue *txq;
+
+ for (idx = 0; idx < ethdev->data->nb_tx_queues; idx++) {
+ txq = ethdev->data->tx_queues[idx];
+ mbuf_stats->tx_pkt_errors += txq->mbuf_errors;
+ }
+}
+
static int
i40e_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
unsigned n)
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_adapter *adapter =
+ I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+ struct i40e_mbuf_stats mbuf_stats = {0};
unsigned i, count, prio;
struct i40e_hw_port_stats *hw_stats = &pf->stats;
@@ -3583,6 +3707,9 @@ i40e_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
count = 0;
+ if (adapter->devargs.mbuf_check)
+ i40e_dev_update_mbuf_stats(dev, &mbuf_stats);
+
/* Get stats from i40e_eth_stats struct */
for (i = 0; i < I40E_NB_ETH_XSTATS; i++) {
xstats[count].value = *(uint64_t *)(((char *)&hw_stats->eth) +
@@ -3591,6 +3718,15 @@ i40e_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
count++;
}
+ /* Get stats from i40e_mbuf_stats struct */
+ for (i = 0; i < I40E_NB_MBUF_XSTATS; i++) {
+ xstats[count].value =
+ *(uint64_t *)((char *)&mbuf_stats +
+ i40e_mbuf_strings[i].offset);
+ xstats[count].id = count;
+ count++;
+ }
+
/* Get individual stats from i40e_hw_port struct */
for (i = 0; i < I40E_NB_HW_PORT_XSTATS; i++) {
xstats[count].value = *(uint64_t *)(((char *)hw_stats) +
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 445e1c0b38..ae3f2f60ac 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -1109,6 +1109,10 @@ struct i40e_vf_msg_cfg {
uint32_t ignore_second;
};
+struct i40e_mbuf_stats {
+ uint64_t tx_pkt_errors;
+};
+
/*
* Structure to store private data specific for PF instance.
*/
@@ -1123,6 +1127,7 @@ struct i40e_pf {
struct i40e_hw_port_stats stats_offset;
struct i40e_hw_port_stats stats;
+ struct i40e_mbuf_stats mbuf_stats;
u64 rx_err1; /* rxerr1 */
u64 rx_err1_offset;
@@ -1225,6 +1230,25 @@ struct i40e_vsi_vlan_pvid_info {
#define I40E_MAX_PKT_TYPE 256
#define I40E_FLOW_TYPE_MAX 64
+#define I40E_MBUF_CHECK_F_TX_MBUF (1ULL << 0)
+#define I40E_MBUF_CHECK_F_TX_SIZE (1ULL << 1)
+#define I40E_MBUF_CHECK_F_TX_SEGMENT (1ULL << 2)
+#define I40E_MBUF_CHECK_F_TX_OFFLOAD (1ULL << 3)
+
+enum i40e_tx_burst_type {
+ I40E_TX_DEFAULT,
+ I40E_TX_SIMPLE,
+ I40E_TX_SSE,
+ I40E_TX_AVX2,
+ I40E_TX_AVX512,
+};
+
+/**
+ * Cache devargs parse result.
+ */
+struct i40e_devargs {
+ int mbuf_check;
+};
/*
* Structure to store private data for each PF/VF instance.
*/
@@ -1241,6 +1265,10 @@ struct i40e_adapter {
bool tx_simple_allowed;
bool tx_vec_allowed;
+ struct i40e_devargs devargs;
+ uint64_t mc_flags; /* mbuf check flags. */
+ uint16_t max_pkt_len; /* Maximum packet length */
+ enum i40e_tx_burst_type tx_burst_type;
/* For PTP */
struct rte_timecounter systime_tc;
struct rte_timecounter rx_tstamp_tc;
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index a0bc30d45b..c7c9c945e4 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -1536,6 +1536,138 @@ i40e_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
return nb_tx;
}
+static
+const eth_tx_burst_t i40e_tx_pkt_burst_ops[] = {
+ [I40E_TX_DEFAULT] = i40e_xmit_pkts,
+ [I40E_TX_SIMPLE] = i40e_xmit_pkts_simple,
+ [I40E_TX_SSE] = i40e_xmit_pkts_vec,
+#ifdef RTE_ARCH_X86
+ [I40E_TX_AVX2] = i40e_xmit_pkts_vec_avx2,
+#ifdef CC_AVX512_SUPPORT
+ [I40E_TX_AVX512] = i40e_xmit_pkts_vec_avx512,
+#endif
+#endif
+};
+
+/* Tx mbuf check */
+static uint16_t
+i40e_xmit_pkts_check(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct i40e_tx_queue *txq = tx_queue;
+ uint16_t idx;
+ uint64_t ol_flags;
+ struct rte_mbuf *mb;
+ bool pkt_error = false;
+ const char *reason = NULL;
+ uint16_t good_pkts = nb_pkts;
+ struct i40e_adapter *adapter = txq->vsi->adapter;
+ enum i40e_tx_burst_type tx_burst_type =
+ txq->vsi->adapter->tx_burst_type;
+
+
+ for (idx = 0; idx < nb_pkts; idx++) {
+ mb = tx_pkts[idx];
+ ol_flags = mb->ol_flags;
+
+ if ((adapter->mc_flags & I40E_MBUF_CHECK_F_TX_MBUF) &&
+ (rte_mbuf_check(mb, 0, &reason) != 0)) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: %s\n", reason);
+ pkt_error = true;
+ break;
+ }
+
+ if ((adapter->mc_flags & I40E_MBUF_CHECK_F_TX_SIZE) &&
+ (mb->data_len > mb->pkt_len ||
+ mb->data_len < I40E_TX_MIN_PKT_LEN ||
+ mb->data_len > adapter->max_pkt_len)) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: data_len (%u) is out "
+ "of range, reasonable range (%d - %u)\n", mb->data_len,
+ I40E_TX_MIN_PKT_LEN, adapter->max_pkt_len);
+ pkt_error = true;
+ break;
+ }
+
+ if (adapter->mc_flags & I40E_MBUF_CHECK_F_TX_SEGMENT) {
+ if (!(ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
+ /**
+ * No TSO case: nb->segs, pkt_len to not exceed
+ * the limites.
+ */
+ if (mb->nb_segs > I40E_TX_MAX_MTU_SEG) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: nb_segs (%d) exceeds "
+ "HW limit, maximum allowed value is %d\n", mb->nb_segs,
+ I40E_TX_MAX_MTU_SEG);
+ pkt_error = true;
+ break;
+ }
+ if (mb->pkt_len > I40E_FRAME_SIZE_MAX) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: pkt_len (%d) exceeds "
+ "HW limit, maximum allowed value is %d\n", mb->nb_segs,
+ I40E_FRAME_SIZE_MAX);
+ pkt_error = true;
+ break;
+ }
+ } else if (ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
+ /** TSO case: tso_segsz, nb_segs, pkt_len not exceed
+ * the limits.
+ */
+ if (mb->tso_segsz < I40E_MIN_TSO_MSS ||
+ mb->tso_segsz > I40E_MAX_TSO_MSS) {
+ /**
+ * MSS outside the range are considered malicious
+ */
+ PMD_TX_LOG(ERR, "INVALID mbuf: tso_segsz (%u) is out "
+ "of range, reasonable range (%d - %u)\n", mb->tso_segsz,
+ I40E_MIN_TSO_MSS, I40E_MAX_TSO_MSS);
+ pkt_error = true;
+ break;
+ }
+ if (mb->nb_segs >
+ ((struct i40e_tx_queue *)tx_queue)->nb_tx_desc) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: nb_segs out "
+ "of ring length\n");
+ pkt_error = true;
+ break;
+ }
+ if (mb->pkt_len > I40E_TSO_FRAME_SIZE_MAX) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: pkt_len (%d) exceeds "
+ "HW limit, maximum allowed value is %d\n", mb->nb_segs,
+ I40E_TSO_FRAME_SIZE_MAX);
+ pkt_error = true;
+ break;
+ }
+ }
+ }
+
+ if (adapter->mc_flags & I40E_MBUF_CHECK_F_TX_OFFLOAD) {
+ if (ol_flags & I40E_TX_OFFLOAD_NOTSUP_MASK) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: TX offload "
+ "is not supported\n");
+ pkt_error = true;
+ break;
+ }
+
+ if (!rte_validate_tx_offload(mb)) {
+ PMD_TX_LOG(ERR, "INVALID mbuf: TX offload "
+ "setup error\n");
+ pkt_error = true;
+ break;
+ }
+ }
+ }
+
+ if (pkt_error) {
+ txq->mbuf_errors++;
+ good_pkts = idx;
+ if (good_pkts == 0)
+ return 0;
+ }
+
+ return i40e_tx_pkt_burst_ops[tx_burst_type](tx_queue,
+ tx_pkts, good_pkts);
+}
+
/*********************************************************************
*
* TX simple prep functions
@@ -3468,6 +3600,8 @@ i40e_set_tx_function(struct rte_eth_dev *dev)
{
struct i40e_adapter *ad =
I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+ enum i40e_tx_burst_type tx_burst_type = I40E_TX_DEFAULT;
+ int mbuf_check = ad->devargs.mbuf_check;
int i;
if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
@@ -3502,34 +3636,39 @@ i40e_set_tx_function(struct rte_eth_dev *dev)
#ifdef CC_AVX512_SUPPORT
PMD_DRV_LOG(NOTICE, "Using AVX512 Vector Tx (port %d).",
dev->data->port_id);
- dev->tx_pkt_burst = i40e_xmit_pkts_vec_avx512;
+ tx_burst_type = I40E_TX_AVX512;
#endif
} else {
PMD_INIT_LOG(DEBUG, "Using %sVector Tx (port %d).",
ad->tx_use_avx2 ? "avx2 " : "",
dev->data->port_id);
- dev->tx_pkt_burst = ad->tx_use_avx2 ?
- i40e_xmit_pkts_vec_avx2 :
- i40e_xmit_pkts_vec;
+ tx_burst_type = ad->tx_use_avx2 ? I40E_TX_AVX2 : I40E_TX_SSE;
dev->recycle_tx_mbufs_reuse = i40e_recycle_tx_mbufs_reuse_vec;
}
#else /* RTE_ARCH_X86 */
PMD_INIT_LOG(DEBUG, "Using Vector Tx (port %d).",
dev->data->port_id);
- dev->tx_pkt_burst = i40e_xmit_pkts_vec;
+ tx_burst_type = I40E_TX_SSE;
dev->recycle_tx_mbufs_reuse = i40e_recycle_tx_mbufs_reuse_vec;
#endif /* RTE_ARCH_X86 */
} else {
PMD_INIT_LOG(DEBUG, "Simple tx finally be used.");
- dev->tx_pkt_burst = i40e_xmit_pkts_simple;
+ tx_burst_type = I40E_TX_SIMPLE;
dev->recycle_tx_mbufs_reuse = i40e_recycle_tx_mbufs_reuse_vec;
}
dev->tx_pkt_prepare = i40e_simple_prep_pkts;
} else {
PMD_INIT_LOG(DEBUG, "Xmit tx finally be used.");
- dev->tx_pkt_burst = i40e_xmit_pkts;
+ tx_burst_type = I40E_TX_DEFAULT;
dev->tx_pkt_prepare = i40e_prep_pkts;
}
+
+ if (mbuf_check) {
+ ad->tx_burst_type = tx_burst_type;
+ dev->tx_pkt_burst = i40e_xmit_pkts_check;
+ } else {
+ dev->tx_pkt_burst = i40e_tx_pkt_burst_ops[tx_burst_type];
+ }
}
static const struct {
diff --git a/drivers/net/i40e/i40e_rxtx.h b/drivers/net/i40e/i40e_rxtx.h
index 31dd947222..70320cf25e 100644
--- a/drivers/net/i40e/i40e_rxtx.h
+++ b/drivers/net/i40e/i40e_rxtx.h
@@ -162,6 +162,8 @@ struct i40e_tx_queue {
uint16_t tx_next_dd;
uint16_t tx_next_rs;
bool q_set; /**< indicate if tx queue has been configured */
+ uint64_t mbuf_errors;
+
bool tx_deferred_start; /**< don't start this queue in dev start */
uint8_t dcb_tc; /**< Traffic class of tx queue */
uint64_t offloads; /**< Tx offload flags of RTE_ETH_TX_OFFLOAD_* */
--
2.25.1
next prev parent reply other threads:[~2024-03-04 9:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-21 10:13 [PATCH] net/i40e: add diagnostic support in TX path Mingjin Ye
2023-12-22 16:17 ` Morten Brørup
2024-01-04 10:20 ` [PATCH v3] " Mingjin Ye
2024-01-05 9:59 ` [PATCH v4] " Mingjin Ye
2024-03-01 9:44 ` [PATCH v5] " Mingjin Ye
2024-03-01 10:24 ` Bruce Richardson
2024-03-01 16:13 ` Patrick Robb
2024-03-04 9:33 ` Mingjin Ye [this message]
2024-03-04 11:47 ` [PATCH v6] net/i40e: add diagnostic support in Tx path Bruce Richardson
2024-03-05 10:17 ` [PATCH v7] " Mingjin Ye
2024-03-05 12:59 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240304093321.592061-1-mingjinx.ye@intel.com \
--to=mingjinx.ye@intel.com \
--cc=Yuying.Zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).