* [PATCH] net/hns3: support more VLAN fields matching
@ 2024-07-04 2:15 Jie Hai
2024-07-07 22:44 ` Ferruh Yigit
0 siblings, 1 reply; 2+ messages in thread
From: Jie Hai @ 2024-07-04 2:15 UTC (permalink / raw)
To: dev, Yisen Zhuang
Cc: lihuisong, fengchengwen, thomas, ferruh.yigit, ivan.malov
The commit 09315fc83861 ("ethdev: add VLAN attributes to ethernet
and VLAN items") introduces ``has_vlan`` and ``has_more_vlan``
fields in items ETH and VLAN. This patch adds support for these
fields. The usage is documented in hns3.rst.
Signed-off-by: Jie Hai <haijie1@huawei.com>
---
doc/guides/nics/hns3.rst | 65 ++++++++++++++++++++++++++++++++++++
drivers/net/hns3/hns3_fdir.h | 4 +++
drivers/net/hns3/hns3_flow.c | 47 +++++++++++++++++++++++---
3 files changed, 112 insertions(+), 4 deletions(-)
diff --git a/doc/guides/nics/hns3.rst b/doc/guides/nics/hns3.rst
index 3e84d1ff1c7f..8c2612bd85ab 100644
--- a/doc/guides/nics/hns3.rst
+++ b/doc/guides/nics/hns3.rst
@@ -234,6 +234,71 @@ src_port=32, dst_port=32`` to queue 1:
dst is 2.2.2.5 / udp src is 32 dst is 32 / end \
actions mark id 1 / queue index 1 / end
+The flow rules:
+
+ rule-0: flow create 0 ingress pattern eth / end \
+ queue index 1 / end
+ rule-1: flow create 0 ingress pattern eth / vlan vid is 10 / end \
+ queue index 1 / end
+ rule-2: flow create 0 ingress pattern eth / vlan / vlan vid is 10 / end \
+ queue index 1 / end
+ rule-3: flow create 0 ingress pattern eth / vlan vid is 10 / \
+ vlan vid is 11 / end queue index 1 / end
+
+will match the following packet types with specific VLAN ID at the specified
+VLAN layer and any VLAN ID at the rest VLAN layer.
+
+ +--------+------------------+-------------------------------------------+
+ | rules | ``strict`` | ``nostrict`` |
+ +========+==================+===========================================+
+ | rule-0 | untagged | untagged || single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-1 | single-tagged | single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-2 | double-tagged | multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-3 | double-tagged | multi-tagged |
+ +--------+------------------+-------------------------------------------+
+
+The attributes `has_vlan` and `has_more_vlan` are supported. The usage is as
+follows:
+
+ rule-4: flow create 0 ingress pattern eth has_vlan is 1 / end \
+ queue index 1 / end
+ rule-5: flow create 0 ingress pattern eth has_vlan is 0 / end \
+ queue index 1 / end
+ rule-6: flow create 0 ingress pattern eth / vlan has_more_vlan is 1 / \
+ end queue index 1 / end
+ rule-7: flow create 0 ingress pattern eth / vlan has_more_vlan is 0 / \
+ end queue index 1 / end
+
+They will match the following packet types with any VLAN ID.
+
+ +--------+------------------+-------------------------------------------+
+ | rules | ``strict`` | ``nostrict`` |
+ +========+==================+===========================================+
+ | rule-4 | single-tagged | untagged || single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-5 | untagged | untagged || single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-6 | double-tagged | untagged || single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+ | rule-7 | single-tagged | untagged || single-tagged || multi-tagged |
+ +--------+------------------+-------------------------------------------+
+
+These two fields may be used followed by VLAN item, and may partially overlap
+or conflict with the VLAN item. For examples, the rule-8 will be rejected by
+the driver and rule-9, rule-10 are repeated with rule-4. Similar usage for
+``has_more_vlan``.
+
+ rule-8: flow create 0 ingress pattern eth has_vlan is 0 / vlan / end \
+ queue index 1 / end
+ rule-9: flow create 0 ingress pattern eth has_vlan is 1 / vlan / end \
+ queue index 1 / end
+ rule-10: flow create 0 ingress pattern eth / vlan / end \
+ queue index 1 / end
+
+
Generic flow API
~~~~~~~~~~~~~~~~
diff --git a/drivers/net/hns3/hns3_fdir.h b/drivers/net/hns3/hns3_fdir.h
index 308cfbe56fc6..6ccd90a253f8 100644
--- a/drivers/net/hns3/hns3_fdir.h
+++ b/drivers/net/hns3/hns3_fdir.h
@@ -160,6 +160,10 @@ struct hns3_fdir_rule {
uint16_t nb_queues;
uint16_t location;
struct rte_flow_action_count act_cnt;
+ bool has_vlan_m;
+ bool has_vlan_v;
+ bool has_more_vlan_m;
+ bool has_more_vlan_v;
};
/* FDIR filter list structure */
diff --git a/drivers/net/hns3/hns3_flow.c b/drivers/net/hns3/hns3_flow.c
index 7fbe65313ca2..37eb2b4c3807 100644
--- a/drivers/net/hns3/hns3_flow.c
+++ b/drivers/net/hns3/hns3_flow.c
@@ -616,8 +616,8 @@ hns3_parse_eth(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
if (item->spec == NULL && item->mask == NULL)
return 0;
- if (item->mask) {
- eth_mask = item->mask;
+ eth_mask = item->mask;
+ if (eth_mask) {
if (eth_mask->hdr.ether_type) {
hns3_set_bit(rule->input_set, INNER_ETH_TYPE, 1);
rule->key_conf.mask.ether_type =
@@ -633,9 +633,16 @@ hns3_parse_eth(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
memcpy(rule->key_conf.mask.dst_mac,
eth_mask->hdr.dst_addr.addr_bytes, RTE_ETHER_ADDR_LEN);
}
+ if (eth_mask->has_vlan)
+ rule->has_vlan_m = true;
}
eth_spec = item->spec;
+ if (eth_mask && eth_mask->has_vlan && eth_spec->has_vlan) {
+ rule->key_conf.vlan_num++;
+ rule->has_vlan_v = true;
+ }
+
rule->key_conf.spec.ether_type = rte_be_to_cpu_16(eth_spec->hdr.ether_type);
memcpy(rule->key_conf.spec.src_mac, eth_spec->hdr.src_addr.addr_bytes,
RTE_ETHER_ADDR_LEN);
@@ -651,6 +658,26 @@ hns3_parse_vlan(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
const struct rte_flow_item_vlan *vlan_spec;
const struct rte_flow_item_vlan *vlan_mask;
+ if (rule->has_vlan_m && !rule->has_vlan_v)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VLAN item is conflict with 'has_vlan is 0' in ETH item");
+
+ if (rule->has_more_vlan_m && !rule->has_more_vlan_v)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "VLAN item is conflict with 'has_more_vlan is 0' in the previous VLAN item");
+
+ if (rule->has_vlan_m && rule->has_vlan_v) {
+ rule->has_vlan_m = false;
+ rule->key_conf.vlan_num--;
+ }
+
+ if (rule->has_more_vlan_m && rule->has_more_vlan_v) {
+ rule->has_more_vlan_m = false;
+ rule->key_conf.vlan_num--;
+ }
+
rule->key_conf.vlan_num++;
if (rule->key_conf.vlan_num > VLAN_TAG_NUM_MAX)
return rte_flow_error_set(error, EINVAL,
@@ -661,8 +688,8 @@ hns3_parse_vlan(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
if (item->spec == NULL && item->mask == NULL)
return 0;
- if (item->mask) {
- vlan_mask = item->mask;
+ vlan_mask = item->mask;
+ if (vlan_mask) {
if (vlan_mask->hdr.vlan_tci) {
if (rule->key_conf.vlan_num == 1) {
hns3_set_bit(rule->input_set, INNER_VLAN_TAG1,
@@ -676,6 +703,8 @@ hns3_parse_vlan(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
rte_be_to_cpu_16(vlan_mask->hdr.vlan_tci);
}
}
+ if (vlan_mask->has_more_vlan)
+ rule->has_more_vlan_m = true;
}
vlan_spec = item->spec;
@@ -685,6 +714,16 @@ hns3_parse_vlan(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
else
rule->key_conf.spec.vlan_tag2 =
rte_be_to_cpu_16(vlan_spec->hdr.vlan_tci);
+
+ if (vlan_mask && vlan_mask->has_more_vlan && vlan_spec->has_more_vlan) {
+ rule->key_conf.vlan_num++;
+ if (rule->key_conf.vlan_num > VLAN_TAG_NUM_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "Vlan_num is more than 2");
+ rule->has_more_vlan_v = true;
+ }
+
return 0;
}
--
2.33.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-07-07 22:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-07-04 2:15 [PATCH] net/hns3: support more VLAN fields matching Jie Hai
2024-07-07 22:44 ` Ferruh Yigit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).