DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, Hemant Agrawal <hemant.agrawal@nxp.com>,
	Sachin Saxena <sachin.saxena@nxp.com>
Cc: Jun Yang <jun.yang@nxp.com>
Subject: [PATCH 01/30] dma/dpaa2: configure route by port by PCIe port param
Date: Fri, 19 Jul 2024 15:30:57 +0530	[thread overview]
Message-ID: <20240719100126.1150373-1-g.singh@nxp.com> (raw)

From: Jun Yang <jun.yang@nxp.com>

struct {
	uint64_t coreid : 4; /**--rbp.sportid / rbp.dportid*/
	uint64_t pfid : 8; /**--rbp.spfid / rbp.dpfid*/
	uint64_t vfen : 1; /**--rbp.svfa / rbp.dvfa*/
	uint64_t vfid : 16; /**--rbp.svfid / rbp.dvfid*/
	.....
} pcie;

Signed-off-by: Jun Yang <jun.yang@nxp.com>
---
 .../bus/fslmc/qbman/include/fsl_qbman_base.h  | 29 ++++++---
 drivers/dma/dpaa2/dpaa2_qdma.c                | 59 +++++++++++++------
 drivers/dma/dpaa2/dpaa2_qdma.h                | 38 +++++++++++-
 drivers/dma/dpaa2/rte_pmd_dpaa2_qdma.h        | 55 +----------------
 drivers/dma/dpaa2/version.map                 |  1 -
 5 files changed, 100 insertions(+), 82 deletions(-)

diff --git a/drivers/bus/fslmc/qbman/include/fsl_qbman_base.h b/drivers/bus/fslmc/qbman/include/fsl_qbman_base.h
index 48ffb1b46e..7528b610e1 100644
--- a/drivers/bus/fslmc/qbman/include/fsl_qbman_base.h
+++ b/drivers/bus/fslmc/qbman/include/fsl_qbman_base.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  * Copyright (C) 2014 Freescale Semiconductor, Inc.
- * Copyright 2017-2019 NXP
+ * Copyright 2017-2024 NXP
  *
  */
 #ifndef _FSL_QBMAN_BASE_H
@@ -141,12 +141,23 @@ struct qbman_fd {
 			uint32_t saddr_hi;
 
 			uint32_t len_sl:18;
-			uint32_t rsv1:14;
-
+			uint32_t rsv13:2;
+			uint32_t svfid:6;
+			uint32_t rsv12:2;
+			uint32_t spfid:2;
+			uint32_t rsv1:2;
 			uint32_t sportid:4;
-			uint32_t rsv2:22;
+			uint32_t rsv2:1;
+			uint32_t sca:1;
+			uint32_t sat:2;
+			uint32_t sattr:3;
+			uint32_t svfa:1;
+			uint32_t stc:3;
 			uint32_t bmt:1;
-			uint32_t rsv3:1;
+			uint32_t dvfid:6;
+			uint32_t rsv3:2;
+			uint32_t dpfid:2;
+			uint32_t rsv31:2;
 			uint32_t fmt:2;
 			uint32_t sl:1;
 			uint32_t rsv4:1;
@@ -154,12 +165,14 @@ struct qbman_fd {
 			uint32_t acc_err:4;
 			uint32_t rsv5:4;
 			uint32_t ser:1;
-			uint32_t rsv6:3;
+			uint32_t rsv6:2;
+			uint32_t wns:1;
 			uint32_t wrttype:4;
 			uint32_t dqos:3;
 			uint32_t drbp:1;
 			uint32_t dlwc:2;
-			uint32_t rsv7:2;
+			uint32_t rsv7:1;
+			uint32_t rns:1;
 			uint32_t rdttype:4;
 			uint32_t sqos:3;
 			uint32_t srbp:1;
@@ -182,7 +195,7 @@ struct qbman_fd {
 			uint32_t saddr_lo;
 
 			uint32_t saddr_hi:17;
-			uint32_t rsv1:15;
+			uint32_t rsv1_att:15;
 
 			uint32_t len;
 
diff --git a/drivers/dma/dpaa2/dpaa2_qdma.c b/drivers/dma/dpaa2/dpaa2_qdma.c
index 2c91ceec13..5954b552b5 100644
--- a/drivers/dma/dpaa2/dpaa2_qdma.c
+++ b/drivers/dma/dpaa2/dpaa2_qdma.c
@@ -22,7 +22,7 @@ uint32_t dpaa2_coherent_alloc_cache;
 static inline int
 qdma_populate_fd_pci(phys_addr_t src, phys_addr_t dest,
 		     uint32_t len, struct qbman_fd *fd,
-		     struct rte_dpaa2_qdma_rbp *rbp, int ser)
+		     struct dpaa2_qdma_rbp *rbp, int ser)
 {
 	fd->simple_pci.saddr_lo = lower_32_bits((uint64_t) (src));
 	fd->simple_pci.saddr_hi = upper_32_bits((uint64_t) (src));
@@ -93,7 +93,7 @@ qdma_populate_fd_ddr(phys_addr_t src, phys_addr_t dest,
 static void
 dpaa2_qdma_populate_fle(struct qbman_fle *fle,
 			uint64_t fle_iova,
-			struct rte_dpaa2_qdma_rbp *rbp,
+			struct dpaa2_qdma_rbp *rbp,
 			uint64_t src, uint64_t dest,
 			size_t len, uint32_t flags, uint32_t fmt)
 {
@@ -114,7 +114,6 @@ dpaa2_qdma_populate_fle(struct qbman_fle *fle,
 		/* source */
 		sdd->read_cmd.portid = rbp->sportid;
 		sdd->rbpcmd_simple.pfid = rbp->spfid;
-		sdd->rbpcmd_simple.vfa = rbp->vfa;
 		sdd->rbpcmd_simple.vfid = rbp->svfid;
 
 		if (rbp->srbp) {
@@ -127,7 +126,6 @@ dpaa2_qdma_populate_fle(struct qbman_fle *fle,
 		/* destination */
 		sdd->write_cmd.portid = rbp->dportid;
 		sdd->rbpcmd_simple.pfid = rbp->dpfid;
-		sdd->rbpcmd_simple.vfa = rbp->vfa;
 		sdd->rbpcmd_simple.vfid = rbp->dvfid;
 
 		if (rbp->drbp) {
@@ -178,7 +176,7 @@ dpdmai_dev_set_fd_us(struct qdma_virt_queue *qdma_vq,
 		     struct rte_dpaa2_qdma_job **job,
 		     uint16_t nb_jobs)
 {
-	struct rte_dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
+	struct dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
 	struct rte_dpaa2_qdma_job **ppjob;
 	size_t iova;
 	int ret = 0, loop;
@@ -276,7 +274,7 @@ dpdmai_dev_set_multi_fd_lf_no_rsp(struct qdma_virt_queue *qdma_vq,
 				  struct rte_dpaa2_qdma_job **job,
 				  uint16_t nb_jobs)
 {
-	struct rte_dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
+	struct dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
 	struct rte_dpaa2_qdma_job **ppjob;
 	uint16_t i;
 	void *elem;
@@ -322,7 +320,7 @@ dpdmai_dev_set_multi_fd_lf(struct qdma_virt_queue *qdma_vq,
 			   struct rte_dpaa2_qdma_job **job,
 			   uint16_t nb_jobs)
 {
-	struct rte_dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
+	struct dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
 	struct rte_dpaa2_qdma_job **ppjob;
 	uint16_t i;
 	int ret;
@@ -375,7 +373,7 @@ dpdmai_dev_set_sg_fd_lf(struct qdma_virt_queue *qdma_vq,
 			struct rte_dpaa2_qdma_job **job,
 			uint16_t nb_jobs)
 {
-	struct rte_dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
+	struct dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
 	struct rte_dpaa2_qdma_job **ppjob;
 	void *elem;
 	struct qbman_fle *fle;
@@ -1223,17 +1221,38 @@ rte_dpaa2_qdma_vchan_internal_sg_enable(int16_t dev_id, uint16_t vchan)
 	qdma_dev->vqs[vchan].flags |= DPAA2_QDMA_VQ_FD_SG_FORMAT;
 }
 
-/* Enable RBP */
-void
-rte_dpaa2_qdma_vchan_rbp_enable(int16_t dev_id, uint16_t vchan,
-				struct rte_dpaa2_qdma_rbp *rbp_config)
+static int
+dpaa2_qdma_vchan_rbp_set(struct qdma_virt_queue *vq,
+	const struct rte_dma_vchan_conf *conf)
 {
-	struct rte_dma_fp_object *obj = &rte_dma_fp_objs[dev_id];
-	struct dpaa2_dpdmai_dev *dpdmai_dev = obj->dev_private;
-	struct qdma_device *qdma_dev = dpdmai_dev->qdma_dev;
+	if (conf->direction == RTE_DMA_DIR_MEM_TO_DEV ||
+		conf->direction == RTE_DMA_DIR_DEV_TO_DEV) {
+		if (conf->dst_port.port_type != RTE_DMA_PORT_PCIE)
+			return -EINVAL;
+		vq->rbp.enable = 1;
+		vq->rbp.dportid = conf->dst_port.pcie.coreid;
+		vq->rbp.dpfid = conf->dst_port.pcie.pfid;
+		if (conf->dst_port.pcie.vfen) {
+			vq->rbp.dvfa = 1;
+			vq->rbp.dvfid = conf->dst_port.pcie.vfid;
+		}
+		vq->rbp.drbp = 1;
+	}
+	if (conf->direction == RTE_DMA_DIR_DEV_TO_MEM ||
+		conf->direction == RTE_DMA_DIR_DEV_TO_DEV) {
+		if (conf->src_port.port_type != RTE_DMA_PORT_PCIE)
+			return -EINVAL;
+		vq->rbp.enable = 1;
+		vq->rbp.sportid = conf->src_port.pcie.coreid;
+		vq->rbp.spfid = conf->src_port.pcie.pfid;
+		if (conf->src_port.pcie.vfen) {
+			vq->rbp.svfa = 1;
+			vq->rbp.dvfid = conf->src_port.pcie.vfid;
+		}
+		vq->rbp.srbp = 1;
+	}
 
-	memcpy(&qdma_dev->vqs[vchan].rbp, rbp_config,
-			sizeof(struct rte_dpaa2_qdma_rbp));
+	return 0;
 }
 
 static int
@@ -1247,12 +1266,16 @@ dpaa2_qdma_vchan_setup(struct rte_dma_dev *dev, uint16_t vchan,
 	char ring_name[32];
 	char pool_name[64];
 	int fd_long_format = 1;
-	int sg_enable = 0;
+	int sg_enable = 0, ret;
 
 	DPAA2_QDMA_FUNC_TRACE();
 
 	RTE_SET_USED(conf_sz);
 
+	ret = dpaa2_qdma_vchan_rbp_set(&qdma_dev->vqs[vchan], conf);
+	if (ret)
+		return ret;
+
 	if (qdma_dev->vqs[vchan].flags & DPAA2_QDMA_VQ_FD_SG_FORMAT)
 		sg_enable = 1;
 
diff --git a/drivers/dma/dpaa2/dpaa2_qdma.h b/drivers/dma/dpaa2/dpaa2_qdma.h
index 5941b5a5d3..811906fcbc 100644
--- a/drivers/dma/dpaa2/dpaa2_qdma.h
+++ b/drivers/dma/dpaa2/dpaa2_qdma.h
@@ -166,6 +166,42 @@ struct qdma_sg_entry {
 	};
 } __rte_packed;
 
+struct dpaa2_qdma_rbp {
+	uint32_t use_ultrashort:1;
+	uint32_t enable:1;
+	/**
+	 * dportid:
+	 * 0000 PCI-Express 1
+	 * 0001 PCI-Express 2
+	 * 0010 PCI-Express 3
+	 * 0011 PCI-Express 4
+	 * 0100 PCI-Express 5
+	 * 0101 PCI-Express 6
+	 */
+	uint32_t dportid:4;
+	uint32_t dpfid:2;
+	uint32_t dvfid:6;
+	uint32_t dvfa:1;
+	/*using route by port for destination */
+	uint32_t drbp:1;
+	/**
+	 * sportid:
+	 * 0000 PCI-Express 1
+	 * 0001 PCI-Express 2
+	 * 0010 PCI-Express 3
+	 * 0011 PCI-Express 4
+	 * 0100 PCI-Express 5
+	 * 0101 PCI-Express 6
+	 */
+	uint32_t sportid:4;
+	uint32_t spfid:2;
+	uint32_t svfid:6;
+	uint32_t svfa:1;
+	/* using route by port for source */
+	uint32_t srbp:1;
+	uint32_t rsv:2;
+};
+
 /** Represents a DPDMAI device */
 struct dpaa2_dpdmai_dev {
 	/** Pointer to Next device instance */
@@ -216,7 +252,7 @@ struct qdma_virt_queue {
 	/** FLE pool for the queue */
 	struct rte_mempool *fle_pool;
 	/** Route by port */
-	struct rte_dpaa2_qdma_rbp rbp;
+	struct dpaa2_qdma_rbp rbp;
 	/** States if this vq is in use or not */
 	uint8_t in_use;
 	/** States if this vq has exclusively associated hw queue */
diff --git a/drivers/dma/dpaa2/rte_pmd_dpaa2_qdma.h b/drivers/dma/dpaa2/rte_pmd_dpaa2_qdma.h
index 5a8da46d12..b0bf9d8bcc 100644
--- a/drivers/dma/dpaa2/rte_pmd_dpaa2_qdma.h
+++ b/drivers/dma/dpaa2/rte_pmd_dpaa2_qdma.h
@@ -13,42 +13,6 @@
 /** States if the destination addresses is physical. */
 #define RTE_DPAA2_QDMA_JOB_DEST_PHY		(1ULL << 31)
 
-struct rte_dpaa2_qdma_rbp {
-	uint32_t use_ultrashort:1;
-	uint32_t enable:1;
-	/**
-	 * dportid:
-	 * 0000 PCI-Express 1
-	 * 0001 PCI-Express 2
-	 * 0010 PCI-Express 3
-	 * 0011 PCI-Express 4
-	 * 0100 PCI-Express 5
-	 * 0101 PCI-Express 6
-	 */
-	uint32_t dportid:4;
-	uint32_t dpfid:2;
-	uint32_t dvfid:6;
-	/*using route by port for destination */
-	uint32_t drbp:1;
-	/**
-	 * sportid:
-	 * 0000 PCI-Express 1
-	 * 0001 PCI-Express 2
-	 * 0010 PCI-Express 3
-	 * 0011 PCI-Express 4
-	 * 0100 PCI-Express 5
-	 * 0101 PCI-Express 6
-	 */
-	uint32_t sportid:4;
-	uint32_t spfid:2;
-	uint32_t svfid:6;
-	/* using route by port for source */
-	uint32_t srbp:1;
-	/* Virtual Function Active */
-	uint32_t vfa:1;
-	uint32_t rsv:3;
-};
-
 /** Determines a QDMA job */
 struct rte_dpaa2_qdma_job {
 	/** Source Address from where DMA is (to be) performed */
@@ -67,6 +31,7 @@ struct rte_dpaa2_qdma_job {
 	 */
 	uint16_t status;
 	uint16_t vq_id;
+	uint64_t cnxt;
 	/**
 	 * FLE pool element maintained by user, in case no qDMA response.
 	 * Note: the address must be allocated from DPDK memory pool.
@@ -104,24 +69,6 @@ void rte_dpaa2_qdma_vchan_fd_us_enable(int16_t dev_id, uint16_t vchan);
 __rte_experimental
 void rte_dpaa2_qdma_vchan_internal_sg_enable(int16_t dev_id, uint16_t vchan);
 
-/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
- * Enable Route-by-port on a channel. This API should be
- * called before calling 'rte_dma_vchan_setup()' API.
- *
- * @param dev_id
- *   The identifier of the device.
- * @param vchan
- *   The identifier of virtual DMA channel.
- * @param rbp_config
- *   Configuration for route-by-port
- */
-__rte_experimental
-void rte_dpaa2_qdma_vchan_rbp_enable(int16_t dev_id, uint16_t vchan,
-		struct rte_dpaa2_qdma_rbp *rbp_config);
-
 /**
  * @warning
  * @b EXPERIMENTAL: this API may change without prior notice.
diff --git a/drivers/dma/dpaa2/version.map b/drivers/dma/dpaa2/version.map
index 713ed41f0c..eb012cfbfc 100644
--- a/drivers/dma/dpaa2/version.map
+++ b/drivers/dma/dpaa2/version.map
@@ -10,5 +10,4 @@ EXPERIMENTAL {
 	rte_dpaa2_qdma_copy_multi;
 	rte_dpaa2_qdma_vchan_fd_us_enable;
 	rte_dpaa2_qdma_vchan_internal_sg_enable;
-	rte_dpaa2_qdma_vchan_rbp_enable;
 };
-- 
2.25.1


             reply	other threads:[~2024-07-19 10:01 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-19 10:00 Gagandeep Singh [this message]
2024-07-19 10:00 ` [PATCH 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-19 10:00 ` [PATCH 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-19 10:01 ` [PATCH 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-19 10:01 ` [PATCH 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-19 10:01 ` [PATCH 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-19 10:01 ` [PATCH 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-19 10:01 ` [PATCH 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-19 10:01 ` [PATCH 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-19 10:01 ` [PATCH 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-19 10:01 ` [PATCH 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-19 10:01 ` [PATCH 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-19 10:01 ` [PATCH 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-19 10:01 ` [PATCH 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-19 10:01 ` [PATCH 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-19 10:01 ` [PATCH 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-19 10:01 ` [PATCH 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-19 10:01 ` [PATCH 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-19 10:01 ` [PATCH 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 11:58 ` [v2 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 11:58   ` [v2 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-22 11:58   ` [v2 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 11:58   ` [v2 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 11:58   ` [v2 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 11:58   ` [v2 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 11:58   ` [v2 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 11:58   ` [v2 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 11:58   ` [v2 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 11:58   ` [v2 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 11:58   ` [v2 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 11:58   ` [v2 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 11:58   ` [v2 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 11:58   ` [v2 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 11:58   ` [v2 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 11:58   ` [v2 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 11:58   ` [v2 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-22 11:58   ` [v2 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 11:58   ` [v2 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 11:58   ` [v2 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 11:58   ` [v2 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 11:58   ` [v2 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 11:58   ` [v2 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 11:58   ` [v2 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 11:58   ` [v2 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 11:58   ` [v2 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 11:58   ` [v2 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-22 11:58   ` [v2 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 11:58   ` [v2 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 11:58   ` [v2 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 11:58   ` [v2 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 16:39   ` [v3 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 16:39     ` [v3 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-22 16:39     ` [v3 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 20:19       ` Stephen Hemminger
2024-07-22 16:39     ` [v3 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 16:39     ` [v3 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 16:39     ` [v3 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 20:21       ` Stephen Hemminger
2024-07-22 16:39     ` [v3 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 16:39     ` [v3 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 16:39     ` [v3 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 16:39     ` [v3 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 16:39     ` [v3 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 16:39     ` [v3 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 16:39     ` [v3 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 16:39     ` [v3 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 16:39     ` [v3 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 16:39     ` [v3 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 16:39     ` [v3 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-22 16:39     ` [v3 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 16:39     ` [v3 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 16:39     ` [v3 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 16:39     ` [v3 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 16:39     ` [v3 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 16:39     ` [v3 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 16:39     ` [v3 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 16:39     ` [v3 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 16:39     ` [v3 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 16:39     ` [v3 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-22 16:39     ` [v3 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 16:39     ` [v3 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 16:39     ` [v3 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 16:39     ` [v3 30/30] bus/dpaa: add port bmi stats Gagandeep Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240719100126.1150373-1-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=jun.yang@nxp.com \
    --cc=sachin.saxena@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).