[PATCH v12 2/3] dts: VLAN test suite implementation

[Dean Marx <dmarx@iol.unh.edu>]

Test suite for verifying VLAN filtering, stripping, and insertion
functionality on Poll Mode Driver.

Signed-off-by: Dean Marx <dmarx@iol.unh.edu>
---
 dts/tests/TestSuite_vlan.py | 168 ++++++++++++++++++++++++++++++++++++
 1 file changed, 168 insertions(+)
 create mode 100644 dts/tests/TestSuite_vlan.py

diff --git a/dts/tests/TestSuite_vlan.py b/dts/tests/TestSuite_vlan.py
new file mode 100644
index 0000000000..3193c559f3
--- /dev/null
+++ b/dts/tests/TestSuite_vlan.py
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2024 University of New Hampshire
+
+"""Test the support of VLAN Offload Features by Poll Mode Drivers.
+
+The test suite ensures that with the correct configuration, a port
+will not drop a VLAN tagged packet. In order for this to be successful,
+packet header stripping and packet receipts must be enabled on the Poll Mode Driver.
+The test suite checks that when these conditions are met, the packet is received without issue.
+The suite also checks to ensure that when these conditions are not met, as in the cases where
+stripping is disabled, or VLAN packet receipts are disabled, the packet is not received.
+Additionally, it checks the case where VLAN header insertion is enabled in transmitted packets,
+which should be successful if the previous cases pass.
+
+"""
+
+from scapy.layers.l2 import Dot1Q, Ether  # type: ignore[import-untyped]
+from scapy.packet import Raw  # type: ignore[import-untyped]
+
+from framework.remote_session.testpmd_shell import SimpleForwardingModes, TestPmdShell
+from framework.test_suite import TestSuite
+
+
+class TestVlan(TestSuite):
+    """DPDK VLAN test suite.
+
+    Ensures VLAN packet reception, stripping, and insertion on the Poll Mode Driver
+    when the appropriate conditions are met. The suite contains four test cases:
+
+    1. VLAN reception no stripping - verifies that a vlan packet with a tag
+    within the filter list is received.
+    2. VLAN reception stripping - verifies that a vlan packet with a tag
+    within the filter list is received without the vlan tag.
+    3. VLAN no reception - verifies that a vlan packet with a tag not within
+    the filter list is dropped.
+    4. VLAN insertion - verifies that a non vlan packet is received with a vlan
+    tag when insertion is enabled.
+    """
+
+    def set_up_suite(self) -> None:
+        """Set up the test suite.
+
+        Setup:
+            Verify that at least two ports are open for session.
+        """
+        self.verify(len(self._port_links) > 1, "Not enough ports")
+
+    def send_vlan_packet_and_verify(self, should_receive: bool, strip: bool, vlan_id: int) -> None:
+        """Generate a vlan packet, send and verify packet with same payload is received on the dut.
+
+        Args:
+            should_receive: Indicate whether the packet should be successfully received.
+            strip: Indicates whether stripping is on or off, and when the vlan tag is
+                checked for a match.
+            vlan_id: Expected vlan ID.
+        """
+        packet = Ether() / Dot1Q(vlan=vlan_id) / Raw(load="xxxxx")
+        received_packets = self.send_packet_and_capture(packet)
+        test_packet = None
+        for packet in received_packets:
+            if b"xxxxx" in packet.load:
+                test_packet = packet
+                break
+        if should_receive:
+            self.verify(
+                test_packet is not None, "Packet was dropped when it should have been received"
+            )
+            if test_packet is not None:
+                if strip:
+                    self.verify(
+                        not test_packet.haslayer(Dot1Q), "Vlan tag was not stripped successfully"
+                    )
+                else:
+                    self.verify(
+                        test_packet.vlan == vlan_id,
+                        "The received tag did not match the expected tag",
+                    )
+        else:
+            self.verify(
+                test_packet is None,
+                "Packet was received when it should have been dropped",
+            )
+
+    def send_packet_and_verify_insertion(self, expected_id: int) -> None:
+        """Generate a packet with no vlan tag, send and verify on the dut.
+
+        Args:
+            expected_id: The vlan id that is being inserted through tx_offload configuration.
+        """
+        packet = Ether() / Raw(load="xxxxx")
+        received_packets = self.send_packet_and_capture(packet)
+        test_packet = None
+        for packet in received_packets:
+            if b"xxxxx" in packet.load:
+                test_packet = packet
+                break
+        self.verify(test_packet is not None, "Packet was dropped when it should have been received")
+        if test_packet is not None:
+            self.verify(test_packet.haslayer(Dot1Q), "The received packet did not have a vlan tag")
+            self.verify(
+                test_packet.vlan == expected_id, "The received tag did not match the expected tag"
+            )
+
+    def vlan_setup(self, testpmd: TestPmdShell, port_id: int, filtered_id: int) -> TestPmdShell:
+        """Setup method for all test cases.
+
+        Args:
+            testpmd: Testpmd shell session to send commands to.
+            port_id: Number of port to use for setup.
+            filtered_id: ID to be added to the vlan filter list.
+
+        Returns:
+            TestPmdShell: Testpmd session being configured.
+        """
+        testpmd.set_forward_mode(SimpleForwardingModes.mac)
+        testpmd.set_promisc(port_id, False)
+        testpmd.vlan_filter_set(port=port_id, on=True)
+        testpmd.rx_vlan(vlan=filtered_id, port=port_id, add=True)
+        return testpmd
+
+    def test_vlan_receipt_no_stripping(self) -> None:
+        """Ensure vlan packet is dropped when receipts are enabled and header stripping is disabled.
+
+        Test:
+            Create an interactive testpmd shell and verify a vlan packet.
+        """
+        with TestPmdShell(node=self.sut_node) as testpmd:
+            testpmd = self.vlan_setup(testpmd=testpmd, port_id=0, filtered_id=1)
+            testpmd.start()
+            self.send_vlan_packet_and_verify(True, strip=False, vlan_id=1)
+
+    def test_vlan_receipt_stripping(self) -> None:
+        """Ensure vlan packet received with no tag when receipts and header stripping are enabled.
+
+        Test:
+            Create an interactive testpmd shell and verify a vlan packet.
+        """
+        with TestPmdShell(node=self.sut_node) as testpmd:
+            testpmd = self.vlan_setup(testpmd=testpmd, port_id=0, filtered_id=1)
+            testpmd.vlan_strip_set(port=0, on=True)
+            testpmd.start()
+            self.send_vlan_packet_and_verify(should_receive=True, strip=True, vlan_id=1)
+
+    def test_vlan_no_receipt(self) -> None:
+        """Ensure vlan packet dropped when filter is on and sent tag not in the filter list.
+
+        Test:
+            Create an interactive testpmd shell and verify a vlan packet.
+        """
+        with TestPmdShell(node=self.sut_node) as testpmd:
+            testpmd = self.vlan_setup(testpmd=testpmd, port_id=0, filtered_id=1)
+            testpmd.start()
+            self.send_vlan_packet_and_verify(should_receive=False, strip=False, vlan_id=2)
+
+    def test_vlan_header_insertion(self) -> None:
+        """Ensure that vlan packet is received with the correct inserted vlan tag.
+
+        Test:
+            Create an interactive testpmd shell and verify a non-vlan packet.
+        """
+        with TestPmdShell(node=self.sut_node) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.mac)
+            testpmd.set_promisc(port=0, on=False)
+            testpmd.port_stop_all()
+            testpmd.tx_vlan_set(port=1, vlan=51)
+            testpmd.port_start_all()
+            testpmd.start()
+            self.send_packet_and_verify_insertion(expected_id=51)
-- 
2.44.0