* [PATCH] examples/l3fwd: fix read beyond array bondaries
@ 2024-07-26 19:43 Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 0/2] examples/l3fwd fixes for ACL mode Konstantin Ananyev
0 siblings, 1 reply; 4+ messages in thread
From: Konstantin Ananyev @ 2024-07-26 19:43 UTC (permalink / raw)
To: dev; +Cc: Konstantin Ananyev, stable
From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
ASAN report:
ERROR: AddressSanitizer: unknown-crash on address 0x7ffffef92e32 at pc 0x00000053d1e9 bp 0x7ffffef92c00 sp 0x7ffffef92bf8
READ of size 16 at 0x7ffffef92e32 thread T0
#0 0x53d1e8 in _mm_loadu_si128 /usr/lib64/gcc/x86_64-suse-linux/11/include/emmintrin.h:703
#1 0x53d1e8 in send_packets_multi ../examples/l3fwd/l3fwd_sse.h:125
#2 0x53d1e8 in acl_send_packets ../examples/l3fwd/l3fwd_acl.c:1048
#3 0x53ec18 in acl_main_loop ../examples/l3fwd/l3fwd_acl.c:1127
#4 0x12151eb in rte_eal_mp_remote_launch ../lib/eal/common/eal_common_launch.c:83
#5 0x5bf2df in main ../examples/l3fwd/main.c:1647
#6 0x7f6d42a0d2bc in __libc_start_main (/lib64/libc.so.6+0x352bc)
#7 0x527499 in _start (/home/kananyev/dpdk-l3fwd-acl/x86_64-native-linuxapp-gcc-dbg-b1/examples/dpdk-l3fwd+0x527499)
Reason for that is that send_packets_multi() uses 16B loads to access
input dst_port[]and might read beyond array boundaries.
Right now, it doesn't cause any real issue - junk values are ignored, also
inside l3fwd we always allocate dst_port[] array on the stack, so
memory beyond it is always available.
Anyway, it probably need to be fixed.
The patch below simply allocates extra space for dst_port[], so
send_packets_multi() will never read beyond its boundaries.
Probably a better fix would be to change send_packets_multi()
itself to avoid access beyond 'nb_rx' entries.
Bugzilla ID: 1502
Fixes: 94c54b4158d5 ("examples/l3fwd: rework exact-match")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_altivec.h | 6 +++++-
examples/l3fwd/l3fwd_common.h | 7 +++++++
examples/l3fwd/l3fwd_em_hlm.h | 2 +-
examples/l3fwd/l3fwd_em_sequential.h | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm_altivec.h | 2 +-
examples/l3fwd/l3fwd_lpm_neon.h | 2 +-
examples/l3fwd/l3fwd_lpm_sse.h | 2 +-
examples/l3fwd/l3fwd_neon.h | 6 +++++-
examples/l3fwd/l3fwd_sse.h | 6 +++++-
11 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef7..baa01e6dde 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1056,7 +1056,7 @@ int
acl_main_loop(__rte_unused void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- uint16_t hops[MAX_PKT_BURST];
+ uint16_t hops[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
unsigned int lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
int i, nb_rx;
diff --git a/examples/l3fwd/l3fwd_altivec.h b/examples/l3fwd/l3fwd_altivec.h
index e45e138e59..b91a6b5587 100644
--- a/examples/l3fwd/l3fwd_altivec.h
+++ b/examples/l3fwd/l3fwd_altivec.h
@@ -11,6 +11,9 @@
#include "altivec/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -117,7 +120,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_common.h b/examples/l3fwd/l3fwd_common.h
index 224b1c08e8..d94e5f1357 100644
--- a/examples/l3fwd/l3fwd_common.h
+++ b/examples/l3fwd/l3fwd_common.h
@@ -18,6 +18,13 @@
/* Minimum value of IPV4 total length (20B) in network byte order. */
#define IPV4_MIN_LEN_BE (sizeof(struct rte_ipv4_hdr) << 8)
+/*
+ * send_packet_multi() specific number of dest ports
+ * due to implementation we need to allocate array bigger then
+ * actual max number of elements in the array.
+ */
+#define SENDM_PORT_OVERHEAD(x) (x)
+
/*
* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2:
* - The IP version number must be 4.
diff --git a/examples/l3fwd/l3fwd_em_hlm.h b/examples/l3fwd/l3fwd_em_hlm.h
index 31cda9ddc1..c1d819997a 100644
--- a/examples/l3fwd/l3fwd_em_hlm.h
+++ b/examples/l3fwd/l3fwd_em_hlm.h
@@ -249,7 +249,7 @@ static inline void
l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_em_process_packets(nb_rx, pkts_burst, dst_port, portid, qconf, 0);
send_packets_multi(qconf, pkts_burst, dst_port, nb_rx);
diff --git a/examples/l3fwd/l3fwd_em_sequential.h b/examples/l3fwd/l3fwd_em_sequential.h
index 067f23889a..3a40b2e434 100644
--- a/examples/l3fwd/l3fwd_em_sequential.h
+++ b/examples/l3fwd/l3fwd_em_sequential.h
@@ -79,7 +79,7 @@ l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
uint16_t portid, struct lcore_conf *qconf)
{
int32_t i, j;
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
if (nb_rx > 0) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[0],
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index f38b19af3f..a36330119a 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -121,7 +121,7 @@ fib_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
{
uint32_t ipv4_arr[nb_rx];
uint8_t ipv6_arr[nb_rx][RTE_FIB6_IPV6_ADDR_SIZE];
- uint16_t hops[nb_rx];
+ uint16_t hops[SENDM_PORT_OVERHEAD(nb_rx)];
uint64_t hopsv4[nb_rx], hopsv6[nb_rx];
uint8_t type_arr[nb_rx];
uint32_t ipv4_cnt = 0, ipv6_cnt = 0;
diff --git a/examples/l3fwd/l3fwd_lpm_altivec.h b/examples/l3fwd/l3fwd_lpm_altivec.h
index adb82f1478..91aad5c313 100644
--- a/examples/l3fwd/l3fwd_lpm_altivec.h
+++ b/examples/l3fwd/l3fwd_lpm_altivec.h
@@ -145,7 +145,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint8_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_neon.h b/examples/l3fwd/l3fwd_lpm_neon.h
index 2a68c4c15e..3c1f827424 100644
--- a/examples/l3fwd/l3fwd_lpm_neon.h
+++ b/examples/l3fwd/l3fwd_lpm_neon.h
@@ -171,7 +171,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_sse.h b/examples/l3fwd/l3fwd_lpm_sse.h
index db15030320..50f1abbd8a 100644
--- a/examples/l3fwd/l3fwd_lpm_sse.h
+++ b/examples/l3fwd/l3fwd_lpm_sse.h
@@ -129,7 +129,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_neon.h b/examples/l3fwd/l3fwd_neon.h
index 40807d5965..bc2bab8265 100644
--- a/examples/l3fwd/l3fwd_neon.h
+++ b/examples/l3fwd/l3fwd_neon.h
@@ -10,6 +10,9 @@
#include "neon/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -92,7 +95,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_sse.h b/examples/l3fwd/l3fwd_sse.h
index 083729cdef..6236b7873c 100644
--- a/examples/l3fwd/l3fwd_sse.h
+++ b/examples/l3fwd/l3fwd_sse.h
@@ -10,6 +10,9 @@
#include "sse/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -91,7 +94,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
--
2.35.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 0/2] examples/l3fwd fixes for ACL mode
2024-07-26 19:43 [PATCH] examples/l3fwd: fix read beyond array bondaries Konstantin Ananyev
@ 2024-07-30 12:22 ` Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 1/2] examples/l3fwd: fix read beyond array bondaries Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 2/2] examples/l3fwd: fix read beyond array boundaries in ACL mode Konstantin Ananyev
0 siblings, 2 replies; 4+ messages in thread
From: Konstantin Ananyev @ 2024-07-30 12:22 UTC (permalink / raw)
To: dev; +Cc: songx.jiale, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
As Song Jiale pointed outprevious fix is not enough to fix
the problem he is observing with l3fwd in ACl mode:
https://bugs.dpdk.org/show_bug.cgi?id=1502
This is a second attempt to fix it.
Konstantin Ananyev (2):
examples/l3fwd: fix read beyond array bondaries
examples/l3fwd: fix read beyond array boundaries in ACL mode
examples/l3fwd/l3fwd_acl.c | 37 ++++++++++++++++++++--------
examples/l3fwd/l3fwd_altivec.h | 6 ++++-
examples/l3fwd/l3fwd_common.h | 7 ++++++
examples/l3fwd/l3fwd_em_hlm.h | 2 +-
examples/l3fwd/l3fwd_em_sequential.h | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm_altivec.h | 2 +-
examples/l3fwd/l3fwd_lpm_neon.h | 2 +-
examples/l3fwd/l3fwd_lpm_sse.h | 2 +-
examples/l3fwd/l3fwd_neon.h | 6 ++++-
examples/l3fwd/l3fwd_sse.h | 6 ++++-
11 files changed, 55 insertions(+), 19 deletions(-)
--
2.35.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] examples/l3fwd: fix read beyond array bondaries
2024-07-30 12:22 ` [PATCH v2 0/2] examples/l3fwd fixes for ACL mode Konstantin Ananyev
@ 2024-07-30 12:22 ` Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 2/2] examples/l3fwd: fix read beyond array boundaries in ACL mode Konstantin Ananyev
1 sibling, 0 replies; 4+ messages in thread
From: Konstantin Ananyev @ 2024-07-30 12:22 UTC (permalink / raw)
To: dev; +Cc: songx.jiale, Konstantin Ananyev, stable
From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
ASAN report:
ERROR: AddressSanitizer: unknown-crash on address 0x7ffffef92e32 at pc 0x00000053d1e9 bp 0x7ffffef92c00 sp 0x7ffffef92bf8
READ of size 16 at 0x7ffffef92e32 thread T0
#0 0x53d1e8 in _mm_loadu_si128 /usr/lib64/gcc/x86_64-suse-linux/11/include/emmintrin.h:703
#1 0x53d1e8 in send_packets_multi ../examples/l3fwd/l3fwd_sse.h:125
#2 0x53d1e8 in acl_send_packets ../examples/l3fwd/l3fwd_acl.c:1048
#3 0x53ec18 in acl_main_loop ../examples/l3fwd/l3fwd_acl.c:1127
#4 0x12151eb in rte_eal_mp_remote_launch ../lib/eal/common/eal_common_launch.c:83
#5 0x5bf2df in main ../examples/l3fwd/main.c:1647
#6 0x7f6d42a0d2bc in __libc_start_main (/lib64/libc.so.6+0x352bc)
#7 0x527499 in _start (/home/kananyev/dpdk-l3fwd-acl/x86_64-native-linuxapp-gcc-dbg-b1/examples/dpdk-l3fwd+0x527499)
Reason for that is that send_packets_multi() uses 16B loads to access
input dst_port[]and might read beyond array boundaries.
Right now, it doesn't cause any real issue - junk values are ignored, also
inside l3fwd we always allocate dst_port[] array on the stack, so
memory beyond it is always available.
Anyway, it probably need to be fixed.
The patch below simply allocates extra space for dst_port[], so
send_packets_multi() will never read beyond its boundaries.
Probably a better fix would be to change send_packets_multi()
itself to avoid access beyond 'nb_rx' entries.
Bugzilla ID: 1502
Fixes: 94c54b4158d5 ("examples/l3fwd: rework exact-match")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_altivec.h | 6 +++++-
examples/l3fwd/l3fwd_common.h | 7 +++++++
examples/l3fwd/l3fwd_em_hlm.h | 2 +-
examples/l3fwd/l3fwd_em_sequential.h | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm_altivec.h | 2 +-
examples/l3fwd/l3fwd_lpm_neon.h | 2 +-
examples/l3fwd/l3fwd_lpm_sse.h | 2 +-
examples/l3fwd/l3fwd_neon.h | 6 +++++-
examples/l3fwd/l3fwd_sse.h | 6 +++++-
11 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef7..baa01e6dde 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1056,7 +1056,7 @@ int
acl_main_loop(__rte_unused void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- uint16_t hops[MAX_PKT_BURST];
+ uint16_t hops[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
unsigned int lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
int i, nb_rx;
diff --git a/examples/l3fwd/l3fwd_altivec.h b/examples/l3fwd/l3fwd_altivec.h
index e45e138e59..b91a6b5587 100644
--- a/examples/l3fwd/l3fwd_altivec.h
+++ b/examples/l3fwd/l3fwd_altivec.h
@@ -11,6 +11,9 @@
#include "altivec/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -117,7 +120,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_common.h b/examples/l3fwd/l3fwd_common.h
index 224b1c08e8..d94e5f1357 100644
--- a/examples/l3fwd/l3fwd_common.h
+++ b/examples/l3fwd/l3fwd_common.h
@@ -18,6 +18,13 @@
/* Minimum value of IPV4 total length (20B) in network byte order. */
#define IPV4_MIN_LEN_BE (sizeof(struct rte_ipv4_hdr) << 8)
+/*
+ * send_packet_multi() specific number of dest ports
+ * due to implementation we need to allocate array bigger then
+ * actual max number of elements in the array.
+ */
+#define SENDM_PORT_OVERHEAD(x) (x)
+
/*
* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2:
* - The IP version number must be 4.
diff --git a/examples/l3fwd/l3fwd_em_hlm.h b/examples/l3fwd/l3fwd_em_hlm.h
index 31cda9ddc1..c1d819997a 100644
--- a/examples/l3fwd/l3fwd_em_hlm.h
+++ b/examples/l3fwd/l3fwd_em_hlm.h
@@ -249,7 +249,7 @@ static inline void
l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_em_process_packets(nb_rx, pkts_burst, dst_port, portid, qconf, 0);
send_packets_multi(qconf, pkts_burst, dst_port, nb_rx);
diff --git a/examples/l3fwd/l3fwd_em_sequential.h b/examples/l3fwd/l3fwd_em_sequential.h
index 067f23889a..3a40b2e434 100644
--- a/examples/l3fwd/l3fwd_em_sequential.h
+++ b/examples/l3fwd/l3fwd_em_sequential.h
@@ -79,7 +79,7 @@ l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
uint16_t portid, struct lcore_conf *qconf)
{
int32_t i, j;
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
if (nb_rx > 0) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[0],
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index f38b19af3f..a36330119a 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -121,7 +121,7 @@ fib_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
{
uint32_t ipv4_arr[nb_rx];
uint8_t ipv6_arr[nb_rx][RTE_FIB6_IPV6_ADDR_SIZE];
- uint16_t hops[nb_rx];
+ uint16_t hops[SENDM_PORT_OVERHEAD(nb_rx)];
uint64_t hopsv4[nb_rx], hopsv6[nb_rx];
uint8_t type_arr[nb_rx];
uint32_t ipv4_cnt = 0, ipv6_cnt = 0;
diff --git a/examples/l3fwd/l3fwd_lpm_altivec.h b/examples/l3fwd/l3fwd_lpm_altivec.h
index adb82f1478..91aad5c313 100644
--- a/examples/l3fwd/l3fwd_lpm_altivec.h
+++ b/examples/l3fwd/l3fwd_lpm_altivec.h
@@ -145,7 +145,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint8_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_neon.h b/examples/l3fwd/l3fwd_lpm_neon.h
index 2a68c4c15e..3c1f827424 100644
--- a/examples/l3fwd/l3fwd_lpm_neon.h
+++ b/examples/l3fwd/l3fwd_lpm_neon.h
@@ -171,7 +171,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_sse.h b/examples/l3fwd/l3fwd_lpm_sse.h
index db15030320..50f1abbd8a 100644
--- a/examples/l3fwd/l3fwd_lpm_sse.h
+++ b/examples/l3fwd/l3fwd_lpm_sse.h
@@ -129,7 +129,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_neon.h b/examples/l3fwd/l3fwd_neon.h
index 40807d5965..bc2bab8265 100644
--- a/examples/l3fwd/l3fwd_neon.h
+++ b/examples/l3fwd/l3fwd_neon.h
@@ -10,6 +10,9 @@
#include "neon/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -92,7 +95,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_sse.h b/examples/l3fwd/l3fwd_sse.h
index 083729cdef..6236b7873c 100644
--- a/examples/l3fwd/l3fwd_sse.h
+++ b/examples/l3fwd/l3fwd_sse.h
@@ -10,6 +10,9 @@
#include "sse/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -91,7 +94,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
--
2.35.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] examples/l3fwd: fix read beyond array boundaries in ACL mode
2024-07-30 12:22 ` [PATCH v2 0/2] examples/l3fwd fixes for ACL mode Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 1/2] examples/l3fwd: fix read beyond array bondaries Konstantin Ananyev
@ 2024-07-30 12:22 ` Konstantin Ananyev
1 sibling, 0 replies; 4+ messages in thread
From: Konstantin Ananyev @ 2024-07-30 12:22 UTC (permalink / raw)
To: dev; +Cc: songx.jiale, Konstantin Ananyev
From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
With commit: ACL mode now can use send_packets_multi().
What I missed with that changes: send_packets_multi() can't deal
properly with input dst_port[i] == BAD_PORT (though it can set
it itself), as it uses dst_port[i] values to read L2 addresses for the port
and assumes dst_port[] to contain valid only values.
To fix that just add a check that all dst_port[] entries are valid before
calling : send_packets_multi(). Otherwhise use send_packets_single().
An alternative, and probably more logical approach would be to
re-arrange send_packets_multi() so that it updates L2 packet headers
at the very last state - when dst_port[] are finialized.
But that would affect all other modes, but that would affect all other
modes and will require much more code changes and testing.
Bugzilla ID: 1502
Fixes: aa7c6077c19b ("examples/l3fwd: avoid packets reorder in ACL mode")
Reported-by: Song Jiale <songx.jiale@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
examples/l3fwd/l3fwd_acl.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index baa01e6dde..45013ac06e 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -993,11 +993,15 @@ dump_denied_pkt(const struct rte_mbuf *pkt, uint32_t res)
#endif
}
-static inline void
+/*
+ * run packets through ACL classify.
+ * returns number of packets to be dropped (hops[i] == BAD_PORT)
+ */
+static inline uint32_t
acl_process_pkts(struct rte_mbuf *pkts[MAX_PKT_BURST],
uint16_t hops[MAX_PKT_BURST], uint32_t num, int32_t socketid)
{
- uint32_t i, n4, n6, res;
+ uint32_t i, k, n4, n6, res;
struct acl_search_t acl_search;
/* split packets burst depending on packet type (IPv4/IPv6) */
@@ -1020,6 +1024,7 @@ acl_process_pkts(struct rte_mbuf *pkts[MAX_PKT_BURST],
/* combine lookup results back, into one array of next hops */
n4 = 0;
n6 = 0;
+ k = 0;
for (i = 0; i != num; i++) {
switch (acl_search.types[i]) {
case TYPE_IPV4:
@@ -1034,21 +1039,33 @@ acl_process_pkts(struct rte_mbuf *pkts[MAX_PKT_BURST],
if (likely((res & ACL_DENY_SIGNATURE) == 0 && res != 0))
hops[i] = res - FWD_PORT_SHIFT;
else {
+ /* bad or deined by ACL rule packets */
hops[i] = BAD_PORT;
dump_denied_pkt(pkts[i], res);
+ k++;
}
}
+
+ return k;
}
+/*
+ * send_packets_multi() can't deal properly with hops[i] == BAD_PORT
+ * (it assumes input hops[] contain only valid port numbers),
+ * so it is ok to use it only when there are no denied packets.
+ */
static inline void
acl_send_packets(struct lcore_conf *qconf, struct rte_mbuf *pkts[],
- uint16_t hops[], uint32_t num)
+ uint16_t hops[], uint32_t num, uint32_t nb_drop)
{
#if defined ACL_SEND_MULTI
- send_packets_multi(qconf, pkts, hops, num);
+ if (nb_drop == 0)
+ send_packets_multi(qconf, pkts, hops, num);
+ else
#else
- send_packets_single(qconf, pkts, hops, num);
+ RTE_SET_USED(nb_drop);
#endif
+ send_packets_single(qconf, pkts, hops, num);
}
/* main processing loop */
@@ -1059,7 +1076,7 @@ acl_main_loop(__rte_unused void *dummy)
uint16_t hops[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
unsigned int lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
- int i, nb_rx;
+ int i, nb_drop, nb_rx;
uint16_t portid;
uint16_t queueid;
struct lcore_conf *qconf;
@@ -1122,10 +1139,10 @@ acl_main_loop(__rte_unused void *dummy)
pkts_burst, MAX_PKT_BURST);
if (nb_rx > 0) {
- acl_process_pkts(pkts_burst, hops, nb_rx,
- socketid);
+ nb_drop = acl_process_pkts(pkts_burst, hops,
+ nb_rx, socketid);
acl_send_packets(qconf, pkts_burst, hops,
- nb_rx);
+ nb_rx, nb_drop);
}
}
}
--
2.35.3
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-07-30 13:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-07-26 19:43 [PATCH] examples/l3fwd: fix read beyond array bondaries Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 0/2] examples/l3fwd fixes for ACL mode Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 1/2] examples/l3fwd: fix read beyond array bondaries Konstantin Ananyev
2024-07-30 12:22 ` [PATCH v2 2/2] examples/l3fwd: fix read beyond array boundaries in ACL mode Konstantin Ananyev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).