DPDK patches and discussions
 help / color / mirror / Atom feed
From: Dean Marx <dmarx@iol.unh.edu>
To: probb@iol.unh.edu, npratte@iol.unh.edu, jspewock@iol.unh.edu,
	luca.vizzarro@arm.com, yoan.picchi@foss.arm.com,
	Honnappa.Nagarahalli@arm.com, paul.szczepanek@arm.com,
	juraj.linkes@pantheon.tech
Cc: dev@dpdk.org, Dean Marx <dmarx@iol.unh.edu>
Subject: [PATCH v1 2/2] dts: checksum offload test suite
Date: Mon, 12 Aug 2024 09:39:36 -0400	[thread overview]
Message-ID: <20240812133936.26344-3-dmarx@iol.unh.edu> (raw)
In-Reply-To: <20240812133936.26344-1-dmarx@iol.unh.edu>

test suite for verifying layer 3/4 checksum offload
features on poll mode driver.

Depends-on: patch-142762
("dts: add text parser for testpmd verbose output")
Depends-on: patch-142691
("dts: add send_packets to test suites and rework packet addressing")

Signed-off-by: Dean Marx <dmarx@iol.unh.edu>
---
 dts/framework/config/conf_yaml_schema.json    |   3 +-
 dts/framework/remote_session/testpmd_shell.py |   2 +-
 dts/tests/TestSuite_checksum_offload.py       | 288 ++++++++++++++++++
 3 files changed, 291 insertions(+), 2 deletions(-)
 create mode 100644 dts/tests/TestSuite_checksum_offload.py

diff --git a/dts/framework/config/conf_yaml_schema.json b/dts/framework/config/conf_yaml_schema.json
index f02a310bb5..a83a6786df 100644
--- a/dts/framework/config/conf_yaml_schema.json
+++ b/dts/framework/config/conf_yaml_schema.json
@@ -187,7 +187,8 @@
       "enum": [
         "hello_world",
         "os_udp",
-        "pmd_buffer_scatter"
+        "pmd_buffer_scatter",
+        "checksum_offload"
       ]
     },
     "test_target": {
diff --git a/dts/framework/remote_session/testpmd_shell.py b/dts/framework/remote_session/testpmd_shell.py
index be8fbdc295..01f378acc3 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -856,7 +856,7 @@ def csum_set_hw(self, layer: str, port_id: int, verify: bool = True) -> None:
             InteractiveCommandExecutionError: If checksum offload is not enabled successfully.
         """
         csum_output = self.send_command(f"csum set {layer} hw {port_id}")
-        if (verify and ("Bad arguments" in csum_output or f"Please stop port {port_id} first")):
+        if (verify and ("Bad arguments" in csum_output or f"Please stop port {port_id} first" in csum_output)):
             self._logger.debug(f"Failed to set csum hw mode on port {port_id}:\n{csum_output}")
             raise InteractiveCommandExecutionError(
                 f"Failed to set csum hw mode on port {port_id}"
diff --git a/dts/tests/TestSuite_checksum_offload.py b/dts/tests/TestSuite_checksum_offload.py
new file mode 100644
index 0000000000..7ce5897c34
--- /dev/null
+++ b/dts/tests/TestSuite_checksum_offload.py
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2024 University of New Hampshire
+
+"""DPDK checksum offload testing suite.
+
+This suite verifies L3/L4 checksum offload features of the Poll Mode Driver.
+On the Rx side, IPv4 and UDP/TCP checksum by hardware is checked to ensure
+checksum flags match expected flags. On the Tx side, IPv4/UDP, IPv4/TCP,
+IPv6/UDP, and IPv6/TCP insertion by hardware is checked to checksum flags
+match expected flags.
+
+"""
+
+from typing import List
+
+from scapy.all import Packet  # type: ignore[import-untyped]
+from scapy.layers.inet import GRE, IP, TCP, UDP  # type: ignore[import-untyped]
+from scapy.layers.inet6 import IPv6  # type: ignore[import-untyped]
+from scapy.layers.l2 import Dot1Q  # type: ignore[import-untyped]
+from scapy.layers.l2 import Ether  # type: ignore[import-untyped]
+from scapy.layers.vxlan import VXLAN  # type: ignore[import-untyped]
+from scapy.packet import Raw  # type: ignore[import-untyped]
+
+from framework.remote_session.testpmd_shell import (
+    SimpleForwardingModes,
+    TestPmdShell,
+    VerboseOLFlag,
+)
+from framework.test_suite import TestSuite
+
+
+class TestChecksumOffload(TestSuite):
+    """Checksum offload test suite.
+
+    This suite consists of 8 test cases:
+    1. Insert checksum on transmit packet
+    2. Do not insert checksum on transmit packet
+    3. Validate Rx checksum valid flags
+    4. Hardware checksum check L4 Rx
+    5. Hardware checksum check L3 Rx
+    6. Hardware checksum check L4 Tx
+    7. Hardware checksum check L3 Tx
+    8. Checksum offload with vlan
+
+    """
+
+    def set_up_suite(self) -> None:
+        """Set up the test suite.
+
+        Setup:
+            Verify that at least two port links are created when the
+            test run is initialized.
+        """
+        self.verify(len(self._port_links) > 1, "Not enough port links.")
+
+    def send_packet_and_verify(
+        self, packet_list: List[Packet], load: str, should_receive: bool
+    ) -> None:
+        """Send and verify packet is received on the traffic generator.
+
+        Args:
+            packet: Scapy packet to send and verify.
+            load: Raw layer load attribute in the sent packet.
+            should_receive: Indicates whether the packet should be received by the traffic generator.
+        """
+        for i in range(0, len(packet_list)):
+            received_packets = self.send_packet_and_capture(packet=packet_list[i])
+            received = any(
+                packet.haslayer(Raw) and load in str(packet.load) for packet in received_packets
+            )
+            self.verify(
+                received == should_receive,
+                f"Packet was {'dropped' if should_receive else 'received'}",
+            )
+
+    def send_packet_and_verify_checksum(
+        self, packet: Packet, goodL4: bool, goodIP: bool, testpmd: TestPmdShell
+    ) -> None:
+        """Send packet and verify verbose output matches expected output.
+
+        Args:
+            packet: Scapy packet to send to DUT.
+            goodL4: Verifies RTE_MBUF_F_RX_L4_CKSUM_GOOD in verbose output
+                if :data:`True`, or RTE_MBUF_F_RX_L4_CKSUM_UNKOWN if :data:`False`.
+            goodIP: Verifies RTE_MBUF_F_RX_IP_CKSUM_GOOD in verbose output
+                if :data:`True`, or RTE_MBUF_F_RX_IP_CKSUM_UNKOWN if :data:`False`.
+            testpmd: Testpmd shell session to analyze verbose output of.
+        """
+        testpmd.start()
+        self.send_packet_and_capture(packet=packet)
+        verbose_output = testpmd.extract_verbose_output(testpmd.stop())
+        isL4 = any(
+            VerboseOLFlag.RTE_MBUF_F_RX_L4_CKSUM_GOOD in packet.ol_flags
+            for index in verbose_output
+            for packet in index.packets
+        )
+        isIP = any(
+            VerboseOLFlag.RTE_MBUF_F_RX_IP_CKSUM_GOOD in packet.ol_flags
+            for index in verbose_output
+            for packet in index.packets
+        )
+        self.verify(isL4 == goodL4, "Layer 4 checksum flag did not match expected checksum flag.")
+        self.verify(isIP == goodIP, "IP checksum flag did not match expected checksum flag.")
+
+    def setup_hw_offload(self, testpmd: TestPmdShell) -> None:
+        """Sets IP, UDP, TCP, and SCTP layers to hardware offload."""
+        testpmd.port_stop(port=0)
+        testpmd.csum_set_hw(layer="ip", port_id=0)
+        testpmd.csum_set_hw(layer="udp", port_id=0)
+        testpmd.csum_set_hw(layer="tcp", port_id=0)
+        testpmd.port_start(port=0)
+
+    def test_insert_checksums(self) -> None:
+        """Enable checksum offload insertion and verify packet reception."""
+        packet_list = [
+            Ether() / IP() / UDP() / Raw("xxxxx"),
+            Ether() / IP() / TCP() / Raw("xxxxx"),
+            Ether() / IPv6(src="::1") / UDP() / Raw("xxxxx"),
+            Ether() / IPv6(src="::1") / TCP() / Raw("xxxxx"),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            self.setup_hw_offload(testpmd=testpmd)
+            testpmd.start()
+            self.send_packet_and_verify(packet_list=packet_list, load="xxxxx", should_receive=True)
+            for i in range(0, len(packet_list)):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=True, testpmd=testpmd
+                )
+
+    def test_no_insert_checksums(self) -> None:
+        """Enable checksum offload insertion and verify packet reception."""
+        packet_list = [
+            Ether() / IP() / UDP() / Raw("xxxxx"),
+            Ether() / IP() / TCP() / Raw("xxxxx"),
+            Ether() / IPv6(src="::1") / UDP() / Raw("xxxxx"),
+            Ether() / IPv6(src="::1") / TCP() / Raw("xxxxx"),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            testpmd.start()
+            self.send_packet_and_verify(packet_list=packet_list, load="xxxxx", should_receive=True)
+            for i in range(0, len(packet_list)):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=True, testpmd=testpmd
+                )
+
+    def test_validate_rx_checksum(self) -> None:
+        """Verify verbose output of Rx packets matches expected behavior."""
+        packet_list = [
+            Ether() / IP() / UDP(),
+            Ether() / IP() / TCP(),
+            Ether() / IPv6(src="::1") / UDP(),
+            Ether() / IPv6(src="::1") / TCP(),
+            Ether() / IP(chksum=0x0) / UDP(chksum=0xF),
+            Ether() / IP(chksum=0x0) / TCP(chksum=0xF),
+            Ether() / IPv6(src="::1") / UDP(chksum=0xF),
+            Ether() / IPv6(src="::1") / TCP(chksum=0xF),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            self.setup_hw_offload(testpmd=testpmd)
+            for i in range(0, 4):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=True, testpmd=testpmd
+                )
+            for i in range(4, 6):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=False, goodIP=False, testpmd=testpmd
+                )
+            for i in range(6, 8):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=False, goodIP=True, testpmd=testpmd
+                )
+
+    def test_l4_rx_checksum(self) -> None:
+        """Tests L4 Rx checksum in a variety of scenarios."""
+        packet_list = [
+            Ether() / IP() / UDP(),
+            Ether() / IP() / TCP(),
+            Ether() / IP() / UDP(chksum=0xF),
+            Ether() / IP() / TCP(chksum=0xF),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            self.setup_hw_offload(testpmd=testpmd)
+            for i in range(0, 2):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=True, testpmd=testpmd
+                )
+            for i in range(2, 4):
+                # Originally had False for goodIP in the test plan, but that doesn't logically make sense
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=False, goodIP=True, testpmd=testpmd
+                )
+
+    def test_l3_rx_checksum(self) -> None:
+        """Tests L3 Rx checksum hardware offload."""
+        packet_list = [
+            Ether() / IP() / UDP(),
+            Ether() / IP() / TCP(),
+            Ether() / IP(chksum=0xF) / UDP(),
+            Ether() / IP(chksum=0xF) / TCP(),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            self.setup_hw_offload(testpmd=testpmd)
+            for i in range(0, 2):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=True, testpmd=testpmd
+                )
+            for i in range(2, 4):
+                # Originally had False for goodL4 in the test plan, but that doesn't logically make sense
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=True, goodIP=False, testpmd=testpmd
+                )
+
+    def test_l4_tx_checksum(self) -> None:
+        """Tests L4 Tx checksum in a variety of scenarios."""
+        packet_list = [
+            Ether() / IP() / UDP(chksum=0xB161),
+            Ether() / IP() / UDP(chksum=0xF),
+            Ether() / IP() / TCP(chksum=0x4904),
+            Ether() / IP() / TCP(chksum=0xF),
+            Ether() / IPv6() / UDP(chksum=0xAF62),
+            Ether() / IPv6() / UDP(chksum=0xF),
+            Ether() / IPv6() / TCP(chksum=0x4705),
+            Ether() / IPv6() / TCP(chksum=0xF),
+            Ether() / IP() / UDP() / VXLAN() / Ether() / IP() / UDP(chksum=0x9949),
+            Ether() / IP() / UDP() / VXLAN() / Ether() / IP() / UDP(chksum=0xF),
+            Ether() / IP() / UDP(chksum=0xF) / VXLAN() / Ether() / IP() / UDP(),
+            Ether() / IP() / UDP(chksum=0xF) / VXLAN() / Ether() / IP() / UDP(chksum=0xF),
+            Ether() / IP() / UDP() / VXLAN() / Ether() / IP() / TCP(chksum=0x30EC),
+            Ether() / IP() / UDP() / VXLAN() / Ether() / IP() / TCP(chksum=0xF),
+            Ether() / IP() / UDP(chksum=0xF) / VXLAN() / Ether() / IP() / TCP(),
+            Ether() / IP() / UDP(chksum=0xF) / VXLAN() / Ether() / IP() / TCP(chksum=0xF),
+            Ether() / IPv6() / UDP() / VXLAN() / Ether() / IPv6() / UDP(chksum=0x9949),
+            Ether() / IPv6() / UDP() / VXLAN() / Ether() / IPv6() / UDP(chksum=0xF),
+            Ether() / IPv6() / UDP(chksum=0xF) / VXLAN() / Ether() / IPv6() / UDP(),
+            Ether() / IPv6() / UDP(chksum=0xF) / VXLAN() / Ether() / IPv6() / UDP(chksum=0xF),
+            Ether() / IPv6() / UDP() / VXLAN() / Ether() / IPv6() / TCP(chksum=0x30EC),
+            Ether() / IPv6() / UDP() / VXLAN() / Ether() / IPv6() / TCP(chksum=0xF),
+            Ether() / IPv6() / UDP(chksum=0xF) / VXLAN() / Ether() / IPv6() / TCP(),
+            Ether() / IPv6() / UDP(chksum=0xF) / VXLAN() / Ether() / IPv6() / TCP(chksum=0xF),
+            Ether() / IP() / GRE() / IP() / UDP(chksum=0x8131),
+            Ether() / IP() / GRE() / IP() / UDP(chksum=0xF),
+            Ether() / IP() / GRE() / IP() / TCP(chksum=0x18D4),
+            Ether() / IP() / GRE() / IP() / TCP(chksum=0xF),
+            Ether() / IPv6() / GRE() / IPv6() / UDP(chksum=0x8131),
+            Ether() / IPv6() / GRE() / IPv6() / UDP(chksum=0xF),
+            Ether() / IPv6() / GRE() / IPv6() / TCP(chksum=0x18D4),
+            Ether() / IPv6() / GRE() / IPv6() / TCP(chksum=0xF),
+        ]
+        """This test case is based on verifying Tx checksum flags in the testpmd verbose
+        output, but these flags seem to vary depending on the type of NIC being used."""
+
+    def test_l3_tx_checksum(self) -> None:
+        """Tests L3 Tx checksum hardware offload."""
+        packet_list = [Ether() / IP(chksum=0x7CCC) / TCP(), Ether() / IP(chksum=0xF) / TCP()]
+        """Another test based on verifying Tx checksum flags in verbose output."""
+
+    def test_vlan_checksum(self) -> None:
+        """Tests VLAN Rx checksum hardware offload and verify packet reception."""
+        packet_list = [
+            Ether() / Dot1Q(vlan=1) / IP(chksum=0x0) / UDP(chksum=0xF) / Raw("xxxxx"),
+            Ether() / Dot1Q(vlan=1) / IP(chksum=0x0) / TCP(chksum=0xF) / Raw("xxxxx"),
+            Ether() / Dot1Q(vlan=1) / IPv6(src="::1") / UDP(chksum=0xF) / Raw("xxxxx"),
+            Ether() / Dot1Q(vlan=1) / IPv6(src="::1") / TCP(chksum=0xF) / Raw("xxxxx"),
+        ]
+        with TestPmdShell(node=self.sut_node, enable_rx_cksum=True) as testpmd:
+            testpmd.set_forward_mode(SimpleForwardingModes.csum)
+            testpmd.set_verbose(level=1)
+            self.setup_hw_offload(testpmd=testpmd)
+            testpmd.start()
+            self.send_packet_and_verify(packet_list=packet_list, load="xxxxx", should_receive=True)
+            for i in range(0, 2):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=False, goodIP=False, testpmd=testpmd
+                )
+            for i in range(2, 4):
+                self.send_packet_and_verify_checksum(
+                    packet=packet_list[i], goodL4=False, goodIP=True, testpmd=testpmd
+                )
-- 
2.44.0


  parent reply	other threads:[~2024-08-12 13:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-12 13:39 [RFC v1 0/2] dts: initial checksum offload suite Dean Marx
2024-08-12 13:39 ` [PATCH v1 1/2] dts: add csum HW offload to testpmd shell Dean Marx
2024-08-12 20:32   ` Nicholas Pratte
2024-08-12 13:39 ` Dean Marx [this message]
2024-08-16 14:20 [PATCH v1 0/2] dts: port over checksum offload suite Dean Marx
2024-08-16 14:20 ` [PATCH v1 2/2] dts: checksum offload test suite Dean Marx
2024-08-19 14:28   ` Alex Chapman
2024-08-19 17:01     ` Dean Marx

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240812133936.26344-3-dmarx@iol.unh.edu \
    --to=dmarx@iol.unh.edu \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=dev@dpdk.org \
    --cc=jspewock@iol.unh.edu \
    --cc=juraj.linkes@pantheon.tech \
    --cc=luca.vizzarro@arm.com \
    --cc=npratte@iol.unh.edu \
    --cc=paul.szczepanek@arm.com \
    --cc=probb@iol.unh.edu \
    --cc=yoan.picchi@foss.arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).