[PATCH v14 1/2] dts: add VLAN methods to testpmd shell

[Dean Marx <dmarx@iol.unh.edu>]

added the following methods to testpmd shell class:
vlan set filter on/off, rx vlan add/rm,
vlan set strip on/off, port stop/start all/port,
tx vlan set/reset, set promisc/verbose

fixed bug in vlan_offload for
show port info, removed $ at end of regex

Signed-off-by: Dean Marx <dmarx@iol.unh.edu>
---
 dts/framework/remote_session/testpmd_shell.py | 245 +++++++++++++++++-
 1 file changed, 244 insertions(+), 1 deletion(-)

diff --git a/dts/framework/remote_session/testpmd_shell.py b/dts/framework/remote_session/testpmd_shell.py
index 43e9f56517..66cc5cb289 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -98,7 +98,7 @@ def make_parser(cls) -> ParserFn:
                 r"strip (?P<STRIP>on|off), "
                 r"filter (?P<FILTER>on|off), "
                 r"extend (?P<EXTEND>on|off), "
-                r"qinq strip (?P<QINQ_STRIP>on|off)$",
+                r"qinq strip (?P<QINQ_STRIP>on|off)",
                 re.MULTILINE,
                 named=True,
             ),
@@ -806,6 +806,249 @@ def show_port_stats(self, port_id: int) -> TestPmdPortStats:
 
         return TestPmdPortStats.parse(output)
 
+    def vlan_filter_set(self, port: int, on: bool, verify: bool = True) -> None:
+        """Set vlan filter on.
+
+        Args:
+            port: The port number to enable VLAN filter on, should be within 0-32.
+            on: Sets filter on if :data:`True`, otherwise turns off.
+            verify: If :data:`True`, the output of the command and show port info
+                is scanned to verify that vlan filtering was enabled successfully.
+                If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the filter
+                fails to update.
+        """
+        filter_cmd_output = self.send_command(f"vlan set filter {'on' if on else 'off'} {port}")
+        if verify:
+            vlan_settings = self.show_port_info(port_id=port).vlan_offload
+            if on ^ (vlan_settings is not None and VLANOffloadFlag.FILTER in vlan_settings):
+                self._logger.debug(f"Failed to set filter on port {port}: \n{filter_cmd_output}")
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to set VLAN filter on port {port}."
+                )
+
+    def rx_vlan(self, vlan: int, port: int, add: bool, verify: bool = True) -> None:
+        """Add specified vlan tag to the filter list on a port.
+
+        Args:
+            vlan: The vlan tag to add, should be within 1-1005, 1-4094 extended.
+            port: The port number to add the tag on, should be within 0-32.
+            add: Adds the tag if :data:`True`, otherwise removes tag.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                the vlan tag was added to the filter list on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the tag
+                is not added.
+        """
+        rx_output = self.send_command(f"rx_vlan {'add' if add else 'rm'} {vlan} {port}")
+        if verify:
+            if (
+                "VLAN-filtering disabled" in rx_output
+                or "Invalid vlan_id" in rx_output
+                or "Bad arguments" in rx_output
+            ):
+                self._logger.debug(
+                    f"Failed to {'add' if add else 'remove'} tag {vlan} port {port}: \n{rx_output}"
+                )
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to {'add' if add else 'remove'} tag {vlan} on port {port}."
+                )
+
+    def vlan_strip_set(self, port: int, on: bool, verify: bool = True) -> None:
+        """Enable vlan stripping on the specified port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            on: If :data:`True`, will turn strip on, otherwise will turn off.
+            verify: If :data:`True`, the output of the command and show port info
+                is scanned to verify that vlan stripping was enabled on the specified port.
+                If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and stripping
+                fails to update.
+        """
+        strip_output = self.send_command(f"vlan set strip {'on' if on else 'off'} {port}")
+        if verify:
+            vlan_settings = self.show_port_info(port_id=port).vlan_offload
+            if on ^ (vlan_settings is not None and VLANOffloadFlag.STRIP in vlan_settings):
+                self._logger.debug(
+                    f"Failed to set strip {'on' if on else 'off'} port {port}: \n{strip_output}"
+                )
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to set strip {'on' if on else 'off'} port {port}."
+                )
+
+    def port_stop_all(self, verify: bool = True) -> None:
+        """Stop all ports.
+
+        Args:
+            verify: If :data:`True`, the output of the command is scanned
+                to ensure all ports are stopped. If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and all ports
+                fail to stop.
+        """
+        port_output = self.send_command("port stop all")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to stop all ports: \n{port_output}")
+                raise InteractiveCommandExecutionError("Testpmd failed to stop all ports.")
+
+    def port_stop(self, port: int, verify: bool = True) -> None:
+        """Stop specified port.
+
+        Args:
+            port: Specifies the port number to use, must be between 0-32.
+            verify: If :data:`True`, the output of the command is scanned
+                to ensure specified port is stopped. If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+                is not stopped.
+        """
+        port_output = self.send_command(f"port stop {port}")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to stop port {port}: \n{port_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to stop port {port}.")
+
+    def port_start_all(self, verify: bool = True) -> None:
+        """Start all ports.
+
+        Args:
+            verify: If :data:`True`, the output of the command is scanned
+                to ensure all ports are started. If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and all ports
+                fail to start.
+        """
+        port_output = self.send_command("port start all")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to start all ports: \n{port_output}")
+                raise InteractiveCommandExecutionError("Testpmd failed to start all ports.")
+
+    def port_start(self, port: int, verify: bool = True) -> None:
+        """Start specified port.
+
+        Args:
+            port: Specifies the port number to use, must be between 0-32.
+            verify: If :data:`True`, the output of the command is scanned
+                to ensure specified port is started. If not, it is considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+                is not started.
+        """
+        port_output = self.send_command(f"port start {port}")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to start port {port}: \n{port_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to start port {port}.")
+
+    def tx_vlan_set(self, port: int, vlan: int, verify: bool = True) -> None:
+        """Set hardware insertion of vlan tags in packets sent on a port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            vlan: The vlan tag to insert, should be within 1-4094.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan insertion was enabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the insertion
+                tag is not set.
+        """
+        vlan_insert_output = self.send_command(f"tx_vlan set {port} {vlan}")
+        if verify:
+            if (
+                "Please stop port" in vlan_insert_output
+                or "Invalid vlan_id" in vlan_insert_output
+                or "Invalid port" in vlan_insert_output
+            ):
+                self._logger.debug(
+                    f"Failed to set vlan tag {vlan} on port {port}:\n{vlan_insert_output}"
+                )
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to set vlan insertion tag {vlan} on port {port}."
+                )
+
+    def tx_vlan_reset(self, port: int, verify: bool = True) -> None:
+        """Disable hardware insertion of vlan tags in packets sent on a port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan insertion was disabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the insertion
+                tag is not reset.
+        """
+        vlan_insert_output = self.send_command(f"tx_vlan reset {port}")
+        if verify:
+            if "Please stop port" in vlan_insert_output or "Invalid port" in vlan_insert_output:
+                self._logger.debug(
+                    f"Failed to reset vlan insertion on port {port}: \n{vlan_insert_output}"
+                )
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to reset vlan insertion on port {port}."
+                )
+
+    def set_promisc(self, port: int, on: bool, verify: bool = True) -> None:
+        """Turns promiscuous mode on/off for the specified port.
+
+        Args:
+            port: Port number to use, should be within 0-32.
+            on: If :data:`True`, turn promisc mode on, otherwise turn off.
+            verify: If :data:`True` an additional command will be sent to verify that promisc mode
+                is properly set. Defaults to :data:`True`.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and promisc mode
+                is not correctly set.
+        """
+        promisc_output = self.send_command(f"set promisc {port} {'on' if on else 'off'}")
+        if verify:
+            stats = self.show_port_info(port_id=port)
+            if on ^ stats.is_promiscuous_mode_enabled:
+                self._logger.debug(f"Failed to set promisc mode on port {port}: \n{promisc_output}")
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to set promisc mode on port {port}."
+                )
+
+    def set_verbose(self, level: int, verify: bool = True) -> None:
+        """Set debug verbosity level.
+
+        Args:
+            level: 0 - silent except for error
+                1 - fully verbose except for Tx packets
+                2 - fully verbose except for Rx packets
+                >2 - fully verbose
+            verify: If :data:`True` the command output will be scanned to verify that verbose level
+                is properly set. Defaults to :data:`True`.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and verbose level
+            is not correctly set.
+        """
+        verbose_output = self.send_command(f"set verbose {level}")
+        if verify:
+            if "Change verbose level" not in verbose_output:
+                self._logger.debug(f"Failed to set verbose level to {level}: \n{verbose_output}")
+                raise InteractiveCommandExecutionError(
+                    f"Testpmd failed to set verbose level to {level}."
+                )
+
     def _close(self) -> None:
         """Overrides :meth:`~.interactive_shell.close`."""
         self.stop()
-- 
2.44.0