From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, maxime.coquelin@redhat.com
Cc: hemant.agrawal@nxp.com, david.marchand@redhat.com,
hernan.vargas@intel.com,
Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [PATCH v2 2/2] baseband/acc: improvement to logging mechanism
Date: Thu, 29 Aug 2024 13:06:24 -0700 [thread overview]
Message-ID: <20240829200624.38551-3-nicolas.chautru@intel.com> (raw)
In-Reply-To: <20240829200624.38551-1-nicolas.chautru@intel.com>
Support the new dev op to dump operations information
related to a given queue and information on previous errors
detected by the driver and tracked internally in PMD.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
drivers/baseband/acc/acc_common.h | 37 +++++++++
drivers/baseband/acc/rte_vrb_pmd.c | 128 +++++++++++++++++++++++------
2 files changed, 138 insertions(+), 27 deletions(-)
diff --git a/drivers/baseband/acc/acc_common.h b/drivers/baseband/acc/acc_common.h
index e249f37e38..c8914b23e0 100644
--- a/drivers/baseband/acc/acc_common.h
+++ b/drivers/baseband/acc/acc_common.h
@@ -149,6 +149,8 @@
#define VRB2_VF_ID_SHIFT 6
#define ACC_MAX_FFT_WIN 16
+#define ACC_MAX_LOGLEN 256
+#define ACC_MAX_BUFFERLEN 256
extern int acc_common_logtype;
@@ -646,8 +648,43 @@ struct __rte_cache_aligned acc_queue {
rte_iova_t fcw_ring_addr_iova;
int8_t *derm_buffer; /* interim buffer for de-rm in SDK */
struct acc_device *d;
+ char error_bufs[ACC_MAX_BUFFERLEN][ACC_MAX_LOGLEN]; /**< Buffer for error log. */
+ uint16_t error_head; /**< Head - Buffer for error log. */
+ uint16_t error_wrap; /**< Wrap Counter - Buffer for error log. */
};
+/**
+ * @brief Report error both through RTE logging and into internal driver memory.
+ *
+ * This function is used to log an error for a specific ACC queue and operation.
+ *
+ * @param q Pointer to the ACC queue.
+ * @param op Pointer to the operation.
+ * @param fmt Format string for the error message.
+ * @param ... Additional arguments for the format string.
+ */
+__rte_format_printf(3, 4)
+static inline void
+acc_error_log(struct acc_queue *q, void *op, const char *fmt, ...)
+{
+ va_list args, args2;
+
+ va_start(args, fmt);
+ va_copy(args2, args);
+ rte_vlog(RTE_LOG_ERR, acc_common_logtype, fmt, args);
+ vsnprintf(q->error_bufs[q->error_head], ACC_MAX_LOGLEN, fmt, args2);
+ q->error_head++;
+ snprintf(q->error_bufs[q->error_head], ACC_MAX_LOGLEN,
+ "%s", rte_bbdev_ops_param_string(op, q->op_type));
+ q->error_head++;
+ if (q->error_head == ACC_MAX_LOGLEN) {
+ q->error_head = 0;
+ q->error_wrap++;
+ }
+ va_end(args);
+ va_end(args2);
+}
+
/* Write to MMIO register address */
static inline void
mmio_write(void *addr, uint32_t value)
diff --git a/drivers/baseband/acc/rte_vrb_pmd.c b/drivers/baseband/acc/rte_vrb_pmd.c
index 585dc49bd6..9d0145d09b 100644
--- a/drivers/baseband/acc/rte_vrb_pmd.c
+++ b/drivers/baseband/acc/rte_vrb_pmd.c
@@ -1022,6 +1022,10 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
q->mmio_reg_enqueue = RTE_PTR_ADD(d->mmio_base,
d->queue_offset(d->pf_device, q->vf_id, q->qgrp_id, q->aq_id));
+ /** initialize the error buffer. */
+ q->error_head = 0;
+ q->error_wrap = 0;
+
rte_bbdev_log_debug(
"Setup dev%u q%u: qgrp_id=%u, vf_id=%u, aq_id=%u, aq_depth=%u, mmio_reg_enqueue=%p base %p\n",
dev->data->dev_id, queue_id, q->qgrp_id, q->vf_id,
@@ -1434,6 +1438,74 @@ vrb_queue_intr_disable(struct rte_bbdev *dev, uint16_t queue_id)
return 0;
}
+
+static int
+vrb_queue_ops_dump(struct rte_bbdev *dev, uint16_t queue_id, FILE *f)
+{
+ struct acc_queue *q = dev->data->queues[queue_id].queue_private;
+ struct rte_bbdev_dec_op *op;
+ uint16_t start_err, end_err, i, int_nb;
+ volatile union acc_info_ring_data *ring_data;
+ uint16_t info_ring_head = q->d->info_ring_head;
+
+ if (f == NULL) {
+ rte_bbdev_log(ERR, "Invalid File input");
+ return -EINVAL;
+ }
+
+ /** Print generic information on queue status. */
+ fprintf(f, "Dump of operations %s on Queue %d by %s\n",
+ rte_bbdev_op_type_str(q->op_type), queue_id, dev->device->driver->name);
+ fprintf(f, " AQ Enqueued %d Dequeued %d Depth %d - Available Enq %d Deq %d\n",
+ q->aq_enqueued, q->aq_dequeued, q->aq_depth,
+ acc_ring_avail_enq(q), acc_ring_avail_deq(q));
+
+ /** Print information captured in the error buffer. */
+ if (q->error_wrap == 0) {
+ start_err = 0;
+ end_err = q->error_head;
+ } else {
+ start_err = q->error_head;
+ end_err = q->error_head + ACC_MAX_BUFFERLEN;
+ }
+ fprintf(f, "Error Buffer - Head %d Wrap %d\n", q->error_head, q->error_wrap);
+ for (i = start_err; i < end_err; ++i)
+ fprintf(f, " %d\t%s", i, q->error_bufs[i % ACC_MAX_BUFFERLEN]);
+
+ /** Print information captured in the info ring. */
+ if (q->d->info_ring != NULL) {
+ fprintf(f, "Info Ring Buffer - Head %d\n", q->d->info_ring_head);
+ ring_data = q->d->info_ring + (q->d->info_ring_head & ACC_INFO_RING_MASK);
+ while (ring_data->valid) {
+ int_nb = int_from_ring(*ring_data, q->d->device_variant);
+ if ((int_nb < ACC_PF_INT_DMA_DL_DESC_IRQ) || (
+ int_nb > ACC_PF_INT_DMA_MLD_DESC_IRQ)) {
+ fprintf(f, " InfoRing: ITR:%d Info:0x%x",
+ int_nb, ring_data->detailed_info);
+ /* Initialize Info Ring entry and move forward. */
+ ring_data->valid = 0;
+ }
+ info_ring_head++;
+ ring_data = q->d->info_ring + (info_ring_head & ACC_INFO_RING_MASK);
+ }
+ }
+
+ fprintf(f, "Ring Content - Head %d Tail %d Depth %d\n",
+ q->sw_ring_head, q->sw_ring_tail, q->sw_ring_depth);
+ /** Print information about each operation in the software ring. */
+ for (i = 0; i < q->sw_ring_depth; ++i) {
+ op = (q->ring_addr + i)->req.op_addr;
+ if (op != NULL)
+ fprintf(f, " %d\tn %d %s",
+ i, (q->ring_addr + i)->req.numCBs,
+ rte_bbdev_ops_param_string(op, q->op_type));
+ }
+
+ fprintf(f, "== End of File ==\n");
+
+ return 0;
+}
+
static const struct rte_bbdev_ops vrb_bbdev_ops = {
.setup_queues = vrb_setup_queues,
.intr_enable = vrb_intr_enable,
@@ -1443,7 +1515,8 @@ static const struct rte_bbdev_ops vrb_bbdev_ops = {
.queue_release = vrb_queue_release,
.queue_stop = vrb_queue_stop,
.queue_intr_enable = vrb_queue_intr_enable,
- .queue_intr_disable = vrb_queue_intr_disable
+ .queue_intr_disable = vrb_queue_intr_disable,
+ .queue_ops_dump = vrb_queue_ops_dump
};
/* PCI PF address map. */
@@ -1680,7 +1753,7 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
uint32_t *in_offset, uint32_t *h_out_offset,
uint32_t *s_out_offset, uint32_t *h_out_length,
uint32_t *s_out_length, uint32_t *mbuf_total_left,
- uint32_t *seg_total_left, uint8_t r)
+ uint32_t *seg_total_left, uint8_t r, struct acc_queue *q)
{
int next_triplet = 1; /* FCW already done. */
uint16_t k;
@@ -1724,8 +1797,8 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
kw = RTE_ALIGN_CEIL(k + 4, 32) * 3;
if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < kw))) {
- rte_bbdev_log(ERR,
- "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+ acc_error_log(q, (void *)op,
+ "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u\n",
*mbuf_total_left, kw);
return -1;
}
@@ -1735,8 +1808,8 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
check_bit(op->turbo_dec.op_flags,
RTE_BBDEV_TURBO_DEC_SCATTER_GATHER));
if (unlikely(next_triplet < 0)) {
- rte_bbdev_log(ERR,
- "Mismatch between data to process and mbuf data length in bbdev_op: %p",
+ acc_error_log(q, (void *)op,
+ "Mismatch between data to process and mbuf data length in bbdev_op: %p\n",
op);
return -1;
}
@@ -1748,7 +1821,7 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
desc, h_output, *h_out_offset,
*h_out_length, next_triplet, ACC_DMA_BLKID_OUT_HARD);
if (unlikely(next_triplet < 0)) {
- rte_bbdev_log(ERR,
+ acc_error_log(q, (void *)op,
"Mismatch between data to process and mbuf data length in bbdev_op: %p",
op);
return -1;
@@ -1760,7 +1833,7 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
/* Soft output. */
if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
if (op->turbo_dec.soft_output.data == 0) {
- rte_bbdev_log(ERR, "Soft output is not defined");
+ acc_error_log(q, (void *)op, "Soft output is not defined\n");
return -1;
}
if (check_bit(op->turbo_dec.op_flags,
@@ -1773,8 +1846,8 @@ vrb_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
*s_out_offset, *s_out_length, next_triplet,
ACC_DMA_BLKID_OUT_SOFT);
if (unlikely(next_triplet < 0)) {
- rte_bbdev_log(ERR,
- "Mismatch between data to process and mbuf data length in bbdev_op: %p",
+ acc_error_log(q, (void *)op,
+ "Mismatch between data to process and mbuf data length in bbdev_op: %p\n",
op);
return -1;
}
@@ -1797,7 +1870,8 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
struct rte_mbuf **input, struct rte_mbuf *h_output,
uint32_t *in_offset, uint32_t *h_out_offset,
uint32_t *h_out_length, uint32_t *mbuf_total_left,
- uint32_t *seg_total_left, struct acc_fcw_ld *fcw, uint16_t device_variant)
+ uint32_t *seg_total_left, struct acc_fcw_ld *fcw, uint16_t device_variant,
+ struct acc_queue *q)
{
struct rte_bbdev_op_ldpc_dec *dec = &op->ldpc_dec;
int next_triplet = 1; /* FCW already done. */
@@ -1808,8 +1882,8 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
if (device_variant == VRB1_VARIANT) {
if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_HARQ_4BIT_COMPRESSION) ||
check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_SOFT_OUT_ENABLE)) {
- rte_bbdev_log(ERR,
- "VRB1 does not support the requested capabilities %x",
+ acc_error_log(q, (void *)op,
+ "VRB1 does not support the requested capabilities %x\n",
op->ldpc_dec.op_flags);
return -1;
}
@@ -1829,8 +1903,8 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
output_length = K - dec->n_filler - crc24_overlap;
if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < input_length))) {
- rte_bbdev_log(ERR,
- "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+ acc_error_log(q, (void *)op,
+ "Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u\n",
*mbuf_total_left, input_length);
return -1;
}
@@ -1842,15 +1916,15 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
RTE_BBDEV_LDPC_DEC_SCATTER_GATHER));
if (unlikely(next_triplet < 0)) {
- rte_bbdev_log(ERR,
- "Mismatch between data to process and mbuf data length in bbdev_op: %p",
+ acc_error_log(q, (void *)op,
+ "Mismatch between data to process and mbuf data length in bbdev_op: %p\n",
op);
return -1;
}
if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE)) {
if (op->ldpc_dec.harq_combined_input.data == 0) {
- rte_bbdev_log(ERR, "HARQ input is not defined");
+ acc_error_log(q, (void *)op, "HARQ input is not defined\n");
return -1;
}
h_p_size = fcw->hcin_size0 + fcw->hcin_size1;
@@ -1859,7 +1933,7 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
else if (fcw->hcin_decomp_mode == 4)
h_p_size = h_p_size / 2;
if (op->ldpc_dec.harq_combined_input.data == 0) {
- rte_bbdev_log(ERR, "HARQ input is not defined");
+ acc_error_log(q, (void *)op, "HARQ input is not defined\n");
return -1;
}
acc_dma_fill_blk_type(
@@ -1882,7 +1956,7 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
if (check_bit(op->ldpc_dec.op_flags, RTE_BBDEV_LDPC_SOFT_OUT_ENABLE)) {
if (op->ldpc_dec.soft_output.data == 0) {
- rte_bbdev_log(ERR, "Soft output is not defined");
+ acc_error_log(q, (void *)op, "Soft output is not defined\n");
return -1;
}
dec->soft_output.length = fcw->rm_e;
@@ -1894,7 +1968,7 @@ vrb_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
if (check_bit(op->ldpc_dec.op_flags,
RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE)) {
if (op->ldpc_dec.harq_combined_output.data == 0) {
- rte_bbdev_log(ERR, "HARQ output is not defined");
+ acc_error_log(q, (void *)op, "HARQ output is not defined\n");
return -1;
}
@@ -2326,8 +2400,8 @@ vrb2_enqueue_ldpc_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op
in_length_in_bytes, &seg_total_left, next_triplet,
check_bit(enc->op_flags, RTE_BBDEV_LDPC_ENC_SCATTER_GATHER));
if (unlikely(next_triplet < 0)) {
- rte_bbdev_log(ERR,
- "Mismatch between data to process and mbuf data length in bbdev_op: %p",
+ acc_error_log(q, (void *)op,
+ "Mismatch between data to process and mbuf data length in bbdev_op: %p\n",
op);
return -1;
}
@@ -2399,7 +2473,7 @@ enqueue_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
ret = vrb_dma_desc_td_fill(op, &desc->req, &input, h_output,
s_output, &in_offset, &h_out_offset, &s_out_offset,
&h_out_length, &s_out_length, &mbuf_total_left,
- &seg_total_left, 0);
+ &seg_total_left, 0, q);
if (unlikely(ret < 0))
return ret;
@@ -2478,7 +2552,7 @@ vrb_enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
ret = vrb_dma_desc_ld_fill(op, &desc->req, &input, h_output,
&in_offset, &h_out_offset,
&h_out_length, &mbuf_total_left,
- &seg_total_left, fcw, q->d->device_variant);
+ &seg_total_left, fcw, q->d->device_variant, q);
if (unlikely(ret < 0))
return ret;
}
@@ -2572,7 +2646,7 @@ vrb_enqueue_ldpc_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
h_output, &in_offset, &h_out_offset,
&h_out_length,
&mbuf_total_left, &seg_total_left,
- &desc->req.fcw_ld, q->d->device_variant);
+ &desc->req.fcw_ld, q->d->device_variant, q);
if (unlikely(ret < 0))
return ret;
@@ -2658,7 +2732,7 @@ enqueue_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
ret = vrb_dma_desc_td_fill(op, &desc->req, &input,
h_output, s_output, &in_offset, &h_out_offset,
&s_out_offset, &h_out_length, &s_out_length,
- &mbuf_total_left, &seg_total_left, r);
+ &mbuf_total_left, &seg_total_left, r, q);
if (unlikely(ret < 0))
return ret;
--
2.34.1
next prev parent reply other threads:[~2024-08-29 20:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-29 20:06 [PATCH v2 0/2] bbdev: dump debug information Nicolas Chautru
2024-08-29 20:06 ` [PATCH v2 1/2] bbdev: add new function to " Nicolas Chautru
2024-09-13 14:10 ` Maxime Coquelin
2024-09-13 23:18 ` Chautru, Nicolas
2024-08-29 20:06 ` Nicolas Chautru [this message]
2024-09-13 14:18 ` [PATCH v2 2/2] baseband/acc: improvement to logging mechanism Maxime Coquelin
2024-09-13 19:00 ` Chautru, Nicolas
2024-09-16 7:57 ` Maxime Coquelin
2024-09-16 16:17 ` Chautru, Nicolas
2024-09-16 18:58 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240829200624.38551-3-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=hernan.vargas@intel.com \
--cc=maxime.coquelin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).