From: Chaoyong He <chaoyong.he@corigine.com>
To: dev@dpdk.org
Cc: oss-drivers@corigine.com, Long Wu <long.wu@corigine.com>,
Chaoyong He <chaoyong.he@corigine.com>
Subject: [PATCH 2/2] net/nfp: flow rule supports match Ethernet type
Date: Fri, 30 Aug 2024 15:13:23 +0800 [thread overview]
Message-ID: <20240830071323.2581557-3-chaoyong.he@corigine.com> (raw)
In-Reply-To: <20240830071323.2581557-1-chaoyong.he@corigine.com>
From: Long Wu <long.wu@corigine.com>
Add the support of match ethernet type item when
using flower firmware, with a limit that it can
only be used alone.
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
---
drivers/net/nfp/flower/nfp_flower_cmsg.h | 14 ++++++++++
drivers/net/nfp/flower/nfp_flower_flow.c | 34 ++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/net/nfp/flower/nfp_flower_cmsg.h b/drivers/net/nfp/flower/nfp_flower_cmsg.h
index 5d23227c24..5fc4210d8b 100644
--- a/drivers/net/nfp/flower/nfp_flower_cmsg.h
+++ b/drivers/net/nfp/flower/nfp_flower_cmsg.h
@@ -708,6 +708,20 @@ struct nfp_flower_ipv6_gre_tun {
rte_be32_t reserved2;
};
+/*
+ * L3 other (1W/4B)
+ * 3 2 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | reserved | ethertype |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * Note: This is only used when no specific L3 header available.
+ */
+struct nfp_flower_l3_other {
+ rte_be16_t reserved;
+ rte_be16_t ethertype;
+};
+
struct nfp_fl_act_head {
uint8_t jump_id;
uint8_t len_lw;
diff --git a/drivers/net/nfp/flower/nfp_flower_flow.c b/drivers/net/nfp/flower/nfp_flower_flow.c
index f24e9cee9c..20c8b4a1b1 100644
--- a/drivers/net/nfp/flower/nfp_flower_flow.c
+++ b/drivers/net/nfp/flower/nfp_flower_flow.c
@@ -26,6 +26,7 @@
#define NFP_FLOWER_LAYER_VXLAN RTE_BIT32(7)
#define NFP_FLOWER_LAYER2_GRE RTE_BIT32(0)
+#define NFP_FLOWER_LAYER2_L3_OTHER RTE_BIT32(3)
#define NFP_FLOWER_LAYER2_QINQ RTE_BIT32(4)
#define NFP_FLOWER_LAYER2_GENEVE RTE_BIT32(5)
#define NFP_FLOWER_LAYER2_GENEVE_OP RTE_BIT32(6)
@@ -962,10 +963,15 @@ struct nfp_item_flag {
bool outer_ip6_flag;
};
+struct nfp_item_shared_flag {
+ bool l3_other_flag;
+};
+
struct nfp_item_calculate_param {
const struct rte_flow_item *item;
struct nfp_fl_key_ls *key_ls;
struct nfp_item_flag *flag;
+ struct nfp_item_shared_flag shared_flag;
};
typedef int (*nfp_flow_key_check_item_fn)(struct nfp_item_calculate_param *param);
@@ -1065,6 +1071,9 @@ nfp_flow_key_layers_check_items(const struct rte_flow_item items[],
PMD_DRV_LOG(ERR, "Flow item %d check fail", item->type);
return ret;
}
+
+ if (item->type != RTE_FLOW_ITEM_TYPE_ETH)
+ param->shared_flag.l3_other_flag = true;
}
return 0;
@@ -1089,6 +1098,13 @@ nfp_flow_item_calculate_eth(struct nfp_item_calculate_param *param)
key_ls->key_layer |= NFP_FLOWER_LAYER_MAC;
key_ls->key_size += sizeof(struct nfp_flower_mac_mpls);
+
+ if (!param->shared_flag.l3_other_flag && spec->type != 0) {
+ key_ls->key_layer |= NFP_FLOWER_LAYER_EXT_META;
+ key_ls->key_size += sizeof(struct nfp_flower_ext_meta);
+ key_ls->key_layer_two |= NFP_FLOWER_LAYER2_L3_OTHER;
+ key_ls->key_size += sizeof(struct nfp_flower_l3_other);
+ }
}
static void
@@ -1870,6 +1886,9 @@ nfp_flow_merge_eth(struct nfp_flow_merge_param *param)
const struct rte_flow_item *item;
const struct rte_flow_item_eth *spec;
const struct rte_flow_item_eth *mask;
+ struct nfp_flower_l3_other *l3_other;
+ struct nfp_flower_meta_tci *meta_tci;
+ struct nfp_flower_ext_meta *ext_meta = NULL;
item = param->item;
spec = item->spec;
@@ -1892,6 +1911,21 @@ nfp_flow_merge_eth(struct nfp_flow_merge_param *param)
eth->mpls_lse = 0;
*param->mbuf_off += sizeof(struct nfp_flower_mac_mpls);
+ meta_tci = (struct nfp_flower_meta_tci *)param->nfp_flow->payload.unmasked_data;
+ if ((meta_tci->nfp_flow_key_layer & NFP_FLOWER_LAYER_EXT_META) != 0)
+ ext_meta = (struct nfp_flower_ext_meta *)(meta_tci + 1);
+
+ if (ext_meta != NULL &&
+ (ext_meta->nfp_flow_key_layer2 & NFP_FLOWER_LAYER2_L3_OTHER) != 0) {
+ l3_other = (void *)(*param->mbuf_off);
+ if (param->is_mask)
+ l3_other->ethertype = mask->type;
+ else
+ l3_other->ethertype = spec->type;
+
+ *param->mbuf_off += sizeof(struct nfp_flower_l3_other);
+ }
+
eth_end:
return 0;
}
--
2.39.1
next prev parent reply other threads:[~2024-08-30 7:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-30 7:13 [PATCH 0/2] Support match flow rule Ethernet type field Chaoyong He
2024-08-30 7:13 ` [PATCH 1/2] net/nfp: refactor flow item calculate function arguments Chaoyong He
2024-08-30 7:13 ` Chaoyong He [this message]
2024-08-30 11:28 ` [PATCH v3 0/2] Support match flow rule Ethernet type field Chaoyong He
2024-08-30 11:28 ` [PATCH v3 1/2] net/nfp: refactor flow item calculate function arguments Chaoyong He
2024-08-30 11:28 ` [PATCH v3 2/2] net/nfp: flow rule supports match Ethernet type Chaoyong He
2024-09-02 16:48 ` [PATCH v3 0/2] Support match flow rule Ethernet type field Ferruh Yigit
-- strict thread matches above, loose matches on Subject: below --
2024-08-30 3:10 [PATCH " Chaoyong He
2024-08-30 3:10 ` [PATCH 2/2] net/nfp: flow rule supports match Ethernet type Chaoyong He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240830071323.2581557-3-chaoyong.he@corigine.com \
--to=chaoyong.he@corigine.com \
--cc=dev@dpdk.org \
--cc=long.wu@corigine.com \
--cc=oss-drivers@corigine.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).