From: jspewock@iol.unh.edu
To: wathsala.vithanage@arm.com, probb@iol.unh.edu,
Luca.Vizzarro@arm.com, alex.chapman@arm.com,
juraj.linkes@pantheon.tech, thomas@monjalon.net,
paul.szczepanek@arm.com, yoan.picchi@foss.arm.com,
npratte@iol.unh.edu, Honnappa.Nagarahalli@arm.com
Cc: dev@dpdk.org, Jeremy Spewock <jspewock@iol.unh.edu>
Subject: [PATCH v4 1/2] dts: add port queue modification and forwarding stats to testpmd
Date: Wed, 4 Sep 2024 11:49:50 -0400 [thread overview]
Message-ID: <20240904154951.13524-2-jspewock@iol.unh.edu> (raw)
In-Reply-To: <20240904154951.13524-1-jspewock@iol.unh.edu>
From: Jeremy Spewock <jspewock@iol.unh.edu>
This patch adds methods for querying and modifying port queue state and
configuration. In addition to this, it also adds the ability to capture
the forwarding statistics that get outputted when you send the "stop"
command in testpmd. Querying of port queue information is handled
through a TextParser dataclass in case there is future need for using
more of the output from the command used to query the information.
Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu>
---
dts/framework/remote_session/testpmd_shell.py | 233 +++++++++++++++++-
1 file changed, 231 insertions(+), 2 deletions(-)
diff --git a/dts/framework/remote_session/testpmd_shell.py b/dts/framework/remote_session/testpmd_shell.py
index 43e9f56517..b545040638 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -19,7 +19,7 @@
from dataclasses import dataclass, field
from enum import Flag, auto
from pathlib import PurePath
-from typing import ClassVar
+from typing import ClassVar, cast
from typing_extensions import Self, Unpack
@@ -541,6 +541,56 @@ class TestPmdPort(TextParser):
)
+@dataclass
+class TestPmdPortQueue(TextParser):
+ """Dataclass representation of the common parts of the testpmd `show rxq/txq info` commands."""
+
+ #:
+ prefetch_threshold: int = field(metadata=TextParser.find_int(r"prefetch threshold: (\d+)"))
+ #:
+ host_threshold: int = field(metadata=TextParser.find_int(r"host threshold: (\d+)"))
+ #:
+ writeback_threshold: int = field(metadata=TextParser.find_int(r"writeback threshold: (\d+)"))
+ #:
+ free_threshold: int = field(metadata=TextParser.find_int(r"free threshold: (\d+)"))
+ #:
+ deferred_start: bool = field(metadata=TextParser.find("deferred start: on"))
+ #: The number of RXD/TXDs is just the ring size of the queue.
+ ring_size: int = field(metadata=TextParser.find_int(r"Number of (?:RXDs|TXDs): (\d+)"))
+ #:
+ is_queue_started: bool = field(metadata=TextParser.find("queue state: started"))
+ #:
+ burst_mode: str | None = field(
+ default=None, metadata=TextParser.find(r"Burst mode: ([^\r\n]+)")
+ )
+
+
+@dataclass
+class TestPmdTxPortQueue(TestPmdPortQueue):
+ """Dataclass representation for testpmd `show txq info` command."""
+
+ #:
+ rs_threshold: int | None = field(
+ default=None, metadata=TextParser.find_int(r"RS threshold: (\d+)")
+ )
+
+
+@dataclass
+class TestPmdRxPortQueue(TestPmdPortQueue):
+ """Dataclass representation for testpmd `show rxq info` command."""
+
+ #:
+ mempool: str | None = field(default=None, metadata=TextParser.find(r"Mempool: ([^\r\n]+)"))
+ #:
+ can_drop_packets: bool | None = field(
+ default=None, metadata=TextParser.find(r"drop packets: on")
+ )
+ #:
+ is_scattering_packets: bool | None = field(
+ default=None, metadata=TextParser.find(r"scattered packets: on")
+ )
+
+
@dataclass
class TestPmdPortStats(TextParser):
"""Port statistics."""
@@ -645,7 +695,7 @@ def start(self, verify: bool = True) -> None:
"Not all ports came up after starting packet forwarding in testpmd."
)
- def stop(self, verify: bool = True) -> None:
+ def stop(self, verify: bool = True) -> str:
"""Stop packet forwarding.
Args:
@@ -653,6 +703,9 @@ def stop(self, verify: bool = True) -> None:
forwarding was stopped successfully or not started. If neither is found, it is
considered an error.
+ Returns:
+ Output gathered from sending the stop command.
+
Raises:
InteractiveCommandExecutionError: If `verify` is :data:`True` and the command to stop
forwarding results in an error.
@@ -665,6 +718,7 @@ def stop(self, verify: bool = True) -> None:
):
self._logger.debug(f"Failed to stop packet forwarding: \n{stop_cmd_output}")
raise InteractiveCommandExecutionError("Testpmd failed to stop packet forwarding.")
+ return stop_cmd_output
def get_devices(self) -> list[TestPmdDevice]:
"""Get a list of device names that are known to testpmd.
@@ -806,6 +860,181 @@ def show_port_stats(self, port_id: int) -> TestPmdPortStats:
return TestPmdPortStats.parse(output)
+ def show_port_queue_info(
+ self, port_id: int, queue_id: int, is_rx_queue: bool
+ ) -> TestPmdPortQueue:
+ """Get the info for a queue on a given port.
+
+ Args:
+ port_id: ID of the port where the queue resides.
+ queue_id: ID of the queue to query.
+ is_rx_queue: Whether to check an RX or TX queue. If :data:`True` an RX queue will be
+ queried, otherwise a TX queue will be queried.
+
+ Raises:
+ InteractiveCommandExecutionError: If there is a failure when getting the info for the
+ queue.
+
+ Returns:
+ Information about the queue on the given port.
+ """
+ queue_type = "rxq" if is_rx_queue else "txq"
+ queue_info = self.send_command(
+ f"show {queue_type} info {port_id} {queue_id}", skip_first_line=True
+ )
+ if queue_info.startswith("ETHDEV: Invalid"):
+ raise InteractiveCommandExecutionError(
+ f"Could not get the info for {queue_type} {queue_id} on port {port_id}"
+ )
+ return (
+ TestPmdRxPortQueue.parse(queue_info)
+ if is_rx_queue
+ else TestPmdTxPortQueue.parse(queue_info)
+ )
+
+ def show_port_rx_queue_info(self, port_id: int, queue_id: int) -> TestPmdRxPortQueue:
+ """Get port queue info and cast to :class:`TestPmdRxPortQueue`.
+
+ Wrapper around :meth:`show_port_queue_info` that casts the more generic type into the
+ correct subclass.
+
+ Args:
+ port_id: ID of the port where the queue resides.
+ queue_id: ID of the queue to query.
+
+ Returns:
+ Information about the Rx queue on the given port.
+ """
+ return cast(TestPmdRxPortQueue, self.show_port_queue_info(port_id, queue_id, True))
+
+ def show_port_tx_queue_info(self, port_id: int, queue_id: int) -> TestPmdTxPortQueue:
+ """Get port queue info and cast to :class:`TestPmdTxPortQueue`.
+
+ Wrapper around :meth:`show_port_queue_info` that casts the more generic type into the
+ correct subclass.
+
+ Args:
+ port_id: ID of the port where the queue resides.
+ queue_id: ID of the queue to query.
+
+ Returns:
+ Information about the Tx queue on the given port.
+ """
+ return cast(TestPmdTxPortQueue, self.show_port_queue_info(port_id, queue_id, False))
+
+ def stop_port_queue(
+ self, port_id: int, queue_id: int, is_rx_queue: bool, verify: bool = True
+ ) -> None:
+ """Stops a given queue on a port.
+
+ Args:
+ port_id: ID of the port that the queue belongs to.
+ queue_id: ID of the queue to stop.
+ is_rx_queue: Type of queue to stop. If :data:`True` an RX queue will be stopped,
+ otherwise a TX queue will be stopped.
+ verify: If :data:`True` an additional command will be sent to verify the queue stopped.
+ Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and the queue fails to
+ stop.
+ """
+ port_type = "rxq" if is_rx_queue else "txq"
+ stop_cmd_output = self.send_command(f"port {port_id} {port_type} {queue_id} stop")
+ if verify:
+ if self.show_port_queue_info(port_id, queue_id, is_rx_queue).is_queue_started:
+ self._logger.debug(
+ f"Failed to stop {port_type} {queue_id} on port {port_id}:\n{stop_cmd_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Test pmd failed to stop {port_type} {queue_id} on port {port_id}"
+ )
+
+ def start_port_queue(
+ self, port_id: int, queue_id: int, is_rx_queue: bool, verify: bool = True
+ ) -> None:
+ """Starts a given queue on a port.
+
+ First sets up the port queue, then starts it.
+
+ Args:
+ port_id: ID of the port that the queue belongs to.
+ queue_id: ID of the queue to start.
+ is_rx_queue: Type of queue to start. If :data:`True` an RX queue will be started,
+ otherwise a TX queue will be started.
+ verify: if :data:`True` an additional command will be sent to verify that the queue was
+ started. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and the queue fails to
+ start.
+ """
+ port_type = "rxq" if is_rx_queue else "txq"
+ self.setup_port_queue(port_id, queue_id, is_rx_queue)
+ start_cmd_output = self.send_command(f"port {port_id} {port_type} {queue_id} start")
+ if verify:
+ if not self.show_port_queue_info(port_id, queue_id, is_rx_queue).is_queue_started:
+ self._logger.debug(
+ f"Failed to start {port_type} {queue_id} on port {port_id}:\n{start_cmd_output}"
+ )
+ raise InteractiveCommandExecutionError(
+ f"Test pmd failed to start {port_type} {queue_id} on port {port_id}"
+ )
+
+ def setup_port_queue(self, port_id: int, queue_id: int, is_rx_queue: bool) -> None:
+ """Setup a given queue on a port.
+
+ This functionality cannot be verified because the setup action only takes effect when the
+ queue is started.
+
+ Args:
+ port_id: ID of the port where the queue resides.
+ queue_id: ID of the queue to setup.
+ is_rx_queue: Type of queue to setup. If :data:`True` an RX queue will be setup,
+ otherwise a TX queue will be setup.
+ """
+ self.send_command(f"port {port_id} {'rxq' if is_rx_queue else 'txq'} {queue_id} setup")
+
+ def set_queue_ring_size(
+ self,
+ port_id: int,
+ queue_id: int,
+ size: int,
+ is_rx_queue: bool,
+ verify: bool = True,
+ ) -> None:
+ """Update the ring size of an Rx/Tx queue on a given port.
+
+ Queue is setup after setting the ring size so that the queue info reflects this change and
+ it can be verified.
+
+ Args:
+ port_id: The port that the queue resides on.
+ queue_id: The ID of the queue on the port.
+ size: The size to update the ring size to.
+ is_rx_queue: Whether to modify an RX or TX queue. If :data:`True` an RX queue will be
+ updated, otherwise a TX queue will be updated.
+ verify: If :data:`True` an additional command will be sent to check the ring size of
+ the queue in an attempt to validate that the size was changes properly.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and there is a failure
+ when updating ring size.
+ """
+ queue_type = "rxq" if is_rx_queue else "txq"
+ self.send_command(f"port config {port_id} {queue_type} {queue_id} ring_size {size}")
+ self.setup_port_queue(port_id, queue_id, is_rx_queue)
+ if verify:
+ curr_ring_size = self.show_port_queue_info(port_id, queue_id, is_rx_queue).ring_size
+ if curr_ring_size != size:
+ self._logger.debug(
+ f"Failed up update ring size of queue {queue_id} on port {port_id}. Current"
+ f" ring size is {curr_ring_size}."
+ )
+ raise InteractiveCommandExecutionError(
+ f"Failed to update ring size of queue {queue_id} on port {port_id}"
+ )
+
def _close(self) -> None:
"""Overrides :meth:`~.interactive_shell.close`."""
self.stop()
--
2.46.0
next prev parent reply other threads:[~2024-09-04 15:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-25 15:53 [PATCH v1 0/4] dts: add dynamic queue configuration test suite jspewock
2024-06-25 15:53 ` [PATCH v1 1/4] dts: add send_packets to test suites and rework packet addressing jspewock
2024-06-25 15:53 ` [PATCH v1 2/4] dts: add port queue modification and forwarding stats to testpmd jspewock
2024-06-25 15:53 ` [PATCH v1 3/4] dts: add dynamic queue test suite jspewock
2024-06-25 15:53 ` [PATCH v1 4/4] dts: add dynamic queue conf to the yaml schema jspewock
2024-07-03 21:58 ` [PATCH v2 0/4] dts: add dynamic queue configuration test suite jspewock
2024-07-03 21:58 ` [PATCH v2 1/4] dts: add send_packets to test suites and rework packet addressing jspewock
2024-07-03 21:58 ` [PATCH v2 2/4] dts: add port queue modification and forwarding stats to testpmd jspewock
2024-07-03 21:58 ` [PATCH v2 3/4] dts: add dynamic queue test suite jspewock
2024-07-03 21:58 ` [PATCH v2 4/4] dts: add dynamic queue conf to the yaml schema jspewock
2024-07-24 15:07 ` [PATCH v3 0/4] dts: add dynamic queue configuration test suite jspewock
2024-07-24 15:07 ` [PATCH v3 1/4] dts: add send_packets to test suites and rework packet addressing jspewock
2024-07-26 14:37 ` Nicholas Pratte
2024-07-26 19:00 ` Nicholas Pratte
2024-07-26 19:13 ` Jeremy Spewock
2024-08-29 19:42 ` Nicholas Pratte
2024-07-24 15:07 ` [PATCH v3 2/4] dts: add port queue modification and forwarding stats to testpmd jspewock
2024-07-24 15:07 ` [PATCH v3 3/4] dts: add dynamic queue test suite jspewock
2024-07-24 15:07 ` [PATCH v3 4/4] dts: add dynamic queue conf to the yaml schema jspewock
2024-09-04 15:49 ` [PATCH v4 0/2] dts: add dynamic queue configuration test suite jspewock
2024-09-04 15:49 ` jspewock [this message]
2024-09-04 15:49 ` [PATCH v4 2/2] dts: add dynamic queue " jspewock
2024-09-25 19:20 ` [PATCH v5 0/2] dts: add dynamic queue configuration " jspewock
2024-09-25 19:20 ` [PATCH v5 1/2] dts: add port queue modification and forwarding stats to testpmd jspewock
2024-09-25 19:20 ` [PATCH v5 2/2] dts: add dynamic queue test suite jspewock
2024-11-05 16:58 ` [PATCH v6 0/2] dts: add dynamic queue configuration " Dean Marx
2024-11-05 16:58 ` [PATCH v6 1/2] dts: add port queue modification and forwarding stats to testpmd Dean Marx
2024-11-18 23:25 ` Patrick Robb
2024-11-18 23:36 ` Patrick Robb
2024-11-05 16:58 ` [PATCH v6 2/2] dts: add dynamic queue test suite Dean Marx
2024-11-18 23:24 ` Patrick Robb
2024-11-18 23:24 ` Patrick Robb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240904154951.13524-2-jspewock@iol.unh.edu \
--to=jspewock@iol.unh.edu \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=Luca.Vizzarro@arm.com \
--cc=alex.chapman@arm.com \
--cc=dev@dpdk.org \
--cc=juraj.linkes@pantheon.tech \
--cc=npratte@iol.unh.edu \
--cc=paul.szczepanek@arm.com \
--cc=probb@iol.unh.edu \
--cc=thomas@monjalon.net \
--cc=wathsala.vithanage@arm.com \
--cc=yoan.picchi@foss.arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).