* [PATCH 0/3] add frequency adjustment support for PTP
@ 2024-09-05 10:08 Mingjin Ye
2024-09-05 10:08 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
` (3 more replies)
0 siblings, 4 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 10:08 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye
[1/3] ethdev: add frequency adjustment API
[2/3] net/ice: add frequency adjustment support for PTP
[3/3] examples/ptpclient: add frequency adjustment support
Mingjin Ye (3):
ethdev: add frequency adjustment API
net/ice: add frequency adjustment support for PTP
examples/ptpclient: add frequency adjustment support
doc/guides/nics/features.rst | 4 +-
doc/guides/nics/ice.rst | 15 ++
doc/guides/rel_notes/release_24_11.rst | 30 +--
drivers/net/ice/ice_ethdev.c | 177 +++++++++++----
drivers/net/ice/ice_ethdev.h | 2 +
drivers/net/ice/ice_rxtx.c | 4 +-
examples/ptpclient/ptpclient.c | 300 ++++++++++++++++++++++---
lib/ethdev/ethdev_driver.h | 5 +
lib/ethdev/ethdev_trace.h | 9 +
lib/ethdev/ethdev_trace_points.c | 3 +
lib/ethdev/rte_ethdev.c | 18 ++
lib/ethdev/rte_ethdev.h | 20 ++
lib/ethdev/version.map | 3 +
13 files changed, 482 insertions(+), 108 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] ethdev: add frequency adjustment API
2024-09-05 10:08 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
@ 2024-09-05 10:08 ` Mingjin Ye
2024-09-05 10:08 ` [PATCH 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
` (2 subsequent siblings)
3 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 10:08 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su, Thomas Monjalon, Ferruh Yigit, Andrew Rybchenko
This patch adds freq adjustment API for PTP high accuracy.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
doc/guides/nics/features.rst | 4 +++-
doc/guides/rel_notes/release_24_11.rst | 30 +++-----------------------
lib/ethdev/ethdev_driver.h | 5 +++++
lib/ethdev/ethdev_trace.h | 9 ++++++++
lib/ethdev/ethdev_trace_points.c | 3 +++
lib/ethdev/rte_ethdev.c | 18 ++++++++++++++++
lib/ethdev/rte_ethdev.h | 20 +++++++++++++++++
lib/ethdev/version.map | 3 +++
8 files changed, 64 insertions(+), 28 deletions(-)
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index cd0115ffb3..0508f118fe 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -677,10 +677,12 @@ Supports IEEE1588/802.1AS timestamping.
* **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
- ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
+ ``timesync_adjust_time``, ``timesync_adjust_freq``,
+ ``timesync_read_time``, ``timesync_write_time``.
* **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
``rte_eth_timesync_read_rx_timestamp()``,
``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
+ ``rte_eth_timesync_adjust_freq()``,
``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
diff --git a/doc/guides/rel_notes/release_24_11.rst b/doc/guides/rel_notes/release_24_11.rst
index 0ff70d9057..10ac35e5c0 100644
--- a/doc/guides/rel_notes/release_24_11.rst
+++ b/doc/guides/rel_notes/release_24_11.rst
@@ -25,35 +25,11 @@ New Features
------------
.. This section should contain new features added in this release.
- Sample format:
- * **Add a title in the past tense with a full stop.**
+* **Added Ethernet device clock incremental rate adjustment.**
- Add a short 1-2 sentence description in the past tense.
- The description should be enough to allow someone scanning
- the release notes to understand the new feature.
-
- If the feature adds a lot of sub-features you can use a bullet list
- like this:
-
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
-
- Refer to the previous release notes for examples.
-
- Suggested order in release notes items:
- * Core libs (EAL, mempool, ring, mbuf, buses)
- * Device abstraction libs and PMDs (ordered alphabetically by vendor name)
- - ethdev (lib, PMDs)
- - cryptodev (lib, PMDs)
- - eventdev (lib, PMDs)
- - etc
- * Other libs
- * Apps, Examples, Tools (if significant)
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+ Added new function ``rte_eth_timesync_adjust_freq`` to
+ adjust the clock increment rate for Ethernet devices.
Removed Items
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 883e59a927..68cadc14a5 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock frequency. */
+typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1378,6 +1381,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock frequency */
+ eth_timesync_adjust_freq timesync_adjust_freq;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
index 3bec87bfdb..e273d5853e 100644
--- a/lib/ethdev/ethdev_trace.h
+++ b/lib/ethdev/ethdev_trace.h
@@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_freq,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
index 99e04f5893..a99fec0c1e 100644
--- a/lib/ethdev/ethdev_trace_points.c
+++ b/lib/ethdev/ethdev_trace_points.c
@@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
+ lib.ethdev.timesync_adjust_freq)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index f1c658f49e..660eab2f1e 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
return ret;
}
+int
+rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_freq == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
+
+ rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
+
+ return ret;
+}
+
int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 548fada1c7..0b88a111dd 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5297,6 +5297,25 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
*/
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+/**
+ * Adjust the clock increment rate on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ppm
+ * Parts per million with 16-bit fractional field
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
+
/**
* Read the time from the timesync clock on an Ethernet device.
*
@@ -5312,6 +5331,7 @@ int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
* - 0: Success.
* - -EINVAL: Bad parameter.
*/
+__rte_experimental
int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time);
/**
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 1669055ca5..199480ef07 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -325,6 +325,9 @@ EXPERIMENTAL {
rte_flow_template_table_resizable;
rte_flow_template_table_resize;
rte_flow_template_table_resize_complete;
+
+ # added in 24.11
+ rte_eth_timesync_adjust_freq;
};
INTERNAL {
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] net/ice: add frequency adjustment support for PTP
2024-09-05 10:08 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 10:08 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
@ 2024-09-05 10:08 ` Mingjin Ye
2024-09-05 10:08 ` [PATCH 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
2024-09-05 13:14 ` [PATCH 0/3] add frequency adjustment support for PTP Ferruh Yigit
3 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 10:08 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su
Add ice support for new ethdev API to adjust frequency for IEEE1588
PTP. Also, this patch reworks code for converting software update
to hardware update.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
doc/guides/nics/ice.rst | 15 +++
drivers/net/ice/ice_ethdev.c | 177 ++++++++++++++++++++++++++---------
drivers/net/ice/ice_ethdev.h | 2 +
drivers/net/ice/ice_rxtx.c | 4 +-
4 files changed, 153 insertions(+), 45 deletions(-)
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index ae975d19ad..dec4cc2434 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -328,6 +328,21 @@ Forward Error Correction (FEC)
Supports get/set FEC mode and get FEC capability.
+Time Synchronisation
+~~~~~~~~~~~~~~~~~~~~
+
+The system operator can run a PTP (Precision Time Protocol) client application
+to synchronise the time on the network card (and optionally the time on the
+system) to the PTP master.
+
+ICE PMD supports PTP client applications that use the DPDK IEEE1588 API to
+communicate with the PTP master clock. Note that the PTP client application
+needs to run on the PF and vector mode needs to be disabled.
+
+.. code-block:: console
+
+ examples/dpdk-ptpclient -c f -n 3 -a 0000:ec:00.1 -- -T 1 -p 0x1 --controller=pi
+
Generic Flow Support
~~~~~~~~~~~~~~~~~~~~
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 304f959b7e..33293a917f 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -10,6 +10,7 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
+#include <math.h>
#include <rte_tailq.h>
#include <rte_os_shim.h>
@@ -176,6 +177,7 @@ static int ice_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
static int ice_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp);
static int ice_timesync_adjust_time(struct rte_eth_dev *dev, int64_t delta);
+static int ice_timesync_adjust_freq(struct rte_eth_dev *dev, int64_t ppm);
static int ice_timesync_read_time(struct rte_eth_dev *dev,
struct timespec *timestamp);
static int ice_timesync_write_time(struct rte_eth_dev *dev,
@@ -307,6 +309,7 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
.timesync_read_rx_timestamp = ice_timesync_read_rx_timestamp,
.timesync_read_tx_timestamp = ice_timesync_read_tx_timestamp,
.timesync_adjust_time = ice_timesync_adjust_time,
+ .timesync_adjust_freq = ice_timesync_adjust_freq,
.timesync_read_time = ice_timesync_read_time,
.timesync_write_time = ice_timesync_write_time,
.timesync_disable = ice_timesync_disable,
@@ -2332,6 +2335,34 @@ ice_get_supported_rxdid(struct ice_hw *hw)
return supported_rxdid;
}
+static void ice_ptp_init_info(struct rte_eth_dev *dev)
+{
+ struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ice_adapter *ad =
+ ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+
+ switch (hw->phy_model) {
+ case ICE_PHY_ETH56G:
+ ad->ptp_tx_block = hw->pf_id;
+ ad->ptp_tx_index = 0;
+ break;
+ case ICE_PHY_E810:
+ /* fallthrough */
+ case ICE_PHY_E830:
+ ad->ptp_tx_block = hw->port_info->lport;
+ ad->ptp_tx_index = 0;
+ break;
+ case ICE_PHY_E822:
+ ad->ptp_tx_block = hw->pf_id / ICE_PORTS_PER_QUAD;
+ ad->ptp_tx_index = (hw->pf_id % ICE_PORTS_PER_QUAD) *
+ ICE_PORTS_PER_PHY_E822 * ICE_QUADS_PER_PHY_E822;
+ break;
+ default:
+ PMD_DRV_LOG(WARNING, "Unsupported PHY model");
+ break;
+ }
+}
+
static int
ice_dev_init(struct rte_eth_dev *dev)
{
@@ -2499,6 +2530,9 @@ ice_dev_init(struct rte_eth_dev *dev)
/* Initialize PHY model */
ice_ptp_init_phy_model(hw);
+ /* Initialize PTP info */
+ ice_ptp_init_info(dev);
+
if (hw->phy_model == ICE_PHY_E822) {
ret = ice_start_phy_timer_e822(hw, hw->pf_id);
if (ret)
@@ -6466,23 +6500,6 @@ ice_timesync_enable(struct rte_eth_dev *dev)
}
}
- /* Initialize cycle counters for system time/RX/TX timestamp */
- memset(&ad->systime_tc, 0, sizeof(struct rte_timecounter));
- memset(&ad->rx_tstamp_tc, 0, sizeof(struct rte_timecounter));
- memset(&ad->tx_tstamp_tc, 0, sizeof(struct rte_timecounter));
-
- ad->systime_tc.cc_mask = ICE_CYCLECOUNTER_MASK;
- ad->systime_tc.cc_shift = 0;
- ad->systime_tc.nsec_mask = 0;
-
- ad->rx_tstamp_tc.cc_mask = ICE_CYCLECOUNTER_MASK;
- ad->rx_tstamp_tc.cc_shift = 0;
- ad->rx_tstamp_tc.nsec_mask = 0;
-
- ad->tx_tstamp_tc.cc_mask = ICE_CYCLECOUNTER_MASK;
- ad->tx_tstamp_tc.cc_shift = 0;
- ad->tx_tstamp_tc.nsec_mask = 0;
-
ad->ptp_ena = 1;
return 0;
@@ -6497,14 +6514,13 @@ ice_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
struct ice_rx_queue *rxq;
uint32_t ts_high;
- uint64_t ts_ns, ns;
+ uint64_t ts_ns;
rxq = dev->data->rx_queues[flags];
ts_high = rxq->time_high;
ts_ns = ice_tstamp_convert_32b_64b(hw, ad, 1, ts_high);
- ns = rte_timecounter_update(&ad->rx_tstamp_tc, ts_ns);
- *timestamp = rte_ns_to_timespec(ns);
+ *timestamp = rte_ns_to_timespec(ts_ns);
return 0;
}
@@ -6516,22 +6532,18 @@ ice_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct ice_adapter *ad =
ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
- uint8_t lport;
- uint64_t ts_ns, ns, tstamp;
+ uint64_t ts_ns, tstamp;
const uint64_t mask = 0xFFFFFFFF;
int ret;
- lport = hw->port_info->lport;
-
- ret = ice_read_phy_tstamp(hw, lport, 0, &tstamp);
- if (ret) {
+ ret = ice_read_phy_tstamp(hw, ad->ptp_tx_block, ad->ptp_tx_index, &tstamp);
+ if (ret || tstamp == 0) {
PMD_DRV_LOG(ERR, "Failed to read phy timestamp");
return -1;
}
ts_ns = ice_tstamp_convert_32b_64b(hw, ad, 1, (tstamp >> 8) & mask);
- ns = rte_timecounter_update(&ad->tx_tstamp_tc, ts_ns);
- *timestamp = rte_ns_to_timespec(ns);
+ *timestamp = rte_ns_to_timespec(ts_ns);
return 0;
}
@@ -6539,28 +6551,108 @@ ice_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
static int
ice_timesync_adjust_time(struct rte_eth_dev *dev, int64_t delta)
{
- struct ice_adapter *ad =
- ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+ struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint8_t tmr_idx = hw->func_caps.ts_func_info.tmr_index_assoc;
+ uint32_t lo, lo2, hi;
+ uint64_t time, ns;
+ int ret;
+
+ if (delta > INT32_MAX || delta < INT32_MIN) {
+ lo = ICE_READ_REG(hw, GLTSYN_TIME_L(tmr_idx));
+ hi = ICE_READ_REG(hw, GLTSYN_TIME_H(tmr_idx));
+ lo2 = ICE_READ_REG(hw, GLTSYN_TIME_L(tmr_idx));
+
+ if (lo2 < lo) {
+ lo = ICE_READ_REG(hw, GLTSYN_TIME_L(tmr_idx));
+ hi = ICE_READ_REG(hw, GLTSYN_TIME_H(tmr_idx));
+ }
+
+ time = ((uint64_t)hi << 32) | lo;
+ ns = time + delta;
+
+ wr32(hw, GLTSYN_SHTIME_L(tmr_idx), ICE_LO_DWORD(ns));
+ wr32(hw, GLTSYN_SHTIME_H(tmr_idx), ICE_HI_DWORD(ns));
+ wr32(hw, GLTSYN_SHTIME_0(tmr_idx), 0);
+
+ ret = ice_ptp_init_time(hw, ns, true);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "PTP init time failed, err %d", ret);
+ return -1;
+ }
+ return 0;
+ }
+
+ ret = ice_ptp_adj_clock(hw, delta, true);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "PTP adj clock failed, err %d", ret);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+ice_timesync_adjust_freq(struct rte_eth_dev *dev, int64_t ppm)
+{
+ struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ int64_t incval, diff = 0;
+ bool negative = false;
+ uint64_t div, rem;
+ uint64_t divisor = 1000000ULL << 16;
+ int shift;
+ int ret;
+
+ incval = ice_get_base_incval(hw, ICE_SRC_TMR_MODE_NANOSECONDS);
+
+ if (ppm < 0) {
+ negative = true;
+ ppm = -ppm;
+ }
+
+ /* can incval * ppm overflow ? */
+ if (log2(incval) + log2(ppm) > 62) {
+ rem = ppm % divisor;
+ div = ppm / divisor;
+ diff = div * incval;
+ ppm = rem;
- ad->systime_tc.nsec += delta;
- ad->rx_tstamp_tc.nsec += delta;
- ad->tx_tstamp_tc.nsec += delta;
+ shift = log2(incval) + log2(ppm) - 62;
+ if (shift > 0) {
+ /* drop precision */
+ ppm >>= shift;
+ divisor >>= shift;
+ }
+ }
+
+ if (divisor)
+ diff = diff + incval * ppm / divisor;
+
+ if (negative)
+ incval -= diff;
+ else
+ incval += diff;
+ ret = ice_ptp_write_incval_locked(hw, incval, true);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "PTP failed to set incval, err %d", ret);
+ return -1;
+ }
return 0;
}
static int
ice_timesync_write_time(struct rte_eth_dev *dev, const struct timespec *ts)
{
- struct ice_adapter *ad =
- ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+ struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint64_t ns;
+ int ret;
ns = rte_timespec_to_ns(ts);
-
- ad->systime_tc.nsec = ns;
- ad->rx_tstamp_tc.nsec = ns;
- ad->tx_tstamp_tc.nsec = ns;
+ ret = ice_ptp_init_time(hw, ns, true);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "PTP init time failed, err %d", ret);
+ return -1;
+ }
return 0;
}
@@ -6569,11 +6661,9 @@ static int
ice_timesync_read_time(struct rte_eth_dev *dev, struct timespec *ts)
{
struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct ice_adapter *ad =
- ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
uint8_t tmr_idx = hw->func_caps.ts_func_info.tmr_index_assoc;
uint32_t hi, lo, lo2;
- uint64_t time, ns;
+ uint64_t time;
lo = ICE_READ_REG(hw, GLTSYN_TIME_L(tmr_idx));
hi = ICE_READ_REG(hw, GLTSYN_TIME_H(tmr_idx));
@@ -6585,8 +6675,7 @@ ice_timesync_read_time(struct rte_eth_dev *dev, struct timespec *ts)
}
time = ((uint64_t)hi << 32) | lo;
- ns = rte_timecounter_update(&ad->systime_tc, time);
- *ts = rte_ns_to_timespec(ns);
+ *ts = rte_ns_to_timespec(time);
return 0;
}
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index 3ea9f37dc8..db192e76fe 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -614,6 +614,8 @@ struct ice_adapter {
struct rte_timecounter systime_tc;
struct rte_timecounter rx_tstamp_tc;
struct rte_timecounter tx_tstamp_tc;
+ uint8_t ptp_tx_block;
+ uint8_t ptp_tx_index;
bool ptp_ena;
uint64_t time_hw;
struct ice_fdir_prof_info fdir_prof_info[ICE_MAX_PTGS];
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index f270498ed1..5f399e8aae 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -3066,7 +3066,9 @@ ice_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
else if (ol_flags & RTE_MBUF_F_TX_IEEE1588_TMST)
cd_type_cmd_tso_mss |=
((uint64_t)ICE_TX_CTX_DESC_TSYN <<
- ICE_TXD_CTX_QW1_CMD_S);
+ ICE_TXD_CTX_QW1_CMD_S) |
+ (((uint64_t)txq->vsi->adapter->ptp_tx_index <<
+ ICE_TXD_CTX_QW1_TSYN_S) & ICE_TXD_CTX_QW1_TSYN_M);
ctx_txd->tunneling_params =
rte_cpu_to_le_32(cd_tunneling_params);
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/3] examples/ptpclient: add frequency adjustment support
2024-09-05 10:08 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 10:08 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-05 10:08 ` [PATCH 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
@ 2024-09-05 10:08 ` Mingjin Ye
2024-09-05 13:14 ` [PATCH 0/3] add frequency adjustment support for PTP Ferruh Yigit
3 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 10:08 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su, Wenjun Wu, Kirill Rybalchenko
This patch adds PI servo algorithm to support frequency
adjustment API for IEEE1588 PTP.
For example, the command for starting ptpclient with PI algorithm is:
./build/examples/dpdk-ptpclient -a 0000:81:00.0 -c 1 -n 3 -- -T 0 -p 0x1
--controller=pi
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
examples/ptpclient/ptpclient.c | 300 +++++++++++++++++++++++++++++----
1 file changed, 265 insertions(+), 35 deletions(-)
diff --git a/examples/ptpclient/ptpclient.c b/examples/ptpclient/ptpclient.c
index afb61bba51..b97b858310 100644
--- a/examples/ptpclient/ptpclient.c
+++ b/examples/ptpclient/ptpclient.c
@@ -46,6 +46,35 @@ static volatile bool force_quit;
#define KERNEL_TIME_ADJUST_LIMIT 20000
#define PTP_PROTOCOL 0x88F7
+#define KP 0.7
+#define KI 0.3
+#define FREQ_EST_MARGIN 0.001
+
+enum servo_state {
+ SERVO_UNLOCKED,
+ SERVO_JUMP,
+ SERVO_LOCKED,
+};
+
+struct pi_servo {
+ double offset[2];
+ double local[2];
+ double drift;
+ double last_freq;
+ int count;
+
+ double max_frequency;
+ double step_threshold;
+ double first_step_threshold;
+ int first_update;
+};
+
+enum controller_mode {
+ MODE_NONE,
+ MODE_PI,
+ MAX_ALL
+} mode = MODE_PI;
+
struct rte_mempool *mbuf_pool;
uint32_t ptp_enabled_port_mask;
uint8_t ptp_enabled_port_nb;
@@ -135,6 +164,9 @@ struct ptpv2_data_slave_ordinary {
uint8_t ptpset;
uint8_t kernel_time_set;
uint16_t current_ptp_port;
+ int64_t master_offset;
+ int64_t path_delay;
+ struct pi_servo *servo;
};
static struct ptpv2_data_slave_ordinary ptp_data;
@@ -293,36 +325,44 @@ print_clock_info(struct ptpv2_data_slave_ordinary *ptp_data)
ptp_data->tstamp3.tv_sec,
(ptp_data->tstamp3.tv_nsec));
- printf("\nT4 - Master Clock. %lds %ldns ",
+ printf("\nT4 - Master Clock. %lds %ldns\n",
ptp_data->tstamp4.tv_sec,
(ptp_data->tstamp4.tv_nsec));
- printf("\nDelta between master and slave clocks:%"PRId64"ns\n",
+ if (mode == MODE_NONE) {
+ printf("\nDelta between master and slave clocks:%"PRId64"ns\n",
ptp_data->delta);
- clock_gettime(CLOCK_REALTIME, &sys_time);
- rte_eth_timesync_read_time(ptp_data->current_ptp_port, &net_time);
+ clock_gettime(CLOCK_REALTIME, &sys_time);
+ rte_eth_timesync_read_time(ptp_data->current_ptp_port,
+ &net_time);
- time_t ts = net_time.tv_sec;
+ time_t ts = net_time.tv_sec;
- printf("\n\nComparison between Linux kernel Time and PTP:");
+ printf("\n\nComparison between Linux kernel Time and PTP:");
- printf("\nCurrent PTP Time: %.24s %.9ld ns",
+ printf("\nCurrent PTP Time: %.24s %.9ld ns",
ctime(&ts), net_time.tv_nsec);
- nsec = (int64_t)timespec64_to_ns(&net_time) -
+ nsec = (int64_t)timespec64_to_ns(&net_time) -
(int64_t)timespec64_to_ns(&sys_time);
- ptp_data->new_adj = ns_to_timeval(nsec);
+ ptp_data->new_adj = ns_to_timeval(nsec);
- gettimeofday(&ptp_data->new_adj, NULL);
+ gettimeofday(&ptp_data->new_adj, NULL);
- time_t tp = ptp_data->new_adj.tv_sec;
+ time_t tp = ptp_data->new_adj.tv_sec;
- printf("\nCurrent SYS Time: %.24s %.6ld ns",
- ctime(&tp), ptp_data->new_adj.tv_usec);
+ printf("\nCurrent SYS Time: %.24s %.6ld ns",
+ ctime(&tp), ptp_data->new_adj.tv_usec);
- printf("\nDelta between PTP and Linux Kernel time:%"PRId64"ns\n",
- nsec);
+ printf("\nDelta between PTP and Linux Kernel time:%"PRId64"ns\n",
+ nsec);
+ }
+
+ if (mode == MODE_PI) {
+ printf("path delay: %"PRId64"ns\n", ptp_data->path_delay);
+ printf("master offset: %"PRId64"ns\n", ptp_data->master_offset);
+ }
printf("[Ctrl+C to quit]\n");
@@ -385,21 +425,11 @@ parse_sync(struct ptpv2_data_slave_ordinary *ptp_data, uint16_t rx_tstamp_idx)
static void
parse_fup(struct ptpv2_data_slave_ordinary *ptp_data)
{
- struct rte_ether_hdr *eth_hdr;
- struct rte_ether_addr eth_addr;
struct ptp_header *ptp_hdr;
- struct clock_id *client_clkid;
struct ptp_message *ptp_msg;
- struct delay_req_msg *req_msg;
- struct rte_mbuf *created_pkt;
struct tstamp *origin_tstamp;
- struct rte_ether_addr eth_multicast = ether_multicast;
- size_t pkt_size;
- int wait_us;
struct rte_mbuf *m = ptp_data->m;
- int ret;
- eth_hdr = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
ptp_hdr = rte_pktmbuf_mtod_offset(m, struct ptp_header *,
sizeof(struct rte_ether_hdr));
if (memcmp(&ptp_data->master_clock_id,
@@ -416,6 +446,150 @@ parse_fup(struct ptpv2_data_slave_ordinary *ptp_data)
ptp_data->tstamp1.tv_sec =
((uint64_t)ntohl(origin_tstamp->sec_lsb)) |
(((uint64_t)ntohs(origin_tstamp->sec_msb)) << 32);
+}
+
+static double
+pi_sample(struct pi_servo *s, int64_t offset, double local_ts,
+ enum servo_state *state)
+{
+ double ki_term, ppb = s->last_freq;
+ double freq_est_interval, localdiff;
+
+ switch (s->count) {
+ case 0:
+ s->offset[0] = offset;
+ s->local[0] = local_ts;
+ *state = SERVO_UNLOCKED;
+ s->count = 1;
+ break;
+ case 1:
+ s->offset[1] = offset;
+ s->local[1] = local_ts;
+
+ /* Make sure the first sample is older than the second. */
+ if (s->local[0] >= s->local[1]) {
+ *state = SERVO_UNLOCKED;
+ s->count = 0;
+ break;
+ }
+
+ /* Wait long enough before estimating the frequency offset. */
+ localdiff = (s->local[1] - s->local[0]) / 1e9;
+ localdiff += localdiff * FREQ_EST_MARGIN;
+ freq_est_interval = 0.016 / KI;
+ if (freq_est_interval > 1000.0)
+ freq_est_interval = 1000.0;
+
+ if (localdiff < freq_est_interval) {
+ *state = SERVO_UNLOCKED;
+ break;
+ }
+
+ /* Adjust drift by the measured frequency offset. */
+ s->drift += (1e9 - s->drift) * (s->offset[1] - s->offset[0]) /
+ (s->local[1] - s->local[0]);
+
+ if (s->drift < -s->max_frequency)
+ s->drift = -s->max_frequency;
+ else if (s->drift > s->max_frequency)
+ s->drift = s->max_frequency;
+
+ if ((s->first_update &&
+ s->first_step_threshold &&
+ s->first_step_threshold < llabs(offset)) ||
+ (s->step_threshold &&
+ s->step_threshold < llabs(offset)))
+ *state = SERVO_JUMP;
+ else
+ *state = SERVO_LOCKED;
+
+ ppb = s->drift;
+ s->count = 2;
+ break;
+ case 2:
+ /*
+ * reset the clock servo when offset is greater than the max
+ * offset value. Note that the clock jump will be performed in
+ * step 1, so it is not necessary to have clock jump
+ * immediately. This allows re-calculating drift as in initial
+ * clock startup.
+ */
+ if (s->step_threshold &&
+ s->step_threshold < llabs(offset)) {
+ *state = SERVO_UNLOCKED;
+ s->count = 0;
+ break;
+ }
+
+ ki_term = KI * offset;
+ ppb = KP * offset + s->drift + ki_term;
+ if (ppb < -s->max_frequency)
+ ppb = -s->max_frequency;
+ else if (ppb > s->max_frequency)
+ ppb = s->max_frequency;
+ else
+ s->drift += ki_term;
+
+ *state = SERVO_LOCKED;
+ break;
+ }
+
+ s->last_freq = ppb;
+ return ppb;
+}
+
+static void
+ptp_adjust_freq(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ uint64_t t1_ns, t2_ns;
+ double adj_freq;
+ enum servo_state state = SERVO_UNLOCKED;
+
+ t1_ns = timespec64_to_ns(&ptp_data->tstamp1);
+ t2_ns = timespec64_to_ns(&ptp_data->tstamp2);
+ ptp_data->master_offset = t2_ns - t1_ns - ptp_data->path_delay;
+ if (!ptp_data->path_delay)
+ return;
+
+ adj_freq = pi_sample(ptp_data->servo, ptp_data->master_offset, t2_ns,
+ &state);
+
+ switch (state) {
+ case SERVO_UNLOCKED:
+ break;
+ case SERVO_JUMP:
+ ptp_data->servo->first_update = 0;
+ rte_eth_timesync_adjust_freq(ptp_data->portid,
+ -(long)(adj_freq * 65.536));
+ rte_eth_timesync_adjust_time(ptp_data->portid,
+ -ptp_data->master_offset);
+ break;
+ case SERVO_LOCKED:
+ ptp_data->servo->first_update = 0;
+ rte_eth_timesync_adjust_freq(ptp_data->portid,
+ -(long)(adj_freq * 65.536));
+ break;
+ }
+}
+
+static void
+send_delay_request(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ struct rte_ether_hdr *eth_hdr;
+ struct rte_ether_addr eth_addr;
+ struct ptp_header *ptp_hdr;
+ struct clock_id *client_clkid;
+ struct delay_req_msg *req_msg;
+ struct rte_mbuf *created_pkt;
+ struct rte_ether_addr eth_multicast = ether_multicast;
+ size_t pkt_size;
+ int wait_us;
+ struct rte_mbuf *m = ptp_data->m;
+ int ret;
+
+ eth_hdr = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
+ ptp_hdr = (struct ptp_header *)(rte_pktmbuf_mtod(m, char *)
+ + sizeof(struct rte_ether_hdr));
if (ptp_data->seqID_FOLLOWUP == ptp_data->seqID_SYNC) {
ret = rte_eth_macaddr_get(ptp_data->portid, ð_addr);
@@ -488,11 +662,10 @@ parse_fup(struct ptpv2_data_slave_ordinary *ptp_data)
ptp_data->tstamp3.tv_sec = 0;
/* Wait at least 1 us to read TX timestamp. */
- while ((rte_eth_timesync_read_tx_timestamp(ptp_data->portid,
- &ptp_data->tstamp3) < 0) && (wait_us < 1000)) {
+ do {
rte_delay_us(1);
- wait_us++;
- }
+ } while ((rte_eth_timesync_read_tx_timestamp(ptp_data->portid,
+ &ptp_data->tstamp3) < 0) && (wait_us++ < 10));
}
}
@@ -529,6 +702,25 @@ update_kernel_time(void)
}
+static void
+clock_path_delay(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ uint64_t t1_ns, t2_ns, t3_ns, t4_ns;
+ int64_t pd, diff;
+
+ t1_ns = timespec64_to_ns(&ptp_data->tstamp1);
+ t2_ns = timespec64_to_ns(&ptp_data->tstamp2);
+ t3_ns = timespec64_to_ns(&ptp_data->tstamp3);
+ t4_ns = timespec64_to_ns(&ptp_data->tstamp4);
+
+ pd = (t2_ns - t3_ns) + (t4_ns - t1_ns);
+ diff = t3_ns - t2_ns;
+ if (diff <= INT32_MAX && diff >= INT32_MIN)
+ ptp_data->path_delay = pd / 2;
+ else
+ ptp_data->path_delay = 0;
+}
+
/*
* Parse the DELAY_RESP message.
*/
@@ -541,7 +733,7 @@ parse_drsp(struct ptpv2_data_slave_ordinary *ptp_data)
uint16_t seq_id;
ptp_msg = rte_pktmbuf_mtod_offset(m, struct ptp_message *,
- sizeof(struct rte_ether_hdr));
+ sizeof(struct rte_ether_hdr));
seq_id = rte_be_to_cpu_16(ptp_msg->delay_resp.hdr.seq_id);
if (memcmp(&ptp_data->client_clock_id,
&ptp_msg->delay_resp.req_port_id.clock_id,
@@ -553,11 +745,15 @@ parse_drsp(struct ptpv2_data_slave_ordinary *ptp_data)
((uint64_t)ntohl(rx_tstamp->sec_lsb)) |
(((uint64_t)ntohs(rx_tstamp->sec_msb)) << 32);
- /* Evaluate the delta for adjustment. */
- ptp_data->delta = delta_eval(ptp_data);
+ if (mode == MODE_PI) {
+ clock_path_delay(ptp_data);
+ } else {
+ /* Evaluate the delta for adjustment. */
+ ptp_data->delta = delta_eval(ptp_data);
- rte_eth_timesync_adjust_time(ptp_data->portid,
- ptp_data->delta);
+ rte_eth_timesync_adjust_time(ptp_data->portid,
+ ptp_data->delta);
+ }
ptp_data->current_ptp_port = ptp_data->portid;
@@ -597,6 +793,9 @@ parse_ptp_frames(uint16_t portid, struct rte_mbuf *m) {
break;
case FOLLOW_UP:
parse_fup(&ptp_data);
+ if (mode == MODE_PI)
+ ptp_adjust_freq(&ptp_data);
+ send_delay_request(&ptp_data);
break;
case DELAY_RESP:
parse_drsp(&ptp_data);
@@ -688,6 +887,18 @@ parse_ptp_kernel(const char *param)
return 1;
}
+static void
+servo_init(struct pi_servo *servo)
+{
+ memset(servo, 0x00, sizeof(*servo));
+
+ servo->drift = 100000000;
+ servo->last_freq = 100000000;
+ servo->count = 0;
+ servo->max_frequency = 100000000;
+ servo->step_threshold = 0.1 * NSEC_PER_SEC;
+}
+
/* Parse the commandline arguments. */
static int
ptp_parse_args(int argc, char **argv)
@@ -696,7 +907,10 @@ ptp_parse_args(int argc, char **argv)
char **argvopt;
int option_index;
char *prgname = argv[0];
- static struct option lgopts[] = { {NULL, 0, 0, 0} };
+ static struct option lgopts[] = {
+ {"controller", 1, 0, 0},
+ {NULL, 0, 0, 0}
+ };
argvopt = argv;
@@ -724,6 +938,11 @@ ptp_parse_args(int argc, char **argv)
ptp_data.kernel_time_set = ret;
break;
+ case 0:
+ if (!strcmp(lgopts[option_index].name, "controller"))
+ if (!strcmp(optarg, "pi"))
+ mode = MODE_PI;
+ break;
default:
print_usage(prgname);
@@ -778,6 +997,14 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error with PTP initialization\n");
/* >8 End of parsing specific arguments. */
+ if (mode == MODE_PI) {
+ ptp_data.servo = malloc(sizeof(*(ptp_data.servo)));
+ if (!ptp_data.servo)
+ rte_exit(EXIT_FAILURE, "no memory for servo\n");
+
+ servo_init(ptp_data.servo);
+ }
+
/* Check that there is an even number of ports to send/receive on. */
nb_ports = rte_eth_dev_count_avail();
@@ -831,6 +1058,9 @@ main(int argc, char *argv[])
rte_eth_dev_close(portid);
}
+ if (mode == MODE_PI)
+ free(ptp_data.servo);
+
/* clean up the EAL */
rte_eal_cleanup();
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/3] add frequency adjustment support for PTP
2024-09-05 10:08 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
` (2 preceding siblings ...)
2024-09-05 10:08 ` [PATCH 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
@ 2024-09-05 13:14 ` Ferruh Yigit
2024-09-05 13:49 ` Bruce Richardson
3 siblings, 1 reply; 12+ messages in thread
From: Ferruh Yigit @ 2024-09-05 13:14 UTC (permalink / raw)
To: Mingjin Ye, dev; +Cc: Bruce Richardson
On 9/5/2024 11:08 AM, Mingjin Ye wrote:
> [1/3] ethdev: add frequency adjustment API
> [2/3] net/ice: add frequency adjustment support for PTP
> [3/3] examples/ptpclient: add frequency adjustment support
>
> Mingjin Ye (3):
> ethdev: add frequency adjustment API
> net/ice: add frequency adjustment support for PTP
> examples/ptpclient: add frequency adjustment support
>
Hi Mingjin,
You are keep sending same patch, without version information, and
without putting them under same thread.
Can you please consult to Bruce on the process before sending new series
again?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/3] add frequency adjustment support for PTP
2024-09-05 13:14 ` [PATCH 0/3] add frequency adjustment support for PTP Ferruh Yigit
@ 2024-09-05 13:49 ` Bruce Richardson
0 siblings, 0 replies; 12+ messages in thread
From: Bruce Richardson @ 2024-09-05 13:49 UTC (permalink / raw)
To: Ferruh Yigit; +Cc: Mingjin Ye, dev
On Thu, Sep 05, 2024 at 02:14:36PM +0100, Ferruh Yigit wrote:
> On 9/5/2024 11:08 AM, Mingjin Ye wrote:
> > [1/3] ethdev: add frequency adjustment API
> > [2/3] net/ice: add frequency adjustment support for PTP
> > [3/3] examples/ptpclient: add frequency adjustment support
> >
> > Mingjin Ye (3):
> > ethdev: add frequency adjustment API
> > net/ice: add frequency adjustment support for PTP
> > examples/ptpclient: add frequency adjustment support
> >
>
> Hi Mingjin,
>
> You are keep sending same patch, without version information, and
> without putting them under same thread.
>
> Can you please consult to Bruce on the process before sending new series
> again?
>
It's also (partially) documented here [1], though I don't see it explicitly
stated anywhere that new versions must use "-v2", "-v3" etc., and it also
states that for new versions "you *can* add it to the same thread"[2].
We need to tighten up the documentation to make it clear that subsequent
versions of a patch "must" use a version number and that they "must" be
sent in-reply-to the original thread.
/Bruce
[1] https://doc.dpdk.org/guides/contributing/patches.html#creating-patches
[2] https://doc.dpdk.org/guides/contributing/patches.html#sending-patches
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] ethdev: add frequency adjustment API
2024-09-05 9:26 Mingjin Ye
@ 2024-09-05 9:26 ` Mingjin Ye
0 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 9:26 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su, Thomas Monjalon, Ferruh Yigit, Andrew Rybchenko
This patch adds freq adjustment API for PTP high accuracy.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
doc/guides/nics/features.rst | 4 +++-
lib/ethdev/ethdev_driver.h | 5 +++++
lib/ethdev/ethdev_trace.h | 9 +++++++++
lib/ethdev/ethdev_trace_points.c | 3 +++
lib/ethdev/rte_ethdev.c | 18 ++++++++++++++++++
lib/ethdev/rte_ethdev.h | 19 +++++++++++++++++++
lib/ethdev/version.map | 3 +++
7 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index cd0115ffb3..0508f118fe 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -677,10 +677,12 @@ Supports IEEE1588/802.1AS timestamping.
* **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
- ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
+ ``timesync_adjust_time``, ``timesync_adjust_freq``,
+ ``timesync_read_time``, ``timesync_write_time``.
* **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
``rte_eth_timesync_read_rx_timestamp()``,
``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
+ ``rte_eth_timesync_adjust_freq()``,
``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 883e59a927..68cadc14a5 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock frequency. */
+typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1378,6 +1381,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock frequency */
+ eth_timesync_adjust_freq timesync_adjust_freq;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
index 3bec87bfdb..e273d5853e 100644
--- a/lib/ethdev/ethdev_trace.h
+++ b/lib/ethdev/ethdev_trace.h
@@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_freq,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
index 99e04f5893..a99fec0c1e 100644
--- a/lib/ethdev/ethdev_trace_points.c
+++ b/lib/ethdev/ethdev_trace_points.c
@@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
+ lib.ethdev.timesync_adjust_freq)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index f1c658f49e..660eab2f1e 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
return ret;
}
+int
+rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_freq == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
+
+ rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
+
+ return ret;
+}
+
int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 548fada1c7..42fa2ca39c 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5297,6 +5297,25 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
*/
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+/**
+ * Adjust the clock increment rate on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ppm
+ * Parts per million with 16-bit fractional field
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
+
/**
* Read the time from the timesync clock on an Ethernet device.
*
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 1669055ca5..199480ef07 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -325,6 +325,9 @@ EXPERIMENTAL {
rte_flow_template_table_resizable;
rte_flow_template_table_resize;
rte_flow_template_table_resize_complete;
+
+ # added in 24.11
+ rte_eth_timesync_adjust_freq;
};
INTERNAL {
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] ethdev: add frequency adjustment API
2024-09-05 9:05 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
@ 2024-09-05 9:05 ` Mingjin Ye
0 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 9:05 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su, Thomas Monjalon, Ferruh Yigit, Andrew Rybchenko
This patch adds freq adjustment API for PTP high accuracy.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
doc/guides/nics/features.rst | 4 +++-
lib/ethdev/ethdev_driver.h | 5 +++++
lib/ethdev/ethdev_trace.h | 9 +++++++++
lib/ethdev/ethdev_trace_points.c | 3 +++
lib/ethdev/rte_ethdev.c | 18 ++++++++++++++++++
lib/ethdev/rte_ethdev.h | 19 +++++++++++++++++++
lib/ethdev/version.map | 1 +
7 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index cd0115ffb3..0508f118fe 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -677,10 +677,12 @@ Supports IEEE1588/802.1AS timestamping.
* **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
- ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
+ ``timesync_adjust_time``, ``timesync_adjust_freq``,
+ ``timesync_read_time``, ``timesync_write_time``.
* **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
``rte_eth_timesync_read_rx_timestamp()``,
``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
+ ``rte_eth_timesync_adjust_freq()``,
``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 883e59a927..68cadc14a5 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock frequency. */
+typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1378,6 +1381,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock frequency */
+ eth_timesync_adjust_freq timesync_adjust_freq;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
index 3bec87bfdb..e273d5853e 100644
--- a/lib/ethdev/ethdev_trace.h
+++ b/lib/ethdev/ethdev_trace.h
@@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_freq,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
index 99e04f5893..a99fec0c1e 100644
--- a/lib/ethdev/ethdev_trace_points.c
+++ b/lib/ethdev/ethdev_trace_points.c
@@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
+ lib.ethdev.timesync_adjust_freq)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index f1c658f49e..660eab2f1e 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
return ret;
}
+int
+rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_freq == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
+
+ rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
+
+ return ret;
+}
+
int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 548fada1c7..42fa2ca39c 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5297,6 +5297,25 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
*/
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+/**
+ * Adjust the clock increment rate on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ppm
+ * Parts per million with 16-bit fractional field
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
+
/**
* Read the time from the timesync clock on an Ethernet device.
*
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 1669055ca5..7f751b5685 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -106,6 +106,7 @@ DPDK_25 {
rte_eth_stats_get;
rte_eth_stats_reset;
rte_eth_timesync_adjust_time;
+ rte_eth_timesync_adjust_freq;
rte_eth_timesync_disable;
rte_eth_timesync_enable;
rte_eth_timesync_read_rx_timestamp;
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] ethdev: add frequency adjustment API
2024-09-05 1:31 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
@ 2024-09-05 1:31 ` Mingjin Ye
0 siblings, 0 replies; 12+ messages in thread
From: Mingjin Ye @ 2024-09-05 1:31 UTC (permalink / raw)
To: dev; +Cc: Mingjin Ye, Simei Su, Thomas Monjalon, Ferruh Yigit, Andrew Rybchenko
This patch adds freq adjustment API for PTP high accuracy.
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
doc/guides/nics/features.rst | 3 ++-
lib/ethdev/ethdev_driver.h | 5 +++++
lib/ethdev/ethdev_trace.h | 9 +++++++++
lib/ethdev/ethdev_trace_points.c | 3 +++
lib/ethdev/rte_ethdev.c | 18 ++++++++++++++++++
lib/ethdev/rte_ethdev.h | 19 +++++++++++++++++++
6 files changed, 56 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index cd0115ffb3..a2a19623b7 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -677,7 +677,8 @@ Supports IEEE1588/802.1AS timestamping.
* **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
- ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
+ ``timesync_adjust_time``, ``timesync_adjust_freq``,
+ ``timesync_read_time``, ``timesync_write_time``.
* **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
``rte_eth_timesync_read_rx_timestamp()``,
``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 883e59a927..68cadc14a5 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock frequency. */
+typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1378,6 +1381,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock frequency */
+ eth_timesync_adjust_freq timesync_adjust_freq;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
index 3bec87bfdb..e273d5853e 100644
--- a/lib/ethdev/ethdev_trace.h
+++ b/lib/ethdev/ethdev_trace.h
@@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_freq,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
index 99e04f5893..a99fec0c1e 100644
--- a/lib/ethdev/ethdev_trace_points.c
+++ b/lib/ethdev/ethdev_trace_points.c
@@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
+ lib.ethdev.timesync_adjust_freq)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index f1c658f49e..660eab2f1e 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
return ret;
}
+int
+rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_freq == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
+
+ rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
+
+ return ret;
+}
+
int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 548fada1c7..42fa2ca39c 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5297,6 +5297,25 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
*/
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+/**
+ * Adjust the clock increment rate on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ppm
+ * Parts per million with 16-bit fractional field
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
+
/**
* Read the time from the timesync clock on an Ethernet device.
*
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 1/3] ethdev: add frequency adjustment API
2023-09-18 14:50 ` Ferruh Yigit
@ 2023-09-28 6:19 ` Su, Simei
0 siblings, 0 replies; 12+ messages in thread
From: Su, Simei @ 2023-09-28 6:19 UTC (permalink / raw)
To: Ferruh Yigit, thomas, andrew.rybchenko, Rybalchenko, Kirill, Zhang, Qi Z
Cc: dev, Wu, Wenjun1
Hi Ferruh,
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@amd.com>
> Sent: Monday, September 18, 2023 10:51 PM
> To: Su, Simei <simei.su@intel.com>; thomas@monjalon.net;
> andrew.rybchenko@oktetlabs.ru; Rybalchenko, Kirill
> <kirill.rybalchenko@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>
> Cc: dev@dpdk.org; Wu, Wenjun1 <wenjun1.wu@intel.com>
> Subject: Re: [PATCH 1/3] ethdev: add frequency adjustment API
>
> On 8/9/2023 6:06 AM, Simei Su wrote:
> > This patch introduces a new timesync API "rte_eth_timesync_adjust_fine"
> > which enables finer adjustment of the PHC clock. During PTP timesync,
> > "rte_eth_timesync_adjust_time" focuses on phase adjustment while
> > "rte_eth_timesync_adjust_fine" focuses on frequency adjustment.
> >
>
> Hi Simei,
>
> The patch adds new API and new dev_ops, mechanics of it mostly looks good,
> there is minor comment below.
>
> But there is not much comment on it because concept may be not well known
> as it is not much known to me. Can you please try to add more details and
> documentations to help users and driver developers?
OK. I will rework this patchset and add more details in the next version.
>
>
> I have some understanding based on your comments, can you please check if it
> is correct:
>
> In PTP protocol master and client synchronize clocks periodically, and adjust
> the delta with 'rte_eth_timesync_adjust_time()' API, which simply use this
> delta as offset in its time function.
>
> But new API added by this patch, 'rte_eth_timesync_adjust_fine()', adds a new
> synchronization method by saying device to change its HW timer frequency.
Yes. It's correct.
>
> The name of the API says this is a finer adjustment method, I wonder why? I
> don't know much about timer HW but my understanding is they are pretty
> accurate, why changing frequency gives a finer adjustment? Is it common that
> difference frequency of HW timers cause drift by time?
The "fine" in 'rte_eth_timesync_adjust_fine()' means that it's adjusted in fine-granularity while
'rte_eth_timesync_adjust_time()' is in coarse-granularity adjustment.
We refer to API in Linux kernel.
The internal PTP Hardware Clock (PHC) interface limits the resolution for frequency adjustments to one part per billion. However, some hardware devices allow finer adjustment and making use of the increased resolution improves synchronization measurably on such devices.
This method allows finer frequency tuning by passing the scaled ppm value to PHC drivers. This value comes from user space.
>
> Btw, what is PHC clock? Is it "Pulse Hollow Cathode" (as chatGPT suggests :), is
> there any significance of this type of clock? Is this API valid only for this type of
> clock?
>
PHC means "PTP Hardware Clock". It's hardware clock on NIC.
>
> And for users, assuming the HW supports both methods, how should they
> decide which one to use? Can we provide some guidance to them? I can see
> API suggest to use 'rte_eth_timesync_adjust_fine()' when time diff offset is less
> than a threshold but what is the threshold and what happens if user only uses
> 'rte_eth_timesync_adjust_time()'?
> Is there a more real life numbers to provide as samples, maybe can provide
> them in the commit log as sample if we can't provide them in API
> documentation?
>
Theoretically, both methods should be used at different moments.
At the beginning, the offset between master and slave is large, time adjustment API should be called at one time to make the offset smaller. When the offset is less than a value(called as threshold), fine-granularity adjustment API should be always called.
In this patch, I let user choose whether using fine-granularity adjustment with "-- controller=pi" because I don't want to break current design in "ptpclient" application and compatible with current logic. For example, some PMDs don't have the new API support which can't use fine-granularity adjustment method.
>
> > This new function gets the scaled_ppm (desired frequency offset from
> > nominal frequency in parts per million, but with a 16 bit binary
> > fractional field).
> >
>
> What is "scaled parts per million"? I think I understand what parameter does,
> but not sure about what is the unit here?
>
> Also PTP client sample mentions about algorithms to use for frequency
> adjustment, like PI servo algorithm next patch uses, what are these
> algorithms?
> Should we mention from algorithms or specifically from "PI servo algorithm" in
> the API documentation?
This is a classic control algorithm (Proportional-Integral algorithm).
For this algorithm, we need to continue to optimize it and will give more explanations in the next version.
Because of the further optimization for the algorithm, we may plan to upstream it in the early DPDK 24.03, not in DPDK 23.11.
>
> > Signed-off-by: Simei Su <simei.su@intel.com>
> > Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
> > ---
> > lib/ethdev/ethdev_driver.h | 5 +++++
> > lib/ethdev/ethdev_trace.h | 9 +++++++++
> > lib/ethdev/ethdev_trace_points.c | 3 +++
> > lib/ethdev/rte_ethdev.c | 19 +++++++++++++++++++
> > lib/ethdev/rte_ethdev.h | 38
> ++++++++++++++++++++++++++++++++++++++
>
> 'version.map' also should be updated to export the API, so that DPDK
> applications linked with shared DPDK library can use it.
>
> CI already complaining about this:
> https://mails.dpdk.org/archives/test-report/2023-August/435936.html
OK. I will update 'version.map' in the next version.
Thanks,
Simei
>
>
> > 5 files changed, 74 insertions(+)
> >
> > diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
> > index 980f837..4c39c3d 100644
> > --- a/lib/ethdev/ethdev_driver.h
> > +++ b/lib/ethdev/ethdev_driver.h
> > @@ -636,6 +636,9 @@ typedef int
> > (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
> > /** @internal Function used to adjust the device clock. */ typedef
> > int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
> >
> > +/** @internal Function used to adjust the clock increment rate. */
> > +typedef int (*eth_timesync_adjust_fine)(struct rte_eth_dev *dev,
> > +int64_t);
> > +
> > /** @internal Function used to get time from the device clock. */
> > typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
> > struct timespec *timestamp); @@ -1347,6 +1350,8
> @@ struct
> > eth_dev_ops {
> > eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
> > /** Adjust the device clock */
> > eth_timesync_adjust_time timesync_adjust_time;
> > + /** Adjust the clock increment rate */
> > + eth_timesync_adjust_fine timesync_adjust_fine;
> > /** Get the device clock time */
> > eth_timesync_read_time timesync_read_time;
> > /** Set the device clock time */
> > diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
> > index 423e712..d613eb2 100644
> > --- a/lib/ethdev/ethdev_trace.h
> > +++ b/lib/ethdev/ethdev_trace.h
> > @@ -2175,6 +2175,15 @@ RTE_TRACE_POINT_FP(
> > rte_trace_point_emit_int(ret);
> > )
> >
> > +/* Called in loop in examples/ptpclient */ RTE_TRACE_POINT_FP(
> > + rte_eth_trace_timesync_adjust_fine,
> > + RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t scaled_ppm, int ret),
> > + rte_trace_point_emit_u16(port_id);
> > + rte_trace_point_emit_i64(scaled_ppm);
> > + rte_trace_point_emit_int(ret);
> > +)
> > +
> > /* Called in loop in app/test-flow-perf */ RTE_TRACE_POINT_FP(
> > rte_flow_trace_create,
> > diff --git a/lib/ethdev/ethdev_trace_points.c
> > b/lib/ethdev/ethdev_trace_points.c
> > index 91f71d8..eb539bb 100644
> > --- a/lib/ethdev/ethdev_trace_points.c
> > +++ b/lib/ethdev/ethdev_trace_points.c
> > @@ -406,6 +406,9 @@
> > RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
> > RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
> > lib.ethdev.timesync_adjust_time)
> >
> > +RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_fine,
> > + lib.ethdev.timesync_adjust_fine)
> > +
> > RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
> > lib.ethdev.timesync_read_time)
> >
> > diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c index
> > 0840d2b..7b75214 100644
> > --- a/lib/ethdev/rte_ethdev.c
> > +++ b/lib/ethdev/rte_ethdev.c
> > @@ -6109,6 +6109,25 @@ rte_eth_timesync_adjust_time(uint16_t port_id,
> > int64_t delta) }
> >
> > int
> > +rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t scaled_ppm) {
> > + struct rte_eth_dev *dev;
> > + int ret;
> > +
> > + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> > + dev = &rte_eth_devices[port_id];
> > +
> > + if (*dev->dev_ops->timesync_adjust_fine == NULL)
> > + return -ENOTSUP;
> > + ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_fine)(dev,
> > + scaled_ppm));
> > +
> > + rte_eth_trace_timesync_adjust_fine(port_id, scaled_ppm, ret);
> > +
> > + return ret;
> > +}
> > +
> > +int
> > rte_eth_timesync_read_time(uint16_t port_id, struct timespec
> > *timestamp) {
> > struct rte_eth_dev *dev;
> > diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h index
> > 3d44979..78fc07c 100644
> > --- a/lib/ethdev/rte_ethdev.h
> > +++ b/lib/ethdev/rte_ethdev.h
> > @@ -5145,6 +5145,44 @@ int
> rte_eth_timesync_read_tx_timestamp(uint16_t
> > port_id, int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t
> > delta);
> >
> > /**
> > + * Adjust the frequency of the PHC cycle counter by the indicated
> > +amount
> > + * from the base frequency.
> > + *
> > + * This function is used to do hardware timestamp adjustment in fine
> > + * granularity. It can be used in conjunction with
> > +rte_eth_timesync_adjust_time
> > + * to do more precise time control.
> > + *
> > + * E.g, below is a simple usage:
> > + * if master offset > master offset threshold
> > + * do rte_eth_timesync_adjust_time;
> > + * else
> > + * do rte_eth_timesync_adjust_fine;
> > + *
> > + * The user can apply a control algorithm to leverage these two APIs,
> > +one
> > + * example is in dpdk-ptpclient.
> > + *
> > + * This API is implemented with the below basic logic:
> > + * - Determine a base frequency value
> > + * - Multiply this by the abs() of the requested adjustment, then divide by
> > + * the appropriate divisor (65536 billion).
> > + * - Add or subtract this difference from the base frequency to calculate a
> > + * new adjustment.
> > + *
> > + * @param port_id
> > + * The port identifier of the Ethernet device.
> > + * @param scaled_ppm
> > + * Desired frequency change in scaled parts per million. Scaled
> > +parts per
> > + * million is ppm with a 16-bit binary fractional field.
> > + *
> > + * @return
> > + * - 0: Success.
> > + * - -ENODEV: The port ID is invalid.
> > + * - -EIO: if device is removed.
> > + * - -ENOTSUP: The function is not supported by the Ethernet driver.
> > + */
> > +int rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t
> > +scaled_ppm);
> > +
> > +/**
> > * Read the time from the timesync clock on an Ethernet device.
> > *
> > * This is usually used in conjunction with other Ethdev timesync
> > functions to
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] ethdev: add frequency adjustment API
2023-08-09 5:06 ` [PATCH 1/3] ethdev: add frequency adjustment API Simei Su
@ 2023-09-18 14:50 ` Ferruh Yigit
2023-09-28 6:19 ` Su, Simei
0 siblings, 1 reply; 12+ messages in thread
From: Ferruh Yigit @ 2023-09-18 14:50 UTC (permalink / raw)
To: Simei Su, thomas, andrew.rybchenko, kirill.rybalchenko, qi.z.zhang
Cc: dev, wenjun1.wu
On 8/9/2023 6:06 AM, Simei Su wrote:
> This patch introduces a new timesync API "rte_eth_timesync_adjust_fine"
> which enables finer adjustment of the PHC clock. During PTP timesync,
> "rte_eth_timesync_adjust_time" focuses on phase adjustment while
> "rte_eth_timesync_adjust_fine" focuses on frequency adjustment.
>
Hi Simei,
The patch adds new API and new dev_ops, mechanics of it mostly looks
good, there is minor comment below.
But there is not much comment on it because concept may be not well
known as it is not much known to me. Can you please try to add more
details and documentations to help users and driver developers?
I have some understanding based on your comments, can you please check
if it is correct:
In PTP protocol master and client synchronize clocks periodically, and
adjust the delta with 'rte_eth_timesync_adjust_time()' API, which simply
use this delta as offset in its time function.
But new API added by this patch, 'rte_eth_timesync_adjust_fine()', adds
a new synchronization method by saying device to change its HW timer
frequency.
The name of the API says this is a finer adjustment method, I wonder
why? I don't know much about timer HW but my understanding is they are
pretty accurate, why changing frequency gives a finer adjustment? Is it
common that difference frequency of HW timers cause drift by time?
Btw, what is PHC clock? Is it "Pulse Hollow Cathode" (as chatGPT
suggests :), is there any significance of this type of clock? Is this
API valid only for this type of clock?
And for users, assuming the HW supports both methods, how should they
decide which one to use? Can we provide some guidance to them? I can see
API suggest to use 'rte_eth_timesync_adjust_fine()' when time diff
offset is less than a threshold but what is the threshold and what
happens if user only uses 'rte_eth_timesync_adjust_time()'?
Is there a more real life numbers to provide as samples, maybe can
provide them in the commit log as sample if we can't provide them in API
documentation?
> This new function gets the scaled_ppm (desired frequency offset from
> nominal frequency in parts per million, but with a 16 bit binary
> fractional field).
>
What is "scaled parts per million"? I think I understand what parameter
does, but not sure about what is the unit here?
Also PTP client sample mentions about algorithms to use for frequency
adjustment, like PI servo algorithm next patch uses, what are these
algorithms?
Should we mention from algorithms or specifically from "PI servo
algorithm" in the API documentation?
> Signed-off-by: Simei Su <simei.su@intel.com>
> Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
> ---
> lib/ethdev/ethdev_driver.h | 5 +++++
> lib/ethdev/ethdev_trace.h | 9 +++++++++
> lib/ethdev/ethdev_trace_points.c | 3 +++
> lib/ethdev/rte_ethdev.c | 19 +++++++++++++++++++
> lib/ethdev/rte_ethdev.h | 38 ++++++++++++++++++++++++++++++++++++++
'version.map' also should be updated to export the API, so that DPDK
applications linked with shared DPDK library can use it.
CI already complaining about this:
https://mails.dpdk.org/archives/test-report/2023-August/435936.html
> 5 files changed, 74 insertions(+)
>
> diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
> index 980f837..4c39c3d 100644
> --- a/lib/ethdev/ethdev_driver.h
> +++ b/lib/ethdev/ethdev_driver.h
> @@ -636,6 +636,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
> /** @internal Function used to adjust the device clock. */
> typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
>
> +/** @internal Function used to adjust the clock increment rate. */
> +typedef int (*eth_timesync_adjust_fine)(struct rte_eth_dev *dev, int64_t);
> +
> /** @internal Function used to get time from the device clock. */
> typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
> struct timespec *timestamp);
> @@ -1347,6 +1350,8 @@ struct eth_dev_ops {
> eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
> /** Adjust the device clock */
> eth_timesync_adjust_time timesync_adjust_time;
> + /** Adjust the clock increment rate */
> + eth_timesync_adjust_fine timesync_adjust_fine;
> /** Get the device clock time */
> eth_timesync_read_time timesync_read_time;
> /** Set the device clock time */
> diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
> index 423e712..d613eb2 100644
> --- a/lib/ethdev/ethdev_trace.h
> +++ b/lib/ethdev/ethdev_trace.h
> @@ -2175,6 +2175,15 @@ RTE_TRACE_POINT_FP(
> rte_trace_point_emit_int(ret);
> )
>
> +/* Called in loop in examples/ptpclient */
> +RTE_TRACE_POINT_FP(
> + rte_eth_trace_timesync_adjust_fine,
> + RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t scaled_ppm, int ret),
> + rte_trace_point_emit_u16(port_id);
> + rte_trace_point_emit_i64(scaled_ppm);
> + rte_trace_point_emit_int(ret);
> +)
> +
> /* Called in loop in app/test-flow-perf */
> RTE_TRACE_POINT_FP(
> rte_flow_trace_create,
> diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
> index 91f71d8..eb539bb 100644
> --- a/lib/ethdev/ethdev_trace_points.c
> +++ b/lib/ethdev/ethdev_trace_points.c
> @@ -406,6 +406,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
> RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
> lib.ethdev.timesync_adjust_time)
>
> +RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_fine,
> + lib.ethdev.timesync_adjust_fine)
> +
> RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
> lib.ethdev.timesync_read_time)
>
> diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
> index 0840d2b..7b75214 100644
> --- a/lib/ethdev/rte_ethdev.c
> +++ b/lib/ethdev/rte_ethdev.c
> @@ -6109,6 +6109,25 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
> }
>
> int
> +rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t scaled_ppm)
> +{
> + struct rte_eth_dev *dev;
> + int ret;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> + dev = &rte_eth_devices[port_id];
> +
> + if (*dev->dev_ops->timesync_adjust_fine == NULL)
> + return -ENOTSUP;
> + ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_fine)(dev,
> + scaled_ppm));
> +
> + rte_eth_trace_timesync_adjust_fine(port_id, scaled_ppm, ret);
> +
> + return ret;
> +}
> +
> +int
> rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
> {
> struct rte_eth_dev *dev;
> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
> index 3d44979..78fc07c 100644
> --- a/lib/ethdev/rte_ethdev.h
> +++ b/lib/ethdev/rte_ethdev.h
> @@ -5145,6 +5145,44 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
> int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
>
> /**
> + * Adjust the frequency of the PHC cycle counter by the indicated amount
> + * from the base frequency.
> + *
> + * This function is used to do hardware timestamp adjustment in fine
> + * granularity. It can be used in conjunction with rte_eth_timesync_adjust_time
> + * to do more precise time control.
> + *
> + * E.g, below is a simple usage:
> + * if master offset > master offset threshold
> + * do rte_eth_timesync_adjust_time;
> + * else
> + * do rte_eth_timesync_adjust_fine;
> + *
> + * The user can apply a control algorithm to leverage these two APIs, one
> + * example is in dpdk-ptpclient.
> + *
> + * This API is implemented with the below basic logic:
> + * - Determine a base frequency value
> + * - Multiply this by the abs() of the requested adjustment, then divide by
> + * the appropriate divisor (65536 billion).
> + * - Add or subtract this difference from the base frequency to calculate a
> + * new adjustment.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param scaled_ppm
> + * Desired frequency change in scaled parts per million. Scaled parts per
> + * million is ppm with a 16-bit binary fractional field.
> + *
> + * @return
> + * - 0: Success.
> + * - -ENODEV: The port ID is invalid.
> + * - -EIO: if device is removed.
> + * - -ENOTSUP: The function is not supported by the Ethernet driver.
> + */
> +int rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t scaled_ppm);
> +
> +/**
> * Read the time from the timesync clock on an Ethernet device.
> *
> * This is usually used in conjunction with other Ethdev timesync functions to
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] ethdev: add frequency adjustment API
2023-08-09 5:06 [PATCH 0/3] add frequency adjustment support for PTP timesync Simei Su
@ 2023-08-09 5:06 ` Simei Su
2023-09-18 14:50 ` Ferruh Yigit
0 siblings, 1 reply; 12+ messages in thread
From: Simei Su @ 2023-08-09 5:06 UTC (permalink / raw)
To: thomas, ferruh.yigit, andrew.rybchenko, kirill.rybalchenko, qi.z.zhang
Cc: dev, wenjun1.wu, Simei Su
This patch introduces a new timesync API "rte_eth_timesync_adjust_fine"
which enables finer adjustment of the PHC clock. During PTP timesync,
"rte_eth_timesync_adjust_time" focuses on phase adjustment while
"rte_eth_timesync_adjust_fine" focuses on frequency adjustment.
This new function gets the scaled_ppm (desired frequency offset from
nominal frequency in parts per million, but with a 16 bit binary
fractional field).
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
---
lib/ethdev/ethdev_driver.h | 5 +++++
lib/ethdev/ethdev_trace.h | 9 +++++++++
lib/ethdev/ethdev_trace_points.c | 3 +++
lib/ethdev/rte_ethdev.c | 19 +++++++++++++++++++
lib/ethdev/rte_ethdev.h | 38 ++++++++++++++++++++++++++++++++++++++
5 files changed, 74 insertions(+)
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 980f837..4c39c3d 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -636,6 +636,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock increment rate. */
+typedef int (*eth_timesync_adjust_fine)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1347,6 +1350,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock increment rate */
+ eth_timesync_adjust_fine timesync_adjust_fine;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
diff --git a/lib/ethdev/ethdev_trace.h b/lib/ethdev/ethdev_trace.h
index 423e712..d613eb2 100644
--- a/lib/ethdev/ethdev_trace.h
+++ b/lib/ethdev/ethdev_trace.h
@@ -2175,6 +2175,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_fine,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t scaled_ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(scaled_ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
diff --git a/lib/ethdev/ethdev_trace_points.c b/lib/ethdev/ethdev_trace_points.c
index 91f71d8..eb539bb 100644
--- a/lib/ethdev/ethdev_trace_points.c
+++ b/lib/ethdev/ethdev_trace_points.c
@@ -406,6 +406,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_fine,
+ lib.ethdev.timesync_adjust_fine)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 0840d2b..7b75214 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -6109,6 +6109,25 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
}
int
+rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t scaled_ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_fine == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_fine)(dev,
+ scaled_ppm));
+
+ rte_eth_trace_timesync_adjust_fine(port_id, scaled_ppm, ret);
+
+ return ret;
+}
+
+int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
struct rte_eth_dev *dev;
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 3d44979..78fc07c 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -5145,6 +5145,44 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
/**
+ * Adjust the frequency of the PHC cycle counter by the indicated amount
+ * from the base frequency.
+ *
+ * This function is used to do hardware timestamp adjustment in fine
+ * granularity. It can be used in conjunction with rte_eth_timesync_adjust_time
+ * to do more precise time control.
+ *
+ * E.g, below is a simple usage:
+ * if master offset > master offset threshold
+ * do rte_eth_timesync_adjust_time;
+ * else
+ * do rte_eth_timesync_adjust_fine;
+ *
+ * The user can apply a control algorithm to leverage these two APIs, one
+ * example is in dpdk-ptpclient.
+ *
+ * This API is implemented with the below basic logic:
+ * - Determine a base frequency value
+ * - Multiply this by the abs() of the requested adjustment, then divide by
+ * the appropriate divisor (65536 billion).
+ * - Add or subtract this difference from the base frequency to calculate a
+ * new adjustment.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param scaled_ppm
+ * Desired frequency change in scaled parts per million. Scaled parts per
+ * million is ppm with a 16-bit binary fractional field.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_fine(uint16_t port_id, int64_t scaled_ppm);
+
+/**
* Read the time from the timesync clock on an Ethernet device.
*
* This is usually used in conjunction with other Ethdev timesync functions to
--
2.9.5
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2024-09-05 13:49 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-09-05 10:08 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 10:08 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-05 10:08 ` [PATCH 2/3] net/ice: add frequency adjustment support for PTP Mingjin Ye
2024-09-05 10:08 ` [PATCH 3/3] examples/ptpclient: add frequency adjustment support Mingjin Ye
2024-09-05 13:14 ` [PATCH 0/3] add frequency adjustment support for PTP Ferruh Yigit
2024-09-05 13:49 ` Bruce Richardson
-- strict thread matches above, loose matches on Subject: below --
2024-09-05 9:26 Mingjin Ye
2024-09-05 9:26 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-05 9:05 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 9:05 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2024-09-05 1:31 [PATCH 0/3] add frequency adjustment support for PTP Mingjin Ye
2024-09-05 1:31 ` [PATCH 1/3] ethdev: add frequency adjustment API Mingjin Ye
2023-08-09 5:06 [PATCH 0/3] add frequency adjustment support for PTP timesync Simei Su
2023-08-09 5:06 ` [PATCH 1/3] ethdev: add frequency adjustment API Simei Su
2023-09-18 14:50 ` Ferruh Yigit
2023-09-28 6:19 ` Su, Simei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).