From: vanshika.shukla@nxp.com
To: dev@dpdk.org, Hemant Agrawal <hemant.agrawal@nxp.com>,
Sachin Saxena <sachin.saxena@nxp.com>
Cc: Rohit Raj <rohit.raj@nxp.com>
Subject: [v1 04/43] net/dpaa2: add support to dump dpdmux counters
Date: Fri, 13 Sep 2024 11:29:20 +0530 [thread overview]
Message-ID: <20240913055959.3246917-5-vanshika.shukla@nxp.com> (raw)
In-Reply-To: <20240913055959.3246917-1-vanshika.shukla@nxp.com>
From: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add supports to dump dpdmux counters as they are required
to identify the reasons for packet drop in dpdmux.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
---
drivers/net/dpaa2/dpaa2_mux.c | 84 +++++++++++++++++++++++++++++++
drivers/net/dpaa2/rte_pmd_dpaa2.h | 18 +++++++
drivers/net/dpaa2/version.map | 1 +
3 files changed, 103 insertions(+)
diff --git a/drivers/net/dpaa2/dpaa2_mux.c b/drivers/net/dpaa2/dpaa2_mux.c
index 2ff1a98fda..d682a61e52 100644
--- a/drivers/net/dpaa2/dpaa2_mux.c
+++ b/drivers/net/dpaa2/dpaa2_mux.c
@@ -259,6 +259,90 @@ rte_pmd_dpaa2_mux_rx_frame_len(uint32_t dpdmux_id, uint16_t max_rx_frame_len)
return ret;
}
+/* dump the status of the dpaa2_mux counters on the console */
+void
+rte_pmd_dpaa2_mux_dump_counter(FILE *f, uint32_t dpdmux_id, int num_if)
+{
+ struct dpaa2_dpdmux_dev *dpdmux;
+ uint64_t counter;
+ int ret;
+ int if_id;
+
+ /* Find the DPDMUX from dpdmux_id in our list */
+ dpdmux = get_dpdmux_from_id(dpdmux_id);
+ if (!dpdmux) {
+ DPAA2_PMD_ERR("Invalid dpdmux_id: %d", dpdmux_id);
+ return;
+ }
+
+ for (if_id = 0; if_id < num_if; if_id++) {
+ fprintf(f, "dpdmux.%d\n", if_id);
+
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_FRAME, &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_FRAME %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_BYTE, &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_BYTE %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_FLTR_FRAME,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_FLTR_FRAME %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_FRAME_DISCARD,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_FRAME_DISCARD %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_MCAST_FRAME,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_MCAST_FRAME %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_MCAST_BYTE,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_MCAST_BYTE %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_BCAST_FRAME,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_BCAST_FRAME %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_ING_BCAST_BYTES,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_ING_BCAST_BYTES %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_EGR_FRAME, &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_EGR_FRAME %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_EGR_BYTE, &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_EGR_BYTE %" PRIu64 "\n",
+ counter);
+ ret = dpdmux_if_get_counter(&dpdmux->dpdmux, CMD_PRI_LOW,
+ dpdmux->token, if_id, DPDMUX_CNT_EGR_FRAME_DISCARD,
+ &counter);
+ if (!ret)
+ fprintf(f, "DPDMUX_CNT_EGR_FRAME_DISCARD %" PRIu64 "\n",
+ counter);
+ }
+}
+
static int
dpaa2_create_dpdmux_device(int vdev_fd __rte_unused,
struct vfio_device_info *obj_info __rte_unused,
diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2.h b/drivers/net/dpaa2/rte_pmd_dpaa2.h
index aea9bae905..fd9acd841b 100644
--- a/drivers/net/dpaa2/rte_pmd_dpaa2.h
+++ b/drivers/net/dpaa2/rte_pmd_dpaa2.h
@@ -33,6 +33,24 @@ rte_pmd_dpaa2_mux_flow_create(uint32_t dpdmux_id,
struct rte_flow_item *pattern[],
struct rte_flow_action *actions[]);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Dump demultiplex ethernet traffic counters
+ *
+ * @param f
+ * output stream
+ * @param dpdmux_id
+ * ID of the DPDMUX MC object.
+ * @param num_if
+ * number of interface in dpdmux object
+ *
+ */
+__rte_experimental
+void
+rte_pmd_dpaa2_mux_dump_counter(FILE *f, uint32_t dpdmux_id, int num_if);
+
/**
* @warning
* @b EXPERIMENTAL: this API may change, or be removed, without prior notice
diff --git a/drivers/net/dpaa2/version.map b/drivers/net/dpaa2/version.map
index 2d95303e27..7323fc8869 100644
--- a/drivers/net/dpaa2/version.map
+++ b/drivers/net/dpaa2/version.map
@@ -19,6 +19,7 @@ EXPERIMENTAL {
# added in 24.11
rte_pmd_dpaa2_set_one_step_ts;
rte_pmd_dpaa2_get_one_step_ts;
+ rte_pmd_dpaa2_mux_dump_counter;
};
INTERNAL {
--
2.25.1
next prev parent reply other threads:[~2024-09-13 6:00 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-13 5:59 [v1 00/43] DPAA2 specific patches vanshika.shukla
2024-09-13 5:59 ` [v1 01/43] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-09-13 5:59 ` [v1 02/43] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-09-13 5:59 ` [v1 03/43] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-09-13 5:59 ` vanshika.shukla [this message]
2024-09-13 5:59 ` [v1 05/43] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-09-13 5:59 ` [v1 06/43] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-09-13 5:59 ` [v1 07/43] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-09-13 5:59 ` [v1 08/43] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-09-13 5:59 ` [v1 09/43] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-09-13 5:59 ` [v1 10/43] net/dpaa2: update DPNI link status method vanshika.shukla
2024-09-13 5:59 ` [v1 11/43] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-09-13 5:59 ` [v1 12/43] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-09-13 5:59 ` [v1 13/43] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-09-13 5:59 ` [v1 14/43] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-09-13 5:59 ` [v1 15/43] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-09-13 5:59 ` [v1 16/43] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-09-13 5:59 ` [v1 17/43] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-09-13 5:59 ` [v1 18/43] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-09-13 5:59 ` [v1 19/43] bus/fslmc: fix coverity issue vanshika.shukla
2024-09-13 5:59 ` [v1 20/43] bus/fslmc: fix invalid error FD code vanshika.shukla
2024-09-13 5:59 ` [v1 21/43] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-09-13 5:59 ` [v1 22/43] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-09-13 5:59 ` [v1 23/43] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-09-13 5:59 ` [v1 24/43] net/dpaa2: flow API refactor vanshika.shukla
2024-09-13 5:59 ` [v1 25/43] net/dpaa2: dump Rx parser result vanshika.shukla
2024-09-13 5:59 ` [v1 26/43] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-09-13 5:59 ` [v1 27/43] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-09-13 5:59 ` [v1 28/43] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-09-13 5:59 ` [v1 29/43] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-09-13 5:59 ` [v1 30/43] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-09-13 5:59 ` [v1 31/43] net/dpaa2: add GTP flow support vanshika.shukla
2024-09-13 5:59 ` [v1 32/43] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-09-13 5:59 ` [v1 33/43] net/dpaa2: soft parser flow verification vanshika.shukla
2024-09-13 5:59 ` [v1 34/43] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-09-13 5:59 ` [v1 35/43] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-09-13 5:59 ` [v1 36/43] net/dpaa2: support software taildrop vanshika.shukla
2024-09-13 5:59 ` [v1 37/43] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-09-13 5:59 ` [v1 38/43] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-09-13 5:59 ` [v1 39/43] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-09-13 5:59 ` [v1 40/43] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-09-13 5:59 ` [v1 41/43] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-09-13 5:59 ` [v1 42/43] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-09-13 5:59 ` [v1 43/43] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
2024-09-18 7:50 ` [v2 00/43] DPAA2 specific patches vanshika.shukla
2024-09-18 7:50 ` [v2 01/43] net/dpaa2: enhance Tx scatter-gather mempool vanshika.shukla
2024-09-18 7:50 ` [v2 02/43] net/dpaa2: support PTP packet one-step timestamp vanshika.shukla
2024-09-18 7:50 ` [v2 03/43] net/dpaa2: add proper MTU debugging print vanshika.shukla
2024-09-18 7:50 ` [v2 04/43] net/dpaa2: add support to dump dpdmux counters vanshika.shukla
2024-09-18 7:50 ` [v2 05/43] bus/fslmc: change dpcon close as internal symbol vanshika.shukla
2024-09-18 7:50 ` [v2 06/43] bus/fslmc: add close API to close DPAA2 device vanshika.shukla
2024-09-18 7:50 ` [v2 07/43] net/dpaa2: dpdmux: add support for CVLAN vanshika.shukla
2024-09-18 7:50 ` [v2 08/43] bus/fslmc: upgrade with MC version 10.37 vanshika.shukla
2024-09-18 7:50 ` [v2 09/43] net/dpaa2: support link state for eth interfaces vanshika.shukla
2024-09-18 7:50 ` [v2 10/43] net/dpaa2: update DPNI link status method vanshika.shukla
2024-09-18 7:50 ` [v2 11/43] net/dpaa2: add new PMD API to check dpaa platform version vanshika.shukla
2024-09-18 7:50 ` [v2 12/43] bus/fslmc: improve BMAN buffer acquire vanshika.shukla
2024-09-18 7:50 ` [v2 13/43] bus/fslmc: get MC VFIO group FD directly vanshika.shukla
2024-09-18 7:50 ` [v2 14/43] bus/fslmc: enhance MC VFIO multiprocess support vanshika.shukla
2024-09-18 7:50 ` [v2 15/43] bus/fslmc: free VFIO group FD in case of add group failure vanshika.shukla
2024-09-18 7:50 ` [v2 16/43] bus/fslmc: dynamic IOVA mode configuration vanshika.shukla
2024-09-18 7:50 ` [v2 17/43] bus/fslmc: remove VFIO IRQ mapping vanshika.shukla
2024-09-18 7:50 ` [v2 18/43] bus/fslmc: create dpaa2 device with it's object vanshika.shukla
2024-09-18 7:50 ` [v2 19/43] bus/fslmc: fix coverity issue vanshika.shukla
2024-09-18 7:50 ` [v2 20/43] bus/fslmc: fix invalid error FD code vanshika.shukla
2024-09-18 7:50 ` [v2 21/43] bus/fslmc: change qbman eq desc from d to desc vanshika.shukla
2024-09-18 7:50 ` [v2 22/43] bus/fslmc: introduce VFIO DMA mapping API for fslmc vanshika.shukla
2024-09-18 7:50 ` [v2 23/43] net/dpaa2: change miss flow ID macro name vanshika.shukla
2024-09-18 7:50 ` [v2 24/43] net/dpaa2: flow API refactor vanshika.shukla
2024-09-18 7:50 ` [v2 25/43] net/dpaa2: dump Rx parser result vanshika.shukla
2024-09-18 7:50 ` [v2 26/43] net/dpaa2: enhancement of raw flow extract vanshika.shukla
2024-09-18 7:50 ` [v2 27/43] net/dpaa2: frame attribute flags parser vanshika.shukla
2024-09-18 7:50 ` [v2 28/43] net/dpaa2: add VXLAN distribution support vanshika.shukla
2024-09-18 7:50 ` [v2 29/43] net/dpaa2: protocol inside tunnel distribution vanshika.shukla
2024-09-18 7:50 ` [v2 30/43] net/dpaa2: eCPRI support by parser result vanshika.shukla
2024-09-18 7:50 ` [v2 31/43] net/dpaa2: add GTP flow support vanshika.shukla
2024-09-18 7:50 ` [v2 32/43] net/dpaa2: check if Soft parser is loaded vanshika.shukla
2024-09-18 7:50 ` [v2 33/43] net/dpaa2: soft parser flow verification vanshika.shukla
2024-09-18 7:50 ` [v2 34/43] net/dpaa2: add flow support for IPsec AH and ESP vanshika.shukla
2024-09-18 7:50 ` [v2 35/43] net/dpaa2: fix memory corruption in TM vanshika.shukla
2024-09-18 7:50 ` [v2 36/43] net/dpaa2: support software taildrop vanshika.shukla
2024-09-18 7:50 ` [v2 37/43] net/dpaa2: check IOVA before sending MC command vanshika.shukla
2024-09-18 7:50 ` [v2 38/43] net/dpaa2: improve DPDMUX error behavior settings vanshika.shukla
2024-09-18 7:50 ` [v2 39/43] net/dpaa2: store drop priority in mbuf vanshika.shukla
2024-09-18 7:50 ` [v2 40/43] net/dpaa2: add API to get endpoint name vanshika.shukla
2024-09-18 7:50 ` [v2 41/43] net/dpaa2: support VLAN traffic splitting vanshika.shukla
2024-09-18 7:50 ` [v2 42/43] net/dpaa2: add support for C-VLAN and MAC vanshika.shukla
2024-09-18 7:50 ` [v2 43/43] net/dpaa2: dpdmux single flow/multiple rules support vanshika.shukla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240913055959.3246917-5-vanshika.shukla@nxp.com \
--to=vanshika.shukla@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=rohit.raj@nxp.com \
--cc=sachin.saxena@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).