* [PATCH 0/1] dts: add driver binding on TG @ 2024-08-12 17:22 jspewock 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock 2024-09-19 18:16 ` [PATCH v2 0/1] dts: add driver binding on TG jspewock 0 siblings, 2 replies; 11+ messages in thread From: jspewock @ 2024-08-12 17:22 UTC (permalink / raw) To: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, juraj.linkes, paul.szczepanek, npratte, thomas, yoan.picchi, probb Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> Previously in DTS there was support for binding ports a node to different drivers on a SUT, but there was no option on the TG. Since there are likely to be some traffic generators in the future that would require different drivers to operate properly, this support is something that would likely be useful to have, and it very simple to add. All that is done in this patch is moving functionality for copying the DPDK tarball onto a host out of the SUT node and into the generic Node class so that both the TG and the SUT can take advantage of DPDK tools. It should be noted however that the TG node still does not build DPDK as it likely wouldn't need the compiled binaries. Jeremy Spewock (1): dts: add binding to different drivers to TG node dts/framework/runner.py | 2 + dts/framework/testbed_model/node.py | 106 +++++++++++++++++++++++- dts/framework/testbed_model/sut_node.py | 86 +------------------ 3 files changed, 109 insertions(+), 85 deletions(-) -- 2.45.2 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/1] dts: add binding to different drivers to TG node 2024-08-12 17:22 [PATCH 0/1] dts: add driver binding on TG jspewock @ 2024-08-12 17:22 ` jspewock 2024-08-12 17:49 ` Nicholas Pratte ` (2 more replies) 2024-09-19 18:16 ` [PATCH v2 0/1] dts: add driver binding on TG jspewock 1 sibling, 3 replies; 11+ messages in thread From: jspewock @ 2024-08-12 17:22 UTC (permalink / raw) To: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, juraj.linkes, paul.szczepanek, npratte, thomas, yoan.picchi, probb Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> The DTS framework in its current state supports binding ports to different drivers on the SUT node but not the TG node. The TG node already has the information that it needs about the different drivers that it has available in the configuration file, but it did not previously have access to the devbind script, so it did not use that information for anything. This patch moves the steps to copy the DPDK tarball into the node class rather than the SUT node class, and calls this function on the TG node as well as the SUT. It also moves the driver binding step into the Node class and triggers the same pattern of binding to ports that existed on the SUT on the TG. Bugzilla ID: 1420 Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> --- dts/framework/runner.py | 2 + dts/framework/testbed_model/node.py | 106 +++++++++++++++++++++++- dts/framework/testbed_model/sut_node.py | 86 +------------------ 3 files changed, 109 insertions(+), 85 deletions(-) diff --git a/dts/framework/runner.py b/dts/framework/runner.py index 6b6f6a05f5..ed9e58b172 100644 --- a/dts/framework/runner.py +++ b/dts/framework/runner.py @@ -484,6 +484,7 @@ def _run_build_target( try: sut_node.set_up_build_target(build_target_config) + tg_node.set_up_build_target(build_target_config) self._result.dpdk_version = sut_node.dpdk_version build_target_result.add_build_target_info(sut_node.get_build_target_info()) build_target_result.update_setup(Result.PASS) @@ -498,6 +499,7 @@ def _run_build_target( try: self._logger.set_stage(DtsStage.build_target_teardown) sut_node.tear_down_build_target() + tg_node.tear_down_build_target() build_target_result.update_teardown(Result.PASS) except Exception as e: self._logger.exception("Build target teardown failed.") diff --git a/dts/framework/testbed_model/node.py b/dts/framework/testbed_model/node.py index 12a40170ac..8e6181e424 100644 --- a/dts/framework/testbed_model/node.py +++ b/dts/framework/testbed_model/node.py @@ -13,11 +13,19 @@ The :func:`~Node.skip_setup` decorator can be used without subclassing. """ +import os +import tarfile from abc import ABC from ipaddress import IPv4Interface, IPv6Interface +from pathlib import PurePath from typing import Any, Callable, Union -from framework.config import OS, NodeConfiguration, TestRunConfiguration +from framework.config import ( + OS, + BuildTargetConfiguration, + NodeConfiguration, + TestRunConfiguration, +) from framework.exception import ConfigurationError from framework.logger import DTSLogger, get_dts_logger from framework.settings import SETTINGS @@ -58,8 +66,11 @@ class Node(ABC): lcores: list[LogicalCore] ports: list[Port] _logger: DTSLogger + _remote_tmp_dir: PurePath + __remote_dpdk_dir: PurePath | None _other_sessions: list[OSSession] _test_run_config: TestRunConfiguration + _path_to_devbind_script: PurePath | None def __init__(self, node_config: NodeConfiguration): """Connect to the node and gather info during initialization. @@ -88,6 +99,9 @@ def __init__(self, node_config: NodeConfiguration): self._other_sessions = [] self._init_ports() + self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() + self.__remote_dpdk_dir = None + self._path_to_devbind_script = None def _init_ports(self) -> None: self.ports = [Port(self.name, port_config) for port_config in self.config.ports] @@ -95,6 +109,34 @@ def _init_ports(self) -> None: for port in self.ports: self.configure_port_state(port) + def _guess_dpdk_remote_dir(self) -> PurePath: + return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) + + @property + def _remote_dpdk_dir(self) -> PurePath: + """The remote DPDK dir. + + This internal property should be set after extracting the DPDK tarball. If it's not set, + that implies the DPDK setup step has been skipped, in which case we can guess where + a previous build was located. + """ + if self.__remote_dpdk_dir is None: + self.__remote_dpdk_dir = self._guess_dpdk_remote_dir() + return self.__remote_dpdk_dir + + @_remote_dpdk_dir.setter + def _remote_dpdk_dir(self, value: PurePath) -> None: + self.__remote_dpdk_dir = value + + @property + def path_to_devbind_script(self) -> PurePath: + """The path to the dpdk-devbind.py script on the node.""" + if self._path_to_devbind_script is None: + self._path_to_devbind_script = self.main_session.join_remote_path( + self._remote_dpdk_dir, "usertools", "dpdk-devbind.py" + ) + return self._path_to_devbind_script + def set_up_test_run(self, test_run_config: TestRunConfiguration) -> None: """Test run setup steps. @@ -114,6 +156,24 @@ def tear_down_test_run(self) -> None: Additional steps can be added by extending the method in subclasses with the use of super(). """ + def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None: + """Set up DPDK the node and bind ports. + + DPDK setup includes setting all internals needed for the build, the copying of DPDK tarball + and then building DPDK. The drivers are bound to those that DPDK needs. + + Args: + build_target_config: The build target test run configuration according to which + the setup steps will be taken. + """ + self._copy_dpdk_tarball() + self.bind_ports_to_driver() + + def tear_down_build_target(self) -> None: + """Reset DPDK variables and bind port driver to the OS driver.""" + self.__remote_dpdk_dir = None + self.bind_ports_to_driver(for_dpdk=False) + def create_session(self, name: str) -> OSSession: """Create and return a new OS-aware remote session. @@ -228,6 +288,50 @@ def skip_setup(func: Callable[..., Any]) -> Callable[..., Any]: else: return func + @skip_setup + def _copy_dpdk_tarball(self) -> None: + """Copy to and extract DPDK tarball on the node.""" + self._logger.info(f"Copying DPDK tarball to {self.name}.") + self.main_session.copy_to(SETTINGS.dpdk_tarball_path, self._remote_tmp_dir) + + # construct remote tarball path + # the basename is the same on local host and on remote Node + remote_tarball_path = self.main_session.join_remote_path( + self._remote_tmp_dir, os.path.basename(SETTINGS.dpdk_tarball_path) + ) + + # construct remote path after extracting + with tarfile.open(SETTINGS.dpdk_tarball_path) as dpdk_tar: + dpdk_top_dir = dpdk_tar.getnames()[0] + self._remote_dpdk_dir = self.main_session.join_remote_path( + self._remote_tmp_dir, dpdk_top_dir + ) + + self._logger.info( + f"Extracting DPDK tarball on {self.name}: " + f"'{remote_tarball_path}' into '{self._remote_dpdk_dir}'." + ) + # clean remote path where we're extracting + self.main_session.remove_remote_dir(self._remote_dpdk_dir) + + # then extract to remote path + self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir) + + def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: + """Bind all ports on the node to a driver. + + Args: + for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. + If :data:`False`, binds to os_driver. + """ + for port in self.ports: + driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver + self.main_session.send_command( + f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", + privileged=True, + verify=True, + ) + def create_session(node_config: NodeConfiguration, name: str, logger: DTSLogger) -> OSSession: """Factory for OS-aware sessions. diff --git a/dts/framework/testbed_model/sut_node.py b/dts/framework/testbed_model/sut_node.py index 2855fe0276..f3fd4e2304 100644 --- a/dts/framework/testbed_model/sut_node.py +++ b/dts/framework/testbed_model/sut_node.py @@ -13,7 +13,6 @@ import os -import tarfile import time from pathlib import PurePath @@ -26,7 +25,6 @@ ) from framework.params.eal import EalParams from framework.remote_session.remote_session import CommandResult -from framework.settings import SETTINGS from framework.utils import MesonArgs from .node import Node @@ -59,14 +57,11 @@ class SutNode(Node): dpdk_timestamp: str _build_target_config: BuildTargetConfiguration | None _env_vars: dict - _remote_tmp_dir: PurePath - __remote_dpdk_dir: PurePath | None _app_compile_timeout: float _dpdk_kill_session: OSSession | None _dpdk_version: str | None _node_info: NodeInfo | None _compiler_version: str | None - _path_to_devbind_script: PurePath | None def __init__(self, node_config: SutNodeConfiguration): """Extend the constructor with SUT node specifics. @@ -79,8 +74,6 @@ def __init__(self, node_config: SutNodeConfiguration): self.dpdk_prefix_list = [] self._build_target_config = None self._env_vars = {} - self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() - self.__remote_dpdk_dir = None self._app_compile_timeout = 90 self._dpdk_kill_session = None self.dpdk_timestamp = ( @@ -89,25 +82,8 @@ def __init__(self, node_config: SutNodeConfiguration): self._dpdk_version = None self._node_info = None self._compiler_version = None - self._path_to_devbind_script = None self._logger.info(f"Created node: {self.name}") - @property - def _remote_dpdk_dir(self) -> PurePath: - """The remote DPDK dir. - - This internal property should be set after extracting the DPDK tarball. If it's not set, - that implies the DPDK setup step has been skipped, in which case we can guess where - a previous build was located. - """ - if self.__remote_dpdk_dir is None: - self.__remote_dpdk_dir = self._guess_dpdk_remote_dir() - return self.__remote_dpdk_dir - - @_remote_dpdk_dir.setter - def _remote_dpdk_dir(self, value: PurePath) -> None: - self.__remote_dpdk_dir = value - @property def remote_dpdk_build_dir(self) -> PurePath: """The remote DPDK build directory. @@ -151,15 +127,6 @@ def compiler_version(self) -> str: return "" return self._compiler_version - @property - def path_to_devbind_script(self) -> PurePath: - """The path to the dpdk-devbind.py script on the node.""" - if self._path_to_devbind_script is None: - self._path_to_devbind_script = self.main_session.join_remote_path( - self._remote_dpdk_dir, "usertools", "dpdk-devbind.py" - ) - return self._path_to_devbind_script - def get_build_target_info(self) -> BuildTargetInfo: """Get additional build target information. @@ -170,9 +137,6 @@ def get_build_target_info(self) -> BuildTargetInfo: dpdk_version=self.dpdk_version, compiler_version=self.compiler_version ) - def _guess_dpdk_remote_dir(self) -> PurePath: - return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) - def set_up_test_run(self, test_run_config: TestRunConfiguration) -> None: """Extend the test run setup with vdev config. @@ -199,19 +163,17 @@ def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> build_target_config: The build target test run configuration according to which the setup steps will be taken. """ + super().set_up_build_target(build_target_config) self._configure_build_target(build_target_config) - self._copy_dpdk_tarball() self._build_dpdk() - self.bind_ports_to_driver() def tear_down_build_target(self) -> None: """Reset DPDK variables and bind port driver to the OS driver.""" + super().tear_down_build_target() self._env_vars = {} self._build_target_config = None - self.__remote_dpdk_dir = None self._dpdk_version = None self._compiler_version = None - self.bind_ports_to_driver(for_dpdk=False) def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None: """Populate common environment variables and set build target config.""" @@ -224,35 +186,6 @@ def _configure_build_target(self, build_target_config: BuildTargetConfiguration) f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'" ) # fmt: skip - @Node.skip_setup - def _copy_dpdk_tarball(self) -> None: - """Copy to and extract DPDK tarball on the SUT node.""" - self._logger.info("Copying DPDK tarball to SUT.") - self.main_session.copy_to(SETTINGS.dpdk_tarball_path, self._remote_tmp_dir) - - # construct remote tarball path - # the basename is the same on local host and on remote Node - remote_tarball_path = self.main_session.join_remote_path( - self._remote_tmp_dir, os.path.basename(SETTINGS.dpdk_tarball_path) - ) - - # construct remote path after extracting - with tarfile.open(SETTINGS.dpdk_tarball_path) as dpdk_tar: - dpdk_top_dir = dpdk_tar.getnames()[0] - self._remote_dpdk_dir = self.main_session.join_remote_path( - self._remote_tmp_dir, dpdk_top_dir - ) - - self._logger.info( - f"Extracting DPDK tarball on SUT: " - f"'{remote_tarball_path}' into '{self._remote_dpdk_dir}'." - ) - # clean remote path where we're extracting - self.main_session.remove_remote_dir(self._remote_dpdk_dir) - - # then extract to remote path - self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir) - @Node.skip_setup def _build_dpdk(self) -> None: """Build DPDK. @@ -335,18 +268,3 @@ def configure_ipv4_forwarding(self, enable: bool) -> None: enable: If :data:`True`, enable the forwarding, otherwise disable it. """ self.main_session.configure_ipv4_forwarding(enable) - - def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: - """Bind all ports on the SUT to a driver. - - Args: - for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. - If :data:`False`, binds to os_driver. - """ - for port in self.ports: - driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver - self.main_session.send_command( - f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", - privileged=True, - verify=True, - ) -- 2.45.2 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock @ 2024-08-12 17:49 ` Nicholas Pratte 2024-09-09 12:16 ` Juraj Linkeš 2024-09-12 13:00 ` Patrick Robb 2 siblings, 0 replies; 11+ messages in thread From: Nicholas Pratte @ 2024-08-12 17:49 UTC (permalink / raw) To: jspewock Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, juraj.linkes, paul.szczepanek, thomas, yoan.picchi, probb, dev Makes sense to me! Reviewed-by: Nicholas Pratte <npratte@iol.unh.edu> On Mon, Aug 12, 2024 at 1:23 PM <jspewock@iol.unh.edu> wrote: > > From: Jeremy Spewock <jspewock@iol.unh.edu> > > The DTS framework in its current state supports binding ports to > different drivers on the SUT node but not the TG node. The TG node > already has the information that it needs about the different drivers > that it has available in the configuration file, but it did not > previously have access to the devbind script, so it did not use that > information for anything. > > This patch moves the steps to copy the DPDK tarball into the node class > rather than the SUT node class, and calls this function on the TG node > as well as the SUT. It also moves the driver binding step into the Node > class and triggers the same pattern of binding to ports that existed on > the SUT on the TG. > > Bugzilla ID: 1420 > > Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> > --- > dts/framework/runner.py | 2 + > dts/framework/testbed_model/node.py | 106 +++++++++++++++++++++++- > dts/framework/testbed_model/sut_node.py | 86 +------------------ > 3 files changed, 109 insertions(+), 85 deletions(-) > > diff --git a/dts/framework/runner.py b/dts/framework/runner.py > index 6b6f6a05f5..ed9e58b172 100644 > --- a/dts/framework/runner.py > +++ b/dts/framework/runner.py > @@ -484,6 +484,7 @@ def _run_build_target( > > try: > sut_node.set_up_build_target(build_target_config) > + tg_node.set_up_build_target(build_target_config) > self._result.dpdk_version = sut_node.dpdk_version > build_target_result.add_build_target_info(sut_node.get_build_target_info()) > build_target_result.update_setup(Result.PASS) > @@ -498,6 +499,7 @@ def _run_build_target( > try: > self._logger.set_stage(DtsStage.build_target_teardown) > sut_node.tear_down_build_target() > + tg_node.tear_down_build_target() > build_target_result.update_teardown(Result.PASS) > except Exception as e: > self._logger.exception("Build target teardown failed.") > diff --git a/dts/framework/testbed_model/node.py b/dts/framework/testbed_model/node.py > index 12a40170ac..8e6181e424 100644 > --- a/dts/framework/testbed_model/node.py > +++ b/dts/framework/testbed_model/node.py > @@ -13,11 +13,19 @@ > The :func:`~Node.skip_setup` decorator can be used without subclassing. > """ > > +import os > +import tarfile > from abc import ABC > from ipaddress import IPv4Interface, IPv6Interface > +from pathlib import PurePath > from typing import Any, Callable, Union > > -from framework.config import OS, NodeConfiguration, TestRunConfiguration > +from framework.config import ( > + OS, > + BuildTargetConfiguration, > + NodeConfiguration, > + TestRunConfiguration, > +) > from framework.exception import ConfigurationError > from framework.logger import DTSLogger, get_dts_logger > from framework.settings import SETTINGS > @@ -58,8 +66,11 @@ class Node(ABC): > lcores: list[LogicalCore] > ports: list[Port] > _logger: DTSLogger > + _remote_tmp_dir: PurePath > + __remote_dpdk_dir: PurePath | None > _other_sessions: list[OSSession] > _test_run_config: TestRunConfiguration > + _path_to_devbind_script: PurePath | None > > def __init__(self, node_config: NodeConfiguration): > """Connect to the node and gather info during initialization. > @@ -88,6 +99,9 @@ def __init__(self, node_config: NodeConfiguration): > > self._other_sessions = [] > self._init_ports() > + self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() > + self.__remote_dpdk_dir = None > + self._path_to_devbind_script = None > > def _init_ports(self) -> None: > self.ports = [Port(self.name, port_config) for port_config in self.config.ports] > @@ -95,6 +109,34 @@ def _init_ports(self) -> None: > for port in self.ports: > self.configure_port_state(port) > > + def _guess_dpdk_remote_dir(self) -> PurePath: > + return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) > + > + @property > + def _remote_dpdk_dir(self) -> PurePath: > + """The remote DPDK dir. > + > + This internal property should be set after extracting the DPDK tarball. If it's not set, > + that implies the DPDK setup step has been skipped, in which case we can guess where > + a previous build was located. > + """ > + if self.__remote_dpdk_dir is None: > + self.__remote_dpdk_dir = self._guess_dpdk_remote_dir() > + return self.__remote_dpdk_dir > + > + @_remote_dpdk_dir.setter > + def _remote_dpdk_dir(self, value: PurePath) -> None: > + self.__remote_dpdk_dir = value > + > + @property > + def path_to_devbind_script(self) -> PurePath: > + """The path to the dpdk-devbind.py script on the node.""" > + if self._path_to_devbind_script is None: > + self._path_to_devbind_script = self.main_session.join_remote_path( > + self._remote_dpdk_dir, "usertools", "dpdk-devbind.py" > + ) > + return self._path_to_devbind_script > + > def set_up_test_run(self, test_run_config: TestRunConfiguration) -> None: > """Test run setup steps. > > @@ -114,6 +156,24 @@ def tear_down_test_run(self) -> None: > Additional steps can be added by extending the method in subclasses with the use of super(). > """ > > + def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None: > + """Set up DPDK the node and bind ports. > + > + DPDK setup includes setting all internals needed for the build, the copying of DPDK tarball > + and then building DPDK. The drivers are bound to those that DPDK needs. > + > + Args: > + build_target_config: The build target test run configuration according to which > + the setup steps will be taken. > + """ > + self._copy_dpdk_tarball() > + self.bind_ports_to_driver() > + > + def tear_down_build_target(self) -> None: > + """Reset DPDK variables and bind port driver to the OS driver.""" > + self.__remote_dpdk_dir = None > + self.bind_ports_to_driver(for_dpdk=False) > + > def create_session(self, name: str) -> OSSession: > """Create and return a new OS-aware remote session. > > @@ -228,6 +288,50 @@ def skip_setup(func: Callable[..., Any]) -> Callable[..., Any]: > else: > return func > > + @skip_setup > + def _copy_dpdk_tarball(self) -> None: > + """Copy to and extract DPDK tarball on the node.""" > + self._logger.info(f"Copying DPDK tarball to {self.name}.") > + self.main_session.copy_to(SETTINGS.dpdk_tarball_path, self._remote_tmp_dir) > + > + # construct remote tarball path > + # the basename is the same on local host and on remote Node > + remote_tarball_path = self.main_session.join_remote_path( > + self._remote_tmp_dir, os.path.basename(SETTINGS.dpdk_tarball_path) > + ) > + > + # construct remote path after extracting > + with tarfile.open(SETTINGS.dpdk_tarball_path) as dpdk_tar: > + dpdk_top_dir = dpdk_tar.getnames()[0] > + self._remote_dpdk_dir = self.main_session.join_remote_path( > + self._remote_tmp_dir, dpdk_top_dir > + ) > + > + self._logger.info( > + f"Extracting DPDK tarball on {self.name}: " > + f"'{remote_tarball_path}' into '{self._remote_dpdk_dir}'." > + ) > + # clean remote path where we're extracting > + self.main_session.remove_remote_dir(self._remote_dpdk_dir) > + > + # then extract to remote path > + self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir) > + > + def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: > + """Bind all ports on the node to a driver. > + > + Args: > + for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. > + If :data:`False`, binds to os_driver. > + """ > + for port in self.ports: > + driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver > + self.main_session.send_command( > + f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", > + privileged=True, > + verify=True, > + ) > + > > def create_session(node_config: NodeConfiguration, name: str, logger: DTSLogger) -> OSSession: > """Factory for OS-aware sessions. > diff --git a/dts/framework/testbed_model/sut_node.py b/dts/framework/testbed_model/sut_node.py > index 2855fe0276..f3fd4e2304 100644 > --- a/dts/framework/testbed_model/sut_node.py > +++ b/dts/framework/testbed_model/sut_node.py > @@ -13,7 +13,6 @@ > > > import os > -import tarfile > import time > from pathlib import PurePath > > @@ -26,7 +25,6 @@ > ) > from framework.params.eal import EalParams > from framework.remote_session.remote_session import CommandResult > -from framework.settings import SETTINGS > from framework.utils import MesonArgs > > from .node import Node > @@ -59,14 +57,11 @@ class SutNode(Node): > dpdk_timestamp: str > _build_target_config: BuildTargetConfiguration | None > _env_vars: dict > - _remote_tmp_dir: PurePath > - __remote_dpdk_dir: PurePath | None > _app_compile_timeout: float > _dpdk_kill_session: OSSession | None > _dpdk_version: str | None > _node_info: NodeInfo | None > _compiler_version: str | None > - _path_to_devbind_script: PurePath | None > > def __init__(self, node_config: SutNodeConfiguration): > """Extend the constructor with SUT node specifics. > @@ -79,8 +74,6 @@ def __init__(self, node_config: SutNodeConfiguration): > self.dpdk_prefix_list = [] > self._build_target_config = None > self._env_vars = {} > - self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() > - self.__remote_dpdk_dir = None > self._app_compile_timeout = 90 > self._dpdk_kill_session = None > self.dpdk_timestamp = ( > @@ -89,25 +82,8 @@ def __init__(self, node_config: SutNodeConfiguration): > self._dpdk_version = None > self._node_info = None > self._compiler_version = None > - self._path_to_devbind_script = None > self._logger.info(f"Created node: {self.name}") > > - @property > - def _remote_dpdk_dir(self) -> PurePath: > - """The remote DPDK dir. > - > - This internal property should be set after extracting the DPDK tarball. If it's not set, > - that implies the DPDK setup step has been skipped, in which case we can guess where > - a previous build was located. > - """ > - if self.__remote_dpdk_dir is None: > - self.__remote_dpdk_dir = self._guess_dpdk_remote_dir() > - return self.__remote_dpdk_dir > - > - @_remote_dpdk_dir.setter > - def _remote_dpdk_dir(self, value: PurePath) -> None: > - self.__remote_dpdk_dir = value > - > @property > def remote_dpdk_build_dir(self) -> PurePath: > """The remote DPDK build directory. > @@ -151,15 +127,6 @@ def compiler_version(self) -> str: > return "" > return self._compiler_version > > - @property > - def path_to_devbind_script(self) -> PurePath: > - """The path to the dpdk-devbind.py script on the node.""" > - if self._path_to_devbind_script is None: > - self._path_to_devbind_script = self.main_session.join_remote_path( > - self._remote_dpdk_dir, "usertools", "dpdk-devbind.py" > - ) > - return self._path_to_devbind_script > - > def get_build_target_info(self) -> BuildTargetInfo: > """Get additional build target information. > > @@ -170,9 +137,6 @@ def get_build_target_info(self) -> BuildTargetInfo: > dpdk_version=self.dpdk_version, compiler_version=self.compiler_version > ) > > - def _guess_dpdk_remote_dir(self) -> PurePath: > - return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) > - > def set_up_test_run(self, test_run_config: TestRunConfiguration) -> None: > """Extend the test run setup with vdev config. > > @@ -199,19 +163,17 @@ def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> > build_target_config: The build target test run configuration according to which > the setup steps will be taken. > """ > + super().set_up_build_target(build_target_config) > self._configure_build_target(build_target_config) > - self._copy_dpdk_tarball() > self._build_dpdk() > - self.bind_ports_to_driver() > > def tear_down_build_target(self) -> None: > """Reset DPDK variables and bind port driver to the OS driver.""" > + super().tear_down_build_target() > self._env_vars = {} > self._build_target_config = None > - self.__remote_dpdk_dir = None > self._dpdk_version = None > self._compiler_version = None > - self.bind_ports_to_driver(for_dpdk=False) > > def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None: > """Populate common environment variables and set build target config.""" > @@ -224,35 +186,6 @@ def _configure_build_target(self, build_target_config: BuildTargetConfiguration) > f"'{build_target_config.compiler_wrapper} {build_target_config.compiler.name}'" > ) # fmt: skip > > - @Node.skip_setup > - def _copy_dpdk_tarball(self) -> None: > - """Copy to and extract DPDK tarball on the SUT node.""" > - self._logger.info("Copying DPDK tarball to SUT.") > - self.main_session.copy_to(SETTINGS.dpdk_tarball_path, self._remote_tmp_dir) > - > - # construct remote tarball path > - # the basename is the same on local host and on remote Node > - remote_tarball_path = self.main_session.join_remote_path( > - self._remote_tmp_dir, os.path.basename(SETTINGS.dpdk_tarball_path) > - ) > - > - # construct remote path after extracting > - with tarfile.open(SETTINGS.dpdk_tarball_path) as dpdk_tar: > - dpdk_top_dir = dpdk_tar.getnames()[0] > - self._remote_dpdk_dir = self.main_session.join_remote_path( > - self._remote_tmp_dir, dpdk_top_dir > - ) > - > - self._logger.info( > - f"Extracting DPDK tarball on SUT: " > - f"'{remote_tarball_path}' into '{self._remote_dpdk_dir}'." > - ) > - # clean remote path where we're extracting > - self.main_session.remove_remote_dir(self._remote_dpdk_dir) > - > - # then extract to remote path > - self.main_session.extract_remote_tarball(remote_tarball_path, self._remote_dpdk_dir) > - > @Node.skip_setup > def _build_dpdk(self) -> None: > """Build DPDK. > @@ -335,18 +268,3 @@ def configure_ipv4_forwarding(self, enable: bool) -> None: > enable: If :data:`True`, enable the forwarding, otherwise disable it. > """ > self.main_session.configure_ipv4_forwarding(enable) > - > - def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: > - """Bind all ports on the SUT to a driver. > - > - Args: > - for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. > - If :data:`False`, binds to os_driver. > - """ > - for port in self.ports: > - driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver > - self.main_session.send_command( > - f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", > - privileged=True, > - verify=True, > - ) > -- > 2.45.2 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock 2024-08-12 17:49 ` Nicholas Pratte @ 2024-09-09 12:16 ` Juraj Linkeš 2024-09-09 15:55 ` Jeremy Spewock 2024-09-12 13:00 ` Patrick Robb 2 siblings, 1 reply; 11+ messages in thread From: Juraj Linkeš @ 2024-09-09 12:16 UTC (permalink / raw) To: jspewock, alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, paul.szczepanek, npratte, thomas, yoan.picchi, probb Cc: dev On 12. 8. 2024 19:22, jspewock@iol.unh.edu wrote: > From: Jeremy Spewock <jspewock@iol.unh.edu> > > The DTS framework in its current state supports binding ports to > different drivers on the SUT node but not the TG node. The TG node > already has the information that it needs about the different drivers > that it has available in the configuration file, but it did not > previously have access to the devbind script, so it did not use that > information for anything. > > This patch moves the steps to copy the DPDK tarball into the node class > rather than the SUT node class, and calls this function on the TG node > as well as the SUT. It also moves the driver binding step into the Node > class and triggers the same pattern of binding to ports that existed on > the SUT on the TG. > This is a very inefficient way to do this. We'll have to build DPDK twice and that's very time consuming. I was thinking in terms of just copying the script to the TG node and storing its location on the TG node. We should have access to the script whether DTS is run from the repository or a tarball. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-09-09 12:16 ` Juraj Linkeš @ 2024-09-09 15:55 ` Jeremy Spewock 2024-09-16 10:04 ` Juraj Linkeš 0 siblings, 1 reply; 11+ messages in thread From: Jeremy Spewock @ 2024-09-09 15:55 UTC (permalink / raw) To: Juraj Linkeš Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, paul.szczepanek, npratte, thomas, yoan.picchi, probb, dev On Mon, Sep 9, 2024 at 8:16 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: > > > > On 12. 8. 2024 19:22, jspewock@iol.unh.edu wrote: > > From: Jeremy Spewock <jspewock@iol.unh.edu> > > > > The DTS framework in its current state supports binding ports to > > different drivers on the SUT node but not the TG node. The TG node > > already has the information that it needs about the different drivers > > that it has available in the configuration file, but it did not > > previously have access to the devbind script, so it did not use that > > information for anything. > > > > This patch moves the steps to copy the DPDK tarball into the node class > > rather than the SUT node class, and calls this function on the TG node > > as well as the SUT. It also moves the driver binding step into the Node > > class and triggers the same pattern of binding to ports that existed on > > the SUT on the TG. > > > > This is a very inefficient way to do this. We'll have to build DPDK > twice and that's very time consuming. I was thinking in terms of just This patch shouldn't be compiling DPDK twice, are you referring to the process of copying the tarball over and extracting it taking too long? If so, that makes sense that it takes longer than we need for this one task. I figured it wouldn't hurt to have the whole DPDK directory there, and that it could even be potentially useful to have it if the TG ever needed it. That and it seemed like the most straightforward way that kept these two set up in a similar way. Extracting the tarball is obviously pretty quick, so I guess the real question here is whether it is fine to add the time of one extra SCP of the DPDK tarball around. > copying the script to the TG node and storing its location on the TG > node. We should have access to the script whether DTS is run from the > repository or a tarball. We should have access to it regardless, but extracting only that one script would be different based on if it was a tarball or a repository since, I believe at least, I would have to use the tarfile library to read and extract only this one file to copy over if it was a tarball. It would be faster I assume, so if you think it is worth it I could make the change. Unless you are saying that we wouldn't need to take the devbind script from the tarball that is passed into the DTS run and instead assume that we can just go one directory up from `dts/` on the runner host. That could be an interesting idea which would be faster, but I wasn't sure if that was something that was fine to do since (I don't think at least) there is anything that technically ties you to running from in a DPDK directory other than the docker container. > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-09-09 15:55 ` Jeremy Spewock @ 2024-09-16 10:04 ` Juraj Linkeš 2024-09-18 18:50 ` Jeremy Spewock 0 siblings, 1 reply; 11+ messages in thread From: Juraj Linkeš @ 2024-09-16 10:04 UTC (permalink / raw) To: Jeremy Spewock Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, paul.szczepanek, npratte, thomas, yoan.picchi, probb, dev On 9. 9. 2024 17:55, Jeremy Spewock wrote: > On Mon, Sep 9, 2024 at 8:16 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: >> >> >> >> On 12. 8. 2024 19:22, jspewock@iol.unh.edu wrote: >>> From: Jeremy Spewock <jspewock@iol.unh.edu> >>> >>> The DTS framework in its current state supports binding ports to >>> different drivers on the SUT node but not the TG node. The TG node >>> already has the information that it needs about the different drivers >>> that it has available in the configuration file, but it did not >>> previously have access to the devbind script, so it did not use that >>> information for anything. >>> >>> This patch moves the steps to copy the DPDK tarball into the node class >>> rather than the SUT node class, and calls this function on the TG node >>> as well as the SUT. It also moves the driver binding step into the Node >>> class and triggers the same pattern of binding to ports that existed on >>> the SUT on the TG. >>> >> >> This is a very inefficient way to do this. We'll have to build DPDK >> twice and that's very time consuming. I was thinking in terms of just > > This patch shouldn't be compiling DPDK twice, are you referring to the > process of copying the tarball over and extracting it taking too long? > If so, that makes sense that it takes longer than we need for this one > task. I figured it wouldn't hurt to have the whole DPDK directory > there, and that it could even be potentially useful to have it if the > TG ever needed it. That and it seemed like the most straightforward > way that kept these two set up in a similar way. Extracting the > tarball is obviously pretty quick, so I guess the real question here > is whether it is fine to add the time of one extra SCP of the DPDK > tarball around. > Ah, I didn't look carefully at the split. This is fine, but there some things I noticed. As Patrick mentioned, the docstrings in Node.set_up_build_target() and SutNode.set_up_build_target() would need to be updated. Why are we binding ports on the TG node? This shouldn't really be part of set_up_build_target; set_up_test_run is a better place to put this, as we don't need to copy it for each build target. And, as I realized then thinking about the property (down below), we don't need to do that even per test_run; once per TG node's lifetime is enough. >> copying the script to the TG node and storing its location on the TG >> node. We should have access to the script whether DTS is run from the >> repository or a tarball. > > We should have access to it regardless, but extracting only that one > script would be different based on if it was a tarball or a repository > since, I believe at least, I would have to use the tarfile library to > read and extract only this one file to copy over if it was a tarball. > It would be faster I assume, so if you think it is worth it I could > make the change. Unless you are saying that we wouldn't need to take > the devbind script from the tarball that is passed into the DTS run > and instead assume that we can just go one directory up from `dts/` on > the runner host. That could be an interesting idea which would be > faster, but I wasn't sure if that was something that was fine to do > since (I don't think at least) there is anything that technically ties > you to running from in a DPDK directory other than the docker > container. You can run DTS from any directory, but currently DTS it's always going to be in a DPDK tree (there's no other way to get DTS), so I think it's safe to assume the script is there. We can put a variable pointing to dpdk_root into utils.py and use that. My idea was copying that one file, nothing else (no tarball or anything would be needed). I think we'd only need to move _remote_tmp_dir and _path_to_devbind_script to Node and then implement set_up_test_run() on the TG node to copy just the script (with self.main_session.copy_to()) and set _path_to_devbind_script. And I guess set _path_to_devbind_script in SutNode.tear_down_build_target() and TGNode.tear_down_test_run() since those seems to be missing. But there's actually one more thing we could improve on top of that. _path_to_devbind_script could be a property which would be used the same way in SutNode, but in TGNode, we could copy the script only if it's None and set it back to None only when closing the Node (as we need to copy the script only once per TG node lifespan). ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-09-16 10:04 ` Juraj Linkeš @ 2024-09-18 18:50 ` Jeremy Spewock 2024-09-19 9:10 ` Juraj Linkeš 0 siblings, 1 reply; 11+ messages in thread From: Jeremy Spewock @ 2024-09-18 18:50 UTC (permalink / raw) To: Juraj Linkeš Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, paul.szczepanek, npratte, thomas, yoan.picchi, probb, dev On Mon, Sep 16, 2024 at 6:04 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: > > > > On 9. 9. 2024 17:55, Jeremy Spewock wrote: > > On Mon, Sep 9, 2024 at 8:16 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: > >> > >> > >> > >> On 12. 8. 2024 19:22, jspewock@iol.unh.edu wrote: > >>> From: Jeremy Spewock <jspewock@iol.unh.edu> > >>> > >>> The DTS framework in its current state supports binding ports to > >>> different drivers on the SUT node but not the TG node. The TG node > >>> already has the information that it needs about the different drivers > >>> that it has available in the configuration file, but it did not > >>> previously have access to the devbind script, so it did not use that > >>> information for anything. > >>> > >>> This patch moves the steps to copy the DPDK tarball into the node class > >>> rather than the SUT node class, and calls this function on the TG node > >>> as well as the SUT. It also moves the driver binding step into the Node > >>> class and triggers the same pattern of binding to ports that existed on > >>> the SUT on the TG. > >>> > >> > >> This is a very inefficient way to do this. We'll have to build DPDK > >> twice and that's very time consuming. I was thinking in terms of just > > > > This patch shouldn't be compiling DPDK twice, are you referring to the > > process of copying the tarball over and extracting it taking too long? > > If so, that makes sense that it takes longer than we need for this one > > task. I figured it wouldn't hurt to have the whole DPDK directory > > there, and that it could even be potentially useful to have it if the > > TG ever needed it. That and it seemed like the most straightforward > > way that kept these two set up in a similar way. Extracting the > > tarball is obviously pretty quick, so I guess the real question here > > is whether it is fine to add the time of one extra SCP of the DPDK > > tarball around. > > > > Ah, I didn't look carefully at the split. This is fine, but there some > things I noticed. > > As Patrick mentioned, the docstrings in Node.set_up_build_target() and > SutNode.set_up_build_target() would need to be updated. > Why are we binding ports on the TG node? I figured that the assumption would be that whatever is in the config file is what the TG needs to be bound to in order to run the testing, similarly to how we always bind on the SUT assuming that we need to be using the DPDK driver to test DPDK. > This shouldn't really be part of set_up_build_target; set_up_test_run is > a better place to put this, as we don't need to copy it for each build > target. And, as I realized then thinking about the property (down > below), we don't need to do that even per test_run; once per TG node's > lifetime is enough. That makes sense to me actually considering the traffic generator being used cannot change throughout the node's lifetime. I will make that change. > > >> copying the script to the TG node and storing its location on the TG > >> node. We should have access to the script whether DTS is run from the > >> repository or a tarball. > > > > We should have access to it regardless, but extracting only that one > > script would be different based on if it was a tarball or a repository > > since, I believe at least, I would have to use the tarfile library to > > read and extract only this one file to copy over if it was a tarball. > > It would be faster I assume, so if you think it is worth it I could > > make the change. Unless you are saying that we wouldn't need to take > > the devbind script from the tarball that is passed into the DTS run > > and instead assume that we can just go one directory up from `dts/` on > > the runner host. That could be an interesting idea which would be > > faster, but I wasn't sure if that was something that was fine to do > > since (I don't think at least) there is anything that technically ties > > you to running from in a DPDK directory other than the docker > > container. > > You can run DTS from any directory, but currently DTS it's always going > to be in a DPDK tree (there's no other way to get DTS), so I think it's > safe to assume the script is there. We can put a variable pointing to > dpdk_root into utils.py and use that. > Fair enough, I don't see why it would be run outside of the DPDK directory in most cases. There is one situation where it could happen, which is the runner target for the Docker container copies only the DTS directory into the container when it "bakes DTS in." It does so because it really only needs the .toml file for the poetry install and, realistically, it seems like you should normally be mounting your local DPDK directory over the DTS directory, but maybe that isn't super clear. Out of scope for this patch, but just something to note. > My idea was copying that one file, nothing else (no tarball or anything > would be needed). > I think we'd only need to move _remote_tmp_dir and > _path_to_devbind_script to Node and then implement set_up_test_run() on > the TG node to copy just the script (with self.main_session.copy_to()) > and set _path_to_devbind_script. And I guess set _path_to_devbind_script > in SutNode.tear_down_build_target() and TGNode.tear_down_test_run() > since those seems to be missing. > > But there's actually one more thing we could improve on top of that. > _path_to_devbind_script could be a property which would be used the same > way in SutNode, but in TGNode, we could copy the script only if it's > None and set it back to None only when closing the Node (as we need to > copy the script only once per TG node lifespan). Sure, that makes sense to me. I'll make that change. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-09-18 18:50 ` Jeremy Spewock @ 2024-09-19 9:10 ` Juraj Linkeš 0 siblings, 0 replies; 11+ messages in thread From: Juraj Linkeš @ 2024-09-19 9:10 UTC (permalink / raw) To: Jeremy Spewock Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, paul.szczepanek, npratte, thomas, yoan.picchi, probb, dev On 18. 9. 2024 20:50, Jeremy Spewock wrote: > On Mon, Sep 16, 2024 at 6:04 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: >> >> >> >> On 9. 9. 2024 17:55, Jeremy Spewock wrote: >>> On Mon, Sep 9, 2024 at 8:16 AM Juraj Linkeš <juraj.linkes@pantheon.tech> wrote: >>>> >>>> >>>> >>>> On 12. 8. 2024 19:22, jspewock@iol.unh.edu wrote: >>>>> From: Jeremy Spewock <jspewock@iol.unh.edu> >>>>> >>>>> The DTS framework in its current state supports binding ports to >>>>> different drivers on the SUT node but not the TG node. The TG node >>>>> already has the information that it needs about the different drivers >>>>> that it has available in the configuration file, but it did not >>>>> previously have access to the devbind script, so it did not use that >>>>> information for anything. >>>>> >>>>> This patch moves the steps to copy the DPDK tarball into the node class >>>>> rather than the SUT node class, and calls this function on the TG node >>>>> as well as the SUT. It also moves the driver binding step into the Node >>>>> class and triggers the same pattern of binding to ports that existed on >>>>> the SUT on the TG. >>>>> >>>> >>>> This is a very inefficient way to do this. We'll have to build DPDK >>>> twice and that's very time consuming. I was thinking in terms of just >>> >>> This patch shouldn't be compiling DPDK twice, are you referring to the >>> process of copying the tarball over and extracting it taking too long? >>> If so, that makes sense that it takes longer than we need for this one >>> task. I figured it wouldn't hurt to have the whole DPDK directory >>> there, and that it could even be potentially useful to have it if the >>> TG ever needed it. That and it seemed like the most straightforward >>> way that kept these two set up in a similar way. Extracting the >>> tarball is obviously pretty quick, so I guess the real question here >>> is whether it is fine to add the time of one extra SCP of the DPDK >>> tarball around. >>> >> >> Ah, I didn't look carefully at the split. This is fine, but there some >> things I noticed. >> >> As Patrick mentioned, the docstrings in Node.set_up_build_target() and >> SutNode.set_up_build_target() would need to be updated. >> Why are we binding ports on the TG node? > > I figured that the assumption would be that whatever is in the config > file is what the TG needs to be bound to in order to run the testing, > similarly to how we always bind on the SUT assuming that we need to be > using the DPDK driver to test DPDK. > Ah, I see. That makes sense now and we should do that. I was thinking a bit ahead. If we have two traffic generators, one for performance, one for functional testing, each using a different driver, we'd run into problems there. We're not there yet, so that's a problem that will need solving in a future patchset. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/1] dts: add binding to different drivers to TG node 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock 2024-08-12 17:49 ` Nicholas Pratte 2024-09-09 12:16 ` Juraj Linkeš @ 2024-09-12 13:00 ` Patrick Robb 2 siblings, 0 replies; 11+ messages in thread From: Patrick Robb @ 2024-09-12 13:00 UTC (permalink / raw) To: jspewock Cc: alex.chapman, Luca.Vizzarro, wathsala.vithanage, Honnappa.Nagarahalli, juraj.linkes, paul.szczepanek, npratte, thomas, yoan.picchi, dev Looks good to me, and I don't understand it as triggering a second compile on the TG node. I wonder whether the docstring for set_up_build_target() makes it sound like it does though? Reviewed-by: Patrick Robb <probb@iol.unh.edu> ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 0/1] dts: add driver binding on TG 2024-08-12 17:22 [PATCH 0/1] dts: add driver binding on TG jspewock 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock @ 2024-09-19 18:16 ` jspewock 2024-09-19 18:16 ` [PATCH v2 1/1] dts: add binding to different drivers to TG node jspewock 1 sibling, 1 reply; 11+ messages in thread From: jspewock @ 2024-09-19 18:16 UTC (permalink / raw) To: alex.chapman, npratte, thomas, Honnappa.Nagarahalli, juraj.linkes, probb, yoan.picchi, Luca.Vizzarro, paul.szczepanek, wathsala.vithanage Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> v2: * only copy the devbind script onto the TG node rather than the entire DPDK directory Jeremy Spewock (1): dts: add binding to different drivers to TG node dts/framework/runner.py | 2 + dts/framework/testbed_model/node.py | 49 ++++++++++++++++++++++++- dts/framework/testbed_model/sut_node.py | 39 ++++++-------------- dts/framework/testbed_model/tg_node.py | 21 +++++++++++ dts/framework/utils.py | 4 +- 5 files changed, 85 insertions(+), 30 deletions(-) -- 2.46.0 -- *Let's Connect!* ... *October Webinars* Ask Us Anything: IOL Services Open Q&A <https://unh.zoom.us/webinar/register/9017265932716/WN_OUo5S7iQRLmKKY7CsmwZhw#/registration>Your questions. Our answers. Let's get started. Oct 3rd Live Tour of INTACT(R) for IPv6 Testing and Validation <https://unh.zoom.us/webinar/register/7117231236474/WN_I2zfyi_2S2yEiXkxBRi8sA#/registration> Open tour. Open Q&A. See why we think you'll love INTACT. Oct 9th How to Prep for Our NVMe(R) Plugfest #21 <https://unh.zoom.us/webinar/register/4017266809553/WN_X1iA2SZ8QhmcGboF2DImNg#/registration> Checklists. Conversation. Let's get ready to plugin! Oct 15th ... * Newsletter* * * Get the IOL Connector <https://www.iol.unh.edu/news/email-newsletters> for our latest news and event info. . ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 1/1] dts: add binding to different drivers to TG node 2024-09-19 18:16 ` [PATCH v2 0/1] dts: add driver binding on TG jspewock @ 2024-09-19 18:16 ` jspewock 0 siblings, 0 replies; 11+ messages in thread From: jspewock @ 2024-09-19 18:16 UTC (permalink / raw) To: alex.chapman, npratte, thomas, Honnappa.Nagarahalli, juraj.linkes, probb, yoan.picchi, Luca.Vizzarro, paul.szczepanek, wathsala.vithanage Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> The DTS framework in its current state supports binding ports to different drivers on the SUT node but not the TG node. The TG node already has the information that it needs about the different drivers that it has available in the configuration file, but it did not previously have access to the devbind script, so it did not use that information for anything. This patch moves the location of the tmp directory as well as the method for binding ports into the node class rather than the SUT node class and adds an abstract method for getting the path to the devbind script into the node class. Then, binding ports to the correct drivers is moved into the build target setup and run on both nodes. Bugzilla ID: 1420 Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> --- dts/framework/runner.py | 2 + dts/framework/testbed_model/node.py | 49 ++++++++++++++++++++++++- dts/framework/testbed_model/sut_node.py | 39 ++++++-------------- dts/framework/testbed_model/tg_node.py | 21 +++++++++++ dts/framework/utils.py | 4 +- 5 files changed, 85 insertions(+), 30 deletions(-) diff --git a/dts/framework/runner.py b/dts/framework/runner.py index ab98de8353..4c884fbcd4 100644 --- a/dts/framework/runner.py +++ b/dts/framework/runner.py @@ -486,6 +486,7 @@ def _run_build_target( try: sut_node.set_up_build_target(build_target_config) + tg_node.set_up_build_target(build_target_config) self._result.dpdk_version = sut_node.dpdk_version build_target_result.add_build_target_info(sut_node.get_build_target_info()) build_target_result.update_setup(Result.PASS) @@ -500,6 +501,7 @@ def _run_build_target( try: self._logger.set_stage(DtsStage.build_target_teardown) sut_node.tear_down_build_target() + tg_node.tear_down_build_target() build_target_result.update_teardown(Result.PASS) except Exception as e: self._logger.exception("Build target teardown failed.") diff --git a/dts/framework/testbed_model/node.py b/dts/framework/testbed_model/node.py index 12a40170ac..6484e16a0f 100644 --- a/dts/framework/testbed_model/node.py +++ b/dts/framework/testbed_model/node.py @@ -13,11 +13,18 @@ The :func:`~Node.skip_setup` decorator can be used without subclassing. """ -from abc import ABC + +from abc import ABC, abstractmethod from ipaddress import IPv4Interface, IPv6Interface +from pathlib import PurePath from typing import Any, Callable, Union -from framework.config import OS, NodeConfiguration, TestRunConfiguration +from framework.config import ( + OS, + BuildTargetConfiguration, + NodeConfiguration, + TestRunConfiguration, +) from framework.exception import ConfigurationError from framework.logger import DTSLogger, get_dts_logger from framework.settings import SETTINGS @@ -58,8 +65,10 @@ class Node(ABC): lcores: list[LogicalCore] ports: list[Port] _logger: DTSLogger + _remote_tmp_dir: PurePath _other_sessions: list[OSSession] _test_run_config: TestRunConfiguration + _path_to_devbind_script: PurePath | None def __init__(self, node_config: NodeConfiguration): """Connect to the node and gather info during initialization. @@ -88,6 +97,8 @@ def __init__(self, node_config: NodeConfiguration): self._other_sessions = [] self._init_ports() + self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() + self._path_to_devbind_script = None def _init_ports(self) -> None: self.ports = [Port(self.name, port_config) for port_config in self.config.ports] @@ -95,6 +106,11 @@ def _init_ports(self) -> None: for port in self.ports: self.configure_port_state(port) + @property + @abstractmethod + def path_to_devbind_script(self) -> PurePath: + """The path to the dpdk-devbind.py script on the node.""" + def set_up_test_run(self, test_run_config: TestRunConfiguration) -> None: """Test run setup steps. @@ -114,6 +130,20 @@ def tear_down_test_run(self) -> None: Additional steps can be added by extending the method in subclasses with the use of super(). """ + def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None: + """Bind ports to their DPDK drivers. + + Args: + build_target_config: The build target test run configuration according to which + the setup steps will be taken. This is unused in this method, but subclasses that + extend this method may need it. + """ + self.bind_ports_to_driver() + + def tear_down_build_target(self) -> None: + """Bind ports to their OS drivers.""" + self.bind_ports_to_driver(for_dpdk=False) + def create_session(self, name: str) -> OSSession: """Create and return a new OS-aware remote session. @@ -228,6 +258,21 @@ def skip_setup(func: Callable[..., Any]) -> Callable[..., Any]: else: return func + def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: + """Bind all ports on the node to a driver. + + Args: + for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. + If :data:`False`, binds to os_driver. + """ + for port in self.ports: + driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver + self.main_session.send_command( + f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", + privileged=True, + verify=True, + ) + def create_session(node_config: NodeConfiguration, name: str, logger: DTSLogger) -> OSSession: """Factory for OS-aware sessions. diff --git a/dts/framework/testbed_model/sut_node.py b/dts/framework/testbed_model/sut_node.py index 2855fe0276..d68270eee1 100644 --- a/dts/framework/testbed_model/sut_node.py +++ b/dts/framework/testbed_model/sut_node.py @@ -59,14 +59,12 @@ class SutNode(Node): dpdk_timestamp: str _build_target_config: BuildTargetConfiguration | None _env_vars: dict - _remote_tmp_dir: PurePath __remote_dpdk_dir: PurePath | None _app_compile_timeout: float _dpdk_kill_session: OSSession | None _dpdk_version: str | None _node_info: NodeInfo | None _compiler_version: str | None - _path_to_devbind_script: PurePath | None def __init__(self, node_config: SutNodeConfiguration): """Extend the constructor with SUT node specifics. @@ -79,7 +77,6 @@ def __init__(self, node_config: SutNodeConfiguration): self.dpdk_prefix_list = [] self._build_target_config = None self._env_vars = {} - self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() self.__remote_dpdk_dir = None self._app_compile_timeout = 90 self._dpdk_kill_session = None @@ -89,7 +86,6 @@ def __init__(self, node_config: SutNodeConfiguration): self._dpdk_version = None self._node_info = None self._compiler_version = None - self._path_to_devbind_script = None self._logger.info(f"Created node: {self.name}") @property @@ -153,7 +149,11 @@ def compiler_version(self) -> str: @property def path_to_devbind_script(self) -> PurePath: - """The path to the dpdk-devbind.py script on the node.""" + """Implements :meth:`Node.path_to_devbind_script` on the SUT node. + + It is expected that the DPDK directory will be available on this host before this property + is accessed. + """ if self._path_to_devbind_script is None: self._path_to_devbind_script = self.main_session.join_remote_path( self._remote_dpdk_dir, "usertools", "dpdk-devbind.py" @@ -190,28 +190,28 @@ def tear_down_test_run(self) -> None: self.virtual_devices = [] def set_up_build_target(self, build_target_config: BuildTargetConfiguration) -> None: - """Set up DPDK the SUT node and bind ports. + """Extend :meth:`Node.set_up_build_target` with DPDK setup steps. DPDK setup includes setting all internals needed for the build, the copying of DPDK tarball - and then building DPDK. The drivers are bound to those that DPDK needs. + and then building DPDK. Args: build_target_config: The build target test run configuration according to which the setup steps will be taken. """ - self._configure_build_target(build_target_config) self._copy_dpdk_tarball() + super().set_up_build_target(build_target_config) + self._configure_build_target(build_target_config) self._build_dpdk() - self.bind_ports_to_driver() def tear_down_build_target(self) -> None: - """Reset DPDK variables and bind port driver to the OS driver.""" + """Extend :meth:`Node.tear_down_build_target` with the resetting of DPDK variables.""" + super().tear_down_build_target() self._env_vars = {} - self._build_target_config = None self.__remote_dpdk_dir = None + self._build_target_config = None self._dpdk_version = None self._compiler_version = None - self.bind_ports_to_driver(for_dpdk=False) def _configure_build_target(self, build_target_config: BuildTargetConfiguration) -> None: """Populate common environment variables and set build target config.""" @@ -335,18 +335,3 @@ def configure_ipv4_forwarding(self, enable: bool) -> None: enable: If :data:`True`, enable the forwarding, otherwise disable it. """ self.main_session.configure_ipv4_forwarding(enable) - - def bind_ports_to_driver(self, for_dpdk: bool = True) -> None: - """Bind all ports on the SUT to a driver. - - Args: - for_dpdk: If :data:`True`, binds ports to os_driver_for_dpdk. - If :data:`False`, binds to os_driver. - """ - for port in self.ports: - driver = port.os_driver_for_dpdk if for_dpdk else port.os_driver - self.main_session.send_command( - f"{self.path_to_devbind_script} -b {driver} --force {port.pci}", - privileged=True, - verify=True, - ) diff --git a/dts/framework/testbed_model/tg_node.py b/dts/framework/testbed_model/tg_node.py index 19b5b6e74c..25facb5e67 100644 --- a/dts/framework/testbed_model/tg_node.py +++ b/dts/framework/testbed_model/tg_node.py @@ -9,12 +9,15 @@ A TG node is where the TG runs. """ +from pathlib import PurePath + from scapy.packet import Packet # type: ignore[import-untyped] from framework.config import TGNodeConfiguration from framework.testbed_model.traffic_generator.capturing_traffic_generator import ( PacketFilteringConfig, ) +from framework.utils import LOCAL_DPDK_DIR from .node import Node from .port import Port @@ -51,6 +54,24 @@ def __init__(self, node_config: TGNodeConfiguration): self.traffic_generator = create_traffic_generator(self, node_config.traffic_generator) self._logger.info(f"Created node: {self.name}") + @property + def path_to_devbind_script(self) -> PurePath: + """Implements :meth:`Node.path_to_devbind_script` on the TG node. + + For traffic generators this script is only copied onto the host when needed by the + framework. + """ + if self._path_to_devbind_script is None: + self._logger.info(f"Copying dpdk-devbind script into {self._remote_tmp_dir}") + self.main_session.copy_to( + PurePath(LOCAL_DPDK_DIR, "usertools", "dpdk-devbind.py"), + PurePath(self._remote_tmp_dir, "dpdk-devbind.py"), + ) + self._path_to_devbind_script = self.main_session.join_remote_path( + self._remote_tmp_dir, "dpdk-devbind.py" + ) + return self._path_to_devbind_script + def send_packets_and_capture( self, packets: list[Packet], diff --git a/dts/framework/utils.py b/dts/framework/utils.py index c768dd0c99..fcc178e600 100644 --- a/dts/framework/utils.py +++ b/dts/framework/utils.py @@ -20,7 +20,7 @@ import random import subprocess from enum import Enum, Flag -from pathlib import Path +from pathlib import Path, PurePath from subprocess import SubprocessError from scapy.layers.inet import IP, TCP, UDP, Ether # type: ignore[import-untyped] @@ -29,6 +29,8 @@ from .exception import ConfigurationError, InternalError REGEX_FOR_PCI_ADDRESS: str = "/[0-9a-fA-F]{4}:[0-9a-fA-F]{2}:[0-9a-fA-F]{2}.[0-9]{1}/" +#: Path to DPDK directory on the host where DTS is being run. +LOCAL_DPDK_DIR: PurePath = PurePath(__file__).parents[2] def expand_range(range_str: str) -> list[int]: -- 2.46.0 -- *Let's Connect!* ... *October Webinars* Ask Us Anything: IOL Services Open Q&A <https://unh.zoom.us/webinar/register/9017265932716/WN_OUo5S7iQRLmKKY7CsmwZhw#/registration>Your questions. Our answers. Let's get started. Oct 3rd Live Tour of INTACT(R) for IPv6 Testing and Validation <https://unh.zoom.us/webinar/register/7117231236474/WN_I2zfyi_2S2yEiXkxBRi8sA#/registration> Open tour. Open Q&A. See why we think you'll love INTACT. Oct 9th How to Prep for Our NVMe(R) Plugfest #21 <https://unh.zoom.us/webinar/register/4017266809553/WN_X1iA2SZ8QhmcGboF2DImNg#/registration> Checklists. Conversation. Let's get ready to plugin! Oct 15th ... * Newsletter* * * Get the IOL Connector <https://www.iol.unh.edu/news/email-newsletters> for our latest news and event info. . ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2024-09-19 18:16 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-08-12 17:22 [PATCH 0/1] dts: add driver binding on TG jspewock 2024-08-12 17:22 ` [PATCH 1/1] dts: add binding to different drivers to TG node jspewock 2024-08-12 17:49 ` Nicholas Pratte 2024-09-09 12:16 ` Juraj Linkeš 2024-09-09 15:55 ` Jeremy Spewock 2024-09-16 10:04 ` Juraj Linkeš 2024-09-18 18:50 ` Jeremy Spewock 2024-09-19 9:10 ` Juraj Linkeš 2024-09-12 13:00 ` Patrick Robb 2024-09-19 18:16 ` [PATCH v2 0/1] dts: add driver binding on TG jspewock 2024-09-19 18:16 ` [PATCH v2 1/1] dts: add binding to different drivers to TG node jspewock
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).