From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, gakhil@marvell.com, david.marchand@redhat.com
Cc: Gagandeep Singh <g.singh@nxp.com>, Jun Yang <jun.yang@nxp.com>,
Gagandeep Singh <G.singh@nxp.com>
Subject: [PATCH] crypto/dpaa2_sec: rework debug code
Date: Mon, 7 Oct 2024 14:10:14 +0530 [thread overview]
Message-ID: <20241007084014.851198-1-g.singh@nxp.com> (raw)
Output debug information according to various modes.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Gagandeep Singh <G.singh@nxp.com>
---
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 87 +++++++++++++++------
1 file changed, 63 insertions(+), 24 deletions(-)
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 2cdf9308f8..1a897514e1 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -1097,7 +1097,7 @@ build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
static int
build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
- struct qbman_fd *fd, __rte_unused uint16_t bpid)
+ struct qbman_fd *fd, uint16_t bpid)
{
struct rte_crypto_sym_op *sym_op = op->sym;
struct qbman_fle *ip_fle, *op_fle, *sge, *fle;
@@ -1107,6 +1107,10 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
struct rte_mbuf *mbuf;
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
data_len = sym_op->cipher.data.length;
data_offset = sym_op->cipher.data.offset;
@@ -1212,14 +1216,26 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
DPAA2_SET_FD_COMPOUND_FMT(fd);
DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
- DPAA2_SEC_DP_DEBUG(
- "CIPHER SG: fdaddr =%" PRIx64 " bpid =%d meta =%d"
- " off =%d, len =%d",
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str,
+ "CIPHER SG: fdaddr =%" PRIx64 ", from %s pool ",
DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[bpid].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+ bpid < MAX_BPID ? "SW" : "BMAN");
+ if (bpid < MAX_BPID) {
+ offset += sprintf(&debug_str[offset],
+ "bpid = %d ", bpid);
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ",
+ mbuf->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "off =%d, len =%d",
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#else
+ RTE_SET_USED(bpid);
+#endif
+
return 0;
}
@@ -1235,6 +1251,10 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
sess->iv.offset);
struct rte_mbuf *dst;
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
data_len = sym_op->cipher.data.length;
data_offset = sym_op->cipher.data.offset;
@@ -1326,14 +1346,23 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
DPAA2_SET_FLE_FIN(sge);
DPAA2_SET_FLE_FIN(fle);
- DPAA2_SEC_DP_DEBUG(
- "CIPHER: fdaddr =%" PRIx64 " bpid =%d meta =%d"
- " off =%d, len =%d",
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str,
+ "CIPHER: fdaddr =%" PRIx64 ", from %s pool ",
DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[bpid].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+ bpid < MAX_BPID ? "SW" : "BMAN");
+ if (bpid < MAX_BPID) {
+ offset += sprintf(&debug_str[offset],
+ "bpid = %d ", bpid);
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ",
+ dst->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "off =%d, len =%d",
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#endif
return 0;
}
@@ -1566,6 +1595,10 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, struct dpaa2_sec_qp *qp)
struct qbman_fle *fle;
struct rte_crypto_op *op;
struct rte_mbuf *dst, *src;
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ char debug_str[1024];
+ int offset;
+#endif
if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single)
return sec_simple_fd_to_mbuf(fd);
@@ -1604,15 +1637,21 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, struct dpaa2_sec_qp *qp)
dst->data_len = len;
}
- DPAA2_SEC_DP_DEBUG("mbuf %p BMAN buf addr %p,"
- " fdaddr =%" PRIx64 " bpid =%d meta =%d off =%d, len =%d",
- (void *)dst,
- dst->buf_addr,
- DPAA2_GET_FD_ADDR(fd),
- DPAA2_GET_FD_BPID(fd),
- rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
- DPAA2_GET_FD_OFFSET(fd),
- DPAA2_GET_FD_LEN(fd));
+#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
+ offset = sprintf(debug_str, "Mbuf %p from %s pool ",
+ dst, DPAA2_GET_FD_IVP(fd) ? "SW" : "BMAN");
+ if (!DPAA2_GET_FD_IVP(fd)) {
+ offset += sprintf(&debug_str[offset], "bpid = %d ",
+ DPAA2_GET_FD_BPID(fd));
+ }
+ offset += sprintf(&debug_str[offset],
+ "private size = %d ", dst->pool->private_data_size);
+ offset += sprintf(&debug_str[offset],
+ "addr %p, fdaddr =%" PRIx64 ", off =%d, len =%d",
+ dst->buf_addr, DPAA2_GET_FD_ADDR(fd),
+ DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
+ DPAA2_SEC_DP_DEBUG("%s", debug_str);
+#endif
/* free the fle memory */
if (likely(rte_pktmbuf_is_contiguous(src))) {
--
2.25.1
next reply other threads:[~2024-10-07 8:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 8:40 Gagandeep Singh [this message]
2024-10-07 8:43 Gagandeep Singh
2024-10-07 8:48 ` David Marchand
2024-10-07 15:25 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241007084014.851198-1-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jun.yang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).