From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: Liron Himi <lironh@marvell.com>,
Chengwen Feng <fengchengwen@huawei.com>,
David Marchand <david.marchand@redhat.com>,
Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Subject: [PATCH] net/mvpp2: fix build by removing newlines in logs
Date: Wed, 9 Oct 2024 11:18:52 +0200 [thread overview]
Message-ID: <20241009091853.763626-1-thomas@monjalon.net> (raw)
After using RTE_LOG_LINE_PREFIX in MRVL_LOG macro,
an assert was detecting some newlines in logs.
After removing these superfluous newlines, the compilation passes.
Fixes: 2b843cac232e ("drivers: use per line logging in helpers")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
drivers/net/mvpp2/mrvl_ethdev.c | 14 ++++-----
drivers/net/mvpp2/mrvl_qos.c | 56 ++++++++++++++++-----------------
2 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index 36be79b9a5..4200c11d46 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -215,7 +215,7 @@ mrvl_pp2_fixup_init(void)
dummy_pool_id[i] = mrvl_reserve_bit(&used_bpools[i],
PP2_BPOOL_NUM_POOLS);
if (dummy_pool_id[i] < 0) {
- MRVL_LOG(ERR, "Can't find free pool\n");
+ MRVL_LOG(ERR, "Can't find free pool");
return -1;
}
@@ -227,7 +227,7 @@ mrvl_pp2_fixup_init(void)
bpool_params.dummy_short_pool = 1;
err = pp2_bpool_init(&bpool_params, &dummy_pool[i]);
if (err != 0 || !dummy_pool[i]) {
- MRVL_LOG(ERR, "BPool init failed!\n");
+ MRVL_LOG(ERR, "BPool init failed!");
used_bpools[i] &= ~(1 << dummy_pool_id[i]);
return -1;
}
@@ -491,7 +491,7 @@ mrvl_dev_configure(struct rte_eth_dev *dev)
}
if (dev->data->dev_conf.rxmode.mtu > priv->max_mtu) {
- MRVL_LOG(ERR, "MTU %u is larger than max_mtu %u\n",
+ MRVL_LOG(ERR, "MTU %u is larger than max_mtu %u",
dev->data->dev_conf.rxmode.mtu,
priv->max_mtu);
return -EINVAL;
@@ -770,7 +770,7 @@ static int mrvl_populate_vlan_table(struct rte_eth_dev *dev, int on)
vbit >>= 1;
ret = mrvl_vlan_filter_set(dev, vlan, on);
if (ret) {
- MRVL_LOG(ERR, "Failed to setup VLAN filter\n");
+ MRVL_LOG(ERR, "Failed to setup VLAN filter");
return ret;
}
}
@@ -1875,7 +1875,7 @@ static int mrvl_vlan_offload_set(struct rte_eth_dev *dev, int mask)
int ret;
if (mask & RTE_ETH_VLAN_STRIP_MASK) {
- MRVL_LOG(ERR, "VLAN stripping is not supported\n");
+ MRVL_LOG(ERR, "VLAN stripping is not supported");
return -ENOTSUP;
}
@@ -1890,7 +1890,7 @@ static int mrvl_vlan_offload_set(struct rte_eth_dev *dev, int mask)
}
if (mask & RTE_ETH_VLAN_EXTEND_MASK) {
- MRVL_LOG(ERR, "Extend VLAN not supported\n");
+ MRVL_LOG(ERR, "Extend VLAN not supported");
return -ENOTSUP;
}
@@ -1941,7 +1941,7 @@ mrvl_fill_bpool(struct mrvl_rxq *rxq, int num)
!= cookie_addr_high) {
MRVL_LOG(ERR,
"mbuf virtual addr high is out of range "
- "0x%x instead of 0x%x\n",
+ "0x%x instead of 0x%x",
(uint32_t)((uint64_t)mbufs[i] >> 32),
(uint32_t)(cookie_addr_high >> 32));
goto out;
diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c
index f43217bc58..e298da2724 100644
--- a/drivers/net/mvpp2/mrvl_qos.c
+++ b/drivers/net/mvpp2/mrvl_qos.c
@@ -500,7 +500,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
entry = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_PARSER_UDF_PROTO);
if (!entry) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set", udf,
MRVL_TOK_PARSER_UDF_PROTO);
return -1;
}
@@ -509,7 +509,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
entry_field = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_PARSER_UDF_FIELD);
if (!entry_field) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set", udf,
MRVL_TOK_PARSER_UDF_FIELD);
return -1;
}
@@ -523,7 +523,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
field_size = 2;
} else {
MRVL_LOG(ERR, "UDF[%d]: mismatch between '%s' proto "
- "and '%s' field\n", udf,
+ "and '%s' field", udf,
MRVL_TOK_PARSER_UDF_PROTO_ETH,
entry_field);
return -1;
@@ -537,45 +537,45 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
field_size = 2;
} else {
MRVL_LOG(ERR, "UDF[%d]: mismatch between '%s' proto "
- "and '%s' field\n", udf,
+ "and '%s' field", udf,
MRVL_TOK_PARSER_UDF_PROTO_UDP,
entry_field);
return -1;
}
} else {
- MRVL_LOG(ERR, "UDF[%d]: Unsupported '%s' proto\n", udf, entry);
+ MRVL_LOG(ERR, "UDF[%d]: Unsupported '%s' proto", udf, entry);
return -1;
}
snprintf(malloc_name, sizeof(malloc_name), "mrvl_udf_%d_key", udf);
udf_params->match_key = rte_zmalloc(malloc_name, field_size, 0);
if (udf_params->match_key == NULL) {
- MRVL_LOG(ERR, "Cannot allocate udf %d key\n", udf);
+ MRVL_LOG(ERR, "Cannot allocate udf %d key", udf);
return -1;
}
snprintf(malloc_name, sizeof(malloc_name), "mrvl_udf_%d_mask", udf);
udf_params->match_mask = rte_zmalloc(malloc_name, field_size, 0);
if (udf_params->match_mask == NULL) {
- MRVL_LOG(ERR, "Cannot allocate udf %d mask\n", udf);
+ MRVL_LOG(ERR, "Cannot allocate udf %d mask", udf);
return -1;
}
/* Read 'key' field */
entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_PARSER_UDF_KEY);
if (!entry) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set", udf,
MRVL_TOK_PARSER_UDF_KEY);
return -1;
}
if (strncmp(entry, "0x", 2) != 0) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'\n",
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'",
udf, MRVL_TOK_PARSER_UDF_KEY);
return -EINVAL;
}
if (strlen(entry) != FIELD_LEN_IN_CHARS(field_size)) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d", udf,
MRVL_TOK_PARSER_UDF_KEY,
FIELD_LEN_IN_CHARS(field_size));
return -EINVAL;
@@ -588,7 +588,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
if (get_val_securely8(tmp_arr, 16,
&udf_params->match_key[i]) < 0) {
MRVL_LOG(ERR, "UDF[%d]: '%s' field's value is not in "
- "hex format\n", udf, MRVL_TOK_PARSER_UDF_KEY);
+ "hex format", udf, MRVL_TOK_PARSER_UDF_KEY);
return -EINVAL;
}
entry += 2;
@@ -597,18 +597,18 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
/* Read 'mask' field */
entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_PARSER_UDF_MASK);
if (!entry) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set", udf,
MRVL_TOK_PARSER_UDF_MASK);
return -1;
}
if (strncmp(entry, "0x", 2) != 0) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'\n",
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must start with '0x'",
udf, MRVL_TOK_PARSER_UDF_MASK);
return -EINVAL;
}
if (strlen(entry) != FIELD_LEN_IN_CHARS(field_size)) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field's len must be %d", udf,
MRVL_TOK_PARSER_UDF_MASK,
FIELD_LEN_IN_CHARS(field_size));
return -EINVAL;
@@ -621,7 +621,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
if (get_val_securely8(tmp_arr, 16,
&udf_params->match_mask[i]) < 0) {
MRVL_LOG(ERR, "UDF[%d]: '%s' field's value is not in "
- "hex format\n", udf, MRVL_TOK_PARSER_UDF_MASK);
+ "hex format", udf, MRVL_TOK_PARSER_UDF_MASK);
return -EINVAL;
}
entry += 2;
@@ -631,7 +631,7 @@ parse_udf(struct rte_cfgfile *file, const char *sec_name, int udf,
entry = rte_cfgfile_get_entry(file, sec_name,
MRVL_TOK_PARSER_UDF_OFFSET);
if (!entry) {
- MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set\n", udf,
+ MRVL_LOG(ERR, "UDF[%d]: '%s' field must be set", udf,
MRVL_TOK_PARSER_UDF_OFFSET);
return -1;
}
@@ -663,7 +663,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
char sec_name[32];
if (file == NULL) {
- MRVL_LOG(ERR, "Cannot load configuration %s\n", path);
+ MRVL_LOG(ERR, "Cannot load configuration %s", path);
return -1;
}
@@ -672,7 +672,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
*/
*cfg = rte_zmalloc("mrvl_cfg", sizeof(struct mrvl_cfg), 0);
if (*cfg == NULL) {
- MRVL_LOG(ERR, "Cannot allocate configuration %s\n", path);
+ MRVL_LOG(ERR, "Cannot allocate configuration %s", path);
return -1;
}
@@ -681,7 +681,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
sizeof(MRVL_TOK_PARSER_UDF) - 1);
if (n && n > PP2_MAX_UDFS_SUPPORTED) {
- MRVL_LOG(ERR, "found %d udf sections, but only %d are supported\n",
+ MRVL_LOG(ERR, "found %d udf sections, but only %d are supported",
n, PP2_MAX_UDFS_SUPPORTED);
return -1;
}
@@ -693,14 +693,14 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
/* udf sections must be sequential. */
if (rte_cfgfile_num_sections(file, sec_name,
strlen(sec_name)) <= 0) {
- MRVL_LOG(ERR, "udf sections must be sequential (0 - %d)\n",
+ MRVL_LOG(ERR, "udf sections must be sequential (0 - %d)",
PP2_MAX_UDFS_SUPPORTED - 1);
return -1;
}
ret = parse_udf(file, sec_name, i, *cfg);
if (ret) {
- MRVL_LOG(ERR, "Error in parsing %s!\n", sec_name);
+ MRVL_LOG(ERR, "Error in parsing %s!", sec_name);
return -1;
}
}
@@ -763,7 +763,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
PP2_PPIO_HDR_ETH_EXT_DSA;
} else {
MRVL_LOG(ERR,
- "Error in parsing %s value (%s)!\n",
+ "Error in parsing %s value (%s)!",
MRVL_TOK_START_HDR, entry);
return -1;
}
@@ -823,7 +823,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
PP2_CLS_QOS_TBL_VLAN_PRI;
} else {
MRVL_LOG(ERR,
- "Error in parsing %s value (%s)!\n",
+ "Error in parsing %s value (%s)!",
MRVL_TOK_MAPPING_PRIORITY, entry);
return -1;
}
@@ -851,7 +851,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
ret = get_outq_cfg(file, n, i, *cfg);
if (ret < 0) {
MRVL_LOG(ERR,
- "Error %d parsing port %d outq %d!\n",
+ "Error %d parsing port %d outq %d!",
ret, n, i);
return -1;
}
@@ -861,7 +861,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
ret = parse_tc_cfg(file, n, i, *cfg);
if (ret < 0) {
MRVL_LOG(ERR,
- "Error %d parsing port %d tc %d!\n",
+ "Error %d parsing port %d tc %d!",
ret, n, i);
return -1;
}
@@ -889,7 +889,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
if (entry) {
if (get_val_securely(entry, &val) < 0) {
MRVL_LOG(ERR,
- "Error in parsing %s value (%s)!\n",
+ "Error in parsing %s value (%s)!",
MRVL_TOK_FWD_BAD_FRAMES, entry);
return -1;
}
@@ -904,7 +904,7 @@ mrvl_get_cfg(const char *key __rte_unused, const char *path, void *extra_args)
if (entry) {
if (get_val_securely(entry, &val) < 0) {
MRVL_LOG(ERR,
- "Error in parsing %s value (%s)!\n",
+ "Error in parsing %s value (%s)!",
MRVL_TOK_FILL_BPOOL_BUFFS, entry);
return -1;
}
@@ -972,7 +972,7 @@ setup_policer(struct mrvl_priv *priv, struct pp2_cls_plcr_params *params)
*
* Lets use 0th then.
*/
- sprintf(match, "policer-%d:%d\n", priv->pp_id, 0);
+ sprintf(match, "policer-%d:%d", priv->pp_id, 0);
params->match = match;
ret = pp2_cls_plcr_init(params, &priv->default_policer);
--
2.46.0
next reply other threads:[~2024-10-09 9:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-09 9:18 Thomas Monjalon [this message]
2024-10-09 9:24 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241009091853.763626-1-thomas@monjalon.net \
--to=thomas@monjalon.net \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=fengchengwen@huawei.com \
--cc=lironh@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).