From: "Morten Brørup" <mb@smartsharesystems.com>
To: dev@dpdk.org
Cc: "Morten Brørup" <mb@smartsharesystems.com>
Subject: [RFC PATCH v2] net: 2-byte align packed headers
Date: Fri, 11 Oct 2024 16:06:53 +0000 [thread overview]
Message-ID: <20241011160653.88028-1-mb@smartsharesystems.com> (raw)
In-Reply-To: <20241011131930.1855-1-mb@smartsharesystems.com>
Network headers are (at minimum) 2-byte aligned.
Mark them as such.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
---
lib/net/rte_esp.h | 10 +++++++++-
lib/net/rte_ether.h | 23 ++++++++++++++++++++---
lib/net/rte_geneve.h | 2 +-
lib/net/rte_icmp.h | 12 ++++++------
lib/net/rte_ip.h | 30 ++++++++++++++++++++++++++----
lib/net/rte_sctp.h | 9 ++++++++-
lib/net/rte_tcp.h | 9 ++++++++-
lib/net/rte_udp.h | 11 +++++++++--
lib/net/rte_vxlan.h | 9 ++++++++-
9 files changed, 95 insertions(+), 20 deletions(-)
diff --git a/lib/net/rte_esp.h b/lib/net/rte_esp.h
index 745a9847fe..5d3af9c81f 100644
--- a/lib/net/rte_esp.h
+++ b/lib/net/rte_esp.h
@@ -11,16 +11,24 @@
* ESP-related defines
*/
+#include <assert.h>
+#include <stdalign.h>
+
#include <rte_byteorder.h>
/**
* ESP Header
*/
-struct rte_esp_hdr {
+struct __rte_aligned(2) rte_esp_hdr {
rte_be32_t spi; /**< Security Parameters Index */
rte_be32_t seq; /**< packet sequence number */
} __rte_packed;
+static_assert(sizeof(struct rte_esp_hdr) == 8,
+ "sizeof(struct rte_esp_hdr) == 8");
+static_assert(alignof(struct rte_esp_hdr) == 2,
+ "alignof(struct rte_esp_hdr) == 2");
+
/**
* ESP Trailer
*/
diff --git a/lib/net/rte_ether.h b/lib/net/rte_ether.h
index 403e84f50b..64aefd1a6c 100644
--- a/lib/net/rte_ether.h
+++ b/lib/net/rte_ether.h
@@ -11,6 +11,8 @@
* Ethernet Helpers in RTE
*/
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#include <stdio.h>
@@ -75,6 +77,11 @@ struct __rte_aligned(2) rte_ether_addr {
uint8_t addr_bytes[RTE_ETHER_ADDR_LEN]; /**< Addr bytes in tx order */
};
+static_assert(sizeof(struct rte_ether_addr) == 6,
+ "sizeof(struct rte_ether_addr) == 6");
+static_assert(alignof(struct rte_ether_addr) == 2,
+ "alignof(struct rte_ether_addr) == 2");
+
#define RTE_ETHER_LOCAL_ADMIN_ADDR 0x02 /**< Locally assigned Eth. address. */
#define RTE_ETHER_GROUP_ADDR 0x01 /**< Multicast or broadcast Eth. address. */
@@ -290,21 +297,31 @@ rte_ether_unformat_addr(const char *str, struct rte_ether_addr *eth_addr);
* Ethernet header: Contains the destination address, source address
* and frame type.
*/
-struct __rte_aligned(2) rte_ether_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_ether_hdr {
struct rte_ether_addr dst_addr; /**< Destination address. */
struct rte_ether_addr src_addr; /**< Source address. */
rte_be16_t ether_type; /**< Frame type. */
};
+static_assert(sizeof(struct rte_ether_hdr) == 14,
+ "sizeof(struct rte_ether_hdr) == 14");
+static_assert(alignof(struct rte_ether_hdr) == 2,
+ "alignof(struct rte_ether_hdr) == 2");
+
/**
* Ethernet VLAN Header.
* Contains the 16-bit VLAN Tag Control Identifier and the Ethernet type
* of the encapsulated frame.
*/
-struct rte_vlan_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_vlan_hdr {
rte_be16_t vlan_tci; /**< Priority (3) + CFI (1) + Identifier Code (12) */
rte_be16_t eth_proto; /**< Ethernet type of encapsulated frame. */
-} __rte_packed;
+};
+
+static_assert(sizeof(struct rte_vlan_hdr) == 4,
+ "sizeof(struct rte_vlan_hdr) == 4");
+static_assert(alignof(struct rte_vlan_hdr) == 2,
+ "alignof(struct rte_vlan_hdr) == 2");
diff --git a/lib/net/rte_geneve.h b/lib/net/rte_geneve.h
index eb2c85f1e9..9a62b4dad1 100644
--- a/lib/net/rte_geneve.h
+++ b/lib/net/rte_geneve.h
@@ -34,7 +34,7 @@
* More-bits (optional) variable length options.
*/
__extension__
-struct rte_geneve_hdr {
+struct __rte_aligned(2) rte_geneve_hdr {
#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
uint8_t ver:2; /**< Version. */
uint8_t opt_len:6; /**< Options length. */
diff --git a/lib/net/rte_icmp.h b/lib/net/rte_icmp.h
index 7a33280aa1..a461cd339d 100644
--- a/lib/net/rte_icmp.h
+++ b/lib/net/rte_icmp.h
@@ -21,33 +21,33 @@
/**
* ICMP base header
*/
-struct rte_icmp_base_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_icmp_base_hdr {
uint8_t type;
uint8_t code;
rte_be16_t checksum;
-} __rte_packed;
+};
/**
* ICMP echo header
*/
-struct rte_icmp_echo_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_icmp_echo_hdr {
struct rte_icmp_base_hdr base;
rte_be16_t identifier;
rte_be16_t sequence;
-} __rte_packed;
+};
/**
* ICMP Header
*
* @see rte_icmp_echo_hdr which is similar.
*/
-struct rte_icmp_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_icmp_hdr {
uint8_t icmp_type; /* ICMP packet type. */
uint8_t icmp_code; /* ICMP packet code. */
rte_be16_t icmp_cksum; /* ICMP packet checksum. */
rte_be16_t icmp_ident; /* ICMP packet identifier. */
rte_be16_t icmp_seq_nb; /* ICMP packet sequence number. */
-} __rte_packed;
+};
/* ICMP packet types */
#define RTE_IP_ICMP_ECHO_REPLY 0
diff --git a/lib/net/rte_ip.h b/lib/net/rte_ip.h
index 0d103d4127..c8b9fe8f48 100644
--- a/lib/net/rte_ip.h
+++ b/lib/net/rte_ip.h
@@ -15,6 +15,8 @@
* IP-related defines
*/
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#ifdef RTE_EXEC_ENV_WINDOWS
@@ -38,7 +40,7 @@ extern "C" {
/**
* IPv4 Header
*/
-struct rte_ipv4_hdr {
+struct __rte_aligned(2) rte_ipv4_hdr {
__extension__
union {
uint8_t version_ihl; /**< version and header length */
@@ -63,6 +65,11 @@ struct rte_ipv4_hdr {
rte_be32_t dst_addr; /**< destination address */
} __rte_packed;
+static_assert(sizeof(struct rte_ipv4_hdr) == 20,
+ "sizeof(struct rte_ipv4_hdr) == 20");
+static_assert(alignof(struct rte_ipv4_hdr) == 2,
+ "alignof(struct rte_ipv4_hdr) == 2");
+
/** Create IPv4 address */
#define RTE_IPV4(a, b, c, d) ((uint32_t)(((a) & 0xff) << 24) | \
(((b) & 0xff) << 16) | \
@@ -523,7 +530,7 @@ rte_ipv4_udptcp_cksum_mbuf_verify(const struct rte_mbuf *m,
/**
* IPv6 Header
*/
-struct rte_ipv6_hdr {
+struct __rte_aligned(2) rte_ipv6_hdr {
rte_be32_t vtc_flow; /**< IP version, traffic class & flow label. */
rte_be16_t payload_len; /**< IP payload size, including ext. headers */
uint8_t proto; /**< Protocol, next header. */
@@ -532,13 +539,18 @@ struct rte_ipv6_hdr {
uint8_t dst_addr[16]; /**< IP address of destination host(s). */
} __rte_packed;
+static_assert(sizeof(struct rte_ipv6_hdr) == 40,
+ "sizeof(struct rte_ipv6_hdr) == 40");
+static_assert(alignof(struct rte_ipv6_hdr) == 2,
+ "alignof(struct rte_ipv6_hdr) == 2");
+
/* IPv6 routing extension type definition. */
#define RTE_IPV6_SRCRT_TYPE_4 4
/**
* IPv6 Routing Extension Header
*/
-struct rte_ipv6_routing_ext {
+struct __rte_aligned(2) rte_ipv6_routing_ext {
uint8_t next_hdr; /**< Protocol, next header. */
uint8_t hdr_len; /**< Header length. */
uint8_t type; /**< Extension header type. */
@@ -555,6 +567,11 @@ struct rte_ipv6_routing_ext {
/* Next are 128-bit IPv6 address fields to describe segments. */
} __rte_packed;
+static_assert(sizeof(struct rte_ipv6_routing_ext) == 8,
+ "sizeof(struct rte_ipv6_routing_ext) == 8");
+static_assert(alignof(struct rte_ipv6_routing_ext) == 2,
+ "alignof(struct rte_ipv6_routing_ext) == 2");
+
/* IPv6 vtc_flow: IPv / TC / flow_label */
#define RTE_IPV6_HDR_FL_SHIFT 0
#define RTE_IPV6_HDR_TC_SHIFT 20
@@ -783,13 +800,18 @@ rte_ipv6_udptcp_cksum_mbuf_verify(const struct rte_mbuf *m,
#define RTE_IPV6_SET_FRAG_DATA(fo, mf) \
(((fo) & RTE_IPV6_EHDR_FO_MASK) | ((mf) & RTE_IPV6_EHDR_MF_MASK))
-struct rte_ipv6_fragment_ext {
+struct __rte_aligned(2) rte_ipv6_fragment_ext {
uint8_t next_header; /**< Next header type */
uint8_t reserved; /**< Reserved */
rte_be16_t frag_data; /**< All fragmentation data */
rte_be32_t id; /**< Packet ID */
} __rte_packed;
+static_assert(sizeof(struct rte_ipv6_fragment_ext) == 8,
+ "sizeof(struct rte_ipv6_fragment_ext) == 8");
+static_assert(alignof(struct rte_ipv6_fragment_ext) == 2,
+ "alignof(struct rte_ipv6_fragment_ext) == 2");
+
/* IPv6 fragment extension header size */
#define RTE_IPV6_FRAG_HDR_SIZE sizeof(struct rte_ipv6_fragment_ext)
diff --git a/lib/net/rte_sctp.h b/lib/net/rte_sctp.h
index e757c57db3..3bc920a38f 100644
--- a/lib/net/rte_sctp.h
+++ b/lib/net/rte_sctp.h
@@ -14,6 +14,8 @@
#ifndef _RTE_SCTP_H_
#define _RTE_SCTP_H_
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#include <rte_byteorder.h>
@@ -21,11 +23,16 @@
/**
* SCTP Header
*/
-struct rte_sctp_hdr {
+struct __rte_aligned(2) rte_sctp_hdr {
rte_be16_t src_port; /**< Source port. */
rte_be16_t dst_port; /**< Destin port. */
rte_be32_t tag; /**< Validation tag. */
rte_be32_t cksum; /**< Checksum. */
} __rte_packed;
+static_assert(sizeof(struct rte_sctp_hdr) == 12,
+ "sizeof(struct rte_sctp_hdr) == 12");
+static_assert(alignof(struct rte_sctp_hdr) == 2,
+ "alignof(struct rte_sctp_hdr) == 2");
+
#endif /* RTE_SCTP_H_ */
diff --git a/lib/net/rte_tcp.h b/lib/net/rte_tcp.h
index 1bcacbf038..94ecdd2f9c 100644
--- a/lib/net/rte_tcp.h
+++ b/lib/net/rte_tcp.h
@@ -14,6 +14,8 @@
* TCP-related defines
*/
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#include <rte_byteorder.h>
@@ -21,7 +23,7 @@
/**
* TCP Header
*/
-struct rte_tcp_hdr {
+struct __rte_aligned(2) rte_tcp_hdr {
rte_be16_t src_port; /**< TCP source port. */
rte_be16_t dst_port; /**< TCP destination port. */
rte_be32_t sent_seq; /**< TX data sequence number. */
@@ -33,6 +35,11 @@ struct rte_tcp_hdr {
rte_be16_t tcp_urp; /**< TCP urgent pointer, if any. */
} __rte_packed;
+static_assert(sizeof(struct rte_tcp_hdr) == 20,
+ "sizeof(struct rte_tcp_hdr) == 20");
+static_assert(alignof(struct rte_tcp_hdr) == 2,
+ "alignof(struct rte_tcp_hdr) == 2");
+
/**
* TCP Flags
*/
diff --git a/lib/net/rte_udp.h b/lib/net/rte_udp.h
index c01dad9c9b..3a74d69c14 100644
--- a/lib/net/rte_udp.h
+++ b/lib/net/rte_udp.h
@@ -14,6 +14,8 @@
* UDP-related defines
*/
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#include <rte_byteorder.h>
@@ -21,11 +23,16 @@
/**
* UDP Header
*/
-struct rte_udp_hdr {
+struct /* native alignment: __rte_aligned(2) */ rte_udp_hdr {
rte_be16_t src_port; /**< UDP source port. */
rte_be16_t dst_port; /**< UDP destination port. */
rte_be16_t dgram_len; /**< UDP datagram length */
rte_be16_t dgram_cksum; /**< UDP datagram checksum */
-} __rte_packed;
+};
+
+static_assert(sizeof(struct rte_udp_hdr) == 8,
+ "sizeof(struct rte_udp_hdr) == 8");
+static_assert(alignof(struct rte_udp_hdr) == 2,
+ "alignof(struct rte_udp_hdr) == 2");
#endif /* RTE_UDP_H_ */
diff --git a/lib/net/rte_vxlan.h b/lib/net/rte_vxlan.h
index bd1c89835e..ca63bb4185 100644
--- a/lib/net/rte_vxlan.h
+++ b/lib/net/rte_vxlan.h
@@ -11,6 +11,8 @@
* VXLAN-related definitions
*/
+#include <assert.h>
+#include <stdalign.h>
#include <stdint.h>
#include <rte_byteorder.h>
@@ -27,7 +29,7 @@
* Reserved fields (24 bits and 8 bits)
*/
__extension__ /* no named member in struct */
-struct rte_vxlan_hdr {
+struct __rte_aligned(2) rte_vxlan_hdr {
union {
rte_be32_t vx_flags; /**< flags (8 bits) + extensions (24 bits). */
struct {
@@ -97,6 +99,11 @@ struct rte_vxlan_hdr {
}; /* end of 2nd 32-bit word */
} __rte_packed;
+static_assert(sizeof(struct rte_vxlan_hdr) == 8,
+ "sizeof(struct rte_vxlan_hdr) == 8");
+static_assert(alignof(struct rte_vxlan_hdr) == 2,
+ "alignof(struct rte_vxlan_hdr) == 2");
+
/** VXLAN tunnel header length. */
#define RTE_ETHER_VXLAN_HLEN \
(sizeof(struct rte_udp_hdr) + sizeof(struct rte_vxlan_hdr))
--
2.43.0
prev parent reply other threads:[~2024-10-11 16:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-11 13:19 [RFC PATCH] net: TEST " Morten Brørup
2024-10-11 16:06 ` Morten Brørup [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241011160653.88028-1-mb@smartsharesystems.com \
--to=mb@smartsharesystems.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).