[PATCH 2/4] net/hns3: support general tunnel flow match

[Jie Hai <haijie1@huawei.com>]

From: Chengwen Feng <fengchengwen@huawei.com>

In the current driver implementation, if you want to configure the same
action for all tunnel packets, you need to configure a rule for each
specific tunnel packet. e.g:

  flow create 0 ingress pattern ipv4 / udp / vxlan / end actions ...
  flow create 0 ingress pattern ipv4 / udp / vxlan-gpe / end actions ...
  flow create 0 ingress pattern ipv4 / udp / geneve / end actions ...
  flow create 0 ingress pattern ipv4 / nvgre / end actions ...
  flow create 0 ingress pattern ipv6 / udp / vxlan / end actions ...
  flow create 0 ingress pattern ipv6 / udp / vxlan-gpe / end actions ...
  flow create 0 ingress pattern ipv6 / udp / geneve / end actions ...
  flow create 0 ingress pattern ipv6 / nvgre / end actions ...

It occupies entry rule resources and is inconvenient to use.

The hardware supports 'tunnel packet' meta-data bit, this bit was set
when the hardware detects any type of supported tunnel packets.

This commit supports general tunnel match by identify
RTE_FLOW_ITEM_TYPE_PTYPE, and only support PTYPE_TUNNEL (0xf000). We
will treat it (0xf000) as a general tunnel, all tunnel types that
hardware recognized will match it.

After this commit, we could just create one rule per case:

  case1: match all tunnel packets
  rule1: flow create 0 ingress pattern ptype packet_type is 0xf000 /
         end actions ...

  case2: match all ipv4 tunnel packets
  rule2: flow create 0 ingress pattern ipv4 ptype packet_type is 0xf000
         / end actions ...

  case3: match all ipv6 tunnel packets
  rule3: flow create 0 ingress pattern ipv6 ptype packet_type is 0xf000
         / end actions ...

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Jie Hai <haijie1@huawei.com>
---
 doc/guides/nics/features/hns3.ini |  1 +
 drivers/net/hns3/hns3_flow.c      | 45 ++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 4 deletions(-)

diff --git a/doc/guides/nics/features/hns3.ini b/doc/guides/nics/features/hns3.ini
index 8b623d30778c..d4472f904bc1 100644
--- a/doc/guides/nics/features/hns3.ini
+++ b/doc/guides/nics/features/hns3.ini
@@ -59,6 +59,7 @@ icmp                 = Y
 ipv4                 = Y
 ipv6                 = Y
 nvgre                = Y
+ptype                = P
 sctp                 = Y
 tcp                  = Y
 udp                  = Y
diff --git a/drivers/net/hns3/hns3_flow.c b/drivers/net/hns3/hns3_flow.c
index e287420fb0f8..89ee2c6c6614 100644
--- a/drivers/net/hns3/hns3_flow.c
+++ b/drivers/net/hns3/hns3_flow.c
@@ -155,13 +155,15 @@ static enum rte_flow_item_type first_items[] = {
 	RTE_FLOW_ITEM_TYPE_NVGRE,
 	RTE_FLOW_ITEM_TYPE_VXLAN,
 	RTE_FLOW_ITEM_TYPE_GENEVE,
-	RTE_FLOW_ITEM_TYPE_VXLAN_GPE
+	RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
+	RTE_FLOW_ITEM_TYPE_PTYPE
 };
 
 static enum rte_flow_item_type L2_next_items[] = {
 	RTE_FLOW_ITEM_TYPE_VLAN,
 	RTE_FLOW_ITEM_TYPE_IPV4,
-	RTE_FLOW_ITEM_TYPE_IPV6
+	RTE_FLOW_ITEM_TYPE_IPV6,
+	RTE_FLOW_ITEM_TYPE_PTYPE
 };
 
 static enum rte_flow_item_type L3_next_items[] = {
@@ -169,7 +171,8 @@ static enum rte_flow_item_type L3_next_items[] = {
 	RTE_FLOW_ITEM_TYPE_UDP,
 	RTE_FLOW_ITEM_TYPE_SCTP,
 	RTE_FLOW_ITEM_TYPE_NVGRE,
-	RTE_FLOW_ITEM_TYPE_ICMP
+	RTE_FLOW_ITEM_TYPE_ICMP,
+	RTE_FLOW_ITEM_TYPE_PTYPE
 };
 
 static enum rte_flow_item_type L4_next_items[] = {
@@ -1204,6 +1207,32 @@ hns3_parse_geneve(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 	return 0;
 }
 
+static int
+hns3_parse_ptype(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
+		  struct rte_flow_error *error)
+{
+	const struct rte_flow_item_ptype *spec = item->spec;
+	const struct rte_flow_item_ptype *mask = item->mask;
+
+	if (spec == NULL || mask == NULL)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM, item,
+					  "PTYPE must set spec and mask at the same time!");
+
+	if (spec->packet_type != RTE_PTYPE_TUNNEL_MASK ||
+	    (mask->packet_type & RTE_PTYPE_TUNNEL_MASK) != RTE_PTYPE_TUNNEL_MASK)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM_MASK, item,
+					  "PTYPE only support general tunnel!");
+
+	/*
+	 * Set tunnel_type to non-zero, so that meta-data's tunnel packet bit
+	 * will be set, then hardware will match tunnel packet.
+	 */
+	rule->key_conf.spec.tunnel_type = 1;
+	return 0;
+}
+
 static int
 hns3_parse_tunnel(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 		  struct rte_flow_error *error)
@@ -1237,6 +1266,9 @@ hns3_parse_tunnel(const struct rte_flow_item *item, struct hns3_fdir_rule *rule,
 	case RTE_FLOW_ITEM_TYPE_GENEVE:
 		ret = hns3_parse_geneve(item, rule, error);
 		break;
+	case RTE_FLOW_ITEM_TYPE_PTYPE:
+		ret = hns3_parse_ptype(item, rule, error);
+		break;
 	default:
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM,
@@ -1336,7 +1368,12 @@ is_tunnel_packet(enum rte_flow_item_type type)
 	if (type == RTE_FLOW_ITEM_TYPE_VXLAN_GPE ||
 	    type == RTE_FLOW_ITEM_TYPE_VXLAN ||
 	    type == RTE_FLOW_ITEM_TYPE_NVGRE ||
-	    type == RTE_FLOW_ITEM_TYPE_GENEVE)
+	    type == RTE_FLOW_ITEM_TYPE_GENEVE ||
+	    /*
+	     * Here treat PTYPE as tunnel type because driver only support PTYPE_TUNNEL,
+	     * other PTYPE will return error in hns3_parse_ptype() later.
+	     */
+	    type == RTE_FLOW_ITEM_TYPE_PTYPE)
 		return true;
 	return false;
 }
-- 
2.22.0