From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 9C5FC45B90; Mon, 21 Oct 2024 13:53:44 +0200 (CEST) Received: from mails.dpdk.org (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 2225D4026B; Mon, 21 Oct 2024 13:53:44 +0200 (CEST) Received: from szxga04-in.huawei.com (szxga04-in.huawei.com [45.249.212.190]) by mails.dpdk.org (Postfix) with ESMTP id B87344021F for ; Mon, 21 Oct 2024 13:53:41 +0200 (CEST) Received: from mail.maildlp.com (unknown [172.19.88.163]) by szxga04-in.huawei.com (SkyGuard) with ESMTP id 4XXDFs4RCsz20qhD; Mon, 21 Oct 2024 19:52:49 +0800 (CST) Received: from kwepemm600004.china.huawei.com (unknown [7.193.23.242]) by mail.maildlp.com (Postfix) with ESMTPS id 3E7B818002B; Mon, 21 Oct 2024 19:53:39 +0800 (CST) Received: from localhost.localdomain (10.28.79.22) by kwepemm600004.china.huawei.com (7.193.23.242) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.1.2507.39; Mon, 21 Oct 2024 19:53:38 +0800 From: Huisong Li To: CC: , , , , , , , , , , , Subject: [PATCH v11 1/2] power: introduce PM QoS API on CPU wide Date: Mon, 21 Oct 2024 19:42:52 +0800 Message-ID: <20241021114253.31216-2-lihuisong@huawei.com> X-Mailer: git-send-email 2.22.0 In-Reply-To: <20241021114253.31216-1-lihuisong@huawei.com> References: <20240320105529.5626-1-lihuisong@huawei.com> <20241021114253.31216-1-lihuisong@huawei.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.28.79.22] X-ClientProxiedBy: dggems702-chm.china.huawei.com (10.3.19.179) To kwepemm600004.china.huawei.com (7.193.23.242) X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org The deeper the idle state, the lower the power consumption, but the longer the resume time. Some service are delay sensitive and very except the low resume time, like interrupt packet receiving mode. And the "/sys/devices/system/cpu/cpuX/power/pm_qos_resume_latency_us" sysfs interface is used to set and get the resume latency limit on the cpuX for userspace. Each cpuidle governor in Linux select which idle state to enter based on this CPU resume latency in their idle task. The per-CPU PM QoS API can be used to control this CPU's idle state selection and limit just enter the shallowest idle state to low the delay when wake up from by setting strict resume latency (zero value). Signed-off-by: Huisong Li Acked-by: Morten Brørup --- doc/guides/prog_guide/power_man.rst | 19 ++++ doc/guides/rel_notes/release_24_11.rst | 5 + lib/power/meson.build | 2 + lib/power/rte_power_qos.c | 123 +++++++++++++++++++++++++ lib/power/rte_power_qos.h | 73 +++++++++++++++ lib/power/version.map | 4 + 6 files changed, 226 insertions(+) create mode 100644 lib/power/rte_power_qos.c create mode 100644 lib/power/rte_power_qos.h diff --git a/doc/guides/prog_guide/power_man.rst b/doc/guides/prog_guide/power_man.rst index f6674efe2d..91358b04f3 100644 --- a/doc/guides/prog_guide/power_man.rst +++ b/doc/guides/prog_guide/power_man.rst @@ -107,6 +107,25 @@ User Cases The power management mechanism is used to save power when performing L3 forwarding. +PM QoS +------ + +The "/sys/devices/system/cpu/cpuX/power/pm_qos_resume_latency_us" sysfs +interface is used to set and get the resume latency limit on the cpuX for +userspace. Each cpuidle governor in Linux select which idle state to enter +based on this CPU resume latency in their idle task. + +The deeper the idle state, the lower the power consumption, but the longer +the resume time. Some service are latency sensitive and very except the low +resume time, like interrupt packet receiving mode. + +Applications can set and get the CPU resume latency by the +``rte_power_qos_set_cpu_resume_latency()`` and ``rte_power_qos_get_cpu_resume_latency()`` +respectively. Applications can set a strict resume latency (zero value) by +the ``rte_power_qos_set_cpu_resume_latency()`` to low the resume latency and +get better performance (instead, the power consumption of platform may increase). + + Ethernet PMD Power Management API --------------------------------- diff --git a/doc/guides/rel_notes/release_24_11.rst b/doc/guides/rel_notes/release_24_11.rst index fa4822d928..d9e268274b 100644 --- a/doc/guides/rel_notes/release_24_11.rst +++ b/doc/guides/rel_notes/release_24_11.rst @@ -237,6 +237,11 @@ New Features This field is used to pass an extra configuration settings such as ability to lookup IPv4 addresses in network byte order. +* **Introduce per-CPU PM QoS interface.** + + * Add per-CPU PM QoS interface to low the resume latency when wake up from + idle state. + * **Added new API to register telemetry endpoint callbacks with private arguments.** A new ``rte_telemetry_register_cmd_arg`` function is available to pass an opaque value to diff --git a/lib/power/meson.build b/lib/power/meson.build index 2f0f3d26e9..9b5d3e8315 100644 --- a/lib/power/meson.build +++ b/lib/power/meson.build @@ -23,12 +23,14 @@ sources = files( 'rte_power.c', 'rte_power_uncore.c', 'rte_power_pmd_mgmt.c', + 'rte_power_qos.c', ) headers = files( 'rte_power.h', 'rte_power_guest_channel.h', 'rte_power_pmd_mgmt.h', 'rte_power_uncore.h', + 'rte_power_qos.h', ) deps += ['timer', 'ethdev'] diff --git a/lib/power/rte_power_qos.c b/lib/power/rte_power_qos.c new file mode 100644 index 0000000000..09692b2161 --- /dev/null +++ b/lib/power/rte_power_qos.c @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2024 HiSilicon Limited + */ + +#include +#include +#include + +#include +#include + +#include "power_common.h" +#include "rte_power_qos.h" + +#define PM_QOS_SYSFILE_RESUME_LATENCY_US \ + "/sys/devices/system/cpu/cpu%u/power/pm_qos_resume_latency_us" + +#define PM_QOS_CPU_RESUME_LATENCY_BUF_LEN 32 + +int +rte_power_qos_set_cpu_resume_latency(uint16_t lcore_id, int latency) +{ + char buf[PM_QOS_CPU_RESUME_LATENCY_BUF_LEN]; + uint32_t cpu_id; + FILE *f; + int ret; + + if (!rte_lcore_is_enabled(lcore_id)) { + POWER_LOG(ERR, "lcore id %u is not enabled", lcore_id); + return -EINVAL; + } + ret = power_get_lcore_mapped_cpu_id(lcore_id, &cpu_id); + if (ret != 0) + return ret; + + if (latency < 0) { + POWER_LOG(ERR, "latency should be greater than and equal to 0"); + return -EINVAL; + } + + ret = open_core_sysfs_file(&f, "w", PM_QOS_SYSFILE_RESUME_LATENCY_US, cpu_id); + if (ret != 0) { + POWER_LOG(ERR, "Failed to open "PM_QOS_SYSFILE_RESUME_LATENCY_US" : %s", + cpu_id, strerror(errno)); + return ret; + } + + /* + * Based on the sysfs interface pm_qos_resume_latency_us under + * @PM_QOS_SYSFILE_RESUME_LATENCY_US directory in kernel, their meaning + * is as follows for different input string. + * 1> the resume latency is 0 if the input is "n/a". + * 2> the resume latency is no constraint if the input is "0". + * 3> the resume latency is the actual value to be set. + */ + if (latency == 0) + snprintf(buf, sizeof(buf), "%s", "n/a"); + else if (latency == RTE_POWER_QOS_RESUME_LATENCY_NO_CONSTRAINT) + snprintf(buf, sizeof(buf), "%u", 0); + else + snprintf(buf, sizeof(buf), "%u", latency); + + ret = write_core_sysfs_s(f, buf); + if (ret != 0) + POWER_LOG(ERR, "Failed to write "PM_QOS_SYSFILE_RESUME_LATENCY_US" : %s", + cpu_id, strerror(errno)); + + fclose(f); + + return ret; +} + +int +rte_power_qos_get_cpu_resume_latency(uint16_t lcore_id) +{ + char buf[PM_QOS_CPU_RESUME_LATENCY_BUF_LEN]; + int latency = -1; + uint32_t cpu_id; + FILE *f; + int ret; + + if (!rte_lcore_is_enabled(lcore_id)) { + POWER_LOG(ERR, "lcore id %u is not enabled", lcore_id); + return -EINVAL; + } + ret = power_get_lcore_mapped_cpu_id(lcore_id, &cpu_id); + if (ret != 0) + return ret; + + ret = open_core_sysfs_file(&f, "r", PM_QOS_SYSFILE_RESUME_LATENCY_US, cpu_id); + if (ret != 0) { + POWER_LOG(ERR, "Failed to open "PM_QOS_SYSFILE_RESUME_LATENCY_US" : %s", + cpu_id, strerror(errno)); + return ret; + } + + ret = read_core_sysfs_s(f, buf, sizeof(buf)); + if (ret != 0) { + POWER_LOG(ERR, "Failed to read "PM_QOS_SYSFILE_RESUME_LATENCY_US" : %s", + cpu_id, strerror(errno)); + goto out; + } + + /* + * Based on the sysfs interface pm_qos_resume_latency_us under + * @PM_QOS_SYSFILE_RESUME_LATENCY_US directory in kernel, their meaning + * is as follows for different output string. + * 1> the resume latency is 0 if the output is "n/a". + * 2> the resume latency is no constraint if the output is "0". + * 3> the resume latency is the actual value in used for other string. + */ + if (strcmp(buf, "n/a") == 0) + latency = 0; + else { + latency = strtoul(buf, NULL, 10); + latency = latency == 0 ? RTE_POWER_QOS_RESUME_LATENCY_NO_CONSTRAINT : latency; + } + +out: + fclose(f); + + return latency != -1 ? latency : ret; +} diff --git a/lib/power/rte_power_qos.h b/lib/power/rte_power_qos.h new file mode 100644 index 0000000000..990c488373 --- /dev/null +++ b/lib/power/rte_power_qos.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2024 HiSilicon Limited + */ + +#ifndef RTE_POWER_QOS_H +#define RTE_POWER_QOS_H + +#include + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @file rte_power_qos.h + * + * PM QoS API. + * + * The CPU-wide resume latency limit has a positive impact on this CPU's idle + * state selection in each cpuidle governor. + * Please see the PM QoS on CPU wide in the following link: + * https://www.kernel.org/doc/html/latest/admin-guide/abi-testing.html?highlight=pm_qos_resume_latency_us#abi-sys-devices-power-pm-qos-resume-latency-us + * + * The deeper the idle state, the lower the power consumption, but the + * longer the resume time. Some service are delay sensitive and very except the + * low resume time, like interrupt packet receiving mode. + * + * In these case, per-CPU PM QoS API can be used to control this CPU's idle + * state selection and limit just enter the shallowest idle state to low the + * delay after sleep by setting strict resume latency (zero value). + */ + +#define RTE_POWER_QOS_STRICT_LATENCY_VALUE 0 +#define RTE_POWER_QOS_RESUME_LATENCY_NO_CONSTRAINT ((int)(UINT32_MAX >> 1)) + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * @param lcore_id + * target logical core id + * + * @param latency + * The latency should be greater than and equal to zero in microseconds unit. + * + * @return + * 0 on success. Otherwise negative value is returned. + */ +__rte_experimental +int rte_power_qos_set_cpu_resume_latency(uint16_t lcore_id, int latency); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get the current resume latency of this logical core. + * The default value in kernel is @see RTE_POWER_QOS_RESUME_LATENCY_NO_CONSTRAINT + * if don't set it. + * + * @return + * Negative value on failure. + * >= 0 means the actual resume latency limit on this core. + */ +__rte_experimental +int rte_power_qos_get_cpu_resume_latency(uint16_t lcore_id); + +#ifdef __cplusplus +} +#endif + +#endif /* RTE_POWER_QOS_H */ diff --git a/lib/power/version.map b/lib/power/version.map index c9a226614e..08f178a39d 100644 --- a/lib/power/version.map +++ b/lib/power/version.map @@ -51,4 +51,8 @@ EXPERIMENTAL { rte_power_set_uncore_env; rte_power_uncore_freqs; rte_power_unset_uncore_env; + + # added in 24.11 + rte_power_qos_get_cpu_resume_latency; + rte_power_qos_set_cpu_resume_latency; }; -- 2.22.0