DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>, stable@dpdk.org
Subject: [PATCH 11/13] net/ngbe: reconfigure more MAC Rx registers
Date: Wed, 23 Oct 2024 14:48:34 +0800	[thread overview]
Message-ID: <20241023064836.2017879-12-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20241023064836.2017879-1-jiawenwu@trustnetic.com>

When link status changes, there is a probability that no more packets
can be received on the port, due to hardware defects. These MAC Rx
registers should be reconfigured to fix this problem.

Fixes: b9246b8fa280 ("net/ngbe: support link update")
Fixes: a7c5f95ed9c2 ("net/ngbe: reconfigure MAC Rx when link update")
Cc: stable@dpdk.org

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/ngbe/base/ngbe_regs.h | 2 ++
 drivers/net/ngbe/ngbe_ethdev.c    | 6 ++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ngbe/base/ngbe_regs.h b/drivers/net/ngbe/base/ngbe_regs.h
index 8a6776b0e6..b1295280a7 100644
--- a/drivers/net/ngbe/base/ngbe_regs.h
+++ b/drivers/net/ngbe/base/ngbe_regs.h
@@ -712,6 +712,8 @@ enum ngbe_5tuple_protocol {
 #define   NGBE_MACRXFLT_CTL_PASS       LS(3, 6, 0x3)
 #define   NGBE_MACRXFLT_RXALL          MS(31, 0x1)
 
+#define NGBE_MAC_WDG_TIMEOUT           0x01100C
+
 /******************************************************************************
  * Statistic Registers
  ******************************************************************************/
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index ba46dcf2a5..3ea7ed43ff 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -1934,6 +1934,7 @@ ngbe_dev_link_update_share(struct rte_eth_dev *dev,
 	bool link_up;
 	int err;
 	int wait = 1;
+	u32 reg;
 
 	memset(&link, 0, sizeof(link));
 	link.link_status = RTE_ETH_LINK_DOWN;
@@ -1991,8 +1992,13 @@ ngbe_dev_link_update_share(struct rte_eth_dev *dev,
 			wr32m(hw, NGBE_MACTXCFG, NGBE_MACTXCFG_SPEED_MASK,
 				NGBE_MACTXCFG_SPEED_1G | NGBE_MACTXCFG_TE);
 		}
+		/* Re configure MAC RX */
+		reg = rd32(hw, NGBE_MACRXCFG);
+		wr32(hw, NGBE_MACRXCFG, reg);
 		wr32m(hw, NGBE_MACRXFLT, NGBE_MACRXFLT_PROMISC,
 			NGBE_MACRXFLT_PROMISC);
+		reg = rd32(hw, NGBE_MAC_WDG_TIMEOUT);
+		wr32(hw, NGBE_MAC_WDG_TIMEOUT, reg);
 	}
 
 	return rte_eth_linkstatus_set(dev, &link);
-- 
2.27.0


  parent reply	other threads:[~2024-10-23  6:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-23  6:48 [PATCH 00/13] Wangxun fixes Jiawen Wu
2024-10-23  6:48 ` [PATCH 01/13] net/txgbe: fix swfw mbox failure Jiawen Wu
2024-10-23  6:48 ` [PATCH 02/13] net/txgbe: fix VF-PF mbox interrupt Jiawen Wu
2024-10-23  6:48 ` [PATCH 03/13] net/txgbe: remove outer UDP checksum capability Jiawen Wu
2024-10-23  6:48 ` [PATCH 04/13] net/txgbe: fix driver load bit to inform firmware Jiawen Wu
2024-10-23  6:48 ` [PATCH 05/13] net/txgbe: enable Tx descriptor error interrupt Jiawen Wu
2024-10-23  6:48 ` [PATCH 06/13] net/txgbe: check length of Tx packets Jiawen Wu
2024-10-23  6:48 ` [PATCH 07/13] net/txgbe: add Tx descriptor error statistics Jiawen Wu
2024-10-23  6:48 ` [PATCH 08/13] net/ngbe: check length of Tx packets Jiawen Wu
2024-10-23  6:48 ` [PATCH 09/13] net/ngbe: add Tx descriptor error statistics Jiawen Wu
2024-10-23  6:48 ` [PATCH 10/13] net/ngbe: fix driver load bit to inform firmware Jiawen Wu
2024-10-23  6:48 ` Jiawen Wu [this message]
2024-10-23  6:48 ` [PATCH 12/13] net/ngbe: fix interrupt lost in legacy or MSI mode Jiawen Wu
2024-10-23  6:48 ` [PATCH 13/13] net/ngbe: restrict configuration of VLAN strip offload Jiawen Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241023064836.2017879-12-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).