DPDK patches and discussions
 help / color / mirror / Atom feed
From: Junlong Wang <wang.junlong1@zte.com.cn>
To: dev@dpdk.org
Cc: wang.yong19@zte.com.cn, Junlong Wang <wang.junlong1@zte.com.cn>
Subject: [PATCH v8 3/9] net/zxdh: add zxdh device pci init implementation
Date: Wed, 30 Oct 2024 17:01:10 +0800	[thread overview]
Message-ID: <20241030090124.2540776-4-wang.junlong1@zte.com.cn> (raw)
In-Reply-To: <20241030090124.2540776-1-wang.junlong1@zte.com.cn>


[-- Attachment #1.1.1: Type: text/plain, Size: 22959 bytes --]

Add device pci init implementation,
to obtain PCI capability and read configuration, etc.

Signed-off-by: Junlong Wang <wang.junlong1@zte.com.cn>
---
 drivers/net/zxdh/meson.build   |   1 +
 drivers/net/zxdh/zxdh_ethdev.c |  43 +++++
 drivers/net/zxdh/zxdh_ethdev.h |  21 ++-
 drivers/net/zxdh/zxdh_pci.c    | 285 +++++++++++++++++++++++++++++++++
 drivers/net/zxdh/zxdh_pci.h    | 151 +++++++++++++++++
 drivers/net/zxdh/zxdh_queue.h  | 105 ++++++++++++
 drivers/net/zxdh/zxdh_rxtx.h   |  51 ++++++
 7 files changed, 655 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/zxdh/zxdh_pci.c
 create mode 100644 drivers/net/zxdh/zxdh_pci.h
 create mode 100644 drivers/net/zxdh/zxdh_queue.h
 create mode 100644 drivers/net/zxdh/zxdh_rxtx.h

diff --git a/drivers/net/zxdh/meson.build b/drivers/net/zxdh/meson.build
index 932fb1c835..7db4e7bc71 100644
--- a/drivers/net/zxdh/meson.build
+++ b/drivers/net/zxdh/meson.build
@@ -15,4 +15,5 @@ endif
 
 sources = files(
         'zxdh_ethdev.c',
+        'zxdh_pci.c',
 )
diff --git a/drivers/net/zxdh/zxdh_ethdev.c b/drivers/net/zxdh/zxdh_ethdev.c
index c911284423..8877855965 100644
--- a/drivers/net/zxdh/zxdh_ethdev.c
+++ b/drivers/net/zxdh/zxdh_ethdev.c
@@ -8,6 +8,40 @@
 
 #include "zxdh_ethdev.h"
 #include "zxdh_logs.h"
+#include "zxdh_pci.h"
+
+struct zxdh_hw_internal zxdh_hw_internal[RTE_MAX_ETHPORTS];
+
+static int32_t zxdh_init_device(struct rte_eth_dev *eth_dev)
+{
+	struct zxdh_hw *hw = eth_dev->data->dev_private;
+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+	int ret = 0;
+
+	ret = zxdh_read_pci_caps(pci_dev, hw);
+	if (ret) {
+		PMD_INIT_LOG(ERR, "port 0x%x pci caps read failed .", hw->port_id);
+		goto err;
+	}
+
+	zxdh_hw_internal[hw->port_id].zxdh_vtpci_ops = &zxdh_dev_pci_ops;
+	zxdh_vtpci_reset(hw);
+	zxdh_get_pci_dev_config(hw);
+
+	rte_ether_addr_copy((struct rte_ether_addr *)hw->mac_addr, &eth_dev->data->mac_addrs[0]);
+
+	/* If host does not support both status and MSI-X then disable LSC */
+	if (vtpci_with_feature(hw, ZXDH_NET_F_STATUS) && hw->use_msix != ZXDH_MSIX_NONE)
+		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
+	else
+		eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
+
+	return 0;
+
+err:
+	PMD_INIT_LOG(ERR, "port %d init device failed", eth_dev->data->port_id);
+	return ret;
+}
 
 static int zxdh_eth_dev_init(struct rte_eth_dev *eth_dev)
 {
@@ -45,6 +79,15 @@ static int zxdh_eth_dev_init(struct rte_eth_dev *eth_dev)
 		hw->is_pf = 1;
 	}
 
+	ret = zxdh_init_device(eth_dev);
+	if (ret < 0)
+		goto err_zxdh_init;
+
+	return ret;
+
+err_zxdh_init:
+	rte_free(eth_dev->data->mac_addrs);
+	eth_dev->data->mac_addrs = NULL;
 	return ret;
 }
 
diff --git a/drivers/net/zxdh/zxdh_ethdev.h b/drivers/net/zxdh/zxdh_ethdev.h
index 93375aea11..8be5af6aeb 100644
--- a/drivers/net/zxdh/zxdh_ethdev.h
+++ b/drivers/net/zxdh/zxdh_ethdev.h
@@ -5,6 +5,8 @@
 #ifndef ZXDH_ETHDEV_H
 #define ZXDH_ETHDEV_H
 
+#include <rte_ether.h>
+
 #include "ethdev_driver.h"
 
 #ifdef __cplusplus
@@ -24,15 +26,30 @@ extern "C" {
 #define ZXDH_MAX_MAC_ADDRS     (ZXDH_MAX_UC_MAC_ADDRS + ZXDH_MAX_MC_MAC_ADDRS)
 
 #define ZXDH_NUM_BARS          2
+#define ZXDH_RX_QUEUES_MAX     128U
+#define ZXDH_TX_QUEUES_MAX     128U
 
 struct zxdh_hw {
 	struct rte_eth_dev *eth_dev;
-	uint64_t bar_addr[ZXDH_NUM_BARS];
+	struct zxdh_pci_common_cfg *common_cfg;
+	struct zxdh_net_config *dev_cfg;
 
-	uint32_t  speed;
+	uint64_t bar_addr[ZXDH_NUM_BARS];
+	uint64_t host_features;
+	uint64_t guest_features;
+	uint32_t max_queue_pairs;
+	uint32_t speed;
+	uint32_t notify_off_multiplier;
+	uint16_t *notify_base;
+	uint16_t pcie_id;
 	uint16_t device_id;
 	uint16_t port_id;
 
+	uint8_t *isr;
+	uint8_t weak_barriers;
+	uint8_t use_msix;
+	uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
+
 	uint8_t duplex;
 	uint8_t is_pf;
 };
diff --git a/drivers/net/zxdh/zxdh_pci.c b/drivers/net/zxdh/zxdh_pci.c
new file mode 100644
index 0000000000..8fcab6e888
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_pci.c
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#include <stdint.h>
+#include <unistd.h>
+
+#include <rte_io.h>
+#include <rte_bus.h>
+#include <rte_pci.h>
+#include <rte_common.h>
+#include <rte_cycles.h>
+
+#include "zxdh_ethdev.h"
+#include "zxdh_pci.h"
+#include "zxdh_logs.h"
+#include "zxdh_queue.h"
+
+#define ZXDH_PMD_DEFAULT_GUEST_FEATURES   \
+	(1ULL << ZXDH_NET_F_MRG_RXBUF | \
+	 1ULL << ZXDH_NET_F_STATUS    | \
+	 1ULL << ZXDH_NET_F_MQ        | \
+	 1ULL << ZXDH_F_ANY_LAYOUT    | \
+	 1ULL << ZXDH_F_VERSION_1     | \
+	 1ULL << ZXDH_F_RING_PACKED   | \
+	 1ULL << ZXDH_F_IN_ORDER      | \
+	 1ULL << ZXDH_F_NOTIFICATION_DATA | \
+	 1ULL << ZXDH_NET_F_MAC)
+
+static void zxdh_read_dev_config(struct zxdh_hw *hw,
+								   size_t offset,
+								   void *dst,
+								   int32_t length)
+{
+	int32_t i       = 0;
+	uint8_t *p      = NULL;
+	uint8_t old_gen = 0;
+	uint8_t new_gen = 0;
+
+	do {
+		old_gen = rte_read8(&hw->common_cfg->config_generation);
+
+		p = dst;
+		for (i = 0;  i < length; i++)
+			*p++ = rte_read8((uint8_t *)hw->dev_cfg + offset + i);
+
+		new_gen = rte_read8(&hw->common_cfg->config_generation);
+	} while (old_gen != new_gen);
+}
+
+static void zxdh_write_dev_config(struct zxdh_hw *hw,
+									size_t offset,
+									const void *src,
+									int32_t length)
+{
+	int32_t i = 0;
+	const uint8_t *p = src;
+
+	for (i = 0;  i < length; i++)
+		rte_write8((*p++), (((uint8_t *)hw->dev_cfg) + offset + i));
+}
+
+static uint8_t zxdh_get_status(struct zxdh_hw *hw)
+{
+	return rte_read8(&hw->common_cfg->device_status);
+}
+
+static void zxdh_set_status(struct zxdh_hw *hw, uint8_t status)
+{
+	rte_write8(status, &hw->common_cfg->device_status);
+}
+
+static uint64_t zxdh_get_features(struct zxdh_hw *hw)
+{
+	uint32_t features_lo = 0;
+	uint32_t features_hi = 0;
+
+	rte_write32(0, &hw->common_cfg->device_feature_select);
+	features_lo = rte_read32(&hw->common_cfg->device_feature);
+
+	rte_write32(1, &hw->common_cfg->device_feature_select);
+	features_hi = rte_read32(&hw->common_cfg->device_feature);
+
+	return ((uint64_t)features_hi << 32) | features_lo;
+}
+
+static void zxdh_set_features(struct zxdh_hw *hw, uint64_t features)
+{
+	rte_write32(0, &hw->common_cfg->guest_feature_select);
+	rte_write32(features & ((1ULL << 32) - 1), &hw->common_cfg->guest_feature);
+	rte_write32(1, &hw->common_cfg->guest_feature_select);
+	rte_write32(features >> 32, &hw->common_cfg->guest_feature);
+}
+
+const struct zxdh_pci_ops zxdh_dev_pci_ops = {
+	.read_dev_cfg   = zxdh_read_dev_config,
+	.write_dev_cfg  = zxdh_write_dev_config,
+	.get_status     = zxdh_get_status,
+	.set_status     = zxdh_set_status,
+	.get_features   = zxdh_get_features,
+	.set_features   = zxdh_set_features,
+};
+
+uint16_t zxdh_vtpci_get_features(struct zxdh_hw *hw)
+{
+	return ZXDH_VTPCI_OPS(hw)->get_features(hw);
+}
+
+void zxdh_vtpci_reset(struct zxdh_hw *hw)
+{
+	PMD_INIT_LOG(INFO, "port %u device start reset, just wait...", hw->port_id);
+	uint32_t retry = 0;
+
+	ZXDH_VTPCI_OPS(hw)->set_status(hw, ZXDH_CONFIG_STATUS_RESET);
+	/* Flush status write and wait device ready max 3 seconds. */
+	while (ZXDH_VTPCI_OPS(hw)->get_status(hw) != ZXDH_CONFIG_STATUS_RESET) {
+		++retry;
+		rte_delay_ms(1);
+	}
+	PMD_INIT_LOG(INFO, "port %u device reset %u ms done", hw->port_id, retry);
+}
+
+static void *get_cfg_addr(struct rte_pci_device *dev, struct zxdh_pci_cap *cap)
+{
+	uint8_t  bar    = cap->bar;
+	uint32_t length = cap->length;
+	uint32_t offset = cap->offset;
+
+	if (bar >= PCI_MAX_RESOURCE) {
+		PMD_INIT_LOG(ERR, "invalid bar: %u", bar);
+		return NULL;
+	}
+	if (offset + length < offset) {
+		PMD_INIT_LOG(ERR, "offset(%u) + length(%u) overflows", offset, length);
+		return NULL;
+	}
+	if (offset + length > dev->mem_resource[bar].len) {
+		PMD_INIT_LOG(ERR, "invalid cap: overflows bar space");
+		return NULL;
+	}
+	uint8_t *base = dev->mem_resource[bar].addr;
+
+	if (base == NULL) {
+		PMD_INIT_LOG(ERR, "bar %u base addr is NULL", bar);
+		return NULL;
+	}
+	return base + offset;
+}
+
+int32_t zxdh_read_pci_caps(struct rte_pci_device *dev, struct zxdh_hw *hw)
+{
+	uint8_t pos = 0;
+	int32_t ret = 0;
+
+	if (dev->mem_resource[0].addr == NULL) {
+		PMD_INIT_LOG(ERR, "bar0 base addr is NULL");
+		return -1;
+	}
+
+	ret = rte_pci_read_config(dev, &pos, 1, ZXDH_PCI_CAPABILITY_LIST);
+
+	if (ret != 1) {
+		PMD_INIT_LOG(DEBUG, "failed to read pci capability list, ret %d", ret);
+		return -1;
+	}
+	while (pos) {
+		struct zxdh_pci_cap cap;
+
+		ret = rte_pci_read_config(dev, &cap, 2, pos);
+		if (ret != 2) {
+			PMD_INIT_LOG(DEBUG, "failed to read pci cap at pos: %x ret %d", pos, ret);
+			break;
+		}
+		if (cap.cap_vndr == ZXDH_PCI_CAP_ID_MSIX) {
+			/**
+			 * Transitional devices would also have this capability,
+			 * that's why we also check if msix is enabled.
+			 * 1st byte is cap ID; 2nd byte is the position of next cap;
+			 * next two bytes are the flags.
+			 */
+			uint16_t flags = 0;
+
+			ret = rte_pci_read_config(dev, &flags, sizeof(flags), pos + 2);
+			if (ret != sizeof(flags)) {
+				PMD_INIT_LOG(ERR, "failed to read pci cap at pos: %x ret %d",
+					pos + 2, ret);
+				break;
+			}
+			hw->use_msix = (flags & ZXDH_PCI_MSIX_ENABLE) ?
+					ZXDH_MSIX_ENABLED : ZXDH_MSIX_DISABLED;
+		}
+		if (cap.cap_vndr != ZXDH_PCI_CAP_ID_VNDR) {
+			PMD_INIT_LOG(DEBUG, "[%2x] skipping non VNDR cap id: %02x",
+				pos, cap.cap_vndr);
+			goto next;
+		}
+		ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+		if (ret != sizeof(cap)) {
+			PMD_INIT_LOG(ERR, "failed to read pci cap at pos: %x ret %d", pos, ret);
+			break;
+		}
+		PMD_INIT_LOG(DEBUG, "[%2x] cfg type: %u, bar: %u, offset: %04x, len: %u",
+			pos, cap.cfg_type, cap.bar, cap.offset, cap.length);
+		switch (cap.cfg_type) {
+		case ZXDH_PCI_CAP_COMMON_CFG:
+			hw->common_cfg = get_cfg_addr(dev, &cap);
+			break;
+		case ZXDH_PCI_CAP_NOTIFY_CFG: {
+			ret = rte_pci_read_config(dev, &hw->notify_off_multiplier,
+						4, pos + sizeof(cap));
+			if (ret != 4)
+				PMD_INIT_LOG(ERR,
+					"failed to read notify_off_multiplier, ret %d", ret);
+			else
+				hw->notify_base = get_cfg_addr(dev, &cap);
+			break;
+		}
+		case ZXDH_PCI_CAP_DEVICE_CFG:
+			hw->dev_cfg = get_cfg_addr(dev, &cap);
+			break;
+		case ZXDH_PCI_CAP_ISR_CFG:
+			hw->isr = get_cfg_addr(dev, &cap);
+			break;
+		case ZXDH_PCI_CAP_PCI_CFG: {
+			hw->pcie_id = *(uint16_t *)&cap.padding[1];
+			PMD_INIT_LOG(DEBUG, "get pcie id 0x%x", hw->pcie_id);
+			uint16_t pcie_id = hw->pcie_id;
+
+			if ((pcie_id >> 11) & 0x1) /* PF */ {
+				PMD_INIT_LOG(DEBUG, "EP %u PF %u",
+					pcie_id >> 12, (pcie_id >> 8) & 0x7);
+			} else { /* VF */
+				PMD_INIT_LOG(DEBUG, "EP %u PF %u VF %u",
+					pcie_id >> 12, (pcie_id >> 8) & 0x7, pcie_id & 0xff);
+			}
+			break;
+		}
+		}
+next:
+	pos = cap.cap_next;
+	}
+	if (hw->common_cfg == NULL || hw->notify_base == NULL ||
+		hw->dev_cfg == NULL || hw->isr == NULL) {
+		PMD_INIT_LOG(ERR, "no zxdh pci device found.");
+		return -1;
+	}
+	return 0;
+}
+
+void zxdh_vtpci_read_dev_config(struct zxdh_hw *hw, size_t offset, void *dst, int32_t length)
+{
+	ZXDH_VTPCI_OPS(hw)->read_dev_cfg(hw, offset, dst, length);
+}
+
+int32_t zxdh_get_pci_dev_config(struct zxdh_hw *hw)
+{
+	uint64_t guest_features = 0;
+	uint64_t nego_features = 0;
+	uint32_t max_queue_pairs = 0;
+
+	hw->host_features = zxdh_vtpci_get_features(hw);
+
+	guest_features = (uint64_t)ZXDH_PMD_DEFAULT_GUEST_FEATURES;
+	nego_features = guest_features & hw->host_features;
+
+	hw->guest_features = nego_features;
+
+	if (hw->guest_features & (1ULL << ZXDH_NET_F_MAC)) {
+		zxdh_vtpci_read_dev_config(hw, offsetof(struct zxdh_net_config, mac),
+				&hw->mac_addr, RTE_ETHER_ADDR_LEN);
+	} else {
+		rte_eth_random_addr(&hw->mac_addr[0]);
+	}
+
+	zxdh_vtpci_read_dev_config(hw, offsetof(struct zxdh_net_config, max_virtqueue_pairs),
+			&max_queue_pairs, sizeof(max_queue_pairs));
+
+	if (max_queue_pairs == 0)
+		hw->max_queue_pairs = ZXDH_RX_QUEUES_MAX;
+	else
+		hw->max_queue_pairs = RTE_MIN(ZXDH_RX_QUEUES_MAX, max_queue_pairs);
+	PMD_INIT_LOG(DEBUG, "set max queue pairs %d", hw->max_queue_pairs);
+
+	return 0;
+}
diff --git a/drivers/net/zxdh/zxdh_pci.h b/drivers/net/zxdh/zxdh_pci.h
new file mode 100644
index 0000000000..bb5ae64ddf
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_pci.h
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#ifndef ZXDH_PCI_H
+#define ZXDH_PCI_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <bus_pci_driver.h>
+
+#include "zxdh_ethdev.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum zxdh_msix_status {
+	ZXDH_MSIX_NONE     = 0,
+	ZXDH_MSIX_DISABLED = 1,
+	ZXDH_MSIX_ENABLED  = 2
+};
+
+#define ZXDH_PCI_CAPABILITY_LIST          0x34
+#define ZXDH_PCI_CAP_ID_VNDR              0x09
+#define ZXDH_PCI_CAP_ID_MSIX              0x11
+
+#define ZXDH_PCI_MSIX_ENABLE              0x8000
+
+#define ZXDH_NET_F_MAC               5   /* Host has given MAC address. */
+#define ZXDH_NET_F_MRG_RXBUF         15  /* Host can merge receive buffers. */
+#define ZXDH_NET_F_STATUS            16  /* zxdh_net_config.status available */
+#define ZXDH_NET_F_MQ                22  /* Device supports Receive Flow Steering */
+#define ZXDH_F_ANY_LAYOUT            27 /* Can the device handle any descriptor layout */
+#define ZXDH_F_VERSION_1             32
+#define ZXDH_F_RING_PACKED           34
+#define ZXDH_F_IN_ORDER              35
+#define ZXDH_F_NOTIFICATION_DATA     38
+
+#define ZXDH_PCI_CAP_COMMON_CFG  1 /* Common configuration */
+#define ZXDH_PCI_CAP_NOTIFY_CFG  2 /* Notifications */
+#define ZXDH_PCI_CAP_ISR_CFG     3 /* ISR Status */
+#define ZXDH_PCI_CAP_DEVICE_CFG  4 /* Device specific configuration */
+#define ZXDH_PCI_CAP_PCI_CFG     5 /* PCI configuration access */
+
+/* Status byte for guest to report progress. */
+#define ZXDH_CONFIG_STATUS_RESET           0x00
+#define ZXDH_CONFIG_STATUS_ACK             0x01
+#define ZXDH_CONFIG_STATUS_DRIVER          0x02
+#define ZXDH_CONFIG_STATUS_DRIVER_OK       0x04
+#define ZXDH_CONFIG_STATUS_FEATURES_OK     0x08
+#define ZXDH_CONFIG_STATUS_DEV_NEED_RESET  0x40
+#define ZXDH_CONFIG_STATUS_FAILED          0x80
+
+struct zxdh_net_config {
+	/* The config defining mac address (if ZXDH_NET_F_MAC) */
+	uint8_t    mac[RTE_ETHER_ADDR_LEN];
+	/* See ZXDH_NET_F_STATUS and ZXDH_NET_S_* above */
+	uint16_t   status;
+	uint16_t   max_virtqueue_pairs;
+	uint16_t   mtu;
+	/*
+	 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+	 * Any other value stands for unknown.
+	 */
+	uint32_t   speed;
+	/* 0x00 - half duplex
+	 * 0x01 - full duplex
+	 * Any other value stands for unknown.
+	 */
+	uint8_t    duplex;
+} __rte_packed;
+
+/* This is the PCI capability header: */
+struct zxdh_pci_cap {
+	uint8_t  cap_vndr;   /* Generic PCI field: PCI_CAP_ID_VNDR */
+	uint8_t  cap_next;   /* Generic PCI field: next ptr. */
+	uint8_t  cap_len;    /* Generic PCI field: capability length */
+	uint8_t  cfg_type;   /* Identifies the structure. */
+	uint8_t  bar;        /* Where to find it. */
+	uint8_t  padding[3]; /* Pad to full dword. */
+	uint32_t offset;     /* Offset within bar. */
+	uint32_t length;     /* Length of the structure, in bytes. */
+};
+
+/* Fields in ZXDH_PCI_CAP_COMMON_CFG: */
+struct zxdh_pci_common_cfg {
+	/* About the whole device. */
+	uint32_t device_feature_select; /* read-write */
+	uint32_t device_feature;    /* read-only */
+	uint32_t guest_feature_select;  /* read-write */
+	uint32_t guest_feature;     /* read-write */
+	uint16_t msix_config;       /* read-write */
+	uint16_t num_queues;        /* read-only */
+	uint8_t  device_status;     /* read-write */
+	uint8_t  config_generation; /* read-only */
+
+	/* About a specific virtqueue. */
+	uint16_t queue_select;      /* read-write */
+	uint16_t queue_size;        /* read-write, power of 2. */
+	uint16_t queue_msix_vector; /* read-write */
+	uint16_t queue_enable;      /* read-write */
+	uint16_t queue_notify_off;  /* read-only */
+	uint32_t queue_desc_lo;     /* read-write */
+	uint32_t queue_desc_hi;     /* read-write */
+	uint32_t queue_avail_lo;    /* read-write */
+	uint32_t queue_avail_hi;    /* read-write */
+	uint32_t queue_used_lo;     /* read-write */
+	uint32_t queue_used_hi;     /* read-write */
+};
+
+static inline int32_t vtpci_with_feature(struct zxdh_hw *hw, uint64_t bit)
+{
+	return (hw->guest_features & (1ULL << bit)) != 0;
+}
+
+struct zxdh_pci_ops {
+	void     (*read_dev_cfg)(struct zxdh_hw *hw, size_t offset, void *dst, int32_t len);
+	void     (*write_dev_cfg)(struct zxdh_hw *hw, size_t offset, const void *src, int32_t len);
+
+	uint8_t  (*get_status)(struct zxdh_hw *hw);
+	void     (*set_status)(struct zxdh_hw *hw, uint8_t status);
+
+	uint64_t (*get_features)(struct zxdh_hw *hw);
+	void     (*set_features)(struct zxdh_hw *hw, uint64_t features);
+};
+
+struct zxdh_hw_internal {
+	const struct zxdh_pci_ops *zxdh_vtpci_ops;
+};
+
+#define ZXDH_VTPCI_OPS(hw)  (zxdh_hw_internal[(hw)->port_id].zxdh_vtpci_ops)
+
+extern struct zxdh_hw_internal zxdh_hw_internal[RTE_MAX_ETHPORTS];
+extern const struct zxdh_pci_ops zxdh_dev_pci_ops;
+
+void zxdh_vtpci_reset(struct zxdh_hw *hw);
+void zxdh_vtpci_read_dev_config(struct zxdh_hw *hw, size_t offset,
+		void *dst, int32_t length);
+
+int32_t zxdh_read_pci_caps(struct rte_pci_device *dev, struct zxdh_hw *hw);
+int32_t zxdh_get_pci_dev_config(struct zxdh_hw *hw);
+
+uint16_t zxdh_vtpci_get_features(struct zxdh_hw *hw);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZXDH_PCI_H */
diff --git a/drivers/net/zxdh/zxdh_queue.h b/drivers/net/zxdh/zxdh_queue.h
new file mode 100644
index 0000000000..fd73f14e2d
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_queue.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#ifndef ZXDH_QUEUE_H
+#define ZXDH_QUEUE_H
+
+#include <stdint.h>
+
+#include <rte_common.h>
+
+#include "zxdh_ethdev.h"
+#include "zxdh_rxtx.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** ring descriptors: 16 bytes.
+ * These can chain together via "next".
+ **/
+struct zxdh_vring_desc {
+	uint64_t addr;  /*  Address (guest-physical). */
+	uint32_t len;   /* Length. */
+	uint16_t flags; /* The flags as indicated above. */
+	uint16_t next;  /* We chain unused descriptors via this. */
+} __rte_packed;
+
+struct zxdh_vring_avail {
+	uint16_t flags;
+	uint16_t idx;
+	uint16_t ring[];
+} __rte_packed;
+
+struct zxdh_vring_packed_desc {
+	uint64_t addr;
+	uint32_t len;
+	uint16_t id;
+	uint16_t flags;
+} __rte_packed;
+
+struct zxdh_vring_packed_desc_event {
+	uint16_t desc_event_off_wrap;
+	uint16_t desc_event_flags;
+} __rte_packed;
+
+struct zxdh_vring_packed {
+	uint32_t num;
+	struct zxdh_vring_packed_desc *desc;
+	struct zxdh_vring_packed_desc_event *driver;
+	struct zxdh_vring_packed_desc_event *device;
+} __rte_packed;
+
+struct zxdh_vq_desc_extra {
+	void *cookie;
+	uint16_t ndescs;
+	uint16_t next;
+} __rte_packed;
+
+struct zxdh_virtqueue {
+	struct zxdh_hw  *hw; /**< zxdh_hw structure pointer. */
+	struct {
+		/**< vring keeping descs and events */
+		struct zxdh_vring_packed ring;
+		uint8_t used_wrap_counter;
+		uint8_t rsv;
+		uint16_t cached_flags; /**< cached flags for descs */
+		uint16_t event_flags_shadow;
+		uint16_t rsv1;
+	} __rte_packed vq_packed;
+	uint16_t vq_used_cons_idx; /**< last consumed descriptor */
+	uint16_t vq_nentries;  /**< vring desc numbers */
+	uint16_t vq_free_cnt;  /**< num of desc available */
+	uint16_t vq_avail_idx; /**< sync until needed */
+	uint16_t vq_free_thresh; /**< free threshold */
+	uint16_t rsv2;
+
+	void *vq_ring_virt_mem;  /**< linear address of vring*/
+	uint32_t vq_ring_size;
+
+	union {
+		struct zxdh_virtnet_rx rxq;
+		struct zxdh_virtnet_tx txq;
+	};
+
+	/** < physical address of vring,
+	 * or virtual address for virtio_user.
+	 **/
+	rte_iova_t vq_ring_mem;
+
+	/**
+	 * Head of the free chain in the descriptor table. If
+	 * there are no free descriptors, this will be set to
+	 * VQ_RING_DESC_CHAIN_END.
+	 **/
+	uint16_t  vq_desc_head_idx;
+	uint16_t  vq_desc_tail_idx;
+	uint16_t  vq_queue_index;   /**< PCI queue index */
+	uint16_t  offset; /**< relative offset to obtain addr in mbuf */
+	uint16_t *notify_addr;
+	struct rte_mbuf **sw_ring;  /**< RX software ring. */
+	struct zxdh_vq_desc_extra vq_descx[];
+} __rte_packed;
+
+#endif /* ZXDH_QUEUE_H */
diff --git a/drivers/net/zxdh/zxdh_rxtx.h b/drivers/net/zxdh/zxdh_rxtx.h
new file mode 100644
index 0000000000..ccac7e7834
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_rxtx.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#ifndef ZXDH_RXTX_H
+#define ZXDH_RXTX_H
+
+#include <stdint.h>
+
+#include <rte_common.h>
+#include <rte_mbuf_core.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct zxdh_virtnet_stats {
+	uint64_t packets;
+	uint64_t bytes;
+	uint64_t errors;
+	uint64_t multicast;
+	uint64_t broadcast;
+	uint64_t truncated_err;
+	uint64_t size_bins[8];
+};
+
+struct zxdh_virtnet_rx {
+	struct zxdh_virtqueue         *vq;
+
+	/* dummy mbuf, for wraparound when processing RX ring. */
+	struct rte_mbuf           fake_mbuf;
+
+	uint64_t                  mbuf_initializer; /* value to init mbufs. */
+	struct rte_mempool       *mpool;            /* mempool for mbuf allocation */
+	uint16_t                  queue_id;         /* DPDK queue index. */
+	uint16_t                  port_id;          /* Device port identifier. */
+	struct zxdh_virtnet_stats      stats;
+	const struct rte_memzone *mz;               /* mem zone to populate RX ring. */
+} __rte_packed;
+
+struct zxdh_virtnet_tx {
+	struct zxdh_virtqueue         *vq;
+	const struct rte_memzone *virtio_net_hdr_mz;  /* memzone to populate hdr. */
+	rte_iova_t                virtio_net_hdr_mem; /* hdr for each xmit packet */
+	uint16_t                  queue_id;           /* DPDK queue index. */
+	uint16_t                  port_id;            /* Device port identifier. */
+	struct zxdh_virtnet_stats      stats;
+	const struct rte_memzone *mz;                 /* mem zone to populate TX ring. */
+} __rte_packed;
+
+#endif  /* ZXDH_RXTX_H */
-- 
2.27.0

[-- Attachment #1.1.2: Type: text/html , Size: 53777 bytes --]

  parent reply	other threads:[~2024-10-30  9:06 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-10 12:00 [PATCH v4] net/zxdh: Provided zxdh basic init Junlong Wang
2024-09-24  1:35 ` [v4] " Junlong Wang
2024-09-25 22:39 ` [PATCH v4] " Ferruh Yigit
2024-09-26  6:49 ` [v4] " Junlong Wang
2024-10-07 21:43 ` [PATCH v4] " Stephen Hemminger
2024-10-15  5:43 ` [PATCH v5 0/9] net/zxdh: introduce net zxdh driver Junlong Wang
2024-10-15  5:43   ` [PATCH v5 1/9] net/zxdh: add zxdh ethdev pmd driver Junlong Wang
2024-10-15  5:44     ` [PATCH v5 2/9] net/zxdh: add logging implementation Junlong Wang
2024-10-15  5:44       ` [PATCH v5 3/9] net/zxdh: add zxdh device pci init implementation Junlong Wang
2024-10-15  5:44       ` [PATCH v5 4/9] net/zxdh: add msg chan and msg hwlock init Junlong Wang
2024-10-15  5:44       ` [PATCH v5 5/9] net/zxdh: add msg chan enable implementation Junlong Wang
2024-10-15  5:44       ` [PATCH v5 6/9] net/zxdh: add zxdh get device backend infos Junlong Wang
2024-10-15  5:44       ` [PATCH v5 7/9] net/zxdh: add configure zxdh intr implementation Junlong Wang
2024-10-15  5:44       ` [PATCH v5 8/9] net/zxdh: add zxdh dev infos get ops Junlong Wang
2024-10-15  5:44       ` [PATCH v5 9/9] net/zxdh: add zxdh dev configure ops Junlong Wang
2024-10-15 15:37         ` Stephen Hemminger
2024-10-15 15:57         ` Stephen Hemminger
2024-10-16  8:16     ` [PATCH v6 0/9] net/zxdh: introduce net zxdh driver Junlong Wang
2024-10-16  8:16       ` [PATCH v6 1/9] net/zxdh: add zxdh ethdev pmd driver Junlong Wang
2024-10-16  8:18         ` [PATCH v6 2/9] net/zxdh: add logging implementation Junlong Wang
2024-10-16  8:18           ` [PATCH v6 3/9] net/zxdh: add zxdh device pci init implementation Junlong Wang
2024-10-16  8:18           ` [PATCH v6 4/9] net/zxdh: add msg chan and msg hwlock init Junlong Wang
2024-10-16  8:18           ` [PATCH v6 5/9] net/zxdh: add msg chan enable implementation Junlong Wang
2024-10-21  8:50             ` Thomas Monjalon
2024-10-21 10:56             ` Junlong Wang
2024-10-16  8:18           ` [PATCH v6 6/9] net/zxdh: add zxdh get device backend infos Junlong Wang
2024-10-21  8:52             ` Thomas Monjalon
2024-10-16  8:18           ` [PATCH v6 7/9] net/zxdh: add configure zxdh intr implementation Junlong Wang
2024-10-16  8:18           ` [PATCH v6 8/9] net/zxdh: add zxdh dev infos get ops Junlong Wang
2024-10-21  8:54             ` Thomas Monjalon
2024-10-16  8:18           ` [PATCH v6 9/9] net/zxdh: add zxdh dev configure ops Junlong Wang
2024-10-18  5:18             ` [v6,9/9] " Junlong Wang
2024-10-18  6:48               ` David Marchand
2024-10-19 11:17             ` Junlong Wang
2024-10-21  9:03         ` [PATCH v6 1/9] net/zxdh: add zxdh ethdev pmd driver Thomas Monjalon
2024-10-22 12:20         ` [PATCH v7 0/9] net/zxdh: introduce net zxdh driver Junlong Wang
2024-10-22 12:20           ` [PATCH v7 1/9] net/zxdh: add zxdh ethdev pmd driver Junlong Wang
2024-10-30  9:01             ` [PATCH v8 0/9] net/zxdh: introduce net zxdh driver Junlong Wang
2024-10-30  9:01               ` [PATCH v8 1/9] net/zxdh: add zxdh ethdev pmd driver Junlong Wang
2024-10-30  9:01               ` [PATCH v8 2/9] net/zxdh: add logging implementation Junlong Wang
2024-10-30  9:01               ` Junlong Wang [this message]
2024-10-30  9:01               ` [PATCH v8 4/9] net/zxdh: add msg chan and msg hwlock init Junlong Wang
2024-10-30  9:01               ` [PATCH v8 5/9] net/zxdh: add msg chan enable implementation Junlong Wang
2024-10-30  9:01               ` [PATCH v8 6/9] net/zxdh: add zxdh get device backend infos Junlong Wang
2024-10-30  9:01               ` [PATCH v8 7/9] net/zxdh: add configure zxdh intr implementation Junlong Wang
2024-10-30  9:01               ` [PATCH v8 8/9] net/zxdh: add zxdh dev infos get ops Junlong Wang
2024-10-30  9:01               ` [PATCH v8 9/9] net/zxdh: add zxdh dev configure ops Junlong Wang
2024-10-22 12:20           ` [PATCH v7 2/9] net/zxdh: add logging implementation Junlong Wang
2024-10-22 12:20           ` [PATCH v7 3/9] net/zxdh: add zxdh device pci init implementation Junlong Wang
2024-10-27 16:47             ` Stephen Hemminger
2024-10-27 16:47             ` Stephen Hemminger
2024-10-22 12:20           ` [PATCH v7 4/9] net/zxdh: add msg chan and msg hwlock init Junlong Wang
2024-10-22 12:20           ` [PATCH v7 5/9] net/zxdh: add msg chan enable implementation Junlong Wang
2024-10-26 17:05             ` Thomas Monjalon
2024-10-22 12:20           ` [PATCH v7 6/9] net/zxdh: add zxdh get device backend infos Junlong Wang
2024-10-22 12:20           ` [PATCH v7 7/9] net/zxdh: add configure zxdh intr implementation Junlong Wang
2024-10-27 17:07             ` Stephen Hemminger
2024-10-22 12:20           ` [PATCH v7 8/9] net/zxdh: add zxdh dev infos get ops Junlong Wang
2024-10-22 12:20           ` [PATCH v7 9/9] net/zxdh: add zxdh dev configure ops Junlong Wang
2024-10-24 11:31             ` [v7,9/9] " Junlong Wang
2024-10-25  9:48             ` Junlong Wang
2024-10-26  2:32             ` Junlong Wang
2024-10-27 16:40             ` [PATCH v7 9/9] " Stephen Hemminger
2024-10-27 17:03               ` Stephen Hemminger
2024-10-27 16:58             ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241030090124.2540776-4-wang.junlong1@zte.com.cn \
    --to=wang.junlong1@zte.com.cn \
    --cc=dev@dpdk.org \
    --cc=wang.yong19@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).