Add basic zxdh ethdev init and register PCI probe functions
Update doc files.
Signed-off-by: Junlong Wang <wang.junlong1@zte.com.cn>
---
MAINTAINERS | 6 ++
doc/guides/nics/features/zxdh.ini | 9 +++
doc/guides/nics/index.rst | 1 +
doc/guides/nics/zxdh.rst | 31 +++++++++
doc/guides/rel_notes/release_24_11.rst | 4 ++
drivers/net/meson.build | 1 +
drivers/net/zxdh/meson.build | 18 +++++
drivers/net/zxdh/zxdh_ethdev.c | 92 ++++++++++++++++++++++++++
drivers/net/zxdh/zxdh_ethdev.h | 44 ++++++++++++
9 files changed, 206 insertions(+)
create mode 100644 doc/guides/nics/features/zxdh.ini
create mode 100644 doc/guides/nics/zxdh.rst
create mode 100644 drivers/net/zxdh/meson.build
create mode 100644 drivers/net/zxdh/zxdh_ethdev.c
create mode 100644 drivers/net/zxdh/zxdh_ethdev.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 8919d78919..a5534be2ab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1051,6 +1051,12 @@ F: drivers/net/virtio/
F: doc/guides/nics/virtio.rst
F: doc/guides/nics/features/virtio*.ini
+ZTE zxdh
+M: Lijie Shan <shan.lijie@zte.com.cn>
+F: drivers/net/zxdh/
+F: doc/guides/nics/zxdh.rst
+F: doc/guides/nics/features/zxdh.ini
+
Wind River AVP
M: Steven Webster <steven.webster@windriver.com>
M: Matt Peters <matt.peters@windriver.com>
diff --git a/doc/guides/nics/features/zxdh.ini b/doc/guides/nics/features/zxdh.ini
new file mode 100644
index 0000000000..05c8091ed7
--- /dev/null
+++ b/doc/guides/nics/features/zxdh.ini
@@ -0,0 +1,9 @@
+;
+; Supported features of the 'zxdh' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux = Y
+x86-64 = Y
+ARMv8 = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index c14bc7988a..8e371ac4a5 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -69,3 +69,4 @@ Network Interface Controller Drivers
vhost
virtio
vmxnet3
+ zxdh
diff --git a/doc/guides/nics/zxdh.rst b/doc/guides/nics/zxdh.rst
new file mode 100644
index 0000000000..920ff5175e
--- /dev/null
+++ b/doc/guides/nics/zxdh.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2024 ZTE Corporation.
+
+ZXDH Poll Mode Driver
+======================
+
+The ZXDH PMD (**librte_net_zxdh**) provides poll mode driver support
+for 25/100 Gbps ZXDH NX Series Ethernet Controller based on
+the ZTE Ethernet Controller E310/E312.
+
+- Learn about ZXDH NX Series Ethernet Controller NICs using
+ `<https://enterprise.zte.com.cn/sup-detail.html?id=271&suptype=1>`_.
+
+Features
+--------
+
+Features of the ZXDH PMD are:
+
+- Multi arch support: x86_64, ARMv8.
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+Limitations or Known issues
+---------------------------
+
+X86-32, Power8, ARMv7, RISC-V, Windows and BSD are not supported yet.
diff --git a/doc/guides/rel_notes/release_24_11.rst b/doc/guides/rel_notes/release_24_11.rst
index 15b64a1829..dd9048d561 100644
--- a/doc/guides/rel_notes/release_24_11.rst
+++ b/doc/guides/rel_notes/release_24_11.rst
@@ -162,6 +162,10 @@ New Features
* Added initialization of FPGA modules related to flow HW offload.
* Added basic handling of the virtual queues.
+* **Updated ZTE zxdh net driver.**
+
+ * Added ethdev driver support for zxdh NX Series Ethernet Controller.
+
* **Added cryptodev queue pair reset support.**
A new API ``rte_cryptodev_queue_pair_reset`` is added
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index fb6d34b782..0a12914534 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -62,6 +62,7 @@ drivers = [
'vhost',
'virtio',
'vmxnet3',
+ 'zxdh',
]
std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std
diff --git a/drivers/net/zxdh/meson.build b/drivers/net/zxdh/meson.build
new file mode 100644
index 0000000000..932fb1c835
--- /dev/null
+++ b/drivers/net/zxdh/meson.build
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2024 ZTE Corporation
+
+if not is_linux
+ build = false
+ reason = 'only supported on Linux'
+ subdir_done()
+endif
+
+if not dpdk_conf.has('RTE_ARCH_X86_64') or not dpdk_conf.get('RTE_ARCH_64')
+ build = false
+ reason = 'only supported on x86_64 and aarch64'
+ subdir_done()
+endif
+
+sources = files(
+ 'zxdh_ethdev.c',
+)
diff --git a/drivers/net/zxdh/zxdh_ethdev.c b/drivers/net/zxdh/zxdh_ethdev.c
new file mode 100644
index 0000000000..5b6c9ec1bf
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_ethdev.c
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#include <ethdev_pci.h>
+#include <bus_pci_driver.h>
+#include <rte_ethdev.h>
+
+#include "zxdh_ethdev.h"
+
+static int zxdh_eth_dev_init(struct rte_eth_dev *eth_dev)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ struct zxdh_hw *hw = eth_dev->data->dev_private;
+ int ret = 0;
+
+ eth_dev->dev_ops = NULL;
+
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("zxdh_mac",
+ ZXDH_MAX_MAC_ADDRS * RTE_ETHER_ADDR_LEN, 0);
+ if (eth_dev->data->mac_addrs == NULL)
+ return -ENOMEM;
+
+ memset(hw, 0, sizeof(*hw));
+ hw->bar_addr[0] = (uint64_t)pci_dev->mem_resource[0].addr;
+ if (hw->bar_addr[0] == 0)
+ return -EIO;
+
+ hw->device_id = pci_dev->id.device_id;
+ hw->port_id = eth_dev->data->port_id;
+ hw->eth_dev = eth_dev;
+ hw->speed = RTE_ETH_SPEED_NUM_UNKNOWN;
+ hw->duplex = RTE_ETH_LINK_FULL_DUPLEX;
+ hw->is_pf = 0;
+
+ if (pci_dev->id.device_id == ZXDH_E310_PF_DEVICEID ||
+ pci_dev->id.device_id == ZXDH_E312_PF_DEVICEID) {
+ hw->is_pf = 1;
+ }
+
+ return ret;
+}
+
+static int zxdh_eth_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_probe(pci_dev,
+ sizeof(struct zxdh_hw),
+ zxdh_eth_dev_init);
+}
+
+static int zxdh_dev_close(struct rte_eth_dev *dev __rte_unused)
+{
+ int ret = 0;
+
+ return ret;
+}
+
+static int zxdh_eth_dev_uninit(struct rte_eth_dev *eth_dev)
+{
+ int ret = 0;
+
+ ret = zxdh_dev_close(eth_dev);
+
+ return ret;
+}
+
+static int zxdh_eth_pci_remove(struct rte_pci_device *pci_dev)
+{
+ int ret = rte_eth_dev_pci_generic_remove(pci_dev, zxdh_eth_dev_uninit);
+
+ return ret;
+}
+
+static const struct rte_pci_id pci_id_zxdh_map[] = {
+ {RTE_PCI_DEVICE(ZXDH_PCI_VENDOR_ID, ZXDH_E310_PF_DEVICEID)},
+ {RTE_PCI_DEVICE(ZXDH_PCI_VENDOR_ID, ZXDH_E310_VF_DEVICEID)},
+ {RTE_PCI_DEVICE(ZXDH_PCI_VENDOR_ID, ZXDH_E312_PF_DEVICEID)},
+ {RTE_PCI_DEVICE(ZXDH_PCI_VENDOR_ID, ZXDH_E312_VF_DEVICEID)},
+ {.vendor_id = 0, /* sentinel */ },
+};
+static struct rte_pci_driver zxdh_pmd = {
+ .id_table = pci_id_zxdh_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
+ .probe = zxdh_eth_pci_probe,
+ .remove = zxdh_eth_pci_remove,
+};
+
+RTE_PMD_REGISTER_PCI(net_zxdh, zxdh_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(net_zxdh, pci_id_zxdh_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_zxdh, "* vfio-pci");
diff --git a/drivers/net/zxdh/zxdh_ethdev.h b/drivers/net/zxdh/zxdh_ethdev.h
new file mode 100644
index 0000000000..a11e3624a9
--- /dev/null
+++ b/drivers/net/zxdh/zxdh_ethdev.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 ZTE Corporation
+ */
+
+#ifndef ZXDH_ETHDEV_H
+#define ZXDH_ETHDEV_H
+
+#include "ethdev_driver.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ZXDH PCI vendor/device ID. */
+#define ZXDH_PCI_VENDOR_ID 0x1cf2
+
+#define ZXDH_E310_PF_DEVICEID 0x8061
+#define ZXDH_E310_VF_DEVICEID 0x8062
+#define ZXDH_E312_PF_DEVICEID 0x8049
+#define ZXDH_E312_VF_DEVICEID 0x8060
+
+#define ZXDH_MAX_UC_MAC_ADDRS 32
+#define ZXDH_MAX_MC_MAC_ADDRS 32
+#define ZXDH_MAX_MAC_ADDRS (ZXDH_MAX_UC_MAC_ADDRS + ZXDH_MAX_MC_MAC_ADDRS)
+
+#define ZXDH_NUM_BARS 2
+
+struct zxdh_hw {
+ struct rte_eth_dev *eth_dev;
+ uint64_t bar_addr[ZXDH_NUM_BARS];
+
+ uint32_t speed;
+ uint16_t device_id;
+ uint16_t port_id;
+
+ uint8_t duplex;
+ uint8_t is_pf;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZXDH_ETHDEV_H */
--
2.27.0